I have been searching for a while as to how I can use my wii remote with classic controller hooked up to it for FPSe. It works for PSX4Droid, until I updated to 2.3.3 GB on Droid X2. (Rooted) FPSe 0.10.54. This was great to have when PSX4Droid worked, seems it will no longer be updated. Basically I could sync up my DX2 with my wii, plug in the classic controller, then map the buttons accordingly in the emulator. But with FPSe it only allows specific controllers it seems.
Anywho, the only options I have for "Bluetooth Pad Port 1/2" are: Zeemote, IcontrolPad and BGP100. There is no option for Wii. I am also using WiimoteController App, everything is setup properly, I just cant use wii on FPSe. I even went into FPSe.ini and changed all the mapping for the wii manually. It's like they wont talk to each other. Input device is wii also (Where is asks Swype, Keyboard, Wiimote etc etc)
Hopefully you can help! Thx!
Hoppy
Hoppy96pgtbs said:
I have been searching for a while as to how I can use my wii remote with classic controller hooked up to it for FPSe. It works for PSX4Droid, until I updated to 2.3.3 GB on Droid X2. (Rooted) FPSe 0.10.54. This was great to have when PSX4Droid worked, seems it will no longer be updated. Basically I could sync up my DX2 with my wii, plug in the classic controller, then map the buttons accordingly in the emulator. But with FPSe it only allows specific controllers it seems.
Anywho, the only options I have for "Bluetooth Pad Port 1/2" are: Zeemote, IcontrolPad and BGP100. There is no option for Wii. I am also using WiimoteController App, everything is setup properly, I just cant use wii on FPSe. I even went into FPSe.ini and changed all the mapping for the wii manually. It's like they wont talk to each other. Input device is wii also (Where is asks Swype, Keyboard, Wiimote etc etc)
Hopefully you can help! Thx!
Hoppy
Click to expand...
Click to collapse
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Not sure if it matters to you now, but there is a way to use the ps3 controller
slowz3r said:
Not sure if it matters to you now, but there is a way to use the ps3 controller
Click to expand...
Click to collapse
O RLY? Please explain.
L2_n19h7m4r3 said:
O RLY? Please explain.
Click to expand...
Click to collapse
Nm, found this...
https://market.android.com/details?...xelstudios.sixaxiscompatibilitychecker&rdot=1
Says Droid X2 should be supported. Next step...
https://market.android.com/details?...sixaxiscontroller&feature=more_from_developer
L2_n19h7m4r3 said:
Nm, found this...
https://market.android.com/details?...xelstudios.sixaxiscompatibilitychecker&rdot=1
Says Droid X2 should be supported. Next step...
https://market.android.com/details?...sixaxiscontroller&feature=more_from_developer
Click to expand...
Click to collapse
glad i could help, lemme know how it works out for you
L2_n19h7m4r3 said:
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Click to expand...
Click to collapse
This is the one that I use, or am trying to use: https://market.android.com/details?id=com.ccpcreations.android.WiiUseAndroid&feature=related_apps
I was under the assumption that they were the same, but I'll give it a shot. What do you select under inputs and such (Bluetooth Pad Port 1, Pad Type) to get it to work? A small detailed how to would be outstanding. Been pulling my hair out over this one. Thanks for you help!
EDIT: I open FPSe, start the game (FF Tactics), enter settings then input. My only options for "Bluetooth Pad port 1" are BGP100, Zeemote and iControlPad. I have tried each of those, basically every combo of everything I think. WiiController is also active as my input. When I go into Hardware keys to assign the keys, its as if the wii controller isnt there. So I manually mapped the Wii buttons in the FPSe.ini file. Still nothing.
Going to give https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result a shot in a few. Thx!
L2_n19h7m4r3 said:
Botta bing.
https://market.android.com/details?id=com.mercury.inputmethod.wpad&feature=search_result
I use this and it works.
Click to expand...
Click to collapse
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Hoppy96pgtbs said:
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Click to expand...
Click to collapse
This sounds like an issue with whatever FPSE is, you should send an email to the guy that makes it if you actually want helpful advice. I may be wrong but seems no one here is an expert on that app
Sent from my DROID X2 using XDA App
Hoppy96pgtbs said:
Ok, I purchased this app, installed it, swiched input to this app (instead of keyboard), connected the Wiimote by pressing 1 & 2 for sync mode, verified controller was working.
Then I loaded up FPSE, still doesnt not recognize the Wiimote in the settings. I'm not sure if I am doing something wrong in the whole deal. Is FPSE supposed to connect to the Wiimote automatically? Am I supposed to configure the settings under Input in settings? In settings I have these options: Pad Type (Analog, Digital, Guncon)..... Bluetooth Pad Port 1 (iControlPad, Zeemote, BGP100, Disabled) ..... Hardware keys, to manually map the buttons of the above controllers I suppose, since I cant get it to work.
Does anyone have a good working version of PSX4Droid they can send me? lol I'm tired of messing with this, but will do basically whatever it takes to make it work. Aside from purchasing some other controller, cant justify that to the wife.
Sorry for the noob questions and thanks for all the help!
EDIT: I'll try to get some screen shots soon, if needed.
Hoppy
Click to expand...
Click to collapse
1. Turn on bluetooth
2. Open up Wii Controller IME
3. Connect your classic controller to your wiimote
4. Connect wiimote by pressing 1 + 2 simultaneously (Wait for confirmation)
(Note: Make sure the Wii that the controller is connected to is NOT ON!)
5. Change input method to the Wii mote
6. Open FPse
7. Press the menu button on your phone
8. Select diamond looking button
9. Select "INPUT"
10. Scroll down the menu and select "Hardware Keys"
11. Go down the list and assign the key that you want FPse to correspond with the key on your classic controller.
12. Play.
L2_n19h7m4r3 said:
1. Turn on bluetooth
2. Open up Wii Controller IME
3. Connect your classic controller to your wiimote
4. Connect wiimote by pressing 1 + 2 simultaneously (Wait for confirmation)
(Note: Make sure the Wii that the controller is connected to is NOT ON!)
5. Change input method to the Wii mote
6. Open FPse
7. Press the menu button on your phone
8. Select diamond looking button
9. Select "INPUT"
10. Scroll down the menu and select "Hardware Keys"
11. Go down the list and assign the key that you want FPse to correspond with the key on your classic controller.
12. Play.
Click to expand...
Click to collapse
I must have a bad version of FPSE, followed this to the t to no avail. FPSE was given to me by a work friend to try out since psx4droid broke. Now the market thinks I paid for it. Could this be an issue? I have V 10.54 I think. Been reading forums @ FPSE as well, its 110 pages tho.
Sent from my DROID X2 using XDA App
Try uninstalling updates and uninstall the program.
Sent from the coolest voided warranty phone ever.
As it turns out, update 2.3.3 broke both of my emulators ability to talk to the Wii controllers. I read something about "Bluetooth stack 2.0" in another thread, not sure what it means, but it sounds like it happened to me possibly. Before the update (rooted) everything worked. After the update, the controllers still connect to Wiimote and Wii Controller, but once the game is loaded it's like the controllers are dead.
Anyone else have this issue after update? FPSE and PSX4Droid do not work now. Actually, FPSE works, wont talk to Wiimote. PSX4Droid flat out broke, will not load games. I tried uninstall/reinstall of everything several times. Same results.
kpa2727 said:
Cyanogen 7 Mod :: I run update-cm-7.1.0-RC0.1, why? because CM uses Bluetooth Stack 2.0 unlike stock sense or other roms, Gingerbread Natively does not even run this that I know of.
Click to expand...
Click to collapse
Part of the thread in XDA.
Any input? Thx
Hoppy
Anyone using FPSe with wiimote care to share their FPSE.ini file?
/data/data/com.emulator.fpse/files/fpse.ini
EDIT: The update to 2.3.3 had to have broken it. Everything worked great prior to that. Just checked on my old D1 and it all worked great. No need for the ini file now, I transfered the one created on my D1 and it was no good. Thanks for your help guys.
I just recently came across this great new app in Android Marketplace called BT Controller. This is a free app. It's fairly new but I've confirmed it works very well. This app allows you to turn any Android device, whether your phone or the Prime itself. You install this app on both devices. Then you run them both at the same time. Both devices will prompt you to cut on BT. If devices already been connected before then the rest is easy. If not, then follow the usual methods of connecting or the marketplace description for app has instructions to easily do it. After that you press Connect on either device. it'll prompt both screens and ask which one you want to be Host(emulator or whatever) and other one the controller. once you choose one for a device, the other will automatically choose the remaining option. So lets say for example you have prime as the Host and phone as controller. Your phone screen will change to a controller. The Prime will have a box up the top right with 2 checkbox options in them. One is to configure input method. this is to select the BT controller to even be an option to use. Then the next box, when you click it, will actually allow you to select BT Controller as the keyboard input method.
After that then you good to go. I found that the phone actually controls the homescreens also. allows you to scroll through the apps or homescreens. if you press start on phone it'll bring up all your apps. Haven't figured out how tl confirm choices yet in homescreens with controller. Anyways, go to the emulator you want to run. Snesoid for example. to to options in there. cut off the touch display controls. then go to map hardware or custom buttons. then just match up the phone controller inputs to the one on emulator by pressing corresponding input. After that start the game and you good to go. The marketplace description has list of known working emulators or games. There might be more but haven't been found out yet.
I've only tried this so far with Snesoid and it plays very well. no lag at all. Now the prime just looks like a high definition monitor and you using your phone as the controller. Its pretty cool how it connects like that. I will try out my other games that have support for external or wireless controller n see how this fares. I have a good feeling it will work. I'm hoping this might be a temporary solution to playing more Onlive Games that don't have touch controls for it yet. Since this is seen as a BT controller on the Prime. I could easily map the buttons to whatever. so wish me luck..lol
I just wanted to let those know that there's another option to having a wireless controller if your haven't bought a physical one yet. Being able to use your phone as the controller is cool and works very well with this app. Sorry for the wall of txt but wanted to cover the description of app and how to set it up. ENJOY here's the link below
https://market.android.com/details?id=droidbean.btcontroller
Ads in the notification bar... no thanks. I fully support a need for devs to get paid but those ads are no good in my opinion.
Dr.Jeckyl said:
Ads in the notification bar... no thanks. I fully support a need for devs to get paid but those ads are no good in my opinion.
Click to expand...
Click to collapse
I have the free version and haven't seen any ads yet..lol they also have an ad free version.
plus I just confirmed this works great with Snesoid, Genesoid, FPse, and Riptide GP THD. This also works as an external controller on Onlive, to an extent. Any game that uses regular direction pad will work. those that use analog stick only won't work. Like I couldn't move in Batman Markham Asylum because its only mapped to analog sticks. the buttons worked though. Then I tried the new Super Street Fighter 4 Arcade edition. That worked great with the controller. it uses directional pad. so without my phone as external BT controller, I wouldn't of been able to play it. Couldn't get it tl work with N64oid though. trying to map the buttons came up unknown on controller setup. Still more games tl test out but this is pretty cool though.
Good evening, ladies and gents of XDA! I'm new to the forums so please forgive me if I'm crossing some lines. I've attempted to look for a similar problem not only on XDA, but through Google as well, but have turned up with no luck. Without further adieu, this is the issue I'm having:
I've read that the Transformer Prime natively supports the Wireless XBox 360 controller. Unfortunately for me, this does not seem to be the case. The buttons do work as I can navigate through the menu with my joystick and the green ring around the menu button flashes (which I'm told is also supposed to happen unless I have the Joystick Center 5 app).
Despite my tablet being able to read my controller, the button mappings are all out of whack. I tried playing OnLive with it and none of the buttons aside for the joystick does what it's supposed to do. I've tried restarting my tablet, but this was met with no avail. I've even purchased the aforementioned Joystick app, but remapping the buttons was unsuccessful. Does anyone know why this "native support" isn't kicking in for me?
I had the same problem, Android supports the controller but most of the games seem not to. I had the official 360 wireless controller with the official wireless receiver, and could only use it for navigating homescreens, icon by icon. Couldn't even go to the next homescreen without first highlighting everything along the way
PS3 one works perfectly on the 2 games I have that I know about them using the controller: GTA3 and Shadowgun.
garbagedump481 said:
I had the same problem, Android supports the controller but most of the games seem not to. I had the official 360 wireless controller with the official wireless receiver, and could only use it for navigating homescreens, icon by icon. Couldn't even go to the next homescreen without first highlighting everything along the way
PS3 one works perfectly on the 2 games I have that I know about them using the controller: GTA3 and Shadowgun.
Click to expand...
Click to collapse
Hey please can you give me some information on how the wireless controller works?
I was thinkin about buying a wireless controller like logitech F710 or whichever works...but I don't know what else I need. Please can you give me details of what I need and how to Install it to the Asus Transformer Prime...thank you.
I just received my PhoneJoy gamepad and paired it up to my Transformer Prime. It pairs fine and I can control the android system with it. However when I fire up fpse, it asks me to select the controller, I select PhoneJoy but it just gives me an error, cannot connect to the device.
I have followed the instructions on the phonejoy website word for word, 2 or 3 times already and I just cant seem to figure out where I've gone wrong?
If anyone can shed some light, really appreciate it!
I'm in the same boat. Had mine for a while but could never get it to work right so I just use a ps3 controller. Works much better and with sixaxis app you can do on screen button placement anywhere on the screen. Sorry I know this reply didnt help much.
There's a new FPse version that should have fixed that.
Hello dear forum members, I have an issue playing Nova3 with a PS3 controller. I recently bought a dualshock3 controller, downloaded a touch profile for nova 3 (Which works perfectly btw) and I've ran across an issue I haven't found on google or any of the search functions. Sorry if it's out there, I just can't find it.
Whenever I use the sticks to move around and move the camera, and at the same time do something else, like reloading, shooting, or focusing , one of these 'Buttons' gets stuck. For example, the gun keeps firing, I can't stop it. Or the movement button gets stuck, or the camera just keeps spinning.
It only happens when pressing multiple buttons on the PS3 gamepad, and it can only be resolved by moving the analog sticks like you have a mental disability and smashing every button on the joystick.
It is very frustrating when you're in an online match and your movement keeps spinning or your ammo drains out simply because the buttons get stuck.
I would very much appreciate all the help I can get on this.
I have not played any other game with the controller yet, so I cannot confirm if it's game related or controller app related.
I am sure I have some kind of setting set wrong. This happens with multiple touch profiles by the way, and does not happen if you use the touchscreen.