So... Uhhh... Sorry for posting here! I saw the video "you're a noob" and got a little scared of posting here. But its almost 3 days without my phone, so I'm a bit of desperate! >>"
So, I got a X10a, and it was with 2.1 until yesterday. I've taken courage and was going to upgrade to 2.3. Pulgged the phone, downloaded the PC Companion, begin the upgrade. Everything went ok. Then I got in the bootloop. Panic at frist the I started to look for some solution. I flashed to 2.3 x10i generic using Flashtools. Still on bootloop. Flashed to 2.1 using flashing tools, still no good. Tryed to repair with PC Companion, no good. Flashed and flashed and flashed, tryed and tryed to repair and nothing. Still on bootloop, I just can't figure out what I can do! Even formating the SD I tryed, and nothing!
So, anyone can help me? I really need help here, I just can't find anything to help me!
Thank you very much! =)
Sorry for my bad english! =/
Try to flash the ROM 2 times with SEUS if it won't work by the first time. I had such a problem once. If it won't help try to flash this ROM via flashtool, and after that just normally (using SEUS) flash to stock 2.3.3.
Good luck
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
dd4nt388 said:
About SEUS... Can I use PCC repair? Like I can't find a SEUS working, it says "Failed checking application versions, please reinstall the application and make sure you have the latest version".
And THANK YOU SO MUCH for the quick answer!! I'm kinda morning my phone here!
I'm downloading the FM you just posted! =)
Click to expand...
Click to collapse
Yes You can use PCC
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
dd4nt388 said:
No dice! =/
Find the SEUS working, flashed twice, nothing.
Flashed the FM you linked, nothing. Flashed once with SEUS on top of it nohting, twice nothing still!
Please! Tell me that my phone its not dead! u.u
Click to expand...
Click to collapse
try flashing this 2.1 if it works.
http://www.mediafire.com/?sqv6274anzfzn2x
mirajp1 said:
try flashing this 2.1 if it works.
Click to expand...
Click to collapse
No dice! =/
Tried another cable but still no go...
Don't know what to do anymore... Everything I read say that flashing should resolve... But still don't work
Anyone got a 1.6 Stock so I can try it? Can't find a working link.
did you try rooting your phone with flashtool and install xrecovery?
you can try that might work
The phone does not start... I think for me to root and instal xrecovery I need it to be functional, right?
I have another suggestion. Have u tried flashing another baseband? one that you're sure matchs the rom you flash? If your baseband is wrong installed ROM will be stuck forever.
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
dd4nt388 said:
Sorry, but I don't understand much about baseband. Can't find a easy understanding guide. My phone is from Brazil the company is VIVO. Can you explaim for me? Or show a good guide of it please?
Thank you! =)
EDIT: So, I found a 1.6 and flashed (Old stuff, Cmd). Now here is the diference, after 1.6 I try to turn on my phone and nothing happens, just the green let flash for like 0.5 secs.
When I try to upgrade to 2.1 by flashtool it turn on the screen but just that, no se logo or nothing, and it flicks from time to time.
When flahsing from SEUS I got the same stuff for 2.1.
Got a baseband 52, 54a, 55a and 49i. All I could find in the internet.
Baseband 52, 54a, 55a and 49i no good in SEUS flash.
With generic 2.1 from jakuburban: Tried 54i, 58i and 49i.
No dice... For Crist sake I'm kinda desperate right now!!! >>""""""""""""""""
Click to expand...
Click to collapse
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
kalte said:
To flash the baseband's use flashtool (can be downloaded on dev's section). I don't remember what baseband goes with each system version. I can only tell that 2.1.71 only works with Android 2.3.X
PS: finally found the baseband thread, where more detailed info is available: Baseband
Click to expand...
Click to collapse
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
dd4nt388 said:
No dice! =/
Sorry for the late response, but got no time to spent with the phone.
Flahsed 3.0.1.G.0.75 with 2.1.71. No good! =/
I think I'll just run the repair and send to SE for repair, and be without my phone for 4 months! >>"
Click to expand...
Click to collapse
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
laneyofdeath said:
Which version of build .75 did u grab? Did u use global generic?
Sent from my X10i using XDA
Click to expand...
Click to collapse
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
black screen, unable to boot
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
devendra.sobhani said:
I tried to install xrecovery, but my device got stuck and now there is black screen..... when I try to flash it, following is what appears on the flashtool
Please help
30/005/2012 08:05:30 - INFO - <- This level is successfully initialized
30/005/2012 08:05:30 - INFO - Flashtool Version 0.6.8.0 built on 2012-02-26 19:26:25
30/005/2012 08:05:30 - INFO - You can drag and drop ftf files here to start flashing them
30/005/2012 08:05:35 - INFO - Device disconnected
30/005/2012 08:05:48 - INFO - Device connected in flash mode
30/006/2012 08:06:08 - INFO - Selected X10_V1_BLRelock.ftf
30/006/2012 08:06:08 - INFO - Preparing files for flashing
30/006/2012 08:06:08 - INFO - Please connect your device into flashmode.
30/006/2012 08:06:08 - INFO - Opening device for R/W
30/006/2012 08:06:08 - INFO - Reading device information
30/006/2012 08:06:08 - INFO - Start Flashing
30/006/2012 08:06:08 - ERROR -
30/006/2012 08:06:08 - ERROR - Error flashing. Aborted
30/006/2012 08:06:09 - INFO - Device connected in flash mode
My device was on gingerbread 2.3.3, stuck from 3 days....
Can anybody tell me what to do in order to recover.... any help will be greatly appreciated
Click to expand...
Click to collapse
Did you try using different computer????
once i got stuck with same at the time of unlocking bootloader and i resolve it by using different computer
Click to expand...
Click to collapse
try it it might help........
So, I was calling some guys who make box flash in my city. Some said that might be necessary to flash or something by solder(???) I wanna know if it compensate to make box flash, and if really exist this solder procedure.
Thanks! =)
phone restarting again and again
I used sony ericsson update service and it worked.... got gingerbread 2.3.3 again but the phone is restarting again and again.....
I think its the issue with battery...
Please let me know if there's something else i need to do....
thanks in advance
dd4nt388 said:
This is the file name. X10i_3.0.1.G.0.75_1241-1846.
When I downloaded said to be global generic. I got a X10a_3.0.1.G.0.75_AMERICA-US GENERIC 1233-8200 here... Should I try with the 2.1.71?
Click to expand...
Click to collapse
Are u using a X10a or a X10i ?
I think it's X10a for your country (not sure but...)
So the baseband might be 2.1.65 or 2.1.54... 2.1.71 is for X10i according the baseband thread...
HERE is a thread with most of firmware
Related
Please help me I do not know how to do .. I stuck on the cell is written with white Sony Ericsson PC Companion Seus that when I go to repair Seus tells me no updates available and it makes me get out while PC Companion software tells me this is currently not available for 1 week! how can I do? this has happened since I formatted via xrecovery do not know how that could happen ... You are my only hope. But a question ... If you did not put the solution if I bring it in for service (vodafone) they realize it? I had installed only a simple rom that brought the issue to Android 2.3. Thanks in advance and excuse my English I'm Italian on the forums, unfortunately nobody has been able to respond and they told me that you are the expert, the cell I just did not know then of your life ^^'
sorry cell = phone
zanzara said:
Please help me I do not know how to do .. I stuck on the cell is written with white Sony Ericsson PC Companion Seus that when I go to repair Seus tells me no updates available and it makes me get out while PC Companion software tells me this is currently not available for 1 week! how can I do? this has happened since I formatted via xrecovery do not know how that could happen ... You are my only hope. But a question ... If you did not put the solution if I bring it in for service (vodafone) they realize it? I had installed only a simple rom that brought the issue to Android 2.3. Thanks in advance and excuse my English I'm Italian on the forums, unfortunately nobody has been able to respond and they told me that you are the expert, the cell I just did not know then of your life ^^'
Click to expand...
Click to collapse
if you can not do a repair by SEUS/PC Companion, try using Bin4ry's flasher. look it up around here, and try to reflash your phone using that.
necrohades said:
if you can not do a repair by SEUS/PC Companion, try using Bin4ry's flasher. look it up around here, and try to reflash your phone using that.
Click to expand...
Click to collapse
17/038/2011 16:38:44 - INFO - <- This level is successfully initialized
17/038/2011 16:38:58 - INFO - Preparing files for flashing
17/039/2011 16:39:04 - INFO - Searching Xperia....
17/039/2011 16:39:05 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&1452FD19&0&2
17/039/2011 16:39:05 - INFO - Start Flashing
17/039/2011 16:39:10 - ERROR - Error flashing. Aborted
17/039/2011 16:39:10 - INFO - Now unplug the device and power it on
17/039/2011 16:39:10 - INFO - Then go to application settings
17/039/2011 16:39:10 - INFO - turn on Unknown Sources and Debugging
This is error help me ç_ç
i tried flashing my X10 mini pro using Flashtool, but got this error:
Code:
02/006/2011 03:06:30 - INFO - Searching Xperia....
02/006/2011 03:06:30 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&11AE52C9&0&4
02/006/2011 03:06:30 - INFO - Start Flashing
02/006/2011 03:06:31 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
02/006/2011 03:06:31 - INFO - Flashing loader
02/006/2011 03:06:31 - ERROR - Error flashing. Aborted
02/006/2011 03:06:31 - INFO - Now unplug the device and power it on
02/006/2011 03:06:31 - INFO - Then go to application settings
02/006/2011 03:06:31 - INFO - turn on Unknown Sources and Debugging
And my phone gets stuck on the white Sony Ericsson screen, so cant change the app settings, nor can i access CWM..
Please help me.. thank you!
did you take off your battery and reboot? which version off flash tool do you have? there are different versions out there http://androxyde.github.com/Flashtool/ is your version similar? i guess you are on stock? i hope this helps. Post more Information if nothing works repair your phone with companion
yes i took off the battery and rebooted.. and the flashtool version is the same as the one you have linked in the above post...
and yes i'm running on stock... phone is rooted..
Are you trying to flash the bootloader without unlocking it or trying to flash an official Sony Ericsson ROM? If you trying to flash the bootloader the 'R8A029' should be 'r8A029' with a lower case 'r', you'll need to use a bootunlocker to do that. (be sure to read the instructions or else you can hard brick your phone!)
Sent from my U20i using Tapatalk
domics said:
if nothing works repair your phone with companion
Click to expand...
Click to collapse
obsidian_eclipse said:
Are you trying to flash the bootloader without unlocking it or trying to flash an official Sony Ericsson ROM? If you trying to flash the bootloader the 'R8A029' should be 'r8A029' with a lower case 'r', you'll need to use a bootunlocker to do that. (be sure to read the instructions or else you can hard brick your phone!)
Sent from my U20i using Tapatalk
Click to expand...
Click to collapse
Thank you both for your replies and giving me more knowledge on flashing androids
But PC companion did the trick for me
Mimmi is back to normal special thanks to domics for suggesting me to use pc companion..
thank you!
Hi,
I have this behavior in my u20i phone that the phone will not boot. When i connect it to my PC, the PC detects the phone momentarily for around 5 seconds and then it disconnects and this will continue until i disconnect it. Does this mean my phone is bricked? Is this what a bootloop is? I read many threads on this forum, and for whoever was facing the problem of bootloop, he was atleast getting SE logo.
Now coming to my problem, i used s1tool to get the present details of my phone and it shows the following:
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "0020/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.1.1.A.0.6
CUSTOM VERSION: 1238-7170_R4B
.
.
SEMC SIMLOCK CERTIFICATE
The loader version tells me that the bootloader is not unlocked. Tried using SEUS update service to fix my phone back, but after completion, i still am stuck with this boot-looping. Any other suggestions? Any more information required to debug my problem? I had installed a custom rom which was working well (MiniCM7Pro_V21) until i restarted my phone which is when i got this problem. (had got a problem like this before but using SEUS had worked that time)
I can enter the flashmode of the phone atleast but thats it (this gives me some glimmer of hope )
My last resort will be to give my phone to the SE service guys but i wanna know what the problem is before i give it to them.
try again using SEUS????
Yashu1019 said:
try again using SEUS????
Click to expand...
Click to collapse
Already tried both SEUS and also using PCCompanion repair option, none of them are working for me...
Looks like a dying post faiyyaz helping out, but has come to a point where hez stuck, but anyway thanks a lot faiyyaz...Man, i just dont wanna give up and give it so SE guys, want to fix it my way...Anyway, any more suggestions will be helpful...
Attaching the messages exchanged:
faiyyaz said:
R[O]K.O. said:
faiyyaz said:
R[O]K.O. said:
Hi, Its regarding a question i posted on xda developers, http://forum.xda-developers.com/showthread.php?t=1518652
Any help would be very much appreciated...
Click to expand...
Click to collapse
bro.. u aren't getting the Sony Ericsson logo when turn on?? n just to clear your confusion your bootloader is locked o no worries of that.. n 2ndly did u try the latest SEUS..? if not give it a try.. if not working PM again .
Click to expand...
Click to collapse
Used SEUS 2.12.3.5, got a successful message at the end, disconnected the phone and started the phone back again, but problem still exists...Any other ideas i can try out?
Click to expand...
Click to collapse
well that's weird.. i think the only way u can get it working is as you can get into flashmode, you can unlock bootloader then flash the nAa kernel as its got inbuilt CWM recovery,so u can get into recovery mode.. then u can flash a custom ROM.. a perfect ROM would be MiniCm7 by nAa itself n then if u want to get back to stock.. u may flash stock kernel.. then relock bootloader n then use SEUS to get back to Stock ROM.. its a long proceduce but i think it shall work.. if any query fell free to ask.hope that helps you
note: Make sure your following proper instructions while unlocking bootloader , use my tool if u want SE Tweaker Tool n follow correct instruction n read its main thread before u use it..
Click to expand...
Click to collapse
faiyyaz said:
R[O]K.O. said:
Oh and 1 more thing, how can i enable USB debugging when i cannot switch on the phone, by any external means possible?
Click to expand...
Click to collapse
Well sorry mate.. But I thought ur usb debugging might be on.. so I guess the unlock bootloader thing wont work for u.. Maybe u should try givin it to the service center if its under gaurante.. Else il see if there is any other way u can through..
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Ticklefish said:
Hmm. Tricky. Have you tried using Flashtool to put a stock firmware back on?
Sent from my U20i using XDA App
Click to expand...
Click to collapse
Just tried it a few mins back, heres what i had on the flashtool disp:
03/030/2012 02:30:56 - INFO - Selected U20i_2.1.1.A.0.6_Baseband_015.ftf
03/030/2012 02:30:56 - INFO - Preparing files for flashing
03/030/2012 02:30:56 - INFO - Please connect your device into flashmode.
03/031/2012 02:31:03 - INFO - Device connected in flash mode
03/031/2012 02:31:03 - INFO - Opening device for R/W
03/031/2012 02:31:03 - INFO - Reading device information
03/031/2012 02:31:03 - INFO - Phone reading for flashing.
03/031/2012 02:31:03 - INFO - Start Flashing
03/031/2012 02:31:03 - INFO - Flashing loader
03/031/2012 02:31:05 - INFO - Loader version : R4A045 / Bootloader status : UNROOTABLE
03/031/2012 02:31:05 - INFO - Flashing amss_fs.sin
03/031/2012 02:31:05 - INFO - Flashing cache.sin
03/031/2012 02:31:06 - INFO - Flashing fota1.sin
03/031/2012 02:31:06 - INFO - Flashing kernel.sin
03/031/2012 02:31:10 - INFO - Flashing amss.sin
03/031/2012 02:31:21 - INFO - Flashing fota0.sin
03/031/2012 02:31:22 - INFO - Flashing finished.
03/031/2012 02:31:22 - INFO - Please wait. Phone will reboot
03/031/2012 02:31:22 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
03/031/2012 02:31:22 - INFO - Device connected in flash mode
03/031/2012 02:31:23 - INFO - Device disconnected
03/031/2012 02:31:25 - INFO - Device connected in flash mode
03/031/2012 02:31:49 - INFO - Device disconnected
03/031/2012 02:31:55 - INFO - Device connected with USB debugging off
Click to expand...
Click to collapse
Tried starting the phone but am having the same problem still...
Have given the phone today to the SE guys, will let you guys knw if it gets fixed or not (they tried updating, said they used some factory sent updater which didn't work after which they said its a hardware issue, which somehow i doubt)...
Got my phone back today and its in good working condition. They said they replaced the flexicable of my minipro which was faulty. Anyway am happy that its working now and am ready to flash a rom into it again Thanks for all your help and suggestions...
In the beginning i must say that i did search around but no solution finded..
So that happened: after i finished call, on my screen appeared that "Androin stopped work" (or something like that) Then i set my phone to REBOOT and phoned turned off but not on. Well i tried it manually but after pushing upper on/off button just short vibrate and nothing, phone remains black. Not even booted to CWM.
Well in similar cases usually i try to reflash kernel or rom via Flashtool or use repair phone option in Sony Update Service and go back to 2.3.
None of that this time worked for me...
Flashtool showed that error:
30/002/2012 11:02:30 - INFO - Opening device for R/W
30/002/2012 11:02:30 - INFO - Reading device information
30/002/2012 11:02:30 - INFO - Phone ready for flashmode operations.
30/002/2012 11:02:30 - INFO - Start Flashing
30/002/2012 11:02:30 - INFO - Processing loader
30/002/2012 11:02:30 - INFO - Checking header
30/002/2012 11:02:30 - INFO - Ending flash session
30/002/2012 11:02:30 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
30/002/2012 11:02:30 - ERROR - Error flashing. Aborted
30/002/2012 11:02:31 - INFO - Device connected in flash mode
30/002/2012 11:02:32 - INFO - Device disconnected
And Sony Update Service says that there is no newest software available for my device..
Im on unlocked BL, Ferakernel 5.1 1Ghz and my device is X10i
Thank You for your suggestions
Remanon said:
And Sony Update Service says that there is no newest software available for my device..
Thank You for your suggestions
Click to expand...
Click to collapse
First, I don't know if we use the same Update Service. Because, in my SEUS also says that there is no newest software available, to be precise: "Your phone already have latest software". But, also says: "If you are experiencing problems with your product we recommend that you re-install the software". And "INSTALL" button shows up in the right-down corner. Click and reinstall Stock Rom. And you are not the only person who complain about this issue with SEUS. Look in pictures, and tell me if it's a same version of SEUS, and does this windows appears in your SEUS.
Here are some screenshot to aprove this claim:
And what version of Flashtool you are using??
Dzufa said:
And what version of Flashtool you are using??
Click to expand...
Click to collapse
Flashtool - i use latest one v0.9.9.0 but also i tryied older one v0.8.6.0
Se attached screenshot
Ok. But did you select X10i, when you prompted by SEUS. Look my screenshot 2. Because, on your screenshot, picture of phone (right-upper corner) is unknown.
Sent from my X10i using xda premium
Dzufa said:
Ok. But did you select X10i, when you prompted by SEUS. Look my screenshot 2. Because, on your screenshot, picture of phone (right-upper corner) is unknown.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Yes, i did select X10 and that is strange coz it didn´t recognize it automatically.
Hi mate, in flash tools did check "no final verifications" its on bottom right before you flash? Because I've just flash firmwares and same thing happen to me. It's fixed by re flashing and check the "no final verication"
teddymild said:
Hi mate, in flash tools did check "no final verifications" its on bottom right before you flash? Because I've just flash firmwares and same thing happen to me. It's fixed by re flashing and check the "no final verication"
Click to expand...
Click to collapse
I i tried like you said. But still the same error..
Hello, I've bought a device which is really hard to repair & I'm running out of options!!! The X10 looks brand new but doesn't boot at all!
Until now I've tried Seus/PcCompanion & latest Flashtool.
What happens when I try to power up the device, it vibrates ones but the screen is just black( think because there isn't any firmware/ Rom on it).
When trying to flash a Generic Rom or any Rom at all it gets into flash mode but aboards the procedure.
I also thought that it might be Sim locked & I have to unlock it to get it repaired?! (tried Omnius tool but that didn't work).
When trying to repair with PcCompanion, while trying to install the update/firmware it cancels by telling me there's been a failure, try again or abort.
The same happens with SEUS!
I've tried both tools at least a dozen times without any success!
I never had problems with my other X10.
I'm starting to think it's hardware related & I'll have to take it to a pro.
If anyone has an idea, I t would really appreciate it, thanks!!!!!
JeySee said:
Hello, I've bought a device which is really hard to repair & I'm running out of options!!! The X10 looks brand new but doesn't boot at all!
Until now I've tried Seus/PcCompanion & latest Flashtool.
What happens when I try to power up the device, it vibrates ones but the screen is just black( think because there isn't any firmware/ Rom on it).
When trying to flash a Generic Rom or any Rom at all it gets into flash mode but aboards the procedure.
I also thought that it might be Sim locked & I have to unlock it to get it repaired?! (tried Omnius tool but that didn't work).
When trying to repair with PcCompanion, while trying to install the update/firmware it cancels by telling me there's been a failure, try again or abort.
The same happens with SEUS!
I've tried both tools at least a dozen times without any success!
I never had problems with my other X10.
I'm starting to think it's hardware related & I'll have to take it to a pro.
If anyone has an idea, I t would really appreciate it, thanks!!!!!
Click to expand...
Click to collapse
i dunno if this can help . but when the vibrate wait like 6-10sec then flip to the right like you wanna look to the volumes buttons if you saw any whiteness in the dark of the screen then the phone cable is working . if it still black the cable might be got broken or something or maybe there is wire that got unplugged from its place
btw i think you better take it to pro
#Sorry for bad english :l
Sent from my Xperia X10 using xda app-developers app
EzzyLupe said:
i dunno if this can help . but when the vibrate wait like 6-10sec then flip to the right like you wanna look to the volumes buttons if you saw any whiteness in the dark of the screen then the phone cable is working . if it still black the cable might be got broken or something or maybe there is wire that got unplugged from its place
btw i think you better take it to pro
#Sorry for bad english :l
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
Thanks, I know what you mean with the whiteness but there isn't, it isn't booting at all & I have those two cables which both work, that can't be it. I think I'll let it get checked by a pro. Your English btw is really good, thanks for trying to help
I think either it's a loose cable inside the phone or maybe I have to flash a specific Firmware (maybe an older one, a down grade) but flashing has never worked.
JeySee said:
Thanks, I know what you mean with the whiteness but there isn't, it isn't booting at all & I have those two cables which both work, that can't be it. I think I'll let it get checked by a pro. Your English btw is really good, thanks for trying to help
I think either it's a loose cable inside the phone or maybe I have to flash a specific Firmware (maybe an older one, a down grade) but flashing has never worked.
Click to expand...
Click to collapse
Really !! didn't know lol xD
btw i meant the cable inside the phone that can let the screen work without it the phone will be working and you only see a black screen while actually the phone is working . so try this
1.Power on phone
2.after phone vibrate . plugin the usb at the same time in pc open flashtool
3.Wait like 6-10 sec if something like this appeared '' Device connected with USB debugging off ''
this means the phone actually working. then this might the inside cable problem . if non of this happened dunno what else i can do for you . did you take to a pro yet ??
Sent from my Xperia X10 using xda app-developers app
EzzyLupe said:
Really !! didn't know lol xD
btw i meant the cable inside the phone that can let the screen work without it the phone will be working and you only see a black screen while actually the phone is working . so try this
1.Power on phone
2.after phone vibrate . plugin the usb at the same time in pc open flashtool
3.Wait like 6-10 sec if something like this appeared '' Device connected with USB debugging off ''
this means the phone actually working. then this might the inside cable problem . if non of this happened dunno what else i can do for you . did you take to a pro yet ??
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I've given it to a pro & hope they'll get it fixed!! If not I'll try to check what Bares asked me to do & provide further details.
Anyway, I'll let you know, thanks
JeySee said:
I've given it to a pro & hope they'll get it fixed!! If not I'll try to check what Bares asked me to do & provide further details.
Anyway, I'll let you know, thanks
Click to expand...
Click to collapse
Ok cool
Well i'm studying electronics 2nd year . so still a noob at hardware things :l
Sent from my Xperia X10 using xda app-developers app
Try stock back everything with SEUS first....
I have same problem on another x10.. there is a solution to fix.. probably you brke bootloader..and if it's so..then you have to give it to pro's... to flash whole firmware with box cable..not usb..
But before that..try this.. firstly...take original charger..and connect it to phone..let the battery charge..you can understand it's charging cuz in 30min's or so it will get heater... then pull off battery and let phone to lie without it for 20 min..then without battery connect phone to charger..and wait..you'll get green led.. wait 20 min after that...then put battery back and flash firmware with flashtool..with no firmware check option... flash whole firmware..kernel...baseband..etc..cuz now yo have empty phone... hope this helps..peace.
FeraVolt said:
I have same problem on another x10.. there is a solution to fix.. probably you brke bootloader..and if it's so..then you have to give it to pro's... to flash whole firmware with box cable..not usb..
But before that..try this.. firstly...take original charger..and connect it to phone..let the battery charge..you can understand it's charging cuz in 30min's or so it will get heater... then pull off battery and let phone to lie without it for 20 min..then without battery connect phone to charger..and wait..you'll get green led.. wait 20 min after that...then put battery back and flash firmware with flashtool..with no firmware check option... flash whole firmware..kernel...baseband..etc..cuz now yo have empty phone... hope this helps..peace.
Click to expand...
Click to collapse
Thank You so much!!!
I´ve given away the phone to a phone repair shop which i think are really good. But since they haven´t called me back I think it´s quite tricky for them too. They´ll charge me 20€ if they can fix it & if not I´ll give Your procedure a Go!!!
Thanks for helping Fera!!!
JeySee said:
Thank You so much!!!
I´ve given away the phone to a phone repair shop which i think are really good. But since they haven´t called me back I think it´s quite tricky for them too. They´ll charge me 20€ if they can fix it & if not I´ll give Your procedure a Go!!!
Thanks for helping Fera!!!
Click to expand...
Click to collapse
Hi Fera!
My phone's still at the repair shop, this guy is convinced he can repair it by flashing the right patch?!? O think he means firmware, so I g gave him another hour to try.
You wrote that i should flash the firmware with no firmware check option?? How shall I do that? Best regards!!!!
Does S1Tool provide any insight into what the state of the phone is??
If it returns it's status, part of the output is the current file system.... or lack there of.
Dr Goodvibes said:
Does S1Tool provide any insight into what the state of the phone is??
If it returns it's status, part of the output is the current file system.... or lack there of.
Click to expand...
Click to collapse
I just ran the S1 Tool & pressed identify & thats what the outcome is:
Running S1 from ver R8A013 (as i know R means Bootloader is locked)
Software AID: 0001
Loader AID: 0001
Flash ID: 002C/00B3
Loader Version: R4A024
Model: X10i
software version: 1227-4612 R2BA026
custom version: 1235-7836 R6A
Filesystem Version: 1227-4607_R2BA026
Ser No.....
Not recognized simlock certificate
maybe you should unlock phone by settool2?
I thought maybe it has something to do with the simlock certificate, so i tried Omnius Tool but the problem is, you need to check ''Unknown Sources'' which i can´t, cause the phone doesn´t boot at all!
EDIT :
I'm not really sure, but perhaps you should take a look here :
http://forum.xda-developers.com/showthread.php?t=1126358
and here :
http://forum.xda-developers.com/showthread.php?t=1324707
FYI
Regards
Bares said:
= CANCEL =
Click to expand...
Click to collapse
What do you mean Bares???
Bares said:
EDIT :
I'm not really sure, but perhaps you should take a look here :
http://forum.xda-developers.com/showthread.php?t=1126358
and here :
http://forum.xda-developers.com/showthread.php?t=1324707
FYI
Regards
Click to expand...
Click to collapse
Another links :
http://forum.xda-developers.com/showthread.php?t=1353623
or
http://forum.xda-developers.com/showthread.php?t=1385730
or
http://xperiadev.wordpress.com/guidelines-xperia/unlock-bootloader/
and...here :
http://androidflip.com/fix-dead-sony-ericsson-phones-fota-update-unlocked-bootloader/
FYI
Regards
Bares said:
Another links :
http://forum.xda-developers.com/showthread.php?t=1353623
or
http://forum.xda-developers.com/showthread.php?t=1385730
or
http://xperiadev.wordpress.com/guidelines-xperia/unlock-bootloader/
and...here :
http://androidflip.com/fix-dead-sony-ericsson-phones-fota-update-unlocked-bootloader/
FYI
Regards
Click to expand...
Click to collapse
Thanks Bares for Your suport!!! I´ve taken a look into all of these links & had hope again But as i read & eg. tried the flash tool provided in the first link (FOTA unbrick), ones again it didn´t work. The problem there was, i needed to have unknown sources checked which i can´t check, cause the devicedoesn´t & has never booted up before.
And for all the other links, I haven´t got an unlocked bootloader, it´s definately locked, so they couldn´t help. Thanks anyway!!! I wrote Sony a mail, but i guess they´re not going to respond.
Perhaps I should try to unlock my bootloader, if it´s possible, i don´t know.
What worked until now was flashing this firmware (X10i_3.0.1.G.0.75_GERMANY with flashtool) but as Fera sugested me to do (exclude Kernel & check no final verification). This only works if the device is without battery for approx 30 min.
I think I also managed to flash Baseband & Kernel this way Ones.
But only when i checked no final verification! Still the device didn´t boot up.....
After a lot of trying & flashing & errors I´m done for today & will continue tomorrow
Good Night
I just gave the Kernel and Baseband another try (unchecked final verification) and that´s what happened:
23/022/2013 21:22:20 - INFO - Selected X10i_3.0.1.G.0.75_Kernel_And_Baseband.ftf
23/022/2013 21:22:20 - INFO - Preparing files for flashing
23/022/2013 21:22:21 - INFO - Please connect your device into flashmode.
23/022/2013 21:22:45 - INFO - Device connected in flash mode
23/022/2013 21:22:46 - INFO - Opening device for R/W
23/022/2013 21:22:46 - INFO - Reading device information
23/022/2013 21:22:46 - INFO - Phone ready for flashmode operations.
23/022/2013 21:22:46 - INFO - Start Flashing
23/022/2013 21:22:46 - INFO - Processing loader
23/022/2013 21:22:46 - INFO - Checking header
23/022/2013 21:22:46 - INFO - Flashing data
23/022/2013 21:22:52 - INFO - Loader : S1_Loader_Root_f851 - Version : R4A024 / Bootloader status : UNROOTABLE
23/022/2013 21:22:52 - INFO - Disabling final data verification check
23/022/2013 21:22:52 - INFO - Processing kernel.sin
23/022/2013 21:22:52 - INFO - Checking header
23/022/2013 21:22:52 - INFO - Flashing data
23/022/2013 21:22:53 - INFO - Processing fota1.sin
23/022/2013 21:22:53 - INFO - Checking header
23/022/2013 21:22:53 - INFO - Flashing data
23/022/2013 21:22:54 - INFO - Processing fota0.sin
23/022/2013 21:22:54 - INFO - Checking header
23/022/2013 21:22:54 - INFO - Flashing data
23/022/2013 21:22:55 - INFO - Processing amss_fs.sin
23/022/2013 21:22:55 - INFO - Checking header
23/022/2013 21:22:55 - INFO - Flashing data
23/022/2013 21:22:55 - INFO - Processing dsp1.sin
23/022/2013 21:22:55 - INFO - Checking header
23/022/2013 21:22:55 - INFO - Flashing data
23/023/2013 21:23:00 - INFO - Processing amss.sin
23/023/2013 21:23:00 - INFO - Checking header
23/023/2013 21:23:00 - INFO - Flashing data
23/023/2013 21:23:08 - INFO - Processing cache.sin
23/023/2013 21:23:08 - INFO - Checking header
23/023/2013 21:23:08 - INFO - Flashing data
23/023/2013 21:23:08 - INFO - Ending flash session
23/023/2013 21:23:08 - INFO - Flashing finished.
23/023/2013 21:23:08 - INFO - Please unplug and start your phone
23/023/2013 21:23:08 - INFO - For flashtool, Unknown Sources and Debugging must be checked in phone settings
23/023/2013 21:23:08 - INFO - Device connected in flash mode
23/023/2013 21:23:23 - INFO - Device disconnected
In my opinion it looks ok but it still doesn´t boot
About above FOTA unbrick, i just wanna show you the similar problem on 2011 devices, it could be due to broken bootloader.
For us (2010 device), this could be happened due to improperly bootloader unlocking (see my post on Fera's discussion thread).
BUT, it still not 'dead' yet (i mean this just software related issue, not an hardware) , since S1Tool can to detected your .
BTW, have you tried to downgrade to 1.6 or 2.1 ?.
Link (thanks to the logic) :
http://forum.xda-developers.com/showpost.php?p=28235376&postcount=2
Android 1.6
or
Android 2.1
Regards
Bares said:
About above FOTA unbrick, i just wanna show you the similar problem on 2011 devices, it could be due to broken bootloader.
For us (2010 device), this could be happened due to improperly bootloader unlocking (see my post on Fera's discussion thread).
BUT, it still not 'dead' yet (i mean this just software related issue, not an hardware) , since S1Tool can to detected your .
BTW, have you tried to downgrade to 1.6 or 2.1 ?.
Link (thanks to the logic) :
http://forum.xda-developers.com/showpost.php?p=28235376&postcount=2
Android 1.6
or
Android 2.1
Regards
Click to expand...
Click to collapse
I'll try to down grade my device after work! I already tried the 2.1 version, I'll give the 1.6 later.
One thing I recognized was, that when I plug in the charger, there's no led on & I think it's not charging!
Talk to you later, peace & thanks!!!
JeySee said:
I'll try to down grade my device after work! I already tried the 2.1 version, I'll give the 1.6 later.
One thing I recognized was, that when I plug in the charger, there's no led on & I think it's not charging!
Talk to you later, peace & thanks!!!
Click to expand...
Click to collapse
Oh i see, hmm.. i dont think that gonna work, since there is bootloader/board related issue, but. ... yeah. ... goodluck.
Regards