Im so pissed off at this phone. Supposed to be fast but my browsing experience sucks because of this delay between 3g/h+
Before I get flaimed I have read before, I tried fast dormancy off, I tried disabling H+ and putting 3g only but the same delay exists. I also tried putting the phone in wcdma mode so edge gets removed.
I don't know what to do, I came from an iphone 4 and although the pages load slower because of hardware I could actually see the data progress going and loading up, here my sgs2 just stands for 10 seconds doing nothing and then loads up the page fairly quick.
Sometimes it doesn't even load and says page could not be loaded even though I have the h+ icon on.
Now If anyone experiences this and has some sort of fix plz let me know.
Im running westcrip 9.6 with lph, and have had this issue in previous roms too.
My network is Claro Dominican republic
Thanks
I have a similar problem! In my case the phone suddenly switches from H to 3G, I don't know why, and then goes back to H. This happens while I'm using browser, generally when I activate data connection and I don't use anything, it remains on 3G
My problem is that sometimes the delay may be 2 seconds and its managable but then it can go up to 15 or not do anything at all.
Same problem, I thought it's ok, but if it's not, then how to manage your data, without any delays?
just in case for someone who might know how to fix your problem u should give them/us information about:
your rom
your kernel
your modem
rooted or not
ps. wrong section btw...
warrez said:
just in case for someone who might know how to fix your problem u should give them/us information about:
your rom
your kernel
your modem
rooted or not
ps. wrong section btw...
Click to expand...
Click to collapse
carrier and location (country) would be good too.
EDIT: whoops, saw it's in the first post. Sorry.
Its normal to go from G to H+ when data is in use. As soon as the phone detects that it needs to access the network, it will achieve the H+ connection. Apparently it will kill the battery if its always on H+. This, I understand. But the part I do not understand is the delay from G to H+. I am not sure if its a carrier issue for most of us, or the phone itself. I am assuming its a carrier issue though as it has happened on every ROM or Modem I have tried from personal experience. Not sure about the OP. It does seem to take some time at times to get from G to H+ - upwards of 15 seconds or more. Also, if it can't get H+, it will not browse at all on 3G
blue265 said:
Its normal to go from G to H+ when data is in use. As soon as the phone detects that it needs to access the network, it will achieve the H+ connection. Apparently it will kill the battery if its always on H+. This, I understand. But the part I do not understand is the delay from G to H+. I am not sure if its a carrier issue for most of us, or the phone itself. I am assuming its a carrier issue though as it has happened on every ROM or Modem I have tried from personal experience. Not sure about the OP. It does seem to take some time at times to get from G to H+ - upwards of 15 seconds or more. Also, if it can't get H+, it will not browse at all on 3G
Click to expand...
Click to collapse
I get the same issue with the 3G. It won't load anything on 3G connection but as soon as it switches to H or H+ it starts to load.
imlgl said:
I get the same issue with the 3G. It won't load anything on 3G connection but as soon as it switches to H or H+ it starts to load.
Click to expand...
Click to collapse
Yep, same problem in Moscow. It's probably related to device, nor to carrier. Kinda odd.
imlgl said:
I get the same issue with the 3G. It won't load anything on 3G connection but as soon as it switches to H or H+ it starts to load.
Click to expand...
Click to collapse
+1 for that..hate that...
So i guess there is no fix for this
Sent from my GT-I9100 using xda premium
mcvigo said:
So i guess there is no fix for this
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I don't think so. Seems to be a device issue. I just took a look at my Blackberry Bold 9900 I use for work and it always has H+. It doesn't go to 3G and then to H+ like the SGS2 does. And when I browse on that, its always ready to go, no delay. Not sure why our SGS2 needs to handshake H+ everytime
In my case it seems to depend upon the modem I use. kL1 works really well, however when I trialed ICS it was really slow as described.
Also, far less related, as for the mention of browsing, I use Dolphin and find that it seems to be much slower at either DNS lookups or redirects or something.
It's most likely because of your carriers settings. There's nothing you can do unless you call them questions about what their policy is at their end on data connectivity.
Related
Hi
Does anyone know how to fix this issue? I am in a good area for signal and with previous phones am consistently on H. With my S2 it frequently switches between 3G and H even if it stays in the same spot. It will do it every few minutes.
This is causing havok when I try and tether and my Transformer and laptop keep getting signal interruptions.
Does anyone have a fix? I have Fast Dormancy disabled and I'm aware there may be some other engineer menus that have signal settings in that might work?
Thanks
Paul
Sent from my Transformer TF101 using XDA Premium App
Interesting.. And I thought it was just my network vodafone
Mine also switches between G/H/H+ all within 5 secs... yeah 5 seconds and it is kinda annoying.
Are you on GIFFGAFF as stated on you profile? or other network? cause I thought if might have do to something with vodafone..
Otherwise may be its something to do with the hardware settings, I too would like to know the answer
I've kept mine to use WCMA all the times...
tfn said:
Interesting.. And I thought it was just my network vodafone
Mine also switches between G/H/H+ all within 5 secs... yeah 5 seconds and it is kinda annoying.
Are you on GIFFGAFF as stated on you profile? or other network? cause I thought if might have do to something with vodafone..
Otherwise may be its something to do with the hardware settings, I too would like to know the answer
Click to expand...
Click to collapse
Yes, I'm on giffgaff.
Glad its not just me. Maybe the antenna is a little too sensitive.
Anyone know the secret code to get to the GSM/UTMS bits?
Sent from my Transformer TF101 using XDA Premium App
TheMathMan said:
Yes, I'm on giffgaff.
Glad its not just me. Maybe the antenna is a little too sensitive.
Anyone know the secret code to get to the GSM/UTMS bits?
Sent from my Transformer TF101 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1069015
This thread has lots of codes, if any help i have no clue which might help us
OK. Found the 2263 code but that seems to want to enable/disable actual bands.
Am I looking into it too hard!?
Sent from my Transformer TF101 using XDA Premium App
hazem77 said:
I've kept mine to use WCMA all the times...
Click to expand...
Click to collapse
Now, for me wouldn't 3G and H/H+ both be considered as WCDMA under Mobile Network Settings? G and E would be GSM right?
If that is the case, staying on WCDMA wouldn't fix the problem.
Sent from my Transformer TF101 using XDA Premium App
Your phone shouldn't lock onto a H/H+ signal unless it has started to download data. That's how the protocol works.
If your phone is sitting idle it should be on 3G.
You should only get H/H+ when your phone is actively downloading.
Your phone shouldn't lock onto a H/H+ signal unless it has started to download data. That's how the protocol works.
If your phone is sitting idle it should be on 3G.
You should only get H/H+ when your phone is actively downloading.
Click to expand...
Click to collapse
OK. So how can I stop it flicking between the H and 3G. For instance when I am trying to stream it will get interrupted, or if I'm wirelessly tethered?
Sent from my Transformer TF101 using XDA Premium App
i'm from tunisia and have the same pronlem here.
Please developers help us to get rid of this 3g/h issue.
Guys,
I got the same problem here i n Brazil using a VIVO carrier.
I set in CONFIG -> WIRELESS AND NETWORK -> MOBILE NETWORKS -> NETWORK MODE -> WCDMA ONLY
I don`t know why it worked but now its working fine.
Could you test?
Rgds
Flavio
No problems to report in Amsterdam.
I'm biking through the whole city to get to work, no disconnects using TuneIn or Google Music. Provider is Vodafone, HSDPA+ all along the way.
Its Android issue
Think when iPhone, Windows phones have not had this issue, wat else other than Android. I have tried 3 different handsets. 3 different network - 3, O2 and Vodaphone. All has same problem. Android is the only thing common. I have been scouring the internet and posted everwhere possible since Dec 2010 from when I became Android user. There is no solution. Everone seems busy making their own Android versions and apps. Result there is no basic data and voice stability on Android. Have been relying on my decade old treo to receive n make important calls. Wonder where this is going. My heart n soul seems to sway to the iPhone lately. Atleast wat they give works well.
Its Android issue
BTW those config settings are useless too. I have even used the code to get into hidden menu and change config but no use. It's the same issue. From H to 3g and from G to E I gsm.
Sorry for the question, but whats the problem with switching? I have the same thing but is not a problem for me.
Sent from my GT-I9100 using XDA App
Nobody should get worried about that switching, THIS IS NORMAL!
H/H+ is an high speed 3G protocol.
Basically:
1. 3G means DL 384 Kbps tops. The modem is under 3G signal most of the time. Whenever something on your phone starts checking/d-loading it communicates at THE BEGINNING under 3G protocol. Also, long ping time> 210 ms.
2. HSDPA max 14 Mbps/HSDPA+ can go as high as 42 Mbps ( topped only by cell tower). If there's need for large packet data or shorter ping time, IT AUTOMATICALLY SWITCHES TO H/H+(IF AVAIL). Hsdpa consumes more power and it's a communication protocol. When connected under H/H+ error correction bits are transmitted along data stream. It's like switching your home wifi on b/g/n. ...or like the automatic gearbox going to overdrive.
If you see a lot of this switching it means there's a lot of downloading/uploading going on.
I have it switching too between 3g and h on o2 and its making the internet so unstable you cannot do anything at all. This is certain not normal as the switch happens every second and continues to do so until phone is off
Mine is also switching to 3G once connection is idle for about 3 seconds. So far no problem and it uses less power than my SGS1 for browsing since my SGS1 doesn't switch to 3G when idle.
Mine is no problem between this signal switching, check your area or check your country maybe too much communication devices there so that's why it is distorted. Just use the common carrier with plenty of cell sites for a good signal of your phone.
What do i need to dial to fix it to 3g only from 2g?
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
EDIT: So I really need help troubleshooting the issue. I'll logcat, dump, or whatever necessary. I've been in many cities/areas and this problem persists: if I haven't used data or the phone hasn't been backgrounding traffic, it'll take anywhere from 5 to 30 seconds before a connection is made when I try to access an internet-related function on my phone (even though 3G/H is displayed in the status bar). Out of shear frustration (this has been happening since I got the phone, under stock ROMs and now under AOKP), I tried messing with *#*#info#*#*. I changed WCDMA-preferred to WCDMA-only -- no improvement. Oddly, I also tried GSM-only. Well, great improvement! Even though I only have E, there is absolutely no latency in waiting for a connection -- so pages and other data end up loading faster on Edge than 3G !
I have absolutely no idea why my phone takes forever to make a connection. Under 3G, I see only but a few upstream network activity blips (even under full bars) for as much as 30 seconds, before there is any downstream activity (and when it comes, it comes). Can anyone help???
P.S.: I'm going to try using a friend's SIM later for comparison.
joebobjoe said:
Ever since I've transferred to AT&T I've had laggy data issues. I finally rooted/flashed to AOKP, and while trying to address the issues of no APNs appearing or saving and no signal status in the status bar, I've come to find both AT&T and T-Mobile as Available Networks under some network setting. Am I chasing ghosts here, or is there something actually up?
Click to expand...
Click to collapse
Because they both share the 1900MHz band I believe.
Red5 said:
Because they both share the 1900MHz band I believe.
Click to expand...
Click to collapse
I'd like to know if it shows up for anyone else?
joebobjoe said:
I'd like to know if it shows up for anyone else?
Click to expand...
Click to collapse
On AOKP it does for me too. Just ignore it.
Red5 said:
On AOKP it does for me too. Just ignore it.
Click to expand...
Click to collapse
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
joebobjoe said:
An aside: does your phone stay on 3G and switch to H only under moderate network traffic?
Click to expand...
Click to collapse
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Red5 said:
The phone displays 3G because thats what it is... then when data is being processed, it shows H because its using the "what AT&T calls 4G but its really HSPA" side of the network. For just standby time with no data, its going to show 3G because HSDPA is traffic, not standby.
Click to expand...
Click to collapse
Well that's strange. I'm used to phones displaying what network-level they are capable of. So why would it not just display H for HSPA+ when HSPA+ service is available, instead of only displaying under traffic.
I'm going to go ahead an edit this thread to help troubleshoot what I think to be the main issue.
After some trials I see that the network indicator switches back and forth between 3G and H a few tines before making the connection and transmitting data. Hmmm...
Basically, "4G" will eat your battery alive so the phone idles at 3G and jumps to H+ only when you use data. If you were on a "stock" ATT rom it would always read H+, but this is technically false since when its idle the phone sits in 3G. CM9 and AOKP accurately display it which is why you see the switch.
Sent from my SGH-I777 using Tapatalk
I have a HTC Amaze for a phone and the Galaxy S2 is my media player. Sometimes, when I don't feel like carrying around two devices, I put my T-Mobile SIM in the galaxy and use it as my phone. I must say, Edge is not as slow as I remember it being. Maybe speed is contingent on network traffic. If thats the case, instead of using crowded "faux G" networks, I may defer to Edge to save battery life and get good dl/ul rates.
My phone does the same thing. I noticed it sometime ago. When idle 3g. Internet I get H+. This is with both Shostock2 and Phone Bricker. I was curious to know too but just blew it off because it really doesnt make any difference to me as long as Im getting decent speeds. Im not even with ATT anymore. Went with Straight Talk. Which uses ATT towers. Cant beat the price!!
They don't have the correct apns, but that symbol problem is because the phone doesn't use hspa+ passively, only actively. It causes some lag when downloading, but it is faster fit large data. But your problem is due to a supposed imei range with bad modems. Rehash stick, fix the triangle, and return it.
Sent from my GT-I777 using xda premium
Today I'm having issues with 3g connectivity on my Lumia. The phone just doesn't connect no matter what. I tried restarting it, pulling the SIM but no luck. At first I thought: my bad for cutting the SIM card myself, maybe after some time it got messed up. When I came home I grabbed my gf's 710 and it was behaving the same way (her SIM card is brand new). Coincidence? I don't think so. A friend of mine with the same carrier (H3G) just told me he had no issues whatsoever connecting using 3g connectivity, and he has a Nokia N97. This is starting to piss me off...anybody else having connectivity issues today? It must be something Microsoft/Nokia related. God I'm about to throw this thing off the window.
3g connectivity
I had the same issue the day i bought it..had to reset the phone for 3g to work again and today i face the same issue again!
Abhinavad3r said:
I had the same issue the day i bought it..had to reset the phone for 3g to work again and today i face the same issue again!
Click to expand...
Click to collapse
My God I hope this is not the case, that would be annoying as hell...this is just too weird, why would this happen on two phones at the same time? Geez this is worse than on Android...
Hoping the same..Even im waiting for a workaround to make 3g work on my phone.
Ok, I just woke up and tried again, it works now Microsoft/Nokia have to do something about this tho, this is not acceptable...
Doesnt work for yet..still unablle to figure out why whatsapp is running fine but no other 3g activity happening. Please let me know if u had to do something for 3g to work.
Abhinavad3r said:
Doesnt work for yet..still unablle to figure out why whatsapp is running fine but no other 3g activity happening. Please let me know if u had to do something for 3g to work.
Click to expand...
Click to collapse
Nothing special really, I simply let it charge overnight, picked it up in the morning and it was working. Yesterday I tried everything: plugged it to the pc, switched flight mode on and off, tuned it off for a few minutes but no luck. The last option would have been draining the battery completely then plug it to the pc to turn it back on, but that wasn't necessary. Really weird...i still need to check if my gf's 710 is working now.
Seriously, this is not good. I noticed it since yesterday again. I had it when I first got my Lumia. I have weird issues such as being able to stream music non-stop over 3G, yet being unable to make or receive calls. What I do to make it work? I switch to airplane mode and back.
I got both Lumia and MicroSIM for free; didn't have these issues for weeks. I got the newest firmware (12072) using cab sender, might be any constellation? Typed on my Lumia btw
Apparently my gf's phone is working as well now, gotta love these random bugs...
Happened the same here, suddenly I got no signal at all, tried everything, didn't want to format the phone so I just waited and some hours later connection was back, but 2g only, next day all was fine with 3g also workin
Sent from my Lumia 800 using XDA Windows Phone 7 App
All issues are suddenly gone for me. Wtf
I've been having this exact problem for a couple of days now, i already called vodafone but they cant help me... WTF is happening?? no signal
same thing happened to my mate.. have you installed the latest update.. his issues went away after install??
luminated said:
same thing happened to my mate.. have you installed the latest update.. his issues went away after install??
Click to expand...
Click to collapse
I was already running the latest firmware when I faced this issue, it's not a matter of that I guess...
Sent from my Lumia 800 using XDA Windows Phone 7 App
same here, does anyone have a solution? im a bout to trade this piece of S%$& for a iphone ...
ragdoll20 said:
same here, does anyone have a solution? im a bout to trade this piece of S%$& for a iphone ...
Click to expand...
Click to collapse
How long has it been going on like that? Mine started working again after about a day...
6 days now, really getting pissed off. I think its just a faulty model. I'm gonna try to factory reset. Anybody have any other ideas?
6 days is a pretty damn long while...do a factory reset and if the issue is still there you should definitely get it checked. I had no idea this thread would have gethered all of these people, this is something that Nokia should be really looking into...
So i called vodafone and they told me that when i took my new 2 year contract (and got the phone) i also got a new sort of contract that slowed down my internet.. while this makes sense it also doesnt because the speeds they were talking about should still have been fast enough.. But since i also only had 500mb i upgraded and the problem is now gone. everythings really fast again.
One question though: When i pick highest network setting i can only choose 3g.. but with my current contract plan i should get "H". anyone have any info on that?
vnvman said:
6 days is a pretty damn long while...do a factory reset and if the issue is still there you should definitely get it checked. I had no idea this thread would have gethered all of these people, this is something that Nokia should be really looking into...
Click to expand...
Click to collapse
ragdoll20 said:
So i called vodafone and they told me that when i took my new 2 year contract (and got the phone) i also got a new sort of contract that slowed down my internet.. while this makes sense it also doesnt because the speeds they were talking about should still have been fast enough.. But since i also only had 500mb i upgraded and the problem is now gone. everythings really fast again.
One question though: When i pick highest network setting i can only choose 3g.. but with my current contract plan i should get "H". anyone have any info on that?
Click to expand...
Click to collapse
Ok let me explain what is going on. In Holland (Im dutch also) we have "H" as the symbol for an ACTIVE 3G connection (meaning downloading/uploading data). Where "3G" means an inactive (or not consuming data) 3G connection, this is not worse than H, its the same.
On the US version you will see 3G when not downloading and 3G+ when downloading (which is the same as our H). Whatever letter there is does not matter as long its not a G you have your max speed.
Now also notice that there are a lot of areas where providers can not peovide the maximum speed (crowded/low signal/etc). Make sure you check your speed with full bars and dont be paranoid with data tests. If the speed is reasonable and IE9 can load a decent page, than its ok. If it wont load a page than your 3G does not work.
If your 3G does not work (what was the case for some of you) than set the APN settings manually to your peovider (or use the Nokia Network Setup app), goto Settings --> Cellular --> Edit APN.
Now 3G will work.
Again dont be bothered about whatever Icon it shows, H, 3G or 3G+ its all good (or 4G). As long as there is no G or E you will have the highest connection your phone can receive. This does not guarantee your provider can deliver you what you pay for (probably you get much lower speeds) and they might also cap your speed if you surpass your datalimit (as does TMobile NL with "unlimited internet").
Good luck
I'm confirmed that my hometowm support the 21M hspa+ network,but why my gs3 can't lock the hspa+ network.When I open the data,H+ just showed at a very short time,and then it turns to H.
And I moddified the build.prop hsxpa=2,and flash the modem.but it just can't lock:crying:who can help me. thanks
I'm pretty sure that phones will only go to H+ if they actually need it. Hence you'll find that if you start requesting data, it will switch over to H+ again, and then revert to basic H when it's done. Probably not an issue.
anthropolyte said:
I'm pretty sure that phones will only go to H+ if they actually need it. Hence you'll find that if you start requesting data, it will switch over to H+ again, and then revert to basic H when it's done. Probably not an issue.
Click to expand...
Click to collapse
thanks,I know what you said,but I want to ask is that even it starts requesting data,it just stay at H,not H+.It just show at a very short time ,then it turns to H and alaways to be H.
In which case it's a problem with either your network provider or your phone. I'd suspect your provider primarily; give them a call and see if they can help.
anthropolyte said:
In which case it's a problem with either your network provider or your phone. I'd suspect your provider primarily; give them a call and see if they can help.
Click to expand...
Click to collapse
thanks,but gs2 can lockI'll call them tommorow
anthropolyte said:
In which case it's a problem with either your network provider or your phone. I'd suspect your provider primarily; give them a call and see if they can help.
Click to expand...
Click to collapse
and I have tried my white one and the blue one,it all can't,may be I should connect the network engineer
To expand to what anthropolyte said, the GS3 has a Fast Dormancy mode, where it'll connect to H+ network when is truly needed (heavy surfing/streaming, etc), and when the phone is mainly idle or doing light/periodical syncing, it'll switch back down to H or even 3G to conserve battery. As far as I know, Fast Dormancy must be supported by your carrier (which it does in your case) and must have a compatible phone to toggle between different network mode (GSM/HSPDA/UMTS, etc) to increase battery life.
lude219 said:
To expand to what anthropolyte said, the GS3 has a Fast Dormancy mode, where it'll connect to H+ network when is truly needed (heavy surfing/streaming, etc), and when the phone is mainly idle or doing light/periodical syncing, it'll switch back down to H or even 3G to conserve battery. As far as I know, Fast Dormancy must be supported by your carrier (which it does in your case) and must have a compatible phone to toggle between different network mode (GSM/HSPDA/UMTS, etc) to increase battery life.
Click to expand...
Click to collapse
but I have tried a lot of network things to do,such as online video,downloading sth,and etc.I saw there is nothing can even use the hspa+ network.I'll connect the network engineer and I think this is their problem.btw thanks a lot,and I'm a chinese user
mine alternates between 3g and H+ too. It bumps it up to H+ when I start using apps. The slight lag before it kicks in is not a bad trade off for better battery life.
anthropolyte said:
In which case it's a problem with either your network provider or your phone. I'd suspect your provider primarily; give them a call and see if they can help.
Click to expand...
Click to collapse
I called them,they told me nothing about how to deal with it or they didn't want to amdit this problem,and they told me to ask samsung for help.....
when I was in their business hall,I tested a i9100 and my 9300 white and blue,when i9100 requests data,9100 change to H+,but all of my 9300 can't change to H+,just stay at H,my god.....:crying:
HTCHD2ireland said:
mine alternates between 3g and H+ too. It bumps it up to H+ when I start using apps. The slight lag before it kicks in is not a bad trade off for better battery life.
Click to expand...
Click to collapse
Same here. 3G <---> H <---> H+ but when I start using apps like Youtube, H+ kicks in and everything is ok...
Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!
vivftp said:
Good day all!
I've been experiencing some issues since I got my C6806 3 weeks ago. I live in Toronto and my provider is Rogers. The phone itself is unlocked and is just running the stock software which is 4.2.2, build # 14.1.B.2.257
Ever since I got the phone I've had a periodic issue where the phone signal strength will just completely die out to 0 bars, then it'll come back to full bars about 30 seconds later. It happens whether I'm home or out on the road. It happens if I'm using LTE bands or 3G or HSPA. It also happens whether I've got wifi on or off.
Any troubleshooting steps you could suggest?
Thanks in advance!
Click to expand...
Click to collapse
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..
hamdogg said:
has it always happened?
Have you got stamina mode on? Turn stamina mode off and see if it stops..
Click to expand...
Click to collapse
It seems to happen on a frequent basis. At least a couple of times a day when I happen to be paying attention to my phone.
I've never actually used stamina mode, and it's always been off.
How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk
LordManhattan said:
How's LTE and HSPA where you are? If the signal is poor it'll switch over to the next thing on ladder. If you have a poor LTE signal it'll jump down to HSPA, and if you have a poor signal on that one it'll jump down to EDGE. It's the same dance if you walk into an area where there is good LTE coverage. It jump up from EDGE or HSPA to LTE, and iin all cases when it switches, you'll notice a couple of seconds where it connects to the new frequency (by having zero signal). That's why I disable LTE when I know I'm going to be in an area with poor LTE signal for a long period of time.
Not saying that this is your problem, but try only using EDGE for a couple of hours and see if it happens again.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?
:good:
vivftp said:
LTE and HSPA coverage by Rogers in Toronto is great overall. I don't really use the LTE APN because it seems to suck up battery life immensely. I just keep it in the normal APN that seems to switch randomly between HSPA and 3G. The issue can occur if I'm just sitting still in a spot. I'm using it, and all of a sudden the signal just cuts out for about 30 seconds and comes back. Both before and after the incident I am usually at full bars.
I'm unsure of what EDGE is. The only things I control are the APNs I obtained from Rogers - one is just the standard one that gives me 3G and HSPA, and the other is LTE.
Dunno what else I can really do. I doubt it's my provider so it's gotta be the phone. Any other real troubleshooting steps to try, or should I just get this to Sony?
Click to expand...
Click to collapse
EDGE is 2G. so turn off LTE and HSPA+ and see if it does it.
I don't have the LTE equipped phone so I'm not sure if these hardware functions will switch on and off randomly.
It sounds like your hardware is switching between 4g and 3g. problem is that both wont work simultaneously, so you would get this drop off. solution is that build prop edit i gave you.
But then you'd have 4g on all the time. so if you don't want that then turn it off manually.
Try these.
Edit your build.prop file.
(do you know how to do this??)
and insert these.
___________
ro.ril.hsxpa=3
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=20
ro.ril.hsupa.category=7
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
______________
that will stop hardware switching between 2g/3g/4g
as well as make it faster.
Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.
LordManhattan said:
Settings->More...->Mobile Networks->Network Mode->GSM Only
You'll still have mobile data, but it will be SLOW. I think the top speed is around 400KB/sec, but you'll only use this to check if your signal is more stable without 3G/4G.
Tip: If you want to save battery and you aren't the type that uses a lot of mobile data, use EDGE (the thing i'm currently writing about). 4G uses a lot of juice.
Click to expand...
Click to collapse
Thanks. Just made the change and will keep an eye on it over the next day or two.
Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.
vivftp said:
Just gotta say holy crap this Edge thing is SO slow. Even just loading icons on Google Plus or Youtube searches takes forever. A mobile speed test is showing about 133 kbps...
Damn... gotta come up with a better solution that doesn't require having slow as shyte data access
I'm trying WCDMA only to see how this might work. At least the speeds are more tolerable there.
Click to expand...
Click to collapse
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk
LordManhattan said:
Yeah, but keep using it for now. You're only checking if the signal drops while your on it, so I'm not saying that you should keep using it. It's only for a couple of hours. You can do it!
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.
vivftp said:
*sigh* I'll try
lol
EDIT. Nevermind the part below. I just kept trying more SMS apps until I settled upon GO SMS and it seems to finally be able to load photos. Damned weird the default one wouldn't do it
On another note, can anyone explain why the built in Messaging app has issues both sending and recieving photos? Plus there're a few instances where it says I've got a message, but I've viewed them all. I've even tried downloading a few other messaging apps from the Play store, and they can't seem to view or send photos either. Damned weird if you ask me.
Click to expand...
Click to collapse
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk
LordManhattan said:
I'm not using the stock messaging app. I'm using Hangouts as my main SMS app, but I didn't have any issues with it when I used it. The Android 4.3 update is released now, so you can update to it through PC Companion? Note that this will remove root and stuff like if you're rooted. If not, go ahead.
Sent from my C6833 using Tapatalk
Click to expand...
Click to collapse
Sorry to bump an old thread, but I just want to say that I'm having the exact same issue. I thought it might have occurred after I installed a custom room but I'm now back on stock and still experiencing 4 bars immediately dropping to no service and then going back to 3 or 4 bars before slowly dropping back to zero. I figured it could be LTE, so I experimented with all settings under mobile networks to no avail. I try the same Sim in my note 2 in the same location and I have no issues. I believe this is an issue with the antenna or a general hardware fault. My phone is the c6806, originally on Bell but being used on Telus. I have already contacted Sony but they are giving me the runaround
Anyone know how the warranty is handled in Canada? Anyone else have this problem?
Signal issues
Sorry I'm restarting this thread one more time.. But anyone figure out a fix? I'm having the same problem on a brand new phone... I had the same phone before I lost it. Got it again but these signal dropping issues now . Never had these on my previous cc6806