hello, my Motorola Atrix 4G got this boot looping problem, after i installed a previus rom update "Neutrino rom v2.2 GT+" from "Neutrino rom v2.5p GT+" my phone just got into boot loop after rebooting from recovery mode.
The reason for installing the previous version of Neutrino rom, was because after applying the new Rom update (v2.5p) it could not read my SimCard, tryed to take battery out, did not work. Then i installed the older version. But seems like i when in a loop.. ddaanm
I have been on computer 6 hours of researching how to fight this problem. So what i found it, is that i have to Full Wipe my data with Fastboot, then re install the Neutrino Rom.
But here comes a new problem... My computer, and my other computer, cannot install the Fastboot driver! well.. there did not appear any driver update when connecting usb. And on my computer, it said installing driver FAILED!..
So i can't come on Fastboot!!! (Sad Face)
Edit: Okay, so now i got a even bigger problem.. My battery is dead, and ofcouse, it wont charge couse of the boot looping.. And i live in Denmark where they DOES NOT sell motorola atrix... so it would be hard to find some one with the same battery
I dont know whats wrong.... please heelp me!
i have same problem
bootloop after update new cm7 mod
please help
Y you need to make sure you have the latest moto driver for the atrix. (do some searching i belive there is a link in the noob guide) and the fast boot package for your computer (also a lin in the noob guide) then you have to boot to fast boot the in CMD browse to your folder with the fastboot files and run these commands
fastboot -w
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot rebooten back in to recovery to flash your ROM
As far as your battery issue man you might be able to find a external charge online pretty cheap ius have herd of others useing them
Phone Fixed
Okay, so i fixed my phone for some weeks ago. What i did was, i found out of a way to charge the phone, using an usb cable. Then after getting the power on my phone back, i downloaded the motorola atrix driver from somewhere in xda-developers. After installed the driver, i could have acces to fastboot CMD on my computer. So i full wiped everything, and flashed android recovery (red color) on the phone, and installed my Rom .ZIP file, i had on my Micro SD Card. and then, rebooting and phone is back!
Pbwizkid said:
fastboot -w
fastboot erase boot
fastboot erase system
fastboot erase userdata
fastboot erase cache
fastboot erase webtop
fastboot erase preinstall
fastboot rebooten back in to recovery to flash your ROM
Click to expand...
Click to collapse
fastboot -w does same as fastboot erase userdata and fastboot erase cache
RedWildCat said:
Okay, so i fixed my phone for some weeks ago. What i did was, i found out of a way to charge the phone, using an usb cable. Then after getting the power on my phone back, i downloaded the motorola atrix driver from somewhere in xda-developers. After installed the driver, i could have acces to fastboot CMD on my computer. So i full wiped everything, and flashed android recovery (red color) on the phone, and installed my Rom .ZIP file, i had on my Micro SD Card. and then, rebooting and phone is back!
Click to expand...
Click to collapse
Sorry to revive a dead form but how did you charge it externaly because i have this issue now :// But i flashed a diffrent rom
heyhey24 said:
Sorry to revive a dead form but how did you charge it externaly because i have this issue now :// But i flashed a diffrent rom
Click to expand...
Click to collapse
Well, get a USB Cable, cut it over, u will proberly see 5 wires, cut 3 of them, so u have red and black!
Then put the red and black wire to + and - on the phone, plug the battery in phone, then put your USB I/O into your computer, or your power adapter (i dont recommend this! High energy power!) When u have done this right, then let your phone charg for like... 10 min or something and see if it will open, if it does, let it stay there for 30 min or something, if it does not, then make sure u got + and - plugged right, or else try to switch + and -
Warning, dont let + and - touch eatchother
And dont touch + and - on the usb cable!
Related
Phone: LG p500
Rom: CM9 (arjen nightly)
Kernel: Default
Apps2SD: [MOD] Move to sd-ext | Simple app, private-app and Dalvik cache to SD solution
2 days ago, my phone gave me like 8 force close in row, so i decided to pull out battery and reboot. Next time i rebooted it got to eternal loop. I wipe dalvik - reboot - nothing, wiped factory reset and got error while erasing things in SD (android secure, ext, etc) i tried to flash a rom and surprise! my phone got error with "Can't mount /dev/block/mmcblk0p1" tried other SD including a new one, a just format card and nothing. Read in the internet that could be an issue that sd wasn't recognized and that could be fixed in fastboot. Entered fastboot and placed these lines
fastboot oem rebootRUU
fastboot oem enableqxdm
But fastboot won't execute them, just gives me "..." after whatever line i write and i have to pull out battery enter again to try again.
I'm now down to discovering why doesn't fastboot isn't executing my commands, as for recovery, i'm unable to flash anything without my sd being recognized. I also thought of flashing stock rom through emergency mode, but don't know why i'm unable to get into that mode with the 2 button combo (Volume up + return) while connecting usb. The result is just getting into eternal loop on the android text logo
Any help that you could give me i would be really pleased,
thanks for your time and sorry for my spelling i'm not an english native speaker
Why dont search a litle bit
http://forum.xda-developers.com/showthread.php?t=1811650
Edit sorry you cant enter emergency mode try see if lgmdp detects your phone while stuck in android
Press thanks if it help you
Try this if LGMDP detect phone i give you all the files needed to flash by lgmdp
http://forum.xda-developers.com/showthread.php?p=29262689
Sent from my MOMO9 using XDA Premium HD app
thx for the help i dont know how magicaly today after days of trying i could magically get into emergency mode on a friends computer, and managed to install 2.3 stock rom. The problem is now that i still can get sd cards to be recognized, but will keep searching for an answer. I'll have to enable fastboot on my device to try again the
fastboot oem enableqxdm 0
any clue on how to get fastboot with out flashing anything? (i'm unable cause sd is unaccesible from any place)
EDIT: Just realized that i wont be able to root with out sd, any workaround?
I have two identical nexus s phones.
Phone 1:
- has no usb connectivity, and thus can't be used with fastboot or adb
- unlocked bootloader
- stock jellybean
Phone 2:
- rooted
- has CWM 6.0.3.1 installed
- stock jellybean
I've taken a backup of phone 2 and want to flash it using the stock recovery on phone 1. I'm on OS X.
I've found a couple threads on this but they're all leading to dead ends. One used a utility called unyaffs, but the CWM file format has changed to use hashed blobs so that 's not going to work.
I've also seen a couple posts saying that CWM had a "soon to be released" option to create an update.zip file, but I don't see that option. Those posts are from last August. That sounds great if it existed and the image could be used with stock recovery.
All I really need to do is flash the bootloader from phone 2 on to phone 1 (I previously flashed the wrong bootloader on phone 1 which led to the loss of usb, which is what I'm trying to fix.) I tried zipping the correct bootloader image from the google download page and installing from stock recovery but it refuses to flash that image. (Not sure if fastboot images can be flashed in recovery mode?)
Argh, need a little help here.
Thanks in advance.
slide mon said:
I have two identical nexus s phones.
Phone 1:
- has no usb connectivity, and thus can't be used with fastboot or adb
- unlocked bootloader
- stock jellybean
Phone 2:
- rooted
- has CWM 6.0.3.1 installed
- stock jellybean
I've taken a backup of phone 2 and want to flash it using the stock recovery on phone 1. I'm on OS X.
I've found a couple threads on this but they're all leading to dead ends. One used a utility called unyaffs, but the CWM file format has changed to use hashed blobs so that 's not going to work.
I've also seen a couple posts saying that CWM had a "soon to be released" option to create an update.zip file, but I don't see that option. Those posts are from last August. That sounds great if it existed and the image could be used with stock recovery.
All I really need to do is flash the bootloader from phone 2 on to phone 1 (I previously flashed the wrong bootloader on phone 1 which led to the loss of usb, which is what I'm trying to fix.) I tried zipping the correct bootloader image from the google download page and installing from stock recovery but it refuses to flash that image. (Not sure if fastboot images can be flashed in recovery mode?)
Argh, need a little help here.
Thanks in advance.
Click to expand...
Click to collapse
ok your post isnt making sense. first of all how did you flash thethe wrong bootloader to phone 1? and when you compare the phones bootloaders, what is the bootloader version number for each one? so what youre saying is that phone 1 will never give you an adb connection at all, even when youre booted into android? when you plug phone 1 into the computer from within android what happens? and when you boot phone 1 into bootloader and execute fastboot mode then connect it to your computer do you see anything when you run the command ./fastboot devices? or ./adb devices when youre in adb mode on your phone? if your computer can see phone 2 and not phone 1 at all via usb then there is likely a problem with the usb port on your phone 1. you should be able to boot directly into fastboot mode by holding vol up and power button while powering on the phone, then it should take you straight to fastboot mode where you can then connect to the computer. remember to put the phone in fastboot mode then connect sometimes the computer wont see the phone if it was already plugged in upon entering fastboot mode/
haxin said:
ok your post isnt making sense. first of all how did you flash thethe wrong bootloader to phone 1? and when you compare the phones bootloaders, what is the bootloader version number for each one? so what youre saying is that phone 1 will never give you an adb connection at all, even when youre booted into android? when you plug phone 1 into the computer from within android what happens? and when you boot phone 1 into bootloader and execute fastboot mode then connect it to your computer do you see anything when you run the command ./fastboot devices? or ./adb devices when youre in adb mode on your phone? if your computer can see phone 2 and not phone 1 at all via usb then there is likely a problem with the usb port on your phone 1. you should be able to boot directly into fastboot mode by holding vol up and power button while powering on the phone, then it should take you straight to fastboot mode where you can then connect to the computer. remember to put the phone in fastboot mode then connect sometimes the computer wont see the phone if it was already plugged in upon entering fastboot mode/
Click to expand...
Click to collapse
I was trying to downgrade the phone to ICS using the factory image from google. I picked the wrong image from the google site (picked soju, needed sojus) and flashed it using fastboot. As soon as I flashed the wrong bootloader the USB connection stopped working so I didn't flash the radio or os. I no longer can connect to the phone using fastboot or adb, usb debugging stopped working. The USB debugging option is set in developer options. So, trying to get the phone working now without USB. Hope that makes sense now. :good:
Hello,
a few weeks ago i flashed cwm and cyanogenmod 10.2 nightly to my L9. I wanted to use Link2SD to move some apps from internal memory, so i had to repartition the sd-card. Unfortunaly the phone would not let me remove the sd-card (seems like it is stuck because the eject-mechanism is not working). So i tried to repartition the memory with Aparted from within the phone and of course i accidentally removed the phones internal partition, instead of the sd-card partition. Now the phone won't respond to almost anything i have tried. That includes:
- turning the phone on
- booting to recovery
- s/w upgrade mode
With Lelus tool i am able to get a fastboot connection, it even looks like i am able to flash another recovery image (i have the omap drivers still installed from flashing the phone the first time). But in the end the phone itself does not respond to anything. When trying to install ics x and u boot with Lelus script it fails after complaining about a missing partition.
Do you know another way to restore internal partition(s)? Is there any hope to get the phone working again?
Thank you in advance
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
tawhid111 said:
if all fails try this you may get lucky
http://forum.xda-developers.com/showthread.php?t=2546571
Click to expand...
Click to collapse
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
kidCurly said:
Thanks a lot! Looks like LG Support Tool recognizes my phone now (there is no visual feedback on the phone screen in S/W Upgrade right?) But when i start to use the tool to recover from a failed upgrade, it always skips around 20-25% progress. For a moment the phone is not shown in my windows device manager and after that, it is recognized as Ti Board - Omap44xx every few seconds and then lost again, like the driver is not properly installed (is that possible after being able to get to fastboot and S/W Upgrade mode?). Any idea?
Click to expand...
Click to collapse
The s/w mode from the unofficial fastboot is not going to work. I think you really messed up your phone doing that (aparted). You might be able to run a fastboot command to repartition it but I doubt it will work. Try this command select option 1 (just fastboot)
fastboot devices
fastboot oem format
You should have a look at this information as well http://www.omappedia.com/wiki/Android_Fastboot
Sent from my LGMS769 using XDA Premium 4 mobile app
my phone just LOGO,, try update offline error 4%
then i try with fastboot:
fastboot devices
fastboot erase u-boot
fastboot erase boot
fastboot erase recovery
fastboot flash u-boot 2.img
fastboot flash boot 3.img
fastboot flash recovery 4.img
now phone is dead,, i se on device manager omap4430 fastboot usb device only connect then disconect continuesly...
please helpp,,, #cry
This should help you fix it: http://forum.xda-developers.com/showthread.php?t=2119090
It will give you fastboot access again so you can flash the correct files.
I love omap devices, they seem to be difficult to hard brick with the exception of the high security models.
Sent from my Amazon Tate using Tapatalk
*im not developer, neither noob i just like to share what I know*
Maybe this is a noob guide, but i did my best to share something helpful
before you go deeper, be sure to check your phone able to get into fastboot mode. If you cant, use REAL unbrick method instead
If your phone soft or hard bricked, bootloop, stuck on logo etc you know you are f***ed unless you know what should to do.
Some time ago bootlooped my phone, but i cant go to recovery, cant ADB because I forgot to enable USB debugging, my computer wont recognize my phone poperly because my phone mad at me, and my phone flickering like hell *party hard*. Maybe this is a brick not bootloop but whatever
Good friend of mine tell me what should to do
What you need:
Working PC with minimal ADB and fastboot installed //see the thread here, your phone's USB and ADB driver installed //download here if you dont have it
Working USB DATA cable
Custom recovery everything will do, as long as its compatible with your current android version. Rename the img to recovery.img
ROM you prefer everything will do, as long as its compatible with your current android version. Move to your SD Card
The power of will
Step:
1. Make sure your phone is turned off
2. Boot into fastboot mode, you will see some chinese message
3. Plug your phone to to your PC
4. Check if your PC at least know that you are pluged in your phone (check via device manager by 'plug and un-plug' your phone and check for 'appear and disappear' device , mine listed as it is was a modem.)
5. Move the recovery.img inside minimal adb and recovery folder root usually under c:/programfiles directory
6. Run the minimal adb and fastboot, check your device by using /adb devices/ command without backslash
7. If your device is not listed, dont worry. We still able to use the fastboot
8. Boot your phone into recovery mode by using /fastboot boot recovery.img/ command without backslash
9. Wait for few secs, and your phone should touched down to recovery mode.
10. Do wipe (data, dalvik, cache, system, internal)
11. Flash your prefered ROM
12. ..........???
13. Profit
Troubleshooting:
If your PC unable to recognize your phone completely, try using another usb cable, usb ports, uninstall-reinstall, plug-unplug, and make sure your phone in fastboot mode before you plug your phone to the PC.
Feel free to critics, I hope this helped you :fingers-crossed:
Thank you for all who helped me making this post.
McBubu_1337 said:
*im not developer, neither noob i just like to share what I know*
Maybe this is a noob guide, but i did my best to share something helpful
before you go deeper, be sure to check your phone able to get into fastboot mode. If you cant, use REAL unbrick method instead
If your phone soft or hard bricked, bootloop, stuck on logo etc you know you are f***ed unless you know what should to do.
Some time ago bootlooped my phone, but i cant go to recovery, cant ADB because I forgot to enable USB debugging, my computer wont recognize my phone poperly because my phone mad at me, and my phone flickering like hell *party hard*. Maybe this is a brick not bootloop but whatever
Good friend of mine tell me what should to do
What you need:
Working PC with minimal ADB and fastboot installed //see the thread here, your phone's USB and ADB driver installed //download here if you dont have it
Working USB DATA cable
Custom recovery everything will do, as long as its compatible with your current android version. Rename the img to recovery.img
ROM you prefer everything will do, as long as its compatible with your current android version. Move to your SD Card
The power of will
Step:
1. Make sure your phone is turned off
2. Boot into fastboot mode, you will see some chinese message
3. Plug your phone to to your PC
4. Check if your PC at least know that you are pluged in your phone (check via device manager by 'plug and un-plug' your phone and check for 'appear and disappear' device , mine listed as it is was a modem.)
5. Move the recovery.img inside minimal adb and recovery folder root usually under c:/programfiles directory
6. Run the minimal adb and fastboot, check your device by using /adb devices/ command without backslash
7. If your device is not listed, dont worry. We still able to use the fastboot
8. Boot your phone into recovery mode by using /fastboot boot recovery.img/ command without backslash
9. Wait for few secs, and your phone should touched down to recovery mode.
10. Do wipe (data, dalvik, cache, system, internal)
11. Flash your prefered ROM
12. ..........???
13. Profit
Troubleshooting:
If your PC unable to recognize your phone completely[B/], try using another usb cable, usb ports, uninstall-reinstall, plug-unplug, and make sure your phone in fastboot mode before you plug your phone to the PC.
Feel free to critics, I hope this helped you :fingers-crossed:
Thank you for all who helped me making this post.
Click to expand...
Click to collapse
Good work bro
The Hard Gamer said:
Good work bro
Click to expand...
Click to collapse
Thanks, its noob post so i dont expect anything special
McBubu_1337 said:
Thanks, its noob post so i dont expect anything special
Click to expand...
Click to collapse
It is a good help to those who are new to getting bricked
It shows waiting for device
Tommen1998 said:
It shows waiting for device
Click to expand...
Click to collapse
You may need to check some things:
Your PC actually know that you have inserted your phone. It doesn't have to know it's a phone (so it can be detected as unknown device or something similar, mine is detected as a modem)
Your phone is indeed in fastboot mode, you can tell yours is in fastboot mode by a Chinese message at the bottom of the screen
Change your cable data, make sure it is a cable data, not a normal charging cable
let me know if you need some help
McBubu_1337 said:
You may need to check some things:
Your PC actually know that you have inserted your phone. It doesn't have to know it's a phone (so it can be detected as unknown device or something similar, mine is detected as a modem)
Your phone is indeed in fastboot mode, you can tell yours is in fastboot mode by a Chinese message at the bottom of the screen
Change your cable data, make sure it is a cable data, not a normal charging cable
let me know if you need some help
Click to expand...
Click to collapse
Hello. I Tried a lot, but my PC doesn't recognise my phone. The phone is in fastboot mode. I've tried by changing cables too
same issue
Tommen1998 said:
Hello. I Tried a lot, but my PC doesn't recognise my phone. The phone is in fastboot mode. I've tried by changing cables too
Click to expand...
Click to collapse
I am also getting the same issue tried different cables but not working. Anyone please help me
The same issue. I think it's about getting it recognized in Fastboot mode. It's recognized in Android but not in Fastboot. All new devices are installed including those you get in Diagnostic 9091 mode (Power+V+). What do I need for Fastboot mode?
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
samhot66 said:
Hi everybody,
Sorry if my post already exists and if my english is bad but i really need help...
I tried to root my honor 7 so first i unlocked bootloader successfuly, i installed TWRP too and everything seemed work very good until last step where my phone didn't boot, i stayed stuck in boot logo... Then I done a factory reset with wipe cache, dalvik, data etc...
Now the only things i'm able to do are boot on recovery mode, eRecovery and on fastboot&rescue mode. I lost adb and fastboot and i'm not able to acess to the phone so i can't put a rom on the phone to install it...
If anyone could help me it would be very nice because I'm going crazy. Thank you !
My phone was up-to-date, i can't remember witch firmware i had but i think it was Android 6.0.1
Click to expand...
Click to collapse
You didnt make any twrp backup??
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Rayan19997 said:
If you have fastboot you can use Huawei update extractor to extract UPDATE.APP and flash boot.img and system.img directly to your device
Click to expand...
Click to collapse
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
samhot66 said:
Thank you for your reply. I'm able to enter in fastboot, i extracted boot.img and system.img from UPDATE.APP but i don't know what you mean by flash them because i have no link between the phone and the computer. I can't write on the phone, HiSuite tells that the phone is disconnected and explorer doesn't display the phone neither...
Click to expand...
Click to collapse
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
I'm glad to see that you succeeded bro :cyclops:
how can u flash with fastboot while no connection to pc
samhot66 said:
OK it's good it works
I flashed with fastboot in command line and the reboot was magnificient !
Thank you !!!
Click to expand...
Click to collapse
how can u flash with fastboot while no connection to pc (as u said earlier)
if u did manage to connect to pc, please share how
thanks in advance
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
samhot66 said:
I'm not sure I understand the question but i'll try to explain.
I was not able to connect to PC apart with fastboot (reboot in fastboot mode and connect to PC). Once done, just open a terminal and type "fastboot flash boot <boot image file name>.img" then do the same with IMG (as said in this page .
Hope it will help you !
Click to expand...
Click to collapse
Read this carefully, this will restore youre phone:
1*.)No matter what youve done with this phone it will be cleanly installed like its fresh new, cause i had couple of problems and this method worked
1.)Download the latest b396 firmware
2.)format youre SD card with basic settings via Windows ( if you have a usb stick to connect youre SD card to computer like i do, if you cant connect youre SD card to computer, use another smartphone and format youre SD card with basic settings)- simply talking just format youre SD card
3.)create --->>>dload<<<--- folder like i wrote down without the --->>><<<--- stuff on youre SD card
4.)paste the update.app file to the dload folder
5.)insert youre SD card to phone
6.)this is the moment of truth hold down volume + & - key and power key all in once until the emui logo appears WARNING: remove all keys after logo appearing WARNING: if the logo doesnt appear even after 30sec. keep still holding until the logo appears
***If you get somekind of error i can help, if it worked youre a lucky guy