Phone won't turn on!!! - XPERIA X10 Q&A, Help & Troubleshooting

I tried to change my ROM from CM7 to M&M MiUi but I didn't unlock my bootloader beforehand and tried to install the MiUi ROM anyways. Now it just goes to the Sony Ericsson logo and won't do anything. I've tried SEUS and Update Service to see if I could repair it, but it just says that my version is not out yet. HELP PLEASEEE!!!!
YOU HAVE NO CLUE HOW PAINFUL IT IS FOR ME TO NOT BE ABLE TO USE MY SWEET BABY!!! T.T

I think we do Peter,since this is the 3rd thread youve started about it since 2 days ago.I can understand you are frustrated,but your meant to stick to the one topic so like others dont go repeating themselves etc.
So have you tried ,newer or older flashtool,is pc compaqnion set up,tried charging battery....................

battery is fine, i've tried flashtool 0.6.7.0, and pc companion won't fix it.

peterrchoi said:
battery is fine, i've tried flashtool 0.6.7.0, and pc companion won't fix it.
Click to expand...
Click to collapse
Use flashtool to flash for example android 2.1 like this. After that You should be able to flash back to 2.3 using SEUS.

Alright. I'll give it a try. Thanks!

jakuburban said:
Use flashtool to flash for example android 2.1 like this. After that You should be able to flash back to 2.3 using SEUS.
Click to expand...
Click to collapse
Thanks! My phone turned on

Related

[Q] Help! Downgrading from Free X10?

Hey guys, can anyone help me out here?
I downloaded and installed My Free X10 Beta 4.. I'm pretty sure I did everything properly but it left me with one problem, it wasn't letting me enter the SIM card pin and therefore wouldn't receive signal, causing it to reboot constantly..
I've tried changing the SIM lock on startup off but to no avail - I only get errors..
Since nothing else is working I want to downgrade back down to the Stock 2.1 version, can anybody help me? Much appreciated, thanks.
If u made a backup before u did the flash then u can restore the backup but u probably didn't lol... so u have to flash 2.1 Alltel over again
Sent from my X10i using XDA App
Actually I did, using the Backup and Restore app thingy, how do I restore it from there? Thanks!
If you used the SE backup and restore app then that won't be any use - it only backs up content, not Firmware..
Your best course of action is probably to try doing a repair using SEUS, or use flashtool to flash a standard SE ROM.
You know I was considering trying out Titanium Backup.. Too late now!
So I should just trying update in SEUS as normal and see what happens from there?
Sorry I'm such a noob. -.-
Yes - plug into SEUS and it will either say that you have the latest firmware, or will try to update your phone.. if it says that you have the latest firmware then you should be able to select the "repair" option...
If SEUS doesn't let you re-install the firmware then you'll need to reflash a standard ROM first.
Thanks for your help so far, you're a lifesaver
I'll try that now and get back to you when its done!
Ummmm. Not good, ran through SUES fine but its not working at all...
The phone starts up with the SE name and symbol then shuts down straight away?!
ChuckNorrisTheSecond said:
Ummmm. Not good, ran through SUES fine but its not working at all...
The phone starts up with the SE name and symbol then shuts down straight away?!
Click to expand...
Click to collapse
give it another flash using SEUS mate, occasionally there are problems when flashing a ROM.
If you are keen, you could use the flash tool that binary has posted. Pick the appropriate ROM package from his list, start the flasher batch file, restart the phone in flash mode and wait a few minutes.
binary's tool lives here - http://forum.xda-developers.com/showthread.php?t=825201 and another thread with more info is http://forum.xda-developers.com/showthread.php?p=10738467
Good luck and have patience - you cannot kill the x10 so it wont boot so you will be ok
Thanks mate, you've actually calmed me down now. It could be a late night but i'll figure this out.
Well if u had made that backup with xrecovery u would have been okay!
Sent from my X10i using XDA App
Go into the SEUS and use the repair function,It will reset the phone and give you the latest firmware.
Then use the XDA flash tool to re root it,Worked great for me
http://forum.xda-developers.com/showthread.php?t=965202
Sorry was away from the computer yesterday..
Well a new problem, the phone isn't staying on long enough to connect to SUES.. All the stuff in them other posts about Binary is going in one ear out the other, so to say.
Can you get into flash mode at all for SEUS?
If not, try taking the battery out, then connect the USB cable, hold down the back button, and replace the battery.
Beta 4 does not work on all devices
Hi,
in order to get back a working X10 just flash the beta3. I've had the same problem and flashed the beta3 (plus Google Applications) and afterwards it worked well
Regards
Stefan
Okay, all this stuff is confusing me, try talk in noobish terms I dont understand this flashing and stuff..
I'm upto the stage where I have the flasher, just how do I flash the software onto it? Thanks for your help so far guys..
Actually, ignore it, I managed to repair it with SUES and i'm back on 2.1 I think i'll think twice before installing Betas again! Cheers for all your help guys!!

How to go back to 2.1?

Hy guys.
I've installed Froyo Cyanogen 6.1.3 but my phone is freezing and rebooting.
i'd like to know how can I go back to rom 2.1.
Thanks all
flash it with seus
Can you explain it?
Sorry but i'm newbie.
alloha said:
Can you explain it?
Sorry but i'm newbie.
Click to expand...
Click to collapse
seus is sony ericsson update service.you need to first download this from the se product site.Once you install and open this application on your pc,the rest of the work is very easy and explained step by step.go for it.another thing---in future before you flash any custom rom,backup your virgin 2.1 using xrecovery so that you can always go back to this opening condition when you are troubled by the custom rom you have installed.
do press the thanks button if this helps you.
Ok, sathkartha.
I'll try it and remember to do the backup. Was my first time and i forgot to do the backup when i remembered was too late.If it works i'll post the result here and press the thanks button.
Thanks
sathkartha,
so, I've made it and followed the intructions and the message that came up for me was:
"No new software is available for your phone. Your phone already has the latest available software isntalled"
Do you have any idea what I can do from now?
Thanks
@alloha----on that screen itself,you will still see a prompt encouraging you to install--click that and move forward.
should I downgrade to 1.6 to seus works?
alloha said:
should I downgrade to 1.6 to seus works?
Click to expand...
Click to collapse
no need to and in anycase you cannot 'downgrade'!simply move forward from the message you have seen.
sathkartha said:
@alloha----on that screen itself,you will still see a prompt encouraging you to install--click that and move forward.
Click to expand...
Click to collapse
Sorry but it doesn't show to me.
I'll make some print screen and post here to you see. Ok?
Wait a minute!!! I think i'm on the way
you have to update seus or use PC Companion und update this sofware
flex96 said:
you have to update seus or use PC Companion und update this sofware
Click to expand...
Click to collapse
The SEUS's version is 2.11.4.11 the latest.
I was using the PC Companion and when it says to disconnect, turn off the phone and connect again the message that comes is: "there is no version. try again later"
am i doing something wrong?
alloha said:
Sorry but it doesn't show to me.
I'll make some print screen and post here to you see. Ok?
Click to expand...
Click to collapse
pc companion and seus are 2 different things.use seus only like i have explained.you will see the screen i have attached---click install and move forward.it is really simple.
sathkartha said:
pc companion and seus are 2 different things.use seus only like i have explained.you will see the screen i have attached---click install and move forward.it is really simple.
Click to expand...
Click to collapse
Thanks for the print, but it doesn't appear for me.
I'll keep trying. Any result i post here.
look at the screen which shows to me
shuold i put some archive in /system or /system/bin?
I think I see what the problem is here:
miniCM uses a modified build.prop so that neither SEUS nor PC Companion update the firmware at any moment,that's why your SEUS says that it doesn't have nay new software for you.
I'd say that instead of trying to go back to 2.1, rather try to do a clean install of any of the custom ROMs, and please do follow the instructions to the letter, most freezing and rebooting in custom ROMs happen due to not doing a factory reset before installing them.
@Akath19 i understand. I would like to go back to 2.1, make a backup and then install a custom ROM. Because I've tried to install a lot of time the custom ROM and this problem keeps boring me.
Talking about build.pro... there is some solution for it? like change this specific build.prob for another one that makes SEUS works?
ohh
you have to flash with the flashtool
because seus or other software couldn't flash it
sorry

[q] help desperatly needed

I've accidently done system format and wiped my whole phone. When I switch the phone on it sticks on the "Sony Ericsson" screen, I've tried pressing the back button hoping to get back to xrecovery but everything has gone.
I've read a few posts saying that pc companion can fix the problem but after trying that it doesn't find my phone, what has made it worse I don't have any back up stored anywhere to try fixing the problem
Can anyone please help me get my phone up and running again especially as it is my main contact to my son
Uninstall pc companion and redownload and install it,(That should sort the drivers out to recognise your phone) and if that does not work try SEUS
looks like you will have to go back to stock then use flashtool to root and reinstall xrecovery and start again...
tigerphil said:
I've accidently done system format and wiped my whole phone. When I switch the phone on it sticks on the "Sony Ericsson" screen, I've tried pressing the back button hoping to get back to xrecovery but everything has gone.
I've read a few posts saying that pc companion can fix the problem but after trying that it doesn't find my phone, what has made it worse I don't have any back up stored anywhere to try fixing the problem
Can anyone please help me get my phone up and running again especially as it is my main contact to my son
Click to expand...
Click to collapse
gregbradley said:
Uninstall pc companion and redownload and install it,(That should sort the drivers out to recognise your phone) and if that does not work try SEUS
looks like you will have to go back to stock then use flashtool to root and reinstall xrecovery and start again...
Click to expand...
Click to collapse
Thanks. In the process of downloading both now. Would I be able to go back to stock using either of these as I did not have anything backed up, not even the stock rom....my rom was stock anyway only rooted to get rid of certain apps
As an alternative you can use the flashtool and flash a generic firmware. That will put a stock rom and maybe even get an updated baseband depending on which firmware you grab. Check this thread and maybe bookmark it too:
http://forum.xda-developers.com/showthread.php?t=928343
Yes, either of these will put you on stock rom with the latest firmware and baseband for your region and phone.
hope you manage to sort it out...let me know if you have any problems, you can always pm if you need to
tigerphil said:
Thanks. In the process of downloading both now. Would I be able to go back to stock using either of these as I did not have anything backed up, not even the stock rom....my rom was stock anyway only rooted to get rid of certain apps
Click to expand...
Click to collapse
Sent from my X10i using XDA App
gregbradley said:
Yes, either of these will put you on stock rom with the latest firmware and baseband for your region and phone.
hope you manage to sort it out...let me know if you have any problems, you can always pm if you need to
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Thanks sooooo much for the help with this, downloaded SEUS and saved my phone all the help is much appreciated!!

Urgent please help!

ok so i have an x10. i rooted it succesfully with flashtool. i couldnt install xrecovery and i needed to know my version of busybox, so like a dope i turned the phone off and went to flash kernel downgrade in flashtool, so its like ive gone back 2 steps. but now, when i do the kernel downgrade, it discovers my phone but the root option does NOT APPEAR?!?! please help me
squarehead94 said:
ok so i have an x10. i rooted it succesfully with flashtool. i couldnt install xrecovery and i needed to know my version of busybox, so like a dope i turned the phone off and went to flash kernel downgrade in flashtool, so its like ive gone back 2 steps. but now, when i do the kernel downgrade, it discovers my phone but the root option does NOT APPEAR?!?! please help me
Click to expand...
Click to collapse
Can your phone still bootup correctly ? If yes try an older version of flashtool had this issue flash kernel upgrade turn on debbuging and unknown source and start from there
Sent from my X10i using xda premium
ive just used the repair phone in pc companion, will start again. damn!
squarehead94 said:
ive just used the repair phone in pc companion, will start again. damn!
Click to expand...
Click to collapse
Ok cool let me know the results
Sent from my X10i using xda premium
ok so got it re rooted, now i have a problem with installing x recovery... very similar story to this guy here. except mine did not install in the first place, but the error message and everything is the same, i get the same file already exists error and 2 read only errors and i have the same issue as this guy now.
http://androidforums.com/sony-ericsson-xperia-x10/371128-xrecovery-wont-install.html
Try doing force PSNeuter. I'm on my phone at the moment but when I get on the pc I can help you
Sent from my X10i using XDA App
Go to HERE and download Flashtool 0.4.2.0, with it, you can root, install xrecovery and unlock bootloader, if you wish.
You need have android 2.3.3, and don´t downgrade kernel.
If you want, install stock firmware.
It´s easy.
right, so do i just click install recovery?
because i rooted it, exactly like that, im running busybox version 1.8.4 or something like that, someone told me it automatically installed xrecovery when i rooted it... is this true? thanks
When you root phone with flashtool, it just root your phone. For install xrecovery you need click on install xrecovery, and when it over, you have xrecovery installed.
squarehead94 said:
right, so do i just click install recovery?
because i rooted it, exactly like that, im running busybox version 1.8.4 or something like that, someone told me it automatically installed xrecovery when i rooted it... is this true? thanks
Click to expand...
Click to collapse
Yes, you click the install recovery button. And no, when you root your phone, xrecovery is not added.
A little reminder also, you will never break the x10 by flashing to many times. So every time you run into something like accidentally downgrading kernels, just flash stock FW and start over. Again, the only true way for someone to permanently damage the x10 is only by damaging the USB port. So hold dear to that little port.
Hope you resolve your issue brah. Peace
is there anyway i can run flashtool and get it to recognise my phone without having to flash kernels?
and great, ill do that when i get in. if your on about 1700 gmt time, thatd be great.
thanks everyone, mucho appreciado!
squarehead94 said:
is there anyway i can run flashtool and get it to recognise my phone without having to flash kernels?
and great, ill do that when i get in. if your on about 1700 gmt time, thatd be great.
thanks everyone, mucho appreciado!
Click to expand...
Click to collapse
Not too sure what you're getting a that? Revise your question please.
its ok ive sorted now, thanks. dont know how to close a thread but this is sorted now, thanks guys!

[Q] NEED HELP (soft brick)!!!

I tried to install miui custom ROM but in the process i bricked my phone.
My biggest problem is that my computer cannot recognize my phone if I could get it recognized I could fix it.
And it seems i can't access my xrecovery I think I already heave ready backup but I can't get to it.
If it helps before I tried to install miui I had cyanogen rom (don't now the version)
PLEASE HELP!!!
PS my phone is:Sony erricson x10 mini
Did you try SEUS?
supersaker said:
I tried to install miui custom ROM but in the process i bricked my phone.
My biggest problem is that my computer cannot recognize my phone if I could get it recognized I could fix it.
And it seems i can't access my xrecovery I think I already heave ready backup but I can't get to it.
If it helps before I tried to install miui I had cyanogen rom (don't now the version)
PLEASE HELP!!!
PS my phone is:Sony erricson x10 mini
Click to expand...
Click to collapse
were you on a custom kernel or on the stock kernel? and what exactly does your phone not do? where does it get stuck?
Do you have Unlocked BL? Custom kernel? Any of this? Please provide better information so we can help you better ! if you don't have any of those, you'll have to use SEUS or PC Companion while on flash mode (like when you updated from 1.6 to 2.1 - or am I the only dat old guy here who did this lol)
RE:
XxLordxX said:
Do you have Unlocked BL? Custom kernel? Any of this? Please provide better information so we can help you better ! if you don't have any of those, you'll have to use SEUS or PC Companion while on flash mode (like when you updated from 1.6 to 2.1 - or am I the only dat old guy here who did this lol)
Click to expand...
Click to collapse
I heave BL and custom kernel. And thing i cant is to get my pc recognize my phone(my phone is not visible on my pc)
supersaker said:
I heave BL and custom kernel. And thing i cant is to get my pc recognize my phone(my phone is not visible on my pc)
Click to expand...
Click to collapse
What kernel and what ROM did you pair together? If you can't get anything to work, do a repair with SUS or PC Companion and start over again.

Categories

Resources