Related
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the PH98IMG methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
---- EDIT WITH SOLUTION ----
Here's my "solution" to this issue. I'm sure it's located somewhere in these forums, but I couldn't find it so I imagine others can't either. Essentially, you're going to have to S-Off. Here's the solution:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
autotuneuser said:
Alright, so I've got an S-On rooted Rezound and I'm stuck in the boot loop. YES I've read all the posts about logging in and dialing *#etc and also to go into Mobile Network and switch to LTE/CDMA, but I can't dial anything because the phone cuts off before I get a chance, and the LTE switch does nothing. I've tried flashing several different kernels, using the adb method and the P87etc methods, I've tried installing several different ROMS, I've done at least 10 different wipes/factory resets, I boot my phone without the cover, SIM card and without the SD card..and I'm still stuck in this boot loop. Someone please help a noob
Click to expand...
Click to collapse
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Magestic12 said:
Have you tried running a RUU to put it back to factory like you just bought it?
I can't tell you how many times I've had to do that to fix stuff.
Click to expand...
Click to collapse
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
autotuneuser said:
I think I have downloaded the stock RUU..but just to be sure could you possibly link me to the correct one to run? Also I thought it was impossible to go back down from Ice Cream Sandwhich to Gingerbread?
Click to expand...
Click to collapse
People say a lot of things are impossible, most have the virtue of never being tried.
This is the one I used to fix mine when I screwed up the partitions on my phone. I will warn you, the link in the thread takes you to another site & you have to sign up to download it. Its completely free & legit, but it won't let you download unless you register which is STUPID!
http://forum.xda-developers.com/showthread.php?p=25664508
Let me know if that helps
Oh & BTW I was & still am on the ICS leaks when I did this, so you'll be fine. You will lose everything on your phone though, because it wipes everything. But if you can't use it, that's not really an issue I guess.
tekhna said:
It is if you're s-on. Also, what did you mean by "P87etc," are you flashing the files properly?
Click to expand...
Click to collapse
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
autotuneuser said:
The PH98IMG file. And I believe I'm flashing the properly..I do it twice; flashboot in adb, it tells me success, I then flash again right there, and then I reboot back to the bootloader and flash again so I do it 3 times in total.
I'm downloading the Vigor executable now. It's going to take a while but I'll report back with my results.
Click to expand...
Click to collapse
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Magestic12 said:
PH98IMG is not going to help you in this situation. You are going to have to download & run the RUU that I linked in the previous post. Trust me on this, not only have I already tried that before, I've blown my phone up enough times to know.
Click to expand...
Click to collapse
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
autotuneuser said:
Ok, I went to use the RUU and at first I got error 150, so I read somewhere I should lock my bootloader, so I relocked and now I get error 140, whcih is bootloader verision error. I think that's because I'm on ICS with S-On right? Is there any ICS RUU I can use to restore my phone? I downloaded Vigor_Stock_Doedexed_3.14.605.5 before but it still wasn't working for me.
Click to expand...
Click to collapse
And as far as this goes yeah you can't use the .exe if your on ICS firmware with s-on and there are no available .exe's for ICS
Sent from my ADR6425LVW using Tapatalk 2
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: http://android.thesmallprint.org/ICS.LEAK.3.14.605.5_PH98IMG.zip. Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
what he said
mikey's comments just previous are totally right, but after install, i would recommend
a factory reset, maybe even twice.
your bootloop problem should be cured then...
I was on the latest ICS firmware running an ICS ROM when I had to run the RUU I gave the link for & it worked fine for me.
Here's my suggestion & you can take it for what its worth.
I would download the latest HBoot & Radios & flash them.
Then if you can get into recovery, wipe everything, manually wipe the system, boot, etc. Then after that try running the RUU.
I just did this earlier in the week & it worked fine & my phone was all screwed up because the partitions were mounting to the wrong places & just all messed up.
I am by no means a dev or an expert, I'm just telling you what I did.
WHATEVER YOU CHOSE, YOU DO AT YOUR OWN RISK, but I don't see where you really have a choice.
Let me know if I can be of anymore help as I know what its like to have a phone that's freaking out on you. You can PM me or post here which ever you prefer. If after that we still can't get it fixed, we'll go find a dev to help us.
mikeyk101 said:
Unless you are already on the gingerbread build, and it sounds like your not, if you are s-on, it simply will not work. My suggestion is to download the latest leak and that should get you going. If it were me, and I aleady did it, download the latest leak here: . Rename it PH98IMG.zip and put it on your external sd card. Should take less than 10 mins to download. Reboot into bootloader and let hboot install it. Make sure you are locked or relocked. After that is installed either delete or change the name of that file. Reboot into bootloader, unlock, and install either amon ra or tpwr and you can reinstall that rooted rom.
Click to expand...
Click to collapse
Well now my recovery is saying it can't mount various things like "E: can't mount b dev/block/ blah blah"
And I tried flashing my ROM through Amon recovery but it's saying it can't open the file because it's (bad). I formatted the SD card and I'm still getting the issue. Any ideas?
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
mikeyk101 said:
Did you download the one from the link? You don't flash that PH98IMG.zip in recovery, you boot up into bootloader and let hboot find it. If when you get to your bootloader and it is fastboot, use your volume key and select on bootloader option. Then hboot will find it and ask you if you want to install it. Install it. After that, you will then need to reinstall either amon ra or the other but stay away from clockworkmod. But to reinstall the recovery, you will have to unlock again.
Click to expand...
Click to collapse
I did install in hboot. I then installed Amon so I could flash the ROM and that's what's giving me all those errors.
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the SD Card, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
mikeyk101 said:
If all you are after is stock and rooted, try looking at this one: http://forum.xda-developers.com/showthread.php?t=1642217
Since you ran the PH98IMG that I directed you to, you are now on ICS. So follow the directions in that thread for "S-On and ICS".
Installation for S-ON Devices on ICS firmware
•Copy ROM to SD Card AND PH98IMG.zip to ROOT of SD Card
•Reboot to recovery
•wipe data / Factory Reset
•Flash ROM
•Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
•Reboot
•Profit!
Edit: The only change I would recommend is to hold off putting that PH98IMG file from that thread on the sd card right away. You will have a hard time getting to recovery if you have that on the card. I would suggest following all the instructions up to and including "Flash ROM". Then I would "return" back to the main Amon Ra screen, make sure you have the data cable connecting your phone to the computer, select "USB-MS Toggle", then select the Internal_sd, and that will allow you to copy the PH98IMG file to the SD card. Then continue with the rest of the directions. If you do this right, you should be ok.
Click to expand...
Click to collapse
It's the actual recover I believe to be giving me the errors, but I'll try what you said in about 2 days (I need to study for finals). It might be because I tried to S-Off and I installed all of that guys software and it might be making the phone act funny. I'll be much more descriptive about my errors when I post back in 2 days.
I fixed it!!
Ok, so I finally got it working, I'll try to detail my steps for anyone else who ran into similar issues:
I believe my recovery started acting funny after I failed to S-Off properly the first time. Amon Ra was all gimmicky and said stuff like "E: can't find cache" and reinstalling the recovery/wiping everything (and I mean everything: external SD, internal SD, cache, partioning SD card etc..) wasn't working. I tried re-installing Amon Ra through command prompt with the adb, I tried reinstalling my ROMS but my phone wasn't having it.
It got to the point all I could boot into was a white HTC screen, so I then tried out Twrp's 2.1 Touchscreen (I wasn't S-Off yet) recovery (I don't have enough posts to post a link yet ) which INITIALLY reported the same "E: can't find cache" errors as Amon Ra, BUT when I wiped my files in Twrp it seemed to actually fix them...I'm not sure exactly what I wiped or formatted that fixed the "E: can't find mount/cache" issues, so try everything.
So my ROM installed but I was still stuck on the white HTC logo. This is where I INSTALLED A NEW KERNEL THROUGH ADB. I wish I knew which kernel I installed, but I have like 10 and I just picked a random one. The point is if you're still stuck at a white HTC screen, install a new kernel.
So I got a recovery on the phone, and then I tried to S-Off again but I didn't have a good ROM installation so that was hanging at the HTC white screen. I then installed CleanROM DE 1.4 and I was able to boot into it, but ran into my initial problem of it crashing after dialing a number and entering infinite reboot. However, it would stay on just long enough for me to run ControlBear's program to S-Off.
So I S-Offed, I downloaded the Gingerbread RUU (the .exe version for Windows), I installed it, and now I can dial numbers and I'm all goodie again. Unfortunately, I honestly think the only way I was escaping my trouble was doing an S-Off, unless they leak a Ice Cream Sanwhich executable for Windows.
TL;DR Install Twerp 2.1 through adb, wipe everything, install CleanROM DE 1.4, install kernel S-Off, run Gingerbread RUU .exe
Not very long ago i was on my phone , and it randomly stopped reading my sim card. So i turned my phone off, pulled the sim and tried to get it to read it again and but my phone would read the sim. Everything else was perfecting fine. So i get back inside and start taking out my sd card, sim card restarting the phone a dozen or so times with no luck, it would only read my sd. Then after i put it down for a bit i tried to get it to read my sim card, and this time when i put it in it told me PUK Code is locked call your service provider to unlock it,
So i start getting a little worried because before this i had just unlocked my bootloader, so i keep trying to do what i did before and when i was trying to get into my settings to try to mount them via the device it froze and then shutdown and has been bootlooping on me ever since. I'm with Mobillicity so i knew if i called them they wouldn't fix it because of my bootloader. I wasnt able to figure out anything about the sim card locking me out either.
- I'm not s-off, i never rooted my phone only unlocked my bootloader because i was unsure at the time how to finish
- I was on ICS latest version
- my device is fully responsive both on it and via usb on my computer
What i've tried so far:
Before i posted i looked a lot of the forums for help and really nothing has worked at all that seems to be working with other people, ive tried:
- I noticed my internal memory wasn't mounting, but i formatted via pc and was able to get it to start mounting
- i've repartitioned my phone from scratch from within 4ext
- flashed both TMWP/4ext with hasoons tool
- tried using my sd card to flash back to stock, which i don't think you can without s-off but i tried anyways, it always just brings me to the bootloader menu again like nothing is different ( i have tried turning the device off, then trying to boot it but it still loops ) I used the OTA for mobillicity posted on xda
Please anyone who has any ideas your help is greatly appreciated, i've only had my amaze for 2 months and i'm left with a 400$ paperweight...
okay lets clam down... take a deep breath and see what's going on..
looks like your trying to flash back to stock is that correct? if so click the link in my signature.. and download the ICS ruu for your carrier..
relock your bootloader with hasoon's AIO toolkit.. and then rename the RUU to PH85IMG (it's already a .zip extension) and place it on the root of your SD card
boot your phone back into the bootloader and it should scan your phones SD card for the RUU... just follow the instructions on screen and your phone should be flash back to stock in minutes
---------- Post added at 12:19 AM ---------- Previous post was at 12:18 AM ----------
the process of flashing the ruu should go something like this www.youtube.com/watch?v=GOojDZMVXmk
That is where i initially downloaded that file, however I'll re download it and try again there is a chance the file got currupted
No luck... It reads PH85IMG.zip fills up the blue bar, then it says "checking PH85img.zip" fill up a gold/brown bar and brings me back to the menu with
fastboot
recovery
factory reset, etc
I tried it 3 times and it's doing the same thing each time
OTA not EXE right?
Relock your boot loader, download the last ruu and make sure it is not the OTA one. Rename it PH85IMG and place it on the root of the sd card. Boot into boot loader and flash it.
It didn't work for you because you didn't lock the boot loader.
hasoon2000 said:
Relock your boot loader, download the last ruu and make sure it is not the OTA one. Rename it PH85IMG and place it on the root of the sd card. Boot into boot loader and flash it.
It didn't work for you because you didn't lock the boot loader.
Click to expand...
Click to collapse
I did relock it, but i used the OTA i'll download the .exe one and flash it and see how it goes.
What Carrier is your phone from.
Mobillicty.
Downloaded the .exe and renamed it, not flashing in the bootloader menu and it's relocked as well. I downloaded it from the link in Ninjitsu's signature.
Any ideas anyone? I've downloaded both RUU's for mobillicity and tried flashing them multiple times with no luck :/
the link for the ruu in my signature is already a .zip you just need to rename the file to PH85IMG and place it on the root of your SD card or phones internal storage and flash it from the bootloader... but the question is when you boot into the bootloader what happens? or what do you see?
Ninjistix said:
the link for the ruu in my signature is already a .zip you just need to rename the file to PH85IMG and place it on the root of your SD card or phones internal storage and flash it from the bootloader... but the question is when you boot into the bootloader what happens? or what do you see?
Click to expand...
Click to collapse
Thanks for replying again, hasoon really confused me... he said not to use the OTA? but that is the only one for mobillicity with a .zip extension i downloaded both and renamed them the .exe one doesn't even flash but he said that is the right one to use?
When i get into bootloader with the OTA on my external sd it checks for the file recognizes it then fills up a blue bar, then says checking PH85IMG.zip and after that gold bar fills up, it brings me back to the bootloader menu again...
my question is don't you need to be s-off to revert back to stock? because i'm still s-on ( i attempting all this with a relocked bootloader )
are you currently on a custom rom? and you can get to your bootloader right? and just to make sure.. your sure that your phone is the mobillicity model.. because if your just using it on mobillicity and it came from a different carrier that might be a reason for the ruu not to work...
if you can get to your bootloader try to do a factory reset from there and see if it helps
Ninjistix said:
are you currently on a custom rom? and you can get to your bootloader right? and just to make sure.. your sure that your phone is the mobillicity model.. because if your just using it on mobillicity and it came from a different carrier that might be a reason for the ruu not to work...
if you can get to your bootloader try to do a factory reset from there and see if it helps
Click to expand...
Click to collapse
im on the 4ext recovery from hasoons tool, and yes i got it from mobillicity i bought it in october could it of come from another carrier even if i bought it from mobillicity?
if you got it from them, then most likely its for them.. i'm not sure why the ruu isn't flashing properly.. let me look around the forums and see.. because some else has had issues like this before.. and i can't remember what they did to solve it.. but let me check and see.. but try the factory reset from the bootloader and see if that might be of any help although i don't know how it would affect custom roms.. can you get to your recovery?
---------- Post added at 07:50 PM ---------- Previous post was at 07:36 PM ----------
hey bad-wolf read this thread someone said before they were able to restore to stock using that method when flashing the ruu didn't work
this person posted the link to that thread
Okay this seems perfect i have one question how can i access the 4ext tools like wipe,restore and such with a relocked bootloader? I was under the impression you could only do those actions with a unlocked bootloader
you can only do them with an unlocked bootloader... your phone needs to be unlocked in order to use a custom recovery...
Well, everything worked fine but now it just sits on the htc logo... i left it for about 15mins and i tried a few times; when i was restoring in recovery it said the md5 sums were not properly aligned or something but i formatted the sd and placed the files on it a few times and it always said that so i don't think that was the problem
thanks for all your help this has been really frustrating for me
Hey everyone,
So I have successfully HTC Unlocked my Rezound bootloader, installed Amon Ra, and then installed and booted the CM9 unofficial. Problem was that CM9 wasn't quite as cooperative as I'd hoped - it is unofficial, after all, and so I decided to abandon that in favor of Nils' Business ROM. Here's where I ran into issues.
I have tried everything in every order I can find online and think of, including Nils' writeup. So, for the life of me, I cannot get the leaked ICS RUU to boot (4.03.605.2 as listed in his instructions on XDA). Install runs fine every time I do it from the relocked (I checked) stock HBOOT, all steps included. Every time it reboots (and I've tried forcing it back into hboot to do the install a second time) it just goes to the white HTC screen and starts boot looping. Tried it a million ways, no go. Also worth noting - the stock recovery doesn't install properly, either. Some'fin is hinky, here.
So I've tried just "assuming" it went fine anyhow and then proceeding with the install for Nils' ROM and same deal, no go, although with one difference. With Nils' ROM, it does display the boot splash screen "Nils Business ROM" or what have you about 1 out of every 4 "boots" in the loop cycle, and then reboots again.
I think I am going to perform S-OFF tomorrow if I have the time, and then try it again using the S-OFF instructions, but I would sincerely appreciate any help from you all. Honestly, I'm at near wit's end with this device, and I don't want to be, I enjoy this chase too much, but I *really* want the reward at the end of it, lol.
Any help is deeply appreciated.
- Katie
Re: [Q]
I'm guessing because of the corrupted recovery, you have a bad download of the RUU. Try re downloading and check the md5 hash for a match. The ruu should reboot itself after the first pass and end up in bootloader again for the second pass.... If not then after the first pass just hold down power + vol down to get back to bootloader.
Hope this helps
Sent from my ADR6425LVW using xda app-developers app
Make sure that you have a booting ROM before you s-off. You will cause yourself all kinds of heartache if you don't.
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Snuzzo said:
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Click to expand...
Click to collapse
Hey, thanks. Yeah, the RUU does check out just fine against an MD5SUM.
nm.... just read your original post again and you say you did relock the phone. I was hoping it was something simple like that that was overlooked.
Carry on...
feralicious said:
Nothing to see here, folks, move along.
Click to expand...
Click to collapse
Right now, I cannot S-OFF because it requires a working stock image, and I'll be lucky to get anything more than CM9 unofficial working here.
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
feralicious said:
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
Click to expand...
Click to collapse
Well that's the trick. CM9 didn't work well enough to even be worth backing up. I'm trying to reinstall it again now just to see if I get there - and it looks like I will. Once I'm back up with that, I'm not sure where to go from there. The phone barely worked under CM9. Really hoping to get Nils' ROM on there, since it gives all the nice features of a stock device without the bloatware. Even if I never get S-OFF, I'll be perfectly happy with just Nils' software.
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
feralicious said:
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
Click to expand...
Click to collapse
I did try wiping everything first. No luck. I will try the CleanWipe tomorrow, because right now, whatever my issues are, I'm being prevented from solving them since I can't S-OFF and I can't even seem to get a working ROM to make the phone worth having! Ugh.
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Thank you, your magnanimity! Seriously, lol, you're gracing my thread just by being here. :victory:
feralicious said:
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Click to expand...
Click to collapse
Thanks for the clicky, Feralicious. Same results, unfortunately. I'm going to try doing the RUU flash of Nils' ROM instead. Do you guys know where I can get the ICS firmware by itself? I cannot be sure that it's actually flashed right, unfortunately.
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
I'll do that stuff and let you know. Thank you!
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
ncc74656m said:
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
Click to expand...
Click to collapse
My DNA said something about failing when I locked it. But it locked just fine.
Since it is failing.
fastboot oem rebootRUU
fastboot oem lock ----if unlocked
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Should work Maybe
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
Click to expand...
Click to collapse
Ok, so, this part including a factory reset got me to "HTC Quietly Brilliant" screen, but then it bootloops again. Tried factory resetting again to no avail. Trying the second part.
Flyhalf205 said:
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Click to expand...
Click to collapse
Same thing as before unfortunately. :/ Performed a factory reset afterwards to be safe - no go. Everything shows OK though in both this and the above install. *shrug*
Flyhalf205 said:
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
ncc74656m said:
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
Click to expand...
Click to collapse
I really wouldn't see why you would need a Sense rom to get s-off. I would imagine it would just need su and busybox installed. But nandroid then try a sense rom again. Make sure you flash the boot.img through fastboot
I know this has been posted before, but my particular circumstance after reading through many threads has not been covered (as far as i know). I normally flash A LOT of new roms because i'm a bit of a ROM junkie and am always interested in all of you wonderful developers creations. So after flashing may 1000th rom, CM10.1, many times and getting bootloops, i decided to give up and restore the fully functional CM10 I was using prior. Well, after MANY numerous ways of restoring my back up, others roms, stock OEM RUU's/Zips, and bootloader NOTHING will get my phone to get past the WHITE HTC LOGO SCREEN!!!
I at one point couldn't access or mount my internal SD, o kept getting an error message so I connected it to windows and it was recognized and windows prompted me to format the internal SD card because it was "corrupted", so I did and tried flashing again through all the above methods and STILL NOTHING. Now every time i boot into recovery, it sometimes takes 50+ seconds to load or if it does load quicker it says i'm in "safe mode" or "enable 4EXT'S ADVANCED SETTINGS". I'm sorry that this si lengthy, but i'm stumped. Can anyone help me????
When I was on evervolv all my partitions were corrupted according to 4ext. No rom would flash. The only way I was able to recover was to downgrade to an official T-Mobile GB RUU. Once I did that everything was fine and dandy again. Hopefully if you do the same it works for you.
Thank you, I am going to try this today and see if it helps. Did you just put the RUU on the root of the external SD or was it and exe file??
Thanks again for your help!!!
PeterC18st said:
When I was on evervolv all my partitions were corrupted according to 4ext. No rom would flash. The only way I was able to recover was to downgrade to an official T-Mobile GB RUU. Once I did that everything was fine and dandy again. Hopefully if you do the same it works for you.
Click to expand...
Click to collapse
silvertero said:
Thank you, I am going to try this today and see if it helps. Did you just put the RUU on the root of the external SD or was it and exe file??
Thanks again for your help!!!
Click to expand...
Click to collapse
No the ruu should be a zip file not an exe. The ruu's I used are for T-Mobile.
Since your S-Off you should be able to do downgrade and upgrade at will. Sounds like your partitions are messed up. Also make sure your SuperCID as well.
Downgrade your amaze to a GB RUU 1.43.531.3
Check MD5 SUMS
Rename it to PH85IMG.zip
Place on your External SD CARD
Reboot phone into bootloader
Let Phone find update and apply update
Let Phone reboot
If that worked and your able to use your phone
Repeat Steps 1 - 8 and use ICS RUU 2.14.531.3 instead of the GB RUU.
You can't flash an ICS Rom if your firmware is still GB.
Also if you want to get the latest update from T-Mobile that address wifi calling and updates your Firmware and Radio for better battery life and reception follow my guide here
PeterC18st said:
Since your S-Off you should be able to do downgrade and upgrade at will.
Click to expand...
Click to collapse
I am having the exact problem as OP but I am S-on, what extra steps do I need to take? Thanks for your help.
EDIT: Since I can't allegedly go backwards from JB/ICS to GB when S-on, the only solution I was able to arrive to on my own accord was to format the internal SD in 4ext. Once I did that 4ext was able to see both internal and ext sd and I was able to flash to my heart's content. I think it was a misaligned partition or something. Fortunately everything on the internal SD was backed up already but in the future is there an easier way to do this without formatting sdcard? I re-locked my phone and tried to flash the latest T-Mobile Stock ICS RUU by renaming it to PH85IMG.zip and letting the bootloader flash it but I still got stuck at the white HTC screen at boot.
rbross3030 said:
I am having the exact problem as OP but I am S-on, what extra steps do I need to take? Thanks for your help.
EDIT: Since I can't allegedly go backwards from JB/ICS to GB when S-on, the only solution I was able to arrive to on my own accord was to format the internal SD in 4ext. Once I did that 4ext was able to see both internal and ext sd and I was able to flash to my heart's content. I think it was a misaligned partition or something. Fortunately everything on the internal SD was backed up already but in the future is there an easier way to do this without formatting sdcard? I re-locked my phone and tried to flash the latest T-Mobile Stock ICS RUU by renaming it to PH85IMG.zip and letting the bootloader flash it but I still got stuck at the white HTC screen at boot.
Click to expand...
Click to collapse
ive got the same thing going on, mine is s-on boot loader unlocked. i dont have super cid. ive tried the stock ruu t-moblie gb. in boot loader it reads it but afterwards nothing. ive even tried relocking the bootloader and trying that way, that way is a little differnt. if you relock bootloader then it will force itself in fastboot every time you try to turn it on or plug usb in from your pc. but you cant get into 4ext recovery.fastboot will read that ph85img.zip. and will try to update, but it fail and say cid incorect. but if you unlock your bootloader agein then your can get back into 4ext, but then your just at square one agein. idk im sumped. if any one can help that would be a life saver.
metalclark said:
ive got the same thing going on, mine is s-on boot loader unlocked. i dont have super cid. ive tried the stock ruu t-moblie gb. in boot loader it reads it but afterwards nothing. ive even tried relocking the bootloader and trying that way, that way is a little differnt. if you relock bootloader then it will force itself in fastboot every time you try to turn it on or plug usb in from your pc. but you cant get into 4ext recovery.fastboot will read that ph85img.zip. and will try to update, but it fail and say cid incorect. but if you unlock your bootloader agein then your can get back into 4ext, but then your just at square one agein. idk im sumped. if any one can help that would be a life saver.
Click to expand...
Click to collapse
You have 2 options here
1. check your cid version download the appropriate ruu for it I've posted a unbranded version ruu in krooks thread and run it while the bootloader is locked..
2. Go to 4ext download a FLASHABLE ROM a gb rom NOT a ruu and flash it from 4ext and turn on smart flash before doing it ...
Either way you get a working device
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
You have 2 options here
1. check your cid version download the appropriate ruu for it I've posted a unbranded version ruu in krooks thread and run it while the bootloader is locked..
2. Go to 4ext download a FLASHABLE ROM a gb rom NOT a ruu and flash it from 4ext and turn on smart flash before doing it ...
Either way you get a working device
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
i wil try the second one.first and see what it does. i cant find that thread, can you put a link up for it?
thanx
metalclark said:
i wil try the second one.first and see what it does. i cant find that thread, can you put a link up for it?
thanx
Click to expand...
Click to collapse
it's pretty much that no threads i'm afraid :/ just flash 4ext then put the rom.zip in your ext sd card then go to tools and enable smart flash since your s on then go to install from sd card>>choose zip from sd card>> then select your zip and flash it if you stuck in a bootloop flash faux kernel while enabling smart flash or flash the stock kernel with aio kit
your welcome i prefer the thanks button tho
ravike14 said:
it's pretty much that no threads i'm afraid :/ just flash 4ext then put the rom.zip in your ext sd card then go to tools and enable smart flash since your s on then go to install from sd card>>choose zip from sd card>> then select your zip and flash it if you stuck in a bootloop flash faux kernel while enabling smart flash or flash the stock kernel with aio kit
your welcome i prefer the thanks button tho
Click to expand...
Click to collapse
ok so it didnt work. i have downloaded caprom its a gb rom and the newst faux kernal. tryed flashing it in 4ext, but it aborts it every time. but now ive tried flashing it thru aio kit. but its looking for the img.file. the faux kernal that was downloaded didnt come in a img.file. but im dowloading the stock kernal i fount and see what happens. scrach that. i forgot for a moment about exstracting it to get the img.file. srry
metalclark said:
ok so it didnt work. i have downloaded caprom its a gb rom and the newst faux kernal. tryed flashing it in 4ext, but it aborts it every time. but now ive tried flashing it thru aio kit. but its looking for the img.file. the faux kernal that was downloaded didnt come in a img.file. but im dowloading the stock kernal i fount and see what happens. scrach that. i forgot for a moment about exstracting it to get the img.file. srry
Click to expand...
Click to collapse
ok so the stock t-mobile kernal worked with the caprom. so farno bugs. everything is working perfectly. i will keep this in mind if it happens agein lol. thanx a bunch man.
metalclark said:
ok so the stock t-mobile kernal worked with the caprom. so farno bugs. everything is working perfectly. i will keep this in mind if it happens agein lol. thanx a bunch man.
Click to expand...
Click to collapse
glad to hear and yea faux kernel is kinda tricky lol
ravike14 said:
glad to hear and yea faux kernel is kinda tricky lol
Click to expand...
Click to collapse
i have a question. im trying to s-off. i cant find a link to download the aio for it. you wouldnt happen to have a link for it would you?
thanx.
metalclark said:
i have a question. im trying to s-off. i cant find a link to download the aio for it. you wouldnt happen to have a link for it would you?
thanx.
Click to expand...
Click to collapse
Well all the inks are taken down sure you can try the Ubuntu version it's safe than the windows version according to the devs
Sent from my HTC_Amaze_4G using xda premium
ravike14 said:
Well all the inks are taken down sure you can try the Ubuntu version it's safe than the windows version according to the devs
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
i wonder why there all down? sadly im not to familiar with ubuntu. i tried to use it a few months ago, to see if i can resurrect my galaxy player 5.0.
but i had no luck with it.
metalclark said:
i wonder why there all down? sadly im not to familiar with ubuntu. i tried to use it a few months ago, to see if i can resurrect my galaxy player 5.0.
but i had no luck with it.
Click to expand...
Click to collapse
noo need to know bout anything all you have to do is run the programme and s off and your done with it
ravike14 said:
noo need to know bout anything all you have to do is run the programme and s off and your done with it
Click to expand...
Click to collapse
i finally got the time to do all this. but i cant seem to get the program to run in ubuntu, i have no idea were the termal cmd is?? any ideas
metalclark said:
i finally got the time to do all this. but i cant seem to get the program to run in ubuntu, i have no idea were the termal cmd is?? any ideas
Click to expand...
Click to collapse
there's the dash board or something similar to that cant remember when you open you get the search option type terminal in the search bar
Still no luck in getting past the splash screen
Well it's been a while since I've posted back on this thread, but I have tried everything that was suggested and i STILL can't get the phone to boot past the HTC Splash screen. I tried flashing many different RUU zips (all renamed PH85IMG) as well as custom ROMS (gingerbread and ICS based) and nothing gets the phone to boot up! They install, but after the phone reboots it's still a no-go. I just don't know what to do anymore. The only thing i can think of is my bootloader is still unlocked, could that have anything to do with this? Like I said earlier my phone is S-ON which makes things more difficult. I'm really hopeless for a solution.
I even mounted the internal and external SD's to the computer and reformatted them. Still doesn't help. Also, my recovery, which is 4EXT, always says i'm in "safe mode" and i have to do something to put it in advanced mode? Please someone help!:crying:
Help
silvertero said:
Well it's been a while since I've posted back on this thread, but I have tried everything that was suggested and i STILL can't get the phone to boot past the HTC Splash screen. I tried flashing many different RUU zips (all renamed PH85IMG) as well as custom ROMS (gingerbread and ICS based) and nothing gets the phone to boot up! They install, but after the phone reboots it's still a no-go. I just don't know what to do anymore. The only thing i can think of is my bootloader is still unlocked, could that have anything to do with this? Like I said earlier my phone is S-ON which makes things more difficult. I'm really hopeless for a solution.
I even mounted the internal and external SD's to the computer and reformatted them. Still doesn't help. Also, my recovery, which is 4EXT, always says i'm in "safe mode" and i have to do something to put it in advanced mode? Please someone help!:crying:
Click to expand...
Click to collapse
I'm having a similar problem only once i get to recovery it won't recognize any of my storage internal or ex, I did a full wipe, i tried reformating the storage from 4ext but it said that there was an error. i cant push anything from the all in one from hasoon because it cant find my phone. im kinda running out of ideas
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help