Related
Good
Searching the internet I came here to change the rom of my phone, use the hard reset and did not have any problem in the process, then asks me to restart the phone, restarted, and when a screen turns white and does not come out of it, no more than anything.
I'm a little desperate now, I know there is a high-value mobile but it cost me to raise the money to buy it, I hope you have a solution and can help me.
From already thank you very much
PS: sorry for my bad English, I am South American
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
warlordxxx said:
Sounds like you flashed and incompatable ROM or didn't use hard_spl either way go over to the htc official website - click support find your device and it will list some stock ROMs download an official ROM using the S/N from underneath the battery - Make sure the battery has plenty of charge - plug into your PC and load the stock htc ROM file this should take you through all the standard ROM flash info and will then flash the stock ROM onto your device. Hopefully this will flash back to stock for you and no more white screen.
Good luck and let us know how it went
Click to expand...
Click to collapse
good
I think that what you say is only for original phone htc diamond 2, since according to official rom I read are for the real htc diamond 2.
The mine is not original, as it says is a Chinese clone t5388i, please follow the screen in white, would greatly appreciate if someone helps me out of this problem is quite afflicted.
Again sorry for my bad English
sorry missed the clone bit on your topic . I don't have a clone myself so no ideas if the hard reset works. Might be a good idea to post which ROM you flashed to it
good day
the mobile screen just stayed white and does not know how I can flash now, there will be someone who has been the same and have a solution? I appreciate it, I would be very helpful.
Greetings
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Eer said:
HTC_NEW, please check this topic. It's dedicated to the clone phones (except the T5388++ who has it's own topic)
There is a tool called k3AID available who could help you. It's posted in that topic about 50 posts ago. I have a copy if you need it.
There is also another possibility to do a blind flash. This means the screen is not working but the phone can still be flashed. First thing is get the correct firmware for your phone because each time you flash the phone can get bricked / defect.
If my feedback helps you to solve your problem, please give me a thanks on the post.
Click to expand...
Click to collapse
hello friend
Reading that topic and searching for the tool by
internet gave me great hope, many users
have managed to solve the same problem, as no
I have a good English I can not understand how it's done
the process, did you guys could help me with a small
tutorial on how to fix my phone with that program?
I enter the program is that you give to download mode and
then I get 'EU entry Not calibration mode! (Mode =
0x00) 'and then does nothing else, I hope I can
help, thanks from now!
hello
I finally entered the discharge mode and while carrying on the idt went for something to eat when I returned I showed up he was 100% complete, the phone went off and did not catch more! Does anyone know it could happen? Is there any way to restart?
please help
K3 AID program
reeprich said:
OK - I can summarize my experiencies:
IDT flash... I think everybody who is doing this experiments have this software...
K3AID... h++p://www.ulozto.cz/6556122/k3firstaid-exe
can switch phone to "download" state even if the HW keys are not working
it suppose working ActiveSync connection (downloaded from mobileuncle com) not my own sw...
Sometimes may be a bit dificult to get K3AID working.. it can show some error message like "RTM state Error" - You need to install h++p://www.ulozto.cz/6556123/cabviaactivesync-1-5-setup-exe
and h++p://www.ulozto.cz/6556124/gb-ppc-2-1-3-20090929-cab
it is only summarize of my experiences - none of this utility is mine, so use it on your own risk
Click to expand...
Click to collapse
@HTC_NEW: Did you do the following steps according to reeprich instructions? What was the end result?
I did read that you used the calibration menu but I expect that you should use the download firmware menu. Is that available? ( I had the software installed but my virus scanner complained that there is a virus in the tmp file...) What's more important if your phone does not work anymore... Please be aware that this is a possible virus.
Removing the battery for a couple of minutes can help for restarting the phone.
htc new
I have done the same thing with my t5388i clone from china.
I tryed to flah the ROM and now I have the white screen.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Did you get your phone working back ?
Now i´m trying to use other ROM´s , but until now no success.
I used the SOLONOMI t5388i rom, and now it is BRICK - white screen.
Hi,
I had the same problem.
I used the rom postet from parabellum20000 (post # 1354) in this thread:
http://forum.xda-developers.com/showthread.php?p=8573304&highlight=Electronic+star#post8573304
parabellum20000 said:
Electronic star finally sent me (what they claim to be) SD ROM for t5388i. (99.3MB) I personally do not want to verify if it is truth, I am the one fortunate owner of perfectly (in some degree) working phone. Please feel free to use it on your own risk and share results if possible.
http://www.mediafire.com/?ymgvo8bf2t3v4c5
P.S.Please remember, flashing your phone with a wrong ROM is the safest way to brick (damage) it. So do not do it if it isn’t really necessary!
Click to expand...
Click to collapse
I hope this rom helps you to alive your phones again.
Cheers
5290
hello everybody i'm sorry to waste your times but i have a problem with my galaxy s2
I rooted the phone then installed rom for it but it stopped working in any mode (dead phone) i can't even go to downloading mode or recovery mode it just stopped
your advise will help a lot so please
Sounds like your device is bricked. How did this happen? Was the rom for your device? Was the flashing successful?
i don't know but what can i do to make it boot or work
because in this case i can't work on it or is there any way to work on it even if it is off please give me any advise i can do it so that maybe one of it will work
mr.nothing said:
i don't know but what can i do to make it boot or work
because in this case i can't work on it or is there any way to work on it even if it is off please give me any advise i can do it so that maybe one of it will work
Click to expand...
Click to collapse
Answer my questions from my previous post so that I can help you.
firstly i started with rooting and it goes well
secondly i started in the rom (it was the biggest mistake in my life) i have done it by downloading the room in my phone then install it via recovery mode
after this the phone stopped in the "yellow triangle" and didn't work..
after that i tried to install the root again and it didn't work so i done the second mistake by shutting down the phone by using power button and after that my phone dead...
so sad man...
Since you can't go into recovery mode (or any other), there is nothing more you can do. If your device is under warranty, then you know what they say.. "Drown your device" Make sure it's completely dead. If they ask, then just say it fell in a river, lake, toilet or something. If you do this, you can carry it back for your warranty (and get a new device ). Just make sure you do not tell them that you rooted your device (or even tried).
Hello
I wanted flash the rom of my atrix Orange France, with France rom retail,
The Atrix is soft brick
Unable to launch rsd mode or ...
When I pressed the button down one sees displayed nv flash and the phone turn off
If I press the top button, it starts in fastboot
What should I do.
thank you
PS : Sorry for my English
do you have experience with fastboot.
This worked for me in a similar sounding softbrick. http://forum.xda-developers.com/showthread.php?t=1182871 Check to make sure that this applies to your situation first though.
I was at the beginning of a stock rom 2.3.4 orange Fr.
I erase the rom and put a rom 2.3.4 fr.
The phone has never been amended (unlock, costum rom, root...)
bonez565 said:
This worked for me in a similar sounding softbrick. http://forum.xda-developers.com/showthread.php?t=1182871 Check to make sure that this applies to your situation first though.
Click to expand...
Click to collapse
Its not working :/
I made a video to show the problem
http // www youtube com / watch?v=HlSP6odb_Ro
Is it nv flash? If so it is currently unfixable. Here is a quote from a recent thread that I posted.
Erebus671 said:
okay, I am seeing this alot, but everyone else unit seems to shut off before anything can happen, mine does not, it simply stays on. That being said, I am conducting an experiment, since my ATRIX was afflicted I baught a new one because I liked the webtop idea, so im charging my new one to 100% and then im going to swap out batteries and check the results. Has anyone seen any evidence at all that might suggest a possible fix? I will update you guys on the results of my experiment once completed, hopefully I can come across something that will lead someone to a fix if not find one myself.
Click to expand...
Click to collapse
i just updated to Neutrino v2.5p2 and now atrix justs goes in boot loop, any help would be great! thanks
tried entering fastboot and recovery and nothing.
This is actively being discussed in the Neutrino thread. Try reading up on the current release (the "Search" feature does work) before starting new threads.
http://forum.xda-developers.com/search.php?searchid=3092113
http://forum.xda-developers.com/search.php?searchid=3092272
kingjetorl said:
i just updated to Neutrino v2.5p2 and now atrix justs goes in boot loop, any help would be great! thanks
tried entering fastboot and recovery and nothing.
Click to expand...
Click to collapse
I check all threads and nothing works! If I select anything like recovery, fastboot, rsd the screen dims and goes blank and becomes unresponsive, so stuck in this bootloop and now batttery is dead and does not charge.
I an willing to donate for any 1 on 1 help as this seems to be over my head.
Thank u
I have put my atrix in a bootloop with the latest update of Neutrino ROM V2.5p2. I am kinda still a newbie. I have read and read with no clear solution that I can comprehend. This situation is over my head. I read allot of posts and wanted to ask u or anybogy could point me to the right person to help. I am looking at shipping my phone to someone who can get me out of this bootloop. THis is the only way I think to get my atrix back. Tried a few local repair shops in the Orlando area where I live and the are clueless! I know this might sound odd but trust top guys on here and I am at my wits end. What I can do in return is send a paypal payment or anything u would want for this. Please take this in consideration or point me to someone who could. Thank you for your time!
James
This is what I have done till this point,
As I said I am kindda newbie who bit of more then I could chew!
First off after continuous boot loop at moto screen. I hold vol down and android recovery says starting the goes blank and unresponsive. next fastboot says battery to low to flash as battery not charging in this mode and that's a whole different problem now! Lastly I hit vol up to rsd mode and also says battery to low to flash.
I would like to send my phone to you or a senior member as I fell they can be trusted with my atrix. any recovery at this time would be fine, stock or new rom. Willing to pay shipping and time for there service. Please help
Rooted my Pantech Pocket with SuperOneClick so I could remove the bloatware. Happily used it for over a year. Decided to give it to a friend to use - so I did a factory reset. BIG MISTAKE. It can make calls out, it can send and receive texts, it has data (once I updated the APN) BUT all calls go to voicemail, the home button doesn't work (it works to put it in recovery mode but not anywhere else) the swipe notification bar at the top doesn't work and the contact book crashes. I spent the entire weekend looking for a fix. Can anyone direct me to a flashable kernel for this phone??
shopdelilah said:
Rooted my Pantech Pocket with SuperOneClick so I could remove the bloatware. Happily used it for over a year. Decided to give it to a friend to use - so I did a factory reset. BIG MISTAKE. It can make calls out, it can send and receive texts, it has data (once I updated the APN) BUT all calls go to voicemail, the home button doesn't work (it works to put it in recovery mode but not anywhere else) the swipe notification bar at the top doesn't work and the contact book crashes. I spent the entire weekend looking for a fix. Can anyone direct me to a flashable kernel for this phone??
Click to expand...
Click to collapse
anyone? I am desperate...
Find a solution?
shopdelilah said:
anyone? I am desperate...
Click to expand...
Click to collapse
Any Solution to this yet? I tried e-mailing pantech in which I got a response in one day "WOW" however it was basically a blow off because I specifically asked for a firmware BIN/PDL file to restore it using a special download tool I found on another forum that works on the P9070 Burst, and it will work on the P9060 Pocket, recognizes it in Software/Download mode and even lists the currant baseband version as JRUS09262011, however they would not give me the ROM and only would only provide instructions on how to restore this piece of crap, so now nobody can call me!!!! SUCKS!!!!
DaveNavy said:
Any Solution to this yet? I tried e-mailing pantech in which I got a response in one day "WOW" however it was basically a blow off because I specifically asked for a firmware BIN/PDL file to restore it using a special download tool I found on another forum that works on the P9070 Burst, and it will work on the P9060 Pocket, recognizes it in Software/Download mode and even lists the currant baseband version as JRUS09262011, however they would not give me the ROM and only would only provide instructions on how to restore this piece of crap, so now nobody can call me!!!! SUCKS!!!!
Click to expand...
Click to collapse
Pantech wouldn't help me either, they told me to go to an AT&T store. When I told them I'm a prepaid customer, they blew me off. Last Pantech I'll ever purchase!
What's the special download tool? Please share!
shopdelilah said:
Pantech wouldn't help me either, they told me to go to an AT&T store. When I told them I'm a prepaid customer, they blew me off. Last Pantech I'll ever purchase!
What's the special download tool? Please share!
Click to expand...
Click to collapse
Its actial called the P9070 Upload tool I found it on another site its warez s I cannot link it but google is your friend, if you can get a PDL. for the P9060 you can use the Upload tool to reflash your firmware its like an Odin type thing but for pantech....Trouble is no P9060 Firmware just a non flashable kernel, which is of no use, god I wish someone would dissect one of the Element or Burst Upgrade EXE's and rebuild them with The Pockets device ID and Firmware so it could be re-flashed old school htc style. Ths Forum used to be awesome for that type of stuff way back when.
UPDATE...Was issued a Service Ticket # and told to mail the phone in with my receipt,
Here is the Info to get your phone "Reflashed"
Welcome to the Pantech Mobile Phone Repair Service Portal!
This site will allow you to send your Pantech Mobile Device to the Pantech Authorized Repair Center for service. We understand that your investment in a mobile device is important to you which is why we offer both in and out of warranty repair service for your Pantech mobile device.
If your device is in warranty we will repair and return to you, the customer according to the quality standards of Pantech free of charge.
If your device is out of warranty we can repair and return for a flat service fee plus parts cost according to the quality standards of Pantech.
Service fee for all phones- $39.00
Service fee for tablets- $49.00
Parts cost is variable depending on the parts needed for repair.
If you choose not to have the phone repaired or it is deemed unrepairable it will be returned to you unrepaired. Service fees are non-refundable due to the phone being unrepairable.
It is important to note that some devices can be repaired via a software update or even resetting the handset to the original settings. We encourage you to try this option first. You can review a complete listing of recommended troubleshooting methods at http://www.pantechusa.com/site/troubleshooting/
Please click “Sign Up” to create your RMA for your Pantech device. By creating the RMA you may be provided proactive communications through the process (via email). It is important that you have the device with you while creating the RMA to provide accurate information.
Please look over the Frequently Asked Questions on the FAQ page if you are having trouble with your return.
Contact us:
FINETECHWIN
Customer support- 1-469-484-6610
Monday – Friday 9:00am to 6:00 pm (CST)
Customer support email- [email protected]
*UPDATE...Friday April 12th
Phone has been re-flashed and sent back to me VIA UPS Ground, They Fixed it !!!! YES!!!!! I should get it Monday, Sure would rock if it magically had ICS on it...I'LL try not to get my hopes up LOL!!!
*UPDATE Monday April 15th
Received the phone back from repair center, everything worked great accept for no recovery backup on the phone had to send back to have device re-flashed, simple user error but they do and and in fact can have the firmware to fix the phone.
need the help
yeah i know this is a old thread that i am bumping...but i cannot make my own threads and i am having the same issues as the op is.....sending it to pantech or ATT is not a option.....what i am thinking is i have either A} reflash the firmware if there is such a copy out there or B} i need to reinstall all the preloaded apps from before as not even the lock screen will come up and trying to put it into usb mode to swap files via usb cable is not working
Interested as well...
I just got a pantech pocket and everything is fine, but I want to make a proper backup just as basic due diligence.
If it literally cannot be done I'll be selling this phone before something breaks while it still has value.
TLR
How do I image this thing for if an when I break something?
Hi there.
Im just do a factory reset and the phone get stuck in the AT&T logo, can you give a copy of your rom or something that can help me please?
nurphya said:
Hi there.
Im just do a factory reset and the phone get stuck in the AT&T logo, can you give a copy of your rom or something that can help me please?
Click to expand...
Click to collapse
That's the trouble, I don't even know how to make an image in the first place.
There are no custom recoveries for this phone.
I am in another thread trying to get nandroid online to work in an effort to make said image.
shopdelilah said:
Rooted my Pantech Pocket with SuperOneClick so I could remove the bloatware. Happily used it for over a year. Decided to give it to a friend to use - so I did a factory reset. BIG MISTAKE. It can make calls out, it can send and receive texts, it has data (once I updated the APN) BUT all calls go to voicemail, the home button doesn't work (it works to put it in recovery mode but not anywhere else) the swipe notification bar at the top doesn't work and the contact book crashes. I spent the entire weekend looking for a fix. Can anyone direct me to a flashable kernel for this phone??
Click to expand...
Click to collapse
http://opensource.pantech.com/model/result.asp?SEQ=1162
Already do it for you. Use nandroid or cwm http://forum.xda-developers.com/showthread.php?p=43639973
anyone have a rooted p9060?
Could someone do me a favor?
If you have a rooted Pantech Pocket...
go to the system/apps folder and copy all the apk files and post them or send them to me?
I'm missing a couple
kernel zip?
someone please help :/
I used to be really sharp with this kind of stuff, but I had a MAJOR head injury and this stuff is overwhelming now. (I was in a car wreck, hit my head on the steel of the steering wheel and I woke up a day and a half later and couldn't remember where TF I lived)
(yes I searched the forum and google failed me too)
Will some good samaritan point me in the right direction? I have the kernel.zip for the p9060 but have no clue what to do with it!? Tried oden and it won't recognize the p9060 unless it's the older 1.83 or 1.85 version but I still can't get it to re-flash...
how do I use the kernel.zip to re-flash the stock OS (or can I?)
not much attention is paid to the Pocket it seems...
It's been a slow but solid phone until now. even went swimming with me this summer and survived!
---------- Post added at 05:21 AM ---------- Previous post was at 05:16 AM ----------
I haven't found any recovery mod that will install for the Pocket.
so I've been stuck with the stock recovery...
how do I use the kernel.zip to recover in the stock recovery?
apps
blkbeer'd said:
Could someone do me a favor?
If you have a rooted Pantech Pocket...
go to the system/apps folder and copy all the apk files and post them or send them to me?
I'm missing a couple
Click to expand...
Click to collapse
Hi were you able to get a copy of the stock apps .apks? I also need them, thank you.
Reinstall Pantech Pocket P9060
jr1984 said:
Hi were you able to get a copy of the stock apps .apks? I also need them, thank you.
Click to expand...
Click to collapse
Hi, here is a method to reinstall stock rom. Is the only way i have founded.
Download all you need from this link:
drive.google.com/uc?id=0BxnJkZXlixiWYlczeW0wRnV5UGs&export=download (with https)
The instructions are in a doc file inside. They are in Vietnamese but if you use google translator you can understand all the process.
I hope it will help you.
Best Regards.
zigala said:
Hi, here is a method to reinstall stock rom. Is the only way i have founded.
Download all you need from this link:
drive.google.com/uc?id=0BxnJkZXlixiWYlczeW0wRnV5UGs&export=download (with https)
The instructions are in a doc file inside. They are in Vietnamese but if you use google translator you can understand all the process.
I hope it will help you.
Best Regards.
Click to expand...
Click to collapse
Thanks for the file. It appears that this phone is quite popular globally. I would like to give it to my younger children to play games on. I however have a problem in which the phone continually boots into recovery. No matter what is done, it keeps rebooting into recovery. Can any of these files be made into an update.zip to flash from an SD card. Is there possibly another way to get the phone out of this brick?
Thanks
I need a custom rom for my Pantech P9060? Thanks