Related
Hi all,
Firstly, I apologise if this is the wrong forum to post this question but with so many forums it's very hard to know which is the right one! I hope I've found it.
I've been reading around and researched how to root my Galaxy S II. In the Phone --> About my phone is 2.6.35.7-I9100 BVKG3-CL344296 so I downloaded CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4.zip which appears to be the right kernel for what I'm doing. I've downloaded Odin v1.85 and launched the phone in download mode.
All seemed to be going well and Odin saw the phone. I put the above file in the PDA section and left all the check boxes alone. I pressed Start and the little green bar got bigger with 'KERNEL' in the text box above. I got the following in the message area:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
The phone rebooted and now it is stuck on the very first screen with the yellow warning sign. I have tried to put the stock kernel back on, Kernel_I9100BVKG3.TAR, but it makes no difference. The phone is currently bricked.
Can anyone help?
Cheers,
Richard.
Did you put the .ZIP file into the PDA section?
You have to extract the .ZIP, so you get a .tar file, it's that .tar file you need to put into the PDA section.
Put your phone into download mode and try flashing said .tar file with Odin again.
Thanks for the reply, HellcatDroid.
I actually managed to figure out what was going on following that post. I had a sneaking suspicion that the USB ports on my computer weren't acting right so I tried flashing the phone again on one of my laptops and it worked straight away.
Just goes to show that you can research all the likely causes and outcomes and ultimately find out that it's something that you really wouldn't expect normally.
I appreciate your offer of help, though.
horsemanuk said:
Hi all,
Firstly, I apologise if this is the wrong forum to post this question but with so many forums it's very hard to know which is the right one! I hope I've found it.
I've been reading around and researched how to root my Galaxy S II. In the Phone --> About my phone is 2.6.35.7-I9100 BVKG3-CL344296 so I downloaded CF-Root-SGS2_XX_OXA_KG3-v4.1-CWM4.zip which appears to be the right kernel for what I'm doing. I've downloaded Odin v1.85 and launched the phone in download mode.
All seemed to be going well and Odin saw the phone. I put the above file in the PDA section and left all the check boxes alone. I pressed Start and the little green bar got bigger with 'KERNEL' in the text box above. I got the following in the message area:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
The phone rebooted and now it is stuck on the very first screen with the yellow warning sign. I have tried to put the stock kernel back on, Kernel_I9100BVKG3.TAR, but it makes no difference. The phone is currently bricked.
Can anyone help?
Cheers,
Richard.
Click to expand...
Click to collapse
I think you have put clockworkmodmod on the phone and a custom kernel, that is why a yellow triangle shows up. I suggest that you should put the phone into recovery mode. It is the same key actions as download mode but you press the up volume button instead of the down button.When you have that up and running you will have options to install file from sdcard, mount, wipe delvik cache and other things. If you have this, in orange colour, then pull your battery out to switch off phone.
Your phone is not bricked.
It depends which country you live in to download the correct system.
Get back on here with the info and I will progress with you.
Sent from my GT-I9100 using XDA Premium App
Problem is already solved, bud.
Hello everyone,
I am not sure whether this is the right place for my question but my Galaxy S II stopped working and I was wondering if anyone might help me?
I tried updating the FW from 2.3 to 4.0 (I'm guessing) through Kies and after about 45 minutes of seeing both screens (PC and Phone) unchanged, I ended up removing the phone. Next, Kies suggested an "Emergency Firmware thingy" (it said it in German so I wouldn't really know how to translate it). Tried again, after 45 minutes gave up once more.
Since then, I downloaded ODIN and tried to follow instructions I found online to flash it (first I tried with Ice-Cream, then with Gingerbread).
Ever since I removed it from Kies, it would only show a phone connected to a PC with a yellow warning triangle in the middle. Whenevery I use the Volume-Menu-Power button, the warning on changing the OS appears and then, when I press "volume up", it shows the green android in the middle and tells me it's downloading and not to turn off the device, though there is no downloading progress.
When I try with ODIN, ODIN recognizes the device on both USB ports - I found md5 files for Germany but every time I start it the Message window says:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100VIAKI1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
and doesn'tget any farther than "cache.img".
I am at a complete loss as to what to do or try. I have had this phone for a year now, this is the first time I tried to update with Kies - the phone had not been rooted or anything else. The phone has no simlock (I don't know if any other information is relevant).
Any ideas or has my phone thus become the infamous brick? *pleasenopleasenopleaseno*
Thanks in advance for your time and patience - in case I've overread a thread with this exact same problems, I apologize and would appreciate if someone could re-direct me. I've already spent so much time looking for solutions, my concentration may have suffered.
Best wishes,
Junivere
Before flashing with Odin, did you kill all Kies processes from Windows task manager? If not, do that and then start flash.
Edit: And since you can access download mode, its not bricked...so you can relax
Sent from my GT-N7100 using Tapatalk 2
I9100?
Flash JB.
And try an older ODIN version.
And check kies like the above poster suggested.
Other usb port/usb cable might do the work too.
Sent from the little guy
Thanks for the replies!!!
I stopped all the Kies processes over the task manager before (was that enough?) and tried from both USB ports of my laptop (006 and 007 I guess) with equal results.
I used Odin3 v1.85 - is that too old or too new? Which version should I try?
And I am sooooooooo relieved it's not a brick!!!
Thanks again!
kinda old, try 1.3 or 3.x
And flash siyah v5 just for kicks.
Sent from the little guy
I tried again and I'll try to explain step by step, ok? Maybe you notice something I did wrong?
I killed all the Kies processes in the task manager like before.
I downloaded Odin 3 v.07 and started it. I had "Auto reboot" and "F.Reset time" checked and clicked on "PDA" to add the *.md5 file with the firmware.
I started the phone in the download mode and connected it to the PC, Odin recognized it alright.
I started and the first time, with the USB port in front, it stopped at "cache.img" in the message window.
I tried a different FW file and the other USB port further back and for the first time the phone shows a tiny bit of blue in the progress underneath "Downloading..." but in Odin it is now stuck at "factoryfs.img" for the last ten minutes,
The entire message window says this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLA4_I9100VIAKI1_I9100XXKI4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cache.img
<ID:0/007> factoryfs.img
Any ideas???
Best wishes and thanks again!!!
Flash siyah V5.
Sent from the little guy
How do I do that? I tried to find an instruction in the XDA forum in the 15 minutes I have between posts but couldn't find anything.
Junivere83 said:
How do I do that? I tried to find an instruction in the XDA forum in the 15 minutes I have between posts but couldn't find anything.
Click to expand...
Click to collapse
gokhanmoral.com
Siyah v5 for SII.
Put it on PDA, press start and flash away.
Sent from the little guy
Ok, so now I am starting to get slightly terrified:
When trying to flash Siyah 5 (Siyah-s2-v5.0.1), it stops there:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> zImage
:crying:
Keep trying, you'll come around.
Another usb cable could help.
Another pc would as well.
Sent from the little guy
Ok, so the Sivyah v5 flash worked when I tried Odin3 v1.3 but I'm still battling with the actual firmware.
Thanks for your help so far, though - I'm really greatful and I'll keep trying.
My mission for today will be finding someone's cable and PC to borrow...
I'll keep you posted, though!
Wow, you are the bestest ever!!!
With a netbook (OS Windows 7) I eventually managed the flash - now I'm reconfiguring everything. I am sooooo relieved!!!!
I have one last question (sorry for being so naive!), though:
Is it still possible with a flashed phone (with the Sivya thing on it) to use Kies to try and update or do automatic updates or do I have to flash all the newer firmware?
Best wishes,
Junivere
Junivere83 said:
Wow, you are the bestest ever!!!
With a netbook (OS Windows 7) I eventually managed the flash - now I'm reconfiguring everything. I am sooooo relieved!!!!
I have one last question (sorry for being so naive!), though:
Is it still possible with a flashed phone (with the Sivya thing on it) to use Kies to try and update or do automatic updates or do I have to flash all the newer firmware?
Best wishes,
Junivere
Click to expand...
Click to collapse
Depends on what ROM you are flashing.
For instance, if you flash LS8 you'll get a 22 mb update to get you to LSD.
I would flash LSD straight up tho.
If you don't want a headache with odin no more, feel free to try Mobile Odin, it will perform all the flashing for you.
Sent from the little guy
Hello
For a couple of weeks now, i've been trying to fix this phone for a friend who studies as an artist. She wanted the Galaxy Beam for presentations and bought one used as they seemingly ain't to be found in the stores any longer.
Originally, the firmware ends at 2.3.6 on this brand, but this one was rooted to be fit with 4.1.2.
The phone bugged and hung in weird ways, so i thought to follow the steps into downgrading it to stock rom for her and see if that would help.
I am no expert, but since i have successfully rooted several phones and tablets earlier with no issues (its pretty straight forward when it works, right), i felt up for the tast.
I have spent a lot of time googling the last couple weeks, and reading a lot of solutions here on these forums, but i can't seem to find this ecact problem, so here goes.
Samsung Galaxy Beam GT.I8530
Odin3 v3.07
Windows 7 and 8 fully updated (tried both)
No matter which Android version i chose, it ends up at the same spot. Stuck at logo screen after first boot.
I have tried both with and without a PIT file, same result.
This last try was with a PIT and Android 4.1.2. (i understand that PIT is not nessessary, as it should be baked within the PDA if it's a single file, but what won't you try eventually, right?)
Load Odin, admin rights
Boot phone in download mode
Insert USB
-->
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8530DXLJ1_I8530OLBLJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img.md5
<ID:0/003> kernel.bin.md5
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
- here, the phone reboots and loads to logo screen *
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
- from here the phone wont nudge from the logo screen. can reboot, nothing new happens.
No other functions work, other than:
- volume down+home+power (download mode)
- power (boots to logo screen)
Thanks for reading! Hope someone feels up for the task
Edit: It might be vital information that the phone will uncharge the battery at logo screen eventually, even when connected to a computer. (5v output) But i believe this is common somehow.
Also, if i try and shut down the phone, it will reboot into a frozen "star icon".
Bump*
What makes this issue differ from others i've read on these forums, is this:
Akiiras said:
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Any theories?
As much as i hate bumping, i'm feeling kind of responsible to try and fix it. Hope someone got a clue on what might be wrong. Thanks
"I bet you 10 buck you'll get your answer here within a couple days" -a friend said, well, in norwegian though.
I guess a week later and no response means that i've at least earned 10 buck! ^^
Guess i can give it one more shot here before i send it to a repair guy.
*bump*
Akiiras said:
Guess i can give it one more shot here before i send it to a repair guy.
*bump*
Click to expand...
Click to collapse
Are you sure about the right region when choosing a firmware? Did you also try Odin 1.85? Have you tried flash a custom recovery via Odin and flash a rom manually?
LS.xD said:
Are you sure about the right region when choosing a firmware? Did you also try Odin 1.85? Have you tried flash a custom recovery via Odin and flash a rom manually?
Click to expand...
Click to collapse
Hi, and thanks for the reply!
I am pretty sure i got the right firmware region. At least, the only region that covered my location (norway) that i could find, was nordic.
I have not tried Odin v1.85 or manually. I guess i can find a guide on how to do it manually here somewhere, but i'll go for a shot with the older version of Odin right away.
Thanks!
Akiiras said:
Hi, and thanks for the reply!
I am pretty sure i got the right firmware region. At least, the only region that covered my location (norway) that i could find, was nordic.
I have not tried Odin v1.85 or manually. I guess i can find a guide on how to do it manually here somewhere, but i'll go for a shot with the older version of Odin right away.
Thanks!
Click to expand...
Click to collapse
BTW there are 4 different versions for nodric countries --> LINK
Odin3 v1.85 didn't work. Well, in the sense that it probably does a job well done and says everything went well, but the phone wont nudge past boot screen.
I'll see if i can learn how to do it manually and come back with the result.
Edit:
LS.xD said:
BTW there are 4 different versions for nodric countries --> LINK
Click to expand...
Click to collapse
Oh, thanks! I couldnt find it at sammobile myself, so i found it somewhere else. This could be it!
any developments?
I Have the Same Problem
I Have the same problem please anyone help me!!!!!
SOLUTION
Akiiras said:
Hello
For a couple of weeks now, i've been trying to fix this phone for a friend who studies as an artist. She wanted the Galaxy Beam for presentations and bought one used as they seemingly ain't to be found in the stores any longer.
Originally, the firmware ends at 2.3.6 on this brand, but this one was rooted to be fit with 4.1.2.
The phone bugged and hung in weird ways, so i thought to follow the steps into downgrading it to stock rom for her and see if that would help.
I am no expert, but since i have successfully rooted several phones and tablets earlier with no issues (its pretty straight forward when it works, right), i felt up for the tast.
I have spent a lot of time googling the last couple weeks, and reading a lot of solutions here on these forums, but i can't seem to find this ecact problem, so here goes.
Samsung Galaxy Beam GT.I8530
Odin3 v3.07
Windows 7 and 8 fully updated (tried both)
No matter which Android version i chose, it ends up at the same spot. Stuck at logo screen after first boot.
I have tried both with and without a PIT file, same result.
This last try was with a PIT and Android 4.1.2. (i understand that PIT is not nessessary, as it should be baked within the PDA if it's a single file, but what won't you try eventually, right?)
Load Odin, admin rights
Boot phone in download mode
Insert USB
-->
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8530DXLJ1_I8530OLBLJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003> hidden.img.md5
<ID:0/003> kernel.bin.md5
<ID:0/003> modem.bin.md5
<ID:0/003> system.img.md5
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
- here, the phone reboots and loads to logo screen *
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
- from here the phone wont nudge from the logo screen. can reboot, nothing new happens.
No other functions work, other than:
- volume down+home+power (download mode)
- power (boots to logo screen)
Thanks for reading! Hope someone feels up for the task
Edit: It might be vital information that the phone will uncharge the battery at logo screen eventually, even when connected to a computer. (5v output) But i believe this is common somehow.
Also, if i try and shut down the phone, it will reboot into a frozen "star icon".
Click to expand...
Click to collapse
I have The solution For that remove your battery and charge battery by use of another working mobile or battery charger box
after charging you do the flashing using android 4.1.2
it successfully works on my mobile
the problem is battery is low so that at the time of flashing it turned off ....so fill the battery and use......
Hello, guys. First of all sorry for my english, but I need help.
I am here because I dont know what to do, I have tried everything without success. Let me explain: I have a S3 GT-I9300, I have had it since 2013 and I have gone through everything with it: brick, several rom, resets, etc. On saturday I woke up and my phone was in a boot loop, but I said ''bah, I can fix it in 20 mins'', but as you can see I couldnt do it. First of all, NAND write start error appeared, I havent seen that error before, then partition errors appeared too.
I can enter to dowload mode and it says GT-I9300 in product name, I can enter to recovery but I cant do anything there
I have tried to flash the same stock rom that I always have, it is an emergency firmware that I have used like 5 times, so.... It is weird that it cannot fix this up. I also have tried with Sammobile's firmware, with and without pit, in 3 usb ports and with 2 usb cables and always the same result: FAIL.
I hope you can help me, buying another phone in my country is difficult.
It can be a hardware issue on emmc of the phone if failed after so many different tries
dusterphil said:
It can be a hardware issue on emmc of the phone if failed after so many different tries
Click to expand...
Click to collapse
And what can I do about it?
What is the Odin error? Post the Odin log.
audit13 said:
What is the Odin error? Post the Odin log.
Click to expand...
Click to collapse
This is one of those:
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping...
Then it does not do anything (in this case I used 4 files + pit, and those files and pit are the ones that I have always used)
The other one is this:
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
This was the first error that appeared. (this is with sammobile's firmware)
The sboot.bin file is the bootloader. It's probably failing to flash for one or more of the following reasons:
the bootloader in the phone is newer than the bootloader in the ROM being flashed;
the ROM is not for the phone being flashed;
need to try a different USB cable;
need to try a different USB port; and/or
the memory chip in the phone is damaged.
Borked nand. If the rom and cable are known to be good and 2 pc's fail then dead nand. It's unfortunate but it happens.
Beamed in by telepathy
I think the phone is dead, it have faught a lot in this years. Thank you anyways
jeanavila_ said:
I think the phone is dead, it have faught a lot in this years. Thank you anyways
Click to expand...
Click to collapse
It's time for you to get a new model
Hello , I've searched for any similar threat the whole night but I couldn't find any with the same problem as mine!
I was trying to root my Samsung Galaxy Grand Prime Pro SM-J250F/DS.
After enabling OEM Unlock and USB Debugging,
I used Odin to flash TWRP , Odin executed the file without any problem and stated PASS.
BUT when I try to boot on recovery mode, I still had the basic samsung recovery mode.
I tried to flash it severals times, each time showed pass, but the same recovery mode was still there.
I couldn't find anyone else facing this problem on any other forum neither.
I decided to try other root's threat that I found on other forum where I was suggested to download an image.tar.md5 then flash it with Odin for rooting process of my phone.
After I did this , the operation was PASS but upon booting up my device, my phone was on boot loop :'(
I tried being cautious all the way to root this reading every information carefully to avoid this kind of problems, but still I fail
I dont know what to do, I spent the whole night looking for answers on the web but I couldnt find anything similar.
I cant even enter recovery mode it booting all over again. I only have access to download mode.
Thus, I tried to download a fresh firmware from samsmobile, I dont know how to do to know which Country/PDA/CSC to choose from
I tried to download a random one and flash it with odin but the operation failed and here's the logs;
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Can anyone please help me solving this problem , this is my only phone and I'm going to end in a lot of problem without it
Help please . :crying: :crying: :crying:
Hi , in order to help you you need to give me little more information ....
Where did you bought your phone which region ? Is on some provider Sprint , Verizon , etc
Up
Up got exactly the same need help please :crying:
Same phone same problem
Nadir Boodhoo said:
Hello , I've searched for any similar threat the whole night but I couldn't find any with the same problem as mine!
I was trying to root my Samsung Galaxy Grand Prime Pro SM-J250F/DS.
After enabling OEM Unlock and USB Debugging,
I used Odin to flash TWRP , Odin executed the file without any problem and stated PASS.
BUT when I try to boot on recovery mode, I still had the basic samsung recovery mode.
I tried to flash it severals times, each time showed pass, but the same recovery mode was still there.
I couldn't find anyone else facing this problem on any other forum neither.
I decided to try other root's threat that I found on other forum where I was suggested to download an image.tar.md5 then flash it with Odin for rooting process of my phone.
After I did this , the operation was PASS but upon booting up my device, my phone was on boot loop :'(
I tried being cautious all the way to root this reading every information carefully to avoid this kind of problems, but still I fail
I dont know what to do, I spent the whole night looking for answers on the web but I couldnt find anything similar.
I cant even enter recovery mode it booting all over again. I only have access to download mode.
Thus, I tried to download a fresh firmware from samsmobile, I dont know how to do to know which Country/PDA/CSC to choose from
I tried to download a random one and flash it with odin but the operation failed and here's the logs;
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Can anyone please help me solving this problem , this is my only phone and I'm going to end in a lot of problem without it
Help please . :crying: :crying: :crying:
Click to expand...
Click to collapse
Alpha45amg said:
Up got exactly the same need help please :crying:
Same phone same problem
Click to expand...
Click to collapse
Hey......when you got vibration after flashing twrp in odin, then immediately remove the battery and after some time put it back reboot to recovery bro.....
Hope this helps
If anyone needs here is the PIT file for the latest factory firmware of J2.
firmware version reference:
HTML:
AP_J250FXXS2ARE1_CL13338766
BL_J250FXXS2ARE1_CL13338766
CP_J250FXXS2ARF1_REV00
CSC_OJV_J250FOJV2ARD4
HOME_CSC_OJV
dude if u can still enter download mode, then is not bad..snap ur device in download mode and send it to me, let me provide u with a solution
Nadir Boodhoo said:
Hello , I've searched for any similar threat the whole night but I couldn't find any with the same problem as mine!
I was trying to root my Samsung Galaxy Grand Prime Pro SM-J250F/DS.
After enabling OEM Unlock and USB Debugging,
I used Odin to flash TWRP , Odin executed the file without any problem and stated PASS.
BUT when I try to boot on recovery mode, I still had the basic samsung recovery mode.
I tried to flash it severals times, each time showed pass, but the same recovery mode was still there.
I couldn't find anyone else facing this problem on any other forum neither.
I decided to try other root's threat that I found on other forum where I was suggested to download an image.tar.md5 then flash it with Odin for rooting process of my phone.
After I did this , the operation was PASS but upon booting up my device, my phone was on boot loop :'(
I tried being cautious all the way to root this reading every information carefully to avoid this kind of problems, but still I fail
I dont know what to do, I spent the whole night looking for answers on the web but I couldnt find anything similar.
I cant even enter recovery mode it booting all over again. I only have access to download mode.
Thus, I tried to download a fresh firmware from samsmobile, I dont know how to do to know which Country/PDA/CSC to choose from
I tried to download a random one and flash it with odin but the operation failed and here's the logs;
Can anyone please help me solving this problem , this is my only phone and I'm going to end in a lot of problem without it
Help please . :crying: :crying: :crying:
Click to expand...
Click to collapse
Did you try restoring the factory firmware image using samsung smart switch or odin?
check this guide:
http://mobilesolutionru.blogspot.com/2018/05/samsung-galaxy-grand-prime-pro-sm-j250f.html
if you have already official firmware just flash boot.img and recovery.img only to cure hang problem
Try this 4 Repair file
There are three types of PDAs:
XX
DX
XW
Here is a video can help to fix this problem. Fix Samsung system issues like Stuck on Boot Loop, Stuck at Samsung logo and more
https://www.youtube.com/watch?v=zXSHe3oorIM
Nadir Boodhoo said:
Hello , I've searched for any similar threat the whole night but I couldn't find any with the same problem as mine!
I was trying to root my Samsung Galaxy Grand Prime Pro SM-J250F/DS.
After enabling OEM Unlock and USB Debugging,
I used Odin to flash TWRP , Odin executed the file without any problem and stated PASS.
BUT when I try to boot on recovery mode, I still had the basic samsung recovery mode.
I tried to flash it severals times, each time showed pass, but the same recovery mode was still there.
I couldn't find anyone else facing this problem on any other forum neither.
I decided to try other root's threat that I found on other forum where I was suggested to download an image.tar.md5 then flash it with Odin for rooting process of my phone.
After I did this , the operation was PASS but upon booting up my device, my phone was on boot loop :'(
I tried being cautious all the way to root this reading every information carefully to avoid this kind of problems, but still I fail
I dont know what to do, I spent the whole night looking for answers on the web but I couldnt find anything similar.
I cant even enter recovery mode it booting all over again. I only have access to download mode.
Thus, I tried to download a fresh firmware from samsmobile, I dont know how to do to know which Country/PDA/CSC to choose from
I tried to download a random one and flash it with odin but the operation failed and here's the logs;
<ID:0/003> Odin engine v(ID:3.1205)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Can anyone please help me solving this problem , this is my only phone and I'm going to end in a lot of problem without it
Help please . :crying: :crying: :crying:
Click to expand...
Click to collapse
Same happened to me once,what i just did was
1.installed twrp for samsung j250f
2.installed a custom rom of j250f using twrp