Related
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
Anyone in here can help me please? I tried to root my samsung galaxy player 4.0. I read lots of topics about rooting using superoneclick V2.2. I enable USB debugging mode, unmount my SD, installed samsung kie on my computer, plug in the cable and click connecting. And I run superoneclick.exe as Admin and I click ROOT! But after few mins, few lines show up and the root not work.
Here is the picture of the rooting result after waited few mins, still nothing happen. Please Help, I dont wanna try again until I find out if I did anything wrong. It has something to do with ADB interface or something?
Have you loaded an insecure kernel using Odin?
SusieGalaxy880 said:
Anyone in here can help me please? I tried to root my samsung galaxy player 4.0. I read lots of topics about rooting using superoneclick V2.2. I enable USB debugging mode, unmount my SD, installed samsung kie on my computer, plug in the cable and click connecting. And I run superoneclick.exe as Admin and I click ROOT! But after few mins, few lines show up and the root not work.
Here is the picture of the rooting result after waited few mins, still nothing happen. Please Help, I dont wanna try again until I find out if I did anything wrong. It has something to do with ADB interface or something?
Click to expand...
Click to collapse
The easiest way to gain root would be to flash a ROM that has root already. Such as this stock ROM: http://forum.xda-developers.com/showthread.php?t=1512331
nop, duno what is that. Im new android user, I only have this device for few days. In youtube video, those ppl never mention any other step.
1) install samsung kie
2) enable USB debugging mode
3) unmount SD card
4) pluged in usb cable (i click connect on my device, it is in mass storage, or I shouldn't have to click anything? I Just plug in the cable and hit root on superoneclick?)
These kinda more difficul steps,, and i dont wanna mess any of those because if any step goes wrong, I duno how to fix it. Aren't most people use the easy way to superoneclick to root and successful? I just want to know which step I did wrong for my fail root. I dont wanna mess with any deeper or more diffiuclt stuff.
SusieGalaxy880 said:
nop, duno what is that. Im new android user, I only have this device for few days. In youtube video, those ppl never mention any other step.
1) install samsung kie
2) enable USB debugging mode
3) unmount SD card
4) pluged in usb cable (i click connect on my device, it is in mass storage, or I shouldn't have to click anything? I Just plug in the cable and hit root on superoneclick?)
Click to expand...
Click to collapse
You shouldn't have connected mass storage.
I think my problem is the driver not propertly installed + I click connect to mass storage on the device.
I heard we need
1) Microsoft.NET Framework 4+ (I have win 7, so already has)
2) Samsung USB driver to mobile phone (samsung Kies come with that usb driver.)
3) Do I also need to install the Android SDK/ADB driver?
SusieGalaxy880 said:
I think my problem is the driver not propertly installed + I click connect to mass storage on the device.
I heard we need
1) Microsoft.NET Framework 4+ (I have win 7, so already has)
2) Samsung USB driver to mobile phone (samsung Kies come with that usb driver.)
3) Do I also need to install the Android SDK/ADB driver?
Click to expand...
Click to collapse
From my experience just have Windows 7 doesn't ensure have framework 4+ so check for a download on that.
If your USB debugging mode is ON then you shouldn't get the "connect mass storage" option on the device at all, so double check that (uncheck and recheck it if necessary.
Personally I choose to skip Kies entirely and just download the drivers only, but the first time you plug the player in with Debugging on windows should do it driver search thing down by the clock and it installs (i think 3) different drivers for the player (different then the mass storage driver) if you jumped in to superoneclick before that finished that may have been part of the problem, if you didn't get those to install then sounds like a driver issue.
I just tried the 2nd time, the result is the same. FAILED!!!
I window update everything including the microsoft.NET framework 4+. Restart computer.
Uninstall samsung kies and the prior samsung driver, and I downloaded the newer V1.4 Samsung USB driver for mobile phone from XDA forum and installed, restarted computer.
I didnt press any key while on the device to get into mass storage mode.
I plug in the cable, on USB debugging mode + unmount SD card.
I wait for driver software installation "READY TO USE" as u can see in the new picture, with all the check mark on. This time i though I can make it throught, but as u can see the result on left side, almsot similar result. =(
"No such file or directory" not an single OK. If successuf rooting, i see people get 'OK' on each step. This time i really follow each every step, still fail!!!
I have no idea what is the problem? Everyone seem successful ROOT first time.
Did I miss an very important step or my device already mess up somehow?
I only didnt install ADB driver, but no one talk about needed to install that before ROOTING.
SusieGalaxy880 said:
I just tried the 2nd time, the result is the same. FAILED!!!
I window update everything including the microsoft.NET framework 4+. Restart computer.
Uninstall samsung kies and the prior samsung driver, and I downloaded the newer V1.4 Samsung USB driver for mobile phone from XDA forum and installed, restarted computer.
I didnt press any key while on the device to get into mass storage mode.
I plug in the cable, on USB debugging mode + unmount SD card.
I wait for driver software installation "READY TO USE" as u can see in the new picture, with all the check mark on. This time i though I can make it throught, but as u can see the result on left side, almsot similar result. =(
"No such file or directory" not an single OK. If successuf rooting, i see people get 'OK' on each step. This time i really follow each every step, still fail!!!
I have no idea what is the problem? Everyone seem successful ROOT first time.
Did I miss an very important step or my device already mess up somehow?
I only didnt install ADB driver, but no one talk about needed to install that before ROOTING.
Click to expand...
Click to collapse
have you tried resarting your player then enable usb debugging then plugging in the USB?
Also where did you get your Superoneclick?
I didnt restart my device before rooting.
I got the superoneclick from XDA main page the offical one with 500+ page of posts and reply. "Superoneclickv2.2 -shortfuse.zip"
Try using doomlords rooting toolkit, it worked for me.
http://forum.xda-developers.com/showthread.php?p=18805532
thanks for info, but I duno how to use the DooMLoRD's Easy Rooting Toolkit. Any instruction? I have no idea why my device is so diffiuclt to root, as other people rooted very easy
I used version 2.3.3 to root mine.
Got to shortfuse.org and scroll down to the 2.3.3 download link.
I tired the 3rd time today, failed again, same outcome. This time I follow each step carefully, and I used superoneclick v2.3.3 Before ROOT, I make sure all the "READY TO USE" check mark on. But still hang at Shell Rooting device step #5. I patient waited for 20mins, still hang at this step.
I shoulda try root when I got it first day. Is there possible some mess up app might cause this? I never heard anyone have any diffiuclty Rooting their galaxy player 4.0 YP-G1 US version with superoneclick after so many tried. I officially give up. I only have this device for 1 week..............
Kernal Version 2.6.35.7-G1UEKI8-CL562400 [email protected] #2
Build # Gingerbread.UEKI8
Firmware V2.3.5
Model Number: YP-G1
I found a very important issue might cause this failed. When I check the unzip folder, the Expoits folder IS NO FILE, EMPTY, but when I check the original zip file, it has 3 important files "GingerBreak,psneuter, zergRush" files (on the v2.2) I try unzip on desktop, pull out this Exploit folder, pull out the file, none work. I even uninstall winRAR and restall the newer version. These 3 files on the exploit folder in superoneclick v2.2 seem CANNOT pull out of the zip file no matter what I try. I think on shell Rooting device step #3 started the problem cuz cannot locate these few important exploit files. I just found out the unzip folder have no those file (psneuter,zergRush), while the original zip file has, and I cannoot pull out those file out of the zip folder NO MATTER WHAT I TRIED. Both superoneclick v2.2 and v2.3.3 exploit folder, i cannot get those file out of the zip folder.
Got rooted successful the 4th tired. Problem is my antiviurs always remove the psneuter & zergRush files in exploit folder when I extract everytime. And I didnt notice this problem. So I was rooting without these 2 important files in superoneclick folder. Now I disable antivirus, so i can extract those file and start rooting, after done rooting, i turn antivirus back on.
another problem
daniel644 said:
have you tried resarting your player then enable usb debugging then plugging in the USB?
Also where did you get your Superoneclick?
Click to expand...
Click to collapse
can someone help me i have the ``firmware uprade encountered....``
i can go to the the warning but
-if i press up to continue it return to firmware....
-if i press down the same thing
thanks.
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
GTP7510MAYXAR wont connect to pc, usb not recognized. In odin mode it does the same. Pc doesnt have bluetooth either.
When inserting a usb female connector it does say usb connection, but the usb flash drives did not show. Tablet
also charges healthy.
I want to root this, install clockwork recovery, flash rom to jb 4.2.2, but without the help of that pc i am stuck on 4.04 stock.
Bought this from someone so no previous exp with this device.
Any way to root and install recovery with tablet alone itself?
Thank you for your time:laugh:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
arashtarafar said:
Maybe I'm underestimating your experience, but you can try this to see whether USB storage works:
Go to Settings -> Storage -> the 3-lined menu button at the top right corner -> USB PC connection -> Media device (MTP)
I wish this can help. if you have further questions we are here to help at any time.
Good luck!
Click to expand...
Click to collapse
Ofcourse i tried it hihi:highfive:
But i am starting to think its faulty hardware as no one has any idea about the issue
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
TheDoctah said:
I actually bought mine in the exact same condition. It would not work on usb no matter what i did also a few other 'bugs' I thought it was a faulty cable but it turned out to be corrupted files on the rom.
Long story short, reatoring the tab to factory via ODIN fixed everything.
Follow this thread for help
http://forum.xda-developers.com/showthread.php?t=2142268
Click to expand...
Click to collapse
:crying:
My tablet gets the same "not recognized" error in odin mode ;( when connecting it to pc. :crying:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
teun3sixty said:
Please someone help a fellow owner of the best tablet to make it even better, is there any way for me to install a custom rom without usb?
Click to expand...
Click to collapse
Well, you could use mobile ODIN or Rom Manager. However, you need to be able to pull the backup you're going to make before you install that custom rom off of the device. Using USB is a simple way of doing that. It's possible to get it off over WiFi, but you really should fix the USB.
Hi guys,
I'm new to this forum. I've got a Samsung i777 on android 2.3.6 kernel 2.6.35.7 build number gingerbread.uckk6
I've recently bought this phone off ebay
My phone does not get detected by windows 7 or Macbook. I've tried changing the USB flex cable with I9100 v2.3 but still no luck.
When I connect USB port it beeps and shows mtp-initialization/mtp-connected on the phone but it is not shown on windows. It says USB cannot recognise the device. I've got a s3 and ideos x3 both of them are detected.
I've installed kies 3 on my laptop.
I had to swtich off the wifi on the phone because it consumes a lot of battery, I think it is because of the android version I'm using!
I want to root the phone and unlock it!!
Any help is appreciated!
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
I'm guessing the problem is the Samsung drivers you have installed for the s3. Try uninstalling those and installing the correct drivers for s2.
Sent from my GT-p511x
you can check this thread for driver
http://forum.xda-developers.com/showthread.php?t=961956
You most likely need a new cable. Happened to me once! Could be the drivers but I HIGHLY recommend just trying a new USB cable.
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
kshah1606 said:
Thank you guys for all your help really appreciate it!
I have tried all the steps mentioned above tried to uninstall all the previous drivers I had and installed the new driver as mentioned in the above link but no luck
I tried it on a friends computer with a different cable still it shows the USB device is not recognised!!
Click to expand...
Click to collapse
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
You could also download an app that allows you to enter download mode.
SighIsAnonymous said:
Did you install another ROM? It might help to Wipe system, Data, ETC! it appears to be a software problem. Or at least my guess is the ROM your using.
Click to expand...
Click to collapse
How would I be able to change the ROM if the phone is not detected
jpasher said:
The Galaxy phones all use the same USB drivers whether it's an S2, S3, S4, etc., so if the installed drivers were working for your S3, it's unlikely to be a driver issue.
Can you boot it into download mode? If you happen to have a USB jig, that's the easiest. Otherwise, power off the phone, unplug the USB cable, hold Vol +/Vol-, then plug in the USB cable. It should go into ODIN download mode. See if Windows detects the phone that way. If so, it very well could be something weird with the OS installed (although it appears to be stock).
If you can get into download mode, you can flash a stock kernel to make sure you are starting fresh. A good file repository is found here. I recommend the stock UCKH7 image I777_UCKH7_OCD_No_BL.7z (you'll also get root).
And yes, the UCKK6 release had a serious bug related to the wifi that could drain your battery. Best to go with UCKH7.
Click to expand...
Click to collapse
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Yes I guess this rom is useless, if the wifi is switched on then battery would not even last 6 hrs!
kshah1606 said:
I was able to boot to download mode by holding the vol +/- key and then plugging in the USB cable but there is no movement from the computer it doesn't make a sound nor does it detect. I tried restarting the phone then I get a notification on windows that USB device not recognised!
Click to expand...
Click to collapse
Are you saying to get a balloon notification in the tray that says the USB device is not recognized? A possible reason for that is a faulty USB cable or USB port (funny enough, I actually got that message last night when I was playing around with my Captivate, and switching USB ports made it work). I know you said you've tried other computers an another USB cable, but that's about my only idea. Maybe there's some debris inside the connector that's messing up the connection.
When you say you changed the "USB flex cable", are you talking about the internal connector and board inside the phone? If so, perhaps the I777 connector board is actually a little different than the I9100 board and causing a compatibility issue.
The bug in UCKK6 related to wifi didn't affect everybody, but it definitely affected a lot of people (based upon reports here).
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
If you have an SD card, you can download another ROM on that SD card from your computer and then you can install custom recovery (CWM) and then install the ROM from SD card.
kshah1606 said:
How would I be able to change the ROM if the phone is not detected
Click to expand...
Click to collapse
First ill run you through the problem I had. Just for reference did you use Mr. Cooks script before flashing Cyanogenmod 11? One of his scripts for cleaning before flashing, actually deletes a certain file, not to keen on which one. What it results in though is not being able to flash OF ROMS and some certain custom ROMS! So id recommend alliance's ROM! As for the "Getting the ROM on your device, you could put the ROM on your SD though recovery "Mount and storage/Mount mass storage/" or just use a micro sd card adapter and move it on there that way.
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Your help is appreciated
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
kshah1606 said:
Thanks for your reply. Would you mind sending me the link on how to do that step by step as mentioned I'm new to Samsung phones and also this forum.
Click to expand...
Click to collapse
What state is your phone currently in? Is it still not detected by the computer? You are still on 2.3.6, correct?
If it's still not being detected by your computer, I'm not sure if you can flash anything needed using the stock recovery. I know that when I flashed stock JB, I was able to boot into stock recovery and directly apply the standard CWM update file here. It will give boot into a temporary CWM that should allow you to flash other ZIP files (like a ROM), although I had trouble doing that (so I ended up flashing the AJK_v4.9_NoSwap.zip kernel using the MobileOdin android app, which gave a permanent CWM recovery).
I'm not sure if this same process works with the 2.3.6 recovery. However, in order to get the stock recovery to see the internal SD card, I had to run adb shell commands to mount the partition (meaning I had to have a working connection from the computer).
Solved!!!
HI Guys,
Many many thanks for all your responses!
I have changed the USB flex cable again to an older version v2.2 and my phone is currently being detected by kies! So relieved thanks a lot for all your help..now the rooting begins!!:laugh: