I have the korean version of galaxy note E160L.
Can I install AT&T I717 rom to my E160L? Can this work?
I could not find any international rom for my phone?
marpuc said:
I have the korean version of galaxy note E160L.
Can I install AT&T I717 rom to my E160L? Can this work?
I could not find any international rom for my phone?
Click to expand...
Click to collapse
I would not do it unless you want to brick your phone. The difference is the processor.
http://forum.xda-developers.com/forumdisplay.php?f=1346 go there to find your rom. Good Luck!
xavier55 said:
I would not do it unless you want to brick your phone. The difference is the processor.
http://forum.xda-developers.com/forumdisplay.php?f=1346 go there to find your rom. Good Luck!
Click to expand...
Click to collapse
The processor is same 32bit Qualcomm Snapdragon APQ8060, 1500MHz
So does anybody have any useful answers please...
uraz said:
The processor is same 32bit Qualcomm Snapdragon APQ8060, 1500MHz
So does anybody have any useful answers please...
Click to expand...
Click to collapse
there are no roms for you because there are maybe a total of 3 guys on here with a Korean note. All came. posted the same question once. everyone said don't do it. they never posted again.
you are better off swapping it for a i717 or N7000 if you want to mod it. flashing a Rom made for any other device than YOURS is asking for a brick.
when you say useful answers, do you mean until someone tells you what you want to hear?
there are reasons your model number is completely different. its not only cosmetic.
to my knowledge, only one person said he would take a bullet and flash it anyways, and to hell with the consequences. He has not reported back...yet.
I, for one, would not risk a $600 device on a gamble.
What I meant by useful answer is ; a person answering or writing some info who knows this business and can give a detailed answer regarding the flashing . Because a person who works with these kind of devices would know if the device has exactly the same specs or not and if it would be safe to flash by looking at the specs sheet . Or at least he would have an idea about it... Additionally they might have a friend who has done something like this in the past with different devices... I am sure there are a lot more people who has this korean version but they dont feel encouraged to try anything or even open a thread because of the answers like this. I am pretty sure there are Koreans reading these posts too so they might have something to share. All I am trying to say is because this device costs 1200$ in my country I bought it from Korea for 550$ while I had the chance. And just wanted to see if there are solutions for some questions regarding korean version of this model .
But thx for your reply anyways...
hi there..
so u guys are facing problems with this korean version of Galaxy Note???
kindly let me know the issues u r facing. so i can help u all.
i have already done a huge research and in the end i made my E160L perfect.. without any issues at all.
currently my device is rooted with 2.3.6 Gingerbread.
and soon i will upgrade it to ICS with modified rom
sms problem fix plz
saqib said:
hi there..
so u guys are facing problems with this korean version of Galaxy Note???
kindly let me know the issues u r facing. so i can help u all.
i have already done a huge research and in the end i made my E160L perfect.. without any issues at all.
currently my device is rooted with 2.3.6 Gingerbread.
and soon i will upgrade it to ICS with modified rom
Click to expand...
Click to collapse
my koreon version E160l not working sms, any fix or good firmware
saqibmobile said:
my koreon version E160l not working sms, any fix or good firmware
Click to expand...
Click to collapse
not familiar with your ver, but have you tried resetting the apn?
bigjoe2675 said:
not familiar with your ver, but have you tried resetting the apn?
Click to expand...
Click to collapse
Sup bigjoe!!! Anyway the Korean note....the apn thing won't fix the issue their having .this the 3 thread I seen with ppl having SMS and other issues
Sent from my SAMSUNG-SGH-I717 using xda premium
SMS = GSM phone modem. Possibly carrier/sim issue
MMS = APN settings, data plan, correct modem, correct band setting
galaxy note e-160l
saqib said:
hi there..
so u guys are facing problems with this korean version of Galaxy Note???
kindly let me know the issues u r facing. so i can help u all.
i have already done a huge research and in the end i made my E160L perfect.. without any issues at all.
currently my device is rooted with 2.3.6 Gingerbread.
and soon i will upgrade it to ICS with modified rom
Click to expand...
Click to collapse
mine also that room but after upgarding to ics my problem is the sms thing. I cant send more than 149 char
so pls give me a download site for that room. But first it is possible to downgrade to that old room?
Related
Hello,
I have a rooted Samsung galaxy s3 (SAMSUNG-SGH-I747 ) and want to load cyanogenmod9 but I haven't seen any articles/posts on how to do it. Does anyone know of a way to do this for my specific model? Or does that even matter? Pre-emptive thanks for any help XD
-Deadround
Sorry, wrong forum! :silly:
@Mod: Please move this thread!
As far as I can tell, no one is working on it yet.
I will contribute what I can to help it happen. Can an interested developer share information on how this is done in general? Or maybe start an IRC where we can work on it?
Deadround said:
Hello,
I have a rooted Samsung galaxy s3 (SAMSUNG-SGH-I747 ) and want to load cyanogenmod9 but I haven't seen any articles/posts on how to do it. Does anyone know of a way to do this for my specific model? Or does that even matter? Pre-emptive thanks for any help XD
-Deadround
Click to expand...
Click to collapse
None out yet and dont attempt to flash the International rom or you WILL brick your phone. Just need to wait it out, it might be a while though.
It's being worked on:
http://www.epiccm.org/2012/06/sprint-sgs3-cm9-development-plan.html
carrier
I forgot to mention that I am on at&t. Does that matter?
Not much. The LTE variants are very similar.
ATT OMEGA 7.0 phone won't turn on anymore
So I have an ATT S3 and I misread the thread and tried to install Omega 7.0 after rooting and now my phone won't turn on at all. Be careful of what you do. I'm screwed right now. Any help would be great !
I ran into the same problem and found the solution that fixed my phone here
I really hope someone can help. I have been reading XDA for a few years and had 1 thread and always read before asking. I recently purchased a Samsung Galaxy S3 I9300 from Amazon. I never had any problems with there service. I am from the US and am overseas for the next year. I had someone bring the phone to me. I decided to root my phone thinking it was an i9300 because that whats written on the back and also what it said inside the phone (settings-about phone).
GT-I9300
Android v 4.1.1
Firmware Build ID JRO03L
Firmware Build PDA I9300ZSEMC
Firmware Region TGY
When I first plugged in the usb to my laptop I noticed that it was trying to install T999 drivers I was confused for a moment until it installed I9300 drivers. I then used CF-auto root , which to my surprise didn't work. So I tried Cf auto Root for T999 and again I was surprised...it worked. I then installed a app called CPU-identifier from google play store. I started it up and again to my surprise it said that my phone had S4 snapdragon 1.5 dual core, 2GB RAM inside - this was 3 days ago. Last night I had the S3 plugged in and was pasting Hyperdrive Rom to my SD card and I was about to flash. I rebooted my phone to TWRP 2.5( I had installed that one ) I was in and out of there multiple time for the past few days with no FC's. My phone just cut off... I retried to boot it and nothing. Tried download mode(volume down,menu and power) tried recovery (volume up, menu and power). When I plug it in without battery the red light comes on for a couple of minutes. Also when I plug it to my laptop it makes the reading noise but does not actually read anything. I tried reinstalling the drivers a few times.
I just don't understand why and also I can't figure out why it says it is an i9300 but has the S4 snapdragon processor. By the way even An-Tu-Tu say that it has S4 snapdragon inside. My 2 questions are 1) Is it possible to fix this? 2) Is it possible to have an I9300 with the S4 processor inside? Being that I'm 8000 miles from America I have no way of taking it back. Any help would be appreciated. I've also read about "sudden death" is this a possibility? Sorry for the long thread, just wanted to give all information.
http://forum.xda-developers.com/showthread.php?t=1757755
http://en.wikipedia.org/wiki/Samsung_Galaxy_S_III
What GPU does it have ??that may identify as above links show models .
ggsnyder0318 said:
I really hope someone can help. I have been reading XDA for a few years and had 1 thread and always read before asking. I recently purchased a Samsung Galaxy S3 I9300 from Amazon. I never had any problems with there service. I am from the US and am overseas for the next year. I had someone bring the phone to me. I decided to root my phone thinking it was an i9300 because that whats written on the back and also what it said inside the phone (settings-about phone).
GT-I9300
Android v 4.1.1
Firmware Build ID JRO03L
Firmware Build PDA I9300ZSEMC
Firmware Region TGY
When I first plugged in the usb to my laptop I noticed that it was trying to install T999 drivers I was confused for a moment until it installed I9300 drivers. I then used CF-auto root , which to my surprise didn't work. So I tried Cf auto Root for T999 and again I was surprised...it worked. I then installed a app called CPU-identifier from google play store. I started it up and again to my surprise it said that my phone had S4 snapdragon 1.5 dual core, 2GB RAM inside - this was 3 days ago. Last night I had the S3 plugged in and was pasting Hyperdrive Rom to my SD card and I was about to flash. I rebooted my phone to TWRP 2.5( I had installed that one ) I was in and out of there multiple time for the past few days with no FC's. My phone just cut off... I retried to boot it and nothing. Tried download mode(volume down,menu and power) tried recovery (volume up, menu and power). When I plug it in without battery the red light comes on for a couple of minutes. Also when I plug it to my laptop it makes the reading noise but does not actually read anything. I tried reinstalling the drivers a few times.
I just don't understand why and also I can't figure out why it says it is an i9300 but has the S4 snapdragon processor. By the way even An-Tu-Tu say that it has S4 snapdragon inside. My 2 questions are 1) Is it possible to fix this? 2) Is it possible to have an I9300 with the S4 processor inside? Being that I'm 8000 miles from America I have no way of taking it back. Any help would be appreciated. I've also read about "sudden death" is this a possibility? Sorry for the long thread, just wanted to give all information.
Click to expand...
Click to collapse
By the description you are giving that ur s3 has a snapdragon s4 processor ,a 2 gb ram it has to be a north american version(as u specified T999) because the int s3(i9300) has an 1.4ghz quad core processor with 1gb of ram so basically you cannot have an i9300 with a snapdragon s4 processor. i think it is the software as u say it shows i9300 in the settings but the CF-Auto root worked for T999. This is a very strange case! But if it is the hardware then u definitely cannot fix it (That is you cannot change the processor or the ram).But anyways it has to be the software ...ill try finding for similar cases and then leave some links for u to check .
SkywalkerZ said:
By the description you are giving that ur s3 has a snapdragon s4 processor ,a 2 gb ram it has to be a north american version(as u specified T999) because the int s3(i9300) has an 1.4ghz quad core processor with 1gb of ram so basically you cannot have an i9300 with a snapdragon s4 processor. i think it is the software as u say it shows i9300 in the settings but the CF-Auto root worked for T999. This is a very strange case! But if it is the hardware then u definitely cannot fix it (That is you cannot change the processor or the ram).But anyways it has to be the software ...ill try finding for similar cases and then leave some links for u to check .
Click to expand...
Click to collapse
Thanks for your quick response and any help would be great. I forgot to mention that in both cases where I tried to boot into download mode and recovery didn't work. I now think my phone may be bricked because when i plug it into PC it tries to install (QHSUSB_DLOAD). I googled it and they stated that when it does this it is bricked. I have no way to send to America to fix it. I just don't understand how that it is possible to get European phone with SGH T999 hardware-software.... very strange.
Another thing...if I can get odin to recognize it which firmware do I install, I9300 or T999? I believe that I need T999 because both An-Tu-Tu and CPU Identifier Id both came back with Qualcomm MSM8960 Snapdragon S4 Adreno 225. Thank for your time
Another quick question if I just successfully unbricked my fully bricked phone using debicked SGH t999 img file does that mean my firmware should be t999? Look at the following screen shots 2 were taken before the brick and 2 were taken a few minutes age. Any other answers for the confused Galaxy I own? Is this a normal thing a European I9300 with a T999 hardware and I9300 software? Someone please explain what to do now in Odin. Do I need to flash what my setting say? And if I do flash for I9300 won't it brick because of the CPU being Qualcomm Snapdragon S4? HELP ME! This has been driving me nuts....
JJEgan said:
http://forum.xda-developers.com/showthread.php?t=1757755
http://en.wikipedia.org/wiki/Samsung_Galaxy_S_III
What GPU does it have ??that may identify as above links show models .
Click to expand...
Click to collapse
Adreno 225
Does it have a pull out aerial .
JJEgan said:
Does it have a pull out aerial .
Click to expand...
Click to collapse
What in the world is that? Antenna?
ggsnyder0318 said:
What in the world is that? Antenna?
Click to expand...
Click to collapse
rootSU said:
Click to expand...
Click to collapse
I spent the last 18 hrs reading XDA and they have nothing to answer my question. That's why I'm asking on this thread. I rooted all my phones using XDA and have never bricked anything until now. Had one other thread til now. If you can't answer my question...you don't need to respond. I have read almost everything on I9300 and T999 didn't find no answers. If you can help I would love it if you can answer my question about what hardware to use now. Sense this thead I unbricked my phone. I hope you can help
ggsnyder0318 said:
I spent the last 18 hrs reading XDA and they have nothing to answer my question. That's why I'm asking on this thread. I rooted all my phones using XDA and have never bricked anything until now. Had one other thread til now. If you can't answer my question...you don't need to respond. I have read almost everything on I9300 and T999 didn't find no answers. If you can help I would love it if you can answer my question about what hardware to use now. Sense this thead I unbricked my phone. I hope you can help
Click to expand...
Click to collapse
You asked what is that and where shown a picture of what it is . What the f wrong with that .
I did ask the question for a very significant reason re the actual phone model and a previous similar post .
But after your post forget it you can go on the ignore list .
ggsnyder0318 said:
I spent the last 18 hrs reading XDA and they have nothing to answer my question. That's why I'm asking on this thread. I rooted all my phones using XDA and have never bricked anything until now. Had one other thread til now. If you can't answer my question...you don't need to respond. I have read almost everything on I9300 and T999 didn't find no answers. If you can help I would love it if you can answer my question about what hardware to use now. Sense this thead I unbricked my phone. I hope you can help
Click to expand...
Click to collapse
You asked what a pull out aerial is. The picture shows what a pull out aerial is. Ask a question, get an answer. That's how it works. Don't start getting cheeky now.
You have NOT got an i9300 as your hardware differs, ergo we cannot help.
JJEgan said:
You asked what is that and where shown a picture of what it is . What the f wrong with that .
I did ask the question for a very significant reason re the actual phone model and a previous similar post .
But after your post forget it you can go on the ignore list .
Click to expand...
Click to collapse
put me on you ignore list ...you didn't help anyway. All you had to say was yes use the I9300 firmware or yes use the T999 firmware. Instead you wasted around 60 words and didn't help at all.
rootSU said:
You asked what a pull out aerial is. The picture shows what a pull out aerial is. Ask a question, get an answer. That's how it works. Don't start getting cheeky now.
You have NOT got an i9300 as your hardware differs, ergo we cannot help.
Click to expand...
Click to collapse
I wasn't getting cheeky, I'm frustrated... but i guess you finally answered me in the end. This whole thing could have been resolved 3 or 4 posts back. Thanks
ggsnyder0318 said:
I wasn't getting cheeky, I'm frustrated... but i guess you finally answered me in the end. This whole thing could have been resolved 3 or 4 posts back. Thanks
Click to expand...
Click to collapse
Jje wanted to give you the answer "it's not an i9300, its xxxxxxx" but as he didn't get an answer about the aerial, he gave up on getting you the full answer. So it's been left as a half answer.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Pls Help
I'm facing the same problem i.e. settings>about device> says GT-I9300 while I go into download mode it says SGH-T999. All I want to confirm now is this:-
1) Can I root it using methods mentioned in xda forums of Galaxy S3 T-mobile i.e. here : http://forum.xda-developers.com/galaxy-s3-t-mobile ?
2)Can I install this ROM : http://forum.xda-developers.com/show....php?t=2176768 ?
EDIT : I rooted the phone using link 1, Now should I go for the roms mentioned in T-mobile S3 forum? Should I install the modem also?
hello everyone
sorry if i post to the wrong place. can some help me where can i find custom rom's for china mobile? i got an I-MOBILE I-STYLE Q2 DUO. i have just 1 custom rom for my phone and i would like to try other rom's as well. I got now an 4.2.2 MAUI 11 AMD W12.22 SP V5 P4
KERNEL 3.4.0 BUILD JB2 Q2DUO V1.1 021
THANKS
Its definately the wrong place my friend
And I am hearing your phone's name for the first time ..
I will report this to a mod so that he shifts it to a appropriate place so that may getter better help
Btw two things
Since its a china phone so dunt expect many custom roms
Make sure u know how to flash stock rom incase...
Re: just a question...
doctor_droid said:
Its definately the wrong place my friend
And I am hearing your phone's name for the first time ..
I will report this to a mod so that he shifts it to a appropriate place so that may getter better help
Btw two things
Since its a china phone so dunt expect many custom roms
Make sure u know how to flash stock rom incase...
Click to expand...
Click to collapse
i had few months ago an HTC wildfire s and i got some experience how to use CWM. i already flashed my phone with CWM and installed the modded 4.2.2 Jelly Bean and im really satisfied with it. I will really appreciate it if somebody can provide me a link or something where can i find more info about my china mobile..
Regards
Steven
steven81ir said:
i had few months ago an HTC wildfire s and i got some experience how to use CWM. i already flashed my phone with CWM and installed the modded 4.2.2 Jelly Bean and im really satisfied with it. I will really appreciate it if somebody can provide me a link or something where can i find more info about my china mobile..
Regards
Steven
Click to expand...
Click to collapse
Here u go
http://droidfriend.com/forums/index.php?board=119.0
thanks
doctor_droid said:
Here u go
http://droidfriend.com/forums/index.php?board=119.0[/QUO
thanks. i tried to access the same site but for a reason 2 days long wasnt available. thanks again
regards
Steven
Click to expand...
Click to collapse
Hello again. I need a little help again..
I got a Samsung Galaxy Note 3 (MT6572). My friend would like to buy from me for his daughter. But he need Slovakian language in the phone. Because this phone is from Thailand does not have too many European languages. Can somebody help me where can i find European ROM for this device?
Thanks
Hi there,
I haven't seen any files for rooting a Softbank Galaxy S6 Edge. Is there anything out there?
Softbank is one of the top four or five cellphone carriers in Japan.
From the android "about" screen:
model number 404sc
android version 5.0.2
baseband 404scscu1aof2
kernelversion 3.10.61-5183936
build number lrx22g.404scscu1aof2
From rebooting into the bootloader
product name sm-g925z
I've seen there are other (I suppose American/UK carrier) sm-g925_ files available for cf auto root, but apparently not the z model specifically.
As far as I'm aware I can't use a non-z file for my z-model phone without risking bricking the phone.
Is there anyone currently working on this? Is there anything I can do / check to use another file or to assist development on this z model?
Many thanks
Ben
bgaskin said:
Hi there,
I haven't seen any files for rooting a Softbank Galaxy S6 Edge. Is there anything out there?
Softbank is one of the top four or five cellphone carriers in Japan.
From the android "about" screen:
model number 404sc
android version 5.0.2
baseband 404scscu1aof2
kernelversion 3.10.61-5183936
build number lrx22g.404scscu1aof2
From rebooting into the bootloader
product name sm-g925z
I've seen there are other (I suppose American/UK carrier) sm-g925_ files available for cf auto root, but apparently not the z model specifically.
As far as I'm aware I can't use a non-z file for my z-model phone without risking bricking the phone.
Is there anyone currently working on this? Is there anything I can do / check to use another file or to assist development on this z model?
Many thanks
Ben
Click to expand...
Click to collapse
I'm in the same boat as you I've been searching on xda and the web for any root access to the 404sc. Got my s6 edge from Softbank too. If you found a solution let me know and I'll do the same. Also what part of Japan are you from?
Thanks again.
primod808 said:
I'm in the same boat as you I've been searching on xda and the web for any root access to the 404sc. Got my s6 edge from Softbank too. If you found a solution let me know and I'll do the same. Also what part of Japan are you from?
Thanks again.
Click to expand...
Click to collapse
Cheers, good idea. I'm from New Zealand but I've been living in Nagoya the last two years.
bgaskin said:
Cheers, good idea. I'm from New Zealand but I've been living in Nagoya the last two years.
Click to expand...
Click to collapse
I'm staying in Toyohashi.
Just a heads up still have not found a way to root the 404sc but we may be able to flash a unbranded Samsung firmware that would be 5.1.1.
rooting
hai, still can't root s6 edge softbank (404sc) ? maybe this will help you to rooting. Just try with twrp recovery. And use twrp 2.8.6.0 (chinese - zeroltezt).
its work 100% for me.
dikmutun said:
hai, still can't root s6 edge softbank (404sc) ? maybe this will help you to rooting. Just try with twrp recovery. And use twrp 2.8.6.0 (chinese - zeroltezt).
its work 100% for me.
Click to expand...
Click to collapse
Thanks dikmutun for the suggestion but to install twrp recovery you have to be rooted first. Do you own a 404sc and are using softbank? If you have have root please tell us the procedure so we can share this with other 404sc users.
primod808 said:
Thanks dikmutun for the suggestion but to install twrp recovery you have to be rooted first. Do you own a 404sc and are using softbank? If you have have root please tell us the procedure so we can share this with other 404sc users.
Click to expand...
Click to collapse
Just follow this steps ( galaxys6root.highonandroid.com/galaxy-s6-root-news/how-to-root-galaxy-s6-or-s6-edge-with-twrp-recovery/ ) with using this twrp ( twrp.me/devices/samsunggalaxys6edgechina.html ) ,yes im using softbank carrier (404sc/SM G925Z)
dikmutun said:
Just follow this steps ( galaxys6root.highonandroid.com/galaxy-s6-root-news/how-to-root-galaxy-s6-or-s6-edge-with-twrp-recovery/ ) with using this twrp ( twrp.me/devices/samsunggalaxys6edgechina.html ) ,yes im using softbank carrier (404sc/SM G925Z)
Click to expand...
Click to collapse
Please take a screen shot of your about phone setting with model number and a screen shot of SU installed. Also did you use odin to flash? This is to show root was successful and I will proceed.
Thanks again.
[/HTML]
primod808 said:
Please take a screen shot of your about phone setting with model number and a screen shot of SU installed. Also did you use odin to flash? This is to show root was successful and I will proceed.
Thanks again.
Click to expand...
Click to collapse
( s173.photobucket.com/user/Wazahry_Yahya/media/Screenshot_2015-09-16-13-43-08_zpss49pzpsd.png.html ) ( s173.photobucket.com/user/Wazahry_Yahya/media/Screenshot_2015-09-16-13-42-09_zpsvkcm4yzp.png.html ) , yes i did with odin to flash.
Sorry i dont know how to insert a picture, because i just made this account hehe
dikmutun said:
[/HTML] ( s173.photobucket.com/user/Wazahry_Yahya/media/Screenshot_2015-09-16-13-43-08_zpss49pzpsd.png.html ) ( s173.photobucket.com/user/Wazahry_Yahya/media/Screenshot_2015-09-16-13-42-09_zpsvkcm4yzp.png.html ) , yes i did with odin to flash.
Sorry i dont know how to insert a picture, because i just made this account hehe
Click to expand...
Click to collapse
Do you live in Japan?
primod808 said:
Do you live in Japan?
Click to expand...
Click to collapse
No, im in indonesian.
dikmutun said:
No, im in indonesian.
Click to expand...
Click to collapse
Thanks for the responce so you use Japan softbank phone in indonesia? Is the LTE BANDS the same as Japan LTE? I looked at the website you suggested but was difficult to follow tell your procedure if you can again. If your rooted I don't think you can get OTA now. On a different subject have you found a way to unlock your boooader?
Did you also try flashing the Hong Kong 9250 stock rom for the 404sc?
dikmutun's advice works, thanks!
Update from original poster. Problem solved. I used dikmutun's exact advice below for downloading Odin and the Chinese TWRP tar file.
I got root with no problems.
After a bit more playing around with root apps, I can now tether my cellphone data to wifi hotspot, edit my APN, backup my apps with titanium backup.
Thanks!
bgaskin said:
Hi there,
I haven't seen any files for rooting a Softbank Galaxy S6 Edge. Is there anything out there?
Softbank is one of the top four or five cellphone carriers in Japan.
From the android "about" screen:
model number 404sc
android version 5.0.2
baseband 404scscu1aof2
kernelversion 3.10.61-5183936
build number lrx22g.404scscu1aof2
From rebooting into the bootloader
product name sm-g925z
I've seen there are other (I suppose American/UK carrier) sm-g925_ files available for cf auto root, but apparently not the z model specifically.
As far as I'm aware I can't use a non-z file for my z-model phone without risking bricking the phone.
Is there anyone currently working on this? Is there anything I can do / check to use another file or to assist development on this z model?
Many thanks
Ben
Click to expand...
Click to collapse
Thanks, this advice worked perfectly!
Thanks, this advice worked perfectly!
dikmutun said:
Just follow this steps ( galaxys6root.highonandroid.com/galaxy-s6-root-news/how-to-root-galaxy-s6-or-s6-edge-with-twrp-recovery/ ) with using this twrp ( twrp.me/devices/samsunggalaxys6edgechina.html ) ,yes im using softbank carrier (404sc/SM G925Z)
Click to expand...
Click to collapse
questions/feedback please
hey guys,
Glad to see some Softbank's GS6 Edge users here.
I am thinking also of getting this phone from Softbank this coming Nov. 2015.
But I am still thinking about it since I am reading a lot of users having some problems with it especially Battery life, RAM management and Lags.
Since you already have the GS6 Edge, how was it?
Are you encountering those problems or issues?
Would you please give some feedbacks based on your actual usage?
Thanks a lot in advance.
g.b.a. said:
hey guys,
Glad to see some Softbank's GS6 Edge users here.
I am thinking also of getting this phone from Softbank this coming Nov. 2015.
But I am still thinking about it since I am reading a lot of users having some problems with it especially Battery life, RAM management and Lags.
Since you already have the GS6 Edge, how was it?
Are you encountering those problems or issues?
Would you please give some feedbacks based on your actual usage?
Thanks a lot in advance.
Click to expand...
Click to collapse
The main issue is battery life if your a medium to heavy user be prepared to have a portable charger by mid day. If your a light user you should be able to not charge until later on the evening. Great phone just the battery life could be better. On a side note if you decide to get it get the gold color looks sweet. Never get tired at look in at my phone!
primod808 said:
The main issue is battery life if your a medium to heavy user be prepared to have a portable charger by mid day. If your a light user you should be able to not charge until later on the evening. Great phone just the battery life could be better. On a side note if you decide to get it get the gold color looks sweet. Never get tired at look in at my phone!
Click to expand...
Click to collapse
Hi Primod808,
Thanks for the feedback.
If battery is the only main problem, i think i can deal with it since i am always carrying a powerbank.
My great concern is the lag or sluggishness.
Are you encountering it? Is it tolerable?
I still have some more questions if you don't mind.
What was your phone before the GS6?
How long you've been using your GS6?
Have you successfully rooted it?
If yes, is it possible to remove all Softbank's unnecessary Apps?
I am very sorry for so many questions.
By the way, yes, just in case i'll be getting the GS6, i am planning to get the gold platinum color also.
Thank you in advance.
I have a 404sc model JP Galaxy s6.
I used this method to get root access.
I can detect no problems at all.
I do not use the standard touchwiz **** UI.
I use ADW-EX launcher. by far the best Ive seen
RecIV said:
I have a 404sc model JP Galaxy s6.
I used this method to get root access.
I can detect no problems at all.
I do not use the standard touchwiz **** UI.
I use ADW-EX launcher. by far the best Ive seen
Click to expand...
Click to collapse
Which method did you use and?
And I didn't find 404sc model in cf auto root page. For which model you download the software and got success?
Please post in detail..
---------- Post added at 01:22 AM ---------- Previous post was at 01:16 AM ----------
Someone please post a specific link of cf auto root file for Samsung Galaxy s6 edge ((404sc))Softbank Japan.
I'm not able to root yet.
Hey so I was hoping someone could help me root my samsung galaxy s6, I know it's a super old phone but I don't think you need the new one every year. I only want a method that involves using an apk since im too lazy to use a pc. I am running 7.0 and my base band version is g920aucu6aqc1. I have been searching for a while now and none have worked so if you know of one or can make one that would be much appreciated. :fingers-crossed:
isaJoe said:
Hey so I was hoping someone could help me root my samsung galaxy s6, I know it's a super old phone but I don't think you need the new one every year. I only want a method that involves using an all since im too lazy to use a pc. I am running 7.0 and my base band version is g920aucu6aqc1. I have been searching for a while now and none have worked so if you know of one or can make one that would be much appreciated. :fingers-crossed:
Click to expand...
Click to collapse
Install AIDA64 app from playstore...
And open that and go to System, search for Device, Product....
then your problem will be solved
....
That name is known as codename....
It is important if you are flashing custom roms/kernels also....
See and post below your device codename
The codename is zero F
isaJoe said:
The codename is zero F
Click to expand...
Click to collapse
I think you know your device forum link...https://forum.xda-developers.com/galaxy-s6
Go to your device forum and search there or post there for better guidance....