I'm looking for some ideas on cases for the sgs2, just ordered mine yesterday and should be here sometime next week so I'm wanting to shop around for a decent case that gives great protection and not much bulk. Right now on my captivate I run an otterbox commuter case that I really love, bit not entirely sure on the commuter design for the sgs2. So any feed back on the different cases that everyone likes would be much appreciated.
Swyped from my SGH-I897 using XDA Premium App
I wanted very, very little bulk since I normally don't even use a case. Ended up with this "semi rigid" case from Incipio.
http://www.myincipio.com/Samsung-Ga...-II-ATandT-NGP-Semi-Rigid-Soft-Shell-Case.asp
Looks pretty nice. Technically it's similar to a silicone case I guess, but it's so rigid that it's like a hard shell. 50/50
loving my otter box commuter (for the international). Sucks I may need to find a new one..have to order a new extended battery quick for sxsw...
SGP Neo Hybrid EX
I've tried a LOT of different cases, more than I'd like to admit. This is the one you want - light weight, protects well, has the best screen protector included, if you need one (I don't use it, but I don't put my phone in my pocket with keys). It's also very durable - you won't need another case after this one.
http://www.amazon.com/gp/product/B005O50ON4
The one thing that you have to do is to make a hole in it, which isn't too difficult. Instructions are in this thread.
http://forum.xda-developers.com/showthread.php?t=1303949
The Acclude said:
loving my otter box commuter (for the international). Sucks I may need to find a new one..have to order a new extended battery quick for sxsw...
Click to expand...
Click to collapse
Same on the commuter, not sure why people need a new battery I get 15-20 hours with heavy use and a 3-4 hour screen time. I use Entropy's Daily and setCPU to underclock when screen is locked.. On a low use day I can go 24 hours+
I love the commuter for i777. Great case, adds very little bulk. Does add some weight but it's not bad at all. Already saved from a few drops haha. Everything is easily accessible too. I love it.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Gives me some insight on some cases
my only real concern for the otterbox was how the hard shell doesn't cover the corners of the phone with the hard shell part of it, I love the commuter case i got on my cappy but theres been a few times that i dropped it and it landed on one of those corners. zhow thick is the silicon on the corners on the SGS2 commuter?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
from this picture of the cases doesnt look to protected on the corners of it
Koizuma said:
Gives me some insight on some cases
my only real concern for the otterbox was how the hard shell doesn't cover the corners of the phone with the hard shell part of it, I love the commuter case i got on my cappy but theres been a few times that i dropped it and it landed on one of those corners. zhow thick is the silicon on the corners on the SGS2 commuter?
from this picture of the cases doesnt look to protected on the corners of it
Click to expand...
Click to collapse
It's pretty thick and it feels incredibly solid, I have dropped it many times without issues..
Same here. My commuter has performed very well.
Sent from my SAMSUNG-SGH-I777 using xda premium
The corners are pretty thick. They're flush with the plastic part on mine. And the silicon protrudes past the screen so it shouldn't ever land on the screen.
Sent from my SAMSUNG-SGH-I777 using Tapatalk
I have an incipio ngp (power button too hard to press), a ringke slim, and a matte smoke from diztronic. The smoke is my favorite and has cutouts for everything including the power button.
Not loving the Otterbox
So, I've had the Otterbox Commuter for at least a month and there are a few things that are not great about it (to the point that I'm beginning to look for a new case):
It gets very "linty" when in your pocket (such that I remove the case when I travel on business)
The rubber is very soft and pliable; to the point of pulling loose when removing the phone from my pocket
There is no rubber on the back, so it slides when on a desk or dashboard
I'm sure these points are just me being picky
TreborRis said:
So, I've had the Otterbox Commuter for at least a month and there are a few things that are not great about it (to the point that I'm beginning to look for a new case):
It gets very "linty" when in your pocket (such that I remove the case when I travel on business)
The rubber is very soft and pliable; to the point of pulling loose when removing the phone from my pocket
There is no rubber on the back, so it slides when on a desk or dashboard
I'm sure these points are just me being picky
Click to expand...
Click to collapse
The lint is pretty annoying I agree, I like the case a lot but it gets to be ridiculous sometimes. I already have a case in mind if I were to get another
Sent from my SGH-I777 using XDA App
I love my Rearth case. Follows the contours of the phone well, low profile, everything's accessible, and slides into my pocket easily.
thanks for the input guys, i did a bit of research and after playing around with the case that came with the phone and its material was like the incipio ngp but had a hard plastic backing with a little stand thing that snaps in and out. Iended up ordering a incipio ngp in black.
Normally i would of went for the otterbox, but on my captivate the rubber shell was stretching out and i didnt have it all that long.
I'm using the ballistic case. Its nice and thin I never liked the otter box when I had my iphone so this is perfect
I Using a TPU case and I love the material its made from. Very thin and sturdy!
Sent from my SGH-I777 using Tapatalk
SGP
After numerous hours of reading the forums and reviews on-line, I just ordered the SGP Neo Hybrid EX Series (Satin Silver) from Amazon. It looks like a good case that provides some protection but keeps the slim feel of the phone, the battery cover remains exposed for ease of access and it comes with a decent screen protector from what I've read. I know I'll have to modify the top of the case in order to create a hole for the noise-canceling mic since the case was made for the international version. Hopefully the hot nail/needle trick works.
I'm using the casemate with the plastic shell and rubber insert. I wish the plastic shell also covered the top and bottom, but it doesn't. This leaves the rubber insert to bend freely and sometimes rub against clothing and such. Just a minor inconvenience.
afk47 said:
I'm using the casemate with the plastic shell and rubber insert. I wish the plastic shell also covered the top and bottom, but it doesn't. This leaves the rubber insert to bend freely and sometimes rub against clothing and such. Just a minor inconvenience.
Click to expand...
Click to collapse
I have the same case which is the case mate pop case. So far its been the best that I have tried. I've had it since I got my phone in October and the only thing I don't like is how it is starting to stretch a bit near the volume rocker and power button areas. It has the right amount of protection and isn't too big.
Related
Paid 22 shipped on ebay. It consists of a silicon case with a plastic shell that clamps over and covers the back.
*Pictures where I get home at 5 PM*
The fit is nice. The plastic shell clamps on tight enough that the silicone is all held very tightly in place. No wiggling around like standard silicone cases. The cutouts are all in the right locations for my ATT model. The buttons work well and seem fairly sturdy. Have to see how they hold up over time. Have not and do not plan to purposefully drop my phone but it seems as if the protection would be decent. It has thick rubber bumpers at all four corners. There is also a lip all the way around the face side that would protect the screen from hitting a flat surface. The only downside is it does increase the weight of the phone, some of its stock impact resistance is from its very light weight. My "opinion" is that the phone would be protected from impact but be subjected to higher Gs. Probably a net positive since in stock form landing on a corner would be bad.
As far as aesthetics and feel: The phone is quite a bit larger. I would say it roughly doubles the phones thickness and probably twice as heavy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had that case, (bought it at AT&T when I got the phone) in the end it was too thick, I kept taking it off because it wouldn't fit in my pockets comfortably. In the end, I went with the Case-Mate Pop. Similar protection, yet doesn't have the bumpers. In my opinion, the bumpers made the case way too big.
oic0 said:
Paid 22 shipped on ebay. It consists of a silicon case with a plastic shell that clamps over and covers the back.
*Pictures where I get home at 5 PM*
The fit is nice. The plastic shell clamps on tight enough that the silicone is all held very tightly in place. No wiggling around like standard silicone cases. The cutouts are all in the right locations for my ATT model. The buttons work well and seem fairly sturdy. Have to see how they hold up over time. Have not and do not plan to purposefully drop my phone but it seems as if the protection would be decent. It has thick rubber bumpers at all four corners. There is also a lip all the way around the face side that would protect the screen from hitting a flat surface. The only downside is it does increase the weight of the phone, some of its stock impact resistance is from its very light weight. My "opinion" is that the phone would be protected from impact but be subjected to higher Gs. Probably a net positive since in stock form landing on a corner would be bad.
As far as aesthetics and feel: The phone is quite a bit larger. I would say it roughly doubles the phones thickness and probably twice as heavy.
Click to expand...
Click to collapse
I just got my Ballistic SG for the SGS2 yesterday (Black/Blue)... good price ($20.20 shipped eBay... and now I see it for $18.99 shipped). You're either going to love this case or hate it, depending on your phone use/ protection objectives. Pros: fit is exceptional, covered buttons actually have a better feel than bare.. very responsive, easy to press. The soft inner shell fits tight once the outer hard shell is put on... so edges are nicely raised over the screen (and camera) with no annoying flappy play (like some TPU cases). If your primary objective is protection, this is the case for you. With the slightly oversized bumper corners, seems like you could bounce this phone off the concert and it would rebound back up without incident. Also, the noise-cancellation mic (top of phone next to jack) is not covered as the case has a perfect cutout for mic and jack. Cons: as OP states, it does add size and weight. Size to me is actually a bonus as I used to have an Infuse and this GS2 seemed small in my hand... now with case, size it perfect. Weight addition is noticeable; but I suspect over a few days use, it will become a non-issue.
Added pics
Love this case but..... Great protection, looks good, no covered holes, buttons easy to push. The thing that is driving me bonkers isn't the additional size this case packs on, it's the type of rubber used for the wrap. It's a 'sticky' rubber and pulls my pocket out with it on all my pants. Wish it were a more smooth, slicker rubber that would slide out of my pants better (Thats what she said, right?)
I have had it since day one, love it, a few good drops, the kids.....phone still looks like it is brand new, and the case has a life time warranty. I'm happy
Sent from my SAMSUNG-SGH-I777 using XDA App
I have the black/blue one. I just love it. It fits awesome, no flimsy corners or so.
My case of choice for my past 2 devices. Dropped the phone a few times and the bumpers bounced it back up. Still looking good as new. Does add some extra weight but it to me it makes the phone feel much better in my hands.
i like this case..but........rather get a otterbox for 5 bucks more
Picked it up the att store, returned it no less than 20 minutes. They Guy gave some some crazy eyes doing it. Picked up the case mate pop black case. Overall happy so far, gonna use this until I decide what to do. May get the commuter still. If the SG did not have those stupid bumpers I would have kept it.
Sent from my SAMSUNG-SGH-I777 using xda premium
fantomsingh said:
i like this case..but........rather get a otterbox for 5 bucks more
Click to expand...
Click to collapse
why?
10char
I actually bought the commuter case on Amazon for 23 bucks free shipping. The commuter covers more of the front screen than the pop case mate. I paid 38 Buck for this case at att so cheaper pricing is better. Otterbox will also send replacement silicon wraps if you complain about looseness or case seating problems. Different strokes for different folks I always say. No screen protector though, gorilla glass has never scratched on me.
Sent from my SAMSUNG-SGH-I777 using xda premium
Just wanted to give everyone a heads up. This case is awesome. I first wanted one when I got my Skullcandy case for my iPod touch and have been waiting for one built for an Android phone since. I like the case because it doesnt fall apart like other hard cases when its dropped. It slides together with the small black bottom piece and stays together. I found it pretty cheap on eBay and would highly recommend it. Matches the phone colors perfect with the deep red.
http://www.bodyglovemobile.com/product/htc-rezound-icon-case-red-flat-back-no-clip,339,19.htm
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice! Thanks for the heads up. How difficult is the case to get off incase you need to do a battery pull?
just ordered one in red. i was stuck between the commuter case and this icon case. for 8 bucks shipped. why not?! thanks
Pretty easy. It fits snug because of the felt lining inside the case but it's easier than one of those hard jelly cases
Cool, thanks!
@quikfinger00 is this the auction you bought from? http://www.ebay.com/itm/Body-Glove-HTC-Rezound-Icon-Case-Red-Flat-Back-Free-Shipping-9248201-/120840910311?pt=PDA_Accessories&hash=item1c22adf5e7#ht_918wt_1141
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Yup! Surely is ill let you guys know how it is when I receive it in the mail
Sent from my HTC Rezound
thanks 06stang and quikfinger00. I just bought one off ebay as well. I also have the commuter so I'll let you guys know what I think about the differences once it comes in!
Hey fellas. My case came in yesterday! this case surpassed my expectations. The red color is more of a dark metallic color and actually looks pretty beastly. All my prior phones (blackberries, voyager, incredible, DROID x, thunderbolt, gnex have had black cases but I really have to say that the color on this case is the shnit. I love the soft rubber feel and like the nice lip around the screen. Thin enough to keep the phone thin but thick enough to keep the phone safe in case of drops to the face. The interior has a quality feel (soft velour) to it and the phones fits snugly in the case. The case is also easy to connect together and remove for easy battery swaps. I have a otterbox commuter case coming in as well but I think I'll be keeping this one on more often except for when I need added protection or a more professional look for business meetings, etc, etc. I'll post pics tomorrow and will post back about my quick thoughts for the commuter case..
Sent from my HTC Rezound
Hey guys, so I've been using the body glove case for a couple days now. I definitely like the slimmer form factor compared to the commuter.
Pros: Definitely slimmer then the commuter.
It fits and covers the phone nicely so you see the whole screen (the commuter covers about half the htc logo).
Quick to get off in case you need to pull the battery.
Appears to be pretty sturdy and has a really snug fit.
Has a little bit of a less slippery back since its very lightly textured.
Has openings for the mics and what not where the commuter covers some of them
Colors and look is sweet.
Cons:
It doesnt have any internal padding on the sides so I dont know how well it would protect the phone from a hard drop if it landed anywhere besides on its back.
The back is still kind of slippery, but a little less then the commuter feels imo.
So far I like it and will probably only use the commuter at times if I know im going to be doing something that its more prone to getting dropped liked going out to the bars.
Hope this helps anybody thats been kindof iffy on whether or not to buy
PaulQ602 said:
+1. This case is awesome. I've had it for a month. Last I checked, Amazon also had it for a decent price. (Not as cheap as eBay though)
...Sent from my Tab
Click to expand...
Click to collapse
Any paint chipping off? Considering the gray/black one.
Theres a tiny bit of paint chipping where the two pieces meet. It also seems like theres a bit of metal underneath that paint. Maybe its just chrome plastic. This case looks to be of much better quality then previous cases made by body glove
Sent from my HTC Rezound
Had the case since the beginning of January and it's looking fantastic. No drops but lots of sliding around on tables and banging around a car shop.
I bit on this case because of this thread, just got it in.
it is light years beyond the oem htc plastic case from verizon with the red back/htc logo...
this case is the bees knees for me so far... love it.
I have this case also...
Along with a Seidio Active case...
The Body Glove does fit very snug on the ReZound...
Question I have is, has anyone had an issue with the case scratching the gloss edges of the phone?
I had this issue with my Dinc and a Seidio case.
Lego
ya, i've had the body glove case put some small scratches on the 'chrome edge' of the device... nothing i can't forget about, but it's definitely noticeable.
Just dropped it for the first time while walking the dog. Ouch...
Pretty much killed the top edge of the case. Bummer
Sent from my Transformer Prime TF201
I've had mine for a few months now, It's still in descent shape, had a few falls. It fits great, and looks good. I use it in combo w/ the zagg shield.
It did scratch the chrome around the edge of the phone, but nothing to terrible.
overall a great case.
I just purchased this. I've been looking for a decent case. I did like the Body Glove when I had it on my Original Droid, although it was a poor design because of the Droid's slide-out keyboard, but I still liked the feel of it. Looking forward to this. I should get it by the end of this week coming up.
I really like this case. Definitely better than the hard rubber one from Verizon.
Any one have it?
Sent from my HTC6435LVW using xda app-developers app
Mine came in the mail today. I ordered their lifestyle case (the slim one) on eBay and I have to say I am really satisfied with it. Chose this over the SG or their other one because those seem too bulky. Truly doesn't add much bulk to the phone as it still feels pretty slim and the raised, interchangeable bumpers on the corners are a great idea in theory. Kinda wish they came with red bumpers rather than orange, but the others are good. Miss the rubberized texture on the back of the DNA a little bit. Also, pressing the power button is a lot easier now; I think that's what I'm most pleased about. Also, the volume buttons are as easily pressed even though they are raised on the case. Before when I would reach to lock the phone with my index finger, I would accidentally hit the volume rocker. Haven't had that problem since. Again, very happy with it. Anyone his wants a slim case with a bit more quality over that 10 dollar tpu ones should definitely consider the ballistic LS!
Sent from my DNA using xda app-developers app
Just bought the Ballistic Shell Gel Case
I just bought the Ballistic Shell Gel Case on eBay for $20. I can't give the link coz it's my first post. I looked at the Diztronic case on Amazon, but at $20, it seemed that the Ballistic SG Case might be a better value. I guess I'll see when it arrives.
I just received the Ballistic LS Smooth case. I previously received the Diztronic case.
The Ballistic Life Style case is made of a grey TPU, which lacks the soft touch feel of the Diztronic case. Perhaps it's the fact that the Diztronic case is almost completely smooth, and the Ballistic case has a textured feel to it. I'd have to guess that the Ballistic case would be less easily dropped, because of the textured back.
I also like the slight curves around the edges, on the back of the Ballistic case, as compared to the completely smooth back of the Diztronic case. The Ballistic case feels more narrow in the hand, to me, then the Diztronic. Not sure if that's accurate or not, but it does feel that way.
The Ballistic LS case comes with four different colored, interchangable corner bumpers, black, orange, teal and grey. I replaced the orange bumpers that came installed in the case, with the Teal bumpers. Not too gaudy, but it gives the case a little bit of style.Installing the bumpers is a little fidgety... you need to make sure you put them in right side up, and then you need to keep pressing on them, from the inside of the case, until the nub pops out and lays flat! I guess it's something most people won't be doing very often, but it is a little bit of a hassle.
Buttons... power button is covered with a raised button, and I find it MUCH easier to turn the DNA on and off, with the Ballistic case on. Volume buttons are also raised, and seem to work very well. The integrated power and volume buttons are much more pronounced, and easier to find by touch, then on the Diztronic case, but I didn't have any issues with the buttons on the Diztronic case, either.
Cut-outs for speaker, USB port, mic etc. are all there, and seem positions fine. The cut-out for the speaker seems to be positions a little bit low, or it's over cut, so that you do see not only the speaker but also just above the speaker when looking at the opening on the back, but this is the same with the Diztronic case.
Overall, it's a very nice case. Honestly, I'm waiting for the Seidio cases to come out, so I purchased both of these simply to tide me over and protect the DNA until next month, when (I hope) Seidio releases their case. I've owned a couple of Seidio cases and really like them!
Feel free to ask any questions... Photos were taken with my son's iPhone 5.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
crikeycrapper said:
I just bought the Ballistic Shell Gel Case on eBay for $20. I can't give the link coz it's my first post. I looked at the Diztronic case on Amazon, but at $20, it seemed that the Ballistic SG Case might be a better value. I guess I'll see when it arrives.
Click to expand...
Click to collapse
Received the Ballistic SG Case yesterday and so far, it's been pretty good. It was relatively easy to install, and it does seem to provide good protection to the device. It did peel the corner of my screen protector, but I was able to fix that and properly tuck in the corner of the protector under the edge of the case. To me, it does not add too much girth to the DNA. The SG case does cover up the rear LED indicator light. I'm not certain if I should pursue modification to this, I probably won't. The backside of the SG case is probably not as slippery as the Ballistic Life Style case, and it seems to offer more in the way of grip. I'm quite pleased with the Ballistic SG case for the Droid DNA.
I received the Seidio Suface case with holster this morning and have put it through enough torture to come up with some initial impressions. The case fits the phone tightly which feels nice and secure, and the cutouts on the sides are all placed perfectly. The case has a soft-touch coating that feels really nice, but can make the phone somewhat slippery. I am cursed with oily skin and that shows up pretty easily on the case.
Here's what I'm liking:
- Overall fit and cutout placement are spot on. The cutout for the headphones leaves enough room for somewhat over sized cables. The cutout for the S Pen does not make the S Pen more difficult to remove.
- Kickstand works well. It is held in place by a magnet, but the magnet is not strong enough to cause interference with the S Pen.
- The case also does not interfere with NFC
- The holser is well made, and it has fabric to protect the screen of the phone when it is holstered. (velvet maybe?)
Here's what I am not liking:
- The case absorbs the oil from my hands and looks greasy after a few minutes use. (This of course can be wiped off)
- The holster is not reversible like I was hoping it was. The phone can only be inserted with the face covered by the holster.
Other than that, there isn't a whole lot to say. It is a decent case that looks like it will do its job fairly well. Here are some pictures:
agent4678 said:
I received the Seidio Suface case with holster this morning and have put it through enough torture to come up with some initial impressions. The case fits the phone tightly which feels nice and secure, and the cutouts on the sides are all placed perfectly. The case has a soft-touch coating that feels really nice, but can make the phone somewhat slippery. I am cursed with oily skin and that shows up pretty easily on the case.
Click to expand...
Click to collapse
I had a Seidio holster, way back, on my G1. Loved that case. I am waiting for the Seidio Active w/ Holster.
Does the holster have the lower lip on the clip to keep it from sliding off the belt, like the old G1 holster?
Breach said:
I had a Seidio holster, way back, on my G1. Loved that case. I am waiting for the Seidio Active w/ Holster.
Does the holster have the lower lip on the clip to keep it from sliding off the belt, like the old G1 holster?
Click to expand...
Click to collapse
Here is a better picture of the clip. Hope this helps.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
agent4678 said:
Here is a better picture of the clip. Hope this helps.
Click to expand...
Click to collapse
Yes. Thank you. That lip at the bottom of the clip helps keep the holster from slipping off your belt or lip of your pocket.
Thanks
agent4678 said:
Here is a better picture of the clip. Hope this helps.
Click to expand...
Click to collapse
I had this case for the Note 2. I was able to recommend it to a friend. Very good case. Especially if you're an active user. The holster rotates and the spring is very strong. Survived 1 or 2 drops on concrete. Easy to take off to pull/replace battery or SD/SIM card. So where's a purchase link?
Nihonno said:
I had this case for the Note 2. I was able to recommend it to a friend. Very good case. Especially if you're an active user. The holster rotates and the spring is very strong. Survived 1 or 2 drops on concrete. Easy to take off to pull/replace battery or SD/SIM card. So where's a purchase link?
Click to expand...
Click to collapse
Looks great. I wish they would hurry up and release the Seidio Active.
agent4678 said:
I received the Seidio Suface case with holster this morning and have put it through enough torture to come up with some initial impressions. The case fits the phone tightly which feels nice and secure, and the cutouts on the sides are all placed perfectly. The case has a soft-touch coating that feels really nice, but can make the phone somewhat slippery. I am cursed with oily skin and that shows up pretty easily on the case.
Here's what I'm liking:
- Overall fit and cutout placement are spot on. The cutout for the headphones leaves enough room for somewhat over sized cables. The cutout for the S Pen does not make the S Pen more difficult to remove.
- Kickstand works well. It is held in place by a magnet, but the magnet is not strong enough to cause interference with the S Pen.
- The case also does not interfere with NFC
- The holser is well made, and it has fabric to protect the screen of the phone when it is holstered. (velvet maybe?)
Here's what I am not liking:
- The case absorbs the oil from my hands and looks greasy after a few minutes use. (This of course can be wiped off)
- The holster is not reversible like I was hoping it was. The phone can only be inserted with the face covered by the holster.
Other than that, there isn't a whole lot to say. It is a decent case that looks like it will do its job fairly well. Here are some pictures:
Click to expand...
Click to collapse
Nice!!! Mine is on its way! have one on my og evo4g and its never failed me!
I have the Platinum version of this case which I don't know why it's called platinum because it is made by Seidio in the first place. Just like the Platinum batteries. I think it's a best buy exclusive which is where I purchased mine from.
Sent from my SM-N900P using XDA Premium 4 mobile app
this case slide in and out of pocket with no problem or is their some gripping? also is this case going to provide "armor" against small drops...... i'm considering rocking this phone with no case considering i have insurance on the phone... but a kickstand would be nice along with good protection... want as slim as possible.. no extra bulk.. obviously i mean as little as possible.. is the seido the only thing that looks like decent quality that has a kick stand? been staring down some spigens too... i know, no kickstand... but curious if it offers better protection..... the bounce looks like the slickest on the spigen side but not sure if its worth its weight.. all though it has great reviews on amazon
loopers said:
this case slide in and out of pocket with no problem or is their some gripping? also is this case going to provide "armor" against small drops...... i'm considering rocking this phone with no case considering i have insurance on the phone... but a kickstand would be nice along with good protection... want as slim as possible.. no extra bulk.. obviously i mean as little as possible.. is the seido the only thing that looks like decent quality that has a kick stand? been staring down some spigens too... i know, no kickstand... but curious if it offers better protection..... the bounce looks like the slickest on the spigen side but not sure if its worth its weight.. all though it has great reviews on amazon
Click to expand...
Click to collapse
I'm 6'2, 245lbs so maybe my pockets are a little bigger than some, but the case does not make it harder at all to take out of your pocket. I have not dropped the phone, but I can say that it is a hard case without any extra "cushion" that some of the 2-3 piece cases have. One thing that is nice is that when you lay the phone down on its face, it is not resting on the display. The kickstand definitely comes in handy with this phone because the screen is great for movies and games.
these are the cases I have managed to acquire so far
first photo left to right razer rugged, orzly leather folio case,orzly thin black ,orzly thin frosted, 2nd photo tudia case and razer thin. I'm currently using one of the 2 tudias I bought as they are similar to a spigen slim armour ruggedized TPU with a polycarb snap on back armour, anyone wanting full pics of the cases and how much each costs from where I'll be uploading pics of each case to my drive account so people can see before they buy there are lots of other cases mainly TPU appearing on Amazon, but for anyone who hasn't bought a case I'll try and get each one done over the next day or 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Phone using Tapatalk
how do you like the tudias? can you post more pics of those
I'm using the tudia with the silver back breaks up the all the black it looks good doesn't add much bulk , the finger print reader port has been thoughtfully scalloped away to make using it easier, the cylinder buttons work flawlessly, even with an orzly screen protector there's a good .5 mm clearance from it to the desk when face down and about 1mm all round when face down so the speakers are kept clear of the desk cut outs are precise good clearance on back to protect camera .
Sent from my Phone using Tapatalk
I just received my orzly case today and I gotta say I'm a little disappointed. I bought the "clear" one which I found out later was actually frosted, and unlike the pics show, it's pretty much nowhere clear clear.. You can see the Razer symbol, but that's about it. I'm definitely ordering the tudia clear shortly, my original idea was to wrap the phone with a dbrand then use the clear case as extra protection, but you ain't seeing anything through this thing lol
mikeandjaimie said:
I just received my orzly case today and I gotta say I'm a little disappointed. I bought the "clear" one which I found out later was actually frosted, and unlike the pics show, it's pretty much nowhere clear clear.. You can see the Razer symbol, but that's about it. I'm definitely ordering the tudia clear shortly, my original idea was to wrap the phone with a dbrand then use the clear case as extra protection, but you ain't seeing anything through this thing lol
Click to expand...
Click to collapse
have to say if the clear is the same quality as this rugged case it'll be a nice case for showcasing your phone with a skin without damaging the skin
Sent from my Phone using Tapatalk
I bought the Razer Rugged case however was fine the fact that it left a weird lip at the bottom of my phone just didn't feel natural to hold so gone back to using the phone without a case.
I know living life of the edge but don't have a habit of cosmetically damaging my phone's.
I didnt like the phone in a case either but couldnt live on the edge any longer, I dropped my last phone a day before the delivery of my razer.
Ive made a suede case for the razor with all the holes punch out, its pretty neet - ill update with pictures when im home.
Got the Orzly wallet case. Not bad in general. One major downside is the usb cutout. Razer uses squared profile on their connectors, but the case had rounded profile which prevented original accessories from being inserted all the way. Had to do some carving with scissors. Not the end of the world, but could be better
Thank you
nexy33 said:
I'm using the tudia with the silver back breaks up the all the black it looks good doesn't add much bulk , the finger print reader port has been thoughtfully scalloped away to make using it easier, the cylinder buttons work flawlessly, even with an orzly screen protector there's a good .5 mm clearance from it to the desk when face down and about 1mm all round when face down so the speakers are kept clear of the desk cut outs are precise good clearance on back to protect camera .
View attachment 4378524View attachment 4378525View attachment 4378526View attachment 4378527View attachment 4378528
Sent from my Phone using Tapatalk
Click to expand...
Click to collapse
HI there without you showing us this case I would have not known it existed thank you so much
AC
spigen now has a case ive have only been able to find it on amazon but there is customer images for it so its real and ive ordered one so i should be getting it in the next few days
https://www.amazon.com/gp/product/B078KJQH5V/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
corybrubaker said:
spigen now has a case ive have only been able to find it on amazon but there is customer images for it so its real and ive ordered one so i should be getting it in the next few days
https://www.amazon.com/gp/product/B078KJQH5V/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Just got my Spigen case it's the best case I own thus far and I own the Razer official case, orzly case, and the tudia case. Pick this up you won't be disappointed.
I picked up the Spigen rugged armor and it lifts the Razer screen protector
The Tudia doesn't lift a screen protector, but you have to get it centered perfectly. I've tried them all, the razer cases were the biggest POS's... Their rugged case was a joke and if you take them off without paying attention, you almost snap it in half because of their stupid design of having no side walls in the center area.
Been happy with the Tudia, still want something more like an otterbox defender. But I think I'm going to just 3d print something stupid awesome and thick.
I have this Orzly case in orange.
Fits perfect. Charging hole is big enough and the edge keeps the screen off the table if you put it screen down (which I never do).
Camera is also protected (if put on a flat surface).
Adds grip, so you won't let the phone slip out of your hand.
https://www.amazon.com/TUDIA-Slim-F...9&sr=1-1-spons&keywords=razer+phone+case&th=1