Related
Is there any European or Canada's Bell's Movinand File? for SGS2?
altltkrk said:
Is there any European or Canada's Bell's Movinand File? for SGS2?
Click to expand...
Click to collapse
anyone? any thoughts?
I just did a search and could not find this file. What is it for?
KayvinM said:
I just did a search and could not find this file. What is it for?
Click to expand...
Click to collapse
I believe that It reset the phone completely. makes emptied out factory form and also make the phones base version as the movinand file version
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
archvoidz said:
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
Click to expand...
Click to collapse
CHN?
CHM or CHU?
and are you sure is i9300 and not i9308?
archvoidz said:
I tried flashing a united kindoms firmware on my gt i9300 that i bought from china. It failed and i pulled the plug. Now the only screen i can access is the firmware upgrade encountered an issue page. The only solution i found was to flash the stock firmware for the phone but i have no idea what the stock firmware is. Could anyone help me? what is the stock firmware for the gt i9300 chn chn? Need help asap
Click to expand...
Click to collapse
I9300ZCBLH3
http://kuai.xunlei.com/d/EMRTHMAPDAHC
http://kuai.xunlei.com/d/EMZMNIDTRNNO
Defineptly gt i9300 and it is chn chn
Odia said:
CHN?
CHM or CHU?
and are you sure is i9300 and not i9308?
Click to expand...
Click to collapse
It is a gt 19300 and is chn chn
archvoidz said:
It is a gt 19300 and is chn chn
Click to expand...
Click to collapse
So the links provided by livaye above should be fine.
Doesnt work
Odia said:
So the links provided by livaye above should be fine.
Click to expand...
Click to collapse
I tried that firmware but odin fails again. It loads two bars and then fails. what could be causing this?
Zsblh3
livaye said:
I9300ZCBLH3
Click to expand...
Click to collapse
The one i tried flashing is named zsblh3 as opposed to the zcblh3 link that u gave me. is there a difference or are they for different android os. I wanted the ics one.
archvoidz said:
The one i tried flashing is named zsblh3 as opposed to the zcblh3 link that u gave me. is there a difference or are they for different android os. I wanted the ics one.
Click to expand...
Click to collapse
ZS will only work on the International i9300, you need to use ZC or ZN for the Chinese i9300.
oh
Odia said:
ZS will only work on the International i9300, you need to use ZC or ZN for the Chinese i9300.
Click to expand...
Click to collapse
ur really helpful! thanks for helping me, imma download the zc one and ill get back to you. will this work? and if it fails again, any damages?
archvoidz said:
ur really helpful! thanks for helping me, imma download the zc one and ill get back to you. will this work? and if it fails again, any damages?
Click to expand...
Click to collapse
It should work fine so long as the signatures in your phone have not got messed up.
confused
Odia said:
It should work fine so long as the signatures in your phone have not got messed up.
Click to expand...
Click to collapse
he gave me two links. one i should flash as a pda how about the other one?
archvoidz said:
he gave me two links. one i should flash as a pda how about the other one?
Click to expand...
Click to collapse
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
never done three
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
ive always done just the pda... what i the modem for cause i have yet to get a sim for the device.... is this different than just the pda?
archvoidz said:
ive always done just the pda... what i the modem for cause i have yet to get a sim for the device.... is this different than just the pda?
Click to expand...
Click to collapse
The firmware in the links is what is called a FULL firmware, these firmware are much better than the HOME firmware packages which are just update firmwares. I never use HOME packages.
trouble with download
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
something called thunder keeps downloading when i download the zip...
archvoidz said:
something called thunder keeps downloading when i download the zip...
Click to expand...
Click to collapse
I see you dont read Chinese then :laugh:
Under the file name press the Orange button and then when the dialog pops up press the 2nd button.
...
Odia said:
I see you dont read Chinese then :laugh:
Under the file name press the Orange button and then when the dialog pops up press the 2nd button.
Click to expand...
Click to collapse
what i understand is that thunder is a torrent program and it is torrenting the zip file right? cause only when i downloaded thunder did it let me download the zip
archvoidz said:
what i understand is that thunder is a torrent program and it is torrenting the zip file right? cause only when i downloaded thunder did it let me download the zip
Click to expand...
Click to collapse
Thunder is a download manager, just do what I wrote above.
ok
Odia said:
Thunder is a download manager, just do what I wrote above.
Click to expand...
Click to collapse
can i pm u if i have anymore questions?
messed up
Odia said:
The zip will contain 2 files
CODE_xxx...
MODEM_xxx...
the other is
CSC_xxx...
in Odin put
CODE to PDA
MODEM to PHONE
CSC to CSC
Click to expand...
Click to collapse
Okay so i did what you said but it doesnt even begin to flash or fail. It just says MD5 hash value is invalid and end....
What do i do? also, there were 3 files in that zip. the last one is a pit file. Should i put that in the put slot and flash again?
OK. So I hard bricked my Boost LG Volt 2 (LS751).
I tried a hard reset with no luck.
I am looking for a rom, stock, custom, rooted or not, that will work with a boost Volt 2.
I know how to flash a rom using the LG Flash Tool, given appropriate .dll and .tot files.
If other methods are easier please let me know how to use them, roughly.
Me too
I am having this same problem! Need stock rom. I can't believe there isn't one out there. I really hope someone can help.
I have stock build prop and update zip
I have the stock prop build and dump file
Need know if I made the file flashable
Build.prop
Jaywill2020 said:
I have the stock prop build and dump file
Need know if I made the file flashable
Click to expand...
Click to collapse
Think you can send me the stock build.prop? Email is [email protected]
.prop file
Can I flash my bricked phone using the .prop file?
chrispenn said:
OK. So I hard bricked my Boost LG Volt 2 (LS751).
I tried a hard reset with no luck.
I am looking for a rom, stock, custom, rooted or not, that will work with a boost Volt 2.
I know how to flash a rom using the LG Flash Tool, given appropriate .dll and .tot files.
If other methods are easier please let me know how to use them, roughly.
Click to expand...
Click to collapse
I did this too. Mine is on its way back from LG. They repaired it free of charge add it's still under warranty. I did a factory reset through recovery mode as to erase any traces that i rooted it and they had no clue. It's been about a week and I'll have it back in a couple days. Good luck!
try this one. worked for me. stylo has the same chip as volt 2 (LS751)
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Build.prop
Jaywill2020 said:
I have the stock prop build and dump file
Need know if I made the file flashable
Click to expand...
Click to collapse
Can you email me the stock build prop?
Can u upload the files many ppl could really use it
i also need build.prop.
Jaywill2020 said:
I have the stock prop build and dump file
Need know if I made the file flashable
Click to expand...
Click to collapse
can you please upload the files you have somewhere? even if its just the update.zip please?
there is too many files there
i heard that they make from these files flashable firmware
and there is one for the ls751
any one have idea how to deal with this ?
this is the link :
opensource.lge(dot)com/osList/list?curPage=2&m=Mc001&s
stock tot zv4 ls751
http://xda-android-free.blogspot.in/2016/05/ls751-volt-2stock-tot-rom-lg-volt-2.html
gdeepp said:
http://xda-android-free.blogspot.in/2016/05/ls751-volt-2stock-tot-rom-lg-volt-2.html
Click to expand...
Click to collapse
Why would someone pay you for a password to this file? No one even knows if it's an actual tot file for this device.
hiiiiii
creativetrendz said:
Why would someone pay you for a password to this file? No one even knows if it's an actual tot file for this device.
Click to expand...
Click to collapse
i use this dear
gdeepp said:
i use this dear
Click to expand...
Click to collapse
Yea, sure...
just so you guys know, i beleive that downgrade from ZV4 to ZV5 bricks the phone.
Thank you
onmyroute said:
try this one. worked for me. stylo has the same chip as volt 2 (LS751)
http://forum.xda-developers.com/android/development/guide-how-to-root-lgls770-5-1-1-t3184649
Click to expand...
Click to collapse
It worked for my Virgin Mobile. Thank you!
مرحبا
i am having rom
your ls751 is on zv4 or zv5?
I have a sm-g925f model and my firmware is sm-g925k(korea galaxy s6 edge KT model firmware)
I want to flash over to sm-g925k, next, I want change the firmware sm-g925s(korea galaxy s6 edge SKT model firmware).
if I can do it with flashing pit files and boot loaders and modem? or is it just not possible?
(I tried, modem.bin file faild.. I think modem.bin file match problem..)
help me, plz. Thanks.
gloriously said:
I have a sm-g925f model and my firmware is sm-g925k(korea galaxy s6 edge KT model firmware)
I want to flash over to sm-g925k, next, I want change the firmware sm-g925s(korea galaxy s6 edge SKT model firmware).
if I can do it with flashing pit files and boot loaders and modem? or is it just not possible?
(I tried, modem.bin file faild.. I think modem.bin file match problem..)
help me, plz. Thanks.
Click to expand...
Click to collapse
Please try to explain exactly what you want to do??
You can only flash firmware for your device. Example... if you have the G925F then you can only flash firmware for G925F.
ok, impossible setup another firmware?
gloriously said:
ok, impossible setup another firmware?
Click to expand...
Click to collapse
If your firmware is G925F then you can flash any firmware that is for G925F only
callumbr1 said:
If your firmware is G925F then you can flash any firmware that is for G925F only
Click to expand...
Click to collapse
Well that's not quite true, but I don't know if it really works, since I havent tried it myself. But basically you should be able to unpack the firmware, extract the single partitions and flash them one by one using fastboot. Therefore you need an unlocked bootloader. Then you could also use a korean or whatever ROM. It should in fact be enough, if you flash the system partition, if you just want to change the language. Btw why do you want to change anything? Is something not working? Do you need another language?
Sent from my SM-G925F using XDA Free mobile app
N00BY0815 said:
Well that's not quite true, but I don't know if it really works, since I havent tried it myself. But basically you should be able to unpack the firmware, extract the single partitions and flash them one by one using fastboot. Therefore you need an unlocked bootloader. Then you could also use a korean or whatever ROM. It should in fact be enough, if you flash the system partition, if you just want to change the language. Btw why do you want to change anything? Is something not working? Do you need another language?
Click to expand...
Click to collapse
Im not entirely sure what the guy wants to do...
He mentions 3 different variants.
An unlocked bootloader ia a must but as he states he has g925f which comes with unlocked bootloader. I have a feeling its just the CSC he wants to change.
http://www.sammobile.com/forum/showthread.php?t=27039 here says its not possible. Something to do with phone/modem support.
callumbr1 said:
Im not entirely sure what the guy wants to do...
He mentions 3 different variants.
An unlocked bootloader ia a must but as he states he has g925f which comes with unlocked bootloader. I have a feeling its just the CSC he wants to change.
http://www.sammobile.com/forum/showthread.php?t=27039 here says its not possible. Something to do with phone/modem support.
Click to expand...
Click to collapse
Neither do I really understand/know what he wants to achieve. But let's try our best and maybe in a combined effort, we'll be able to help him
Sent from my SM-G925F using XDA Free mobile app
N00BY0815 said:
Neither do I really understand/know what he wants to achieve. But let's try our best and maybe in a combined effort, we'll be able to help him
Click to expand...
Click to collapse
Sounds good to me when he replies we will do our best
Does anyone know where I can get Stock or Patched Boot.img for GN2200_11_C.12 thanks.
tennyson24 said:
Does anyone know where I can get Stock or Patched Boot.img for GN2200_11_C.12 thanks.
Click to expand...
Click to collapse
160 MB file on MEGA
mega.nz
Thanks, I was able to pull it via a combination of https://forum.xda-developers.com/t/august-boot-img.4491831/ and Extract Boot.img Directly from Device Without Downloading Firmware (droidwin.com)
tennyson24 said:
Thanks, I was able to pull it via a combination of https://forum.xda-developers.com/t/august-boot-img.4491831/ and Extract Boot.img Directly from Device Without Downloading Firmware (droidwin.com)
Click to expand...
Click to collapse
yeah did you notice anyone familiar in that p;ost as well?
DrScrad said:
yeah did you notice anyone familiar in that p;ost as well?
Click to expand...
Click to collapse
I did it was a awesome helper.