Related
Hey guys just wanted to say thanks for all the help you provide on a daily basis, for all the people trying to unlock the potential in their phones. However with that being said I might have tried too hard and messed up my phones. I have a Samsung Vibrant SGH-T595 with 2.1 (update 1) updated officially by Samsung.
I rooted the phone, used clock work recovery mod and then downloaded and installed cyanogenmod 7.1 RC. However in the end I did not like so I tried to go back using my backed up copy created by clockwork mod. Doing this has now what you would call "soft bricked" my phone.
The phone is currently stuck on the Samsung boot screen when trying to power on the device. I am unable to put it into download mode via the three button setup, but I bought a USB jig and it sets it into download mode.
Everything seems great at this point but the Odin program is unable to recognize my phone. I have downloaded the official Samsung Kies, and 64 bit drivers as well for my windows 7 system but it is unable to detect my phone. I believe it maybe a defective USB issue with this phone but not sure since it can be charged through USB but I can't remember the last time I was able to connect it to the PC and transfer files via the USB cable.
My question is what else can I do other then sell it for scrap?
Try another USB cable and different ports. It will recognize it eventually.
As you have a windows 7 x64 bit version i guess Odin may need to be opened by giving Administrator permissions.
Try right clicking odin and click Run as administrator. I guess this should work.
Ran into this issue last night with my wife's Nook Color and moving some file and driver issues. Guess what? It was a bad cord. Actually used my Vibrant cord and it was instantly recognized. Yes sometimes it IS actually THAT simple.
I also suggest you go to the Dev section and download the AIO Toolbox (links are live again and don't forget the .Net files too). Uninstall the drivers you have installed and run to toolbox. It has all the correct drivers, pit/tar files and Odin. It is an invaluable tool.
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Woodrube said:
Sidenote: Kies is notorious for hardbricking devices. You should stay away from it altogether.
Click to expand...
Click to collapse
Exactly. And that is how i tried updating my vibrant to froyo and ended up hard bricking it..
Yeah like someone in here said, download aio vibrant toolkit.. its a surefire way to know your drivers are good and right.. once youve ruled them out, try a diff usb port and cable (mentioned above as well). If nothing works, then you may begin to entertain the idea that your phone is in difficult position.
Probably not hardbricked tho, vibrants are very resilient; just keep trying.
Then ttheres jtag and unbrickable mod if youre absolutely sure lifes over
Sent from a cell tower to the XDA server to you.
Thanks guys I ended up recycling my phones cause nothing I did worked. I did try AIO toolbox got the drivers, tried different cables. My SG II is able to be recognized by odin 1.85 with no issues but not my vibrant. I believe it is an issue with the vibrant's usb port. I originally rooted it by doing the update.zip fix from its external sd card, did not use my usb cable at that time. My other vibrant is completely hard bricked since it wont power on with two different fully charged batteries. Anyway thanks again and next time I will research more before modding my phones.
Hey OP,
I did the same exact thing as you and soft bricked it in the same manner. Then when I tried to get Odin to recognize the phone it wouldn't with my Samsung cable. I thought I was out of luck but I went and bought a USB cable made my Belkin from Meijer and Odin recognized it! I looked at the Samsung cable and the Belkin cable and the black plastic inside the microUSB in the Belkin is thicker than the Samsung. I think that helps create a tighter contact between phone microUSB and the cable. I thought I was screwed like you and I fixed the issue with a new cable!! That simple
I used the Samsung Galaxy S II usb cable which looks like it has a very tight connection with the contacts like you said. Thanks anyway I will try that brand of cable, if I ever run into that issue.
People!, I'm about to pull all my hair out on this one
Vibrant is soft bricked in a boot loop after a incomplete flash, I am able to get it into download mode but both my windows machines say USB device isnot recognized, and thus, I cant use ODIN to return to stock. When I try to manually point windows to the samsung drivers I get nothing…
So far I have tried drivers from:
-Bay_wolf's AIO Vibrant Toolbox 2.5
-USB drivers for vibrant from samsung support site
-Drivers from samsung keyes
Side notes that might help: I was perviously using a Hellybean Rom. My device displays "Galaxy S gt-9000" on boot... not sure when that came to be but maybe some rom changed some important recognition stuff??...
I found this thread http://forum.xda-developers.com/showthread.php?t=1008383 but no help...
Any help would be greatly appreciated!!
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Toast6977 said:
Try a different USB cable. This happens more than you'd think. Even cables that have worked just fine hundreds of times.
Also.... Locate the drivers in system/device manager and delete them manually and try to install them again. Unplug device and install fresh ones from either aio toolbox or Kies, then plug phone back in.
Best of luck!
Click to expand...
Click to collapse
Thanks a ton for reply but, sadly, no dice.
Tried connecting the phone, getting the "unrecognized device" prompt, finding "unknown device" in device manager, right clicking to uninstall. rebooting my machine, using various install methods to re-install drivers, re-connecting, and nothing.. same issue...
I lost the original cable a while back, but can't accept that NONE of the other 5 cables used are all broke... specially if the computer recognizes something going on... is it worth buying a new one?
Losing hope here, been like this for 4 days now, think it's time to go get a new phone. :crying:
Even so, it would have been nice to get what was a perfectly working phone back if only to keep it as a mp3 payer.
If anybody in New York, NY has a working odin set up that can do this for me, I have a 6 pack of your favorite beer with your name on it.
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
For what its worth, the gt i9000 screen appears after your on a custom GB boot loader and Odin back to stock (or probably Odin flashing any other ROM) you can change it by flashing the GB boot loader again. My phone says its a i9000 too, but I'm just about lazy enough to not bother changing it, lol.
So that's unrelated.
eksasol said:
It could be a hardbrick such as bootloader getting corrupted that happened to my Sony Xperia Play (now an expensive paper weight).
I assume you boot into download mode by holding the two volume buttons, then connect the cable? Have you tried on a different PC? It can also be the weak powered USB port on the PC. Also when you uninstall the Samsung driver, check the option to also delete USB driver and uninstall any drivers. Also which version of the driver are you using, have you tried version Samsung USB Driver 1.5.3? And the drivers from here: http://www.samsung.com/us/support/owners/product/SGH-T959ZKATMB#
Click to expand...
Click to collapse
Ok, faith momentarily restored. But I have questions:
-What do you mean when you say "check the option to also delete USB driver and uninstall any drivers"? I dont get such a prompt from right clicking on "unknown device" and selecting uninstall? Is there another method to uninstalling drivers?
-In the link attached, I can only find "Device(Install),USB Driver (Software) (ver.1.0)" not the 1.5.3 version mentioned. What am i doing wrong here? currently searching google for the 1.5.3 but finding nothing.
I get into download mode by holding volume- up + power. Have 2 PCs ( win xp and win 7) and a mac running mountain lion (but never ever have been able to get Heimdall to work, so devoting time to odin.)
Thank you for the time + help, guys, I really do appreciate it in the time of utter un-nerdness.
If the device is already installed it will have a check box that said "Delete the driver software for this device." If its unknown then obviously not. By "uninstall any driver", I mean uninstall any Android drivers you current have installed and reboot before you reinstall the new driver.
Although I doubt it will make a difference than the one I linked above, you can try the Samsung driver version 1.5.3: http://www.mediafire.com/?r0uc3h413qcy80z
If you did manage to get into download mode and see this: http://images.google.com/search?num=10&hl=en&site=&tbm=isch&source=hp&q=download+mode
Then it mean there is a very good chance you can restore the phone, if you can find a computer to recognize it and Odin to see a COM port.
I definitely think it would be worth the money to go buy an OEM USB cord. I can't tell you how many times I have seen this and a new USB is the fix.
sent from the depths of helly bean
OK guys...
My friend, who also owns a Vibrant, let me borrow the cable that came with the phone for the last 2 days.
Tried to make ODIN work on both PCs at home, gave Heimdall a shot on my mac, even hijacked a computer at work for the better part of the morning and freshly installed USB drivers 1.5.3 before connecting. All for nothing... “Unknown device” across the board....
At first I felt that with being able to get into download and have SOME kind of a reaction from connecting to PC had to be a good sign. Almost completely convinced that there is some unknown, unworkable hardware problem present. Definitely, officially, unremarkably out of ideas here.
Nothing is beautiful and everything hurts.
Last thoughts? Options at this point?
Also, tried One-click Unbrick tool on mac. I got a "is your phone plugged in, is it on download mode?" error, but anyone reading this down the line with a similar problem should check it out.
http://forum.xda-developers.com/showthread.php?p=15330252
Well, the day before it occurred to me that I'd like to install a custom ROM, therefore I went on to plug my phone into my PC and for my surprise, the phone didn't pop that MTP warning and the PC did not recognize it.
So I went around and changed USB ports, cables and PCs, same thing.
Decided to try Mass Storage mode, when I press the START button and put in the cable it goes back into the main start screen.
So I went on and tried that *#7284# trick people used since apparently 4.0.3 bugged some crap stuff in the phone, no success either.
Strangely enough I can connect the "pendrive dongle" and it will map pendrives.
Well, I don't have my phone rooted or with SU so that means CWM from app store won't be able to install the recovery module, and I can't install... you get the picture.
Nor ODIN nor HEIMDALL will recognize my phone in recovery mode, wich suggests that the data lanes on my phone went somewhat dead.
Finally, any cable I plug in the phone says it's charging my device, wich leads me to belive that the usb port is dead.
Anyone had this issue?
Anyone can confirm me I'll have to take it to Sammy's assistance?
Sure looks like the USB is dead/dying.
Sent from my digital submersible hovercraft.
So I got one more question, can I root and/or install CWM so I do not stay dependent of the USB to update it or I do need to plug in the USB to install CWM through ODIN?
Several problems
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Angelkom said:
It can be several reasons
1.the usb is dead buy new
2. try factory resetting the device
3. install kies on pc it will install all the drivers that you need
4.your usb port(of the phone) is dead
I had the same problem pc was saying "USB cannot be recognized" I TRIED EVERYTHING from factory resetting, changing pc usb ports, changing usb, changing kernel, roms, trying on other pc, reinstalling kies and drivers but nothing. The problem was in the usb port on the phone where you connect the charger on the phone. That part is weak and so you have to change it. Take to customer service with your warranty and they will fix it without charging anything just tell them your problem and say that you read that most of the galaxy s2 users have this problem and that you didn't touch the hardware of the phone
Click to expand...
Click to collapse
Warranty has already expired.
Kies was installed on the PC, ODIN gives no info @ COM port.
I wanted to connect it just to root and install CWM so I can swap ROMs as much as I want.
Thing is, the customer service wants 1 week to assess the issue and probably 100USD to fix it.
So for some god-knows-why reason my phone decided to conect to MTP while charging, I quickly restarted it into revocery mode and flashed CF_Root w/ CWM5.5.
Successful!
Bloody USB thingy!
Now I can start messing around with the phone.
Anyone has a n00blet guide on ROMs?
I was thinking about moving to CM 10.1, one of those nightlies running 4.2.2.
This is the one I used >> CF-Root-SGS2_XW_OXX_LPE-v5.5-CWM5
Can anyone suggest actions?
For future you should change your USB-Port. Here we get one for about 15 € (about 20 $) in ebay. It's very simple to change and then you have a full working phone again. Just watch the Videos on Youtube and everyone can do this. Hope I could help!
Hi guys,
Its a bit confusing but I'll try to keep it as short as possible. It seems basically that I can charge fine in recovery and download but not in the ROM. Syncing doesn't work at all except download..
I have an i9100m. Ran NeatROM and RootBOX and dabbled with a few roms.
Now I'm not sure if it was the roms or wear and tear but I had ASSUMED until today that my USB port was messed. It would not even charge from a PC nevertheless mount as a mass storage on my PC. It can charge fine from an AC adapter.
Anyway, today I randomly decided to put my phone into download mode and what do you know, the phone detects, and I even see it in ODIN, so I guess my USB port is not messed afterall. Perhaps something with the ROMs and kernels that messed it up?
I think this was around the same time when my Triangle went away.... (I never removed it). In download mode now, it says:
Custom binary Download: NO
Current Binary: SAMSUNG Official
I'm rooted and not stock at all so I wonder if that's the cause?
I was thinking of downloading a stock TAR of my carrier and flashing through ODIN. Do you guys think this is sufficient to "Reset" it back to how it was all the way before? And then I'll root and go back to one of my trusted roms (and not mess around)
Thanks
Do you use the original USB cable to connect your phone? That could be an issue.
Anyways, I don't think that something is messed up software-side if you tried several ROMs.
Worst case is that the USB port of your phone is damaged =/
Gesendet von meinem GT-I9100 mit Tapatalk 4 Beta
Yes I am using the original cable. (all same result but obviously wanted to use the original just in case)
I was thinking the USB port was damaged too because after reading, I guess apparently I accidentally created a usb jig? (triangle went away + stats wiped...)
But that aside, if my USB port is damaged, how come when I'm in download mode, PC and ODIN detect a device is connected and it charges, whereas within the ROM, I get neither ???
Just an update guys,
I used ODIN to flash completely back to stock... and I still cannot charge from PC. Basically computer doesn't see the phone at all. So it has to be a damaged port.. unless theres something else other than the internal SD that I can wipe????? I wanted to wipe everything..
Still really puzzles me though... that ODIN can see it in Download Mode.
One of the mysteries I guess.
Did you try to clean your mini usb port on the mobile? It could help.
Sent from my GT-I9100 using Tapatalk 2
So....your phone only charges on DL Mode?????
Sent from the little guy
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.Just strange that I was able to flash an entire stock image through ODIN but in the ROM can't even get the computer to recognize that ANYTHING is plugged in (or the phone to charge so the phone doesn't see anything either)
And again, whats even more strange is that i had that one cheap extendable USB cable that probably messed everything up (it removed my triangle..so I accidentally somehow created a jig?) is able to CHARGE the phone even in ROM but still the computer can't see it as a device. LOL
This is so messed. I guess my main thing is even if I go ahead to replace the USB port (get it repaired), do you guys still think this problem would occur... =\
stx8 said:
I have tried to blow some air in there.. any other suggestions?
Well, the computer only recognizes the device in download mode, Windows sees the device, otherwise it doesn't.. =\
Click to expand...
Click to collapse
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Wired99 said:
I currently have the exact same problem, except for the flaky usb cable removing your triangle. Mine is still there.
I brought my S2 to a repair shop because i was sure it was my USB port, but the guy there told me it connected in download mode just fine so the USB port should be fine.
Here is what I tried so far
- cleaned USB port
- Used diferent cables
- Used different PC's
- Used different kernals
- Used different roms
- Re-formated/cleared/wiped everything I could find.
Did anyone find a solution? Should I still have my USB port replaced?
Click to expand...
Click to collapse
did u tried to change the usb port ,because download mode doesn't require a battery ,u can try to go to download mode then remove the battery and u will still in it
hardware problem
Hi. Wifeys S3 (just over a year old) has started bootlooping.
I can get into Odin and stock recovery but nothing else. The phone was always off limits to me so it has never been rooted of had USB debugging enabled. Ive tried adding a stock ROM to the SD card and installing via stock recovery but no good. Ive tried installing Kies but it wont find the phone. the USB drivers ive installed just come up with an error for the phone.
Am I stuffed ? Any options out there ? Im an ADB novice ....
Hi there,
no worries mate, just boot into Download Mode and flash a fresh stock ROM via Odin. Before you do that make sure
to read and understand stuff, otherwise you might permanently brick wifey's device. Make sure to flash only files intended for
that particular device. Ask before you do something stupid you didn't understand.
You will find everything about i9300 here:
http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125
Benko111 said:
Hi there,
no worries mate, just boot into Download Mode and flash a fresh stock ROM via Odin. Before you do that make sure
to read and understand stuff, otherwise you might permanently brick wifey's device. Make sure to flash only files intended for
that particular device. Ask before you do something stupid you didn't understand.
You will find everything about i9300 here:
http://forum.xda-developers.com/galaxy-s3/general/samsung-galaxy-s3-sticky-roll-thread-t2344125
Click to expand...
Click to collapse
Thanks.
Ive installed ODIN. Downloaded latest Samsung Drivers. Found a ROM (stock)
but ..... i cant get the device to be recognised by the USB drivers. I can get into ODIN on the phone - but i keep getting USB not recognised (Device Descriptor Request Failed).
Grrrrrrr
Uninstall kies and do a full driver wipe, then start again with just the usb drivers and odin. Try different usb leads and ports.
The symptoms so far describe motherboard failure, if you can't get odin to connect then it looks terminal.
I'd presume you've tried factory reset and cache clear in stock recovery.
boomboomer said:
Uninstall kies and do a full driver wipe, then start again with just the usb drivers and odin. Try different usb leads and ports.
The symptoms so far describe motherboard failure, if you can't get odin to connect then it looks terminal.
I'd presume you've tried factory reset and cache clear in stock recovery.
Click to expand...
Click to collapse
uninstalled kies - uninstalled drivers. reinstalled drivers. still no connection and device descriptor request failed.
The phone isnt that old (was provided as a replacement for a dead Xperia) - maybe 18 months - so I might contact Samsung and see what they say
Honestly, in my experience (escpecially since using boxes) it is rarely a hardware brick.
1 from 10 dead phones or bootlooped devices have a defective board, the rest is recoverable by software repair.
There a tons of threads around like 'i9300 not regonized on USB port' etc. I find it much too early to give up saying it's the board.
It's probably not the board. Anyway, if you don't want the hassle of finding the fault and you are still under warranty of course you might just as well
see your service center.
But: it actually is a way to pull customers money from their pockets. I've seen HTC and Samsung changing boards 'cause the device has been rootet or BL unlocked.
They tell you it is their policy to return devices only in factory state and take all sorts of excuses to charge you changing the devices board without any neccessity.
quietening !
boomboomer said:
Uninstall kies and do a full driver wipe, then start again with just the usb drivers and odin. Try different usb leads and ports.
The symptoms so far describe motherboard failure, if you can't get odin to connect then it looks terminal.
I'd presume you've tried factory reset and cache clear in stock recovery.
Click to expand...
Click to collapse
Just to quieten a little the OP, I can use ODIN on one of my laptops and not the other (USB not recognized depite wiping all KIES elements on the laptop, rebooting, installing USBdrivers from Chainfire (I believe) and rebooting.
No way. on the other laptop all is fine.
BTW This is a 9300 but not Qualcomm so I cannot find any soft to deal with nv files and EFS. ANyone knows if that exists for Exynox chipsets ? (so to have the adequate menu in Phoneutils)
Or is there a way to use command line to put the smartphone in theadequate mode for using EFS pro, or other NV tool (Qualcomm mostly, seem to me )
Regards
Have you tried booting the phone without the battery while on the charger? Hold vol up+home+power, release just power as the screen lights up.. vol down for download mode (needed for odin).
Sent from my GT-I9300 using Tapatalk