CHECK THIS OUT
..................................
I bought the XUMA USB WALL CHARGER from ebay: http://www.ebay.com/itm/Xuma-USB-Wa...ccessories&hash=item19cdc28442#ht_1810wt_1161
Theoretically, since is a 1.5A charger (or 1500ma) it should charge our device from 0 to 100% in about 1 hour and a half.
OR......
28 percent in just 30 minutes....................that's almost 1% per minute......
I'll get it this Friday and report back. Might as well go pick one up for yourself. You have to use your own USB Cable.... OEM Cable seems highly recommended.
CHEERS!
IF and only if its middle pins are shorted you will get a max of 1 amp charge, not 1.5.
I think just the pins on your cable need to be shorted so if you use your OEM cable that came with the Note then it should work.
OP- Please report back how it works out. Thanks for posting.
kimtyson said:
I think just the pins on your cable need to be shorted so if you use your OEM cable that came with the Note then it should work.
Click to expand...
Click to collapse
this is incorrect
kimtyson said:
I think just the pins on your cable need to be shorted so if you use your OEM cable that came with the Note then it should work.
OP- Please report back how it works out. Thanks for posting.
Click to expand...
Click to collapse
As said earlier, this is incorrect. If the pins on the cable are shorted, the cable won't pass data. If the pins on the charger are shorted, any USB cable will allow fast charge.
get a 10 amp charger and it will charge even faster.
Guys dont be stupid. Note wont charger faster than what an 1 amp charger does.
You have to have special kernel mod to get a higher amp charger to charge faster.
edit : if u r spending that money get a genuine hp touchpad charger. its 2amp. At least will be useful for other devices as well
[/COLOR]
drgopoos said:
get a 10 amp charger and it will charge even faster.
Guys dont be stupid. Note wont charger faster than what an 1 amp charger does. [lol]
You have to have special kernel mod to get a higher amp charger to charge faster.
<snip>
Click to expand...
Click to collapse
Wil Da_G's kernel mod allow this?
How would we go about implementing using a special kernel mod to get a faster charge?
capite said:
[/COLOR]
Wil Da_G's kernel mod allow this?
How would we go about implementing using a special kernel mod to get a faster charge?
Click to expand...
Click to collapse
It's being done on the Galaxy Nexus Already, so it's not impossible. http://www.xda-developers.com/android/kernel-patch-allows-force-ac-charge-for-faster-charging/
Also, for 9.99 i wouldn't be at a great loss, i needed a spare. figured i would do others a favor and test something else out.
stock samsung charger is shorted?
---------- Post added at 03:21 PM ---------- Previous post was at 03:21 PM ----------
i also have stock HTC wall chargers too, they shorted?
SayWhat10 said:
stock samsung charger is shorted?
---------- Post added at 03:21 PM ---------- Previous post was at 03:21 PM ----------
i also have stock HTC wall chargers too, they shorted?
Click to expand...
Click to collapse
Yes, and most likely. My htc charger is shorted for fast charge.
i'd buy this if its in stock
http://www.amazon.com/AmazonBasics-Wall-Charger-Outlet-Output/dp/B005CG2ATQ/ref=pd_cp_cps_0
Related
Hi all
I notice that the charger I got with my Atrix is 500mA (where my old Samsung Galaxy S was 750mA).
This isn't really an issue but does seem to result in very long charge times (especially, I imagine, as the battery is 1900mAh!).
So, as a question, how long do people find it takes to charge their phones (from nearly empty while the device is switched on)? I am interested to see what charge times are over mains and USB.
I would say, for me, mains is 3-4 hours and USB is 4-5 hours. And that is if I do not use the thing - if I am surfing the web or playing games, it can be all day on charge over USB.
So - is this the norm?
Cheers
James
Hmmm. The charger that came with my atrix supplies 750mA. Maybe you would like to check again =D
matthew5025 said:
Hmmm. The charger that came with my atrix supplies 750mA. Maybe you would like to check again =D
Click to expand...
Click to collapse
My Atrix charger, (AT&T), supplies 850mA.
---------- Post added at 01:04 PM ---------- Previous post was at 01:02 PM ----------
surrealjam said:
I notice that the charger I got with my Atrix is 500mA (where my old Samsung Galaxy S was 750mA).
Click to expand...
Click to collapse
500mA is the equivalent of USB 2. If you have a 500mA charger that came with your Atrix, it sounds like someone swapped out the chargers.
Where did you get your phone from?
My primary charger (from my old Sanyo Sprint phone) is 1A (or 1000mA). It has about a 2-3 hour charge time. So long as the charger outputs .5V (standard USB power), it should be safe to use a higher mA rating.
Has anyone noticed how slow the g3 charges without the oem cable.. If so what did you buy for a spare for fast charging. I need 1 for work and for my cars. Ty Matt
Some cables just suck. I haven't even used my OEM cable, it's still in the box. My wife has a G3 as well and she uses it. My two non OEM charge our phones just as fast as the OEM.
Try a different cable, that's my recommendation.
I wish mine did
matt406regal said:
I wish mine did
Click to expand...
Click to collapse
Did you check the output rate on your chargers Man?
Yea i have one at work that's a 2.1a from my old galaxy tab 10.1
matt406regal said:
Yea i have one at work that's a 2.1a from my old galaxy tab 10.1
Click to expand...
Click to collapse
What kind of cable were you using? You could have the best charger in the world but if you are using a weak cable with thin wiring it will not charge quickly. The G3 charges very quickly with OEM cables and with OEM Samsung cables.
I also have a Samsung cable and htc cable with the same results. Fast charging for me only with the oem cable and charger
I had issues with this too, but I've had a lot of cables go bad on me recently for some reason. Galaxy S3's stopped charging on sammy OEM cables too. Eventually I think they just wear out. The LG OEM seems like a nice heavy duty cable. Go to banggood or dx.com or something and pick up one of those USB Charge Testers. They show Voltage and Amperage. I have a LOOONG, cheap USB cable that I bought from one of those sites. It showed it was only outputting 0.23A. My phone was dead on the charger the next morning. OEM cable puts out almost 1.5A or a bit more on my sammy & LG chargers. I have a sammy cable that was showing 0A. Dead cable. Buy one...great way to tell if a cable's bad or the whole charger and they're cheap. Someone recommended the monoprice cables with the ferrite cores (not the 'premium' ones). Have yet to order any.
I use my Samsung galaxy chargers for all of my devices. They have the highest charging rate and the longest cables plus the cable comes out at a 90 degree angle for lower clearance.
Sent from my LGLS990 using Tapatalk
---------- Post added at 05:11 PM ---------- Previous post was at 05:10 PM ----------
Lost one once and found an oem one on eBay for $10.
Sent from my LGLS990 using Tapatalk
I noticed that my phone charges slow when I don't use the usb cable that with. Specially when I'm using a traveler charger
It's funny, my best charging cables are the ones that came with the 2012 Nexus 7 tablets. I was really sad when one of them started to fall apart.
But finding good cables is the absolute worst.
Can anyone tell me if xperia z2(d6502) supports the uch10 quick charger .
i'm planning to buy one but on the internet somewhere it shows yes xperia z2 supports while some people are saying no it doesn't support.
i'm confused. maybe if anyone who has already bought it can help me?
Why not use Jackos QC 2.0 zip and buy a QC 3.0 charger?
I have a dodocool DA56WUK QC 3.0 charger, a heavy gauge USB cable, and Jackos zip. Charging my Z2 is much faster at up to 1650mA.
---------- Post added at 08:27 PM ---------- Previous post was at 08:12 PM ----------
Also see this thread and my post here
http://forum.xda-developers.com/xperia-z2/development/sony-secret-revealed-qc-2-0-t3163490/page67
---------- Post added at 08:35 PM ---------- Previous post was at 08:27 PM ----------
Also, only the Japanese Z2 natively supports QC 2.0. Hence the need to use Jackos zip file.
Otherwise our Z2 models will only use a QC charger as a normal one, there will be no gain in charge current or voltage.
If you get a QC 3.0 charger it will serve newer phone models but is also backwards compatible with QC 2.0.
rubiicon59 said:
Why not use Jackos QC 2.0 zip and buy a QC 3.0 charger?
I have a dodocool DA56WUK QC 3.0 charger, a heavy gauge USB cable, and Jackos zip. Charging my Z2 is much faster at up to 1650mA.
---------- Post added at 08:27 PM ---------- Previous post was at 08:12 PM ----------
Also see this thread and my post here
http://forum.xda-developers.com/xperia-z2/development/sony-secret-revealed-qc-2-0-t3163490/page67
---------- Post added at 08:35 PM ---------- Previous post was at 08:27 PM ----------
Also, only the Japanese Z2 natively supports QC 2.0. Hence the need to use Jackos zip file.
Otherwise our Z2 models will only use a QC charger as a normal one, there will be no gain in charge current or voltage.
If you get a QC 3.0 charger it will serve newer phone models but is also backwards compatible with QC 2.0.
Click to expand...
Click to collapse
Bro I'm on Indian version of xperia z2 (d6502). Can you please explain me more if the jackos charger you saying will work on my phone. And what all things I need to do.
And also tell me if uch10 will work or not.?
It should work as your D6502 has the same Snapdragon 801.
You only need to install Jackos_QuickCharge2.0_rev5.zip
and then buy a QuickCharge certified charger.
I suggest you forget about the Sony charger and look at QC 3.0 ones instead. I got mine at a good price from Amazon. Also look for a heavier gauge USB lead.
Then when you're all set to go install a monitoring app such as Ampere; you can compare the different charge rates between your standard charger and your new QC one. You will definitely see a difference.
rubiicon59 said:
It should work as your D6502 has the same Snapdragon 801.
You only need to install Jackos_QuickCharge2.0_rev5.zip
and then buy a QuickCharge certified charger.
I suggest you forget about the Sony charger and look at QC 3.0 ones instead. I got mine at a good price from Amazon. Also look for a heavier gauge USB lead.
Then when you're all set to go install a monitoring app such as Ampere; you can compare the different charge rates between your standard charger and your new QC one. You will definitely see a difference.
Click to expand...
Click to collapse
What advantage will I have if I use a 3.0 quick charger.?
And will it heat th phone more? Or any device specific problem?
Which charger you have. Can I get the link please bro?
And thanks for your quick reply
Much appreciated.
More present devices are QC 3.0 certified so you should be better prepared when you buy a new phone by already having a v3.0 charger. Plus it's also backwards compatible with QC 2.0.
My Z2 always heats up on charge but no more than it did with the stock charger.
Details of my charger are posted earlier.
Google Qualcomm Quick Charge to get more of an idea between the versions (v4.0 is on its way), you can see what devices are currently supported.
rubiicon59 said:
More present devices are QC 3.0 certified so you should be better prepared when you buy a new phone by already having a v3.0 charger. Plus it's also backwards compatible with QC 2.0.
My Z2 always heats up on charge but no more than it did with the stock charger.
Details of my charger are posted earlier.
Google Qualcomm Quick Charge to get more of an idea between the versions (v4.0 is on its way), you can see what devices are currently supported.
Click to expand...
Click to collapse
Last few questions.
1. Do I need to flash the zip you gave for quick charger 2.0 support? (I guess tha answer is yes)
2. After flashing this zip, if 1 buy a 2.0 charger, it will work na? (yes too)
3. Quick charge 3.0 charger will be faster than quick charger 2.0. Because the phone supports 2.0 and with 3.0, we'll be providing more voltage than it can use? Whatsay about this?
1 - Yes. But read Jackos first post, particularly the latter part about partially supporting QC 2.0. I would say the zip works at about 70% of a fully supported device.
2 - Yes
3 - Read this https://www.qualcomm.com/products/snapdragon/quick-charge
rubiicon59 said:
1 - Yes. But read Jackos first post, particularly the latter part about partially supporting QC 2.0. I would say the zip works at about 70% of a fully supported device.
2 - Yes
3 - Read this https://www.qualcomm.com/products/snapdragon/quick-charge
Click to expand...
Click to collapse
Ans to 3: quick charger 3.0 is intelligently designed to find the exact power needed by a phone to charge efficiently.
Thanks for your help bro
Np mate. Good luck.
And don't forget to update this thread once you are set up.
rubiicon59 said:
Np mate. Good luck.
And don't forget to update this thread once you are set up.
Click to expand...
Click to collapse
http://www.amazon.in/gp/aw/d/B01ETD...charge+3.0&dpPl=1&dpID=41csKHB3AcL&ref=plSrch
Is this one okay? In My budget the dodocool one is pretty expensive. This one is okay?
The specs say it's QC 3.0 and most of the reviews are good too so I would imagine it should work OK.
rubiicon59 said:
It should work as your D6502 has the same Snapdragon 801.
You only need to install Jackos_QuickCharge2.0_rev5.zip
and then buy a QuickCharge certified charger.
I suggest you forget about the Sony charger and look at QC 3.0 ones instead. I got mine at a good price from Amazon. Also look for a heavier gauge USB lead.
Then when you're all set to go install a monitoring app such as Ampere; you can compare the different charge rates between your standard charger and your new QC one. You will definitely see a difference.
Click to expand...
Click to collapse
Wait, you said flashing that zip should bring QC2.0 to any Z2 but in Jackos thread he said there has to be based on AndroPlus kernel, which has lost support for MM. Will it be functional, still, when I want to apply this trick on MM?
Sent from my Sony D6503 via Tapatalk
Read further down Jackos first post....
Flashing only the zip and using a Qualcomm QC compatible charger will give you a charging boost equivalent to approx. 60% of the QC 2.0 standard.
Remember, it's a hack to give partial QC 2.0 charging capability.
See my post on the last page of that thread.
rubiicon59 said:
Read further down Jackos first post....
Flashing only the zip and using a Qualcomm QC compatible charger will give you a charging boost equivalent to approx. 60% of the QC 2.0 standard.
Remember, it's a hack to give partial QC 2.0 charging capability.
See my post on the last page of that thread.
Click to expand...
Click to collapse
Does that imply that we will never get QC2.0 onto our Z2 UNLESS someone port a AndroPlus-liked QC2.0 enabled kernel for Z2 on MM?
First pic - Sony EP880 charger (supplied with Z2)
Second pic - dodocool DA56WUK QC 3.0 charger
Screenshots using Ampere app.
rubiicon59 said:
First pic - Sony EP880 charger (supplied with Z2)
Second pic - dodocool DA56WUK QC 3.0 charger
Screenshots using Ampere app.
Click to expand...
Click to collapse
Bro? Can you make a video if you have time how long it takes you quick charger 3.0 to charge from 0 to 100%. Or how much it chargers in 1.5 hrs from 0. When you are free please?
iXaidyiu said:
Does that imply that we will never get QC2.0 onto our Z2 UNLESS someone port a AndroPlus-liked QC2.0 enabled kernel for Z2 on MM?
Click to expand...
Click to collapse
Full QC 2.0, I doubt it.
Partial QC 2.0, as we have now with Jackos zip, is much faster than standard charging so I'm quite happy as it stands.
---------- Post added at 04:58 AM ---------- Previous post was at 04:49 AM ----------
No way do I have time to make a video....
But as my post on the hack thread says, for a 0-to-100% charge the Sony took approx. 3.5 hours.
With the dodocool it takes approx. 2 hours.
Thats good enough for me
Is the battery drain more while using Qc hack?
Nope. There's absolutely no reason why it should be.
Please post the links from Amazon India or Flipkart for the alternative Charger as my original one got burnt.
Can we use Oneplus 3 charger? Or something like that?
I bought ERD 2Amp charger + typeC cable from local shop at cost of 250rs, using it from past 5 months, still not a single issue faced, fast charging and data transfer both are working good
Can anyone suggest some charger which we can get online??
Buy Mi charger and Amazon basics type C cable. They'll do.
Guys I have purchased Flipkart 2.0 fast charger. Works better than the original one.
Can u post the link? Is it supporting fast charging ?
---------- Post added at 04:36 AM ---------- Previous post was at 04:35 AM ----------
VeerAmrit said:
Guys I have purchased Flipkart 2.0 fast charger. Works better than the original one.
Click to expand...
Click to collapse
Can u post the link and does us support fast charging?
[email protected] said:
Can u post the link? Is it supporting fast charging ?
---------- Post added at 04:36 AM ---------- Previous post was at 04:35 AM ----------
Can u post the link and does us support fast charging?
Click to expand...
Click to collapse
http://fkrt.it/KaVkQTuuuN
Yes it does fast charging. It does better than the original charger. Please note it that the cable doesn't includes usb 3.
VeerAmrit said:
Guys I have purchased Flipkart 2.0 fast charger. Works better than the original one.
Click to expand...
Click to collapse
VeerAmrit said:
http://fkrt.it/KaVkQTuuuN
Yes it does fast charging. It does better than the original charger. Please note it that the cable doesn't includes usb 3.
Click to expand...
Click to collapse
Then which cable are you using? Because I tried many cables with the original charger and the charge time is varying extremely...
Please suggest me a cable too...
[email protected] said:
Then which cable are you using? Because I tried many cables with the original charger and the charge time is varying extremely...
Please suggest me a cable too...
Click to expand...
Click to collapse
I'm using the original cable provided by Lenovo. And the charging adaptor of Flipkart, because they provided the normal cable with it.
https://m.youtube.com/watch?feature=youtu.be&v=LcVwD4TRYmw
Try this man, this is awesome
This might be the wrong section (if so please feel free to move it to the correct spot) just curious if anyone has a found a 3rd party 65w charger that works with this phone and gives the same charging speed as well as if there is a longer alternate cable that works? Just curious if there are any options I can have as a back up in case something happens and a longer cable since the one that comes with the phone is incredibly short.
and on top of that i am wondering if the supplied charger can charge my laptop.
anyone tried?
---------- Post added at 04:27 PM ---------- Previous post was at 04:15 PM ----------
Cammarratta said:
This might be the wrong section (if so please feel free to move it to the correct spot) just curious if anyone has a found a 3rd party 65w charger that works with this phone and gives the same charging speed as well as if there is a longer alternate cable that works? Just curious if there are any options I can have as a back up in case something happens and a longer cable since the one that comes with the phone is incredibly short.
Click to expand...
Click to collapse
maybe
---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------
[/COLOR]
Cammarratta said:
This might be the wrong section (if so please feel free to move it to the correct spot) just curious if anyone has a found a 3rd party 65w charger that works with this phone and gives the same charging speed as well as if there is a longer alternate cable that works? Just curious if there are any options I can have as a back up in case something happens and a longer cable since the one that comes with the phone is incredibly short.
Click to expand...
Click to collapse
maybe this will work
but
I'm curious about this as well. I've got a 60w charger that the phone says is quick charging but not hyper charging and looking on giztop.com you get this warning at the bottom.
I've got a 65w charger coming today so I can test it and see but I'm not sure if other cables will work so far.
Cammarratta said:
I'm curious about this as well. I've got a 60w charger that the phone says is quick charging but not hyper charging and looking on giztop.com you get this warning at the bottom.
I've got a 65w charger coming today so I can test it and see but I'm not sure if other cables will work so far.
Click to expand...
Click to collapse
the original charger says 11v at 6A for 66w and 20v at 3.25A for 65w
not sure which output the phones selects
I've go a Baseus 65W Fast Charger. Tested it with a 100W USB C Cable but it's charging only with 18W.
I also asked the Black Shark Support if they offer a spare charger but they said I have to look on Aliexpress lol.
My phone is hyper charging at 11V with around 5A.
I'm also looking for a extra EU charger. The one with Mi 10 Pro (MDY-11-ED) should also work, but i can't find it.
WhySoSeriousJoKer said:
I'm also looking for a extra EU charger. The one with Mi 10 Pro (MDY-11-ED) should also work, but i can't find it.
Click to expand...
Click to collapse
it's very hard to get one at 11v and 6A combination.
i brought a 65w charger but hasn't arrived yet
jananan said:
it's very hard to get one at 11v and 6A combination.
i brought a 65w charger but hasn't arrived yet
Click to expand...
Click to collapse
I tried many chargers, but still no luck. The ones i tried are:
Huawei 65w
Xiaomi 65w (the laptop model)
65W Oppo
65W Realme
Baseus 65w
Choetech 61w
Guess the only way is to buy an original Chinese charger with eu adapter on AliExpress.
Giztop.com has them and usually takes less shipping than alliexpress. Just a shame that you can't use an alternate one with it. Boo.
Will hyper charging work with this charger on the Black Shark 3 Pro?
https://www.powerplanetonline.com/charger-xiaomi-mi-65w-fast-charger-gan-tech