Hi,
I just tried to install Neutrino 2.5p2.
the installation went well... but then I added gapps(the new version, not the old one). next boot the phone just went to hell.
bootloops in the motorola screen.
yea, I know you've seen this post alot lately, but I've tried to reinstall it like a 100 times... and Im sure Im doin' it right. (with the new version of gapps and all)
Help?
Use older version of GAPPS and just update all the apps to the latest you can afterwards.
CaelanT said:
Use older version of GAPPS and just update all the apps to the latest you can afterwards.
Click to expand...
Click to collapse
two questions:
1. where do I get the old gapps from?
2. if I flash the old gapps, it whouldnt bootloop?
Related
Hey guys,
I (was) on jokers CM9 (before recent update). I backed up and then attempted to install the new version... So here's the problem, I can't install Gapps PERIOD. It failed for jokers CM9, as well as MIUI v4. I'm not new to installing ROMs, I know I did all the wipes properly etc and fixed permissions just in case. I have tried the last 3 releases of Gapps as well. The ROM is good, boots fine and all (MIUI and CM9) but no Gapps in any situation. The only time I've been able to get it to stick is using the Options Chooser MIUI Installer, worked great. Ive downloaded the files mutiple times with no problems... no idea what I could be missing! Anyone else had this problem/fix?
did you update your CWM recovery to 6.0.x.x? That's what i did before flashing jokers CM10 alpha build and it wouldn't let me install GAPPS either. I just reverted back to an earlier version and it worked fine.
R2DeeTard said:
did you update your CWM recovery to 6.0.x.x? That's what i did before flashing jokers CM10 alpha build and it wouldn't let me install GAPPS either. I just reverted back to an earlier version and it worked fine.
Click to expand...
Click to collapse
Yes! I actually did right before I started flashing the new stuff... thanks!
Still having trouble ... downgraded back to 5.x. (joker v3). Now it seems like data/cache arent wiping. When trying to flash clean, after doing all wipes I still end up with the same install.
fabe0334 said:
Still having trouble ... downgraded back to 5.x. (joker v3). Now it seems like data/cache arent wiping. When trying to flash clean, after doing all wipes I still end up with the same install.
Click to expand...
Click to collapse
I use photon3 recovery. Works great. Be sure to flash twice if gapps don't show up. If still nothing then you must have a bad download of gapps.
If this works let me know.
Sent from my SGH-I777 using XDA
I have just flashed my phone and been trying to get GAPPS installed. No matter what version I try to flash it does not appear in the system.
Seems to be no issue during the flash through TW, and no errors come up. But when I go into apps area of the phone I only see "Play Magazine" added.
Anyone have an idea?
Doug
Try...
daowen said:
I have just flashed my phone and been trying to get GAPPS installed. No matter what version I try to flash it does not appear in the system.
Seems to be no issue during the flash through TW, and no errors come up. But when I go into apps area of the phone I only see "Play Magazine" added.
Anyone have an idea?
Doug
Click to expand...
Click to collapse
I had the same problem thing that i did was reset my phone to regular Gingerbread 2.3.6 and redid the process first installing the firmware than the GAPPS. The other posibility is you have a corrupted GAPPS files and or files...
*The first method only works with zip files.
DISCLAIMER: I AM IN NO WAY RESPONSIBLE FOR ANY PROBLEMS ON YOUR DEVICES CAUSED BY FLASHING THESE BUILDS. THE UPSTREAM CODE AND BUILDING IS MAINTAINED BY THE CYANOGENMOD TEAM, NOT ME. I AM NOT ASSOCIATED WITH THEIR TEAM, I AM JUST THE THREAD OWNER.
What is CyanogenMod ? It is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
CyanogenMod 13.0 : Download
Changelog : Changelog
Open GApps : Download ( arm, 6.0, nano )
TWRP : Download​
CM13 Nightlies, ROM for the Sprint Galaxy S5
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Nightly, now moved to 14.1
UPDATE 6/14: Looks like there's an issue that 5ghz network doesn't work on higher bands, but it works on 36-48 and bluetooth. Hopefully it will be fixed soon.
UPDATE 6/23: There's a fix attempt on boot image. Link. Thanks to @haggertk
UPDATE 6/27: Looks like Bluetooth and Wifi issue have been fixed since 6/25 nightly.
Thanks to @haggertk
Created 2016-05-12
Last Updated 2016-11-29
Reserved
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
alexclang said:
I just needed confirmation on something. I'm currently running CM12.1 on a SM-G900P with firmware G900PVPU3BOK4. Does the update to CM 13.0 require a firmware update to G900PVPU3CPCA (the MM level of firmware from the stock Sprint download) or can I stay on G900PVPU3BOK4 with CM13.0?
btw: Sorry for the double post. I'm new to XDA and having trouble figuring out which forum is correct for me to ask my questions in.
Thanks!
Click to expand...
Click to collapse
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
e-j said:
From my limited experience, it does not appear to run on CPCA. CM13 on OK4 worked for me.
Click to expand...
Click to collapse
Excellent!! I'll just install the latest nightly for CM13 just like I was going for 12.1 and hopefully things will go smoothly!
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
UPDATE/PSA: USE THE NANO GAPPS AS STATED IN THE OP. NANOGAPPS INFINITY OPENS THE DOOR.
e-j said:
I'm having difficulty with CM13 and Open GApps. If I flash CM13 alone everything is fine. When I install CM13 and then the ARM 6.0 pico Open GApps through the same TWRP 3.0.2-1 session (as directed here: https://github.com/opengapps/opengapps/wiki/Notes-for-Android-6.0), I either get constant force close errors after boot (with 5/19 CM & GApps zips) or an endless blue android boot screen (with 5/20 CM & GApps zips). I've tried re-downloading the zips and reinstalling after wiping (dalvik, system, data, cache) multiple times.
Any ideas?
Click to expand...
Click to collapse
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
alexclang said:
I've had similar issues; all with Google apps. When I see it, I delete the Google app in question and then immediately re-install from the App store. Once I've done that, I haven't had the Google app force quit again.
Click to expand...
Click to collapse
Got it working after I realized the OP specifically mentioned the "nano" GApps variant; booted fine after a clean install of CM13 & the nano zip.
Issues w. CM13 flash
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
smspenc said:
Ok... slightly frustrated here.
Basic issue: Have flashed CM13 (Nightly 5.17.16) along with the latest Gapps. Upon reboot my phone will go to the Cyanagenmod splash screen, appear to load for several seconds, and then restart. It keeps doing this for at least 10 minutes until I turn it off. I have re-flashed a couple times after reloading the backup but no change.
Process I used: First of all my phone already has Android 6.0.1 firmware installed (not sure if that's an issue). I have TWRP setup as recovery and rooted with su 2.52 (and yes I verified the root prior to flashing). To flash I boot into recovery (obviously), factory reset, install cm13, clear dalvik, and repeat process with gapps. I've done this before with older CM's successfully but for some reason I can't get past the CM splash screen.
Any assistance is appreciated. If I have made a completely stupid error in my process or this exact issue is covered in another thread don't hesitate to point that out!!
Thank you in advance.
Click to expand...
Click to collapse
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
lentm said:
You had the official MM installed from Samsung, correct?
As far as I know, the current CM13 needs LP bootloader installed.
I have no issue with LP bootloader.
Click to expand...
Click to collapse
Yeah that was exactly the issue. Reflashed 5.0 then made the jump and it worked perfectly. So much wasted time...
---------- Post added at 05:28 AM ---------- Previous post was at 05:25 AM ----------
e-j said:
Would boot loop on the latest firmware for me as well; had to Odin back to OK4.
Click to expand...
Click to collapse
Yeah reflashing lollipop then installing cm13 did the trick.
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
has anyone got themes to work ine keeps crashing
manolze said:
has anyone got themes to work ine keeps crashing
Click to expand...
Click to collapse
Mine works fine with Puzzled UI - CM Theme from Play Store on 5/20 build.
I have no working theme chooser on this releaese
xenokc said:
Works great!
Is there a version of SuperSU that works with CM13? All trash the ROM and have to do full restore.
Click to expand...
Click to collapse
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
xpm69420 said:
no need just go into developer and turn on root access
---------- Post added at 03:28 PM ---------- Previous post was at 03:24 PM ----------
anyone have a solution to theme chooser yet? i have already fixed phone dial problem and time out of sync problem
Click to expand...
Click to collapse
Theme chooser works great for me, not having any issues with it. I am having an issue with the time being or of sync when set to automatic... How'd you fix it? Also, what's wrong with the dialer... can't say I'm having any issues there either.
unclejuju said:
Does this Rom fix Bluetooth issues?
Sent from my SM-G900P using XDA-Developers mobile app
Click to expand...
Click to collapse
I little late here, but CM 13.0 did NOT fix the S5 bluetooth issues. Still have the skipping and studdering.
Im having some trouble with my OPX. I was running CM13 nightly of sept 20th. Today i wanted to update my OPX to the latest nightly, and make a fresh start, so i took some backups of apps, downloaded the latest nightly (not OTA), went into TWRP, did a full wipe, and flashed the 10/15 nightly and opengapps pico package.... Thats when the fun began.
All my phone shows is the Oneplus X logo. (without powered by android). I am able to turn it off, and reboot into recovery, and flash another zip, but so far ive tried flashing 6 different CM13 nightlies, and all give the same result.
I was a pokemon player with root and xposed, so my guess was that systemless xposed, magisk and superSU were causing trouble. So ive tried running all the uninstaller packages, to no avail.
i CAN run a nandroid restore from 1 week ago. i can boot to that nightly version. it works.... but as soon as i try to update it again, or even wipe all data, it doesnt want to boot anymore. i thought that as long as i had TWRP things should be easy to fix, but im running out of ideas. Uninstalling xposed, magisk and superSU in this backup, and rebooting, still works, but the same problem arises after updating.
Im pretty sure the answer is simple as hell, but i must be overlooking something. any sugestions?
I just found out you need a new bootloader... should have looked harder before starting this thread (was searching for over an hour, but in the wrong places). I'll try the guide in the CM thread.
same exact thing happened to me, wasn't aware you needed new bootloader, think you could share the link?
rx15901 said:
same exact thing happened to me, wasn't aware you needed new bootloader, think you could share the link?
Click to expand...
Click to collapse
Here.you should always keep an eye on general section,thats where all the guides are,also should read the thread before flashing a rom.
Hi,
I was running a cm 13 ROM on my Galaxy S 3 i9300. With Google Play. But after installing several ROMs it's gone. I have the same ROM but when I now install it it comes without Gapps. How come? Is there a way to switch them off/on somewhere so they won't get installed?
How to get it back? I have tried to intsall Google Play separately but none seam to work. Google services just keeps crashing.
tokintmash said:
Hi,
I was running a cm 13 ROM on my Galaxy S 3 i9300. With Google Play. But after installing several ROMs it's gone. I have the same ROM but when I now install it it comes without Gapps. How come? Is there a way to switch them off/on somewhere so they won't get installed?
How to get it back? I have tried to intsall Google Play separately but none seam to work. Google services just keeps crashing.
Click to expand...
Click to collapse
If it comes without GApps, you can try flashing them... http://opengapps.org/
To check your type of processor, you can try using Droid Info(this one is better I think) or CPU-Z. Since you don't have Play Store, probably APK mirror is a choice.
If this is not what you want, please explain yourself better.
( I am assuming you have a custom recovery to flash OpenGapps, since you tried several ROMs)
I have Clocworkmod recovery (if this answers the question). Since I rooted the phone, I have only tried like 3-4 different CM ROMs. Only one of them came without Google. Others came with Google. But few days ago when I flashed the same ROMs several times I suddenly didn't get Google anymore. How come if it's the same ROM file?
Thanks for the links, I'll check the out later. Gotta run ATM.
tokintmash said:
I have Clocworkmod recovery (if this answers the question). Since I rooted the phone, I have only tried like 3-4 different CM ROMs. Only one of them came without Google. Others came with Google. But few days ago when I flashed the same ROMs several times I suddenly didn't get Google anymore. How come if it's the same ROM file?
Thanks for the links, I'll check the out later. Gotta run ATM.
Click to expand...
Click to collapse
That seems very strange, since its the same file. Did you tried downloading and reflashing the zip again? Something weird could have happened, resulting in a corrupted file.
By the way, I just noticed that CWM 6.0.4.7 and 6.0.4.5 have some problems with the OpenGapps, according to their FAQ(section 5)
DarkAlpha.Sete said:
That seems very strange, since its the same file. Did you tried downloading and reflashing the zip again? Something weird could have happened, resulting in a corrupted file.
By the way, I just noticed that CWM 6.0.4.7 and 6.0.4.5 have some problems with the OpenGapps, according to their FAQ(section 5)
Click to expand...
Click to collapse
Opengapps was what I needed! And it worked. Thanks!
But yeah, I was certainly flashing same ROM files. First few times I got Google and at some point not anymore. I did not download new zip files in the meantime. I don't even remember where I did I get one of them. I have noticed a similar thing some time ago that flashing the same ROM gave me a little different outcome. I don't remember exactly, but I think it was something like although I wiped cache and user data, I still had all my settings in place after flashing.
tokintmash said:
Opengapps was what I needed! And it worked. Thanks!
But yeah, I was certainly flashing same ROM files. First few times I got Google and at some point not anymore. I did not download new zip files in the meantime. I don't even remember where I did I get one of them. I have noticed a similar thing some time ago that flashing the same ROM gave me a little different outcome. I don't remember exactly, but I think it was something like although I wiped cache and user data, I still had all my settings in place after flashing.
Click to expand...
Click to collapse
I'm glad that I helped you!
Also, don't forget to tap that little "Thanks" button