Hi guys...This phones is driving me nuts.
Baseband 015 - Kernel 2.1.1.A.0.6
Stock Firmware 2.1 update 1..
Rooted(checked super user everything is fine) Bootloader Unlocked(S1_EROM FROM VER "r8A029)
Installed CMW and Xrecovery.. not at the same time at different times to see if one of them was the reason for my phone not booting.
OKAY.So my problem is the phone will NOT BOOT after kernel logo AFTER i install i custom rom (I am able to install custom roms an kernels successfully but phone does not boot up..).I TRIED ALOT OF ROMS.FROM GINGERBREAD TO PORTED ONES TO ICS.
So i know its not the roms fault its something wrong with the phone.
Extra info.Phone was t-mobile unlocked,also i have no simcard in this phone right now cz am using another phone,i have a 32gb micro sd formatted to fat32 from my windows 7.
when i use flashtool and flash back to stock firmware phone boots up fine...
If anyone smart is outhere that can help PLEASE help mee
Related
My phone is stuck at SE logo.. Xrecovery is also not working.. SEUS also not working. Can rom be flashed vai flash tools . Actually i installed wrong kernel on my rom n the phone became unresponsive.. Please can anyone help. Cant get my phone working.
same here... please can some one help us in installing kernal or roms through flash tools?
if it's stuck at se logo then Seus should work...
flash stock firmware with flashtools and start all over.
Yes, you can
Hi.
I went through something similar, if not the same.
My rom got corrupted with the new kernel, I lost xrecovery and SEUS asks for the SD card to be mounted, which cannot be because ROM did not see it after kernel update.
before reading further, you need to have your phone rooted, you can do it via xrecovery, easily found in this forum.
what did I do to solve it?
***EDITED****
I installed a generic ROM via flashtool, you do not have to boot the phone to do it, the bad thing is that everything will be wiped from phone (not from SD though)
you can find generic X10 stock roms in this forum.
After that, you will be good to go.
hope this helps.
Hello guys. My problem is that I tried to install cyanogen mod 7.1 on my xperia ray. I did everything as i was said in forum. Finally i got it on, but is is bootlooping and none of the solutions work. I am really stuck. I tried to download st18 as a .tft file and install though flashtool, but i cannot do it because my phone is not running in flashmode. I am not sure if this is even possible. Anyway, if anyone could be bothered to give any advice on how to return to the st18 and forget about this idea, i would be really thankful!
download cyanogenmod 7.0.1 and install it , it will work
i am wondering why flashmod is not working
in future whenever you install custom rom , make a complete backup of stock rom
i have a backup of my stock rom on sd card , i can revert back to stock any time .
hi i have bricked my ray. I got the ics update from seus the other day and rooted it and tried to flash a status bar mod via cwm and the status bar vanished so i went to restore my backup and i clicked my old gb backup instead of my ics backup by mistake and now it wont boot up it just stays at se logo. I tried flashing gb with flash tool still no luck then tried flashing free xperia unbrick ftf first then reflash gb still no luck. Flash to finishes flashing but at the reboot stage at the end the phone just doesnt boot past the se logo but pc companian picks up that a phone is atached. Please someone help me im beging u.
Hi there!
Do you have flashed GB Kernel fitting your GB Rom of the Backup you have restored?? You need the fitting kernel.
Download Fastboot oder Flashtool, get the kernel img an flash it to your phone.
Bye an good luck!
What ROM do you have installed then currently?
Install the proper kernel also according to this.
Full stock .ftf firmware files should also include kernel.
yea the firmware's iv been flashing have the kernel in them. I think i damaged the bootloader coz al the flashing was succesfull but the ray just wunt boot into android so damaged bootloader. Anyway i gave up and its in for repair lol.
hello this is my first aid, suffer some devices fail.
corruptea SD card, and you can not flash a rom.
eg
you use a CM9 rom ics (achojan) normal
after flashing the kernel CM10 (scricht007)
You can no longer re-flash the CM9 rom ever.
I tried to give him a hard reset xperia x10, unlock the bootloader, I downgraded the firmware to gb, micro sd've changed, and nothing has given me solution, I could not install a CM9 rom. all is not lost.
solution:
lock the boot loader
use seus, update firmware, to gb.
open, FlashTool. 2.1 flash rom piece, the phone normally.
turn off the phone, and open seus updates the firmware to gingerbread
root to mobile
unlock the bootloader
flash the custom kernel, and enjoyment.
achojan rom flash kernel v6 feravolt
sorry for my bad English (google translate)
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Incredeblehunk said:
Hello experts , I did a first attempt at installing a custom ROM (Ferra Jelly Bean v 36 for Xperia X10i) and everything went smooth, (my device was rooted and bootloader unlocked and CWM v5 installed) but for the first boot, only SONY ERICSSON appears and just stays that way with the SONY ERICSSON name.
Is it all dead or do I have some hope of reviving it? if yes then can you please help me?
Click to expand...
Click to collapse
Use SEUS (Sony Ericsson Update Service) to re-flash your original Sony Ericsson ROM.
Download the FeraLab ROM GB v36 zip file to your phone.
Flash FeraLab Kernel v18.4 using Flashtool
Restart your phone.
Enter CWM recovery at the blue light/pink light and install FeraLab GB v36 ROM.
Reboot.
If it doesn't boot up completely and hangs during first start-up , re-flash Feralab Kernel v18.4 and then reboot again.
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
MasterofTime92 said:
I'm having the same problem, X10i is stuck on the SE boot screen. This happened directly after I flashed the Feralab v36 rom, however, I couldn't flash the latest kernel beforehand, because flash tool failed to do it. I have xRecovery installed, but I cannot access it. Not only that but it does not seem to want to go into flash mode, have tried using flash tool to flash stock rom, I have tried using SEUS, and PC Companion. Nothing has worked so far.
Click to expand...
Click to collapse
As @doodownunda has mentioned, if you have access to Flashtool (Not sure why you don't have access to SEUS/PCC then) you can flash Tof37 X10S v9 ROM as the whole thing including kernel is a Flashtool flashable image. It's an all in one Kernel/ROM.
xRecovery is old school and comes with older Kernels, but CWM recovery is the main now.
Volume up button to access CWM recovery at the first flashing light on booting if needed at a later stage.
Seem you didn't flash the right kernel..
Sent from my X10i using xda app-developers app
You need to reflash 2.3.3 generic firmwares a:laugh:nd try install the rom again..:laugh: