Touch sensitive issue - Galaxy Ace S5830 General

Hi all.
As in topic, I have issue withy me screen. What I mean - when i use 2 fingers (dual touch) after few sec by moving both finger on the screen they are freezing. No one point is moving. I tried this in Multitouch visualiser and as i said. Dualtouch is working only moment and it is freezing. Next problem is when i write sth. Sometimes letter are doubled or typed "s" or "d" even when i didnt type that. I'm using Jusada ICS and LagFreeV3.

Related

[Q] Fix multi touch and enable 3 point+

I've done a good bit of research and I'm surprised that nobody has asked how to fix the crappy multi touch streak has.
Here are the issues it currently has (tested in MultiTouch Visualizer 2):
-Does not read second touch until the finger has actually moved
-If you release the second finger without moving the first the phone will not recognize that the first finger is still touching the screen until you move it
-The screen will not register more than 2 touches (the app will just turn the screen blank when a third finger is placed)
So here is my question: Does anybody know of a way to modify the multi touch (response and number of points) through any means like build.prop or perhaps a modified kernel?
Same problem. Still looking for solution. It`s problematic with emulators and most games.

[Q] Touch input problem. Not Detecting very small movements.

Ok I noticed this little issue with the touch screen.
Maybe this is how it is meant to work but just wondering if its the same for everyone.
Basically when you first touch the screen and then move your finger in tiny movements back and forward like 2-3 pixels distance the screen just recognises your initial place you touched. It doesnt recognise the little movements. You have to make a bigger movement with your finger and then the screen starts recognising these tiny movements.
Its like its been set up with software to only track your finger if it moves a minimum distance. If this distance is not met then keep the original place where the screen was touched.
Best way to see this is get a multitouch test app from the market. Basically just one that gives you a dot under your finger when you touch the screen.
Touch the screen and move your finger in tiny movements back and forward. Like really tiny (2-3 pixels in distance)
Does the dot move or does it stay there like its stuck ?
Then you have to make a bigger movement with your finder before the dot starts moving. But after that you can do those tiny movements you did before and the dot moves.
Hope someone understands what i'm saying.
My old phone didnt do that.
Someone try this please
What about touch screen settings are their any ??
jje
sorrowuk said:
Touch the screen and move your finger in tiny movements back and forward. Like really tiny (2-3 pixels in distance)
Does the dot move or does it stay there like its stuck ?
Click to expand...
Click to collapse
Same result for me, very small movements of the finger are not registred...
I think the touch screen driver needs work or calibration, see other posts regarding screen sensitivity, screen doesnt pickup light touches sometimes, sometimes I have to make a defined press on the screen for it to work. I have decided I dont mind this now as it is less likely to pickup accidental presses but I still think it is a little under sensitive.
The thing is if you make a big movement and then with your finger still held on the screen make little small movements it recognises them. Its only when you first touch the screen it doesnt recognise the small movements.
Its like its been set up with software to only track your finger if it moves a minimum distance. If this distance is not met then keep the original place where the screen was touched.
Maybe for typing etc so you dont accidently hit another key.
Anyone else able to confirm ? See if it detects tiny movements when you first touch the screen, and then move your finger around for a bit and then try tiny movements it should work then
sorrowuk said:
Maybe for typing etc so you dont accidently hit another key.
Click to expand...
Click to collapse
Yup, definitely not a bug IMHO - just tried while playing angry birds and it nails it to the half pixel - there's nothing wrong with the hardware. I find the lack of registration of small touches a major plus, I suppose they should add a menu to disable it for those who don't like it
sorrowuk said:
Hope someone understands what i'm saying.
My old phone didnt do that.
Click to expand...
Click to collapse
I know exactly what you're talking about.
Here is a test for all of you, go onto a webpage, view it at it's native resolution, which will be bigger than your screen res.
1) Drag the screen at 180 angle directly horizontally, say to the right do this slowly and move the screen a bit.
2) Now try scrolling the screen upwards or downward, slowly and carefully without taking your finger off the screen.
3) you should find that the screen is now not responding to your careful touch to scroll in a different direction you originally was scrolling.
4) given that you seem to be locked into scrolling left or right only, drag fast and long distance either upwards or downwards (or diagonally)
5) hey presto, you can now scroll in any direction again with movements as small as you like
Its weird on angry birds, it detects these really small movements.
But on Nova HD for dragging the camera it doesnt detect these really small movements.
However if you make a big movement it then will detect the really small movements as long as you don't take your finger off the screen or you have to start over again.
Another way to see this, is on the lock screen.
Touch the lock image wait a few seconds then move your finger like 2 pixels left and right (really small amount).
The lock image won't move at all. However if you then make a big movement so the lock image starts moving (and keeping your finger still on the screen) then move your finger 2 pixels left and right it moves.
Touch the image and wait a few seconds , then move your finger
Seems like its something to do with software. Not sure how angry birds manages to avoid it.
I reckon it can be patched so it doesnt act like this. I wouldnt have a clue how to do it tho. Someone might tho
Anyone tried it on the lock screen? Same thing ?
http://forum.xda-developers.com/showthread.php?t=1072471
This?
Yep thats it there ^^^ . Thanks.
Hopefully it can be modded. Looks like samsung added a minimum threshold
Yeah I hope so too... looks very annoying.
sorrowuk said:
Yep thats it there ^^^ . Thanks.
Hopefully it can be modded. Looks like samsung added a minimum threshold
Click to expand...
Click to collapse
Its annoying when playing nova hd trying to move the crosshair

Touchscreen Swipe Lag?

I'm wondering if anyone else has had this issue. There seems to be a delay or intermittent failure to detect a swipe to scroll.
For example, let's say I want to scroll down and there is a button that I happen to start my swipe on. Sometimes the button will actually get pressed instead of the swipe getting registered. It's really annoying...
Same
I have the same issue on my cowon z2 there is a lag when swiping
I think its B&N's sloppy touch screen driver, I belive there was a group working on fixing not only the lag but also adding 5 finger touch as opposed to only two. I don't think they're working on it right now because pretty Mich everyone is working on finishing the new 3.0 kernel. But I bet work on the touchscreen driver will start up again after the kernels release.
Sent from my Team A CM9 Alpha 0.04 Nook Tablet
Yep, it turns out that touches do not register until you have swiped more than 4 pixels. That explains a lot. It also probably explains why my touch pen doesn't register very well. Hopefully they can come up with a fix. It is also good to know that I'm nor crazy. B-)

CM9 touch screen freaks out!

So i just installed the stock cm9 rom on my new touchpad and the touch screen is not usable at all. For example when i try to type it types a hand full of random letters with it in less then a second. If I hold my finger down anywhere on the screen (even if its not the keyboard) the device will start clicking random points on the screen.
Does anyone else have this problem?

[Q] Multitouch issue - hardware or software issue

Hello all,
I'd like to know if the multitouch issue I'm hitting is more likely to be a hardware or software issue.
Singletouch working normally and accurate.
Multitouch recognises fingers approx 1cm over actual position.
Trying to describe...
if I'm only using 1 finger its ok and the pointer is where my finger is but if I'm adding a second finger the pointer moves ~1cm up.
So both fingers are way below the position the streak thinks they are.
Using DSC v2.2 and dont hit this issue on a 2nd streak.
Tried to use the touchscreen calibration but didnt change anything.
Is it possible that this issue is related to the hardware?
Thanks,
You can test with "multitouch tester" from playstore
Sent from my Dell Streak using xda premium
Ok, way easier to visualise...
Seems like I've a moveable dead zone within my streak.
To explain see attached pic.
If finger one is where it is located on the pic and finger 2 is either above green line 1 or below green line 2 everything seems to work ok.
But if the finger 2 is set between both green lines both circles are set completely to the mid.
Also depending on the position of finger 1 the deadzone/green lines move.
Can this be somewhere within android and is somehow repairable or more likely hardware?
I dont hit that on a 2nd streak with dsc2.2 (so both on dsc 2.2)
I'm pretty sure it's hardware issue.

Categories

Resources