Well, I have a what seem to be an MTP issue with my GT-i9100 running stock 2.3.5 (XWKJ2) on XXKH3 baseband.
When I plug it to my mac all it does is charge without any notification whether on Debugging mode checked or without.sometimes it does state "MTP connected" on the notification bar but nevertheless doesn't do anything.
When going through setting>wireless and network>USB utils. it says "connect usb cable to use mass storage" when I do so, nothing happens e.i it's acting like nothing is plugged to the phone.
I thought it was a hardware related issue since the phone is not recognized by mac os x,windows or Kies.But when connecting it on download mode it does just fine with odin (flashed to ICS and back to stock without any issue), from which I guessed that it hasn't to do with the hardware.Nothing explicit on logcat or dmsg.
Cleaned the usb port, tried many cables and on many computers.
Looked for a solution on google, didn't find any clue.
Any idea?anything similar happened to anyone?
Untick usb debuding and have a look. Do you have samsung drivers on you pc?
078gregory said:
Untick usb debuding and have a look. Do you have samsung drivers on you pc?
Click to expand...
Click to collapse
As mentioned above, whether i check "usb debugging" or untick it, it doesn't change anything. And on windows yes, I have working samsung drivers, on mac os x they are not needed since I just want to use it as a mass storage device.
Had you previously rooted?
Sent from my GT-I9100 using Tapatalk
Yes sir.my phone is rooted and cwm installed.
Do you have this issue on a non rooted stock firmware? Try flashing an official firmware and see if the problem persists and post back.
Sent from my GT-I9100 using Tapatalk
yep.it doesn't work either on stock non rooted.I rooted back the phone just trying to get a software workaround for this issue.
Sounds like a failure of the port to switch to USB mode. You may need to replace a part. I'd suggest you take it to service.
ctomgee said:
Sounds like a failure of the port to switch to USB mode. You may need to replace a part. I'd suggest you take it to service.
Click to expand...
Click to collapse
Yup this is what I thought first.But if that was the case, it wouldn't work on odin under download mode.But it's actually the case, meaning the port can receive and send data without any problem.
will cost you unless you can reset your binary counter with a jig and flash back to stock for warranty purposes.
Sent from my GT-I9100 using Tapatalk
bubba949 said:
will cost you unless you can reset your binary counter with a jig and flash back to stock for warranty purposes.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
Well guys, taking it for a repair is not an option for me.Any other suggestion? Is there any hardware testing I can do my self?
belkacemi_sa said:
Yup this is what I thought first.But if that was the case, it wouldn't work on odin under download mode.But it's actually the case, meaning the port can receive and send data without any problem.
Click to expand...
Click to collapse
Oh, weird. So if you plug into your computer, can you open an ADB shell?
ctomgee said:
Oh, weird. So if you plug into your computer, can you open an ADB shell?
Click to expand...
Click to collapse
Nope, dab says no device connected.I will try to upgrade to the new ICS with new kernel and baseband and see if the issue is fixed.
Same problem here.. its the exact same problem and you're the first one i find who have same problem as mine, its frustrating i tried almost everything.. nothing worked beside ICS didn't fix it!
http://forum.xda-developers.com/showthread.php?p=23611773#post23611773
Hope it helps!
belkacemi_sa said:
Nope, dab says no device connected.I will try to upgrade to the new ICS with new kernel and baseband and see if the issue is fixed.
Click to expand...
Click to collapse
I doubt ICS will fix this, but it's worth a shot, I guess.
But before you do (if you haven't already), give this a try.
ctomgee said:
I doubt ICS will fix this, but it's worth a shot, I guess.
But before you do (if you haven't already), give this a try.
Click to expand...
Click to collapse
Unfortunately no, nothing of the above mentioned worked.And ICS update didn't do much either.Any other suggestion is welcome
Related
Hi guys,
I have a problem that's fairly common but I can't get it right
I can't install new drivers for my SGS2, my pc/laptop don't recognize it anymore.
I have flashed an ICS rom before so I also tried the Nexus S drivers, no success.
I have tried to work with Android SDK manager but since my laptop can't find my phone, it won't find it as an adb device.
I managed to get back on 2.3.3 via CWM manager but my USB jig also doesn't work anymore.
I have tried everything regarding Kies and new drivers so I'm pretty much out of hope... Anyone with suggestions?
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Makrilli said:
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Click to expand...
Click to collapse
Problem is that I can't flash back the old bootloader..
I think the logical step would be to try another PC, given you've tried everything else & nothing has worked.
You could also maybe try Heimdall (search for it on here).
Also, if you haven't tried different USB cables (in particular the one that came with the phone), give that a shot. Also make sure you're connecting the phone to a powered/mainboard USB port & not a hub port. Also, try toggling USB debugging in your phone settings.
That's about all I got. Try these things if you haven't already, but definitely try another PC.
MistahBungle said:
I think the logical step would be to try another PC, given you've tried everything else & nothing has worked.
You could also maybe try Heimdall (search for it on here).
Also, if you haven't tried different USB cables (in particular the one that came with the phone), give that a shot. Also make sure you're connecting the phone to a powered/mainboard USB port & not a hub port. Also, try toggling USB debugging in your phone settings.
That's about all I got. Try these things if you haven't already, but definitely try another PC.
Click to expand...
Click to collapse
I have tried different ports with different cables, different pc also won't install the drivers.
Usb debugging on/off doesn't work either.
Going to try heimdall today but it has something to do with my phone since I flashed so many files before with my pc and with my laptop.
Will post after I tried.
Yeah it sounds like a phone issue given you have been able to flash firmware with that PC previously. Good luck with Heimdall, fingers crossed for you.
Gepstra said:
I have tried different ports with different cables, different pc also won't install the drivers.
Usb debugging on/off doesn't work either.
Going to try heimdall today but it has something to do with my phone since I flashed so many files before with my pc and with my laptop.
Will post after I tried.
Click to expand...
Click to collapse
MistahBungle said:
Yeah it sounds like a phone issue given you have been able to flash firmware with that PC previously. Good luck with Heimdall, fingers crossed for you.
Click to expand...
Click to collapse
Nope, heimdall can't recognize my phone either.
Running out of ideas here.
I guess there isn't an option to flash the old bootloader other than Odin huh?
Unfortunately Mobile Odin can't flash bootloaders yet, so Odin (and probably Heimdall) are your only options. Either way you're going to need USB.
Gepstra said:
I guess there isn't an option to flash the old bootloader other than Odin huh?
Click to expand...
Click to collapse
hmm okay, well thanks for the help anyways.
Maybe I will send it to mobiletechvideos.com for repair.
MistahBungle said:
Unfortunately Mobile Odin can't flash bootloaders yet, so Odin (and probably Heimdall) are your only options. Either way you're going to need USB.
Click to expand...
Click to collapse
My PC recently stopped working properly it connects but always fails flashing via Odin, I managed to set up Odin etc on GF laptop so at least I can use Odin if needed. Could you not try restoring your PC to earlier date and see if that works or uninstall everything to do with phone, kies, Odin adb etc and do a fresh install of everything
Sent from my GT-I9100 using Tapatalk
seanicca said:
My PC recently stopped working properly it connects but always fails flashing via Odin, I managed to set up Odin etc on GF laptop so at least I can use Odin if needed. Could you not try restoring your PC to earlier date and see if that works or uninstall everything to do with phone, kies, Odin adb etc and do a fresh install of everything
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
My phone doesn't connect at all.
I have tried uninstalling everything including drivers and such via USBDeview.
The problem lies with the phone itself I think, not my pc.
I think I have found the problem.
I think my USB port from my phone is broken.
I will try to reset my binary counter with Triangleaway, then flash back original firmware without root and then send it for repair to the Vodafone shop!
Hope this works
Makrilli said:
You could use mobile odin, also if you flash back to ics you can reset counter with triangleaway and then flash back to gb
Sent from my sgs2 running cm9 using xda app
Click to expand...
Click to collapse
This was the right solution, thanks man!
I have the same problem. I came from CM9 and now I cannot connect my phone to the PC. I am using CheckRom V6.
Do you think it has to do with the bootloader? Or might the usb port be broken as well?
Schindler33 said:
I have the same problem. I came from CM9 and now I cannot connect my phone to the PC. I am using CheckRom V6.
Do you think it has to do with the bootloader? Or might the usb port be broken as well?
Click to expand...
Click to collapse
Yeah I think that it has to do with the bootloader, but a broken usb port is also a common problem.
I still have warranty so I will just let Vodafone repair it.
If my pc still doesn't recognize it after that, then I'm screwed.
Gepstra said:
Yeah I think that it has to do with the bootloader, but a broken usb port is also a common problem.
I still have warranty so I will just let Vodafone repair it.
If my pc still doesn't recognize it after that, then I'm screwed.
Click to expand...
Click to collapse
Ok but if it is a bootloader problem, we should not be the only ones having that problem.
I do not think I can send my phone to repair, since I am abroad for another few months.
Schindler33 said:
Ok but if it is a bootloader problem, we should not be the only ones having that problem.
I do not think I can send my phone to repair, since I am abroad for another few months.
Click to expand...
Click to collapse
Correct, I have searched the whole internet and there are some others with the same problem with the bootloader, but they can connect their phone and install the drivers I guess. I have tried everything regarding new drivers and such so I reckon that my usb port is broken.
Gepstra said:
Correct, I have searched the whole internet and there are some others with the same problem with the bootloader, but they can connect their phone and install the drivers I guess. I have tried everything regarding new drivers and such so I reckon that my usb port is broken.
Click to expand...
Click to collapse
Ok. So i think mine is broken aswell. I tried everything with the drivers, but my pc just says: USB device not recognized. Have you tried cleaning the port?
Schindler33 said:
Ok. So i think mine is broken aswell. I tried everything with the drivers, but my pc just says: USB device not recognized. Have you tried cleaning the port?
Click to expand...
Click to collapse
No I haven't tried cleaning it, do you know how to do that?
And yes my pc says exactly the same.
It's really weird.
I've tried it on three different computers (All Windows 7 though)
But it used to work on all three (except for when my desktop USB-ports ****ed themselves up)
I'm beginning to believe the outlet in which the USB cable goes into might be damaged.
I'm about to flash full Stock firmware, cause that's the last time I remember it working (like 3 months ago), and see if it works.
Any other tips?
Currently on WanamLite 11.4, and been flashing back and forward to Cyanogenmod using CWM flashables.
Clean phones USB port first
Second install USB drivers .
jje
Tried installing latest stock LPD firmware, still doesnt work.
Also tried "cleaning" the USB..
Phone must be broken..
**** I cant be bothered with this ****!
I suppose I'll have to wipe every trace of any flashing and send back to Samsung
dyallo said:
Tried installing latest stock LPD firmware, still doesnt work.
Also tried "cleaning" the USB..
Phone must be broken..
**** I cant be bothered with this ****!
Click to expand...
Click to collapse
Fifty dollars buys your phone ??
jje
Ty but no ty :]
There is a USB issue on CM9. Mine doesn't work either. Hope they fix it soon.
Sent from my Xperia Arc using XDA
Okay, won't help me any at all now though.
I flashed stock, lost root (i'm so stupid) and now since I can't connect the phone to my computer, I can't get CWM back to restore my backup.
dyallo said:
Okay, won't help me any at all now though.
I flashed stock, lost root (i'm so stupid) and now since I can't connect the phone to my computer, I can't get CWM back to restore my backup.
Click to expand...
Click to collapse
Seems a bit weird, have you tried using another cable?
I almost bricked my phone once because of a damaged cable...
Cheers,
Stefan.
Try cleaning the contacts between the battery and your phone.
Did you fix your problem?
If not, what exactly happens when you plug it in to your computer?
If "something" at all happens, then you may just need to switch the internal USB switch to use PDA and not MODEM in the PhoneUtils hidden menu. Make sure both USB and UART is set to use PDA!
Dial: *#*#7284#*#*.
did u try to erase kies and install only driver?
E:V:A said:
Did you fix your problem?
If not, what exactly happens when you plug it in to your computer?
If "something" at all happens, then you may just need to switch the internal USB switch to use PDA and not MODEM in the PhoneUtils hidden menu. Make sure both USB and UART is set to use PDA!
Dial: *#*#7284#*#*.
Click to expand...
Click to collapse
UART was set to Modem.
I'll try again after I find my god damn USB-cord
I have been in vacation for a week and when today i turned back home i wish to transfer the photos into the PC, but my phone can't be recognized by my pc or other's. Even in download mode, MTP, USB mass storage...please give me some help!
I'm on Cyanogen Mod 9.1.0 with stock kernel!
Sorry for the bad english friends!
Does the phone charge when connected via USB?
If not: your USB connector might be broken.
If yes: did you change anything on the phone since it last worked?
The phone charge with USB cable and even with the original charger.
The connector is working with other phones. I thing something is broken...not software issue i think.
sorcio91 said:
The phone charge with USB cable and even with the original charger.
The connector is working with other phones. I thing something is broken...not software issue i think.
Click to expand...
Click to collapse
try cleaning the microusb port of your phone with tooth brush
Might be silly, but have you installed the driver for the phone? Try reinstalling them by installing Kies.
Sent from my GT-I9100 using Tapatalk 2
Spiralzz said:
Might be silly, but have you installed the driver for the phone? Try reinstalling them by installing Kies.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I tried with 2 computers...
Jokesy said:
try cleaning the microusb port of your phone with tooth brush
Click to expand...
Click to collapse
I will try this, i have also tried a "electric contact cleaner" in spray, but no way.
The only way is to send it to Samsung, but i'm on CM 9 and since the phone is not recognized in download mode, i should flash the original firmware with mobile odin, am i right? It will be all right for the warranty?
sorcio91 said:
The only way is to send it to Samsung, but i'm on CM 9 and since the phone is not recognized in download mode, i should flash the original firmware with mobile odin, am i right? It will be all right for the warranty?
Click to expand...
Click to collapse
Try any of these combinations:
1. Ensure you have kies is up to date.
2. In Device Manager - uninstall driver (!) & then reinstall.
3. In Control Panel - click on troubleshoot, hardware and sound, configure a device.
Option 2 worked for me.
Ok ,so heres my problem:
My S3 (i9300) wont connect to my computer which is running windows 7. I plug it in, and there is no sound for a device connected, no confirmation, and all the gs3 does is charge. it doesnt even show the little usb symbol at the top on the status bar. i've also tried two different cables, two computers, and ive cleaned the usb port on the phone.
This is all pretty recent as well. it used to connect fine on stock and the same on cm9, but one day when i plugged it in, it said unrecognized device, and from then on, the computer doesnt even know its connected anymore. i restored back to my original stock backup that had worked fine before, but still no progress. Kies has been uninstalled and reinstalled multiple times and so have the drivers for samsung phones..
Download, extract and install, then try again
Sent from my GT-I9300 using xda premium
---------- Post added at 03:07 PM ---------- Previous post was at 03:06 PM ----------
http://db.tt/TSzlg0lI
Sent from my GT-I9300 using xda premium
Nope, no luck
Sent from my GT-I9300 using xda app-developers app
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
SPLucas26 said:
Does anyone else have any input or ideas? I'd really like to solve this...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
da.trute said:
going to be a driver issue if it charges, install KIES first as that provides the necessary samsung drivers too. If this doesnt work then uninstall the USB controller you phone is connected to, unplug the phone and reboot. Leave the phone out and install KIES again.The try again.
Could be your cable too though, have you swap tested anything yet, does a different cable work or does the cable work ok in another PC?
Click to expand...
Click to collapse
I'm reinstalling KIES right now and ill try it with two different usb cables. If neither work, then ill try uninstalling the usb controller as you said and then go through the process once more. ill get back to you on it all when I'm done.
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Simonetti2011 said:
I have a few no-brand, cheap microUSB cables that allow only for charging the phones: they don't let me get a data connection between the phone (or whatever) and the PC.
Other USB cables work ok, so I know the problem is not with the phone.
You don't need (and shouldn't) install KIES only because of the drivers.
The only drivers you should install from the only trusted source are these:
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
since this option is really quick to try, ill do that right now.
As for the cable I'm using, the one that I've been trying the most is the one that would work before i started having these issues. The other cable that i have is the one that came with my phone.
leeznon said:
I had the same problem.
I tried EVERYTHING. I did tons of research and tried them all, nothing worked.
I fixed my problem by sending my phone in and getting it fixed. I think they replaced the hardware.
Your phone is likely having a hardware issue, get it sent in, this is the only way.
Click to expand...
Click to collapse
The only problems with that are: 1) My phone is rooted and 2) That might take a while... what im bascially trying to do now is get it to work with my pc so that i have the possibility of unrooting and putting my music on it directly through the cable, rather than removing my microsd and having to put that into an sd adapter.
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
mmurphmsu said:
I'm having the same issue with my AT&T version. I have CM10 installed. I flash back to stock via Odin and I can get it to work, but as soon as I flash back to CM10 after rooting it won't connect.
Click to expand...
Click to collapse
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
SPLucas26 said:
Did you flash back to the stock that the phone came with? I'm currently on a nandroid backup of my stock software that's rooted and I know as a fact did work at one point in time, but for some reason just refuses to connect to my pc.
Click to expand...
Click to collapse
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
I had the same problem before, I used a different charger and it worked.. idk what it was
Well right now I am on Stock TW that is rooted and I can get into my phone via Windows Explorer. But if I was to put Clock work Mod back on it seems to not want to connect anymore. So it seems CWM is doing something weird.
I'm gonna install TWRP instead of CWM and see if that makes a difference.
mmurphmsu said:
No I am flashing to a stock rooted touchwiz and I can connect to my phone when its done. When it reboots it goes into a loop so I have to reboot it and wipe data/factory reset, then reboot. When it comes back on it still won't connect, so then I reflash stock root again using Odin and it comes back with USB connection working. I think some files are getting corrupt on the phone when flashing to CM10.
Click to expand...
Click to collapse
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
SPLucas26 said:
I think that this could be what's happening. When I restore to my rooted touchwiz, all I do is restore and that's it. Could you explain exactly what you do to get it working again? I'm a bit of a noob so I just need it explained a little simpler.
Click to expand...
Click to collapse
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
mmurphmsu said:
Look for the rooted image for your phone for stock. Put your phone in download mode and use Odin to reflash it back to stock not a restore. Use this site for help: http://galaxys3root.com/category/galaxy-s3-unroot/
Its worked for me every time. You may have to flash it twice with Odin to get it to work, that's what I usually have to do.
Click to expand...
Click to collapse
My issue ended up being an app I had installed, Triangle Away. I uninstalled and rebooted and had my USB connection back.
Well, so far, all I've gotten it a "usb cable connected" notification when trying yet another cable. Although i got this notfication, i still couldnt see any of the files on it from my pc, so it basically wasn't really connected. Im not sure what to do from here.
My ultimate goal would be to be able to unroot it so that if i needed to send it in or whatever, then i could without worry. As a side question, is there anyway to unroot it without a pc?
how i want to fix this matter ? help me guys. " Firmware upgrade encountered an issue. Please select recovery mode in kies and try again. " my screen S2 appear this. all time. i cant go anywhere. when i unplug usb cable it blank. cant on. after i plug in usb cable, it appear this. pc cant recognize this driver " OMAP4430 ". im death. please help me.
What have you done dude
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kind of help plss.
llrzall said:
kind of help plss.
Click to expand...
Click to collapse
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
kunterk said:
What have you done dude
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
kunterk said:
Seriously, what have you done until you get this screen? I might can share with you something if I know exactly what happened.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
llrzall said:
actually i want update new ROM at download mode, suddenly it hang at odin on PC. i off my phone. then when i on back, it appear that sign, how?
Click to expand...
Click to collapse
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Make sure you are flashing the right ROM for your device.........
kunterk said:
Well, I have this experience while flashing my friend's phone and here what I've done:
-reboot my computer
-connect the phone, kill all kies related process (I'm using Windows) and start odin. If odin recognise your phone at this point, you are good to go else you might want to reinstall usb drivers.
-use full wipe odin files I found from internet (I got from the pirate bay with search key ics full wipe)
-got few files in that folder. Hope you know their function. Or you can ask here.
Hope this helps.
edit: you also can try to plug into different usb port that have different usb controller
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
A similar kind of thing happened to my phone as well when I was upgrading to 4.0.4 from gingerbread via Kies. The installation got stuck when the phone was in the download mode and I had no other option than to disconnect. But yours got stuck while using Odin. I would suggest you to flash the firmware again. I hope your phone goes into download mode now. As for the drivers, uninstall everything related to samsung from your PC and then reinstall it. DO NOT UPGRADE SAMSUNG KIES IF IT ASKS YOU TO DO SO! AS I TOLD YOU A SIMILAR THING HAPPENED TO MY PHONE. MY PC COULD'NT RECOGNIZE IT AND I REINSTALLED EVEYTHING AND IT FINALLY SHOWED SOME SIGN. MAKE SURE YOUR ANTIVIRUS IS FULLY DEACTIVATED WHILE YOU EXECUTE THE FLASHING OPERATION!
leech4 said:
If Odin adds and removes quickly, this looks like your USB cable is dead, try flashing with another - Genuine- one
I had a similar issue while flashing my former SGS1: flashing process interrupted suddenly at 50%
Click to expand...
Click to collapse
make senses. but genuine won't make any different, all micro usb cable are the same. i'm using my old Nokia micro usb cable now, and just works fine
llrzall said:
how i want to fix it? went i plug a usb, it still added n remove, after a sec it do a same situasion, added n remove. i already reinstall usb driver using offical software at samsung. still cant recognize my usb.
Click to expand...
Click to collapse
first of all, while your phone is disconnected from USB cable, can you enter download mode?if no, then try to find someone that have JIG. else, as leech4 said, this might caused by your USB cable. OR might caused by your USB port of your PC. as i said earlier, try to repair your USB driver (not sammy USB driver, but your PC's usb driver). flash using ODIN, and kill kies services from task manager as kies will conflict with ODIN later. here i give you LSJ link(thanks to ApriliaM3) in case you don't have. extract the zip and use all the PDA, PHONE and CSC file. you can even use PIT to re-partition your system. (tested and proven to be working). good luck mate.:good:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
TheATHEiST said:
Talk to Samsung not us.
Next time do some research into your model and info on how to flash it properley before jumping in and screwing your device up.
Click to expand...
Click to collapse
LOL. its ur phone? no rite. learn from mistake, make me perfect next time.
llrzall said:
I already uninstall all usb driver , and install back, it still cant work. my hf will restart every 5 sec. that why i cant connect properly. any suggestion ?
Click to expand...
Click to collapse
Wow, I suspect this kind of brick or what so ever others called it. I've read some where, and they talking about JIG. If what they mean is the same like what I understood from my electronic knowledge, then you have to find someone that have JIG to do further troubleshooting directly from your board, not via usb. Well, I'm just saying. You might want to seek for other solution first since it's your device.
Cheers
Sent from my GT-I9100 using xda app-developers app