Hi all,
I have a UK o2 gs2 which I would like to flash back to stock, but I'm not sure which to chose from this thread
http://forum.xda-developers.com/showthread.php?t=1075278
It was one of the first which was unbranded and unlocked.
Thanks in advance
A[L]C
The most recent. However, I think you'll find most/all of the links in that thread are still dead. Might want to head over to Samfirmware & download it. Then flash it following whatever instructions they have for flashing firmware downloaded from their site.
Or you could find/download the PC version of Checkfus. This will enable you to download the latest firmware available for your country/carrier that you'd normally get via Kies. Once you've downloaded it, flash it following the instructions from Intratech's thread you linked to in your OP.
KI4 is stock for uk
Sent from my back passage
Thanks to both of you
Related
Hi There,
I purchased my SGS2 outright from O2 UK and I'm on a pay monthly SIM-only plan with O2. The phone came loaded with the stock O2 UK firmware and whenever I connected it to Kies it would recognize the firmware and say that the current firmware is up to date, which was fine. Since then I have played around with rooting my phone, installing different mods and installing newer stock samsung firmwares to try out Android version 2.3.4. etc.
After all this playing around I wanted to be sure that I could get my phone back to the standard O2 UK branded configuration in case I ever needed to send it in under warranty for repair. I hunted around on the internet and found a website with a link to a copy of the official O2 UK branded firmware which was a tarball called: I9100XWKDD_I9100XXKDH_I9100O2UKD1_HOME.TAR. Using odin I flashed my phone with this firmware and now my phone starts up with the O2 logo and everything seems back to normal, except when I connect it to Kies. I know for a fact that the O2 firmware I'm now on has been superseded by newer releases from O2, but when I connect to Kies, it says:
"Your device does not support software upgrading via kies. Current firmware version: I9100XWKDD/I9100O2UKD1/I9100XXKDH/I9100XWKDD"
I'm guessing that there is something else on my phone that I need to install/flash/change for Kies to start recognizing it as "Official". Does anyone know what this might be? What is it that Kies looks for on your phone to work out if it supports upgrading it or not? I am running the latest version of Kies.
I have attached a screenshot from my kies to show you what I'm talking about and a screenshot from my phone to show you software/firmware versions it is running.
Any help would be very much appreciated.
Cheers
tommyteacosy said:
Hi There,
I purchased my SGS2 outright from O2 UK and I'm on a pay monthly SIM-only plan with O2. The phone came loaded with the stock O2 UK firmware and whenever I connected it to Kies it would recognize the firmware and say that the current firmware is up to date, which was fine. Since then I have played around with rooting my phone, installing different mods and installing newer stock samsung firmwares to try out Android version 2.3.4. etc.
After all this playing around I wanted to be sure that I could get my phone back to the standard O2 UK branded configuration in case I ever needed to send it in under warranty for repair. I hunted around on the internet and found a website with a link to a copy of the official O2 UK branded firmware which was a tarball called: I9100XWKDD_I9100XXKDH_I9100O2UKD1_HOME.TAR. Using odin I flashed my phone with this firmware and now my phone starts up with the O2 logo and everything seems back to normal, except when I connect it to Kies. I know for a fact that the O2 firmware I'm now on has been superseded by newer releases from O2, but when I connect to Kies, it says:
"Your device does not support software upgrading via kies. Current firmware version: I9100XWKDD/I9100O2UKD1/I9100XXKDH/I9100XWKDD"
I'm guessing that there is something else on my phone that I need to install/flash/change for Kies to start recognizing it as "Official". Does anyone know what this might be? What is it that Kies looks for on your phone to work out if it supports upgrading it or not? I am running the latest version of Kies.
I have attached a screenshot from my kies to show you what I'm talking about and a screenshot from my phone to show you software/firmware versions it is running.
Any help would be very much appreciated.
Cheers
Click to expand...
Click to collapse
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
It_ler said:
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
Click to expand...
Click to collapse
You are a lifesaver! Thank you so much for your recommendations. I downloaded Check Fus Downloader which I was then able to use to download the latest O2 UK firmware, which, as it turns out, was only released yesterday and uses android 2.3.5. I then used odin to flash the new firmware and now when I connect to Kies it says I have the latest firmware installed.
Happy Days!! and Thanks again!
It_ler said:
I have got two recommendations for you:
1. Have a look at http://fus.nanzen.se/ to get Check Fus Downloader and check what the latest official firmware for your phone and region is.
2. Got to Intratech's Carrier Branded Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1113928 to get the carrier branded firmware you want/need to flash using Odin.
If you do not need a carrier branded firmware (Kies does not need a branded ROM on your phone), you can also check Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278 to get the latest official and un-branded firmware flashable via Odin.
See second post of his thread.
If you flash a stock ROM for your region, KIES should recognize it again.
Good luck !
Click to expand...
Click to collapse
I have the same issue, when i upgraded the Stock firmware. When connect to Kies, message popup is "Your device does not support software upgrading via kies. Current firmware version: ...XXKH2"
I have reset to factory format my SG2 9100 (watch this video http://www.youtube.com/watch?v=FzDb6m7sQ7A&feature=related). After that when i connect it showing current and latest firmware..
I did exactly the same as the OP. I just flashed back to the latest carrier firmware and Kies still does not recognize it but I don't really care.
My question is: if I send it to warranty, is there any way they can see I have previously installed other official firmwares from Intratech's thread? I have never rooted it, only installed official firmwares.
Thanks.
nevrozel said:
I did exactly the same as the OP. I just flashed back to the latest carrier firmware and Kies still does not recognize it but I don't really care.
My question is: if I send it to warranty, is there any way they can see I have previously installed other official firmwares from Intratech's thread? I have never rooted it, only installed official firmwares.
Thanks.
Click to expand...
Click to collapse
Samsung honour official firmware for warranty does not matter if you have reflashed as long as the firmware is stock and custom rom counter is zero .
jje
tommyteacosy said:
You are a lifesaver! Thank you so much for your recommendations. I downloaded Check Fus Downloader which I was then able to use to download the latest O2 UK firmware, which, as it turns out, was only released yesterday and uses android 2.3.5. I then used odin to flash the new firmware and now when I connect to Kies it says I have the latest firmware installed.
Happy Days!! and Thanks again!
Click to expand...
Click to collapse
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
antzlisoul said:
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
Click to expand...
Click to collapse
You need to reroot as you have wiped the root kernel .
jje
antzlisoul said:
If you flashed the firmware using Odin, will you stay rooted after that? Or you will have to root it again? Sorry, I'm new to the Android world.
Thanks in advance,
Click to expand...
Click to collapse
Depends on what firmware. Some custom firmwares come rooted. Official stock firmwares do not.
Hello,
I upgraded my galaxy S2 to the SFR (France) ICS firmware I9100SFRLP7 by using CheckFusDownloader. It works but unfortunately my mobile is still not recognized by Kies. The message "your device does not support software upgrading via kies" is displayed on the screen.
Phone Info:
PDA: I9100BULPC
PHONE: I9100BULP6
CSC: I9100SFRLP7
Any idea ? If the CSC is not correct, what is the correct one and how to change it ?
Thanks for your help.
Hi,
I have a Telstra (Australia) Galaxy SII with the version information :
PDA: DVKF4
Phone: DVKF2
CSC: TELKF3
I found the thread which contains the links to a number of different firmwares
http://forum.xda-developers.com/showthread.php?t=1075278
There are so many version there, I don't know which is appropriate for my phone.
Telstra has not released an update and there seems to be no plans to do so. The phone is still at V2.3.3. Great network, crap customer service......
I would like flash the phone with a genric rom so I can receive updates.
Can anyone advise me on what ROM I should use for Australia?
Any help would be appreciated.
Regards
John
go here:
http://forum.xda-developers.com/showthread.php?t=1113928
Charlie C
Charlie,
Thanks for your reply.
I found the Telstra section and I am still confused.
This is what I found:
Australia
DVKF4: http://www.multiupload.com/UAZPBM0XAS
Firmware info: PDA DVKF4| PHONE DVKF2| CSC:TELKF3
DVKF4 Stock Kernel:http://www.multiupload.com/91ID4RZEMO
Password: [email protected]
What is the difference between the downloads?
I assume the first link is the ROM I currently have in my phone. What is the Stock Kernel?
Regards
John
PS: I need an idiot's guide.
pellajl said:
Charlie,
Thanks for your reply.
I found the Telstra section and I am still confused.
This is what I found:
Australia
DVKF4: http://www.multiupload.com/UAZPBM0XAS
Firmware info: PDA DVKF4| PHONE DVKF2| CSC:TELKF3
DVKF4 Stock Kernel:http://www.multiupload.com/91ID4RZEMO
Password: [email protected]
What is the difference between the downloads?
I assume the first link is the ROM I currently have in my phone. What is the Stock Kernel?
Regards
John
PS: I need an idiots guide.
Click to expand...
Click to collapse
The first link includes the rom (stock im guessing) along with the second link, which is just the kernel.
Are you trying to flash a custom rom, or just official, because the download link rom is probably no different than the one you currently have on your phone. (if you havent flashed any rom yet)
If you are trying to flash a custom rom, I dont think any custom rom allows you to get the official update. (might be wrong)
I see.....
What I am looking for is an official generic ROM that is suitable in Australia.
I used to have an SE X10 before it died and I had a generic ROM flashed from the DaVinci site.
This thread http://forum.xda-developers.com/showthread.php?t=1075278 has a truck load of official ROMs and many Frankenstein ROMs which I assume are the custom ROMs.
My understanding is that if you flash with a generic ROM, you will get official ROMs when they are released by Samsung and you don't have to wait for your doppy carrier to provide a their cutomised version.
Is this correct?
Yes. If you flash one of those official firmwares from either of Intra's threads, you should be able to receive OTA updates via Kies. You can also use a PC app called Checkfus (search for it on here) to get official updates normally available via Kies (if you can't get updates via Kies for some reason).
P.S - For future reference, questions go in Q&A
pellajl said:
I see.....
What I am looking for is an official generic ROM that is suitable in Australia.
I used to have an SE X10 before it died and I had a generic ROM flashed from the DaVinci site.
This thread http://forum.xda-developers.com/showthread.php?t=1075278 has a truck load of official ROMs and many Frankenstein ROMs which I assume are the custom ROMs.
My understanding is that if you flash with a generic ROM, you will get official ROMs when they are released by Samsung and you don't have to wait for your doppy carrier to provide a their cutomised version.
Is this correct?
Click to expand...
Click to collapse
Dont flash the Frankenstein firmware then:
+++++++[Frankenstein Firmwares]+++++++
These packages below are not official firmware packages, they are Frankenstein package created due to demand for Firmware with different CSC and modems and also leaked firmware packages. KIES will not recognise the firmware so you won't be able to update to new firmware using KIES unless you flash back to a firmware meant for your device first. Otherwise there will always be Odin to use for updates
Click to expand...
Click to collapse
Hi,
my sister is having a problem trying to downgrade to stock rom after she put a cusom rom (I9100XXPL6) on her phone and is having some issies with it. she didnt take note of some vital information before she flashed it and i think she didnt follow steps properly and she did not backup her phone.
currently her phone says the following when doing *#1234#
Phone bought in UK
PDA: I9100XXLP6
Phone: I9100XXLP6
CSC: Unknown
Build: January 17 2012
she has tried going to stock but it soft bricked her phone so she reflashed her phone with I9100XXLP6 and got it working again, i asked her where she got the rom from and she does not know, the phone was flashed when not rooted etc, as the guide she used said that it didnt have to be done, also she cannot remember what guide she followed.
all i know is that she had 2.3.6 and that her phone was from phones4u in the UK (guessing unbranded) and flashed it though odin (she cannot remember what she done, i guess she had Kies running maybe, i read alot of other posts). i have checked the thread for stock roms but all the links are multiupload which is not longer valid as we know.
i have never flashed a galaxy S2 I9100 and i have never used the phone at all. if anyone knows what stock rom to use and if they can mirror the relevant files it would be appreciated
have looked at [GUIDE] Fix an unflashable or soft bricked GSII but the kernal and bootloader links are multiupload and can only get the recovery package
i have experiance flashing phones and tablets just not the galaxy S2, any help would be apreciated
this is the correct thread for unbranded firmwares
http://forum.xda-developers.com/showthread.php?t=1075278
find your UK unbranded FW and flash through ODIN
Search Sammobile to find stock firmware to flash via Odin.
sammobile firmwares all have the correspondent new firmwares bootloaders. so if you flash a FW from sammobile you won't be able to reset the custom binary counter via a Jig. download from Intratech's thread.
oh, and you do not have to follow the soft bricked thread if your phone is working.
just download a FW, put phone in download mode and flash using Odin.
Do what the others have said but make sure you read all the instructions! There are a few howto videos here http://galaxys2root.com/category/galaxy-s2-root/. Just remember your UK phone is the International i9100 model. Good luck.
Thanks for the help, I git the phone back to stock rom
Sent from my HTC Sensation Z710e
Hello, xdadevelopers.
Iv'e currently bricked my Samsung galaxy s2 I9100 v2.3.4
I can only see the error: Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. And enter: Download mode.
I know that the solution is by flashing the phone with the stock rom, and I found
this thread: http://forum.xda-developers.com/showthread.php?t=1075278
But the first problem is that I don't know the weird XXK4 or XXHKG1929 bla bla whatever it is called and also none of the downloads work because they are from Megaupload. Could someone tell my how to locate my phones XX number for 2.3.4 And give me a working download?
And btw I don't have Kies installed.
Search Samfirmware.com for the original firmware that came with your phone, or if you're happy with the latest firmware available for your carrier/country that you'd normally get via Kies, use the PC version of Checkfus (search for it on here).
Edit to add - You might as well get Checkfus in any event. Given you don't know what firmware came with your phone, if you choose your carrier & country in Checkfus it will tell you what the original firmware was. You won't be able to download this with Checkfus (only the latest), but at least you'll know what to search for on Samfirmware.
MistahBungle said:
Search Samfirmware.com for the original firmware that came with your phone, or if you're happy with the latest firmware available for your carrier/country that you'd normally get via Kies, use the PC version of Checkfus (search for it on here).
Click to expand...
Click to collapse
Thanks ill look into it.
Hi so I'm trying to get my galaxy s2 back on stock firmwares, I just changed to gingerbread XWKI4 but now it won't update via kies.
Does anyone know why that would happen? Or what the official unbranded UK version of ICS is?
1. wrong forum
2. select your csc and try again
Brad2607 said:
Hi so I'm trying to get my galaxy s2 back on stock firmwares, I just changed to gingerbread XWKI4 but now it won't update via kies.
Does anyone know why that would happen? Or what the official unbranded UK version of ICS is?
Click to expand...
Click to collapse
If you know which stock firmware you want to go back to then you can just download the firmware from Intratech's thread and use odin to flash it. All the instructions and downloads can be found on this thread, read it carefully ..
http://forum.xda-developers.com/showthread.php?t=1075278
If you want to flash official unbranded UK ICS release then use Faryaab's Thread and flash the I9100XWLP7 ROM using Odin, the ROM can be downloaded from the 2nd post. Again follow the insturctions in the first post carefully.
http://forum.xda-developers.com/showthread.php?t=1544487
If you flash the unbranded UK ICS rom mentioned above and, as long as your phone is also unbranded, then Kies should detect your phone's firmware again. It stopped detecting it because you changed to a ROM that was not intended for your phone.