Related
I've done all the searching I can and the only thing that I've been able to find are requests for this type of functionality, but no apps to provide it. Would anyone be interested in developing an app/service that would recognize the event of putting the phone into a holster with magnetic clip and trigger a lock screen? Conversely, the app/service would notice removal from holster and unlock screen.
This is a function of some blackberry devices and has got to be the thing I miss the most after switching over.
Would be pretty much impposblie since the blackberries have a magnetic switch built in
LancerV said:
Would be pretty much impposblie since the blackberries have a magnetic switch built in
Click to expand...
Click to collapse
yeah, i believe the only magnetic device in the phone is for dock recognition and no holsters are designed to interact with that.
Yeah I had read in some other threads about android phones confusing holsters for docks and was hoping that you could capture that magnetic trigger and tell the phone to lock screen.
The only magnetic sensor on the Atrix is the compas.
barry99705 said:
The only magnetic senson on the Atrix is the compas.
Click to expand...
Click to collapse
not that type of magnetic sensor..
dLo GSR said:
not that type of magnetic sensor..
Click to expand...
Click to collapse
I know. That's why it wont work.
barry99705 said:
I know. That's why it wont work.
Click to expand...
Click to collapse
no, there is one for sensing the dock.
dLo GSR said:
no, there is one for sensing the dock.
Click to expand...
Click to collapse
incorrect, the atrix unlike droidx uses software, and hdmi plus extra events to trigger docks and appropriate modes not magnets
Yup. No magnets in Atrix. Proximity sensor could probably work for this purpose???
Sent from my MB860 using XDA App
try killswitch. it is made for tablets and phones. that might work for you as it uses several different sensors to work.
ehvio said:
Yup. No magnets in Atrix. Proximity sensor could probably work for this purpose???
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
I was thinking something along the lines of the new iPad locking and unlocking when covered. Could something like this be pulled off on the Atrix?
bearsfan172 said:
I was thinking something along the lines of the new iPad locking and unlocking when covered. Could something like this be pulled off on the Atrix?
Click to expand...
Click to collapse
That functionality doesn't come from a proximity sensor, it comes from magnets placed in the covers as well as the front of the iPad.
Thread moved to Q&A.
jkurl said:
try killswitch. it is made for tablets and phones. that might work for you as it uses several different sensors to work.
Click to expand...
Click to collapse
Thanks, accelerometer works to lock screen when the phone is face down but the proximity and light sensors don't seem to be very responsive at all.
Using elixir from the market the proximity sensor is listed as being present. Where is it and why does it not display any values?
Sent from my Transformer Prime TF201 using Tapatalk
ffyter said:
Using elixir from the market the proximity sensor is listed as being present. Where is it and why does it not display any values?
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
Something seems to be wrong with my proximity sensor as well..it worked before but since .13 (now on .15 and still not working)..It was working back when I was on .11.1 though.
I know this because I was trying out apps like Smart Screen Pro etc. which turn off the screen when the sensor is covered and all.
Now apps like those don't work for me anymore...and I got AndroSensor to check on my device sensors and the Proximity Sensor sometimes says failed to start, while other times it says "Waiting for event" either way, it never works now
Any help with this?
On my SGS, I had a problem with accelerometer before and I just had to delete a file and let the system recreate it and the problem was fixed. Perhaps something similar can be done with the proximity sensor since it's kinda similar to the accelerometer in the sense that well..they're both sensors of some sort lol
While it actually has a chip that supports the proximity sensor (and thus reports having one), the chip is only used for the ambient light sensor. It doesn't have a proximity sensor.
chamberc said:
While it actually has a chip that supports the proximity sensor (and thus reports having one), the chip is only used for the ambient light sensor. It doesn't have a proximity sensor.
Click to expand...
Click to collapse
Ohhh thanks for the info! I soon realized this as well when I was looking through the apps I was testing out before.. Turns out they were using light sensor and not proximity. D'oh!
Oh well, a proximity sensor on a big tablet doesn't make much sense come to think of it.
Ya it does light sensors use more energy than proximity sensors and control via cover state is quite desirable
flemdroid said:
Ya it does light sensors use more energy than proximity sensors and control via cover state is quite desirable
Click to expand...
Click to collapse
The Prime has a cover state sensor, its magnetic just like that other tablet it is close to the webcam. It is used by the dock to turn off the screen when you close it.
Why no other covers are using it... I have no idea.
Zephyrot said:
The Prime has a cover state sensor, its magnetic just like that other tablet it is close to the webcam. It is used by the dock to turn off the screen when you close it.
Why no other covers are using it... I have no idea.
Click to expand...
Click to collapse
There are some reports that the magnetic sensor only works when the dock is connected. If thats true then one would have to find a way to trick the tablet into turning on the mag sensor manually before it would be any use.
There were some people wanting to use tasker to check the status of the mag sensor for various reasons, detect if its in a case, etc. but they had minimal luck.
Zephyrot said:
The Prime has a cover state sensor, its magnetic just like that other tablet it is close to the webcam. It is used by the dock to turn off the screen when you close it.
Why no other covers are using it... I have no idea.
Click to expand...
Click to collapse
That's a ambient light sensor.
chamberc said:
That's a ambient light sensor.
Click to expand...
Click to collapse
Hrm. No.
I have tested this already myself, going to mod my leather case to allow a small magnet on it so the screen turns off when i close it.
The right spot is tricky to find, but it is there, it works and the dock does not have to be connected for it to work.
You can try it yourself, get one of those weak magnets from the freezer and put it around the frontal camera until the screen turns off. Just remember to deactivate the auto-off timer first
Nope. It does not have one.
Zephyrot said:
Hrm. No.
I have tested this already myself, going to mod my leather case to allow a small magnet on it so the screen turns off when i close it.
The right spot is tricky to find, but it is there, it works and the dock does not have to be connected for it to work.
You can try it yourself, get one of those weak magnets from the freezer and put it around the frontal camera until the screen turns off. Just remember to deactivate the auto-off timer first
Click to expand...
Click to collapse
Can you post a pic with the EXACT placement if this sensor, if it exists?
I have rubbed a magnet over every inch of my Prime and the screen never turns off because of it. With regards to the dock it makes much more sense that a mechanical switch would dictate when the screen turns off, since this would be more reliable and since the dock hinge can function like a switch, and the dock plugs directly into the tablet usurping certain tablet functions so it wold be easy to make the dock take over the function of the power button in certain conditions.
almightywhacko said:
Can you post a pic with the EXACT placement if this sensor, if it exists?
I have rubbed a magnet over every inch of my Prime and the screen never turns off because of it. With regards to the dock it makes much more sense that a mechanical switch would dictate when the screen turns off, since this would be more reliable and since the dock hinge can function like a switch, and the dock plugs directly into the tablet usurping certain tablet functions so it wold be easy to make the dock take over the function of the power button in certain conditions.
Click to expand...
Click to collapse
Ill make one once i get home
---------- Post added at 07:59 AM ---------- Previous post was at 07:54 AM ----------
chamberc said:
Nope. It does not have one.
Click to expand...
Click to collapse
It makes absolute no sense to use an ambient light sensor to turn off a screen. Going from a room or a place with a bit of light into a dark room would turn the screen off.
There are 2 holes on the top of the prime bezel. One is the frontal camera, the other the light sensor. The magnet is not there.
If you are facing your Prime it is to the right and a bit down of your frontal camera.
The manget is in the dock right off the track pad.
You can get the exact location with a paper clip. it will stick there.
So, here is the video...
Sadly like other user noticed, it does not work without the dock Probably happened after one of the updates, cause it was working without dock before.
I found the spot myself.
On my BBOK Transformer Prime, the magnetic sensor is just to the right of the camera, but about one inch down into the screen area. If you play with with the keyboard using a magnet you can find a magnet under the right end of the spacebar.
Unfortunately I can confirm that the tablet won't turn off in this way without the keyboard dock connected.
In the app Sensor List there is listed a proximity sensor, however I have only heard of people saying the Prime has no such sensor.
The sensor is listed as: Intersil isl29018 Proximity sensor
It doesn't seem like the app can get any readings from the sensor though. Is my sensor broken or what?
Dont see why the TP would need a proximity sensor, its not like your gunna be putting your face on it !
The app is probs just detecting the light sensor as the proximity sensor or similar ..
SirGarry said:
In the app Sensor List there is listed a proximity sensor, however I have only heard of people saying the Prime has no such sensor.
The sensor is listed as: Intersil isl29018 Proximity sensor
It doesn't seem like the app can get any readings from the sensor though. Is my sensor broken or what?
Click to expand...
Click to collapse
The TP has no proximity sensor.
chamberc said:
The TP has no proximity sensor.
Click to expand...
Click to collapse
Then how do you explain the listing of "Intersil isl29018 Proximity sensor"? Other apps list the same thing. Try it.
Elixir 2 lists a proximity sensor as well, and actually shows it as active and drawing power. But, the app doesn't show it as responding. So, who knows? Maybe proximity sensor functionality is part of a multipurpose sensor, only there's no component to actually take the required readings?
Actually, yes, that's my guess. That part number is a light and proximity sensor, and there's likely just a component to enabling the light sensor part.
http://www.intersil.com/products/deviceinfo.asp?pn=ISL29018
SirGarry said:
Then how do you explain the listing of "Intersil isl29018 Proximity sensor"? Other apps list the same thing. Try it.
Click to expand...
Click to collapse
Already have tried it. The TP doesn't have a proximity sensor.
chamberc said:
Already have tried it. The TP doesn't have a proximity sensor.
Click to expand...
Click to collapse
Actually, you're wrong. The Prime has a proximity sensor--only it's a light and proximity sensor (check out my link above). The proximity sensor functionality simply isn't enabled in the Prime.
wynand32 said:
Actually, you're wrong. The Prime has a proximity sensor--only it's a light and proximity sensor (check out my link above). The proximity sensor functionality simply isn't enabled in the Prime.
Click to expand...
Click to collapse
Wrong. There is a light sensor, but it isn't a proximity sensor. Check the FCC materials.
actually i think the prima has one.
I think it is inside the dock. Because androsensor (app from the market) gives me an error on this sensor when the dock is not pluged in.
When i plug my tablet in the sensor says no signal.
Can be a bug, but mayby the dock uses the sensor in the hinge to see if it's open or closed?
There has to be the sensor its used when you close the tablet when plugged into the dock that's how it now to shut the screen off
tylermaciaszek said:
There has to be the sensor its used when you close the tablet when plugged into the dock that's how it now to shut the screen off
Click to expand...
Click to collapse
This could be the case, that it only activates it when coupled with the dock. However, pretty sure I haven't heard of people accidentally putting it to sleep using its touch-screen while docked, so I doubt this is the case; more likely there's a mechanical switch on the dock that let's the Prime know when to turn the screen off.
As linked above, the proximity sensor is one and the same with your light sensor (pretty sure it's like this on my phone too... will have to have a look just to be sure). We just have no need for it to be used: that being said, I wonder if dev's can unlock it just for the hell of it
chamberc said:
Already have tried it. The TP doesn't have a proximity sensor.
Click to expand...
Click to collapse
wynand32 said:
Actually, you're wrong. The Prime has a proximity sensor--only it's a light and proximity sensor (check out my link above). The proximity sensor functionality simply isn't enabled in the Prime.
Click to expand...
Click to collapse
chamberc said:
Wrong. There is a light sensor, but it isn't a proximity sensor. Check the FCC materials.
Click to expand...
Click to collapse
Selhati said:
actually i think the prima has one.
I think it is inside the dock. Because androsensor (app from the market) gives me an error on this sensor when the dock is not pluged in.
When i plug my tablet in the sensor says no signal.
Can be a bug, but mayby the dock uses the sensor in the hinge to see if it's open or closed?
Click to expand...
Click to collapse
all wrong. the Prime doesnt exist.
/argument
Easy test
buxtahuda said:
This could be the case, that it only activates it when coupled with the dock. However, pretty sure I haven't heard of people accidentally putting it to sleep using its touch-screen while docked, so I doubt this is the case; more likely there's a mechanical switch on the dock that let's the Prime know when to turn the screen off.
As linked above, the proximity sensor is one and the same with your light sensor (pretty sure it's like this on my phone too... will have to have a look just to be sure). We just have no need for it to be used: that being said, I wonder if dev's can unlock it just for the hell of it
Click to expand...
Click to collapse
Easy to prove/disprove. O have tried it when I 1st got the Prime. Put it in the dock. Close it most of the way, leaving it open about an inch or so. Put your finger over the light sensor (about 2 inches to the left of the camera) It does NOT put it in sleep mode. Close it the rest of the way. It goes to sleep. Shine a bright halogen light in to the area at top of screen, after just cracking the tablet and doc apart a fraction. It does NOT come out of sleep. There seems to be a mechanical switch in the hinge. Which I am not very thrilled about. Too easy to break, the light sensor would probably have been more durable. Another great engineering decision by Asus, going for the "Persistent Perfection" or a reasonable workaround to simulate it, LOL!
SmartAs$Phone said:
Easy to prove/disprove. O have tried it when I 1st got the Prime. Put it in the dock. Close it most of the way, leaving it open about an inch or so. Put your finger over the light sensor (about 2 inches to the left of the camera) It does NOT put it in sleep mode. Close it the rest of the way. It goes to sleep. Shine a bright halogen light in to the area at top of screen, after just cracking the tablet and doc apart a fraction. It does NOT come out of sleep. There seems to be a mechanical switch in the hinge. Which I am not very thrilled about. Too easy to break, the light sensor would probably have been more durable. Another great engineering decision by Asus, going for the "Persistent Perfection" or a reasonable workaround to simulate it, LOL!
Click to expand...
Click to collapse
while the light sensor would have been more durable, it would also prevent deep sleep mode as the OS would have to constantly read the state of the light sensor for keeping screen off and for turning it on immediately upon opening docked tablet.
Magnetic
I think the Prime has a magnetic open/close detection system.
In a hardware thread someone observed that the Prime will switch off the screen if a magnet is placed in the upper left quadrant. And since the dock is quite magnetic right of the touch pad it seems to fit. I never tried it with a magnet myself though.
SirGarry said:
Then how do you explain the listing of "Intersil isl29018 Proximity sensor"? Other apps list the same thing. Try it.
Click to expand...
Click to collapse
There use to be a GPS sensor listed in the specifications too. I'm guessing if it doesn't work - it will just mysteriously disappear.
SmartAs$Phone said:
Easy to prove/disprove. O have tried it when I 1st got the Prime. Put it in the dock. Close it most of the way, leaving it open about an inch or so. Put your finger over the light sensor (about 2 inches to the left of the camera) It does NOT put it in sleep mode. Close it the rest of the way. It goes to sleep. Shine a bright halogen light in to the area at top of screen, after just cracking the tablet and doc apart a fraction. It does NOT come out of sleep. There seems to be a mechanical switch in the hinge. Which I am not very thrilled about. Too easy to break, the light sensor would probably have been more durable. Another great engineering decision by Asus, going for the "Persistent Perfection" or a reasonable workaround to simulate it, LOL!
Click to expand...
Click to collapse
Eh, I think I'd hate using a proximity sensor for this. The explanations about magnets is interesting, and definitely not an easily-broken method.
Really though, I plan to use my touch screen even when docked and would be pissed trying to swype/tap/play anything and accidentally send the tablet to sleep.
If there is no light sensor how do you explain the "auto" brightness? It has to be sensing something from somewhere. Unless we're talking about something else here.... cuz i kinda just skimmed through the posts..... >_>
Hello,it seems there is no Q&A forum for this device, so here is my doubt:
Although the tech manual for the xperia S from the sony website report a proximity sensor, I fail to find one on my phone.
There seems to be a black oval spot on the glass next to the light sensor as if some sort of sticker can be removed to install the sensor.
The light sensor seems to work, since I've seen the screen go darker and brighter, but when I'm in a call and put the phone in my ear the screen wont shut off like in my old SGS nor will it turn on when I move the phone away from my face.
are your phones like mine? or is mine a defective unit?
I guess ur device has something wrong with it.
By the way; did u place a screen protector?? Coz if u did that may be the problem!
I think the light and proximity sensor are the same.
There is something wrong with your phone,maybe you should try to flash a new firmware.
Sent from my LT26i using Tapatalk 2
grained said:
Hello,it seems there is no Q&A forum for this device, so here is my doubt:
Although the tech manual for the xperia S from the sony website report a proximity sensor, I fail to find one on my phone.
There seems to be a black oval spot on the glass next to the light sensor as if some sort of sticker can be removed to install the sensor.
The light sensor seems to work, since I've seen the screen go darker and brighter, but when I'm in a call and put the phone in my ear the screen wont shut off like in my old SGS nor will it turn on when I move the phone away from my face.
are your phones like mine? or is mine a defective unit?
Click to expand...
Click to collapse
Hi,
Mine works fine...
Do this:
1>Go to dialpad and type *#*#7378423#*#* (*#*#SERVICE#*#*)
2>A menu pops up in that u will see service tests select that
3>Then scroll down and select Proximity Switch
4>Initially it will display as OFF. Now u place your finger or hand on the Proximity Sensor, then the value of Proximity Switch on the screen will change to ON.
If this is working then the sensor is just fine u need to update the firmware else u need to go and replace the piece IMO though.
Thank you all for the feedback.
I used the service menu to check the sensors ...
indeed the proximity sensor is always off, even when I put my finger on it, it seems someone forgot to remove the black paint from behind the glass, but I will update it anyway to make sure before returning it.
grained said:
Thank you all for the feedback.
I used the service menu to check the sensors ...
indeed the proximity sensor is always off, even when I put my finger on it, it seems someone forgot to remove the black paint from behind the glass, but I will update it anyway to make sure before returning it.
Click to expand...
Click to collapse
sensor is IR, so darkened window is normal for it. but if it have always closed windows - than its status must be always ON. so, most likely you have faulty sensor (or bug in firmware)
goodwin_c said:
sensor is IR, so darkened window is normal for it. but if it have always closed windows - than its status must be always ON. so, most likely you have faulty sensor (or bug in firmware)
Click to expand...
Click to collapse
Hi,
Exactly it should be showing status as ON if it's covered replace the piece as soon as possible
shoz_on4u said:
Hi,
Exactly it should be showing status as ON if it's covered replace the piece as soon as possible
Click to expand...
Click to collapse
If it was covered by the glass/ cover it would show OFF because the glass doesn't radiate heat like your body does.
Sent from the Delta Quadrant using a transwarp conduit.
Pezo said:
If it was covered by the glass/ cover it would show OFF because the glass doesn't radiate heat like your body does.
Sent from the Delta Quadrant using a transwarp conduit.
Click to expand...
Click to collapse
Proximity sensor on phones does not react to heat. It have simple IR transmitter, which emits a beam, and IR sensor, which react on reflected beam.
goodwin_c said:
Proximity sensor on phones does not react to heat. It have simple IR transmitter, which emits a beam, and IR sensor, which react on reflected beam.
Click to expand...
Click to collapse
You are right, just tested it and it seems to be a reflective sensor.
thanks for the tips, it was indeed a faulty sensor and they gave me a new phone right away .
I hope I don't get any more problems like a yellow tint :X (knock on wood with fingers crossed)
I had a bunch of requests for Wave Control to have this functionality. I thought it best to do a dedicated app so here it is!
Flip Case Control was designed to work with Samsung's Flip Case on the I9300 while using as little battery as possible. (I left it running all night ~8.5 hours and the battery dipped 1% more than usual)
IMPORTANT: If your case is black or dark on the inside, the sensor doesn't read correctly when the case is closed. To fix this, put a piece of light colored tape on the inside of the case where it lines up with the sensor (located next to the front camera)
Note: A Samsung based ROM is required. CM won't work well.
Here's a demo video:
Play Store Links:
24 Hour Trial Version
Full Version
Could you guys with the Flip Case test it out?
All feedback is appreciated greatly!
I would like to try it for you but unfortunately i don't have flipping cover for this lovely device as it is not here yet everyday im searching everywhere but nothing
Waiting OP to give us their opinion about this app
Sent from my GT-N7100 using Tapatalk 2
I have the combination.Let me try it and i ll report back
edit: works fine with stock rom and flip case.
Sent from my Galaxy Nexus using Tapatalk 2
afilopou said:
I have the combination.Let me try it and i ll report back
edit: works fine with stock rom and flip case.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Great, thanks for letting me know!
Is there something special about Samsung's Flip Case? I have a generic flip case but can't get this to work. Running rooted Deodexed LJ1.
dosher said:
Is there something special about Samsung's Flip Case? I have a generic flip case but can't get this to work. Running rooted Deodexed LJ1.
Click to expand...
Click to collapse
There shouldn't be but it is conceivable that if the case surface facing the proximity sensor is black and absorbs too much of the IR from the LED on the prox sensor then it wouldn't register a near reading.
The proximity sensor is an IR LED and light sensor. It detects distance by the amount of IR light that get reflected back off the surface in front of the sensor.
If this is the case, you could try to put a piece a light colored tape on the inside of the case where it lines up with the sensor.
Let me know if this works. What's brand of your case?
MarksThinkTank said:
There shouldn't be but it is conceivable that if the case surface facing the proximity sensor is black and absorbs too much of the IR from the LED on the prox sensor then it wouldn't register a near reading.
The proximity sensor is an IR LED and light sensor. It detects distance by the amount of IR light that get reflected back off the surface in front of the sensor.
If this is the case, you could try to put a piece a light colored tape on the inside of the case where it lines up with the sensor.
Let me know if this works. What's brand of your case?
Click to expand...
Click to collapse
I bought the full version ystd. Yes it does work sith my rock flip case but i had uninstalled ot as it does turn off my screen for no obvious reason when im using it.
Hopefully you can come up with a fix for it soon
MarksThinkTank said:
There shouldn't be but it is conceivable that if the case surface facing the proximity sensor is black and absorbs too much of the IR from the LED on the prox sensor then it wouldn't register a near reading.
The proximity sensor is an IR LED and light sensor. It detects distance by the amount of IR light that get reflected back off the surface in front of the sensor.
If this is the case, you could try to put a piece a light colored tape on the inside of the case where it lines up with the sensor.
Let me know if this works. What's brand of your case?
Click to expand...
Click to collapse
It's a cheapo from ebay until I can find a decent one...
http://www.ebay.co.uk/itm/Samsung-G...sPouches&var=540094094344&hash=item4d05abf35b
But you're right - the sensor doesn't like black. If I use a piece of lighter coloured tape on the inside of the cover it works! The only issue I have now is that the app is not auto loading at boot.
Jaemon said:
I bought the full version ystd. Yes it does work sith my rock flip case but i had uninstalled ot as it does turn off my screen for no obvious reason when im using it.
Hopefully you can come up with a fix for it soon
Click to expand...
Click to collapse
I'm working on an update right now to help reduce the unintentional triggers. I need to test it a little bit more but it should be out soon.
dosher said:
It's a cheapo from ebay until I can find a decent one...
http://www.ebay.co.uk/itm/Samsung-G...sPouches&var=540094094344&hash=item4d05abf35b
But you're right - the sensor doesn't like black. If I use a piece of lighter coloured tape on the inside of the cover it works! The only issue I have now is that the app is not auto loading at boot.
Click to expand...
Click to collapse
Are you running the full version? I limited that function to that version. Great to hear the tape fix worked
According to me proximity autolock works well and it is available on play store
Sent from my GT-N7000 using xda premium
It works OK at the moment, I think the sensitivity should be decreased though as something passing an inch or two above the proximity sensor will still turn off the screen. Seeing as flip covers get up close and personal with the proximity sensor this seems a bit too sensitive.
EDIT: Definitely too sensitive, seems to turn off at random at times. Just had a phase where it wouldn't let me keep the screen on.
Maybe a failsafe of sorts could be implemented? Leave the screen on until timeout/power button press if turned on by the power button?
Edit 2: I uninstalled the app to stop it turning the screen off constantly, but it continued even after a reboot, I went into the display settings and saw the screen timeout had been changed to "()"and this was causing the issue, as soon as I changed it back to 30 seconds it was fine. Is this supposed to happen?
MarksThinkTank said:
Are you running the full version? I limited that function to that version. Great to hear the tape fix worked
Click to expand...
Click to collapse
Yeah, just running the trial version - that explains it.
D3_ said:
It works OK at the moment, I think the sensitivity should be decreased though as something passing an inch or two above the proximity sensor will still turn off the screen. Seeing as flip covers get up close and personal with the proximity sensor this seems a bit too sensitive.
EDIT: Definitely too sensitive, seems to turn off at random at times. Just had a phase where it wouldn't let me keep the screen on.
Maybe a failsafe of sorts could be implemented? Leave the screen on until timeout/power button press if turned on by the power button?
Edit 2: I uninstalled the app to stop it turning the screen off constantly, but it continued even after a reboot, I went into the display settings and saw the screen timeout had been changed to "()"and this was causing the issue, as soon as I changed it back to 30 seconds it was fine. Is this supposed to happen?
Click to expand...
Click to collapse
Ah.. crap. I thought I fixed that bug before I released it. I guess there's still a way for that to happen.
I'm working on an update to help filter out false triggers and will patch that bug. It shouldn't happen. Sorry.
garvit18 said:
According to me proximity autolock works well and it is available on play store
Click to expand...
Click to collapse
Proximity Autolock is a nice app with some excellent features but uses too much battery on The Note 1, an additional 8% overnight. And it doesn't work well on my Note 2.
The app works well. I bought it
It's a very useful feature that Samsung should have built in, but hey, I don't mind supporting you.
Gnarfsan said:
The app works well. I bought it
It's a very useful feature that Samsung should have built in, but hey, I don't mind supporting you.
Click to expand...
Click to collapse
Thanks!
I agree Samsung should have made this app. When I first showed it to a friend, he said "Isn't it already supposed to do that?"
A Beta
Here's what I'm playing with right now.
It should hopefully fix the bug D3_ ran into as well as reduce the false triggers. There will still be some due to sensor placement but this should make it much less sensitive. Also response time to turn on the screen should be a little bit faster. It's working well on my I9300, hopefully it should be the same on the Note II.
Let me know if this is performing better for you guys.
Still coming:
Disable in Landscape Mode
Disable when plugged in
[Edit: Removed Old Beta]
Just installed the beta, will report back after some use of it.
V1.05
Just uploaded version 1.05 to the Play Store
Changes:
Reduced false triggers for screen off
Changed button UI
Added notice about dark cases
Updated icon
Sped up screen on response a little bit
Cant you just do this using Tasker? I already spent money on the flip cover, so kinda hesitant to spend more for this functionality (which should be there in the first place!)