ODIN PC wrong flash for Galaxy note, help needed - Android Q&A, Help & Troubleshooting

Silly me...I tried to flash the chainfire repack (ROM for Galaxy Note) using PC ODIN but...instead of selecting the file for 'PDA' I selected it for 'Phone' without realising until the FAIL message came up, now I can't flash the chainfire repack from 'PDA', my phone is still in download mode so please help me if I have done something wrong...which I know I have, thank you.
Btw...the repack is not working now using 'PDA' from PC Odin

SealsNavie said:
Silly me...I tried to flash the chainfire repack (ROM for Galaxy Note) using PC ODIN but...instead of selecting the file for 'PDA' I selected it for 'Phone' without realising until the FAIL message came up, now I can't flash the chainfire repack from 'PDA', my phone is still in download mode so please help me if I have done something wrong...which I know I have, thank you.
Btw...the repack is not working now using 'PDA' from PC Odin
Click to expand...
Click to collapse
You probably have thought of, and tried this but......
I have a galaxy nexus and found myself stuck in a very simalar situation.
I came accross a galaxy nexus toolkit by WugFresh, and i managed to get stock back on through the adb interface.
The toolkit automatically detected my phone and what version of the firmware it needed, downloaded it and flashed it on to my phone. It can also use the fastboot interface but adb is by far better in my personal opinion...
Maybe this could help you out, or maybe could even find a galaxy note version.
As your in a non working state atm, you have nothing to lose by at least giving it a go.
May not help, but i thought i would try and give some assistance.

Ictcreations said:
You probably have thought of, and tried this but......
I have a galaxy nexus and found myself stuck in a very simalar situation.
I came accross a galaxy nexus toolkit by WugFresh, and i managed to get stock back on through the adb interface.
The toolkit automatically detected my phone and what version of the firmware it needed, downloaded it and flashed it on to my phone. It can also use the fastboot interface but adb is by far better in my personal opinion...
Maybe this could help you out, or maybe could even find a galaxy note version.
As your in a non working state atm, you have nothing to lose by at least giving it a go.
May not help, but i thought i would try and give some assistance.
Click to expand...
Click to collapse
I forgot about this post, sorry. I also posted in the Galaxy Note general section where I replied, I thought I would risk it and reboot my phone and it rebooted as normal...phew!...and when I when back into download mode and tried flashing the ROM again...it worked! A little wierd but i'm happy I haven't done anything damanging to my phone, watch something happen tomorrow like my phone not turning on

glad you got it working again. there is nothing worse than banging your head against a brick wall with a broken phone!!
luckily these days, it is near impossible to brick a phone completely. thank heavens for small mercys!!

Related

[Q] Soft bricked my friends vibrant:(

I apologize in advanced.
A friend handed me her vibrant and asked me to flash it so she could have the wi-fi hot spot ability.
I rooted it, then foolishly put one of the ROM's and now the phone is soft bricked... meaning I can get into recovery mode with the volume keys and power, but that's it.
I've tried to install a different rom from the external sdcard through recovery and it failed. (That is the only way I can get access a new update.zip file on the phone)
Can someone tell me exactly what to do to get a froyo rom on this phone working? I'd really really appreciate it.
P.S. I am on a mac, so I'm really looking for a solution that requires installing something from the external sd card. Is that even possible?
jameskever said:
I apologize in advanced.
A friend handed me her vibrant and asked me to flash it so she could have the wi-fi hot spot ability.
I rooted it, then foolishly put one of the ROM's and now the phone is soft bricked... meaning I can get into recovery mode with the volume keys and power, but that's it.
I've tried to install a different rom from the external sdcard through recovery and it failed. (That is the only way I can get access a new update.zip file on the phone)
Can someone tell me exactly what to do to get a froyo rom on this phone working? I'd really really appreciate it.
P.S. I am on a mac, so I'm really looking for a solution that requires installing something from the external sd card. Is that even possible?
Click to expand...
Click to collapse
Well you can go back to stock with Odin and try again...but since you're on a Mac....i think the Odin alternate is called Heimdall or something
EDIT: Found it....http://forum.xda-developers.com/showthread.php?t=834195
I'm sure it works just like Odin.....get the files needed to go back to stock here
http://forum.xda-developers.com/showthread.php?t=848737
this is good loool when can we expect to see i bricked my moms friend friends moms her sons phone
I'm glad someone is getting a kick out of this. I just downloaded Heimdall. I need to reboot and see if this can fix the problem. More to come...
I have to download something called qt which is a gig. Sucking internet from my epic at work... not going to happen today.
Note to self: NO MORE FLASHING FOR FRIENDS.
jameskever said:
I have to download something called qt which is a gig. Sucking internet from my epic at work... not going to happen today.
Note to self: NO MORE FLASHING FOR FRIENDS.
Click to expand...
Click to collapse
Thats weird... I dont even think Odin is more then 1MB, find it hard to believe that the Mac's alternate is so big. If you can find any windows machine it would be very easy to direct you on how to get her phone back up and running.
QT, which seems to be an environment like Java, is nearly a gig, and is necessary to run Heimdall on my mac.
The instructions for Odin says...
1. Open Odin3_v1.0
2. Load .512 into the PIT placeholder
(In this case s1_odin_20100512)
3. Load *FILE.tar* into PDA placeholder
(In this case Eugene_2E_JK2_Froyo.tar.md5)
4. Make sure COM port has a number in it
This means your phone is connected, if your phone is not connected make sure you have the correct drivers)
5. Press Start!
Click to expand...
Click to collapse
Using the image I've attached of Heimdall, which PDA/Code should I load the .md5 file under?
Thank you Odin, thank you Samsung USB drivers (which I had to google to find) and thank you mom's PC. I got my friend's phone working, unfortunately all her contacts were on the phone and not synced to google, and I didn't back her up. Whoops. Why would T-mobile transfer numbers from a black berry to an Android phone and not have it sync with google?
Heimdall was a waste of time and memory. I'm sure the developers worked very hard on it, but it totally didn't work for my mac book pro complicating a tense situation.
Problem solved.

[URGENT] Odin Crashed Whilst Flashing.

Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?

[Q] I think I bricked my samsung galaxy s2 =-(

I really need some help here if anyone could take some tile to do so...
I just got the samsung galaxy s2 and I tried to flash the firmware on the phone and I believe I flashed the wrong one and now I have no services on my phone at all. I flashed a rom and have no connect 3g/4g/wifi. I am not able to connect the phone to odhin to reflash the firmware either. I can get into download (Odhin mode) and I can also get into recovery. Anyone have any thoughts on this?
i dont get it, you say you cant connect your phone to odin, but you can get into downlaod mode.
put your phone in download mode, then connect your phone to PC and then reflash the correct firmware for your phone with ODIN
Angellife said:
I really need some help here if anyone could take some tile to do so...
I just got the samsung galaxy s2 and I tried to flash the firmware on the phone and I believe I flashed the wrong one and now I have no services on my phone at all. I flashed a rom and have no connect 3g/4g/wifi. I am not able to connect the phone to odhin to reflash the firmware either. I can get into download (Odhin mode) and I can also get into recovery. Anyone have any thoughts on this?
Click to expand...
Click to collapse
Ok, your phone is not bricked.
If you have no data/wifi your phone maybe missed baseband
Type this on dialer: *#1234#
Look at is write PHONE. What do u see?
What's your phone model? Look under the battery place
marcelotorres said:
Ok, your phone is not bricked.
If you have no data/wifi your phone maybe missed baseband
Type this on dialer: *#1234#
Look at is write PHONE. What do u see?
What's your phone model? Look under the battery place
Click to expand...
Click to collapse
It won't allow me to do that nothing happens when I punch in the #1234#
Phone model is SPH-D710
mrvtec69 said:
i dont get it, you say you cant connect your phone to odin, but you can get into downlaod mode.
put your phone in download mode, then connect your phone to PC and then reflash the correct firmware for your phone with ODIN
Click to expand...
Click to collapse
It doesn't connect at all when I am in download (odin mode) like it won't show me with the yellow connection in odin tells me that I have a custom binary and that I have downloaded 1 binary. The only time I can connect with odin is when the phone is in the booted up but I can not do anything with it at all no connection. Also Clockwork is all messed up as well whenever I click on a task it goes blank and I just hit the power button again and it goes back to the main screen =-(
I have been reading up online and I guess what I need is a US version of sprints firmware but now I need to figure out how to install it once I get my hands on it
I found the firmware!!
D710USEG30 is the firmware for Sprint USA galaxy s2 I am going to attempt to use Heimdall Frontend to install it (crossing my fingers) hehe
Ok update, I guess I installed something on my laptop to keep me from being able to use odin. I did it on my desktop just fine and I am back up and running. I thank both of you for your time it was very helpful and much appreciated =-)
I hope you both have a very Merry Christmas =-D
Angellife said:
D710USEG30 is the firmware for Sprint USA galaxy s2 I am going to attempt to use Heimdall Frontend to install it (crossing my fingers) hehe
Ok update, I guess I installed something on my laptop to keep me from being able to use odin. I did it on my desktop just fine and I am back up and running. I thank both of you for your time it was very helpful and much appreciated =-)
I hope you both have a very Merry Christmas =-D
Click to expand...
Click to collapse
Happy that you fixed your phone.
Next time, take care.
Happy x-mas for you too.
Angellife said:
It won't allow me to do that nothing happens when I punch in the #1234#
Phone model is SPH-D710
Click to expand...
Click to collapse
phone model is SPH-D710 are you sure you got the correct model number? if i am not wrong, SPH-D710 is for SAMSUNG GALAXY S II EPIC 4G TOUCH. correct me if i am wrong.
And backup your EFS (IMEI), use the search for EFS, and for backuo you can use the HK-Tool its on the market.. its very important to backup it.

SAMSUNG SM-G530AZ (Cricket) ALL FIRMWARES

Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.

Re-Installing Android on a Samsung Tablet - Go easy on me!

Hi
this is my first post here, so please go easy on me. I am an electronics engineer by trade but pretty old school stuff, although I am familiar with flashing microprocessor based systems. I'm not a complete fool.
I have a problem recovering a Tab 4 SM-T230. It is stuck on the initial page showing "Samsung Tab 4".
Only way to power down is removing the back and disconnecting the battery.
From there I can enter recovery mode but Master Reset doesn't cure it.
So I have Odin 3 installed and have the correct BL, AP, CP and CSC files ready to upload.
In device manager it is showing the tablet is connected and the drivers are okay.
The problem is, there is nothing showing in the ID:COM tabs in ODIN.
I've re-installed the drivers, unplugged/plugged, still can't get it to connect.
Any Suggestions? Am I going about this completely the wrong way?
I know it would probably make sense to just buy another tablet, but this one fits a modified holder used in a specific application, so replacing the tablet suddenly creates an engineering issue as well!
Many thanks in advance
Kevin
Henson25 said:
Hi
this is my first post here, so please go easy on me. I am an electronics engineer by trade but pretty old school stuff, although I am familiar with flashing microprocessor based systems. I'm not a complete fool.
I have a problem recovering a Tab 4 SM-T230. It is stuck on the initial page showing "Samsung Tab 4".
Only way to power down is removing the back and disconnecting the battery.
From there I can enter recovery mode but Master Reset doesn't cure it.
So I have Odin 3 installed and have the correct BL, AP, CP and CSC files ready to upload.
In device manager it is showing the tablet is connected and the drivers are okay.
The problem is, there is nothing showing in the ID:COM tabs in ODIN.
I've re-installed the drivers, unplugged/plugged, still can't get it to connect.
Any Suggestions? Am I going about this completely the wrong way?
I know it would probably make sense to just buy another tablet, but this one fits a modified holder used in a specific application, so replacing the tablet suddenly creates an engineering issue as well!
Many thanks in advance
Kevin
Click to expand...
Click to collapse
Try a different PC.
What version of Odin are you using? You need to use a version that was released around the same time the tablet was new to the market. Your tablet is from 2014 so you need to use Odin 3.09 or Odin 3.10.
Sent from my SM-S767VL using Tapatalk

Categories

Resources