Hi Guys, I have following issues and I already spent hours to fix it up but no luck, I am getting desperate so I am offering $50 to who will first help me to fix it.
I am running
Model Number : HTC Sensation XE with Beats Audio Z715e
Android: 2.3.4.
HTC sense 3.0
Software number 1.73.720.2
Kernel version 2.6.35.13-g2299e28, [email protected] 18-2#1, SMP PREEMPT Wed Sep 14 18:36:38 CST 2011
Baseband version 10.58.9035.00U_10.15.9035.02._2
Build Number 1.73.720.2 CL161971 release keys
Browser Number
: WebKit/533.1
I have the following issues
1} my main camera doesnt work (camcorder does) - it will take the photo and then aplication closes itself and it goes to the main screen and in gallery i can see black image
2)my WIFI doesnt work (it says Error)
I have to say that I tried to root my Sensation beforehand and I was succesful, but I could not S-OFF it then, even though I tried to flash it with custom rom and maybe different kernel.
please see the log bellow:
Starting recovery on Fri Jan 20 09:20:21 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (540 x 960)
ClockworkMod Recovery v5.0.2.0
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null)
1 /recovery emmc /dev/block/mmcblk0p21 (null)
2 /boot emmc /dev/block/mmcblk0p20 (null)
3 /cache ext4 /dev/block/mmcblk0p24 (null)
4 /data ext4 /dev/block/mmcblk0p23 (null)
5 /sd-ext ext4 /dev/block/mmcblk1p2 (null)
6 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1
7 /system ext4 /dev/block/mmcblk0p22 (null)
8 /misc emmc /dev/block/mmcblk0p31 (null)
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
ro.build.id=GINGERBREAD
ro.build.display.id=full_pyramid-eng 2.3.5 GINGERBREAD eng.koush.20110905.114148 test-keys
ro.build.version.incremental=eng.koush.20110905.114148
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Mon Sep 5 11:42:12 PDT 2011
ro.build.date.utc=1315248132
ro.build.type=eng
ro.build.user=koush
ro.build.host=Koushik-Lion.local
ro.build.tags=test-keys
ro.product.model=HTC Sensation
ro.product.brand=generic
ro.product.name=full_pyramid
ro.product.device=pyramid
ro.product.board=pyramid
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=hdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=msm8660
ro.build.product=pyramid
ro.build.description=full_pyramid-eng 2.3.5 GINGERBREAD eng.koush.20110905.114148 test-keys
ro.build.fingerprint=generic/full_pyramid/pyramid:2.3.5/GINGERBREAD/eng.koush.20110905.114148:eng/test-keys
ro.sf.lcd_density=240
debug.fb.rgb565=0
debug.composition.type=c2d
rild.libpath=/system/lib/libhtc_ril.so
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
ro.gsm.2nd_data_retry_config=max_retries=3, 2000, 2000, 2000
ro.ril.enable.dtm=0
ro.ril.gprsclass=12
ro.ril.hsdpa.category=10
ro.ril.hsupa.category=6
ro.ril.hsxpa=3
ro.telephony.default_network=0
wifi.interface=eth0
wifi.supplicant_scan_interval=15
mobiledata.interfaces=gannet0,rmnet0,rmnet1,rmnet2
ro.opengles.version=131072
dalvik.vm.heapsize=32m
ro.ril.def.agps.mode=2
ro.ril.disable.power.collapse=1
ro.ril.enable.prl.recognition=1
ro.phone_storage=0
ro.emmc=1
ro.com.google.clientidbase=android-htc
ro.com.google.locationfeatures=1
ro.com.google.networklocation=1
ro.setupwizard.enable_bypass=1
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
media.a1026.nsForVoiceRec=0
media.a1026.enableA1026=0
htc.audio.alt.enable=0
htc.audio.hac.enable=1
keyguard.no_require_sim=true
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=SH1ATV804568
ro.bootmode=recovery
ro.baseband=10.14.9035.02_2
ro.carrier=HTC-India
ro.bootloader=1.18.0000
ro.hardware=pyramid
ro.revision=128
init.svc.choice_fn=stopped
init.svc.htcbatt=running
init.svc.adbd=running
ro.9kramdump=0
init.svc.recovery=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
Signature Check: Enabled
No files found.
No files found.
No files found.
-- Installing: /sdcard/Android_Revolution_HD-Sensation_5.0.1.zip
Finding update package...
I:Update location: /sdcard/Android_Revolution_HD-Sensation_5.0.1.zip
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:verify_file returned 1
E:signature verification failed
Installation aborted.
Signature Check: Disabled
-- Installing: /sdcard/Android_Revolution_HD-Sensation_5.0.1.zip
Finding update package...
I:Update location: /sdcard/Android_Revolution_HD-Sensation_5.0.1.zip
Opening update package...
minzip: Missed a central dir sig (at 0)
E:Can't open /sdcard/Android_Revolution_HD-Sensation_5.0.1.zip
(bad)
Installation aborted.
-- Installing: /sdcard/update.zip
Finding update package...
I:Update location: /sdcard/update.zip
Opening update package...
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
-- Installing: /sdcard/Android_Revolution_HD-Sensation_5.0.1_to_5.0.2_update.zip
Finding update package...
I:Update location: /sdcard/Android_Revolution_HD-Sensation_5.0.1_to_5.0.2_update.zip
Opening update package...
Installing update...
minzip: Extracted file "/system/app/VoiceSearch.apk"
===============================================
minzip: Extracted file "/system/app/YouTube.apk"
minzip: Extracted file "/system/build.prop"
symlink: failed to symlink /system/vendor/firmware/hdcp.keys to /factory/hdcp.keys: No such file or directory
| Android Revolution HD |
| by mike1986 |
| Be patient - 1st boot may take a while |
===============================================
>>> Mounting partitions
>>> Writing Data & System
>>> Unmounting partitions
about to run program [/sbin/busybox] with 4 args
Your help is much appreciated, I think I tried pretty much everything inclluding factory reset but no luck, I am very happy to pay the reward to who is going to solve this issue.
Thx
me again
so , I finally figure it out,,, I donwloaded Sensation xe stock rom and flash it, then everything seems to be fine.... I even S-OFF,, root my phone,,,life is good again..
The main thread of the update got messy and my guide was buried there so I'm opening a separate thread dedicated for help with the JB update (my first real contribution to XDA!).
Recommendations! prior to updating:
Delete and re-create the Voodoo root backup, just in case.
Unfreeze all frozen apps.
I'm still gathering all the info from the previous threads.
For those who rooted but are still locked, and having issues with updating, here's something that might help (continuing from: http://forum.xda-developers.com/showpost.php?p=32091002&postcount=111):
This seems to help for those who unlocked as well.
There were 3 files missing from /system/xbin that were required for the update to work.
It was confirmed by several users that the same files are applicable for all regional software variants.
Missing files:
http://www.mediafire.com/?cqccrt70xyrxjwz
The US update file (thanks Wipeout and Bait-Fish):
http://www.mediafire.com/download.php?zzg4pjccz0od9uo
CRC32: 5F044C22
MD5: C7F2DDC50DB3E96673977E41CEB643D6
SHA-1: 6966DE005C9E83A968025673B187884E375BB680
The WW update file (thanks for kikistans for uploading):
http://www.mediafire.com/download.php?kzr30e1vufbgee9
CRC32: 954022CD
MD5: C5D117D05399281BAB243B2420D721A8
SHA-1: B063E4ECA70985C66128D81ADF5B4C48383C64FE
The TW update file (thanks for lineager for uploading, and for beckzz for notifying me):
http://www.mediafire.com/download.php?b3jt0m8f7427ix3
or
http://d-h.st/kks (Original link by lineager)
CRC32: 7C828B02
MD5: 9259363BC2A20558ABB635515E979076
SHA-1: FC339F2FB67693D642BC5425E2B0940E152D7D17
The Guide:
Extract the above zip and put the three files on the main storage.
Copy the dlpkgfile to the main storage
Enter shell:
SU
mount -o remount,rw /system
cp /mnt/sdcard/dexdump /system/xbin/dexdump
cp /mnt/sdcard/ps3bttest /system/xbin/ps3bttest
cp /mnt/sdcard/rfcomm /system/xbin/rfcomm
chmod 777 /system/xbin/dexdump
chmod 777 /system/xbin/ps3bttest
chmod 777 /system/xbin/rfcomm
mount -o remount,ro /system
cp /mnt/sdcard/dlpkgfile /cache/dlpkgfile
echo '--update_package=/cache/dlpkgfile' >> /cache/recovery/command
Exit shell.
Shut down tablet.
Turn on while holding the "volume down" key.
When it vibrates, release the power key and keep holding the volume key.
Three lines appear, hit "Volume UP".
Update starts!
Update Finishes!
Additional Notes:
Some users reported success after replacing the build.prop with the one attached here (ripped from the US .28 blob).
Reported several times: It appears that temporarily unrooting through Voodo increases the chances for the update to complete successfully.
Should an attempt to update regularly fail, checking for the update again may result in a "no update for your device" message.
Clearing the app data for CMCLient and DMClient (Settings-> Apps -> All tab) and then checking for updates again is reported to force the update to re-download. Sometimes this has to be repeated for 2-3 times.
Here's a great guide by 1wayjonny for those who still face issues after trying the method listed here. It involves completely wiping the device, but it should also help for those facing the malformed /system/bin folder issues. http://forum.xda-developers.com/showpost.php?p=32113041&postcount=261
3/10/2012: Asus has released the full system images of Jelly Bean. If all else fails (try going through the FAQ first):
http://support.asus.com/Download.aspx?SLanguage=en&p=20&s=16&m=Eee Pad Transformer Prime TF201&os=32
FAQ
Root lost? Check these threads:
http://forum.xda-developers.com/showthread.php?t=1706588
http://forum.xda-developers.com/showthread.php?t=1886460
My update is still failing! How can I get additional help?
Open adb, and type in the following:
su
cat /cache/recovery/last_log
Post the output here.
When posting, it's best to wrap the log in CODE tags, for easier reading.
Common issues found through the update log:
script aborted: assert failed: file_getprop("/system/build.prop"
This is a case of mismatched build.prop file. Replace the build.prop, and try again the steps from cp /mnt/sdcard/dlpkgfile /cache/dlpkgfile onwards.
Command: "/sbin/recovery" | WITHOUT | "--update_package=/cache/dlpkgfile"
The update command was not written successfully. Try the following:
SU
cp /mnt/sdcard/dlpkgfile /cache/dlpkgfile
rm /cache/recovery
mkdir /cache/recovery
echo '--update_package=/cache/dlpkgfile' >> /cache/recovery/command
Now reboot and boot to recovery as described above.
script aborted: assert failed: apply_patch_check("/system/bin/***
Some busybox installers remove the original binaries from system/bin, causing the update to fail. The first to be checked is always gzip, but even after adding it manually the next binary (ip) is reported as missing.
Call to arms! I'm looking for some help in trying to resolve this issue. See this message: http://forum.xda-developers.com/showpost.php?p=32164458&postcount=104
Todo:
Complete FAQ
Looking for all other dlpkgfile for missing variants (TW etc.).
Thanks (in no particular order ):
Wipeout, Bait-fish, 1wayjonny, kikistans, beckzz turboman93, csetera and lineager for helping to form this thread.
*RESEVED*
Confirmation: This guide was written for the US variant. Does it work on non-US variants?
I can confirm it works, I'm from Malaysia and followed your guide, it work flawlessly. Thanks :good:
hsw1123 said:
Confirmation: This guide was written for the US variant. Does it work on non-US variants?
I can confirm it works, I'm from Malaysia and followed your guide, it work flawlessly. Thanks :good:
Click to expand...
Click to collapse
Can you please check which variant you have? Go to Settings -> About -> Scroll to Build Number, the variant is the two letter code after the build name (JRO03C.**_epad).
Trekest said:
Can you please check which variant you have? Go to Settings -> About -> Scroll to Build Number, the variant is the two letter code after the build name (JRO03C.**_epad).
Click to expand...
Click to collapse
My variant is WW.
Also, if anyone has modified or replaced any system files (ie keyboard.apk for multi-browser mod), or the build.prop (modified build prop for supposed performance improvements), they need to be replaced with the ORIGINAL files before you start the update. If not, it will throw an error and will tell you in the log what the particular issue was.
Cheers and good luck guys!
update failed. help needed
thanks this proceedure worked
Here's my log. Followed the guide and it still didn't work. Hopefully I didn't miss anything.
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
[email protected]:/ # cat /cache/recovery/last_log
Starting recovery on Fri Sep 28 13:53:26 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /boot emmc boot (null) 0
5 /recovery emmc recovery (null) 0
6 /staging ext3 /dev/block/mmcblk0p4 (null) 0
7 /btmac vfat /dev/block/mmcblk0p5 (null) 0
8 /data ext4 /dev/block/mmcblk0p8 (null) -32768
9 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
I:Got arguments from /cache/recovery/command
Command: "/sbin/recovery" "--update_package=/cache/dlpkgfile"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp,adb
ro.build.id=IML74K
ro.build.display.id=IML74K.US_epad-9.4.2.28-20120525
ro.build.version.incremental=US_epad-9.4.2.28-20120525
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri May 25 14:56:03 CST 2012
ro.build.date.utc=1337928963
ro.build.type=user
ro.build.user=
ro.build.host=Venus
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=US_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=EeePad
ro.build.description=US_epad-user 4.0.3 IML74K US_epad-9.4.2.28-20120525 release-keys
ro.build.fingerprint=asus/US_epad/EeePad:4.0.3/IML74K/US_epad-9.4.2.28-20120525:user/release-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
rild.libpath=/system/lib/libril-icera.so
rild.libargs=-e wwan0
persist.tegra.nvmmlite=1
debug.nfc.fw_download=false
debug.nfc.se=false
ro.config.notification_sound=NewMessage.ogg
persist.sys.ringermode=2
ro.config.bootsound=PowerOn.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V6.1.24
gps.version.driver=V6.9.20
keyguard.no_require_sim=true
ro.kernel.qemu=
bt.version.driver=V9.29
drm.service.enabled=1
windowsmgr.max_events_per_sec=200
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.0_r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.wifi.country=US
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=BCOKAS159787
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=wifi-only
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/dev/block/mmcblk0p8
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_flags=0x00000006
ro.crypto.state=unencrypted
ro.epad.model=TF201
persist.sys.NV_STEREOCTRL=0
persist.tegra.NV_FPSLIMIT=0
persist.sys.NV_FPSLIMIT=35
persist.sys.NV_POWERMODE=1
persist.sys.profiler_ms=0
persist.sys.NV_PROFVER=21
persist.sys.NV_STEREOSEP=20
persist.sys.NV_STEREOSEPCHG=0
persist.sys.fw.camera.status=1
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
persist.sys.timezone=Europe/London
persist.sys.time_synced=1
init.svc.recovery=running
init.svc.adbd=running
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
Verifying current system...
failed to stat "/system/app/DataBackup.apk": No such file or directory
file "/system/app/DataBackup.apk" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/app/DataBackup.apk", "9e0bcf47e81ef668cf2edfeb15c5b1e4e3d87c78", "c0381621db3421c713b1b89f0499aac50b912699")
assert failed: apply_patch_check("/system/app/DataBackup.apk", "9e0bcf47e81ef668cf2edfeb15c5b1e4e3d87c78", "c0381621db3421c713b1b89f0499aac50b912699")
E:Error in /cache/dlpkgfile
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
[email protected]:/ #
I have no idea what DataBackup.apk is.
Pls guys, for your own safety: don't post full S/N in your Logs!
did you unfreeze all your apps?
Revelation_Space said:
Here's my log. Followed the guide and it still didn't work. Hopefully I didn't miss anything.
(...)
I have no idea what DataBackup.apk is.
Click to expand...
Click to collapse
Doesnt work for me either...
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
# cat /cache/recovery/last_log
Starting recovery on Fri Sep 28 14:06:09 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /boot emmc boot (null) 0
5 /recovery emmc recovery (null) 0
6 /staging ext3 /dev/block/mmcblk0p4 (null) 0
7 /btmac vfat /dev/block/mmcblk0p5 (null) 0
8 /data ext4 /dev/block/mmcblk0p8 (null) -32768
9 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
I:Got arguments from /cache/recovery/command
Command: "/sbin/recovery" "--update_package=/cache/dlpkgfile.bin"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=IML74K
ro.build.display.id=IML74K.WW_epad-9.4.2.28-20120525
ro.build.version.incremental=WW_epad-9.4.2.28-20120525
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri May 25 15:42:24 CST 2012
ro.build.date.utc=1337931744
ro.build.type=user
ro.build.user=
ro.build.host=Venus
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=EeePad
ro.build.description=WW_epad-user 4.0.3 IML74K WW_epad-9.4.2.28-20120525 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
rild.libpath=/system/lib/libril-icera.so
rild.libargs=-e wwan0
persist.tegra.nvmmlite=1
debug.nfc.fw_download=false
debug.nfc.se=false
ro.config.notification_sound=NewMessage.ogg
persist.sys.ringermode=2
ro.config.bootsound=PowerOn.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V6.1.24
gps.version.driver=V6.9.20
keyguard.no_require_sim=true
ro.kernel.qemu=
bt.version.driver=V9.29
drm.service.enabled=1
windowsmgr.max_events_per_sec=200
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.0_r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.com.google.mcc_fallback=262
ro.wifi.country=GB
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=C2OKAS0*****
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=wifi-only
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/dev/block/mmcblk0p8
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_flags=0x00000006
ro.crypto.state=unencrypted
ro.epad.model=TF201
persist.sys.NV_STEREOCTRL=0
persist.tegra.NV_FPSLIMIT=0
persist.sys.NV_FPSLIMIT=35
persist.sys.NV_POWERMODE=1
persist.sys.profiler_ms=0
persist.sys.time_synced=1
persist.sys.NV_STEREOSEP=20
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_PROFVER=12
persist.sys.fw.camera.status=1
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
init.svc.recovery=running
init.svc.adbd=running
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile.bin
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
script aborted: assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.1.1/JRO03C/WW_epad-10.4.2.15-20120917:user/release-keys"
assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.1.1/JRO03C/WW_epad-10.4.2.15-20120917:user/release-keys"
E:Error in /cache/dlpkgfile.bin
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
#
troyperez said:
[email protected]:/ $ export PATH=/data/local/bin:$PATH
(...)
Click to expand...
Click to collapse
Revelation_Space said:
Here's my log. Followed the guide and it still didn't work. Hopefully I didn't miss anything.
(...)
I have no idea what DataBackup.apk is.
Click to expand...
Click to collapse
Ok, for both of you:
did you unfreeze all apps?
Have you any changes in the build.prop?
pls check your sku-version and if you got the right files...
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
Ok, just to confirm:
this guide works well for US and WW SKU, just checked it myself flashing back to .28 ww sku and then upgraded..works like a charm!
Grz
Are there any success stories of rooting JB after you lost it during the update? I lost mine last night at home updating and only now just saw the two methods posted here in this thread today at work. Will try one or both this evening but wanted to see if there are any success stories and which method works.
beckzz said:
Ok, for both of you:
did you unfreeze all apps?
Have you any changes in the build.prop?
pls cheack your sku-version and if you got the right files...
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
Ok, just to confirm:
this guide works well for US and WW SKU, just checked it myself flashing back to .28 ww sku and then upgraded..works like a charm!
Grz
Click to expand...
Click to collapse
I've never frozen any apps, just deactivated with the built-in function. Aslo I did a factory reset before attempting to update.
For some reason it says my build number is US_epad-9.4.2.28
It has always been ww before. How the heck did that happen?
EDIT, was using a wrong build.prop will try again with the WW one.
troyperez said:
Installing update...
Verifying current system...
failed to stat "/system/xbin/dexdump": No such file or directory
file "/system/xbin/dexdump" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/xbin/dexdump", "6bfff804d5c767ab058115d4a006e332902b54f7", "d06a91295f69e57356a7dd2c580c513692ebf541")
assert failed: apply_patch_check("/system/xbin/dexdump", "6bfff804d5c767ab058115d4a006e332902b54f7", "d06a91295f69e57356a7dd2c580c513692ebf541")
E:Error in /cache/dlpkgfile
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
I:timed out waiting for key input; rebooting.
[email protected]:/ #
Click to expand...
Click to collapse
did you copy the file dexdump to /system/xbin/? if so, did you chmod it? the update doesn't like the dexdump file either because it's not there or there's some other issue with it.
Cernunnoz said:
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile.bin
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
script aborted: assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys" ||
file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.1.1/JRO03C/WW_epad-10.4.2.15-20120917:user/release-keys"
assert failed: file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys" || file_getprop("/system/build.prop", "ro.build.fingerprint") == "asus/WW_epad/EeePad:4.1.1/JRO03C/WW_epad-10.4.2.15-20120917:user/release-keys"
E:Error in /cache/dlpkgfile.bin
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
#
Click to expand...
Click to collapse
did you install a modded build prop? the problem you're having is that your build prop is not matching up with the one it wants. i would recommend restoring a stock .28 build.prop (your original if you still have it) and that should fix this error.
edit: just saw your post above mine. looks like you already figured it out
Cernunnoz said:
I've never frozen any apps, just deactivated with the built-in function. Aslo I did a factory reset before attempting to update.
For some reason it says my build number is US_epad-9.4.2.28
It has always been ww before. How the heck did that happen?
EDIT, was using a wrong build.prop will try again with the WW one.
Click to expand...
Click to collapse
Ok, and try with activated apps too..
Sent from my GT-I9100 using xda app-developers app
beckzz said:
Ok, for both of you:
did you unfreeze all apps?
Have you any changes in the build.prop?
pls check your sku-version and if you got the right files...
---------- Post added at 04:24 PM ---------- Previous post was at 04:22 PM ----------
Ok, just to confirm:
this guide works well for US and WW SKU, just checked it myself flashing back to .28 ww sku and then upgraded..works like a charm!
Grz
Click to expand...
Click to collapse
thanks got it to work.
I can confirm your guide works for EU (WW) as well. I used the 3 missing files you provided, and the WW update file provided by kikistans. I guess the missing file are the same for US and EU.
Thanks!
More info for other people troubleshooting:
I'm in the Netherlands, with a rooted but otherwise stock TF201. I received the OTA update. It failed to install after reboot (red triangle). Then I followed Trekest's guide, and now I'm bathing in buttery goodness.
Still issues
So I got my old build.prop back in, but it still doesn't work.
----
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
# cat /cache/recovery/last_log
Starting recovery on Fri Sep 28 14:36:01 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /boot emmc boot (null) 0
5 /recovery emmc recovery (null) 0
6 /staging ext3 /dev/block/mmcblk0p4 (null) 0
7 /btmac vfat /dev/block/mmcblk0p5 (null) 0
8 /data ext4 /dev/block/mmcblk0p8 (null) -32768
9 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
I:Got arguments from /cache/recovery/command
Command: "/sbin/recovery" "--update_package=/cache/dlpkgfile.bin"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp
ro.build.id=IML74K
ro.build.display.id=IML74K.WW_epad-9.4.2.28-20120525
ro.build.version.incremental=WW_epad-9.4.2.28-20120525
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri May 25 15:42:24 CST 2012
ro.build.date.utc=1337931744
ro.build.type=user
ro.build.user=
ro.build.host=Venus
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=EeePad
ro.build.description=WW_epad-user 4.0.3 IML74K WW_epad-9.4.2.28-20120525 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
rild.libpath=/system/lib/libril-icera.so
rild.libargs=-e wwan0
persist.tegra.nvmmlite=1
debug.nfc.fw_download=false
debug.nfc.se=false
ro.config.notification_sound=NewMessage.ogg
persist.sys.ringermode=2
ro.config.bootsound=PowerOn.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V6.1.24
gps.version.driver=V6.9.20
keyguard.no_require_sim=true
ro.kernel.qemu=
bt.version.driver=V9.29
drm.service.enabled=1
windowsmgr.max_events_per_sec=200
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.0_r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.com.google.mcc_fallback=262
ro.wifi.country=GB
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=C2OKAS0***'*
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=wifi-only
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/dev/block/mmcblk0p8
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_flags=0x00000006
ro.crypto.state=unencrypted
ro.epad.model=TF201
persist.sys.NV_STEREOCTRL=0
persist.tegra.NV_FPSLIMIT=0
persist.sys.NV_FPSLIMIT=35
persist.sys.NV_POWERMODE=1
persist.sys.profiler_ms=0
persist.sys.time_synced=1
persist.sys.NV_STEREOSEP=20
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_PROFVER=12
persist.sys.fw.camera.status=1
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
init.svc.recovery=running
init.svc.adbd=running
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /cache/dlpkgfile.bin
Opening update package...
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1682 bytes; signature 1664 bytes from end
I:whole-file signature verified against key 0
I:verify_file returned 0
Installing update...
Verifying current system...
file "/system/lib/egl/libEGL_tegra.so" doesn't have any of expected sha1 sums; checking cache
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: assert failed: apply_patch_check("/system/lib/egl/libEGL_tegra.so", "0acfc35384696a0d39c6f188a9c905da305c8a48", "909f84e59f3e066150812b2f31cac23a450fcf8d")
assert failed: apply_patch_check("/system/lib/egl/libEGL_tegra.so", "0acfc35384696a0d39c6f188a9c905da305c8a48", "909f84e59f3e066150812b2f31cac23a450fcf8d")
E:Error in /cache/dlpkgfile.bin
(Status 7)
Installation aborted.
I:result_code: 410
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
#
Some additional info if it helps: I am running rooted stock. I used to have ATK Tweak and EZ Overclock, uninstalled them both before I reset to factory settings.
[email protected]:/ $ export PATH=/data/local/bin:$PATH
[email protected]:/ $ su
[email protected]:/ # cat /cache/recovery/last_log
Starting recovery on Fri Sep 28 15:44:35 2012
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (1280 x 800)
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /system ext4 /dev/block/mmcblk0p1 (null) 0
2 /cache ext4 /dev/block/mmcblk0p2 (null) 0
3 /misc emmc /dev/block/mmcblk0p3 (null) 0
4 /boot emmc boot (null) 0
5 /recovery emmc recovery (null) 0
6 /staging ext3 /dev/block/mmcblk0p4 (null) 0
7 /btmac vfat /dev/block/mmcblk0p5 (null) 0
8 /data ext4 /dev/block/mmcblk0p8 (null) -32768
9 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
Command: "/sbin/recovery"
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
persist.sys.usb.config=mtp,adb
ro.build.id=IML74K
ro.build.display.id=IML74K.WW_epad-9.4.2.28-20120525
ro.build.version.incremental=WW_epad-9.4.2.28-20120525
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Fri May 25 15:42:24 CST 2012
ro.build.date.utc=1337931744
ro.build.type=user
ro.build.user=
ro.build.host=Venus
ro.build.tags=release-keys
ro.product.model=EPAD
ro.product.brand=asus
ro.product.name=WW_epad
ro.product.device=EeePad
ro.product.board=EeePad
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=asus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=tegra
ro.build.product=EeePad
ro.build.description=WW_epad-user 4.0.3 IML74K WW_epad-9.4.2.28-20120525 release-keys
ro.build.fingerprint=asus/WW_epad/EeePad:4.0.3/IML74K/WW_epad-9.4.2.28-20120525:user/release-keys
ro.build.characteristics=tablet
ro.opengles.version=131072
wifi.interface=wlan0
rild.libpath=/system/lib/libril-icera.so
rild.libargs=-e wwan0
persist.tegra.nvmmlite=1
debug.nfc.fw_download=false
debug.nfc.se=false
ro.config.notification_sound=NewMessage.ogg
persist.sys.ringermode=2
ro.config.bootsound=PowerOn.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=48m
dalvik.vm.heapsize=256m
wifi.version.driver=V6.1.24
gps.version.driver=V6.9.20
keyguard.no_require_sim=true
ro.kernel.qemu=
bt.version.driver=V9.29
drm.service.enabled=1
windowsmgr.max_events_per_sec=200
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.0_r1
gsm.bodysargsm=32,26,29,29
ro.com.google.clientidbase=android-asus
ro.com.google.mcc_fallback=262
ro.wifi.country=GB
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=C3OKAS0****
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=wifi-only
ro.bootloader=unknown
ro.hardware=cardhu
ro.revision=0
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/dev/block/mmcblk0p8
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_flags=0x00000006
ro.crypto.state=unencrypted
ro.epad.model=TF201
persist.sys.NV_STEREOCTRL=0
persist.tegra.NV_FPSLIMIT=0
persist.sys.NV_FPSLIMIT=35
persist.sys.NV_POWERMODE=1
persist.sys.profiler_ms=0
persist.sys.time_synced=1
persist.sys.NV_STEREOSEP=20
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_PROFVER=21
persist.sys.fw.camera.status=1
persist.sys.language=en
persist.sys.country=GB
persist.sys.localevar=
persist.sys.timezone=Europe/London
persist.sys.NV_STEREOAPP=0
init.svc.recovery=running
init.svc.adbd=running
Finding update package...
I:Update location: /sdcard/ASUS_BUNDLE.zip
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument); trying /dev/block/mmcblk1
E:failed to mount /sdcard (Invalid argument)
E:Can't mount /sdcard/ASUS_BUNDLE.zip
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument); trying /dev/block/mmcblk1
E:failed to mount /sdcard (Invalid argument)
E:Can't mount SD card.
I:Enable RSA key verification.
Installing update...
Finding update package...
I:Update location: /sdcard/EP201_SDUPDATE.zip
W:failed to mount /dev/block/mmcblk1p1 (Invalid argument); trying /dev/block/mmcblk1
E:failed to mount /sdcard (Invalid argument)
E:Can't mount /sdcard/EP201_SDUPDATE.zip
SD Installation aborted.
Check and format /storage to vfat if needed...
Mount /btmac successfully
Done.
[email protected]:/ #
troyperez said:
thanks got it to work.
Click to expand...
Click to collapse
np, glad i could help.
just hit thanks if you like the support, credits to Trekest
First off all:
I have < 10 posts, hence I cannot create this thread in the appropriate sub-forum. If a moderator wants to move this thread, that would be nice.
Brief intro:
I am a N7000 owner looking to make the switch to the 6.3. The only thing that's holding me back at this point is that so far there has been no confirmation on a working CWM. I noticed that development is a little slow regarding CWM, so i thought i'd "build" a recovery.
1. This was built using http://builder.clockworkmod.com/
2. This is based on recovery.img and recovery.fstab from this post.
3. The md5 of the original recovery is 13e64f3947318cba830992224d781389. You can compare the one from the thread with the one from the buildserver (inputrecovery.img) to verify this.
4.The build can be found here: http://jenkins.cyanogenmod.com/job/recovery/31839/
5. recovery.tar.md5 can be found here.
6. It was created the following way:
[email protected]:/archive# tar -H ustar -c recovery.img > recovery.tar
[email protected]:/archive# md5sum -t recovery.tar >> recovery.tar
[email protected]:/archive# mv recovery.tar recovery.tar.md5
7. This was built as a non-touch recovery. Trying to eliminate any potential point of failure.
8. Feel free to test it, but as always i take no responsibility.
ponglenis said:
First off all:
I have < 10 posts, hence I cannot create this thread in the appropriate sub-forum. If a moderator wants to move this thread, that would be nice.
Brief intro:
I am a N7000 owner looking to make the switch to the 6.3. The only thing that's holding me back at this point is that so far there has been no confirmation on a working CWM. I noticed that development is a little slow regarding CWM, so i thought i'd "build" a recovery.
1. This was built using http://builder.clockworkmod.com/
2. This is based on recovery.img and recovery.fstab from this post.
3. The md5 of the original recovery is 13e64f3947318cba830992224d781389. You can compare the one from the thread with the one from the buildserver (inputrecovery.img) to verify this.
4.The build can be found here: http://jenkins.cyanogenmod.com/job/recovery/31839/
5. recovery.tar.md5 can be found here.
6. It was created the following way:
[email protected]:/archive# tar -H ustar -c recovery.img > recovery.tar
[email protected]:/archive# md5sum -t recovery.tar >> recovery.tar
[email protected]:/archive# mv recovery.tar recovery.tar.md5
7. This was built as a non-touch recovery. Trying to eliminate any potential point of failure.
8. Feel free to test it, but as always i take no responsibility.
Click to expand...
Click to collapse
I haven't tried this but I have done the same set of steps and it didn't work. I will let someone else report on this version.
Sent from my GT-I9205 using Tapatalk 2
Kangburra said:
I haven't tried this but I have done the same set of steps and it didn't work. I will let someone else report on this version.
Sent from my GT-I9205 using Tapatalk 2
Click to expand...
Click to collapse
Well, thats too bad. Sadly i do not know very much about building CWM. You do have the option to include a custom graphics.c file for custom frame buffers, but since we have no recovery sources for the 6.3 i would not know where to start.
I was able to build a recovery using https :// github.com/CyanogenMod/android_bootable_recovery/blob/jellybean/minui/graphics.c?source=cc this graphics.c. This is of course not device specific.
Maybe someone who has root and a terminal emulator can post the results of this command:
ls -la /dev/graphics/
Thanks, lets not give up on this just yet
One more thing that would be helpful if someone could post what (the faulty) CWM logs after starting.
Perhaps someone with a faulty CWM installed who has root and a terminal emulator can post the results of the following command:
cat /cache/recovery/last_log
Thanks!
ponglenis said:
Well, thats too bad. Sadly i do not know very much about building CWM. You do have the option to include a custom graphics.c file for custom frame buffers, but since we have no recovery sources for the 6.3 i would not know where to start.
I was able to build a recovery using https :// github.com/CyanogenMod/android_bootable_recovery/blob/jellybean/minui/graphics.c?source=cc this graphics.c. This is of course not device specific.
Maybe someone who has root and a terminal emulator can post the results of this command:
ls -la /dev/graphics/
Thanks, lets not give up on this just yet
Click to expand...
Click to collapse
Here
Code:
1|[email protected]:/ $ ls -la /dev/graphics/
crw-rw---- system graphics 29, 0 2013-01-03 20:11 fb0
crw-rw---- system graphics 29, 1 2013-01-03 20:11 fb1
crw-rw---- system graphics 29, 2 2013-01-03 20:11 fb2
lrwxrwxrwx root root 2013-01-03 20:11 hdmi -> /dev/graphics/fb1
One more thing that would be helpful if someone could post what (the faulty) CWM logs after starting.
Perhaps someone with a faulty CWM installed who has root and a terminal emulator can post the results of the following command:
cat /cache/recovery/last_log
Thanks!
Click to expand...
Click to collapse
Code:
127|[email protected]:/ # cat /cache/recovery/last_log
Starting recovery on Tue Jan 1 00:58:03 2013
[collecting table information]
recovery filesystem table
=========================
0 '/tmp' 'ramdisk' '(null)' '(null)' 0
1 '/boot' 'emmc' '/dev/block/platform/msm_sdcc.1/by-name/boot' '(null)' 0
2 '/system' 'ext4' '/dev/block/platform/msm_sdcc.1/by-name/system' '(null)' 0
3 '/data' 'ext4' '/dev/block/platform/msm_sdcc.1/by-name/userdata' '(null)' -16384
4 '/cache' 'ext4' '/dev/block/platform/msm_sdcc.1/by-name/cache' '(null)' 0
5 '/recovery' 'emmc' '/dev/block/platform/msm_sdcc.1/by-name/recovery' '(null)' 0
6 '/sdcard' 'vfat' '/dev/block/mmcblk1p1' '/dev/block/mmcblk1' 0
7 '/efs' 'ext4' '/dev/block/platform/msm_sdcc.1/by-name/efs' '(null)' 0
8 '/modem' 'emmc' '/dev/block/platform/msm_sdcc.1/by-name/modem' '(null)' 0
9 '/preload' 'ext4' '/dev/block/platform/msm_sdcc.1/by-name/hidden' '(null)' 0
[initialize init-recovery]
#mount /system
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
/system sucessfully mounted
#unmount /cache
/cache sucessfully unmounted
#exec -f /system/bin/e2fsck -v -y /dev/block/platform/msm_sdcc.1/by-name/cache
e2fsck 1.42.6 (21-Sep-2012)
/dev/block/platform/msm_sdcc.1/by-name/cache: clean, 14/12800 files, 9760/51200 blocks
#insmod -f -v /system/lib/modules/exfat_core.ko
/system/lib/modules/exfat_core.ko (76848) ''
initalized the '/system/lib/modules/exfat_core.ko' module
#insmod -f -v /system/lib/modules/exfat_fs.ko
/system/lib/modules/exfat_fs.ko (35764) ''
initalized the '/system/lib/modules/exfat_fs.ko' module
#lsmod
exfat_fs 18524 0 - Live 0xbf016000 (P)
exfat_core 62096 1 exfat_fs, Live 0xbf000000 (P)
#mount -f /cache
stat() of /dev/block/platform/msm_sdcc.1/by-name/cache succeeded on try 1
/cache sucessfully mounted
#cat -f --no-exist /cache/recovery/command > /cache/recovery/last_command
#ls /cache/recovery/
-rw-r--r-- root root 80 2013-05-16 14:34 command
-rw-r--r-- root root 32328230 2013-05-16 14:34 sec_csc.zip
-rw-r--r-- root root 80 2013-01-01 00:58 last_command
#mount /data
stat() of /dev/block/platform/msm_sdcc.1/by-name/userdata succeeded on try 1
failed to mount '/dev/block/platform/msm_sdcc.1/by-name/userdata' '/data'(ext4)(3076) -> Invalid argument
E :failed to mount /data (Invalid argument)
trace: __out_return: _do_mount :: can't mount '/data' (Invalid argument)
/system sucessfully unmounted
/cache sucessfully unmounted
running init-recovery time : 0.233s
[collecting command]
stat() of /dev/block/platform/msm_sdcc.1/by-name/cache succeeded on try 1
I:Got arguments from /cache/recovery/command
E :File Open error.
locale is [(null)]
[initialize ui and event]
initalized graphics for qualcomm.
pixel format -> GGL_PIXEL_FORMAT_RGBX_8888
return for qualcomm. double_buffering = 0
framebuffer: fd 4 (720 x 1280)
not turn off screen
installing_text: (1 x 1 @ 1896)
erasing_text: (1 x 1 @ 1599)
no_command_text: (1 x 1 @ 1599)
error_text: (1 x 1 @ 1599)
Command: "/sbin/recovery" "--update_package=CACHE:recovery/sec_csc.zip" "--carry_out=csc_factory" "--wipe_data"
previous_runs = 0
send_intent = (null)
update_package = CACHE:recovery/sec_csc.zip
att_fota_update = 0
tmo_fota_update = 0
wipe_data = 1, wipe_cache = 1,wipe_sdcard = 0,delete_data = 0,wipe_data_crypto = 0,wipe_carrier = 0,no_wipe_custom=0
wipe_hdd_secure = 0
show_ui_text = 0
update_factory_csc = 1, update_home_csc = 0, factory_fota = 0
carry_out = csc_factory
tima_kernal_recovery = 0
(replacing path "CACHE:recovery/sec_csc.zip" with "/cache/recovery/sec_csc.zip")
[property list]
ro.boot.hardware=qcom
ro.boot.debug_level=0x4f4c
ro.boot.cp_debug_level=0x55FF
ro.boot.emmc_checksum=3
ro.boot.bootloader=I9205XXUAMEA
ro.boot.nvdata_backup=0
ro.boot.boot_recovery=1
ro.boot.batt_check_recovery=1
ro.boot.emmc=true
ro.boot.serialno=06c760e6
ro.boot.baseband=msm
ro.serialno=06c760e6
ro.bootmode=unknown
ro.baseband=msm
ro.bootloader=I9205XXUAMEA
ro.debug_level=0x4f4c
ro.cp_debug_level=0x55FF
ro.emmc_checksum=3
ro.nvdata_backup=0
ro.boot_recovery=1
ro.emmc=true
ro.bootchg=unknown
ro.hardware=qcom
ro.revision=11
ro.factorytest=0
ro.secure=1
ro.allow.mock.location=0
ro.debuggable=0
ro.adb.secure=1
persist.sys.usb.config=mtp
ro.build.id=JDQ39
ro.build.display.id=JDQ39.I9205XXUAMEA
ro.build.version.incremental=I9205XXUAMEA
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Thu May 16 23:53:36 KST 2013
ro.build.date.utc=1368716016
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEP-130
ro.build.tags=release-keys
ro.product.model=GT-I9205
ro.product.brand=samsung
ro.product.name=meliusltexx
ro.product.device=meliuslte
ro.product.board=MSM8960
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm8960
ro.build.product=meliuslte
ro.build.description=meliusltexx-user 4.2.2 JDQ39 I9205XXUAMEA release-keys
ro.build.fingerprint=samsung/meliusltexx/meliuslte:4.2.2/JDQ39/I9205XXUAMEA:user/release-keys
ro.build.characteristics=phone
ro.build.PDA=I9205XXUAMEA
ro.build.hidden_ver=I9205XXUAMEA
ro.build.changelist=651213
ro.product_ship=true
ro.chipname=MSM8930AB
rild.libpath=/system/lib/libril-qc-qmi-1.so
rild.libargs=-d /dev/smd0
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
ril.subscription.types=NV,RUIM
DEVICE_PROVISIONED=1
debug.sf.hw=1
debug.egl.hw=1
debug.composition.type=c2d
debug.compbypass.enable=1
dalvik.vm.heapsize=256m
debug.enable.wl_log=1
persist.hwc.mdpcomp.enable=true
persist.cne.bat.range.low.med=30
persist.cne.bat.range.med.high=60
persist.cne.loc.policy.op=/system/etc/OperatorPolicy.xml
persist.cne.loc.policy.user=/system/etc/UserPolicy.xml
persist.cne.bwbased.rat.sel=false
persist.cne.snsr.based.rat.mgt=false
persist.cne.bat.based.rat.mgt=false
persist.cne.rat.acq.time.out=30000
persist.cne.rat.acq.retry.tout=0
persist.cne.feature=0
persist.sys.camera.connect=0
persist.sys.videomode=0
ro.hdmi.enable=true
ro.yas.enable=true
ro.yas_softiron.expressatt=true
ro.yas-selftest.enable=true
lpa.decode=true
lpa.use-stagefright=true
media.stagefright.enable-player=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-fma2dp=true
media.stagefright.enable-scan=true
mmp.enable.3g2=true
ro.use_data_netmgrd=true
persist.timed.enable=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
af.resampler.quality=255
mpq.audio.decode=true
ro.opengles.version=131072
ro.bluetooth.hfp.ver=1.6
ro.qualcomm.bt.hci_transport=smd
ro.bluetooth.request.master=true
ro.bluetooth.remote.autoconnect=true
persist.gps.qmienabled=true
ro.qualcomm.cabl=0
ro.lcd_min_brightness=20
ro.lcd_brightness=120
ro.ril.transmitpower=true
persist.fuse_sdcard=true
ro.hwui.text_cache_width=2048
ro.warmboot.capability=1
ro.sf.lcd_density=240
persist.radio.apm_sim_not_pwdn=1
persist.sys.storage_preload=1
persist.radio.add_power_save=1
net.streaming.rtsp.uaprof=http://wap.samsungmobile.com/uaprof/
net.change=net.bt.name
ro.vendor.extension_library=/system/lib/libqc-opt.so
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.sec.fle.encryption=true
ro.hdcp2.rx=tz
media.enable-commonsource=true
ro.secwvk=144
ro.config.ringtone=S_Over_the_horizon.ogg
ro.config.notification_sound=S_Whistle.ogg
ro.config.alarm_alert=Walk_in_the_forest.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
ro.error.receiver.default=com.samsung.receiver.error
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.com.google.gmsversion=4.2_r2
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.qc.sdk.izat.premium_enabled=0
persist.gps.qc_nlp_in_use=0
init.svc.ueventd=running
init.svc.recovery=running
stat() of /dev/block/platform/msm_sdcc.1/by-name/efs succeeded on try 1
[Installing package]
-- Installing package...
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
Finding update package...
I:Update location: /cache/recovery/sec_csc.zip
stat() of /dev/block/platform/msm_sdcc.1/by-name/efs succeeded on try 1
Opening update package...
I:read key e=3
I:read key e=3
I:2 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1796 bytes; signature 1778 bytes from end
signed len : 32326432
sha1 : 32326464
1ed1ab31 36cfac47 c1fa5ba e5bb793 c7ca1104
1e d1 ab 31 36 cf ac 47 0c 1f a5 ba 0e 5b b7 93 c7 ca 11 04
4e 00 4e 00 ef 18 00 00 1d 2a ed 01 80 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0f 6a 19 00
I:whole-file signature verified against key 1
I:verify_file returned 0
Installing update...
minzip: Extracted file "/system/CSCVersion.txt"
minzip: Extracted file "/system/SW_Configuration.xml"
minzip: Extracted file "/system/VODB/de_DE/checked"
minzip: Extracted file "/system/VODB/de_DE/de_DE-ak-cur.lite.res"
minzip: Extracted file "/system/VODB/de_DE/de_DE-lk-text.lite.res"
minzip: Extracted file "/system/VODB/de_DE/de_DE.lang"
minzip: Extracted file "/system/VODB/de_DE/files.txt"
minzip: Extracted file "/system/VODB/en_GB/checked"
minzip: Extracted file "/system/VODB/en_GB/en_GB-ak-cur.lite.res"
minzip: Extracted file "/system/VODB/en_GB/en_GB-lk-text.lite.res"
minzip: Extracted file "/system/VODB/en_GB/en_GB.lang"
minzip: Extracted file "/system/VODB/en_GB/files.txt"
minzip: Extracted file "/system/VODB/en_US/checked"
minzip: Extracted file "/system/VODB/en_US/en_US-ak-cur.lite.res"
minzip: Extracted file "/system/VODB/en_US/en_US-lk-text.lite.res"
minzip: Extracted file "/system/VODB/en_US/en_US.lang"
minzip: Extracted file "/system/VODB/en_US/files.txt"
minzip: Extracted file "/system/VODB/ko_KR/checked"
minzip: Extracted file "/system/VODB/ko_KR/files.txt"
minzip: Extracted file "/system/VODB/ko_KR/ko_KR.lang"
minzip: Extracted file "/system/VODB/ko_KR/ko_KR_johab-ak-cur.lite.res"
minzip: Extracted file "/system/VODB/ko_KR/ko_KR_johab-lk-text.lite.res"
minzip: Extracted file "/system/VODB/ko_KR/slang.res"
minzip: Extracted file "/system/VODB/lib/StylusWidget/libMyScriptEngine.so"
minzip: Extracted file "/system/VODB/lib/StylusWidget/libMyScriptHWR.so"
minzip: Extracted file "/system/VODB/lib/StylusWidget/libStylusCore.so"
minzip: Extracted file "/system/VODB/lib/ank-standard.res"
minzip: Extracted file "/system/VODB/lib/checked"
minzip: Extracted file "/system/VODB/lib/equation-ak.lite.res"
minzip: Extracted file "/system/VODB/lib/equation-grm-standard.res"
minzip: Extracted file "/system/VODB/lib/files.txt"
minzip: Extracted file "/system/VODB/lib/libMyScriptAnalyzer.so"
minzip: Extracted file "/system/VODB/lib/libMyScriptEngine.so"
minzip: Extracted file "/system/VODB/lib/libMyScriptEquation.so"
minzip: Extracted file "/system/VODB/lib/libMyScriptHWR.so"
minzip: Extracted file "/system/VODB/lib/libMyScriptInkSearch.so"
minzip: Extracted file "/system/VODB/lib/libMyScriptShape.so"
minzip: Extracted file "/system/VODB/lib/libStylusCore.so"
minzip: Extracted file "/system/VODB/lib/libvoim.so"
minzip: Extracted file "/system/VODB/lib/shk-analyzer.res"
minzip: Extracted file "/system/VODB/lib/shk-standard.res"
minzip: Extracted file "/system/VODB/mul/checked"
minzip: Extracted file "/system/VODB/mul/files.txt"
minzip: Extracted file "/system/VODB/mul/mul-lk-email.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-gesture.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-number.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-number_decimal.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-number_integer.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-number_signed_decimal.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-number_signed_integer.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-phone_number.res"
minzip: Extracted file "/system/VODB/mul/mul-lk-uri.res"
minzip: Extracted file "/system/VODB/mul/mul-sk-email.res"
minzip: Extracted file "/system/VODB/mul/mul-sk-uri.res"
minzip: Extracted file "/system/VODB/resources.txt"
minzip: Extracted file "/system/app/Books.apk"
minzip: Extracted file "/system/app/Videos.apk"
minzip: Extracted file "/system/csc/contents.db"
minzip: Extracted file "/system/csc/customer.xml"
minzip: Extracted file "/system/csc/default_workspace.xml"
minzip: Extracted file "/system/csc/easylauncher_default_workspace.xml"
minzip: Extracted file "/system/csc/language.xml"
minzip: Extracted file "/system/csc/others.xml"
minzip: Extracted file "/system/csc/sales_code.dat"
minzip: Extracted file "/system/etc/csc_apks_list_DBT.txt"
minzip: Extracted file "/system/etc/csc_ringtones_list_DBT.txt"
minzip: Extracted file "/system/etc/hidden_apks_list_DBT.txt"
minzip: Extracted file "/system/etc/lteon_netlist.xml"
minzip: Extracted file "/system/etc/plmn_delta.bin"
minzip: Extracted file "/system/sipdb/de_DE.zip"
minzip: Extracted file "/system/sipdb/en_GB.zip"
minzip: Extracted file "/system/sipdb/en_US.zip"
minzip: Extracted file "/system/sipdb/ko_KR.zip"
package_extract_dir: 1
script result was [t]
Successfully installed package.
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
stat() of /dev/block/platform/msm_sdcc.1/by-name/efs succeeded on try 1
read csc code = 'DBT'
just_reboot_after_update = 1
[installing media-csc]
running media-csc time : 0.000s
[Formatting data]
-- Wiping data...
Formatting /data...
Formatting /data...
Creating filesystem with parameters:
Size: 5322555392
Block size: 4096
Blocks per group: 32768
Inodes per group: 8128
Inode size: 256
Journal blocks: 20303
Label:
Blocks: 1299452
Block groups: 40
Reserved block group size: 319
Created filesystem with 11/325120 inodes and 43274/1299452 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
complted format with ext4
/dev/block/platform/msm_sdcc.1/by-name/userdata is the encryptable partition?(1)
running time format /data time : 12.793s
running total wipe-data time : 12.823s
[installing multi-csc]
#echo
#echo -- Appling Multi-CSC...
-- Appling Multi-CSC...
#mount /system
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
/system sucessfully mounted
#echo Applied the CSC-code : DBT
Applied the CSC-code : DBT
#cp -y -f -r -v /system/csc/common /
trace: __out_return: __scan_cp_dir :: cannot get src '/system/csc/common' (No such file or directory)
#unmount /system
/system sucessfully unmounted
#mount /system
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
/system sucessfully mounted
#cmp -r /system/csc/common /
trace: __out_return: __scan_cmp_dir :: Can't open dir '/system/csc/common' .. skip (No such file or directory)
#cp -y -f -r -v /system/csc/DBT/system /system
trace: __out_return: __scan_cp_dir :: cannot get src '/system/csc/DBT/system' (No such file or directory)
#rm -v /system/csc_contents
#ln -v -s /system/csc/DBT/csc_contents /system/csc_contents
create symbolic '/system/csc/DBT/csc_contents' -> '/system/csc_contents'
#unmount /system
/system sucessfully unmounted
#mount /system
stat() of /dev/block/platform/msm_sdcc.1/by-name/system succeeded on try 1
/system sucessfully mounted
#cmp -r /system/csc/DBT/system /system
trace: __out_return: __scan_cmp_dir :: Can't open dir '/system/csc/DBT/system' .. skip (No such file or directory)
#rm -v --limited-file-size=0 /system/app/*
#echo Successfully applied multi-CSC.
Successfully applied multi-CSC.
/system sucessfully unmounted
running multi-csc time : 0.337s
[updated the factory mode]
#precondition define /preload
#echo -- Copying media files --
-- Copying media files --
#mount /preload
stat() of /dev/block/platform/msm_sdcc.1/by-name/hidden succeeded on try 1
/preload sucessfully mounted
#mount /data
stat() of /dev/block/platform/msm_sdcc.1/by-name/userdata succeeded on try 1
/data sucessfully mounted
#mkdir media_rw media_rw 0770 /data/media
#cp -y -r -v -f --with-fmode=0664 --with-dmode=0775 --with-owner=media_rw.media_rw /preload/INTERNAL_SDCARD/ /data/media/
the directory '/data/media/Samsung'
src : drwxr-xr-x root root 2013-05-16 14:34 Samsung
dst : drwxrwxr-x media_rw media_rw 2013-01-01 00:58 Samsung
the directory '/data/media/Samsung/Music'
src : drwxr-xr-x root root 2013-05-16 14:34 Music
dst : drwxrwxr-x media_rw media_rw 2013-01-01 00:58 Music
/preload/INTERNAL_SDCARD/Samsung/Music/Over_the_horizon.mp3 -> /data/media/Samsung/Music/Over_the_horizon.mp3 (2702919 bytes)
transferred in writed time : 0.055s closed time : 0.241s progressed with 46.87M byte/sec
src : -rw-r--r-- root root 2702919 2013-05-16 14:34 Over_the_horizon.mp3
dst : -rw-rw-r-- media_rw media_rw 2702919 2013-01-01 00:58 Over_the_horizon.mp3
#unmount /data
/data sucessfully unmounted
#mount /data
stat() of /dev/block/platform/msm_sdcc.1/by-name/userdata succeeded on try 1
/data sucessfully mounted
#cmp -r /preload/INTERNAL_SDCARD/ /data/media/
compare '/preload/INTERNAL_SDCARD/Samsung/Music/Over_the_horizon.mp3' '/data/media/Samsung/Music/Over_the_horizon.mp3' -> ok
/preload sucessfully unmounted
/data sucessfully unmounted
running factory-out time : 0.520s
Formatting /cache...
Formatting /cache...
Creating filesystem with parameters:
Size: 209715200
Block size: 4096
Blocks per group: 32768
Inodes per group: 6400
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 51200
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/12800 inodes and 1865/51200 blocks
warning: wipe_block_device: Wipe via secure discard failed, used discard instead
complted format with ext4
/dev/block/platform/msm_sdcc.1/by-name/cache is the encryptable partition?(0)
[installing post-recovery]
#mount /cache
stat() of /dev/block/platform/msm_sdcc.1/by-name/cache succeeded on try 1
/cache sucessfully mounted
#mkdir system cache 0775 /cache/recovery
#cp -y -f -v /tmp/recovery_backup.txt /cache/recovery/last_recovery
trace: __out_return: __scan_cp_dir :: cannot get src '/tmp/recovery_backup.txt' (No such file or directory)
#mount /data
stat() of /dev/block/platform/msm_sdcc.1/by-name/userdata succeeded on try 1
/data sucessfully mounted
#mkdir system log 0775 /data/log
#cp -y -f -v /tmp/recovery_backup.txt /data/log/recovery_log.txt
trace: __out_return: __scan_cp_dir :: cannot get src '/tmp/recovery_backup.txt' (No such file or directory)
/cache sucessfully unmounted
/data sucessfully unmounted
running post-recovery time : 0.147s
void copy_log_file(char const*, char const*, int) :: create recovery log file '/cache/recovery/log'
stat() of /dev/block/platform/msm_sdcc.1/by-name/cache succeeded on try 1
void copy_log_file(char const*, char const*, int) :: create recovery log file '/cache/recovery/last_log'
[email protected]:/ #
I hope i can help
Greetz
Thanks! That is helpful. I'm currently at work, will check back in a couple of hours.
thanks, but didn't work for me!
Well, i analyzed what we have and come to the following conclusions:
1. @locuter thanks for posting that information! I'm not sure if the posted log is actually a CWM log though. This date put me off:
Code:
Starting recovery on Tue Jan 1 00:58:03 2013
Also, it logs out this command, which looks like an update script:
Code:
Command: "/sbin/recovery" "--update_package=CACHE:recovery/sec_csc.zip" "--carry_out=csc_factory" "--wipe_data"
previous_runs = 0
send_intent = (null)
update_package = CACHE:recovery/sec_csc.zip
att_fota_update = 0
tmo_fota_update = 0
wipe_data = 1, wipe_cache = 1,wipe_sdcard = 0,delete_data = 0,wipe_data_crypto = 0,wipe_carrier = 0,no_wipe_custom=0
wipe_hdd_secure = 0
show_ui_text = 0
update_factory_csc = 1, update_home_csc = 0, factory_fota = 0
carry_out = csc_factory
tima_kernal_recovery = 0
(replacing path "CACHE:recovery/sec_csc.zip" with "/cache/recovery/sec_csc.zip")
And later proceeds to install the update:
Code:
Installing update...
minzip: Extracted file "/system/CSCVersion.txt"
minzip: Extracted file "/system/SW_Configuration.xml"
minzip: Extracted file "/system/VODB/de_DE/checked"
minzip: Extracted file "/system/VODB/de_DE/de_DE-ak-cur.lite.res"
minzip: Extracted file "/system/VODB/de_DE/de_DE-lk-text.lite.res"
minzip: Extracted file "/system/VODB/de_DE/de_DE.lang"
minzip: Extracted file "/system/VODB/de_DE/files.txt"
minzip: Extracted file "/system/VODB/en_GB/checked"
...
So my guess is this file was written by the stock recovery.
CWM *should* also write this file as soon as the recovery starts, or am I mistaken? I pulled the log from my N7000:
Code:
[email protected]:/cms_android/1_i9205/cwm_recovery_last_log$ cat last_log.n7000 | grep -A 20 Starting
Starting recovery on Tue Jun 4 18:18:00 2013
(GMT)framebuffer: fd 4 (800 x 1280)
PhilZ Touch 4
CWM Base version: 6.0.3.1
I:Build version: 4.93.6 - n7000
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/mmcblk0p5 (null) 0
2 /recovery emmc /dev/block/mmcblk0p6 (null) 0
...
@locuter Did you flash CWM, enter the recovery, then cat the file? In any case, having the log file from the original recovery might still come in helpful, as it can give hints.
2. I looked through the last_log and tried to find anything that looks familiar to the graphics.c from the CM GitHub. The only thing referenced was this:
last_log:
Code:
[initialize ui and event]
initalized graphics for qualcomm.
pixel format -> GGL_PIXEL_FORMAT_RGBX_8888
return for qualcomm. double_buffering = 0
framebuffer: fd 4 (720 x 1280)
not turn off screen
In graphics.c, the value gets checked for when calling:
Code:
static int get_framebuffer(GGLSurface *fb)
Code:
else if (PIXEL_FORMAT == GGL_PIXEL_FORMAT_RGBX_8888) {
vi.red.offset = 24;
vi.red.length = 8;
vi.green.offset = 16;
vi.green.length = 8;
vi.blue.offset = 8;
vi.blue.length = 8;
vi.transp.offset = 0;
vi.transp.length = 8;
}
Well, that's all. I just wanted to do a little digging. Maybe someone who knows more about recoveries and/or how the framebuffer works (if it is even the problem) can look if the graphics.c from CM-Github can be modified and used for the 6.3.
One last thing:
If one of you guys do manage to pull a CWM recovery log, i'd be more than happy to check it out for clues.
hi
i have one china tablet pierre cardin pc704 cpu allwiner cortex a8,, a13 chip but after write cwm (custom recovery) phone not exit recovery so bootloping to cwm after reboot and soft brick i have read dump stock recovery,boot.img before bricked phone but cant wite in partion and cant find stock fw for unbrick this tablet...
now in cwm not find main partion for write stock recovery???
Code:
~ # cat /proc/partitions
cat /proc/partitions
major minor #blocks name
179 0 7778304 mmcblk0
179 1 7653320 mmcblk0p1
179 2 124983 mmcblk0p2
please any way for write stock recovery in dd if=/sdcard/recovery.img of=/dev/block/nandg?
this recovery log
Code:
Starting recovery on Thu Nov 7 00:28:09 2013
framebuffer: fd 4 (800 x 480)
ClockworkMod Recovery v6.0.2.7
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /boot emmc /dev/block/nandc (null) 0
2 /system ext4 /dev/block/nandd (null) 0
3 /data ext4 /dev/block/nande (null) 0
4 /misc emmc /dev/block/nandf (null) 0
5 /recovery ext4 /dev/block/nandg (null) 0
6 /cache ext4 /dev/block/nandh (null) 0
7 /sdcard vfat /dev/block/mmcblk0p1 /dev/block/nandk 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /emmc during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
I:Processing arguments.
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/command
stat /dev/block/nandf try 1: No such file or directory
stat /dev/block/nandf try 2: No such file or directory
stat /dev/block/nandf try 3: No such file or directory
stat /dev/block/nandf try 4: No such file or directory
stat /dev/block/nandf try 5: No such file or directory
stat /dev/block/nandf try 6: No such file or directory
stat /dev/block/nandf try 7: No such file or directory
stat /dev/block/nandf try 8: No such file or directory
stat /dev/block/nandf try 9: No such file or directory
stat /dev/block/nandf try 10: No such file or directory
failed to stat /dev/block/nandf
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.boot.baseband=m1190_gsm
ro.serialno=
ro.bootmode=unknown
ro.baseband=m1190_gsm
ro.bootloader=unknown
ro.hardware=sun5i
ro.revision=41275
ro.emmc=0
ro.boot.emmc=0
ro.factorytest=0
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mass_storage,adb
ro.build.id=IMM76D
ro.build.display.id=f761K_dblgc0308_ep_2g_V1.1.13_20130604_m828_d92686a
ro.build.version.incremental=20130604
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=2013年 06月 04日 星期二 10:28:35 CST
ro.build.date.utc=1370312915
ro.build.type=eng
ro.build.user=csj
ro.build.host=broncho
ro.build.tags=test-keys
ro.product.model=Softwinerf761K
ro.product.brand=softwinners
ro.product.name=nuclear_f761K
ro.product.device=nuclear-f761K
ro.product.board=nuclear
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
ro.build.product=nuclear-f761K
ro.build.description=Softwinerf761K_V1.1.13_20130604_m828_d92686a
ro.build.fingerprint=softwinners/nuclear_f761K/nuclear-f761K:4.0.4/IMM76D/20130604:eng/test-keys
ro.build.characteristics=tablet
ro.broncho.id=Softwinerf761K_V1.1.13_20130604_m828_d92686a
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=48m
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.opengles.version=131072
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
persist.sampling_profiler=1
ro.property.tabletUI=true
ro.udisk.lable=NUCLEAR
ro.product.firmware=1.5rc3
ro.broncho.MOT=y
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
init.svc.ueventd=running
init.svc.recovery=running
service.adb.root=1
init.svc.adbd=running
I:Checking for extendedcommand...
I:Skipping execution of extendedcommand, file not found...
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
W:failed to mount /dev/block/nandh (No such file or directory)
W:Can't unlink /cache/recovery/command
-- Installing: /sdcard/stockrecovery.zip
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:failed to open last_install: No such file or directory
Finding update package...
I:Update location: /sdcard/stockrecovery.zip
Opening update package...
Installing update...
E:Error in /sdcard/stockrecovery.zip
(Status 0)
Installation aborted.
-- Installing: /sdcard/stockrecovery.zip
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/last_install
E:failed to open last_install: No such file or directory
Finding update package...
I:Update location: /sdcard/stockrecovery.zip
Opening update package...
Installing update...
E:Error in /sdcard/stockrecovery.zip
(Status 0)
Installation aborted.
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
W:failed to mount /dev/block/nandh (No such file or directory)
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
W:failed to mount /dev/block/nandh (No such file or directory)
W:Can't unlink /cache/recovery/command
I:Can't format unknown volume: /external_sd
I:Can't format unknown volume: /emmc
see inside these directories:
sys/dev/block/mmcblk0
sys/dev/block/mmcblk0p1
sys/dev/block/mmcblk0p2
and sys/dev/block/rk29xx/
or any directory inside the "block" directory.
there are files named "name"
open them with a text editor. the first line says for which partition is this file. if you found "recovery" word in that file. then that block is for your recovery partition.
now for example if it was "rk29xx" replace this with "nandg" in your code.
something like this:
dd if=/sdcard/recovery.img of=/dev/block/rk29xx
Hello. I need some help with installing custom ROM on my phone please. I am using QMobile Noir A500. You see, I rooted it some time ago and installed a custom ROM which ran just fine but then I again wanted to flash another ROM so I downloaded it and alongwith it a .zip which was supposed tto change the boot logo of my phon. Since i flashed this file I haven't been able to flash any ROM whatsoever. I was able to generate a report of it using ROM Manager which is as follows.
Starting recovery on Wed Aug 20 15:28:17 2014
can't open /dev/tty0: No such file or directory
framebuffer: fd 3 (480 x 854)
ioctl(): blank: Invalid argument
ioctl(): blank: Invalid argument
CWM automade 17.08.2013 21:03:08
recovery filesystem table
=========================
0 /tmp ramdisk (null) (null) 0
1 /misc emmc /dev/misc (null) 0
2 /data ext4 /dev/block/mmcblk0p7 (null) 0
3 /system ext4 /dev/block/mmcblk0p5 (null) 0
4 /cache ext4 /dev/block/mmcblk0p6 (null) 0
5 /boot emmc /dev/bootimg (null) 0
6 /recovery emmc /dev/recovery (null) 0
7 /emmc vfat /dev/block/mmcblk0p8 (null) 0
8 /sdcard vfat /dev/block/mmcblk1p1 (null) 0
9 /sd-ext auto /dev/block/mmcblk1p2 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.sys.usb.config=mass_storage,adb
ro.build.id=IMM76L
ro.build.display.id=full_MTK-eng 4.0.4 IMM76L eng.rua1.20130129.114933 test-keys
ro.build.version.incremental=eng.rua1.20130129.114 933
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=Вто Янв 29 11:51:46 MSK 2013
ro.build.date.utc=0
ro.build.type=eng
ro.build.user=rua1
ro.build.host=rua1-desktop
ro.build.tags=test-keys
ro.product.model=Full Android on Emulator
ro.product.brand=Android
ro.product.name=full_MTK
ro.product.device=MTK
ro.product.board=MTK
ro.product.cpu.abi=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=unknown
ro.build.product=MTK
ro.build.description=full_MTK-eng 4.0.4 IMM76L eng.rua1.20130129.114933 test-keys
ro.build.fingerprint=Android/full_MTK/MTK:4.0.4/IMM76L/eng.rua1.20130129.114933:eng/test-keys
ro.build.characteristics=default
ro.cm.device=MTK
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
net.change=net.bt.name
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.factorytest=0
ro.serialno=
ro.bootmode=unknown
ro.baseband=unknown
ro.carrier=unknown
ro.bootloader=unknown
ro.hardware=mt6589
ro.revision=0
ro.emmc=0
sys.usb.vid=0BB4
init.svc.recovery=running
sys.usb.config=mass_storage,adb
service.adb.root=1
init.svc.adbd=restarting
sys.usb.state=mass_storage,adb
I:Checking for extendedcommand...
I:Running extendedcommand...
Waiting for SD Card to mount (20s)
SD Card mounted...
Verifying SD Card marker...
I:Running script:
I:
run_program("/sbin/cp", "-R", "/cache/recovery", "/tmp/recovery");
ui_print("ROM Manager Version 5.5.3.7");
ui_print("August 20, 2014");
ui_print("Preparing to install ROM...");
run_program("/cache/dowipedalvikcache.sh");
mount("/system");
run_program("/sbin/chmod", "+x", "/tmp/recovery/11-rommanager.sh");
run_program("/tmp/recovery/11-rommanager.sh", "place");
run_program("/sbin/umount", "/system");
assert(install_zip("/sdcard/note3rom.zip"));
parse returned 0; 0 errors encountered
about to run program [/sbin/cp] with 4 args
ROM Manager Version 5.5.3.7
August 20, 2014
Preparing to install ROM...
about to run program [/cache/dowipedalvikcache.sh] with 1 args
mount: mounting /dev/block/mmcblk0p6 on /cache failed: Device or resource busy
mount: mounting /dev/block/mmcblk1p2 on /sd-ext failed: No such file or directory
umount: can't umount /sd-ext: Invalid argument
run_program: child exited with status 1
about to run program [/sbin/chmod] with 3 args
about to run program [/tmp/recovery/11-rommanager.sh] with 2 args
mount: mounting /dev/block/mmcblk0p5 on /system failed: Device or resource busy
about to run program [/sbin/umount] with 2 args
-- Installing: /sdcard/note3rom.zip
Finding update package...
I:Update location: /sdcard/note3rom.zip
Opening update package...
minzip: Invalid entries=2080 offset=452264
Please I need the help.