Hi got a galaxy tab 10.1 ive got the Kang CM9 ICS rom on it, worked fine for about a month then suddenly just started crashing
did a hard reset device powers on charges starts to load boot image then freezes and crashes.
im able to launch recovery mode, tried doing factory reset and it wouldnt go through.
tried cache whipe was able to complete and the boot logo lasted longer then froze and crashed again.
not sure what happened and im thinking the only thing left to try is a full reflash
has anyone else experianced this?
thanks in advance
alstylez said:
Hi got a galaxy tab 10.1 ive got the Kang CM9 ICS rom on it, worked fine for about a month then suddenly just started crashing
did a hard reset device powers on charges starts to load boot image then freezes and crashes.
im able to launch recovery mode, tried doing factory reset and it wouldnt go through.
tried cache whipe was able to complete and the boot logo lasted longer then froze and crashed again.
not sure what happened and im thinking the only thing left to try is a full reflash
has anyone else experianced this?
thanks in advance
Click to expand...
Click to collapse
I've not experienced this because I haven't messed much with Kang CM9 ICS, but my first suggestion would to be restore from nandroid backup. If you're like me, in the past, you didn't do one or can't access it. So a full reflash or possibly going back to stock and then a reflash would be my suggestion.
If you decide to go back to stock first, or still need to after a reflash, the overcome ROM thread is a good place to lead you to 7500 & 7510 stock ROMs. You'll find a link to a guide outside xda there where towards the bottom part of the guide it says Restocking yer system.
Sent from my GT-P7510 using XDA Premium HD app
thanks Benzoman was able to reflash the stock rom from rogers using ODIN after which it got stuck in a bootloop. then tried data wipe in recovery mode and it booted up like normal.
any idea what could have caused it?
Depends if you had HC 3.1 as a base firmware, more likely to crash, then another would be what version of ICS you used, because the kang is at milestone 4, the current stable march edition.
Related
Hey guys. I've been an Android & XDA user for a while now, so this question shouldn't be about a nooby-sitiuation.
My friend bought an AT&T Samsung Galaxy SII (SGH-i777) this week. I've been trying to flash CM7 ever since. I got the rooting done, the properly recovery (with no signature / "abort" problems)
The rom seems to keep bricking the phone. Its simply unflashable. I seen tons of people on XDA who got it to work, with barely any serious problems. I troubleshooted the problem myself, and its simply just the CM7 roms. I would do a full wipe, and then install the rom like I would on my other Android phones, and the installation is successful. When it boots, it gets stuck on the Galaxy SII boot screen (not the splash/boot animation screen) and it would stay on it with a yellow warning triangle on the bottom.
I tried flashing other roms, like Cognition X2, and they worked. Its just CM7 on this phone... which is odd because CM7 is usually stable (nightlies aside.) Especially since the 7.1 stable version was recently released. Anyone can help me get the rom up and going? Would be highly appreciated.
did you try to wipe dalvick cashe as well when you wiped data?
I just flashed it tonight myself and all I did was reboot into CWM and did a Wipe data/factory reset and then Wipe cache partition. After doing that, I simply flashed the cm7 zip file that was loaded on my internal sd. Rebooted and no problems.
I didn't have ANH ISSUES installing it but I know I read that some.people bad to flash it twice initially. So flash it, then when it goes back to the recovery screen flash it a second time. I also remember users on the international SGS2 bad to do the same thing. Most have no issues but I think they found that it depends on what you used to root your phone (on the SGS2 internationals) and I THINK some had to do the same here. Try it and if it works just hit the thanks button.
Sent from My KickAss CM7 Galaxy S2
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
How do you boot into recovery? I know On the SGH-i777 you have to hold the Vol down+back+power to get to the Download mode, but I tried everything to get to the recovery itself.
Boobie Watcher said:
did you try to wipe dalvick cashe as well when you wiped data?
Click to expand...
Click to collapse
Yes. I've flashed many roms before, this seems to be the only one I had ever seen a problem with.
mfpearson said:
if you flash it and get stuck in a bootloop, just pull the battery, and 3-finger back into recovery to flash the rom again.
keep doing this until you get it up and running - took me a few times, including a couple of battery pulls.
Click to expand...
Click to collapse
Word.
Edit: To boot into recovery vol up+vol down+power
Had the same problem. Read somewhere to install the ROM twice in a row in CWM without rebooting inbetween. Worked like a charm.
Thanks for the feedback guys. I'll try this in the morning once I get my hands on the phone again.
Saw this type of behaviour on occasion with cm7 on my aria. Sometimes caused by a bad download of the rom. Did you verify md5s ?
Sent from my SAMSUNG-SGH-I777 using Tapatalk
Don't forget to do a master data clear /reset before trying to boot the new CM7 rom for the first time - clear out the old stuff. Works perfectly here.
Sent from my SGH-I777 using xda premium
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
squigge said:
I'm having the same issue. I'm getting signature errors when trying to flashCM7.1 stable. I've downloaded it two times now with the same problem. My question is, I'm trying to flash from on the phone itself, storing the zip in the download dir on the phone as I don't have an sd card. Will this even work? I've tried looking around and all I can find is flashing from an sd card. I can get one, I just haven't yet.
Click to expand...
Click to collapse
That's the way I did it. Put the update in the same folder on the internal SD card. I can't even access my external SD card from CWM.
Sent from my SGH-I777 using xda premium
Hmm, I'm not sure what I'm doing wrong then. I did a factory reset, and wiped the cache and get the same thing. I know it wiped because now I have nothing setup on the phone when I boot normally. Suggestions?
Quit downloading the CM7 builds for the International Galaxy S II. They will NOT work. That is why it fails. Look for the Galaxys2ATT build.
Sent from my SGH-I777 using xda premium
I got the build by going to the cm7 website, looking by device, finding the galaxy s 2 and grabbing the stable one. So perhaps that is the incorrect one and I'll look closer for one that has att in it, whenever the site isn't going up and down. They seem to be having issues today.
Make sure you're installing the version located in this thread...
http://forum.xda-developers.com/showthread.php?t=1297568
Specifically this link
Double flash made it work. Thanks guys. + thanks for telling me how to boot into recovery lol. Great rom.
Sorry for the newb issues, it was the wrong version. I got the att version from the thread previously mentioned and that worked perfectly. Thanks!
Hi Guys
I flashed the leaked ICS but hate it. Can I flash to stock GB via Odin? What about the baseband versions etc.., would it matter?
Sorry, I read another thread but it's unclear and I want to avoid bricking. Thanks
As far as what I've read you can flash stock from Odin or even use CWM to a previous nandroid of gingerbread.
Sent from my SAMSUNG-SGH-I717 using XDA
If you got your Note from AT&T, simply flash this stock ODIN:
http://forum.xda-developers.com/showthread.php?t=1506330
I went from ICS back to Gb cause I missed the tethering and it was easy. Just make sure you clear the caches and all should be well.
Thanks.. I was worried of the different baseband would have any adverse effect, but it doesn't sound like it will. I'll give it a try.
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Mines fine..only baseband is different, phone works.
Before I Odin to stock, I booted into recovery, factory reset and wiped cache. Odin, then booted into recovery and performed another factory reset and wiped cache again.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
beall49 said:
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Click to expand...
Click to collapse
Try factory wipe/format usb from within GB..it may help.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
beall49 said:
I Odin'd back to stock and I'm in a world of ****. My phone cant do anything, it just gets stuck on every swipe and reboots about every 5 minutes. Does anyone have any ideas?
Click to expand...
Click to collapse
figured it out. My post is below.
lindenhurst said:
You get it figured out? I did the same thing. . My old apps still there. I can tell it is gingerbread, but nothing works now. I hope you got your figured out!!
When I boot into recovery I get the screen that tells me to use the up and down keys and when I choose factory wipe, and press power button, nothing happebs. If I hold it down eventually the phone shuts off. When i restart it, nothing changed.
Click to expand...
Click to collapse
I had to revert from ICS to GB yesterday and, even tho I am on Telus, I had success by flashing the pda-odin-att-stock.rar image
I can't post links .. I'm too new. But literally.. google what's bolded above and you will find the hotfile link.
It replaced everything (including the recovery) ... FULL system image. Solved everything and brought me back to 100% stock.
So yes, I lost my root and my CWM recovery software.. but it got my phone working again.. I can reflash CWM and re-root as I need.
After the install, wipe cache, factory reset etc.
I too flashed the stock ATT rom but like the previous poster, it gave me a phone which started up but wouldn't work. When I tried to get into recovery mode, it went to a screen with the recovery mode stuff at the top, but with a yellow warning sign in the middle and some words about manual mode, and it would not let me do a wipe or reset.
Here is what I just did that did work.
I flashed the recovery-i717-cwm-b4.tar file with odin. This worked and allowed me to get into the "proper" recovery mode to do a wipe and factory reset, as well as a cache wipe. I then reflashed tieh the stock ATT rom, and my phone now is back to stock.
Noob here, please bear with me:
Updated my I577 to ICS, then rooted it using this thread: http://forum.xda-developers.com/showthread.php?t=1806118
Worked like a charm, then I picked up ROM Toolbox Lite from PlayStore, which worked fine until I tried to change themes.
Somehow, it got to where boot was stuck at vendor logo. Unfortunately I did not Nandroid backup in time, but I was able to do a Kies backup before rooting, so not worry about the data loss at this time.
Used CWM5, did davlik & cache wipes, factory resets several times, no dice. No stock ROM available so I tried this:
http://forum.xda-developers.com/showpost.php?p=30444507&postcount=6
(flashed system tar through ODIN) Hanged at "system.img.ext4".
Here's where I'm at now:
-- Boot looping at second Samsung logo
-- ODIN 1.85 still reads device at port
-- Battery indicator visible when plugged in & power off.
-- Still able to get to cwm recovery 5.5.0.4
So, IS IT SOFT BRICKED OR HARD BRICKED?
Bonus Question: Is it unbrickable?
Any input or answers are GREATLY appreciated, and a fix will most likely be monetarily compensated through Paypal.
Black-wolf, j3r3goss, or shabbypenguin if you see this, your input is certainly appreciated as well!
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
shimp208 said:
If you can get into Clockwork Mod Recovery still then select wipe data (Do this twice), then select whipe cache (Do this twice), next select factory reset (Do this twice), finally go back and select reboot system. This should unbrick your phone for you
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
This.
If you can get into recovery you're only in shallow water
Sent from my MB508 using xda premium
Something's changed
THANKS so far for the input!
I was able to nandroid out of the loop, but now it's back to my original problem--it keeps booting to the "Rethink Possible" AT&T screen & freezing.
Any ideas? I'm thinking I'm gonna be outta luck until I get my hands on a legit Gingerbread Stock tar.
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Samsung Galaxy Ace GT-S5830i brick
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Emil.warm said:
hey there im a noob to all this but i registered to see if someone here could give me advice.
i tried to flash a new rom on my phone (see title) and it doesnt do a thing anymore...
i rooted it and tried to put Retribution beta_2 on it and itlooked to be working till it rebooted..
all i got was the startup screen with galaxy ace gt-s5830i.
i looked around and i found that i could use download mode and odin 1 click download to put in a new rom.
so i tried that and it looked to be working but it stalled at end of install and now it doesnt even turn on anymore...
HELP!!!
hope someone knows whats up and can give me some advice.
i hope i didnr hardbrick it like i saw in this thread...
Click to expand...
Click to collapse
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Samsung Galaxy Ace GT-S5830i brick -
shimp208 said:
Are you able to get into recovery mode? Did you flash a custom recovery such as TWRP or Clockwork Mod Recovery?
Click to expand...
Click to collapse
Hi thanks for your response to my problem,
yes i flashed a custom recovery from clockwork and i rooted it. i cant get in to recovery mode.
after i did that i tried flashing custom rom like i said before but after reboot it didnt do anything.
i just got the startscreen and found that i could use download mode and odin to flash original rom.
i used 1 click downloader from Odin and it started to recover my rom,but at the end it stalled.
after that happened i couldnt do anything anymore.
i thought it was totally dead but i just saw that when i connect to my comp it says unknown device..
im an idiot for trying this stuff without the knowledge..it looked easy in descriptions
but i found different descriptions how to do it..
i cant put links in my posts yet cause i am new..
i used the 1st one.. but after that didnt work i found that other 1 and that is little different...
.android.gs/update-galaxy-ace-s5830i-retribution-gingerbread-2-3-6
.technostall.com/samsung-galaxy-ace-s5830i-installing-retribution-custom-rom-firmware
i hope i have given you enough info
greets Emil
Hmm today i found out smth new,i installed some samsung drivers and now my phone is recognized as a samsung android phone-android composite adb interface its says in device mananger on my laptop.
All Fixed!
shimp208 said:
Did you whipe cache, whipe data and preform a factory reset like we suggested? Preforming a nandroid restore won't get you out of your phone hanging on the at&t logo.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I did all that, but the one thing that finally nailed it was formatting my internal SD. I also formatted my external one, but I don't even think I put it back in the phone.
So, if anybody's reading this in the future, and you're still stuck after wiping the cache, wiping Davlik & performing factory reset,
FORMAT THE SD!
And flash this through Odin: http://forum.xda-developers.com/showpost.php?p=31765274&postcount=59
Huge thanks to j3r3goss!! :good::good::good:
Main Exhilarate thread here:
http://forum.xda-developers.com/showthread.php?t=1926253
Soft bricked my galaxy s4
gagdude said:
Its soft bricked. Hard brick means there is no life at all and won't even power on (through software).
Any soft brick is unbrickable, the only nonunbrickable brick is a hard brick (which is rare)
Sent from my MB508 using xda premium
Click to expand...
Click to collapse
Hey, total noob here but Im having problems with my Galaxy S4 so I was on this thread looking for a fix.I have an AT&T Galaxy s4 (SGH-I337) and I just rooted my phone and installed clockworkmod recovery. I went to backup and then when I rebooted it freezes at the AT&T logo. Ive wiped data/factory reset, wiped caches, etc ive done everything and it freezes at the same spot. I have no ROMS as I had just rooted, just stock 4.2.2. Then I saw a vid on how to unroot/unbrick and it was working perfectly until it went to reboot.(I downloaded 4.2.2 firmware for my model phone) I used ODIN and it said pass then when it was rebooting it froze in the exact same spot (also instead of the normal bootup it still had the "custom" and an unlocked lock that Ive had since I rooted) and now I cant enter recovery mode. It starts booting but then freezes when the blue letters come on! Now even when I try to turn it on normally it freezes at the samsung logo (with unlocked lock and "custom")Please help! I would greatly appreciate it!
Has anyone else had a boot loop problem with the new V of TWRP?? I'm running SOAv3 ROM and had ZERO problems, upgraded my twrp and had about a dozen restarts and freezes and then when I tried to boot into recovery, it boot looped. Fixed it with ODIN, then tried installing it fresh, and got the same thing. Went back to my older version and things are fine once again just wondered if this is isolated or just a known bug??
Yes its a know issue right now go back to the previous working version of twrp and wait for it to get fixed.Also be sure to check big Biff's twrp page before trying to update again to make sure everything is good.
Sent from my SGH-I717 using xda premium
Just update from Padawan V8 to SOA build 3. Was skeptical for a day or so but finally did it last night. Was just about to update to the New TWRP, thank fully I read through all those pages before I did, I usually don't. Saved me a head ache except I forgot to wipe cache's before installing the GAPPS, going to have to re-do that I believe to get the new camera functions from what I've read.
Demmonnixx said:
Just update from Padawan V8 to SOA build 3. Was skeptical for a day or so but finally did it last night. Was just about to update to the New TWRP, thank fully I read through all those pages before I did, I usually don't. Saved me a head ache except I forgot to wipe cache's before installing the GAPPS, going to have to re-do that I believe to get the new camera functions from what I've read.
Click to expand...
Click to collapse
you are correct Sir.....wipe caches and re-flash gapps.....g
psycoartwork said:
Has anyone else had a boot loop problem with the new V of TWRP?? I'm running SOAv3 ROM and had ZERO problems, upgraded my twrp and had about a dozen restarts and freezes and then when I tried to boot into recovery, it boot looped. Fixed it with ODIN, then tried installing it fresh, and got the same thing. Went back to my older version and things are fine once again just wondered if this is isolated or just a known bug??
Click to expand...
Click to collapse
How did you fix with odin? I can't get mine into the download mode to connect to odin. it just keeps boot looping?
whitebrw said:
How did you fix with odin? I can't get mine into the download mode to connect to odin. it just keeps boot looping?
Click to expand...
Click to collapse
Hold volume down and power ...it will go into download mode
Sent from my SGH-I717 using xda app-developers app
thanks but no thanks, when i do that it does the same thing as any other way of starting, just loops.
check out my post if you want.
http://forum.xda-developers.com/showthread.php?t=2202663
Hi all
I just flashed the latest leaked 4.2.1 firmware on my S3 using mobile ODIN. I was running cyanogenmod. It all went through fine but during boot up it just keeps replaying the samsung boot screen.
Have I done something wrong or is this supposed to happen for a long time. I hope I haven't messed up my phone
boot into recovery, factory reset.
yep happened to me before , just wipe/factory reset and it'll take a while for booting for the first time
Sent from my GT-I9300 using xda app-developers app
it has happened to everyone who didn't factory reset when switching ROMs
I also went from CM to stock and also got a bootloop. Factory reset fixed it, but I do have to say I suddenly felt nervous when I saw the boot animation repeating.
that's what's supposed to happen
Thanks guys, done as you said, working fine now