Thinnest Case That Protects Screen Edge? - AT&T Samsung Galaxy Note I717

I just upgraded from the Skyrocket to the Note yesterday. I had the Seidio Active combo on my Skyrocket. It's a great case, but it was a little bulky and the rubber was too grippy for jeans.
I'd like to find the thinnest case possible for the Note, but I want something that protects the screen edge with a slightly raised portion. The Gorilla Glass is harder to break than normal glass, but it can be broken and it scratches just as easily.
Some of the slim cases I have seen don't offer the screen edge protection, like the SPG and the Elago. Any ideas? Maybe I should just get a bumper case.

http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp

I use the Rearth Ringke slim and like it. The only raised part is on the corners, though, so you may not like it. The sides are largely uncovered.

Corvette Dave said:
http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp
Click to expand...
Click to collapse
Paying $25 for that case is just foolish.
I bought this one for $7:
http://www.ebay.com/itm/WHITE-GLOSS...802561?pt=PDA_Accessories&hash=item3371d03501
Its not that thick, its cheap and its secure.

The Boxwave Unicolor case is pretty thin. I also like that it combines TPU for the edge to protect the corners but uses hard plastic on the back to allow it to easily slide in and out of pockets. I always find TPU is just too sticky for the entire case. One added perk: The back plastic is see-thru so the phone still looks pretty stock if you like that look.
On Amazon for like $14. I think you can find other manufacturers of the same case on eBay for cheaper, but I jus tuse Amazon because it's easier. http://www.amazon.com/gp/product/B0...&pf_rd_t=101&pf_rd_p=470938631&pf_rd_i=507846

I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.

I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.

deeken said:
Paying $25 for that case is just foolish.
I bought this one for $7:
http://www.ebay.com/itm/WHITE-GLOSS...802561?pt=PDA_Accessories&hash=item3371d03501
Its not that thick, its cheap and its secure.
Click to expand...
Click to collapse
I would have to agree. I usually take off the case after a few months. The thinnest case I found is .2mm from this guy.

Barry (NJ) said:
I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.
Click to expand...
Click to collapse
Holy sh*t! Less than 2 bucks delivered from Hong Kong? How does this guy make any money?

Corvette Dave said:
http://www.case-mate.com/Samsung-Ga...g-Galaxy-Note-Note-LTE-Barely-There-Cases.asp
Click to expand...
Click to collapse
I don't think the Barely There cases allow you to lay the phone face down without scratching the screen.
LiquidArrogance said:
I use the Rearth Ringke slim and like it. The only raised part is on the corners, though, so you may not like it. The sides are largely uncovered.
Click to expand...
Click to collapse
I think this one may be the slimmest, but it doesn't look like it allows you to lay the phone face down either.
Barry (NJ) said:
I got a clear TPU case, both form and function are just fine. It comes up and over the edge of the screen just enough to add some protection, and easily slides in and out of all my pockets, and my jeans don't hang off of me I got it from this guy for just $1.99 delivered.
Click to expand...
Click to collapse
This case looks promising as long as it doesn't stick in my pants pocket. For $1.99, I can afford to try it out.
dcfella said:
I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.
Click to expand...
Click to collapse
As I said in my post, the Elago does not protect the screen edges.

I really don't think any of the ultra-thin cases have screen lip protection. I have the Elago, but rarely use it. Find a slightly bigger case that does and make the compromise. I love the Zenus Air Capsule. It has a screen lip, has a kickstand, hard plastic so it slides in and out of pocket easily and is less bulky than the Speck, Casemate and most of the other "mid" protection range cases. Just my 2c!
Sent from my Samsung Galaxy Note LTE™

S-Line tpu cases are thin and have a lip above the screen.
Sent from my SAMSUNG-SGH-I717 using XDA

dcfella said:
I got this case:
http://www.amazon.com/elago-Slim-Ca..._1_1?s=wireless&ie=UTF8&qid=1331234426&sr=1-1
Having used Barely There cases in the past, I'd say this is just as thin, same quality, and much cheaper.
Click to expand...
Click to collapse
I have never used the Barely There case or Elago but in the screenshots on amazon of that elago case, it looks like the bottom is unprotected. Is that how the Barely There case is as well? I currently use the RearthUSA Slim case which I like but it seems a little too think. I would like to get something thinner!

Related

Best case?

I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
It's a $500+ phone you have. If you're ok with it breaking, then go without a case.
That's not saying it will break. There are plenty of stories about how well this phone does when dropped.
But it's the same reason people wear seat belts. 99% of the time they don't do much. But that 1% when you're in an accident, you're really happy you had it on.
It only takes one bad drop to ruin your phone. And screens for samsung devices are super expensive.
Sent from my SAMSUNG-SGH-I777 using XDA App
SupremeOverlord777 said:
I definitely would. Protects from scratches, marks, and dust. I wouldnt count on it to protect from a normal drop though. I would suggest the Otterbox Commuter (make sure its the ATT i-777 version)
Click to expand...
Click to collapse
Are you sure that Otterbox makes a case for the AT&T version? I checked around and only found a Commuter for International version.
I have an Otterbox Commuter now for my iPhone and love it.
They just released an att version for the otterbox commuter. I have the international and its fits flawlessly. The top Mic cut out is off but the call quality is still the same. Paid 20 bucks on Amazon for it
Sent from my SAMSUNG-SGH-I777 using xda premium
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
cheetablaze said:
They just released an att version for the otterbox commuter.
Click to expand...
Click to collapse
You sure? I checked Otterbox's site and Amazon. Can't find it.
iFalcon said:
I just received this one and it fits flawlessly. They have 2 or 3 different colors. This one is a matte finish on the back and does not show any fingerprints and the TPU material feels great in the hand.
http://www.ebay.com/itm/260867073633?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Click to expand...
Click to collapse
Thanks! I'm looking at some TPU cases. Are they durable?
Just found a really cool one http://www.amazon.com/gp/product/B005OT75K0/ref=cm_ciu_pl_B005OT75K0_mo39VUI8EBFWYGJ
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
mzaur said:
I just got a GS2 and trying to decide whether or not to get a case. Do you guys suggest getting one for added protection from drops?
EDIT: Ok, clearly a case is necessary, but which one? I have an Otterbox Commuter on my iPhone and dig the feel and durability. I see many complaints about SG2 cases not fitting or not having the right holes. Which is the best case in terms of fit, durability, and feel?
Click to expand...
Click to collapse
This is going to depend a lot on how you use your phone. I am using the casemate barely there which provides a moderate level of drop protection while maintaining the slim profile and light feel that I really love about the Galaxy phones. But when I need to travel for work I put on the Ballistic case which has huge rubber corners and feels indestructible which is nice when you are moving around a lot and adding a much greater risk of dropping your phone. The otterbox commuter is a decent case, my wife has one on her iPhone 4. It seems to be a nice middle road between something like the "barely there" and the Ballistic.
Did you drop your old phone a lot?
mzaur said:
You sure? I checked Otterbox's site and Amazon. Can't find it.
Click to expand...
Click to collapse
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
There is a balance between protection and bulk in cases
I don't want a case that inhibits the phone from venting heat. And I don't want one that is too bulky. I've tried a lot of different cases, and this is the one that I like best:
http://www.ebay.com/itm/320771114659
Just don't drop it from too high above a floor that's too hard, and it should protect the phone OK. And at this price you can get a couple of them as spares, since they will crack occasionally.
The other thing about this case is the matte rubberized finish. Helps the phone to stay put in your pocket. It also makes the phone feel much more secure when holding it in your hand.
Here's a list of many of the available i777 cases:
http://www.traemcneely.com/2011/10/...i777-samsung-galaxy-s2-sii-cases-covers-sgs2/
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
mzaur said:
Thanks! I'm looking at some TPU cases. Are they durable?
Click to expand...
Click to collapse
TPU cases have a tendency to stretch if you take them on and off too much. I had one for about 2 weeks and it was already feeling loose and I was only taking it on/off about once a day.
And they attract lint like mad. The reason I was taking it off daily was to rinse it off.
Sent from my SAMSUNG-SGH-I777 using xda premium
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
cheetablaze said:
The SGS ballistic case is way too big and the bumpers snag in your pocket. The case mate pop is great as long as you don't mind the shiny back scratching all to hell in two weeks. Also the grey plastic around the edge flakes off really easily. The commuter is smaller than both and likes to draw dust... The thin cases will never completely protect your phone. Always had otterbox, always will keep using otterbox.
Click to expand...
Click to collapse
I agree with your line of reasoning here. I loved the Otterbox on my iPhone. I liked the hardness of it. My girlfriend had an Otterbox Defender and that was just too much. Did you pay $35 for the Otterbox?
cheetablaze said:
Here you go
http://www.otterbox.com/Samsung-Gal...r=20&start=1&cgid=samsung-galaxy-s-2-cases-us
Click to expand...
Click to collapse
35 bucks! Damn. Not any cheaper on Amazon. That's a bit too much for me.
Thanks guys for the tips. I ordered a couple cheap hard TPU cases like some recommended here to see how they are. Perhaps I'll need more protection and look into something else.
I didn't drop my old phone a lot, but I did once in a while drop it from my desk. I don't have insurance on my GS2 so I would like some protection in case it drops since the phone feels fairly fragile.
Can anyone recommend a middle of the line case between thin TPU cases and the Ballistic? I know Otterbox is along those lines but $35 is too much!
maybe the case-mate pop. conflicting reports on whether it has the right holes or not. it also has the built in kickstand
---------- Post added at 06:20 AM ---------- Previous post was at 06:19 AM ----------
oh, also, the otterbox should come down in price soon, like the intl. GS2 version has.
I have the casemate barely there and the casemate and the casemate full version. Both work great and give flexibility.
Sent from my SCH-I800 using xda premium
The Case-Mate Pop! is the best I've found. It is a hard plastic case that is lined on the inside with rubber for shock absorption. It also has rubber inserts on the outside along each edge. Has a very solid feel with good grip. There is also a fold out stand but I don't really use it that often. Nice feature to have though.
It does add a little to the bulk of the phone but not as much as the Otterbox or other heavy duty cases. I found it a good compromise between size and protection. I think it's well worth it for something that fits perfectly and feels really good in the hand.
All of the holes line up perfectly on this case even it's categorized under the International SII. The noise canceling mike on top is included in the microphone cutaway. No noticeable difference in signal quality or phone call quality.
Sorry, tried to post a link but I'm too new. You can go to Case-Mate's website and look under the Samsung Cases, Samsung Galaxy SII, International version.
I have the Casemate Barely There Aluminum, SGP Linear, and some mesh one I got for $3 on ebay. Out of all of these I prefer the SGP Linear. It completely protects the phone, leaving no edges exposed, feels like quality, and keeps the slim profile of the phone. I had to make a little hole for the noise cancelling mic but that was easy.

So what's the most lightweight case with decent protecton out there?

As the tile asks.
Was going for the Neo Hybrid, but saw on YouTube videos that it adds a significant amount of bulk to the phone, also in dimensions, and it's not that sturdy anyway!
So I need a lightweight case, which will protect the phone, should have a decent amount of lip at front to protect the screen, and the case itself should not be fragile. I find it meaningless when a case requires not to be dropped. I am scared about dropping the phone, that's why I need a case at first place
I personally love UAG cases, but I don't like the hardcore industrialist look on them any more, I need something very simple yet elegant looking, like the Neo Hybrid.
Thanks.
Look at the UAG. Its pretty lightweight but may be more bulky than what you are looking for
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
1slow4G said:
Body glove dimensions case I have seidio surface now but does add weight because of the metal kickstand
Click to expand...
Click to collapse
This is not available in my location.
SilentJ20 said:
I've been happy with my Tech21 Impact Tactical case. Good protection for when I need something besides a slim hard case.
Click to expand...
Click to collapse
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
devilsdouble said:
This is not available in my location.
Nor this one!
I guess I will have to stick with mainline brands Isn't there any bumper case for Note 3? A good one I mean. I just need to protect the corners, and a bumper should do that just fine, isn't it?
Click to expand...
Click to collapse
I also have the bearmotion bumper. Really love that bumper.
1slow4G said:
I also have the bearmotion bumper. Really love that bumper.
Click to expand...
Click to collapse
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
devilsdouble said:
Well this is listed here, but at an awful price! LOL!
http://www.amazon.in/Bear-Motion-Premium-Bumper-Samsung/dp/B00F5QIVLO
I guess I will have to look for a different bumper case. I just love the feel and look of the back side of my phone so much that I won't like to put on a case other than a bumper.
Click to expand...
Click to collapse
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
1slow4G said:
[emoji15] [emoji33] that is expensive. that's the reason I liked the bumper so much. Feels great and protects camera and screen when laying flat.
Click to expand...
Click to collapse
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
devilsdouble said:
Could you tell me does this bumper have a cutout for the microphone at lower right side of the phone (not the one at bottom), almost at the corner? Cause most bumpers don't!
Click to expand...
Click to collapse
Yes it does. That's the temperature/humidity sensor btw
Have you looked at Otterbox?
ShadowLea said:
Have you looked at Otterbox?
Click to expand...
Click to collapse
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Right now the only option for me is to get a bumper, and in bumpers I can only have two, that Bear Motion one as suggested on previous page or some Amzer one, called Border Case or something, but I have no idea if that case has that cutout for the temperature sensor! Has anyone ever heard of this brand Amzer before? I certainly haven't! This is the case I am taking about,
http://www.amzer.co.in/Amzer-Border-Case-Black-P97313.htm
If that case doesn't have the cutout then my only option is to go for the Bear Motion one, but I don't think paying 2X price than what it's worth is reasonable by any means.
Lets see.
devilsdouble said:
Which one? Commuter or Defender?
They are the ultimate cases for protection, but then again they look very tough and rugged, which I won't like for the Note 3.
Click to expand...
Click to collapse
I've got the Commuter. It's a lot more elegant in reality than it looks in the pictures. (At least the black one is). But yes, it's a but bulky. It doubles the thickness if you count the rim on the front as well.
But if you want protection, something slim and sleek will not do much good. I've looked for those options, but they're all more for show than actual protection.
The diztronic tpu might be what you're looking for. Uag, spigen or especially otterbox are far from lightweight. I own the uag and I can drop the phone on any kind of surface without blinking, that case has serious protection. Otterbox is a tank, for construction people.
Yeah thanks guys.
@ShadowLea: Yeah I know that a bumper will not protect the device like an Otterbox would do or a UAG, but I am not looking for that much protection, just protecting the corners will do fine in my case, I think.
@lvnatic: Thanks. I know about UAG and Otterbox. I have used the Maverick on my S4 for a good four/five months, and it can protect the device in a lot of situations, but then I got tired of its look, too rugged, and that too when S4's backside was all glossy cheap type of plastic. For Note 3 and its backside material I can't think slapping a case on it, I just love touching that fake plastic It feels too good. If it were Note 2 or S4, I would not think a second before putting a case on it, because they felt that gross, to me.
Anyway, thanks all for the suggestions. For the time being I am going with a bumper, if I change my mind and consider a more protective case later then I will surely consider the suggested cases in this topic.
Does anybody know of a case that'll work with Samsung's wireless charging battery panel?
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
djak272 said:
Sipgen neo hybrid case
Bit expensive but kinda worth
Its been almost a year since i had it for note 3
Click to expand...
Click to collapse
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
1slow4G said:
Funny you posted this at the same time I added one to my cart on amazon lol. How slippery is it realistically? That's my only concern.
Click to expand...
Click to collapse
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
djak272 said:
The edges are firm but back, its bit slippery
anyways
its an awesome case bro
You won't be disappointed
Click to expand...
Click to collapse
Figured that was the case (see what I did there ?)
I'll give it a try then, the looks are deceiving lol
What color you have? I'm stuck between slate and sliver

MoKo Holster Cover with Kickstand and Belt Clip Swivel [Heavy Duty] Rugged Protective

Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
zephiK said:
Your URL doesn't work. I believe http://www.amazon.com/Google-Nexus-Case-Kickstand-Protective/dp/B00E4RV8DS is it?
Click to expand...
Click to collapse
Yeah thanks that's it! Not sure what went wrong with the URL
msd24200 said:
Just ordered one and I will try to keep everyone posted on how it works out. $5.95 hopefully this will work out for those of us that need a more rugged case! http://www.amazon.com/dp/B00E4RV8DS
Click to expand...
Click to collapse
There another OP for this case, it actually increased to 3x what it originally was. It was 1.99 a week ago.
I'm already using this case, it's amazing for $1.95
agreed i picked up this case on the 9th when it was for pennies. for the price it far exceeds in all areas. OP you will enjoy it for sure.
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Thanks for the info everyone
PaisanNYC said:
I bought this case when it was $1.95 on Amazon Prime, and I have to say, I actually feel more secure with the phone in a Spigen. The moko's "rubber" shell is too lose, and the plastic case is too thin and flimsy, much more thinner than a Seido Dilex or an Otterbox Commuter. I think I may just stick with a Neo Hybrid for now and just give away the Moko to someone on XDA.
Click to expand...
Click to collapse
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
swiftchancelor said:
Totally agree with you. I got this case when it first became available. It has a really nice feel and looks great. However the tpu inner/outer shell is very flimsy, especially around the lip of the phone and has the look and feel as though debris could easily enter from the cutouts. The fitament on the phone in the case itself is just OK. The phone does not clip in, rather it slides in from the side making it awkward for some to quickly access. If your looking for something to put on your belt it works.
Sent from my Nexus 6
Click to expand...
Click to collapse
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Skripka said:
It isn't TPU, it is rubber...and the fit on my 32GB N6 is great...only complaint is that the holster doesn't have a locking clip. For a sub-$10USD rugged case you cannot do better. Heck Seidio and Platinum sell the same thing for $60USD for other phones.
Click to expand...
Click to collapse
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
PaisanNYC said:
The Seidio Dilex line of cases are more sturdy and rugged. And the Seido spring-loaded holsters make it quicker to release the phone off the belt. The Moko is a great sub-$10 case, but it cannot go up against a Seidio/Platinum case.
Click to expand...
Click to collapse
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Skripka said:
LOL....as an owner of a couple Seidio cases and a Platinum case...the Moko comes from exactly the same Chinese OEM and is made from exactly the same stuff (rubber/plastic). The only difference being Seidio has a metal kickstand.
Click to expand...
Click to collapse
Got proof or just heresay?
PaisanNYC said:
Got proof or just heresay?
Click to expand...
Click to collapse
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
So it's speculation. Just wanted to make it clear. Thanks
Skripka said:
The proof is in that Platinum, Seidio, and Moko have not sued one another for copyright or trademark infringement over the years. They're all that identical in design and quality.
We live in an age where people sue for using rounded corners.
Click to expand...
Click to collapse
Lol, you ain't lying about the lawsuits. I should be getting the i-blason case here in the next couple days, it was actually sub $10 when I scooped it up as well. Looks almost the same minus the holster and the design on the rubber, even the plastic outter clip looks identical. Don't get me wrong, the Moko isn't bad at all.. I'm just a bit ocd about the loose edges and small gaps near the cutouts. I feel like over a short period of time they'll get lose.
Sent from my Nexus 6
I may order one of the poetic revolution cases while they are still cheap. My moko should be her on 12/3
Ordered the orzly tempered glass screen protector a few minutes ago as well
OK the moko came in today and first impressions are really good! Not sure yet how it will hold up but the fit is great. All the buttons feel great! The case actually looks pretty good (granted looks are in the eye of the beholder as they say). The kickstand doesn't seem to bad. For a rugged case, its actually surprisingly slim which may make a lot of people happy.
Now for the bad as others have mentioned pulling the phone out of the holster causes the rubber part of the case to pull away from the phone. Not real bad but it does. The phone slides into the case but its a tight fit.
All in all I paid $5.95 + shipping on Amazon for this case and initial impression is for that price if you need a case it's a great buy. Just noticed the price is now $6.95 so if your looking for a decent cheap case I'd buy it before the price goes up. I'm going to use it until I find a satisfactory higher end case.
I did order a poetic revolution case as well and when it comes in I'll let you all know who it is.

What Case Has Provided The Best Protection? This is For The Regular S7.

Was just Wondering What Case Has Provided You With The Best Protection With Your Phone? Was Just Wondering Cause I Have The Otter box Commuter And Just Wanted To Make Sure I Chose The Best Case That Will Protect My Phone. Thanks for the feedback! I will hit that like button.
Any cheap rubber or plastic case that is higher on all four sides than the screen will protect the phone amazingly. After that it is just a matter of style and materials to your preference IMHO. A 1 dollar case off ebay or aliexpress will protect the phone fine. It might look like crap but it will protect the phone AFAIK.
Do you care only for protection or also for compactness?
First of all make sure the case you want to buy is military grade tested.
For pure protection you should buy a case with a front tpu cover like poetic revolution, otterbox got one i think as well.
If you care for protection but also for compactness then i would go for UAG, Evutec or otterbox symmetry or spigen slim armor if on limited budget. There are more, i am just naming a few.
Go with the "Unicorn Beetle" case. It's compact and hugs the phone great. Great protection, screen protector and comes with a strong holster. I've had this case for all of my phones. Great product and the price is right on ebay for about 17 to 25 dollars!
http://www.ebay.com/itm/SUPCASE-Uni...172310?hash=item2caedb5b16:g:ifEAAOSwgY9Xd~CX
amirprog said:
Do you care only for protection or also for compactness?
First of all make sure the case you want to buy is military grade tested.
For pure protection you should buy a case with a front tpu cover like poetic revolution, otterbox got one i think as well.
If you care for protection but also for compactness then i would go for UAG, Evutec or otterbox symmetry or spigen slim armor if on limited budget. There are more, i am just naming a few.
Click to expand...
Click to collapse
I just want protection.
HolyGhostBoy1 said:
I just want protection.
Click to expand...
Click to collapse
Then aside of defender i'd check these as well (full protection):
http://www.poeticcases.com/revolution-59
http://www.lovemeicase.com/index.php?route=product/product&path=87_165&product_id=55357
http://www.lovemeicase.com/index.php?route=product/product&path=87_165&product_id=55346
midnightrider said:
Any cheap rubber or plastic case that is higher on all four sides than the screen will protect the phone amazingly. After that it is just a matter of style and materials to your preference IMHO. A 1 dollar case off ebay or aliexpress will protect the phone fine. It might look like crap but it will protect the phone AFAIK.
Click to expand...
Click to collapse
I completely agree with you. My case who had raised sides, protected my phone from a 2 ft drop on tiled floors. Dropped on bottom left corner first, then stopped screen down. To my amazement no crack or scratches on the front & back glass.
My case:
https://www.amazon.com/Ringke-Snug-Fit-Tailored-Ultra-Thin-Coverage/dp/B01ACAUFR0
I use the incipio dual pro on mine and it has survived many accidental drops Adds a tiny bit of size but I personally like the grip and size much more with the case on. Also power button and volume buttons on the case feel great and I never accidentally press them.
https://www.incipio.com/cases/smart...ries-case/dualpro-samsung-galaxy-s7-case.html
I got pelican voyager, paid too much for it but it's all I'll need
+1 on the Incipio DualPro.
I also like, in no particular order, the Vena Tough Armor Wave; Diztronic Voyeur Series; Spigen Tough Armor; and the OtterBox Symmetry Clear Series.
djh816 said:
I use the incipio dual pro on mine and it has survived many accidental drops Adds a tiny bit of size but I personally like the grip and size much more with the case on. Also power button and volume buttons on the case feel great and I never accidentally press them.
https://www.incipio.com/cases/smart...ries-case/dualpro-samsung-galaxy-s7-case.html
Click to expand...
Click to collapse
you made a good choice! I use my Otterbox Commuter every day. It's always my first choice of case when I get a new phone. Great protection, but not as bulky as a Defender case.
RebDovid said:
+1 on the Incipio DualPro.
I also like, in no particular order, the Vena Tough Armor Wave; Diztronic Voyeur Series; Spigen Tough Armor; and the OtterBox Symmetry Clear Series.
Click to expand...
Click to collapse
Spigen tough armor are awesome cases. I had one for my S5. Love it.
I have a Rugged Armor for my S7 and love it as well.
I've personally been using a case-mate tough. Pretty good and the buttons feel great.
I'm using rhinoshield with no regrets
Sent from my SM-G930F using XDA-Developers mobile app
Puregear extreme dualtek
Sent from my SM-G930V using Tapatalk
Hey, personally, I'm using this Spigen case:
https://www.amazon.fr/gp/aw/d/B01A7ICWTQ?ref=olp_product_details
Really great and give a good protection for the phone.
Envoyé de mon SM-G930F en utilisant Tapatalk
Actually Commuter is a very protective case for your S7. I'm using it too. But you know that there is another series from Otterbox that is more protective but also more bulky than Commuter, that is Defender.
I have an Artech21 Little Rock for my "rugged" case. It's "Military Grade" and whatever other fancy catchphrases you wanna use. But I don't put much stock into those phrases... It's fairly difficult to install/remove. Because of that, the phone won't pop out, even if you were to throw it as hard as you can across the room (that's not to say the phone would survive inside). But the case IS plenty strong. Honestly, my only 2 complaints are that A) the tempered glass is like a half inch more narrow than the screen (but at the time of purchase, not a single tempered glass screen protector covered edge to edge flawlessly (loss of sensitivity, haloing, etc.). And, B) I'm not a big fan of the designs. When other models like the Vivid Arkansas look so damn unique good. The Little Rock just looks super plain. Of the cases I own, the Little Rock is easily the strongest, while the Vivid Arkansas is much thinner, it looks MUCH better. And it still provides plenty of protection itself. And I can't speak for cases I don't own. But the Little Rock is easily the toughest. The Vivid Arkansas looks the best. And while it doesn't provide the hardcore protection of the Little Rock, it has saved my phone on a few drops, one I expected to be bad. But not a scratch

Best slim case I've found yet

First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
I bought this https://www.amazon.com/gp/product/B06XH1PWX9/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 and really like it. It is slim enough for me and has great phone protection.
I've ordered this one. Clear and thin.
https://www.amazon.com/Trianium-Res...d=1493470061&sr=1-1&keywords=trianium+s8+case
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
the thinnest case would be ones made out of polypropylene. some of them get as thin as PAPER. others get thicker/harder plastic feel, but no real point as any drops will crack your glass...
I always buy TPU thermo polyurethane which is very resilient and i've been surprised a few times on how it protected my phones. the thinnest TPU i found are the CIMO
https://www.amazon.com/Galaxy-Cimo-...011&ie=UTF8&qid=1493474636&sr=8-5&keywords=s8
I have the Spigen which is too thick, back side measuring 1.4mm on my calipers
EasyAcc TPU which i'm rocking right now which is 1.3mm
Cimo which hasn't come in yet, but... I've had them for s6 and s7 and it only measures 1mm
I like to cut a small hole and mod the TPU cases so that it works on my modded magnetic charger.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
AdamIsYou said:
I have this case. It's really nice. Fits well, and really is the thinnest possible case at just .025" thick. I must say it is a little slippery even after using it for a few days. I'll probably try and find a similar one that has a bit better grip, but I would certainly recommend it.
I'd also like to mention there is a small raised lip around the camera opening make the fingerprint reader easier to find while adding a little extra protection the camera.
Click to expand...
Click to collapse
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
arampapaz said:
Got this one today and it is sweet. Super thin and I like that it covers the buttons.
http://www.ebay.com/itm/232311855985
Click to expand...
Click to collapse
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
SptMogul said:
I just received this case and it's super slippery.
thinking to try the one that OP bought https://www.amazon.com/gp/product/B06Y98H8C7
or
this eBay one http://www.ebay.com/itm/232311855985
How do you like the case so far? is it slippery at all? what is it made out of?
Thanks
Click to expand...
Click to collapse
Loving it so far. It is a bit slippery though, not like other TPU cases I have which provide more grip. The separation between the camera and fingerprint scanner is a nice touch too. I'm guessing it is made from some sort of TPU., it is soft and flexible but not silicone. Be aware this is very light protection. I just wanted something to prevent scratches caused by everyday use. I was going to go naked, but this is pretty close and gives some protection.
I'm loving the new spidgen neo hybrid case
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
ElBeaner said:
First off, I have ZERO affiliation with this company - I paid full price for the case and waited 2 weeks for it to come from China (I had this case with my V20 and was happy they made it for the S8)
I have bought slim cases from Ringke, Spigen, Caseology for the S8 (all from Slickdeals $$$ off posts) and so far all of them felt a bit too slick and thick(compared to what I've experienced with other phones).
I don't know why more companies don't use the "Salient point" design (what this company calls the textured back)
Makes it extremely easy to hold the phone and a good feel in the hands.
Is it worth $10 when you have other slim case options out there for much less (with promotions)? Since I've experienced the feel of it previously I personally think it's worth it. I do wish they had US stock and didn't ahve to wait so long for it.
Now I will say this thing is THIN, like this is going to offer almost no protection from a drop thin (you get corner and back protection but that's about it). I didn't get it for that, I got it to help with holding the phone. Will a skin accomplish the same- probably and I've considered the Dbrand Dragon skin too.
I will say the case fits SNUG - I had a hard time getting it off to take some pics of it
If you're interested this is the link where I got it on Amazon
https://www.amazon.com/gp/product/B06Y98H8C7
Click to expand...
Click to collapse
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
hejay said:
I also have the Nillkin PC Ultra thin case and have also found it to be to best compromise between offering decent protection and staying pretty slim. There also a tiny lip on the screen side so that it won't rest the glass on surfaces. Looking at it from the front, you can hardly tell that the case is on. The Nature TPU case by Nillkin is also very nice, but you can only get it from China at the moment.
Click to expand...
Click to collapse
They're now available on Amazon with prime shipping
Still rocking this case and love it
kz121 said:
Not sure what spidgen case(s) you've tried this far but I absolutely love the neo hybrid case...
Highly recommend this one...
Check this out: Spigen Neo Hybrid Galaxy S8 Case Herringbone with Flexible Inner Pr... https://www.amazon.com/dp/B06XP521V1/ref=cm_sw_r_sms_awdb_thRbzbWYMDS0A
For under 15bux hell, I bought 2 (different colors)!
Look, this case is meant to be a minimalist case so I'm not messaging any claims about what would happen if you dropped it face (screen) first onto gravel or an uneven surface but face first on a flat surface the screen is protected and any other basic drop on a corner, back or side I'm fairly certain it would be fine... I'm even able to charge on a Samsung qi wireless charger with the case on...
The textured back is perfect for holding it and gives the phone a nice secure fit to your hand...
I'd give it a 9/10 as it could use a little motmore stand out protection at top and bottom to better protect The screen - but that said, this case is soo thin you won't even notice it on your front jeans our slacks pocket... its seriously svelte...
I picked up spidgen's screen protector 2pk and it's just ok not a fan of The clarity but it's staying put without issue in this case and will have to do until zagg remedies their issues with Their tempered glass for the s8 which is virtually useless and not very case friendly... (if anyone has found a good tempered glass protector for the s8 please tag me or pm me -ty)
Chris
Click to expand...
Click to collapse
Could you tell me how much it weighs? Amazon lists 1.4 ounces for both item and shipping weight. That's way to heavy for me.
ElBeaner said:
They're now available on Amazon with prime shipping
Still rocking this case and love it
Click to expand...
Click to collapse
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
i bought this
https://kase.com/collections/s8
hejay said:
Really? The only nature cases that I've found are shipping from China on Amazon at the moment.
Click to expand...
Click to collapse
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
llaugerm said:
Here is the slimmest case I have ever seen:
https://www.amazon.com/gp/product/B06XHFYJM7/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Looks nice. It has a small lip at front to protect the screen?
Vogal said:
Looks nice. It has a small lip at front to protect the screen?
Click to expand...
Click to collapse
No Protection with this case. It clearly says in description only for scratch. If you want full protection I would suggest that you get this one from Samsung is very slim:
https://www.amazon.com/gp/product/B06XHWHYLV/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Bets case I ever had
Spigen Thin Fit Galaxy S8: https://www.amazon.com/gp/product/B...54BCW&linkId=325db0677b883d6c92a8d1a83ac09792
Spigen Thin Fit Galaxy S8 Plus : https://www.amazon.com/gp/product/B...4LGHJ&linkId=22db5b6f758a85f0a88aaa7787bd29bb
ElBeaner said:
https://www.amazon.com/Samsung-prot...TF8&qid=1493729049&sr=8-1&keywords=nillkin+s8
There is the S8 model
S8Plus model
https://www.amazon.com/Samsung-prot...id=1493729085&sr=8-5&keywords=nillkin+s8+plus
Click to expand...
Click to collapse
How is the grip
---------- Post added at 05:05 AM ---------- Previous post was at 04:49 AM ----------
Does the olixar flexishield actually have something special for grip? They say it's a non slip coating but is it any different than regular tpu

Categories

Resources