Related
Hello all, I have the xv6800, dcd rom 3.3.4 and activesync and internet sharing setup on Windows just fine. However, I have recently gotten a MAC, and I have not been able to get the internet sharing to work via BT or USB. I can understand BT cause I was never able to get it set up on windows either. I don't mind the USB connection, it's alwasy been more stable and a snap to set up with the ROM. However I can't get it working on the MAC. Is there a driver or app that needs to be installed on the mac side? The only think I remember doing on the WIN side is installing the modem driver.
On Mac, I have installed Missing Sync installed and I have been able to attach and sync my winmo phone without issue, so I know I have connection. but I cannot get the internet sharing to work. I checked out the verizon site and they state that they do not make a modem driver for the mac os.
I should also mention that I have winXP set up on the mac thru VMware, but I have been unsuccessful getting this to work the way my original windows laptop is setup. I dont want to set it up that way anyway if I can avoid it.
I am curious if anyone has this working via USB?? I apologize if this has been covered elsewhere. I couldn't find anything related and certainly not specific to this ROM.
I did find this, http://www.keithtastic.com/post/3997...-to-sprint-htc, but it states to buy an app called USB Modem program from www.mobile-stream.com. but wouldnt the ISC app on the dcd rom provid the same functionality?
Thanks for any/all help
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
bmorrisj said:
i use BT in OSX... system prefs, bluetooth, setup a connection to the phone(+ button)... hit the bluetooth icon on the menubar, select the phone -> connect to network, thats all i have to do.
Click to expand...
Click to collapse
then just use internet sharing form the phone as normal?
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
goon55: Like you, I always used a VM workaround to tether back when I had a Mac. I haven't tried this, but I've heard Syncmate allows Internet Sharing on Mac systems. Good luck!
I have no issues connecting my macbook for my 6800.
After you set it up like the other poster told you to, you should have a phone icon next to the bluetooth icon at the top right of the screen. click the phone icon then "connect bluetooth".
goon55 said:
no offense but that didnt help at all. I can connect my phone via BT themac sees it, but all I can do is browse device. I need to set up a connection with my phone to the mac and get online via my phone. I dont careif its bluetooth or not. I have the new macbook btw, if it matters
Click to expand...
Click to collapse
also when setting up the BT relationship, make sure you select the network services (i believe, there are one or two services you can check)...on the phone make sure you start BT and internet sharing (with BT selected) and when you go to the BT menu on the mac, your phone name should be under "devices", expand your phone name and select connect to network.
just trying to clarify a bit.
i had it
i had bt working for a bit and then was disconnected abruptly.
after deleting the profiles of the pairings on both the titan and the mac, it still wont share the connection although the phone will be connected in bt system prefrence pane, (where you select devices).
when it worked, i would select the phone in the device select, and underneath clicking on the gear to a menu option to 'connect to network'
it worked that wayfor 3 mins.
also, when i configure the device, if i set the phone to internet share while the mac is discovering the services, i get two options to select instead of just one:
access the internet
use device as network port.
edit: got it, apple talk active
best software you can use is http://www.wmwifirouter.com/ it works over BT or wifi and uses your phone's regular data access address which means you don't get tethering charges. NOTE I use the free version, and I have tried the tiral and although it does work, my mogul does not seem to like it and has little quirks after I install it (wifi turns on when I reset even if the switch is off, I don't why but its there).
Hi everyone, I've been trying to use my Windows Mobile phone as a modem for the Macbook, but so far I only see people being able to connect via BT. Problem with that for me is that BT drains both my laptop and phone battery quicker, so I'm trying to find a solution to connect via USB instead. Has anyone been able to surf on their Mac using their Windows Mobile phone as a modem via USB cable?
What you want is Mobile Stream USB Modem for Windows. Windows here being Windows Mobile, it works with my Mac.
Once you set it up, your phone is seen as a USB Modem and you dial from the Mac to this port. There is a free trial, take time to test it, read the forums, I had some initial issues to get it work right, but now it is good, I ended up purchasing it.
Tried BT sharing too, but too instable and drops. Tried the WiFi sharing, but eats battery...
Only downside: as you dial the data modem, it will fail if it is already in use (background email checking on your phone...). I have to disconnect the data connection on the phone to be able to dial from the Mac, otherwise it reports Port Busy.
Thanks for the recommendation, will try it out. Any other solutions in the meantime to connect and share the Internet connection from my Windows Mobile phone to Mac via USB?
I had the same problem, and tried everything recommended in the thread - no dice. I ended up just installing WMWifiRouter and that works like a champ.
http://networkjew.com/2009/03/30/tether-windows-mobile-phone-mac/
This is for cingular, but I'm sure this can be attempted no matter what the provider.
I've been looking for a solution as well, and have yet to find one for USB Internet Sharing on a Mac. I currently just use Bluetooth with an external charger on the phone and laptop since it'll eat the battery of both quickly.
Hi! I have a problem regarding bluetooth transfer. I want to send files from Atrix to my laptop but it won't work even if it showed paired and connected to media. However, I can send files from my laptop to Atrix using bluetooth without a problem. Do i need to be rooted to do this?
No you shouldn't have to be rooted to transfer files via BT. Have you tried the Phone Portal app that came on the Atrix? Open the app and select "connect with wifi", in your computers browser enter the ip address shown on your phones screen. Thats it! You should now have access to the files on your Atrix via your web browser.
Thx.. somehow i fixed the bluetooth issue myself. and, using bluetooth to connect atrix to laptop is way faster than the phone portal one
Good you got it working! Its takes me about 20 seconds from opening the phone portal app to typing the ip in my browser, not bad. The advantage of phone portal over bt is the 'file explorer' - bt only allows transfers not exploring; with phone portal you can see the files/folders and thats a huge advantage to me.
I can also use bluetooth to explore my files on atrix also. Somehow opening the ip address is very slow for me
How do you do explorer over bt? Is it software on the computer or?
I downloaded the "bluetooth file transfer" from the market which enables FTP. Then i go to device manager and find my bluetooth card and enables the FTP in it. When I enabled tthe FTP, it will install a driver. Then go to control panel-> bluetooth devices-> MB860, press connect in the phone operations then "browse files on your phone" will show up. Then you just click it and then you can explore it.
I've searched around for some solid technique or, preferably, app that allows you to trick apps into thinking you are using Wifi when in reality you are still on 3g/4g.
- I am NOT looking for alternatives or workarounds for a specific app
I found it crazy that the iPhone has over a dozen apps, tweaks, etc that can easily do this type of thing, but the only stuff I've found on the subject for android were either ridiculous techniques that don't work, or people questioning WHY you'd want to do this...
If anyone has ANY information on this subject, please tell.
Is there a reason why this is so much harder on Android than on iPhone? I'd be happy to learn exactly what the problem is here.
bump
Im also interested on this. I have unlimited data and i find it ridiculous that devs make apps to only work on wifi. I use to use 3g unrestrictor all the time back when i had my iPhone.
bump
bump again...
Well i know this works with certain android games like zenonia and modern combat which require wifi not data connection so you can try it with other stuff. You have to be rooted.
The first step is to turn your Wi-Fi on and*download Android Wi-Fi tether app*available in Market.
Once you have the app downloaded, launch the app and go to Menu > Settings > Change > Setup Method and select Softap option.
Now start tethering and drag down the notification bar.
In case your Wi-Fi icon is still enabled, it means that you have done it right so far.
Do not press the Wi-Fi toggle icon and launch the game you want to play
-------------
I am a dishonest man, and you can always honestly trust a dishonest man to be dishonest. Honestly it's the honest ones you have to watch out for.
xMrArnoldx said:
Well i know this works with certain android games like zenonia and modern combat which require wifi not data connection so you can try it with other stuff. You have to be rooted.
The first step is to turn your Wi-Fi on and*download Android Wi-Fi tether app*available in Market.
Once you have the app downloaded, launch the app and go to Menu > Settings > Change > Setup Method and select Softap option.
Now start tethering and drag down the notification bar.
In case your Wi-Fi icon is still enabled, it means that you have done it right so far.
Do not press the Wi-Fi toggle icon and launch the game you want to play
-------------
I am a dishonest man, and you can always honestly trust a dishonest man to be dishonest. Honestly it's the honest ones you have to watch out for.
Click to expand...
Click to collapse
It didn't work.. My wifi is turned off as soon as the tethering starts. What app exactly am I supposed to use?
Thanks!
Try wifi tether for root users.
---------------------
Give me a thanks if i helped
Lg Lucid running Cm10
w/ Cm10 Kernel
Asus Tf700 running Cromi-X 4.6.5
w/ Max's v4 kernel
Some Android games and application require a Wi-Fi connection due to the large amount of data that they use. If you don't have Wi-Fi available, however, you won't be able to use the apps or play the games, even if you have a fast 3G connection. You can trick your phone into believing that the Wi-Fi is connected by saving a small text file to your SD card so the phone will play games and apps as if it's on Wi-Fi when it's only connected to 3G.
Things You'll Need
PC
Data cable
Text editing app
Instructions
1) Launch a text editing program on your computer and type "FALSE" in all caps. Save the file and give it the name "qaWifiOnlyMode.txt" exactly with all the lower-case and capital letters duplicated precisely, otherwise the Android operating system won't see the file. Close the text editing program.
2) Plug your Android device into your computer and drag your finger down from the top of the screen to open the notification area. Tap "USB Connected" and then confirm that you want to mount your SD card as a drive on the computer.
3) Find the qaWifiOnlyMode.txt file on your computer and click to select it. Press "Ctrl" and "C" to copy the file. Browse to the location of your Android device's SD card on your computer. In the base(root) directory, not in any sub-folder, press "Ctrl" and "V" to paste the text file to the card.
4) Drag down the notification area on your Android device and tap the USB connection to disconnect the device from the computer. Unplug the USB cable. Your device will now play games and apps as if it's on Wi-Fi even if it's only on 3G.
Diablo67 said:
Some Android games and application require a Wi-Fi connection due to the large amount of data that they use. If you don't have Wi-Fi available, however, you won't be able to use the apps or play the games, even if you have a fast 3G connection. You can trick your phone into believing that the Wi-Fi is connected by saving a small text file to your SD card so the phone will play games and apps as if it's on Wi-Fi when it's only connected to 3G.
Things You'll Need
PC
Data cable
Text editing app
Instructions
1) Launch a text editing program on your computer and type "FALSE" in all caps. Save the file and give it the name "qaWifiOnlyMode.txt" exactly with all the lower-case and capital letters duplicated precisely, otherwise the Android operating system won't see the file. Close the text editing program.
2) Plug your Android device into your computer and drag your finger down from the top of the screen to open the notification area. Tap "USB Connected" and then confirm that you want to mount your SD card as a drive on the computer.
3) Find the qaWifiOnlyMode.txt file on your computer and click to select it. Press "Ctrl" and "C" to copy the file. Browse to the location of your Android device's SD card on your computer. In the base(root) directory, not in any sub-folder, press "Ctrl" and "V" to paste the text file to the card.
4) Drag down the notification area on your Android device and tap the USB connection to disconnect the device from the computer. Unplug the USB cable. Your device will now play games and apps as if it's on Wi-Fi even if it's only on 3G.
Click to expand...
Click to collapse
Well, this whole text file thing didn't work for me. Do you have to be rooted for this to work?
It didn't work for me either and I'm rooted
Work for anyone
Did the above fix work for anyone?
.txt thing didn't work for me either and I'm rooted]
I am having a rooted phone with busybox and this text file trick doesn't work.
Sent from my GT-S5360 Gadget of Mass Destruction using xda-app
Using CWM........Busybox Commands........No I use my hands
I've been searching for a way to fool apps into thinking their on WiFi. No luck.
I hate to beat the dead horse but I switched from an iPhone to a HTC One and its turning out to be a bad deal. Your telling me all these yrs and no one has been able to make one of the most basic apps the iPhone can get via cydia yet.
We should start a bounty ...
I'll throw in 100 to start it off with.
omf05 said:
I've been searching for a way to fool apps into thinking their on WiFi. No luck.
I hate to beat the dead horse but I switched from an iPhone to a HTC One and its turning out to be a bad deal. Your telling me all these yrs and no one has been able to make one of the most basic apps the iPhone can get via cydia yet.
We should start a bounty ...
I'll throw in 100 to start it off with.
Click to expand...
Click to collapse
It's pretty pathetic really
I'll be abroad next week and wanted to catch a bit of the French Open Tennis but one of the TV apps I'm using requires a wifi connection. The fact there is no workaround yet is almost as idiotic as the morons who implement this "feature" in their apps.
Why should I care if someone is dumb enough to rinse their 1GB Data limit when I have unlimited 4G internet?
I asked about this in the Xposed forum, since it seems like an Xposed module might be the way to trick apps into thinking you're on wi-fi.
For me, the issue is with PdaNet+. I have unlimited data with T-Mobile, and I can pair my tablet via bluetooth and use my phone's data on my tablet. However, some apps don't work because they don't detect a data connection (ie: wi-fi), even though there is one. I can browse the internet. I can browse Google Play. But I can't download anything from Google Play, because it keeps waiting for a network connection. I can use Facebook, but I can't use the Facebook Messenger.
The work-around I can use at home is to use a virtual wi-fi router program on my laptop, connect my tablet to my laptop's wifi, and then connect my tablet via PdaNet+ bluetooth. Even there's no data going through the wi-fi, it still "tricks" my tablet into thinking there's a network connection, and it proceeds to download through bluetooth. Of course, this only works at home or if I have my laptop with me.
Yeah, I can always just tether my phone to my laptop and run my tablet off the laptop's virtual wi-fi router (which I typically do), but that's slower, and again, only works when my computer is with me.
Planterz said:
I asked about this in the Xposed forum, since it seems like an Xposed module might be the way to trick apps into thinking you're on wi-fi.
For me, the issue is with PdaNet+. I have unlimited data with T-Mobile, and I can pair my tablet via bluetooth and use my phone's data on my tablet. However, some apps don't work because they don't detect a data connection (ie: wi-fi), even though there is one. I can browse the internet. I can browse Google Play. But I can't download anything from Google Play, because it keeps waiting for a network connection. I can use Facebook, but I can't use the Facebook Messenger.
The work-around I can use at home is to use a virtual wi-fi router program on my laptop, connect my tablet to my laptop's wifi, and then connect my tablet via PdaNet+ bluetooth. Even there's no data going through the wi-fi, it still "tricks" my tablet into thinking there's a network connection, and it proceeds to download through bluetooth. Of course, this only works at home or if I have my laptop with me.
Yeah, I can always just tether my phone to my laptop and run my tablet off the laptop's virtual wi-fi router (which I typically do), but that's slower, and again, only works when my computer is with me.
Click to expand...
Click to collapse
Could you provide a little more detail in how to do this? What program are you using on your laptop? So the phone is running PDANet and then you connect it to your laptop via Bluetooth. Then after that you connect your tablet to the laptop's virtual wifi router?
Don't know if I understood completely but thanks in advance.
taino211 said:
Could you provide a little more detail in how to do this? What program are you using on your laptop? So the phone is running PDANet and then you connect it to your laptop via Bluetooth. Then after that you connect your tablet to the laptop's virtual wifi router?
Don't know if I understood completely but thanks in advance.
Click to expand...
Click to collapse
I have T-Mobile's Unlimited plan, which has unlimited data and 5gb free hotspot. My phone is a T-Mobile branded Samsung Galaxy Light SGH T399. On my phone I have PdaNet+ installed, with the full unlock key purchased ($8).
There's a free one to try, to make sure it works with your phone; whether it works or not depends on the phone itself, the version of Android it runs, and the provider from which you got it (if you didn't get an unlocked version). For example, a particular phone might work fine with T-Mobile, but the Sprint version of that phone might not. That's why there's the free version - to test before purchasing. The limitation with the free version is that it times out after about ~10 minutes and you have to reconnect.
PdaNet can connect to your computer in 3 ways. Wifi, Bluetooth, or USB tethering. Again, depending on your phone, carrier branding, and Android version, some methods may work while others won't.
Wifi works just like any wifi hotspot. However, depending on the afore mentioned conditions, wifi hotspot might not work the way you want it to. For example, on my T-Mobile branded Samsung Galaxy Light SGH-T399, using the wifi hotspot on PdaNet also loads up the pre-installed T-Mobile hotspot, which drains the 5gb mobile hotspot allotment. I haven't found a way to break that on this phone. On other phones (like Nexus devices), I know there are ways to only use your phone's data, and not the hotspot allotment, but frankly, these are very complicated and need a VPN subscription (ie: more money) to work. Wifi hotspot use is often broken anyway, depending on your carrier and Android version.
Bluetooth and USB tethering work differently than wi-fi, but otherwise work essentially the same way as each other. Both require a companion program to be installed onto your computer. A good idea is to keep a copy of this program on your phone, so you can install it on other people's computers if necessary (and perhaps the USB drivers for your phone as well).
I haven't messed around with Bluetooth much, because the Bluetooth on my laptop (via a dongle) is glitchy as $#@!, and I've never been able to get PdaNet to work with it properly except for a couple times which didn't last. Actually, I've never gotten anything to work properly with Bluetooth on my laptop, so this is probably just a problem with my computer/dongle/drivers, and YMMV. On the few times I've gotten PdaNet or other internet via Bluetooth (which some phones have built-in, and don't require PdaNet at all), speeds have been much, much slower, and I'd rather tether via USB anyway.
I connect my phone's internet to my laptop with USB tether. Make sure USB debugging is enabled, and plug it in. Make sure it's set as a Mass Storage device (4.1 or earlier), or as a Media Device (4.2+). Then on your phone, open PdaNet+ and Activate USB Tether (you can do this before plugging it in, it doesn't matter). On your computer, load PdaNet, and select Connect Internet (USB). If everything has been set up correctly, it should say "Connected", and you can now use your phone's internet on your computer.
Here's the important part:
If you don't have an Unlimited plan, tethering (via any method) will suck down your data. If you do have an unlimited plan, there's an option in PdaNet's settings (on your computer) to "Hide Tether Usage". This uses a proxy or VPN (not sure which) to fool your provider into thinking you're on your phone, and not on your computer. This works for me, with my phone, on T-Mobile. No guarantees that this will work with other phones, or other providers. Try the free version first, monitor your data usage (use your provider's account app, not the built-in Android one), and see if it works for you.
As for the virtual wifi network, there are a couple ways to do this. The PdaNet program for your computer actually has this built into it. Once you're connected, select the "WiFi Share" option, and it'll set up a wi-fi network that you (and others) can use on other devices, like other phones, tablets, computers smart-TVs, etc. Obviously, the computer you're tethered to needs to have wi-fi capability for this to work. But as long as you have a wi-fi modem, it can be turned into a wi-fi router with this option. It's not as strong as a real wi-fi router, but you don't have to buy and network a different piece of equipment either.
There are also stand-alone virtual wi-fi router programs. The one I've used mainly is Virtual Router Manager beta 0.9. A while ago, I tried a newer, non-beta version, but it was extremely unstable, so I went back to the 0.9 beta. I haven't tried any newer version in quite some time. I used this when I had proper internet (cable) in my apartment, but wanted to use wi-fi instead of my phone's data to do downloads or updates on my phone.
Neither the Virtual Router Manager or the WiFi Share option on PdaNet are 100% stable. Every once in a while, something glitches out, and I have to reboot my computer (I usually reboot my phone at the same time, just to be sure). But hey, apart from the $8 for PdaNet+, I get unlimited mobile and home internet for $80/month, so I can't complain.
To recap, I have my phone USB tethered to my laptop (which is plugged into a 42" HDTV) via PdaNet+. I use a virtual wi-fi router option to give wi-fi to my tablet. One internet connection, 3 devices connected.
My problem is that, even though I own a laptop, it practically never goes with my anywhere. It sits on a cooling pad, plugged into 2 external HDDs and my 42" HDTV, and I sit at my couch with a wireless mouse/keyboard. But when I'm away from my apartment, and I have my tablet, there's certain things I can't do on the tablet connected via PdaNet and Bluetooth, because it doesn't have a wi-fi connection, and these certain apps don't detect a network connection.
Planterz said:
I have T-Mobile's Unlimited plan, which has unlimited data and 5gb free hotspot. My phone is a T-Mobile branded Samsung Galaxy Light SGH T399. On my phone I have PdaNet+ installed, with the full unlock key purchased ($8).
There's a free one to try, to make sure it works with your phone; whether it works or not depends on the phone itself, the version of Android it runs, and the provider from which you got it (if you didn't get an unlocked version). For example, a particular phone might work fine with T-Mobile, but the Sprint version of that phone might not. That's why there's the free version - to test before purchasing. The limitation with the free version is that it times out after about ~10 minutes and you have to reconnect.
PdaNet can connect to your computer in 3 ways. Wifi, Bluetooth, or USB tethering. Again, depending on your phone, carrier branding, and Android version, some methods may work while others won't.
Wifi works just like any wifi hotspot. However, depending on the afore mentioned conditions, wifi hotspot might not work the way you want it to. For example, on my T-Mobile branded Samsung Galaxy Light SGH-T399, using the wifi hotspot on PdaNet also loads up the pre-installed T-Mobile hotspot, which drains the 5gb mobile hotspot allotment. I haven't found a way to break that on this phone. On other phones (like Nexus devices), I know there are ways to only use your phone's data, and not the hotspot allotment, but frankly, these are very complicated and need a VPN subscription (ie: more money) to work. Wifi hotspot use is often broken anyway, depending on your carrier and Android version.
Bluetooth and USB tethering work differently than wi-fi, but otherwise work essentially the same way as each other. Both require a companion program to be installed onto your computer. A good idea is to keep a copy of this program on your phone, so you can install it on other people's computers if necessary (and perhaps the USB drivers for your phone as well).
I haven't messed around with Bluetooth much, because the Bluetooth on my laptop (via a dongle) is glitchy as $#@!, and I've never been able to get PdaNet to work with it properly except for a couple times which didn't last. Actually, I've never gotten anything to work properly with Bluetooth on my laptop, so this is probably just a problem with my computer/dongle/drivers, and YMMV. On the few times I've gotten PdaNet or other internet via Bluetooth (which some phones have built-in, and don't require PdaNet at all), speeds have been much, much slower, and I'd rather tether via USB anyway.
I connect my phone's internet to my laptop with USB tether. Make sure USB debugging is enabled, and plug it in. Make sure it's set as a Mass Storage device (4.1 or earlier), or as a Media Device (4.2+). Then on your phone, open PdaNet+ and Activate USB Tether (you can do this before plugging it in, it doesn't matter). On your computer, load PdaNet, and select Connect Internet (USB). If everything has been set up correctly, it should say "Connected", and you can now use your phone's internet on your computer.
Here's the important part:
If you don't have an Unlimited plan, tethering (via any method) will suck down your data. If you do have an unlimited plan, there's an option in PdaNet's settings (on your computer) to "Hide Tether Usage". This uses a proxy or VPN (not sure which) to fool your provider into thinking you're on your phone, and not on your computer. This works for me, with my phone, on T-Mobile. No guarantees that this will work with other phones, or other providers. Try the free version first, monitor your data usage (use your provider's account app, not the built-in Android one), and see if it works for you.
As for the virtual wifi network, there are a couple ways to do this. The PdaNet program for your computer actually has this built into it. Once you're connected, select the "WiFi Share" option, and it'll set up a wi-fi network that you (and others) can use on other devices, like other phones, tablets, computers smart-TVs, etc. Obviously, the computer you're tethered to needs to have wi-fi capability for this to work. But as long as you have a wi-fi modem, it can be turned into a wi-fi router with this option. It's not as strong as a real wi-fi router, but you don't have to buy and network a different piece of equipment either.
There are also stand-alone virtual wi-fi router programs. The one I've used mainly is Virtual Router Manager beta 0.9. A while ago, I tried a newer, non-beta version, but it was extremely unstable, so I went back to the 0.9 beta. I haven't tried any newer version in quite some time. I used this when I had proper internet (cable) in my apartment, but wanted to use wi-fi instead of my phone's data to do downloads or updates on my phone.
Neither the Virtual Router Manager or the WiFi Share option on PdaNet are 100% stable. Every once in a while, something glitches out, and I have to reboot my computer (I usually reboot my phone at the same time, just to be sure). But hey, apart from the $8 for PdaNet+, I get unlimited mobile and home internet for $80/month, so I can't complain.
To recap, I have my phone USB tethered to my laptop (which is plugged into a 42" HDTV) via PdaNet+. I use a virtual wi-fi router option to give wi-fi to my tablet. One internet connection, 3 devices connected.
My problem is that, even though I own a laptop, it practically never goes with my anywhere. It sits on a cooling pad, plugged into 2 external HDDs and my 42" HDTV, and I sit at my couch with a wireless mouse/keyboard. But when I'm away from my apartment, and I have my tablet, there's certain things I can't do on the tablet connected via PdaNet and Bluetooth, because it doesn't have a wi-fi connection, and these certain apps don't detect a network connection.
Click to expand...
Click to collapse
Thanks for the great explanation! This helps quite a bit. I'll give this a shot to see how it goes.
Hi guys,
since I'm new to Sony Z* I don't actually know, what is the best way to transfer data to my internal/external sd cards?
I would like to not use cables to leave the docks closed.
So Bluetooth or Wifi would be the next options, while Bluetooth might be a bit slow for lage file transfers I guess.
So is there any easy way to transfer data between the Z2 and a pc ofer wifi? The best thing would be, if no third party software on the pc is required.
deepflash said:
Hi guys,
since I'm new to Sony Z* I don't actually know, what is the best way to transfer data to my internal/external sd cards?
I would like to not use cables to leave the docks closed.
So Bluetooth or Wifi would be the next options, while Bluetooth might be a bit slow for lage file transfers I guess.
So is there any easy way to transfer data between the Z2 and a pc ofer wifi? The best thing would be, if no third party software on the pc is required.
Click to expand...
Click to collapse
Try Airdroid, it's the best app AFAIK.
Note that because of a restriction introduced by Kitkat, wireless data transfer can not be done directly to the external SDcard. The Airdroid team is currently working to try to overcome this issue.
deepflash said:
Hi guys,
since I'm new to Sony Z* I don't actually know, what is the best way to transfer data to my internal/external sd cards?
I would like to not use cables to leave the docks closed.
So Bluetooth or Wifi would be the next options, while Bluetooth might be a bit slow for lage file transfers I guess.
So is there any easy way to transfer data between the Z2 and a pc ofer wifi? The best thing would be, if no third party software on the pc is required.
Click to expand...
Click to collapse
If you goto settings, Xperia Connectivity, USB Connectivity, you can pair your device with your computer (the phone will give you instructions), once the phone is paired with your computer you can simply goto the same menu, tap the name for your computer, and you will then be able to transfer files as if you had connected by USB in Media Transfer Mode all over wifi.
TheOnlyIntruder said:
If you goto settings, Xperia Connectivity, USB Connectivity, you can pair your device with your computer (the phone will give you instructions), once the phone is paired with your computer you can simply goto the same menu, tap the name for your computer, and you will then be able to transfer files as if you had connected by USB in Media Transfer Mode all over wifi.
Click to expand...
Click to collapse
I didn't notice this new feature, it works fine
Thanks!!
But a toggle would be great to enable the connection.
TheOnlyIntruder said:
If you goto settings, Xperia Connectivity, USB Connectivity, you can pair your device with your computer (the phone will give you instructions), once the phone is paired with your computer you can simply goto the same menu, tap the name for your computer, and you will then be able to transfer files as if you had connected by USB in Media Transfer Mode all over wifi.
Click to expand...
Click to collapse
That sounds very cool. How is the data transferred? Not all of my PCs have Bluetooth, so I'm hoping it's not via bluetooth...
EDIT: woops, should have read the last word...."over wifi"
TheOnlyIntruder said:
If you goto settings, Xperia Connectivity, USB Connectivity, you can pair your device with your computer (the phone will give you instructions), once the phone is paired with your computer you can simply goto the same menu, tap the name for your computer, and you will then be able to transfer files as if you had connected by USB in Media Transfer Mode all over wifi.
Click to expand...
Click to collapse
Thanks for mentioning. This will work great at my home I guess, but not at my office pc which is connected to a different wifi network.
I would have to open a Wifi Hotspot on my Z2 and let the PC connect to it to make it still work.
deepflash said:
Thanks for mentioning. This will work great at my home I guess, but not at my office pc which is connected to a different wifi network.
I would have to open a Wifi Hotspot on my Z2 and let the PC connect to it to make it still work.
Click to expand...
Click to collapse
I don't think it matters which network you join, since the pairing is based on the MAC address on each device (An example would be you could still pair with your home computer even if your computer was connected to a different network) unless you're not allowed to have your phone connect to your work's wifi?
TheOnlyIntruder said:
unless you're not allowed to have your phone connect to your work's wifi?
Click to expand...
Click to collapse
That's the point
unfortunately this doesn't seem to be working for me =/ it just says "connecting" for a long time, and then tells me it could not connect to the network. this is after the message saying the pairing is a success...
SexyIceCream said:
unfortunately this doesn't seem to be working for me =/ it just says "connecting" for a long time, and then tells me it could not connect to the network. this is after the message saying the pairing is a success...
Click to expand...
Click to collapse
This has happened to me too but usually happens if the phone has gone to sleep after it has been connected already, I also think stamina mode blocks the connection while the phone is in sleep. Try turning the wifi off (remember to disconnect from the PC first) and back on and then reconnect but ensure the screen stays on/phone stays awake, once you've done your tasks disconnect from the pc, otherwise it'll eventually as I like to say "forget it's connected while still reporting it is connected".
If it's still not working, try re-pairing and after repeating the above tasks and it's still not working, check your router configuration and/or your pc's network connection settings including any firewalls.
Thats about the best information I can offer really so if it doesn't work after all that I'm not sure what else that can be done.
TheOnlyIntruder said:
This has happened to me too but usually happens if the phone has gone to sleep after it has been connected already, I also think stamina mode blocks the connection while the phone is in sleep. Try turning the wifi off (remember to disconnect from the PC first) and back on and then reconnect but ensure the screen stays on/phone stays awake, once you've done your tasks disconnect from the pc, otherwise it'll eventually as I like to say "forget it's connected while still reporting it is connected".
If it's still not working, try re-pairing and after repeating the above tasks and it's still not working, check your router configuration and/or your pc's network connection settings including any firewalls.
Thats about the best information I can offer really so if it doesn't work after all that I'm not sure what else that can be done.
Click to expand...
Click to collapse
lol silly me. the pc was connected via the wire but not to the network(forgot about it since it's been on wired since the start)
thanks for the tip! :highfive:
SexyIceCream said:
lol silly me. the pc was connected via the wire but not to the network(forgot about it since it's been on wired since the start)
thanks for the tip! :highfive:
Click to expand...
Click to collapse
No problem, glad I helped
Does anyone know if this feature still works after rooting? I really like it and don't want to lose it!
TheOnlyIntruder said:
If you goto settings, Xperia Connectivity, USB Connectivity, you can pair your device with your computer (the phone will give you instructions), once the phone is paired with your computer you can simply goto the same menu, tap the name for your computer, and you will then be able to transfer files as if you had connected by USB in Media Transfer Mode all over wifi.
Click to expand...
Click to collapse
This feature only works on Windows. Do you know how to configure "Sony bridge for Mac" connect wirelessly like on Windows or any solution for Mac OS?
JMonkeYJ said:
Does anyone know if this feature still works after rooting? I really like it and don't want to lose it!
Click to expand...
Click to collapse
Yes, still working
But I prefer using Airdroid, it's much faster.
how to maximise transfer speed?
a question for networking gurus - i am currently on a 1 Gbps line. No doubt, international speeds will never reach that. However, tests to a local server do indicate that i can obtain around 400+ Mbps = around 50 MB/s (a very rough calculation, but for convenience let's just go with it)
However, i tried transferring a 1.5gb file using the xperia z2's wireless usb function, which indicated that around 17 minutes would be needed. that works out to only about 1.4 MB/s. If even a test connection through the internet can reach 50MB/s, why would a connection to my phone(right beside my comp) be only 1.4 MB/s ?
I'm sure the Z2 can handle faster speeds than that....would really be great if someone could give me a tip! thanks :highfive:
SexyIceCream said:
a question for networking gurus - i am currently on a 1 Gbps line. No doubt, international speeds will never reach that. However, tests to a local server do indicate that i can obtain around 400+ Mbps = around 50 MB/s (a very rough calculation, but for convenience let's just go with it)
However, i tried transferring a 1.5gb file using the xperia z2's wireless usb function, which indicated that around 17 minutes would be needed. that works out to only about 1.4 MB/s. If even a test connection through the internet can reach 50MB/s, why would a connection to my phone(right beside my comp) be only 1.4 MB/s ?
I'm sure the Z2 can handle faster speeds than that....would really be great if someone could give me a tip! thanks :highfive:
Click to expand...
Click to collapse
The Z2 isn't able to copy the content so fast on the SDcard. The I/O performance just isn't so great to handle 50MB/sec.
Jackos said:
The Z2 isn't able to copy the content so fast on the SDcard. The I/O performance just isn't so great to handle 50MB/sec.
Click to expand...
Click to collapse
Thanks for the explanation! I was just looking for solution to this problem as file transfer has been extremely slow.
Does that mean buying a fast SD card is pure waste of money? :crying: I just paid $169 for the fastest SD I could find in store...
jeremy.shi said:
Thanks for the explanation! I was just looking for solution to this problem as file transfer has been extremely slow.
Does that mean buying a fast SD card is pure waste of money? :crying: I just paid $169 for the fastest SD I could find in store...
Click to expand...
Click to collapse
In my opinion yes. I barely notice any change between my slow Kingston Class 10 MicroSDXC card and my SanDisk Extreme.
Also benchmarks show there is little change. No need to overpay for fast cards unless you're going to use them in a PC card reader with USB3.0.
Is there any possibility to connect the Amazfit pace to PC using the WiFi for file transfer? I tried the Software Data Cable. I installed the app on the watch, but after starting it always crashes...
Or isnt possible to use the bluetooth?
Install at watch this file manager, activate wifi at watch in it settings, open ftp-server in file manager. Works while backlight is on.
MyPhoneExplorer does this thing very good
Hello, well I respond on another thread but I paste my last comment here too, it may be useful for some people :
I just tried to install this free app Wifi File Transfer apk from https://apkpure.com/wifi-file-transfer/com.smarterdroid.wififiletransfer and it's working really great!
I used adb to install it.
Once installed click on it to launch it, it is true that the screen is small but you can navigate by dragging up with the finger, the upper part of the app to "start" button then click on it. Then a message appears to check that everything works, click on the "V" green then a "stop" button appears, drag with your finger without clicking on "stop" the upper part, the link appears which can be used to connect by an internet browser (any of them)
Click on "Stop" to stop the app.
Pros: you can access all the files of your watch and for example transfer themes directly into your watch without having to connect it to your computer. Another advantage, you can use any computer or device with web browser connected to the same wifi as the watch. So it will work with your smartphone too.
Cons: do not stay too long connected because your battery will not like too much ...
Hello, I am trying the wifi file transfer, but when I try to start it, it says "wifi not connected". I go to watch settings to connect the wifi, but when I come back to application, it says again wifi not connected.
Any idea?
Thanks
Had same problem connecting Amazfit Stratos to Windows 10.
Easily solved with cleaning the contacts of the watch with a simple pensil eraser!!
No need to thank