I haven't been able to come up with a way to set my screen to full brightness while charging, and haven't found a solution with a search. I want it up as bright as it will go when the phone is in my car mount and plugged in, and I normally keep the brightness below 50% to save battery. It's a pain to switch the display setting each time I get in and out of the truck. I have Tasker, but I haven't been able to come with a way to do what I want with it yet, unless I'm missing something. Ideally, I'd have it automatically go to 100% with no timeout or dim when I plugged the phone in. Any suggestions?
I suggest getting a new phone.
Sent from my SGH-I777 using xda premium
33t said:
I suggest getting a new phone.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Thanks, that's lots of help. But to be honest, if I was looking to get pointers from a prick, I'd still own an iPhone.
SmittyRN said:
I haven't been able to come up with a way to set my screen to full brightness while charging, and haven't found a solution with a search. I want it up as bright as it will go when the phone is in my car mount and plugged in, and I normally keep the brightness below 50% to save battery. It's a pain to switch the display setting each time I get in and out of the truck. I have Tasker, but I haven't been able to come with a way to do what I want with it yet, unless I'm missing something. Ideally, I'd have it automatically go to 100% with no timeout or dim when I plugged the phone in. Any suggestions?
Click to expand...
Click to collapse
Just swipe the notification bar at the top of the screen left and right to change the brightness, no need to go to display settings.
I am on Fenny's ics rom and in developer settings it has stay awake while charging but it was in Tasks rom also I just can't remember where.
Edit...I just searched play store market for screen control and seen a paid app called screebl it has settings for brightness in portrait and landscape (slider controls) and also a box to tick to disable while docked. I am thinking you could set it up with those options.
jsmith8858 said:
Just swipe the notification bar at the top of the screen left and right to change the brightness, no need to go to display settings.
Click to expand...
Click to collapse
You see, now THAT is a useful bit of advice; I didn't know about using that gesture. Thanks for that, I know I'll get a lot of use out of that info now, no more trying to navigate to settings when I walk out into the sun. However, I would like to find a way for the screen to go to full brightness when I plug it in.
adfurgerson said:
I am on Fenny's ics rom and in developer settings it has stay awake while charging but it was in Tasks rom also I just can't remember where.
Click to expand...
Click to collapse
I'm on Tasks ROM; the stay awake setting I can do, but if I'm not mistaken it will still dim the screen after a bit, won't it?
Yea just hold you're finger on the furthest right of the notification bar after you plug it in. only takes a second.
Sent from my HTC EVO View using Tapatalk.
SmittyRN said:
I haven't been able to come up with a way to set my screen to full brightness while charging, and haven't found a solution with a search. I want it up as bright as it will go when the phone is in my car mount and plugged in, and I normally keep the brightness below 50% to save battery. It's a pain to switch the display setting each time I get in and out of the truck. I have Tasker, but I haven't been able to come with a way to do what I want with it yet, unless I'm missing something. Ideally, I'd have it automatically go to 100% with no timeout or dim when I plugged the phone in. Any suggestions?
Click to expand...
Click to collapse
Tasker will do what you want.
T
Sent from my SGH-I777 using XDA
https://play.google.com/store/apps/...lt#?t=W251bGwsMSwxLDEsImNvbS5qZXN0ZXIzMTQxIl0.
Had to link to web based play store....screebl was a bum steer. But this is what your looking for.
Edit...Using my phone to post here, copied and pasted url from browser for link but it gives the option to go to the mobile play store when I click the link in my own post...still learning new stuff.
To the point downloaded app works like a charm .
adfurgerson said:
https://play.google.com/store/apps/...lt#?t=W251bGwsMSwxLDEsImNvbS5qZXN0ZXIzMTQxIl0.
Had to link to web based play store....screebl was a bum steer. But this is what your looking for.
Edit...Using my phone to post here, copied and pasted url from browser for link but it gives the option to go to the mobile play store when I click the link in my own post...still learning new stuff.
To the point downloaded app works like a charm .
Click to expand...
Click to collapse
EXCELLENT!!! Exactly what I was looking for. Thank you, sir, I owe you a beer.
Your welcome. Will be using it myself. Having fun figuring out how to post links.
Feeling less like a bystander. Now if I learned how to type I could keep up.
adfurgerson said:
https://play.google.com/store/apps/...lt#?t=W251bGwsMSwxLDEsImNvbS5qZXN0ZXIzMTQxIl0.
Had to link to web based play store....screebl was a bum steer. But this is what your looking for.
Edit...Using my phone to post here, copied and pasted url from browser for link but it gives the option to go to the mobile play store when I click the link in my own post...still learning new stuff.
To the point downloaded app works like a charm .
Click to expand...
Click to collapse
Nice find thanks for sharing.
That app works perfectly. Thanks OP for starting this thread. I have always manually adjusted, so it's nice to skip the steps....and thanks to adfurgerson for the link!!
And fyi, I don't know if it's my phone, but no matter how I swipe the notification bar to adjust brightness, it never goes to 100% brightness. I always check in settings afterwards, and it's at about 95%. Maybe I've been doing it wrong, but with the above mentioned app, I no longer need to wonder.
Sent from my coffee pot.
SmittyRN said:
Thanks, that's lots of help. But to be honest, if I was looking to get pointers from a prick, I'd still own an iPhone.
Click to expand...
Click to collapse
Sorry that asshole. Like that guy exist in this community
Sent from my SAMSUNG-SGH-I777 using xda premium
Just know that even if you're running the charging app mentioned above, if you're using the phone while charging, and its getting hot, the phone will dim the screen as needed, for protection.
Sent from my coffee pot.
TheSkinnyDrummer said:
Just know that even if you're running the charging app mentioned above, if you're using the phone while charging, and its getting hot, the phone will dim the screen as needed, for protection.
Sent from my coffee pot.
Click to expand...
Click to collapse
That would explain it dimming in stay awake mode as Smitty mentioned.
adfurgerson said:
That would explain it dimming in stay awake mode as Smitty mentioned.
Click to expand...
Click to collapse
Even as I'm posting in this thread, my screen is dimming/brightening every 10 seconds or so. Is this phone just not cut out for full bright while charging?
Sent from my coffee pot.
Virus1x said:
Sorry that asshole. Like that guy exist in this community
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
No problem, I can call a troll out when I see one. I've always thought there should be a troll limit on xda... like 3 confirmed troll posts, and you are banned for a month.
TheSkinnyDrummer said:
Even as I'm posting in this thread, my screen is dimming/brightening every 10 seconds or so. Is this phone just not cut out for full bright while charging?
Sent from my coffee pot.
Click to expand...
Click to collapse
Is your auto-brightness turned on?
I'd be a lot happier with auto-brightness if I had more control over it, like if I could set the baseline for it to adjust from, and maybe change the adjustment frequency.
SmittyRN said:
Is your auto-brightness turned on?
I'd be a lot happier with auto-brightness if I had more control over it, like if I could set the baseline for it to adjust from, and maybe change the adjustment frequency.
Click to expand...
Click to collapse
I never use auto...what I'm referring to is the phone's overheating protection. My phone is charging right now and it feels warm around the edge and just under the back camera lens. I'm sitting pretty close to a warm fireplace. I'm sure if I were outside (45F) the screen wouldn't be dimming.
Sent from my coffee pot.
Related
I was wondering if someone could create (or if there already is) an app that will dim the screen a lot more than just setting it to 0. I work late hours and come home, just wanting to unwind and play some solitaire. I'm blinded by the screen. I know that there are night/clock apps that can do this. Thanks!
I second this request. The screen is quite blinding in a dark room. A night mode would be nice too have.
Sent from my SGH-T959 using XDA App
I would pay for this app, blows my mind how they could make a phone that can't dim lower. Even when setting brightness to 10 with Dimmer it's a real pain using this phone in the dark.
Sent from my SGH-T959 using XDA App
shznit said:
I would pay for this app, blows my mind how they could make a phone that can't dim lower. Even when setting brightness to 10 with Dimmer it's a real pain using this phone in the dark.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I would also throw down some of my hard earned dollars for something like this, i want to preserve my battery and the dimmest setting isnt making me feel happy about things
Why not just slide your finger across the task bar from right to left and it would lower the brightness to the lowest setting. To brighten go the other way.
Way easier than another app.
kizer said:
Why not just slide your finger across the task bar from right to left and it would lower the brightness to the lowest setting. To brighten go the other way.
Way easier than another app.
Click to expand...
Click to collapse
Thanks, but not what I was talking about. I'm talking about lowering the brightness past that for nighttime usage. I know it's possible; I have a bedside app that lowers it way past the default.
BTW, that trick only works with Auto Brightness off.
yeah this would be nice. also, having those cool filters like on CM6 would be nice too. the red filter is great for checking your phone in a dark movie theater.
OK been using adj brightness in the market and it was brilliant in brightness control. Unfortunately it doesn't work on the galaxy s2 and because my eyes play up, am finding the phone to bright for me especially when using it at night when lights are off, what alternatives are their to lower the brightness level please.?
For Amoled screens of any type "Screen Filter" seems to be the best.
I agree. Screen Filter seems to be excellent and can make the screen as dark as you ever want. (to a level that no LCD can ever go to imo)
Thanks guys it worked it is the best av seen so far.
I got mine sgs2 on Saturday and hadn't really thougth I would need an App to control this, the settings ont he power widget were good enough for me. However, I tried this out for a laugh and it works well. Will definitely use it at night time.
Although at the moment I am just enjoying the super brightness
Birghtness control from the notification bar
Can one still adjust the brightness by swiping the finger along the notification bar, like one did on the i9000?
Can one disable the automatic brightness from somewhere in the settings menu on the i9100 in the same way as the i9000?
Yep, same thing works in the SGSII.
NZtechfreak said:
Yep, same thing works in the SGSII.
Click to expand...
Click to collapse
Perfect. Great. Thanks.
Never mind.
forgetmyname said:
Can one still adjust the brightness by swiping the finger along the notification bar, like one did on the i9000?
Can one disable the automatic brightness from somewhere in the settings menu on the i9100 in the same way as the i9000?
Click to expand...
Click to collapse
Swype for brightness. How I just tried dropped down and not
Sent from my GT-I9100
crypticc said:
Swype for brightness. How I just tried dropped down and not
Sent from my GT-I9100
Click to expand...
Click to collapse
Your location is marked as London, so I think that you ought to be able to write a non-nonsensical sentence in English. No offence, but this is unintelligible!
crypticc said:
Swype for brightness. How ? I just tried dropped down and not dropped down and no change
Sent from my GT-I9100
Click to expand...
Click to collapse
Sent from my GT-I9100
crypticc said:
Swype for brightness. How I just tried dropped down and not
Click to expand...
Click to collapse
Hi Crypticc,
You misunderstood what I wrote.
1) I referred to a partially completed sentence:
" How I just tried dropped down and not" - not what?
2) You have confused the verb 'to swipe' with an application called Swype.
As I noted, you wrote your location was from London, yet that you are not a native anglophone; No problem, but I was a little confused in the beginning.
To summarize: Your reply confused me. You partially clarified what you wrote, and now I understand. Thank-you.
* Back on topic
In order to change the brightness by swiping along the notification bar, please ensure that you have turned off the automatic brightness adjustment setting in the menu. I do not recall the exact name. Then, it should work.
I think that this can be found in : Settings -> Display -> Brightness
Best regards.
forgetmyname said:
Your location is marked as London, so I think that you ought to be able to write a non-nonsensical sentence in English. No offence, but this is unintelligible!
Click to expand...
Click to collapse
Lol awesome... You funny definately are.... Maybe hes Yoda?
jangomango said:
Lol awesome... You funny definately are.... Maybe hes Yoda?
Click to expand...
Click to collapse
I tried rather than did that's the problem
( swype just replaced swipe with swype - oh and it replaced a few other words too).
That said, thanks for the tips folks; both on previewing/reviewing posts, plus on how to swipe to change the brightness.
What would you all suggest be the optimal brightness setting to put the phone on?
sohanlon07 said:
What would you all suggest be the optimal brightness setting to put the phone on?
Click to expand...
Click to collapse
OFF completely?? Maximum battery life... FTW
Sent from my GT-I9100 using XDA App
how do I keep the TP from turning on while on the touchstone? I don't want a clock or pictures, I just want it dark in my room at night. I can turn off the power when I first set it on the dock but when its fully charged on pops the screen again. How can I disable this?
Thanks
install preware if you dont have it already, go to patches and look for charge only option. there's several to choose from. pick one you like and use.
I'm pretty sure if you hit the power button after exhibition mode starts it will turn the screen off for good. But what I did was install the minimum brightness patch so now when its in exhibition mode it is much darker and much less bothersome when trying to sleep. To install the patch you'll need preware installed.
Pvster said:
install preware if you dont have it already, go to patches and look for charge only option. there's several to choose from. pick one you like and use.
Click to expand...
Click to collapse
Do you happen to know the name? I found one called Quick System Tasks and it locked up my tab. I looked through all the prepare apps and only found that one.
bug splat said:
Do you happen to know the name? I found one called Quick System Tasks and it locked up my tab. I looked through all the prepare apps and only found that one.
Click to expand...
Click to collapse
Are you using the Preware app on your Touchpad?
Preware -> Available Packages -> Patch -> Search -> Enter "Charge"
The search is started by tapping the magnifying glass in the top button, which brings up the keyboard. Type in "charge" (without the quotes).
cchase231 said:
I'm pretty sure if you hit the power button after exhibition mode starts it will turn the screen off for good. But what I did was install the minimum brightness patch so now when its in exhibition mode it is much darker and much less bothersome when trying to sleep. To install the patch you'll need preware installed.
Click to expand...
Click to collapse
i bet its not as hot as people say if screen off/brightness down, right?
but it on the touchstone... hit the power button once it goes to exb, hit the power button again it goes black.. problem solved.
NissanNick said:
but it on the touchstone... hit the power button once it goes to exb, hit the power button again it goes black.. problem solved.
Click to expand...
Click to collapse
except as he mentioned...when it hits full charge the screen lights up again. Silly you
Bandage said:
except as he mentioned...when it hits full charge the screen lights up again. Silly you
Click to expand...
Click to collapse
Or when it receives any notifications for that matter. I've resorted to just keeping the cover on the HP case closed so it covers the screen when I leave it on the touchstone overnight.
Tilde88 said:
i bet its not as hot as people say if screen off/brightness down, right?
Click to expand...
Click to collapse
If you're talking about the temp of the device, I'm not really sure. I installed the minimum brightness patch the second day I got it because it was way too bright to have as a bedside clock. I also have a case on it, but it doesn't feel warm when I take it off the stone. Also, the lowest brightness with the patch can only be set in the screen and lock app. You cannot set it from the drop down on the home screen.
Sent from my Nexus S 4G using XDA App
Bandage said:
except as he mentioned...when it hits full charge the screen lights up again. Silly you
Click to expand...
Click to collapse
uhhh im sure he is asleep by the time it fully charges.
i have a solution
1) put the charger and the touchpad into a box
2) tape the box up
3) put my address on the box
4) take it to the post office and send it to me
that should fix your problem
dr_acula_sxe said:
uhhh im sure he is asleep by the time it fully charges.
i have a solution
1) put the charger and the touchpad into a box
2) tape the box up
3) put my address on the box
4) take it to the post office and send it to me
that should fix your problem
Click to expand...
Click to collapse
Great post! Hahaha
Sent from my GT-P7510 using xda premium
Guys, im the developer of Power Switch, an app that switches off your tablet's screen when you shut the case.
The main thread can be found here:
http://forum.xda-developers.com/showthread.php?t=1277712
Ive had reports of problems with the tab's light sensor, so would appreciate some debugging feedback.
You can use the lite version to test, it has all the features, but just wont save as much juice.
Thanks in advance. Feel free to reply here or in the main thread, i read both regularly!
Many thanks!, Looks very interesting, will try it out and see how it does with my Tab.
Let me know if the light sensor work properly please!
Got Pro version on my phone, works great.
Will try it on my tab soon.
I'll check it out when i get home.
Works great on my tab too. Thanks mate.
Edit: I noticed on my phone after testing it on and off a few times, the light sensor stopped working. But after rebooting, I havent seen the problem since.
And I've yet to see a problem on my tab.
So the light sensor works? Can you log some sensitivity settings for me so i can fine tune it...
ftgg99 said:
So the light sensor works? Can you log some sensitivity settings for me so i can fine tune it...
Click to expand...
Click to collapse
Like in different lighting settings? Like dimming the lights in the room? Or using different Sensitivity %s and closing the case?
Or all of the above?
Oh and after some extensive use on my DroidX, I've been having some problems. It turns off while I'm using the phone even in very lighted surroundings.
---------- Post added at 09:38 AM ---------- Previous post was at 09:20 AM ----------
I'm at work right now but I tried a few things.
I'm using a Belkin Folio case and i tested to see how low i could set the % for it to read when the case was closed.
Anything under 10% didn't work (even when i completely covered the light sensor with my finger)
On 100%, even a shadow over the sensor would trigger it.
I'll try a few different lighting instances when I get home.
Thats cool, thanks!
ftgg99 said:
Thats cool, thanks!
Click to expand...
Click to collapse
Sure thing, bud.
Still having issues with it on my DroidX. I've been trying different things but I dont think its user error.
You should be using the proximity sensor, not the light sensor for the phone!
ftgg99 said:
You should be using the proximity sensor, not the light sensor for the phone!
Click to expand...
Click to collapse
Oh well okay haha.
Its much more efficient...
Actually...to be honest, I dont even need it on my phone because its a habit of mine to hit the power button as im setting it down or putting it in my pocket.
I do love it on my tab though. Makes it easier just being able to close my case instead of trying to find the power button lol.
Can't remove this app from my tab! Help please
Sent from my GT-P7500 using xda premium
Disable admin permissions or click the uninstall button. Man, som people...
ftgg99 said:
Disable admin permissions or click the uninstall button. Man, som people...
Click to expand...
Click to collapse
Haha I know right...Don't see why he would want to uninstall it tho
The best ones are the Oles that leave market reviews claiming its "some kind of scam"...
Could you help me how to configure it n make it work? Mine seem not work. Duno how. Im using pro
Sent from my GT-P7500 using XDA Premium App
joseph168 said:
Could you help me how to configure it n make it work? Mine seem not work. Duno how. Im using pro
Sent from my GT-P7500 using XDA Premium App
Click to expand...
Click to collapse
Do you have "Enable Power Switch" Checked?
EDIT: If you're using a tablet with a case that covers the screen when you close it, here's what you need...
1. Check "Enable Power Switch"
2. Check "Admin Permissions" (this gives the app permission to lock your screen or turn the tablet off)
3. Check "Enable Sensors"
4. Check "Use Light Sensors" (I recommend 10-20% Sensitivity)
5. Set up your Confirmation and Activation Delay.
---Activation Delay is how long it takes for the device to read if the case is closed or not. (If you set it to 0 seconds, your screen will cut off even if you simply brush something up against the light sensor on accident) I keep mine at 3 seconds.
---Confirmation Delay starts after you Activation Delay ends. It is a confirmation dialogue box that asks what you want to do. Once the timer for it runs out, it will lock your screen/turn the screen off. (I keep mine at 3 seconds for this as well but you might want it longer)
To recap...Set Activation Delay for how long you want the device to wait before it makes a decision if it should turn off your screen or not. Set Confirmation Delay for how long you want it to wait after the Activation Delay ends to actually turn off the screen.
((If you don't have a case that covers the screen and you want it to turn off when you put your tab upside down, replace step 3 with *Check "Acceleration Sensor"* And make sure you Uncheck "Use Light Sensor"))
Hi all,
When I charge my HP TP running CM9 nightly, a clock screen is displayed automatically. I note that after my screen time out period of five minutes, the screen does power off, however when I wake up in the morning the screen is on displaying the clock screen - I guess email or some other notifications turn the screen back on.
Basically, can I change the behaviour so that when I put the TP onto the Touchstone, nothing special happens and this clock isn't displayed? I have an app that switches the screen off when the case is closed, and essentially this charging behaviour is interfering with this. I don't want the TP clock blazing away lighting the screen up all night.
Thanks,
Andy
Wow some refuse to do any work on their own....
If you want to shut the screen down all you have to do is hit the power button and the screen shuts down
As far as the Desk Clock app... You simply go into app manager and clear the defaults for it
Sent from my GT-I9100 using Tapatalk 2
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
cdzo72 said:
Wow some refuse to do any work on their own....
Click to expand...
Click to collapse
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Andysan said:
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Click to expand...
Click to collapse
Then you have something installed waking your TP that we have no way of troubleshooting without some type of log.... when you shut the screen down there is no reason for Android to turn it back on unless YOU have EXPLICITLY given an app YOU installed permission to do so. As far as the clock... when you set the TP on the Touchstone one of two things happens... a dialog box comes up with the apps that can by default be activated when placed on Touchstone OR YOU HAVE designated a default app to do this....
Now if YOU can't remember which app YOU ALLOWED to run then you have one of two choices.... go through all the apps in app manager clearing all defaults OR wipe all data and start from scratch and pay attention to what you press this time
Sent from my cm_tenderloin using Tapatalk 2
0
cdzo72 said:
Then you have something installed waking your TP that we have no way of troubleshooting without some type of log.... when you shut the screen down there is no reason for Android to turn it back on unless YOU have EXPLICITLY given an app YOU installed permission to do so. As far as the clock... when you set the TP on the Touchstone one of two things happens... a dialog box comes up with the apps that can by default be activated when placed on Touchstone OR YOU HAVE designated a default app to do this....
Now if YOU can't remember which app YOU ALLOWED to run then you have one of two choices.... go through all the apps in app manager clearing all defaults OR wipe all data and start from scratch and pay attention to what you press this time
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Thank you for your reply, but unfortunately you are wrong.
I only have the clock app installed that triggers when the device docks - no other apps respond to this event, therefore when I dock the device I don't get presented with the option/choice, it just displays the clock as there is no alternative. I've found the best solution to be to install 'Screen Off ' from the market. This has an option to act on the dock event, and now when I put the device on the dock I get given the choice as to whether to show the clock or to power off the screen. This works pretty much perfectly, and without the clock showing the screen stays off, instead of coming back on randomly after I shut it off - therefore, I don't think that the clock was coming back on before due to notifications from apps/emails, but be cause the clock app itself was triggering - possibly when the device reaches full charge or something and temporarily disconnects from the dock or something, I don't know. In summary, you need more than one app installed that is coded to respond to the dock event, otherwise when you dock the device android just defaults to the dock event and powers the screen back on periodically. I have never explicitly enabled this behaviour, and without installing another app it seemingly cannot be changed or disabled.
I thank you for taking the time to reply to my post, but I think you should learn something from this thread - just because a problem may seem to be user error doesn't necessarily mean that it is - your post is completely wrong which is fine as I appreciate that you are just trying to help, but by getting all aggressive over it you've just ended up looking a little stupid. The forums should be all about helping people, not ridiculing them - hopefully this post will serve to help anyone out with a similar predicament.
Cheers.
Ignore cdzo72 - he's one of the most sarcastic members of this forum. He seems to have a hate on for anyone who has an issue with anything, and can't solve it for themselves. You get used to him, and ignoring him.
I'm glad you found your solution.
Thanks for posting that man, beginning to think it was just me. Guess every forum has one - hopefully if anyone else comes across this thread it might solve their problem too.
Andysan said:
Thanks for posting that man, beginning to think it was just me. Guess every forum has one - hopefully if anyone else comes across this thread it might solve their problem too.
Click to expand...
Click to collapse
Yeah maybe they'll miraculously use the much talked about but seldom known to noobs SEARCH fumction
Sent from my cm_tenderloin using Tapatalk 2
cdzo72 said:
Yeah maybe they'll miraculously use the much talked about but seldom known to noobs SEARCH fumction
Sent from my cm_tenderloin using Tapatalk 2
Click to expand...
Click to collapse
Er...dude, if your implying i didnt use the search beore psting then please show me where the pre-existing thread with my issue and resolution clearly described is. If not, well I'm not gonna sit up and play forum wars with you all night, I've got work in the morning.
Saw this post and was excited as I was looking for this same thing. Too bad someone had to ruin this post. Is it just the touchpad forum? Don't seem to encounter this on the other xda forums.
Sent from my Galaxy Nexus using xda premium
Andysan said:
Thank you for your reply - unfortunately the option to clear defaults for the clock is greyed out.
I'm puzzled by your sarcasm - no, I can't figure this out by myself as I can't identify the configurable part of android that triggers this clock front end. I had Googled it but I can't find a suitable answer there either. Whilst I can shut the screen off with the power button, as per my original post when I wake up in the morning the screen has come back on.
Cheers!
Click to expand...
Click to collapse
The clock app doesn't trigger itself. Mine charges all night and never turns back on. That said, it is almost impossible to move the pad while it's on the TS without charge disconnecting and reconnecting. And that will trigger the clock app. So, if you have the TS on an unstable surface that allows ir to be inadvertently "jiggled", that could cause the clock to turn back on.
T-Keith said:
Saw this post and was excited as I was looking for this same thing. Too bad someone had to ruin this post. Is it just the touchpad forum? Don't seem to encounter this on the other xda forums.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Hey Man,
I don't know if it affects other devices to be honest. On my phone the clock app is configurable, but on my Cyanogenmod9 HP TP tablet it isn't something that you can change the behaviour of (if you tap the stock 'Clock' app it just locks the screen and displays a clock, you cant set any options like on my SGSII). I don't know if this is a feature of tablet OS'es in general, or just the CM iteration of Ice Cream Sandwich.
Either way, the 'Screen Off' app references working with a number of docks (blurb specifically references Sony ones) so I'd give it a shot and hopefully it will work for you.
I had that problem too, it was very annoying. I installed dock no op from the market and it finally stopped waking me up. That seems like the only option since cm9 doesn't let you set the dock behavior.