[Q] Can anyone help me with Getting UHKG7 Gingerbread firmware and kernel - Galaxy S II Q&A, Help & Troubleshooting

Hi guys i recently updated my Gs2 through kies to the Ics firmware but i really don't like it much and i wanted to flash back the Gingerbread 2.3.5 that was on the phone before but all links that i have found so far with the firmware and kernel seem to be down so can someone provide me with new links?. Thanks in advance.

gennocyde said:
Hi guys i recently updated my Gs2 through kies to the Ics firmware but i really don't like it much and i wanted to flash back the Gingerbread 2.3.5 that was on the phone before but all links that i have found so far with the firmware and kernel seem to be down so can someone provide me with new links?. Thanks in advance.
Click to expand...
Click to collapse
The link for SAM (Peru) in Intratech's official firmware thread is not multiload, and works.
Alternatively, you can probably find any firmware you want on samfirmware.com, or checkfus.

Does the type of firmware really matter? or will getting the Peru one make a difference in the phone, my phone uses the TTT version so i wanted to get that back, my apologies if i just asked a noobish question but this is my first time at this sort of thing. and also the Sam (peru) link isn't working either.

gennocyde said:
Does the type of firmware really matter? or will getting the Peru one make a difference in the phone, my phone uses the TTT version so i wanted to get that back, my apologies if i just asked a noobish question but this is my first time at this sort of thing.
Click to expand...
Click to collapse
I honestly don't know what difference there is. Probably just the CSCs, (Country Specific Codes) which may or may not matter for you. Will probably make it so Kies doesn't recognize your phone for update. If you don't use Kies, it probably won't matter. But if you want the TTT version specifically, then, again:
ctomgee said:
Alternatively, you can probably find any firmware you want on samfirmware.com, or checkfus.
Click to expand...
Click to collapse
EDIT: sorry, the link on Intratech's thread used to work. I guess it doesn't anymore. However, again, see above quote for alternatives.

Ok i found one on Samfirmware, will try it out, and thanks for the help so far.

Related

[Q] Galaxy S2 Stock ROM (Vodafone UK)

I have had a look and cannot seem to find a stock rom for Vodafone UK and was wondering if anyone knew where i could find one. May just be being blind but couldnt see one. Its version 2.3.3 i am after
http://forum.xda-developers.com/showthread.php?t=1113928
Where were you looking? Behind your cooker?
Darkside Agent said:
http://forum.xda-developers.com/showthread.php?t=1113928
Where were you looking? Behind your cooker?
Click to expand...
Click to collapse
Cheers to be honest i'm not very good with forums, really need to sort it out lol
Quick question, how do i tell which version i need to go back to?
All i did to my phone once i got it was root it usin odin and supeoneclick. Downloaded was described i believe as an insecure version of samsungs generic rom named XWKDD?
Need to un-root my phone and get it back into a state where they won't know i ever did anything to the software lol

Stock firmware problem

Before I continue I just want to say that I have looked around, used the search button, but haven't found anything that will solve my problem.
So I was fairly unpleased with the custom rom I had flashed on my Sgs2 and wanted to flash my stock firmware (2.3.3 XWKE2) and so I went into the official thread for firmwares.
At first I tried out a 2.3.4 stock firmware, but kies would'nt let me update so then I continued looking and found a stock firmware that matched the one my phone originally had (android version 2.3.3 XWKE7)
I checked the codes and downloaded the NEE one since I live in Sweden. Flashed it with no problems but then when I went on Kies to try and update again I got "Your unit doesn't support updates through Kies"
It then also said: I9100XWKE2/1910OXXKE2/I9100XXKDJ/I9100XWKE2 (KOR)
Why did it say KOR? I thought I had downloaded the Swedish/Nordic firmware?
Can someone help me flash the real original firmware for my phone so I can update through Kies?
And your posting this in the dev forum because...?
This sections is for people to post developments not questions, help topics etc. Thats whey we have a Q&A and General forums.
Take a couple of seconds to look at this forum/topics again and then ask yourself does my topic look remotely at home here
Well, KE2 clearly isn't KE7, so it's doubtful that you flashed your original firmware.
This is stock Nordic KE2, taken from this thread.
If all you want is stock firmware, install this then connect to Kies and it should update to the latest Nordic firmware. Then back it up!! I'm in Norway, can't remember what is the most recent version, been on custom ROMs for a long, long time... Lykke til.
What custom ROM did you try, and why didn't you like it?
B3311 said:
Well, KE2 clearly isn't KE7, so it's doubtful that you flashed your original firmware.
This is stock Nordic KE2, taken from this thread.
If all you want is stock firmware, install this then connect to Kies and it should update to the latest Nordic firmware. Then back it up!! I'm in Norway, can't remember what is the most recent version, been on custom ROMs for a long, long time... Lykke til.
What custom ROM did you try, and why didn't you like it?
Click to expand...
Click to collapse
But my phone originally had the KE2 on it when I bought it. Couldn't wait for the Swedish release for KE7 and began flashing custom firmwares.
That is the exact link that I downloaded, from that exact forum. That's why I find it weird that Kies doesn't recognize it.
The custom ROM I tried was a leaked version of 2.3.5 from Frankenstein. I was about to download and flash another ROM but every time I asked for someone's suggestion they would always say the taste differs from person to person. I then responded that I just want a high performance and quick ROM, and never got an answer so that is why I wanted to flash to an original Firmware from Kies.
You ask 10 people which rom they consider good and you will get 10 answers, some of the most popular being:
Hyperdroid (personal fav): great base, great kernel, OTA app for mods/updates
Villanrom: Older base, very stable, some limitation of available mods due to the older base
Checkrom: Never been my cup of tea but people seem to like it, it has the kitchen app for mods
That is the exact link that I downloaded, from that exact forum. That's why I find it weird that Kies doesn't recognize it.
Flashing firmware means somewhere you changed codes and KIES dies not recognize .
A removal of KIES plus all registry entries may solve the issue .
jje
GRiM-UK said:
And your posting this in the dev forum because...?
This sections is for people to post developments not questions, help topics etc. Thats whey we have a Q&A and General forums.
Take a couple of seconds to look at this forum/topics again and then ask yourself does my topic look remotely at home here
Click to expand...
Click to collapse
I had 2 different tabs opened at the same time, both XDA forums, accidentally opened a thread in the wrong one. Sorry, it was an honest mistake.
JJEgan said:
That is the exact link that I downloaded, from that exact forum. That's why I find it weird that Kies doesn't recognize it.
Flashing firmware means somewhere you changed codes and KIES dies not recognize .
A removal of KIES plus all registry entries may solve the issue .
jje
Click to expand...
Click to collapse
Do you mean uninstalling it completely and re-installing it?
I'll try that and see if it works.
You need to have a "stock" combo of stock firmware, aka a modem, "PDA" (kernel+rom) and csc that where shipped together, otherwise KIES wont recognise it.
I tried uninstalling and re-installing it but it didn't work. Still get the "Your unit doesn't support programupdating through Kies" message.
veyka said:
You need to have a "stock" combo of stock firmware, aka a modem, "PDA" (kernel+rom) and csc that where shipped together, otherwise KIES wont recognise it.
Click to expand...
Click to collapse
Where can I find all that?
When I look at this thread: http://forum.xda-developers.com/showthread.php?t=1075278
All I can see is the one I used and that's just a PDA file
You require your saved original rom or one that nearly matches it .
From the branded /providers roms post .
Carrier branded .
http://forum.xda-developers.com/showthread.php?t=1113928
Or search for the CHECKFus page .
jje
NiTi9 said:
Where can I find all that?
When I look at this thread: http://forum.xda-developers.com/showthread.php?t=1075278
All I can see is the one I used and that's just a PDA file
Click to expand...
Click to collapse
Was it a file with one big .tar in it? if so thats everything.
Why do you want to update with KIES? Just use odin to flash a KIES release, there all in that thread, and its counterpart with the carrier branded firmwares.
Note, kies wont be able to updates "frankenstein" releases which are mix/match.
veyka said:
Was it a file with one big .tar in it? if so thats everything.
Why do you want to update with KIES? Just use odin to flash a KIES release, there all in that thread, and its counterpart with the carrier branded firmwares.
Note, kies wont be able to updates "frankenstein" releases which are mix/match.
Click to expand...
Click to collapse
Yes it was a big .tar file!
I really don't know how to explain it. I love this phone, and want to get the most out of it (custom roms, overclock, root) but I'm not that good with all of these different concepts and there is always that fear of bricking the phone.
Also I go to college right now, and am a bit behind so I really don't have time to go through the xda forums on a daily/weekly basis, so I thought that when the new firmwares (mainly a official/perfected version of the ICS) updates are available I could just log on to Kies and update them while saving my self some time.
NiTi9 said:
Yes it was a big .tar file!
I really don't know how to explain it. I love this phone, and want to get the most out of it (custom roms, overclock, root) but I'm not that good with all of these different concepts and there is always that fear of bricking the phone.
Also I go to college right now, and am a bit behind so I really don't have time to go through the xda forums on a daily/weekly basis, so I thought that when the new firmwares (mainly a official/perfected version of the ICS) updates are available I could just log on to Kies and update them while saving my self some time.
Click to expand...
Click to collapse
KIES is pretty crap and does this all the time, I have never had an update though KIES so im out of ideas
The one big tar file should have been right though, unless you picked a mix/match one.
veyka said:
KIES is pretty crap and does this all the time, I have never had an update though KIES so im out of ideas
The one big tar file should have been right though, unless you picked a mix/match one.
Click to expand...
Click to collapse
Nope, did not pick a mix/matched one from what I know. I'm gonna try one of the firmwares from the previous link you sent me. If it doesn't work there then I'll just continue flashing through Odin.
Quick question though, it says:
XWKI8:
Firmware info: PDA:XWKI8| PHONE:NEKI2| CSC:HTSKI1
XWKI8 Stock Kernel:http://www.multiupload.com/4O6DVGUGSU
Password: [email protected]
What do I do with the stock kernel? Flash it? If so where? (for example csc?)

[Q] Getting hold of UK carrier firmware

I've been trying to get hold of my phone's most-recent-but-one carrier firmware (2.3.3 BOKG2 version for UK T-mobile). Intratech's thread for carrier-branded firmware lists it as:
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1
Unfortunately, all the upload sites this links to seem to have removed the files for this firmware. Does anyone have advice on how to download it? (Apologies for posting on Q&A forum, but I can't yet post to the forum that covers this topic)
Thanks!
Tephlon said:
I've been trying to get hold of my phone's most-recent-but-one carrier firmware (2.3.3 BOKG2 version for UK T-mobile). Intratech's thread for carrier-branded firmware lists it as:
Firmware info: PDA:BOKG2|PHONE:BOKG1|CSC:TMUKF1
Unfortunately, all the upload sites this links to seem to have removed the files for this firmware. Does anyone have advice on how to download it? (Apologies for posting on Q&A forum, but I can't yet post to the forum that covers this topic)
Thanks!
Click to expand...
Click to collapse
if it is that important ask intratech to reupload it for you(provided that he has time & rom with him).
OR
wait for some kind users to upload it for you and post it here.
bala_gamer said:
if it is that important ask intratech to reupload it for you(provided that he has time & rom with him).
OR
wait for some kind users to upload it for you and post it here.
Click to expand...
Click to collapse
Thanks bala_gamer.
Completely agree with you. I'd ask him directly but (for good reason) he asks not to be PM'ed with such requests and, being a very recent noob, I can't yet post to his thread on the subject. My hope is that your second suggestion will work and someone might be able to help.
If you want the most recent firmware available for SGS2 on T-Mobile UK, try Checkfus. That will allow you to download the most recent firmware available for your phone/carrier/country that would normally be available via Kies.
Do a search on here for it.
Thanks for the suggestion - useful to know about checkfus for the future. Alas, it only downloads the most recent firmware and I'm after one of the older ones that used to be posted via the "multiupload" links. Many of these no longer function, seemingly having become casualties of the fallout from the Megaupload action by the US authorities: I think they have been pulled by the upload sites' administrators.
There seems to be a great effort to make affected firmware available again, but it looks like there's a large archive to re-upload. As far as I know, that was the only way to get hold of original carrier firmware that one can flash through Odin.
I've asked in Intra's thread for a DL link for this firmware. I'll post said link in this thread for you if he comes up with one.
Failing this go into a CPW service center or Sammy service center with a flash drive etc and ask the to load one on there for you.
Or use google.
Here is the file
"Such file does not exist or it has been removed for infringement of copyrights"
Trust us, we've been there and done that
fred_up said:
Or use google.
Here is the file
Click to expand...
Click to collapse
The most recent firmare for T-Mobile on Infratechs thread is BOKK1
PDA:BOKK1|PHONE:BOKJ1|CSC:TMUKK1
Its 2.3.6 and available on SamMobile.com to download as they use filesonic.
EDIT:If you dont want to sign up then see if this link works.Its from my account
http://www.hotfile.com/dl/137447572/90602f9/I9100BOKK1_I9100TMUKK1_TMU.zip.html
Password: samfirmware.com
Thanks very much to all of you - hopefully MistahBungle's post works.
cooza - thanks for your suggestion, but it's actually the BOKK1 firmware that I'm trying to roll back. There are a number of improvements over the previous version, but the camera wasn't one of them (much lower exposure levels than before), plus bluetooth peripherals seem to auto disconnect. So, back to 2.3.3 if I can until ICS arrives!
Keep an eye on the last page on Intra's thread in case he posts it when I'm not around (time diff & all).
Tephlon said:
Thanks very much to all of you - hopefully MistahBungle's post works.
cooza - thanks for your suggestion, but it's actually the BOKK1 firmware that I'm trying to roll back. There are a number of improvements over the previous version, but the camera wasn't one of them (much lower exposure levels than before), plus bluetooth peripherals seem to auto disconnect. So, back to 2.3.3 if I can until ICS arrives!
Click to expand...
Click to collapse
Tephlon said:
Thanks very much to all of you - hopefully MistahBungle's post works.
cooza - thanks for your suggestion, but it's actually the BOKK1 firmware that I'm trying to roll back. There are a number of improvements over the previous version, but the camera wasn't one of them (much lower exposure levels than before), plus bluetooth peripherals seem to auto disconnect. So, back to 2.3.3 if I can until ICS arrives!
Click to expand...
Click to collapse
O.k mate.If it doesnt work you could try this one.Its BOKE3,a bit older but its also 2.3.3 from May last year so at least you will have a 2.3.3 version.Same password: samfirmware.com
http://hotfile.com/dl/119473814/0d7f43d/I9100BOKE3_TMUKE3_BOKD1.rar.html
Tephlon said:
Thanks very much to all of you - hopefully MistahBungle's post works.
cooza - thanks for your suggestion, but it's actually the BOKK1 firmware that I'm trying to roll back. There are a number of improvements over the previous version, but the camera wasn't one of them (much lower exposure levels than before), plus bluetooth peripherals seem to auto disconnect. So, back to 2.3.3 if I can until ICS arrives!
Click to expand...
Click to collapse
Here:http://www.fileserve.com/file/TGxw6Nn/GT-I9100_TMU_I9100BOKK1_I9100TMUKK1_I9100BOKJ1.7z
Intra said - "Unfortunately I don't keep backups of the firmwares and since it's a defunct firmware version it's no longer on Samsung's server. Why don't they want to use a newer firmware? It's not like it will void their warranty or anything."
So looks like you're out of luck.
Tephlon said:
Thanks very much to all of you - hopefully MistahBungle's post works.
cooza - thanks for your suggestion, but it's actually the BOKK1 firmware that I'm trying to roll back. There are a number of improvements over the previous version, but the camera wasn't one of them (much lower exposure levels than before), plus bluetooth peripherals seem to auto disconnect. So, back to 2.3.3 if I can until ICS arrives!
Click to expand...
Click to collapse
Mistahbungle I hate to come here and do this but I'm also new to this. I want to root and use the latest firmware and I've been reading a lot. I've seen what you've done here and that is pretty cool. Anyways I have installed the latest firmware via kies for my country "Colombia" listed as "Columbia" in Intratechs thread. Not to many updates as you may see.
Firmware info: PDA:UHKH1| PHONE:UHKG4| CSC:COBKH1
I want to have this back up before i start doing crazy things to the phone jeje, just in case you know.
Can you please ask him if he can upload again?
If not, what can i do? should i go blind and update via odin any stock firmware? I was looking at XILA2...
thanks in advance
Um, no. He's said he doesn't have backups of old firmwares so that's pretty much the end of it. When you get 10 posts up, obviously you're more than welcome to head on over to his thread & ask him yourself.
borolo222 said:
Mistahbungle I hate to come here and do this but I'm also new to this. I want to root and use the latest firmware and I've been reading a lot. I've seen what you've done here and that is pretty cool. Anyways I have installed the latest firmware via kies for my country "Colombia" listed as "Columbia" in Intratechs thread. Not to many updates as you may see.
Firmware info: PDA:UHKH1| PHONE:UHKG4| CSC:COBKH1
I want to have this back up before i start doing crazy things to the phone jeje, just in case you know.
Can you please ask him if he can upload again?
If not, what can i do? should i go blind and update via odin any stock firmware? I was looking at XILA2...
thanks in advance
Click to expand...
Click to collapse
@Tephlon
Don't know if this will be off any help, but I've found the kernel only.
Kernel_I9100BOKG2.exe
Uploaded to mediafire.
If you don't need it, let me now.
http://www.mediafire.com/download.php?e66bbc8gztzuxnt
Thanks Mistahbungle & woebetide
I'll download woebetide's kernel asap. I can see why Intra's surprised at my wanting to use old firmware, but it's simply that the camera and Bluetooth works better on 2.3.3 than T-mobile UK's latest version. If anyone out there has compared the latest T-Mob UK firmware to the 2.4.4 UK unbranded XXKI1/XWKI4 and has views on camera exposure performance, it'd be interesting to hear them. I'm trying to roll back because everything seems under exposed on that 2.3.5 BOKK1. It's a fairly esoteric comparison, but you never know...
borolo222 said:
Mistahbungle I hate to come here and do this but I'm also new to this. I want to root and use the latest firmware and I've been reading a lot. I've seen what you've done here and that is pretty cool. Anyways I have installed the latest firmware via kies for my country "Colombia" listed as "Columbia" in Intratechs thread. Not to many updates as you may see.
Firmware info: PDA:UHKH1| PHONE:UHKG4| CSC:COBKH1
I want to have this back up before i start doing crazy things to the phone jeje, just in case you know.
Can you please ask him if he can upload again?
If not, what can i do? should i go blind and update via odin any stock firmware? I was looking at XILA2...
thanks in advance
Click to expand...
Click to collapse
If you want to back this up you can do a nandroid backup on you phone and keep this version on your internalSD.

[Q] Can't update to JB

Hello guys,
I bought this phone unlocked from a store in Cyprus (not from cytamobile vodafone as stated below). When I came to the UK, as I'm a student) (and inserted an O2 Sim-card) I got asked to update, which I did, but I haven't noticed anything difference and I'm still in 4.0.4. I've seen most of the people (in this forum at least) have upgraded but I still get that there is no update available for me.
So I've downloaded checkfus and the results are in the attachment... So i've searched in the checkfus website (it won't let me link it as my account hasn't got many posts) and I got some weird info and I'm trying to figure out what's going on without any luck.
As you can also see from the attachments here are the info and on the right the country results I get after searching in the checkfus website:
Product Code: GT-I9300MBDCYO (Cyprus (Cytamobile Vodafone))
PDA: I9300XXBLH1 (India, Kazakhstan (Kcell), Serbia (Vip SRB), Ukraine)
Phone: I9300XXLH1 (Kazakhstan (Kcell), Serbia (Vip SRB), Ukraine)
CSC: I9300OXFBLH1 (Serbia (Vip SRB))
So if you check the attachment you will see most of the information about my phone.
Also, please note that I've tried searching the above but haven't found anything useful. If I missed anything that has the answer I'm really sorry for creating a new thread.
Anyone knows what's going on? Is this normal? Should I flash another stock ROM (and which one)? Should I just wait?
Thank you very much for your time and I would really appreciate any helpful reply! If you need any other information please let me know as I really want a taste of the buttery update!
dude get the galaxy toolkit root and install any cooked rom they work great fluid and crispy get any famous one
muhammadshais said:
dude get the galaxy toolkit root and install any cooked rom they work great fluid and crispy get any famous one
Click to expand...
Click to collapse
Hello,
Thanks for your reply, but I don't want to start rooting and adding custom ROMs yet, as the stock one (until now) works for me!
My guess is that jb updates haven't rolled out in cyprus yet. As you bought your phone is cyprus, it won't follow the uk schedule.
If you don't mind flashing, just get any official i9300 firmware from sammobile and flash.
As you mentioned you don't want to amend your phone, or the sort, you can just wait for the cyprus jb to roll out?
Sent from my GT-I9300 using xda premium
xcly said:
My guess is that jb updates haven't rolled out in cyprus yet. As you bought your phone is cyprus, it won't follow the uk schedule.
If you don't mind flashing, just get any official i9300 firmware from sammobile and flash.
As you mentioned you don't want to amend your phone, or the sort, you can just wait for the cyprus jb to roll out?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thank you for your reply!
Well, I don't want to mess around with the phone this early as it's only about 2 months old.
I wouldn't mind waiting but as it's kind of weird that I haven't got it yet! Do you know if it would make any difference if I flashed the UK one?
If I get the UK Universal one (is that the BTU?) and flash it through odin as a PDA will that work? Will that make the flash triangle appear?
Sorry for asking so many questions I'm kind of a newbie and a bit of scared of the flashing process and don't wanna lose the warranty!
cleanthis26 said:
Thank you for your reply!
Well, I don't want to mess around with the phone this early as it's only about 2 months old.
I wouldn't mind waiting but as it's kind of weird that I haven't got it yet! Do you know if it would make any difference if I flashed the UK one?
If I get the UK Universal one (is that the BTU?) and flash it through odin as a PDA will that work? Will that make the flash triangle appear?
Sorry for asking so many questions I'm kind of a newbie and a bit of scared of the flashing process and don't wanna lose the warranty!
Click to expand...
Click to collapse
In that case leave it alone and wait for the update or contact the phone supplier or try a Samsung forum .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
JJEgan said:
In that case leave it alone and wait for the update or contact the phone supplier or try a Samsung forum .
BASICS
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
Oh I hoped there was another solution or someone that knew what was going on...
Still, thank you and I'll have a look at the link you provided

[Q] A Quick Easy Question? [SOLVED]

Need a quick answer. Long story short: I rooted my Phone with CF-Root>Want to Un-root>Found a firmware (XXEMA2)>Downloaded it but, I am not sure that it's the right version for my GT-19300?>I typed *#1234# *To check my firmware*>It displays:
Version:
AP: 19300XXEMA2
CP: 19300XXELLA *Or was it this?*
CSC: 19300JVEMA1
So...Did i downloaded its official firmware or it was the (XEELLA) firmware i should have downloaded? Sorry for the english, English is not my first language. I just wanted to make sure, That i have downloaded the right version for my "Samsung Galaxy S3 (GT-I9300)" and would it be safe to flash it with this firmware, I downloaded? Thank you for taking your time for answering my question. It will be much appreciated.
Re: [Q] A Quick Easy Question?
Dark Apparition said:
Need a quick answer. Long story short: I rooted my Phone with CF-Root>Want to Un-root>Found a firmware (XXEMA2)>Downloaded it but, I am not sure that it's the right version for my GT-19300?>I typed *#1234# *To check my firmware*>It displays:
Version:
AP: 19300XXEMA2
CP: 19300XXELLA *Or was it this?*
CSC: 19300JVEMA1
So...Did i downloaded its official firmware or it was the (XEELLA) firmware i should have downloaded? Sorry for the english, English is not my first language. I just wanted to make sure, That i have downloaded the right version for my "Samsung Galaxy S3 (GT-I9300)" and would it be safe to flash it with this firmware, I downloaded? Thank you for taking your time for answering my question. It will be much appreciated.
Click to expand...
Click to collapse
Flashing is never 100% safe. You can find the most up to datefirmware for your carrier and region on sammobile.com.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
Flashing is never 100% safe. You can find the most up to datefirmware for your carrier and region on sammobile.com.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the response, But that's not what i really asked for.
Re: [Q] A Quick Easy Question?
Dark Apparition said:
Thanks for the response, But that's not what i really asked for.
Click to expand...
Click to collapse
MA2 is your firmwares number. You can usually flash every firmware a long as it is for the I9300.
Sent from my GT-I9300 using xda app-developers app
chrismast said:
MA2 is your firmwares number. You can usually flash every firmware a long as it is for the I9300.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
But "Region" matters, right? I download this firmware because i couldn't find (XXELLA) Firmware [Region: Pak]. So i did some research but, I only found this firmware which was from my Region. So would it be safe to flash this firmware or should i find the (XXELLA) Firmware for my S3 (GT-I9300)? *Which i can't seem to find*. Thanks for quick response.
Re: [Q] A Quick Easy Question?
Dark Apparition said:
But "Region" matters, right? I download this firmware because i couldn't find (XXELLA) Firmware [Region: Pak]. So i did some research but, I only found this firmware which was from my Region. So would it be safe to flash this firmware or should i find the (XXELLA) Firmware for my S3 (GT-I9300)? *Which i can't seem to find*. Thanks for quick response.
Click to expand...
Click to collapse
Region doesn't matter, only if you want ota updates you need a matching region and csc if I am not wrong. But anyway you can flash any new version via Odin as well, hence I wouldn't bother with it.
Sent from my GT-I9300 using xda app-developers app
Dark Apparition said:
But "Region" matters, right? I download this firmware because i couldn't find (XXELLA) Firmware [Region: Pak]. So i did some research but, I only found this firmware which was from my Region. So would it be safe to flash this firmware or should i find the (XXELLA) Firmware for my S3 (GT-I9300)? *Which i can't seem to find*. Thanks for quick response.
Click to expand...
Click to collapse
If u want to untroot your phone and return to stock then u should find the rom for your region , press *#1234# and if supersu opens just press the back button once then u should see your phone info , write everything that u see thee AP CSC CP and tell us were did u buy your phone .
chrismast said:
Region doesn't matter, only if you want ota updates you need a matching region and csc if I am not wrong. But anyway you can flash any new version via Odin as well, hence I wouldn't bother with it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Yes, I want OTA update's. Still doesn't answer my question. Thanks anyways.
Question has still not been solved, Please post an answer if you are sure about it. Thank you.
Fygaroo said:
If u want to untroot your phone and return to stock then u should find the rom for your region , press *#1234# and if supersu opens just press the back button once then u should see your phone info , write everything that u see thee AP CSC CP and tell us were did u buy your phone .
Click to expand...
Click to collapse
You really didn't bother to look at the topic once? All the information that is needed is up there, My friend.
Dark Apparition said:
You really didn't bother to look at the topic once? All the information that is needed is up there, My friend.
Click to expand...
Click to collapse
I saw it m8 i just thought you made some mistake when u wrote your info , and i need to know were did he bought the phone so i could search the sammobile for your firmware or is there some other way to search trough sammobile without knowing the country code ?
Fygaroo said:
I saw it m8 i just thought he made some mistake and i need to know were did he bought the phone so i could search the sammobile for his firmware or is there some other way to search trough sam?
Click to expand...
Click to collapse
As i listed up there "[PAK]" that means [Pakistan] "Region". I am not sure what firmware is needed? The one i downloaded or the other one that i can't seem to find. Please don't tell me to go to "Sammobile.com" because i can't acces it i don't know why...Vola, now i can acces "Sammobile.com" *Wierd, it wasnt opening a few hours ago but now it did* So anyways, Its not about Downloading the firmware i just want the QUESTION TO BE PROPERLY ANSWERED Which is *That did i downloaded the Right Firmware Or should I download the Other Firmware?* The question is so simple why you people can't seem to understand it? Are you guys even staying at topic? The question is not about "What firmware i need to download", The question is "What firmware is to be used to RE-return to my Stock Firmware, I had". I will wait for 'Senior member' to reply, Anyways thank you guys.
Dark Apparition said:
As i listed up there "[PAK]" that means [Pakistan] "Region". I am not sure what firmware is needed? The one i downloaded or the other one that i can't seem to find. Please don't tell me to go to "Sammobile.com" because i can't acces it i don't know why...Vola, now i can acces "Sammobile.com" *Wierd, it wasnt opening a few hours ago but now it did* So anyways, Its not about Downloading the firmware i just want the QUESTION TO BE PROPERLY ANSWERED Which is *That did i downloaded the Right Firmware Or should I download the Other Firmware?* The question is so simple why you people can't seem to understand it? Are you guys even staying at topic? The question is not about "What firmware i need to download", The question is "What firmware is to be used to RE-return to my Stock Firmware, I had". I will wait for 'Senior member' to reply, Anyways thank you guys.
Click to expand...
Click to collapse
First of all. For someone who is looking for help your tone is offensive and discouraging to those that might be able to help. If the question is indeed so simple as you ask then why are you asking the question in the first place.
Second of all, the reason people ask you to look at sammobile is because you can select the region that you are in and/or bought the handset from and would be able to check for yourself if you have indeed downloaded the correct firmware for Pakistan.
Sammobile is down at the minute and will be back up at any minute. They Tweeted this 20minutes ago.
Drew071
drew071 said:
First of all. For someone who is looking for help your tone is offensive and discouraging to those that might be able to help. If the question is indeed so simple as you ask then why are you asking the question in the first place.
Second of all, the reason people ask you to look at sammobile is because you can select the region that you are in and/or bought the handset from and would be able to check for yourself if you have indeed downloaded the correct firmware for Pakistan.
Sammobile is down at the minute and will be back up at any minute. They Tweeted this 20minutes ago.
Drew071
Click to expand...
Click to collapse
I am trying to be clear with you guys, The guys who replied, Really did not get the point i was trying to make, but i tried to make my point as clear to understand in each post but still they weren't clear about a simple question? i just want to save there time and mine. And for you, My friend are you somekind of defender or what, If they didn't argued on anything so why you and about my tone, so you think i am the bad one here, If i was i wouldn't have said "Thank's" in every post and rage all over, Wouldn't i?. "I really appreciate your answer's/opinion's and taking your time to answer my question, I am really gratefull to all of you guys who replied, Sorry for wasting your precious time" *This goes to all* But, Still i haven't recieved any response anywhere near my question.
Dark Apparition said:
I am trying to be clear with you guys, The guys who replied, Really did not get the point i was trying to make, but i tried to make my point as clear to understand in each post but still they weren't clear about a simple question? i just want to save there time and mine. And for you, My friend are you somekind of defender or what, If they didn't argued on anything so why you and about my tone, so you think i am the bad one here, If i was i wouldn't have said "Thank's" in every post and rage all over, Wouldn't i?. "I really appreciate your answer's/opinion's and taking your time to answer my question, I am really gratefull to all of you guys who replied, Sorry for wasting your precious time" *This goes to all* But, Still i haven't recieved any response anywhere near my question.
Click to expand...
Click to collapse
I apologise if i have misunderstood what you have wrote but it is just how what you have wrote comes across.
Anyway, was your phone branded or unbranded when you bought it?
I have just had a think aswell. If you want to revert to complete stock unrooted, you could do it using kies firmware/update utility under tools. If you type the model as GT-I9300 and enter your device serial number (under battery, not imei) and connect your phone in download mode, kies will flash the correct firmware that that device shipped with.
I would help with the correct version but sammobile is still down and that is the site to help pinpoint the correct version details which you are asking for.
Drew071
drew071 said:
I apologise if i have misunderstood what you have wrote but it is just how what you have wrote comes across.
Anyway, was your phone branded or unbranded when you bought it?
I have just had a think aswell. If you want to revert to complete stock unrooted, you could do it using kies firmware/update utility under tools. If you type the model as GT-I9300 and enter your device serial number (under battery, not imei) and connect your phone in download mode, kies will flash the correct firmware that that device shipped with.
I would help with the correct version but sammobile is still down and that is the site to help pinpoint the correct version details which you are asking for.
Drew071
Click to expand...
Click to collapse
No need to apologize, I was bit harsh there for which i apolgize to you all. To the topic: I would try Samsung Kies, but the software crashes my (Window's) which unfortunately, I had to uninstall it. Well, i can wait untill the 'Sammobile' website is up again. Sorry for my english, If you are not clear with anything, Please ask freely.
Dark Apparition said:
No need to apologize, I was bit harsh there for which i apolgize to you all. To the topic: I would try Samsung Kies, but the software crashes my (Window's) which unfortunately, I had to uninstall it. Well, i can wait untill the 'Sammobile' website is up again. Sorry for my english, If you are not clear with anything, Please ask freely.
Click to expand...
Click to collapse
if you are having kies issues, try uninstalling, restart you computer, and then reinstall by right clicking and selecting "run as administrator" it usaully does the trick for me.
drew071
drew071 said:
if you are having kies issues, try uninstalling, restart you computer, and then reinstall by right clicking and selecting "run as administrator" it usaully does the trick for me.
drew071
Click to expand...
Click to collapse
There is no other way around? I have issues with my PC too, I dont have spare "Windows CD" So i am afraid if something happens, I will lose all my data. I know about Backup and stuff, But it will probably take alot more time.
Dark Apparition said:
There is no other way around? I have issues with my PC too, I dont have spare "Windows CD" I am afraid if something happens, I will lose my data. I know about Backup and stuff, But it will probably take alot more time.
Click to expand...
Click to collapse
Here is the firmware information for a stock unbranded Pakistan GT-I9300. This is what would have been shipped on the device when it was manufactured.
Product Code: GT-I9300MBDPAK
Version: Android 4.0.4
HIDSWVER: I9300XXALE9/I9300OJVALE9/I9300XXLE8/I9300XXALE9
I can not find the latest update for your region atm. But this firmware would be the right one for your region.
It is ICS though. you could install this and then OTA update your device.
Drew071
---------- Post added at 08:35 PM ---------- Previous post was at 08:15 PM ----------
I've found this also. It contains details of Pakistan 4.1.1 firmware.
http://www.geekyandroid.com/2012/10...s-download-stock-roms-jelly-bean-ics.html?m=1
Drew071
Sent from my GT-I9300 using xda app-developers app
drew071 said:
Here is the firmware information for a stock unbranded Pakistan GT-I9300. This is what would have been shipped on the device when it was manufactured.
Product Code: GT-I9300MBDPAK
Version: Android 4.0.4
HIDSWVER: I9300XXALE9/I9300OJVALE9/I9300XXLE8/I9300XXALE9
I can not find the latest update for your region atm. But this firmware would be the right one for your region.
It is ICS though. you could install this and then OTA update your device.
Drew071
Click to expand...
Click to collapse
Ah, I really appreciate you came up with something. So, should i search and download this firmware *Which i don't know, where to download!* and are you sure this is the "Stock Firmware for my region?" And about the one i download, What about that? Thanks mate and Sorry for alot of question, Just want to make sure i download the right firmware so i am out of these trouble's.
Re: [Q] A Quick Easy Question?
Dark Apparition said:
Ah, I really appreciate you came up with something. So, should i search and download this firmware *Which i don't know, where to download!* and are you sure this is the "Stock Firmware for my region?" And about the one i download, What about that? Thanks mate and Sorry for alot of question, Just want to make sure i download the right firmware so i am out of these trouble's.
Click to expand...
Click to collapse
In the link I've posted if you search you wok find a link to Pakistan firmware. If your device is a Pakistan unbranded Rom then that file will restore a complete stock system.
Before you flash, turn off your phone and hold volume dwn, home and power. Then press the up arrow once in download mode. Look at the Flash count abs make sure it's 0 or reads stock or official next to the status. If it doesn't reboot your phone and use triangle away which is in the forum and remove the Flash count. Then Flash your rom via odin.
Drew071
Sent from my GT-I9300 using xda app-developers app

Categories

Resources