BAMF kernel not flashing. - HTC Rezound

I flashed BAMF's ICS V. 1.0 rom and loving it. I have the kernel from .8 (dirty) however. I tried flashing the new sense 1.5 but it fails everytime. It keeps saying it cannot find script. Any idea why it's not flashing correctly?
Sent from my ADR6425LVW using XDA

When does it say "cannot find script?" If it says that in recovery you probably got a bad download.

sanders539 said:
I flashed BAMF's ICS V. 1.0 rom and loving it. I have the kernel from .8 (dirty) however. I tried flashing the new sense 1.5 but it fails everytime. It keeps saying it cannot find script. Any idea why it's not flashing correctly?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
Flashing in recovery? Should be flashed in hboot
Sent from my ADR6425LVW using XDA

sanders539 said:
I flashed BAMF's ICS V. 1.0 rom and loving it. I have the kernel from .8 (dirty) however. I tried flashing the new sense 1.5 but it fails everytime. It keeps saying it cannot find script. Any idea why it's not flashing correctly?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
roms are flashed in recovery and kernels are flashed in bootloader

nosympathy said:
Flashing in recovery? Should be flashed in hboot
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
I got it working. Thanks for the help.
Sent from my ADR6425LVW using XDA

Related

[Q] why is my com.phone.android stop responding on 2.17 based roms

So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
So I updated all radios and firmware. However no matter what ROM I use that uses the HTC base 2.17 it says no signal and phone process stops responding. It's always about 3 hours into the ROM it happens. I came from a warm ROM and a virus ROM with the same results. I have hboot 1.4 s-off.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Fix permissions from Rom Manager or the advanced option in CWM and reboot.
If that doesn't help, it's just a bad flash. Don't fret. Do an RUU and re-update the radio. There is no point in updating the firmware because when you flash a new ROM, you're replacing it. Then you can go ahead and S-OFF, root, flash a custom recovery, flash a ROM and kernel, etc.
Sent from a Shooter running Android 4.0.3 via XDA Premium.
megabiteg said:
Have you tried flashing the kernel only after the ROM?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
tuscani1821 said:
Do you mean the stock kernel? I can't seem to locate the new one
Sent from my Transformer TF101 using Tapatalk
Click to expand...
Click to collapse
This is stock 2.17 boot.img
http://dl.dropbox.com/u/2437198/boot.img
hope it works for you
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
tuscani1821 said:
Just to make sure. I flash through fastboot or recovery?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Yes sir, fastboot flash boot boot.img would be the command to use once you set the phone to fastboot mode
Sent from my PG86100 using Tapatalk

Need 1.50 hboot

Please help! Want to flash jb rom but stuck on 1.58
Sent from my PG86100 using xda premium
You have to get s-off and downgrade boot. Lots of guides on how to do this. Try searching.
Sent from my PG86100 using xda app-developers app
Have s-off but no luck in finding downgrade hboot
Sent from my PG86100 using xda premium
demar01 said:
Have s-off but no luck in finding downgrade hboot
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Here are the CDMA hboots. http://forum.xda-developers.com/showthread.php?p=30014044
Here's a guide on how to flash an AOSP ROM. http://forum.xda-developers.com/showthread.php?t=1930770
Sent from my PG86100 using xda app-developers app
Thanks a lot fellas.
Sent from my PG86100 using xda premium
Okay I really give up! I've done everything. Downgrade, swipe, flash and nothing. Get stuck on boot loop. The only rom it picks up is SOS M.
Sent from my PG86100 using xda premium
demar01 said:
Okay I really give up! I've done everything. Downgrade, swipe, flash and nothing. Get stuck on boot loop. The only rom it picks up is SOS M.
Click to expand...
Click to collapse
Which hboot did you flash? Have you flashed the latest (2.89.651.2) firmware? Did you use 4EXT recovery and "format all partitions except SD card"?
ramjet73
ramjet73 said:
Which hboot did you flash? Have you flashed the latest (2.89.651.2) firmware? Did you use 4EXT recovery and "format all partitions except SD card"?
ramjet73
Click to expand...
Click to collapse
have you searched? can you read? am i overreacting? there are many guides.... ;(
Ramjet, I flashed hboot 1.50 and I'm using 4 ext recovery. Now about the firmware, do I need to flash the latest? The crazy thing is, I had lens jb rom and working great. But the Google voice was getting on my nerves. So I thought it was the rom. I flashed back to SOS M thinking I can get rid of goggle voice and still there. Well long story short, I disable Google voice and now when I try to flash back lens jb rom, it stays on boot loop.
Sent from my PG86100 using xda premium
demar01 said:
Ramjet, I flashed hboot 1.50 and I'm using 4 ext recovery. Now about the firmware, do I need to flash the latest? The crazy thing is, I had lens jb rom and working great. But the Google voice was getting on my nerves. So I thought it was the rom. I flashed back to SOS M thinking I can get rid of goggle voice and still there. Well long story short, I disable Google voice and now when I try to flash back lens jb rom, it stays on boot loop.
Click to expand...
Click to collapse
It would be a good idea to update to the current firmware (from the 2.89.651.2 build) if you haven't already, but I doubt that's your problem. Make sure to do a "format all partitions except SD card" in 4EXT right before flashing the JB ROM. Do not do a superwipe script as the latest AOSP ROM's don't seem to like that.
ramjet73
Thanks jet
Sent from my PG86100 using xda premium

Soab 1.04 boot looping any ideas ?

I have a thunderbolt s-on radio 1.49 I'm running a sense 3.0 ROM at the moment with cwm I've been wanting to try the bliss ROM soab but everytime I install I get stuck at the boot screen then just starts over but never booting into the Rom. I'm a experienced user been toying around since 2007 so if u can help me out let me know thanks
Sent from my ADR6400L using xda app-developers app
I bet you that the Rom you are trying to flash has a different kernel and that is why it is bootlooping. You need to flash the stock kernel or try using 4ext. It has an s on flashing tool.
Sent from my ADR6400L using Tapatalk 2
Ok that sounds right can u point me to the right place to get the stock kernel ?
Sent from my ADR6400L using xda app-developers app
What if I boot into recovery useing comand prompt
Sent from my ADR6400L using xda app-developers app
Won't make a difference if you boot using a command prompt. If the Rom has an aftermarket kernel it won't boot for your device because it will be unable to flash the custom kernel since you're s on. It can however be done you just have to go about it a different way. I do.t know how to do it that way though but there are guides. I would try getting s off honestly. It's easy to do.
Sent from my ADR6400L using Tapatalk 2
definitely flash back to stock rom and get s-off it makes things so much easier
Yea it does thanks u guys I flashed back to stock from hboot then used the thunderbolt tool gained s off then flashed recovery wiped then installed booted right up thanks for your help
Sent from my ADR6400L using xda app-developers app

Can't flash sense 4.0 or higher after flashing a aosp Rom.

So after flashing aosp Rom I can't seem to flash anything other than sense 3.6 roms. Why I try I get a constant booting. I'm s-on and also I've noticed the roms with kernel zip built in. The PH98IMG doesn't install on ad card. But zips flashed in recovery do. Also bootfast isn't working either, even tho phone is recognized by computer. Any help would be appreciated on this thanks in advance.
Sent from my ADR6425LVW using xda premium
ghostt021 said:
So after flashing aosp Rom I can't seem to flash anything other than sense 3.6 roms. Why I try I get a constant booting. I'm s-on and also I've noticed the roms with kernel zip built in. The PH98IMG doesn't install on ad card. But zips flashed in recovery do. Also bootfast isn't working either, even tho phone is recognized by computer. Any help would be appreciated on this thanks in advance.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
if you can't get to fastboot then you have the zip from another file on there. delete that then in order to get that certain rom to work you have to extract the roms boot.img and fastboot flash on pc.
abrego47 said:
if you can't get to fastboot then you have the zip from another file on there. delete that then in order to get that certain rom to work you have to extract the roms boot.img and fastboot flash on pc.
Click to expand...
Click to collapse
Done that, even tried funky kernel. Three weeks now no change. Thanks tho
Sent from my ADR6425LVW using xda premium
Have you tried flashing an ruu? Returning to stick would be one of you best options if possible..
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
Have you tried flashing an ruu? Returning to stick would be one of you best options if possible..
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Was thinking of that as a last resort. Starting to look like I'll have to.
Sent from my ADR6425LVW using xda premium
ghostt021 said:
Not yet. Was thinking of that as a last resort. Starting to look like I'll have to.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
I'd you go e it a try let is know.. in case any one runs into the same problem.
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
I'd you go e it a try let is know.. in case any one runs into the same problem.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
RUUed back and problem continues, next I guess to S-OFF ????
Sent from my ADR6425LVW using xda premium
ghostt021 said:
RUUed back and problem continues, next I guess to S-OFF ????
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Personally I don't know if that would help, well....actually I don't see why it wouldn't cuz the s-off process will wipe everything.. I'd say do it and flash somethin fresh, don't nandroid after.. try a sense 4 Rom fresh.. if it still doesn't go id try flashjg another aosp Rom that is known not to cause this problem your havig, then try flashing s4 again.. I'm really curious as to why this is happening.. I'm not sure if any of this would help but these are the steps I personally would take to try and trouble shoot..
Sent from my ADR6425LVW using xda app-developers app
famouscollin said:
Personally I don't know if that would help, well....actually I don't see why it wouldn't cuz the s-off process will wipe everything.. I'd say do it and flash somethin fresh, don't nandroid after.. try a sense 4 Rom fresh.. if it still doesn't go id try flashjg another aosp Rom that is known not to cause this problem your havig, then try flashing s4 again.. I'm really curious as to why this is happening.. I'm not sure if any of this would help but these are the steps I personally would take to try and trouble shoot..
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Crazy is, the problem seems to be something to do with kernels. I can only flash one all others even funky kernel with install thru fastboot, but the out come is the same. Continuous booting. At this point I don't see S-_OFF will fix the problem either. I ruued twice factory reset and used Scott's ten wipe and clean installs only to in up with the same out come.
Sent from my ADR6425LVW using xda premium

[Q] NEED HELP FINDING CORRECT RUUs

I NEED HELP FINDING THE CORRECT RUUs FOR MY PHONE
ITS RELOCKED
SHOOTER XC SHIP S-ON RL
HBOOT 1.58
1.09.00.0108
SOMEONE PLEASE HELP ME ASAP
IM TRYING TO GET MY PHNE BACK TO STOCK
I don't think there is a ruu that will work
You would need to get soff first
Sent from my Evo 3D CDMA using xda app-developers app
hossman said:
I don't think there is a ruu that will work
You would need to get soff first
Sent from my Evo 3D CDMA using xda app-developers app
Click to expand...
Click to collapse
HOW DO I GO ABOUT DOING THAT? "soff" any links or videos will help
I assume you have VM evo v
http://androidforums.com/evo-v-4g-all-things-root/695161-s-off-root-fix-everything-all-in-one.html
Sent from my Evo 3D CDMA using xda app-developers app
yes its VM and when i tried to what the post said, during the RUU part it said hboot version is older update filed,what should i do???
You cannot run ruu. There is not one for hboot 1.58.
You need to flash a Rom, like harmonia
Then get soff
Then if you need to, you can run ruu
Why do you need to run ruu in the first place? Maybe we should start with that
Sent from my PG86100 using xda app-developers app
hossman said:
You cannot run ruu. There is not one for hboot 1.58.
You need to flash a Rom, like harmonia
Then get soff
Then if you need to, you can run ruu
Why do you need to run ruu in the first place? Maybe we should start with that
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
im not really sure, what happen was when i was tryin to switch roms but my sd card was full so i just erased everything off the card and the backup was on the card so when i tried to do the backup it wasnt there,the rom that was on my phone didnt load so now my phone doesnt turn on,,, i want to just get my phone stock so i can redo everything,
also when i tried to flash a new rom it unsuccessful,and i wanted to kno if i can just download someones backup and use that,and if i can where to get it
So your recovery still works?
What Rom did you try and flash
I would suggest trying to flash butterz sense, as it is mostly stock and should work with your hboot
Sent from my PG86100 using xda app-developers app
i think i tried that one anf the wifi didnt work,i can also try again
and yes my recovery still works,i tired flashing other roms but they all failed
Ok the butterz rom worked.but the wifi doesn't work.just says error. is there any way to fix that or is there any way to get my phone.back to stock
AKEEM561 said:
Ok the butterz rom worked.but the wifi doesn't work.just says error. is there any way to fix that or is there any way to get my phone.back to stock
Click to expand...
Click to collapse
I forgot the last time I flashed butterz it had the WiFi error too, sorry.
Heres how to fix it
Download mirage kernel for ics
Boot to recovery and flash kernel
Wipe cache and dalvik
Should work for you now
Sent from my PG86100 using xda app-developers app
hossman said:
I forgot the last time I flashed butterz it had the WiFi error too, sorry.
Heres how to fix it
Download mirage kernel for ics
Boot to recovery and flash kernel
Wipe cache and dalvik
Should work for you now
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
Ok i did that and i believed it updated my phone but still an error on wifi
You could try and use flash image GUI.
But flashing through recovery should've worked
Sent from my PG86100 using xda app-developers app
How do i do that.and i will try to flash the kernal again
Instructions and link are in op here
http://forum.xda-developers.com/showthread.php?t=2175191
Sent from my PG86100 using xda app-developers app
hossman said:
Instructions and link are in op here
http://forum.xda-developers.com/showthread.php?t=2175191
Sent from my PG86100 using xda app-developers app
Click to expand...
Click to collapse
thank you lol its finally working!!! but what if i wanted to load another rom on here,i wanted to use the viper one
AKEEM561 said:
thank you lol its finally working!!! but what if i wanted to load another rom on here,i wanted to use the viper one
Click to expand...
Click to collapse
I don't remember viper, but I think it requires hboot 1.50, you need s off to do that
Sent from my PG86100 using xda app-developers app

Categories

Resources