[Q] Flashing problems - Galaxy S II Q&A, Help & Troubleshooting

Hi all,
First I would like to thank everyone who`s advice has made life easier for me.
However, despite my best efforts, using ODIN, or ODIN Mobile pro, I CANNOT flash a single file ROM. I have tried maybe 15 times now.
However I have had great success when the ROM file contains separate CSC, MODEM, PIT and tar.md5 files.
I was wondering if someone was familiar with this, and what (if anything) did you do to cure it, or is it simply a case that not all Galaxy SII`s are created equal, and some can be flashed with a single tar.md5 file, and some can`t.
Apologies if this question has been asked before, I have spent half an hour searching to see if anyone has asked this question, with no joy...
Galaxy SII GTi9100 (on 3 UK)

slashnburn said:
Hi all,
First I would like to thank everyone who`s advice has made life easier for me.
However, despite my best efforts, using ODIN, or ODIN Mobile pro, I CANNOT flash a single file ROM. I have tried maybe 15 times now.
However I have had great success when the ROM file contains separate CSC, MODEM, PIT and tar.md5 files.
I was wondering if someone was familiar with this, and what (if anything) did you do to cure it, or is it simply a case that not all Galaxy SII`s are created equal, and some can be flashed with a single tar.md5 file, and some can`t.
Apologies if this question has been asked before, I have spent half an hour searching to see if anyone has asked this question, with no joy...
Galaxy SII GTi9100 (on 3 UK)
Click to expand...
Click to collapse
Looks like you are flashing an incorrect file or its not a tar but the zipped tar .
The norm is single file placed in PDA .
PIT and repartition are not recommended .
jje

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

Will be more easy for you to flash rom with odin mobile. You don't need to select pda or phone, etc. Give a try

JJEgan said:
Looks like you are flashing an incorrect file or its not a tar but the zipped tar .
The norm is single file placed in PDA .
PIT and repartition are not recommended .
jje
Click to expand...
Click to collapse
I see your point, but
When I attempt to flash a ROM with a single tar.md5 (using Desktop or mobile ODIN) file in it, it fails, (everything looks normal, progress bar and all - but at reboot it just loops at the first samsung logo, and gets quite warm)When I attempt to flash this file, I use desktop odin, and put it in the PDA section.
But when I flash a ROM that has 4 files in it (CSC, PIT,MODEM and the main ROM file - again placed in the correct boxes in ODIN) it works fine.
This is a pain `cos I want to explore the world of custom ROMs
Currently running Stock Vanilla GB 2.3.6 which I flashed using the aforementioned 4 file flash method Followed by CWM5 Rooting)
I was wondering if there`s something I`ve missed (but after 15 or so attempts, over the last 3 months, with/without SD card, Booting into recovery mode and doing a cache and data wipe amongst others - I kinda doubt it)
If I have to stick with BG2.3.6, then so be it, But I really want ICS.
Any advice anyone???
Thanks in advance for your time....S

This is a pain `cos I want to explore the world of custom ROMs
Custom roms use mainly CWM recovery which is a single kernel not firmware .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
Can i guess that you are not using a firmware download from XDA .
Never heard of your problem before in the respect that the phone does not take a single file . Wrong file wrong format not unzipped to a Tar file yes often .
jje

Related

[Q] Is there a way to convert a package from Odin to CWM format?

After seeing the report of the SG2 getting bricked while flashing a ROM by Odin, I would like to know if there is a way to convert packages from Odin format (the .tar file) to a package that CWM will do? (the .zip format)
And if it's just changing it from .tar to .zip... then super! But, I'm fairly certain that ain't the case!
Thanks to all the devs giving us some great products. Just want to avoid Odin whenever I can!
Ross
I dont *think* so, then again i could be wrong. You can find roms that developers made that are cwm, and you can just flash those. As far as going back to stock or anything, you are pretty much stuck dealing with odin, its honestly not that bad. If it scares you that much id recommend investing in a USB jig, its about 5$ and well worth it imo, for those scary times when download mode will not kick in or something.
I do have one at the ready! No problems with Odin so far, but, that report just made me fear for that one in a "million?" chance!
Currently trying to figure out whether I like Criskelo or Litening more. (and then VillianROM is calling to me!)
Their isn't bud....can you not get into download mode at all??
Sent from my GT-I9000 using XDA Premium App
I think you can just rename the .tar file to .zip and extract that what's inside and then flash that via cwm.
hrmmm
So that is the 64 dollar (or in the case of this phone 650 dollar) question. If that is actually how easy it is, great! But, if I were to try, and then it were to brick is so that even the jig didn't work... d'oh!
Anyone confirm, that is all that is required?
nfoboy said:
So that is the 64 dollar (or in the case of this phone 650 dollar) question. If that is actually how easy it is, great! But, if I were to try, and then it were to brick is so that even the jig didn't work... d'oh!
Anyone confirm, that is all that is required?
Click to expand...
Click to collapse
No and as the poster has 9 posts and only thinks ,I for one would not try .
Plus a custom rom will usually have a script in it and will have different files to a standard firmware that has a boot file as a starter .
Odin failure rate about 1/4% total failure almost nil .But that as CWM rises considerably if user does not follow the instructions .
jje
A bit off topic, but im looking for something similar. I was wondering if there is any overclocking kernel in zip format so i can flash it through CWM.
Kernels can be flashed via CWM .
jje
CWM.. directions to the T. And Odin the same!
Thanks much.
Ross
JJEgan said:
Kernels can be flashed via CWM .
jje
Click to expand...
Click to collapse
So even tho the kernel is in. Tar? I thought it had to be in. Zip or a zimage for CWM to work
macdaddyau said:
So even tho the kernel is in. Tar? I thought it had to be in. Zip or a zimage for CWM to work
Click to expand...
Click to collapse
Kernels can be flashed via CWM .Yes kernel it is zimage not a tar .
Extract kernel from the tar if its in a tar .
jje
This is odd? No option to flash kernel anymore in tom manager
Sent from my GT-I9100 using XDA Premium App
here is a guide to convert odin tar to CWM zip
[HOW TO][Windows]Extract Deodex Sign and Zipalign an official ROM

[Q] [nOOb Q] Semi bricked phone stock -> CM7.1-> ICS-> CM7.1 -> Bricked

Hi there, please go easy on me. I did search XDA, googled other places and tried other things but getting the same. I am coming from iOS, got SGS2 and played a bit with it. Decided to flash new ROM as samsung stock was slow.
1. Rooted my phone with SuperOneClick.
2. Installed ClockWorkMod.
3. Downloaded CM7, put it onto my SGS2 and installed with ClockWorkMod (volume up+power+home)
4. Went further and got mysellf Simplistic ROM ICS XXLPB installed it with ClockWorkMod
5. Wanted to go back to CM7 so tired installing it with ClockWirkMod but something went wring and I ended up with sem-bricked SGS2
Whenever I fire up the phoone, the battery logo appears but is doesnt show itis charging. When I connect to KIES is isnt connecting the only (good) thing is I can put it in a download mode and Odin sees it so I caan try flashing it but whotever rom I am flashing in, I am getting the same "Invalid MD5 value."
I wanna go back to stock rom ERA PL (I9100XXKE4 ERA 05.2011 2.3.3) when I unrar it i got the following files, seems like PIT file is missing. Have a look at the attached. How do I restore my phone with ondin?
cudo said:
Hi there, please go easy on me. I did search XDA, googled other places and tried other things but getting the same. I am coming from iOS, got SGS2 and played a bit with it. Decided to flash new ROM as samsung stock was slow.
1. Rooted my phone with SuperOneClick.
2. Installed ClockWorkMod.
3. Downloaded CM7, put it onto my SGS2 and installed with ClockWorkMod (volume up+power+home)
4. Went further and got mysellf Simplistic ROM ICS XXLPB installed it with ClockWorkMod
5. Wanted to go back to CM7 so tired installing it with ClockWirkMod but something went wring and I ended up with sem-bricked SGS2
Whenever I fire up the phoone, the battery logo appears but is doesnt show itis charging. When I connect to KIES is isnt connecting the only (good) thing is I can put it in a download mode and Odin sees it so I caan try flashing it but whotever rom I am flashing in, I am getting the same "Invalid MD5 value."
I wanna go back to stock rom ERA PL (I9100XXKE4 ERA 05.2011 2.3.3) when I unrar it i got the following files, seems like PIT file is missing. Have a look at the attached. How do I restore my phone with ondin?
Click to expand...
Click to collapse
Im not an expert so you might want to wait for a more experienced persons comment....
but go to sammobile.com and download the firmware you want to flash....if PIT file is required you can search for it i believe, i remmeber ive seen a place earlier where you can download it.
Hope it helps
ab.riyami said:
Im not an expert so you might want to wait for a more experienced persons comment....
but go to sammobile.com and download the firmware you want to flash....if PIT file is required you can search for it i believe, i remmeber ive seen a place earlier where you can download it.
Hope it helps
Click to expand...
Click to collapse
Thanks, but the thing is I got the stock firmware I wanna use, but I keep getting the same error "MD5 value invalid" is PIT a generic file for all roms or is it ROM related?
cudo said:
Thanks, but the thing is I got the stock firmware I wanna use, but I keep getting the same error "MD5 value invalid" is PIT a generic file for all roms or is it ROM related?
Click to expand...
Click to collapse
Pit comes with each firmware but onSGS2 so far i believe its the same one . Details are on the site you got firmware from follow their instructions .
PIT file is not required and its dangerous for noobs to use .
Invalid MD5 value.
Two reasons why One bad download file corrupted or Two the more usual user is not following the instructions and making their own up .
jje
Thank you for your invaluable help.
can flash cm7 GT-i9100G ????
Go to intratech's thread about firmwares and download from there. And don't use PIT. You don't need it.
Sent from my GT-I9100 using xda premium

[Q] Have I really bricked my S3 (EU) using HEIMDALL?

Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
PS: I just this minute reflashed using Heimdall the I9300XXBLFB. Now it boots up, on first boot it said Updating Android optimsing applications 1/65 and proceeded thru to the point it asks me which language I want... this normal??
kuntstubble said:
Hello all,
I'm hoping someone can advise me with the following problem. I bought a unlocked S3 in Belgium (no branding, network locks etc), and the other day I noticed the latest firmware I9300XXBLFB on http://forum.xda-developers.com/showthread.php?t=1646610
As I use OSX I found out that I needed to use Heimdall to flash it.
I download the ROM, unzipped it, then I renamed the tar.md5 to .tar extracted that which gave me the following files:
boot.img
cache.img
hidden.img
modem.bin
recovery.img
system.img
Now the problem began with the PIT... I required one, and stupidly went off to google in search of an S3 .pit file.... which I found
So I selected the .pit, added the files to their relevant partition, and flashed....
Upon rebooting the phone had updated, however there was no factory reset, everything I had previously was there (to my surprise), but the system info showed the correct rom, baseband, blah blah.
Yesterday I noticed I could not access any internet services. Say I open GMail app, and tried to open a mail, it closed the app after a number of seconds (without displaying the mail contents btw).... no error, just back to the main screen.
I also had problems using 3G or WiFi... nether was stable.
So I reflashed yesterday evening.. at which point I found out how to read in my own .pit file off the phone... but of course I've flashed someone else's previously. I did an MD5 sum on the one I extracted off my phone, and also on the one I downloaded off the net and they still matched.
Still I had the same problems, so I thought perhaps I should drop down a ROM version.
I grabbed a zip file with I9300XXALF2_I9300OXAALF2_I9300XXLF2_HOME.tar.md5 and proceeded to flash it.
Now the phone won't fully boot, it just sits in the Samsung animation and the blue LED pulsing.
I'm guessing I've stuffed up the PIT... the big question is now, what the hell should I do.
FYI I can still get to recovery mode and Odin mode.
Any help / advice would be really appreciated guys.
All the best and thanks in a advance
Click to expand...
Click to collapse
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
gee2012 said:
UNZIP THE DOWNLOADED ROM ONCE FROM .RAR TO .TAR/MD5 FILE. AND PUT THE SINGLE .TAR FILE IN PDA SECTION IN ODIN AND FLASH IT. Really, start to read before you do anything
Click to expand...
Click to collapse
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
OrbNRG said:
the instructions don;t mention requiring a pit, also, why remane .tar.md5 to .tar when the instructions say "Click PDA and select *.tar.md5". seeing as you can still connect with odin, you onlt have a soft brick and you can still use odin and flash something properly.
Click to expand...
Click to collapse
Once again, I'm using Heimdall not Odin. I'm on OSX not Windows.
Secondly the tar.md5 file is a tar file containing all the components that make the ROM.
kuntstubble said:
Erm, think you need to read first... I said I use Heimdall because I'm on OSX.
Click to expand...
Click to collapse
Oke, my bad. I don`t use heimdal so can`t help you.
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
HellcatDroid said:
Go to recovery (power on with pressing VOL-UP + HOME + POWER when the phone is off) and do a factory reset / wipe data.
This wasn't caused by using a .PIT, though: never use a .PIT ever again, never ever.
Click to expand...
Click to collapse
Done that also, made no difference :-(
I don't care which ROM I recover correctly but I do want to get the phone working LOL
Use a windows pc and stop using mac?
Its really easy to fix your problem via Odin....
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
pedja381 said:
U can use usb jig to unbrick ur phone,and in the future,use odin for all the flashing on ur s3..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Stupid reply USB Jig does not unbrick a phone .
ODIN how can the OP use Odin and why would you think its better than Heimdall ??? .
jje
OK the phone is running, but it's bizarre ...
Basically I'm connected to my WiFi signal, and Chrome works 100%... but the normal browser does'nt... just hangs, then closes.
GMail if I open it I can see all the mails, if I click on one, it just sits there with the circle going round, then closes, although if I scrolll thru all mails it does load more... very strange.
Seems any default apps that where installed have connection issues... It's really pi**ing me off....
Anyone?
BTW: *#1234# reports:
AP: I9300XXBLFB
CP: I93000XXLFB
CSC: I9300OXABLFB
It doesn't matter if you change .tar.md5 to .tar i always do it to.
What was the name of the pit you flashed?
Hi,
I downloaded GalaxyS3RootMac which contained a file called
s3pit.pit
MD5 (s3pit.pit) = c67ccbe3628793a9f0dba761c15e0896
Thats the one I used ... stupidly ... so I guess I overwrote mine own one...
I had this exact same thing with browser. That was caused eather from wrong csc or that I mistakenly flashed the firmware using phone field in odin and not pda. Try to change your csc to something else using *#272*IMEI#. That wipes the phone.
Tried what you recommend but still same problem
I choose BTC btw
It previously was on KOR
Sent from my GT-I9300 using xda premium
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
d4fseeker said:
People read the damn topic before posting.
Usb jig is for accessing download mode, which he can do just fine without.
The phone is softbricked, not soft-hardbricked.
I've never used Heimdall but afaik it has caused issues in the past.
Is anyone you know using Windows or can you install Windows as Bootcamp on your Mac?
If so, please try again with Odin, but factoryreset your phone before and after.
Please also confirm you're actually on hardware i9300 or i9300T, not e.g. i9308
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hi, well you're completely correct I could go bootcamp although I prefer not to. If all else fails I'll do it that way. Sadly today I can't get my hands on a Windows system to use.
The phone is a Benelux model I believe (bought from Mobistar), under that battery it says i9300 from what I remember.
Cheers for the logical response
I got exactly the same problem as the OP with the S3, a Macbook Air on Lion, and Heimdall yesterday. I was frustrated but ended up trying Odin on a Windows 7 virtual machine to re-flash a stock firmware. It went through perfectly and I was saved.

brick the phone after flash with a wrong pit file

hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
m_adnan said:
hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
Click to expand...
Click to collapse
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
sak500 said:
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
Click to expand...
Click to collapse
100% agree stay away from PIT unless you really know what you are doing .
jje
sak500 said:
I've had my S3 since may 25th MAY and done tons of flashing of ROMS. Never have i ticked the pit as it was clearly mentioned in all the flashing tutorials. There is no need to do it and dont need to encourage others to do something which can hard brick their phones.
Click to expand...
Click to collapse
JJEgan said:
100% agree stay away from PIT unless you really know what you are doing .
jje
Click to expand...
Click to collapse
its only as a information, maybe somebody runs into the same problem..
It's true that's it's not advised to play with pit files, but I think it would be better if you explained to people why.
Pit files are to be used only when you need to restore partition layout on the phone. That means after you mess up partitions and not before. Bu some guys just ignore warnings like this.
PjotrFias said:
It's true that's it's not advised to play with pit files, but I think it would be better if you explained to people why.
Pit files are to be used only when you need to restore partition layout on the phone. That means after you mess up partitions and not before. Bu some guys just ignore warnings like this.
Click to expand...
Click to collapse
The why is generally that they use the wrong PIT files .
One of the stupid reasons why is going to forum xxxx downloading firmware from them then coming here to ask why has it broke my phone .
PIT mistakes for SG range are in the thousands not just the odd few .
jje
flashed a pit file and now my galaxy s2 is hard bricked
Hi
im new to xda. but having been trying to root my galaxy s2 I9100 through xda tutorials.
my problem started when i flashed a pit file with odin.and now i think its hard bricked. doesn't respond to anything, doesn't show on odin either. ive taken the battery out and have kept it like it for more than 6 hours, with no luck at all. but once i put in the battery to check it becomes hot. even bought a USB Jig and tried, nothing happened. please help as in my country we dont get warranty or we dont samsung service centers. I've tried so many ways to get my phone to life but have failed.. please help:crying:
Does the phone boot to download mode does Odin see the phone .
jje
JJEgan said:
Does the phone boot to download mode does Odin see the phone .
jje
Click to expand...
Click to collapse
nope nothing happens only gets hot..
boboschiyax said:
nope nothing happens only gets hot..
Click to expand...
Click to collapse
One source a USB Recovery Jig and try to enter download mode .Flash stock firmware .
That fails its a paid for service centre job .
jje
JJEgan said:
One source a USB Recovery Jig and try to enter download mode .Flash stock firmware .
That fails its a paid for service centre job .
jje
Click to expand...
Click to collapse
thanks but already did that. didn't work
boboschiyax said:
i think its hard bricked. doesn't respond to anything, doesn't show on odin either.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=32367917
pleaaaaaaaaaase help me !!
m_adnan said:
hi there,
i flash my phone with a wrong pit file, and i run into a problem. its already fixed again by my self, but i want to share my experience with you, maybe someone can use it too.
you can download stock- roms, odin and pit files for your phone on sammobile.com. i found a explanation on samdownloads.de with follow information's:
- pit file with 220 on the end is for 16gb version
- pit file with 322 is for 32bg version
- pit file with 329 is for 64gb version
HOLD ON! This information's are wrong for me, and that's why i ran into this problem.
so i download a rom, and i choose the 322 file for my device and start with the flash process. result from that was, that odin hangs on step, SET PARTITION, and that was it. before, i already deleted the other pit files, while i was thinking i didn't need it. so the first was, i investigate some times to find the pit files on the net again and i start to flash with all files, one after the other..
my phone hangs with 220 pit file, with 322 pit file but i get it successfully flashed with 329 file, which if i believe to samdownloads.de was the file for the 64gb version of the phone.
in my opinion and if i look on my experience right now, for international i9300 32bg version the right pit file was the 329. after flashing it again, my phone was again fully stock, everything was fine, my 25gb free space was there, so its fine.
maybe i can help someone with this information's..
Click to expand...
Click to collapse
i tried 4 pit files to repartition my samsung s3 i9300 but all the result is fault
my s3 now dead
please help me
i search google for all pit files of i9300 but no success
pleaaaaaaaaaaaaaaaaaaaaaaaaaaaaase can anybody help me!!
please help me i did the same thing i have note 3 of n9005 UAE version of 32gb and i flashed a wrong pit file (i.e i flashed N900A pit file in N9005 ) and i tried many pit files using Nand erase all in odin but its not working for me as it just erased the partion in my phone but its not repartioning i mean not replacing any pit file
and odin just showing me error all the time and flashing FAIL
Nothing you can do. If you flash a wrong pit file then your phone is broken. Hard bricked.
The only possibility for you is finding someone with a JTAG box. Try one of those phone repair shops. AFAIK, that's your only hope.
Flashing a wrong pit file is pretty much the worst possible thing you can do to your phone. How the hell did you manage to flash the wrong pit file? Didn't you double, triple, quadruple check that it was the correct file before flashing?
Please don't tell me that you knew that the file was meant for another phone? I've actually seen people do that... :facepalm:
Sent from my GT-I9300 using Tapatalk
NeilH1978 said:
Nothing you can do. If you flash a wrong pit file then your phone is broken. Hard bricked.
The only possibility for you is finding someone with a JTAG box. Try one of those phone repair shops. AFAIK, that's your only hope.
Flashing a wrong pit file is pretty much the worst possible thing you can do to your phone. How the hell did you manage to flash the wrong pit file? Didn't you double, triple, quadruple check that it was the correct file before flashing?
Please don't tell me that you knew that the file was meant for another phone? I've actually seen people do that... :facepalm:
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
It is possible because people usually think in terms of branding. Not aware different models may exist in different regions. Example the note gen1 has Korean and Chinese and US versions, each has a different model number.
XyRo7ec said:
please help me i did the same thing i have note 3 of n9005 UAE version of 32gb and i flashed a wrong pit file (i.e i flashed N900A pit file in N9005 ) and i tried many pit files using Nand erase all in odin but its not working for me as it just erased the partion in my phone but its not repartioning i mean not replacing any pit file
and odin just showing me error all the time and flashing FAIL
Click to expand...
Click to collapse
Here is the pit file for Note 3 SM-N9005 32gb varient.
HELP i think flashed the wrong .tar root file for my Galaxy J7 Pro
Hey man,
XDA doesn't trust me enough to let me make my own post and as I'm writing this I'm supposed to be studying for the 3 exams I will be having.
So,
I rooted my phone susing ODIN and the same root file a few months ago on Android 7.1 and it worked. I used it with TWRP recovery and everthing was fine.
Then the Android Oreo update was released for my phone, finally, and I hooked my phone up to my laptop and downloaded the firmware using Samsung's new Software called SmartThings.
Now I had stock ROM, but my device was recognized as rooted and modified, so couldn't use a few apps like Samsung Health and Pay. Then, without thinking, I put my phone in Download Mode and flashed the SAME .tar root file with ODIN, and now my phone won't boot to the pulsating Samsung logo and is stuck in the bootloader
wanted to say that Odin said PASS when .tar file was downloaded in the AP slot
In download mode,
Download Mode says:
Current Binary: Custom
System status: Official
FAP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
WARRANTY VOID: 1 (0x0303)
I have access to STOCK recovery and download mode, and I've already tried factory resetting phone and wiping cache. I don't want to take more rash steps without someone knowledgeable guiding me. and I cant find any other forum to post on because I'm not a high enough member.
I have fixed when up wrong file pit
My phone is samsung note9 128gb
When i try to up file pit on rom . I had loss my store from 128gb to 32gb
I don't find any solotion on web
And i have go to setting , open development setting. Choose lock OEM. After that my phone restart and recover to 128gb
Please share this solution . I hope it can help many people up wrong file pit and loss data store like me .
File up wrong pit file odin by Lock Oem
Recover Lost data store .

[Q] I think I've stuffed up "Badly"!!

Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.

Categories

Resources