TL;DR: It works for me. Try it. If it works, good for you.
I patched libril-qc-1.so in a way, that it sends a fixed length of 32 bytes instead of 4. (position 0xa8fc2).
Good luck,
hunderteins
I packaged it up into a flashable zip
How to flash a zip:
Entering recovery mode on phone -XDA wiki
Flashing an update.zip with a custom recovery
Click to expand...
Click to collapse
Requirements:
A custom recovery:
Streakmod
Clockwork Mod [Untested]
Team Win Recovery Project [Untested]
A compatable rom (see below)
Compatable devices and roms:
Streak 5
407 based roms
Stock/deodexed 407
DSC 0.74
MIUI
2.2.1.7
2.3.2
CM7
Venue
408 based roms
Stock/deodexed 408 (untested)
SD4 250 (untested)
Click to expand...
Click to collapse
Install instructions:
Download: update-USSDfix-2.zip
Copy update zip to SD card
Reboot into custom recovery mod
Select "update from update.zip"
Navigate to superuser.zip
Flash
Finished
Click to expand...
Click to collapse
Credit:
hunderteins for making the mod
Click to expand...
Click to collapse
(Original post)
TheManii said:
Could you make a new summary of how the patch works? I remember seeing the explaniation of it in the other thread, but it would be better if it was posted again here so we dont have to dig though it to find the techincal details.
I'm gonna package it up as a flashable zip if you dont mind, who should be listed in the credits? Anyone besides you?
Finally I'm gonna also release it for the venue, as it uses the same libril-qc-1.so (it's byte identical) and could benefit from the same fix
Click to expand...
Click to collapse
I can confirm that this works for me on MIUI 2.2.1.7
Thanks
Works!
You rock!
Works, so fuc#####g cool.
101 , you are great.
Thank you.
I can confirm that is working with dsc 0.74 Thank you very much.
Confirm it works in CM7 "copy/paste in root explorer"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
regards from VN
ramski
TheManii said:
Could you make a new summary of how the patch works? I remember seeing the explaniation of it in the other thread, but it would be better if it was posted again here so we dont have to dig though it to find the techincal details.
Click to expand...
Click to collapse
That was just analysing the bug: GB-roms on the 5treak send only the first 4
bytes of a USSD-code you put into the dialer. This fix is done directly in the
libril-qc-1.so of 407. Just replace the binary-files. There is only one byte
changed. The fixed length of 0x04 -> 0x20. Look into the original post.
TheManii said:
I'm gonna package it up as a flashable zip if you dont mind, who should be listed in the credits? Anyone besides you?
Click to expand...
Click to collapse
Good idea. Thank you. Credits got to TheManii for his file-space and the
deodexed roms. They are very useful. Than there is the gnu-gcc collection
especially objdump and strace. And my mommy of course.
All the rom-cooks for making the 5treak useful. And qualcomm for beeing
such dickheads with qmi so I was forced to play needle in a haystack in arm
assembler.
TheManii said:
Finally I'm gonna also release it for the venue, as it uses the same libril-qc-1.so (it's byte identical) and could benefit from the same fix
Click to expand...
Click to collapse
I keep my fingers crossed for you and the venue.
Reg,
hunderteins
ramski said:
Confirm it works in CM7 "copy/paste in root explorer"
regards from VN
ramski
Click to expand...
Click to collapse
explorer in the folder in the root where I copy the pacth?
whether you can explain to me,, sorry I was not too much about the process
thanks u very much
/system/lib
Works on MIUI 2.2.17 Thanks!
ok its work in my streak
thanks very much
Thank's
works great on stock ROM v 406
repacked as flashable zip, just flash and enjoy
Does anyone know if this would work on the MIUI 2.3.2 rom?
(InsertNameHere) said:
Does anyone know if this would work on the MIUI 2.3.2 rom?
Click to expand...
Click to collapse
You can always make a nandroid and see if it works/breaks stuff, you could also check what the file hash is for the libril-qc-1.so included in it is.
The one it should be replacing is:
MD5: A93DBCBCB846286A8808344A7536F1FA
SHA-1: 7E4A9D57 9E717985 4445FB15 65D07763 2859515F
If your current one matches that it should replace it safely
TheManii said:
You can always make a nandroid and see if it works/breaks stuff, you could also check what the file hash is for the libril-qc-1.so included in it is.
The one it should be replacing is:
MD5: A93DBCBCB846286A8808344A7536F1FA
SHA-1: 7E4A9D57 9E717985 4445FB15 65D07763 2859515F
If your current one matches that it should replace it safely
Click to expand...
Click to collapse
Brilliant, checksum is the same as checked with Root Explorer, so i am gonna have this patch, its been such a long wait to have USSD codes working!!!
I am getting the following error in streakmod recovery:
Error in /sdcard/update-USSDFix-1.zip
(Status 6)
Installation aborted.
Used root explorer to copy libril-qc-1.so.
USSD codes working on MIUI v2.3.2 !!
Agent5150 said:
I am getting the following error in streakmod recovery:
Error in /sdcard/update-USSDFix-1.zip
(Status 6)
Installation aborted.
Used root explorer to copy libril-qc-1.so.
USSD codes working on MIUI v2.3.2 !!
Click to expand...
Click to collapse
Yep it works, great job guys, i too had to copy the file using Root Explorer, got the above error.
Agent5150 said:
Error in /sdcard/update-USSDFix-1.zip
(Status 6)
Installation aborted.
Click to expand...
Click to collapse
Whoops! there was a typo in the script, i'll upload a new version in a sec.
Edit: uploaded fixed zip now, tested and flashes fine
Related
I just made a skin for HTC Sense Lockscreen, this file includes Skinned NavBar also.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Instruction :
*You rom must should be deodexed before using this.
*Backup your com.htc.resources.apk to your PC or SDCard.
Click to expand...
Click to collapse
Flashable zip
1. Download
2. Flash it like a rom via Rom manager or clockworkmod recovery
Click to expand...
Click to collapse
ADB Method
1. Download the Zip file, Unzip and put the apk file in ADB folder
2. Boot into recovery mode.
3. Open Command Prompt, point to your ADB folder
4. Type this:
Code:
adb shell mount /system
adb push [COLOR="DarkRed"][B]com.htc.resources.apk[/B][/COLOR] /system/framework/[B][COLOR="DarkRed"]com.htc.resources.apk[/COLOR][/B]
5. Reboot your phone.
Click to expand...
Click to collapse
Get into trouble?
- Use your backed up com.htc.resources.apk from Step 1 and push it back to your phone.
Click to expand...
Click to collapse
Don't want this apk 'cause the one on your phone is different?
Drawable-mdpi folder
You have to replace this folder into your com.htc.resouces.apk/res/drawable-mdpi yourself.
Click to expand...
Click to collapse
Thanks a lot, Cryshop! Keep up the good work mate
Can you post it in the form of flashable zip file from recovery?! Far easier than ADB...Thanks
zorbakun said:
Can you post it in the form of flashable zip file from recovery?! Far easier than ADB...Thanks
Click to expand...
Click to collapse
updated 1st post, not sure it would work or not
cryshop said:
updated 1st post, not sure it would work or not
Click to expand...
Click to collapse
1st of all, thanks cryshop! Nice work, I'm glad you found the time!
2nd, the problem with the zip is, that the whole resources.apk might be different...for example I extracted those files and put them in my .apk...
3rd, does the ROM really need to be de-odexed? What if I put the different png's to my resources.apk ? - edit, You don't have to be deodexed, it works just fine on B 0.1 Rom, which is not.
EDIT2: When I touch the display(screen locked text appears) part of the image sems to lose it's transpatency settings - there is a vivid ende below the text - is this normal?
Thanks!
cryshop said:
updated 1st post, not sure it would work or not
Click to expand...
Click to collapse
It works just fine by flashing that zip.
Dr.Romca said:
EDIT2: When I touch the display(screen locked text appears) part of the image sems to lose it's transpatency settings - there is a vivid ende below the text - is this normal?
Thanks!
Click to expand...
Click to collapse
The black half-transparent rectangle at the bottom causes that. It seems to be something in the xml files which I'm not able to edit. I can retouch graphic files only, sorry for that
nice work! I just made a bit more space between the 2 arrows.
Cause it was overlayed by the text saying: "screen locked" (since in dutch its scherm geblokkeerd) and that's much longer
png is attached for dutch people or people that want more space between the arrows (hope you don't mind cryshop otherwise just tell me and I'll remove it asap)
Really like your work
JonasDroid said:
nice work! I just made a bit more space between the 2 arrows.
Cause it was overlayed by the text saying: "screen locked" (since in dutch its scherm geblokkeerd) and that's much longer
png is attached for dutch people or people that want more space between the arrows (hope you don't mind cryshop otherwise just tell me and I'll remove it asap)
Really like your work
Click to expand...
Click to collapse
Haha, I didn't notice the language issue, it's perfect fit in English, thanks!
hello,
very nice lockscreen and ather custom stuff. Can you make a rom with all of them?
it works on stock 3.15 rom?
Blindie said:
hello,
very nice lockscreen and ather custom stuff. Can you make a rom with all of them?
Click to expand...
Click to collapse
Yes, that's my plan, but there're a lot of things need to be done.
it works on stock 3.15 rom?
Click to expand...
Click to collapse
Yes it does
yas, yas, yas
dou you need any tester
Nice work!
what wallpaper u use in this picture... looks really nice
didn't suport for the B rom?
Looks very nice!
Will try it!
Work and nice for my private ROM
Thanks
Hi Cryshop,
Just a question here, but could you make a lockscreen that would correspond with your navbar? It would actually need editing of one png The shape is OK, but the style would look nicer
I tried 3ds max to make one, but I need some study in that
Dr.Romca said:
Hi Cryshop,
Just a question here, but could you make a lockscreen that would correspond with your navbar? It would actually need editing of one png The shape is OK, but the style would look nicer
I tried 3ds max to make one, but I need some study in that
Click to expand...
Click to collapse
I'll make one later, from now on, get Metamorph ready
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pay Attention: If you have posted this rom in your site/forum, please update it. (not only the download link, but the whole page)
Introduction:
Hello, I have made this for myself, but since other peoples wanted to have something that isn't available while i got what they want so i thought i can share this with you.
My goals are having this build updated, stable and usable.
If you like it, please post bugs and suggestions, that is your way of saying thank you!
I really hope you enjoy it.
Requirements:
An HD2.
MAGLDR 1.1*
USB Cable.
You.
Installation:
1.Download "Feather miui rev.*"
2.Create a folder "miui" (DO NOT CHANGE IT! IT SHOULD STAY "miui")
3.Enter MAGLDR's Menu.
4.Select 'Services' > 'BootSettings' > 'AD SD Dir' > 'miui'.
5.Boot it using 'Boot AD SD"
6.Take a look at the F.A.Q!
Disclaimer:
This comes with no warranties, if you use it you do it on your own risk.
Credits:
Google, HTC, Cotulla or just the DFT, imilka (for teaching me how to cook), AmeriCanDroid (For the Kernel), Jaws (for his nand rom base), MDJ, Markinus, gauner1986 (based on his build), danij3l, LeTama and many others...
Donations:
Donations are welcome. I don't do this for money, but feel free to donate if you find my work useful. [PM ME]
Other info.:
Rev = Revision: version, a production of which could be called a revision.
Recommended Apps:
-A Sense like clock widget
-Extended Power Control (replaces all the Sense Settings/Dashboards)
-Current Widget (Control your battery drainage)
-Root Explorer (A file explorer which can access the root dir)
-SetCPU (A great application which can Overclock or Underclock your CPU)
-Button Saviour or Savior (With this, your HD2 will never have problems with the Hard-Keys)
F.A.Q:
Waiting for questions..
Changelog:
Code:
[B]Version: "Rev.1"[/B]
-Initial release.
To-Do list:
Code:
-Update to the latest MIUI version [1.2.19]
Issues:
Code:
-Root issues.
-After a reboot, almost all the applications showing fc's
-Wifi, data, bluetooth are not working.
Screenshots:
Downloads:
Latest version:
Version: Rev.1
Status: Uploaded.
Link: MultiUpload
Older versions:
-None yet.
MUIU fan
First?
I would love to boot this rom from MAGLDR- Edited rootfs? available?
yes.. its ready, just uploading.
hmm, ok thanks but how to change language ?
A release for SD only?
tnx for your work
Done. here's the link: http://www.multiupload.com/AVNNIFT1SN
Download link updated.
white-energy said:
Done. here's the link: http://www.multiupload.com/AVNNIFT1SN
Download link updated.
Click to expand...
Click to collapse
Thanks,
Downloading now & will feedback later on.
fiocco said:
hmm, ok thanks but how to change language ?
Click to expand...
Click to collapse
i would like to have german language..
how can i get it there?
what about SD ?
-About the Language packs.. i'll think of a way to suit everyone's needs..
-About booting from SD via WinMo.. i have no idea.. would be nice if someone try it and feedback
white-energy said:
-About the Language packs.. i'll think of a way to suit everyone's needs..
-About booting from SD via WinMo.. i have no idea.. would be nice if someone try it and feedback
Click to expand...
Click to collapse
I will try brother ... just for u
10 min >>> downloading\
انا اريد استخدام صورة توقيعك ~.~"
can I ??
edit : Rom Working on SD but I used dandiest intrid and files expect the kernel and system.ext2 to get it working
The rom until now looks stable
You can use my signature picture but don't forget to include my name next to it
Okay, thank you i'll try updating it.
white-energy said:
You can use my signature picture but don't forget to include my name next to it
Okay, thank you i'll try updating it.
Click to expand...
Click to collapse
or just let me play with it found some bugs over using dandi intrid and other kernel and other files
error. Camera and WIFI not working!!!
huydong21164 said:
error. Camera and WIFI not working!!!
Click to expand...
Click to collapse
confirm that wifi gives an error upon activating
stupid question...?
I'm not really sure what I'm doing yet. Do I need MAGLDR if I'm running 6.5? I thought I read somewhere thst was only needed with 7. Any help or guidance would be greatly appreciated. Thanks!
For magldr only?
mcbyte_it said:
confirm that wifi gives an error upon activating
Click to expand...
Click to collapse
Confirm!
Here is the latest AMJ3 ROM, modem and kernel for our i8190 devices. Don't try to install it any other variation of the SIII mini! Just download and install via recovery. If you don't have network once booted after flashing modem, just reboot and it will be OK.
ROM
This is the stock AMJ3 ROM with some changes:
Rooted with Chainfire's SuperSU
Pre-installed busybox for apps
All apps deodexed for flexibility
All apps zipaligned for performance
The zip file is signed
The ROM was debloated of some unnecessary apps. I removed exactly the same apps as tys0n's on his ROMs to be on the safe-side. You can download any of this apps using tys0n's repository.
The zip file contains the AMJ3, so you don't need to flash it separately. The installer will automatically wipe system/cache/dalvik partitions. If you are coming from a non-stock ROM, please wipe data yourself using your recovery. This ROM can be flashed using both TWRP and CWM, but I recommend TWRP.
If you want to update your baseband along with the ROM, flash the modem from this thread.
Download: https://mega.co.nz/#!wMlAwKTD!O2wNgn0OTvNYTzjt3GZqQVa5MURToMyzIkc0nom2tPU
MD5 checksum: 59cd1790bcabf8cb58288f18732b46eb i8190xxamj3.zip
If you don't have a recovery, you can use my Odin package. This will flash AMJ3 ROM, kernel and baseband, plus a TWRP recovery modified by Maclaw so it works with Android 4.4 KitKat ROMs. If you have a non-stock ROM installed, make sure you boot into recovery after flashing and do a factory reset!
For flashing this, make sure only Auto Reboot and F. Reset Time are checked, select the file clicking in PDA and hit start.
Download Odin Package: https://mega.co.nz/#!lV9wlRwa!LZHXF35W-JPJETUW0YPYhx49pBZWTJzW7PjJwugmfUk
Note that I compressed this file using 7zip. This way the file will be 100MB+ smaller than using zip and speed up my upload and your download. It's a win-win! If you don't know how to extract it, download 7zip.
Modem (baseband)
https://mega.co.nz/#!FAlWSApA!KsnCOmH5zI6ynml8Df_rWTpxdlYyT_GLgSMMbnpTkgE
Kernel
https://mega.co.nz/#!dNEgyQBZ!Dd_qvmaid24ZukAjJBHDcjoLKyA8_4HcMCVcoSlSQaE
Both modem and kernel installers are based on tys0n's work. The modem is a copy-cat from somin.n's work.
Enjoy!
Updated with kernel Have fun
Hi,
Q: Extracted from which ROM?
Downloaded modem from mega and from xda too but got update error :/ Can you check it please... Btw thank for it ofcourse
somin.n said:
Downloaded modem from mega and from xda too but got update error :/ Can you check it please... Btw thank for it ofcourse
Click to expand...
Click to collapse
I'll check it out. It worked here, must have something to do with the file I uploaded.
joelalmeidaptg said:
I'll check it out. It worked here, must have something to do with the file I uploaded.
Click to expand...
Click to collapse
I have the same probl here, fix it please.
OK I found what it is. I'm going to take out the links and post back once I upload the files. Sorry!
joelalmeidaptg said:
Updated with kernel Have fun
Click to expand...
Click to collapse
hi bud,
thanks for latest kernel and modem
Can anyone tell me whats new in this rom? Samsung doesn't provide any changelog as usually.
Fixed the modem. Everything should be fine now. Uploading the kernel!
Gusta_HR said:
Can anyone tell me whats new in this rom? Samsung doesn't provide any changelog as usually.
Click to expand...
Click to collapse
which ROM???
these are just updates for kernel and modem
joelalmeidaptg said:
Fixed the modem. Everything should be fine now. Uploading the kernel!
Click to expand...
Click to collapse
Works perfect now with cm10.2. Thanks a lot bud)
mauam said:
Works perfect now with cm10.2. Thanks a lot bud, will push your thanks tomorrow
Click to expand...
Click to collapse
dito bud,
waiting for the kernel
Aaaaand kernel is up. I'm going to try to deodex/root/debloat the ROM now. It will be my first time so I can't promise I can make it
joelalmeidaptg said:
Aaaaand kernel is up. I'm going to try to deodex/root/debloat the ROM now. It will be my first time so I can't promise I can make it
Click to expand...
Click to collapse
you will try it with OTA-Kitchen ???
btw kernel and modem update work great - thanks
Just finished the ROM. It is going to take a while since my upload speed sucks. Probably it will be ready in about one hour
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I uploaded the ROM. Please let me know if everything is working - first timer here!
Have fun
JackoMJ said:
which ROM???
these are just updates for kernel and modem
Click to expand...
Click to collapse
Wtf r u talking about. Its a new f****in Stock Samsung build i8190XXAMJ3. When did you see only modem and kernel update???? Kernel and modem are ripped out of new rom build.
Gusta_HR said:
Wtf r u talking about. Its a new f****in Stock Samsung build i8190XXAMJ3. When did you see only modem and kernel update???? Kernel and modem are ripped out of new rom build.
Click to expand...
Click to collapse
hey little boy,
calm down, be friendly, use other words and don´t be so aggressive!
Posting that:
which ROM??? these are just updates for kernel and modem
Click to expand...
Click to collapse
, there was only modem and kernel for download.
Look at the upload-date of the ROM.
When you are frustrated, aggressive or something else, go to the gym or in the wood and let your rage out there
JackoMJ said:
hey little boy,
calm down, be friendly, use other words and don´t be so aggressive!
Posting that: , there was only modem and kernel for download.
Look at the upload-date of the ROM.
When you are frustrated, aggressive or something else, go to the gym or in the wood and let your rage out there
Click to expand...
Click to collapse
I agree, no need for that language.
Q:
Can you make this Odin flashable?? I dont have cwm or TWRP for now...
TNX in advance!
It can be run for all LG G2 series D8xx. Or ls980 vs980 and then you follow the original article here:
http://sccn.vn/threads/stock-fix-v30e-for-lg-g2-f320lsk.8236/
All Stock Lollipop LG G2:
http://sccn.vn/threads/stock-lollipop-for-g2-all-variants-d8xx-vs-ls980-l01f.8070/
This version has what?
Fix error message.
Fix hear calls.
There mute camera.
NaviBar bar has the dimensions (20, 25, 30, 35, 40 DIP).
Open Full Qslide.
There are call recording within the installation.
Walkman.
How to Install:
Download Zip Stock copied to the memory of the machine.
Full Wipe and flash rom.
Flash always Walkman if desired link below.
Flash Super Su to root.
Reboot and enjoy.
Download:
Mod edit: Removed.
Walkman:
http://sccn.vn/threads/stock-fix-v30e-for-lg-g2-f320lsk.8236/#post-69305
Super Su
http://download.chainfire.eu/692/SuperSU/BETA-SuperSU-v2.43.zip
File full bug fix:
Download unzip the password is sccn.vn we are 3 folders:
Build.prop folder, then you select the right machine line you copied into the system and 644 lightning.
LGSystemUI.apk folder you copied the file into the system inside and then cut at 644 has reviewed 644 files in system / system / priv-app / LGSystemUI and 644 lightning and reboot.
Navi Bar select the size of the desired and copied to the system at 644 and then cut into the file system has lightning 644 / framework-res and reboot.
Download:
https://www.fshare.vn/file/IQX7UHK6SAQL
Vip Fshare:
http://sccn.vn/threads/share-vip-fshare-update-lien-tuc.7402/
Apply G2 Other:
Particularly with DCM brother or brothers G2 G2 is currently running his rom @huynh Duy Linh @animevn @ctqtdndtbn the folder on sccn.vn in rom and delete all the files as shown and leave system.img file and up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: When all the above steps then you Factory Reset and offline experience .
Wait, this doesnt work on ALL G2 series. V1.1 isnt uploaded yet.
Eminemiero said:
Wait, this doesnt work on ALL G2 series. V1.1 isnt uploaded yet.
Click to expand...
Click to collapse
works well if you know how.
I will try thanks!
So after deleting all these files it can be flashed on d802?
how exactly can it be used on d802??
Sent from my LG-D802 using XDA Free mobile app
VS98026A works well but other versions have issues. I would wait if you have other variants. It's not for newbies, yet. It does not help that the O.P. is very vague and the linked post is in Vietnamese !!! Mega is faster but Fshare is sloooooooow (6-8 hours download)
Waiting for stable version
vandieutot said:
works well if you know how.
Click to expand...
Click to collapse
Can You tell how to install other wariant on D802 ?
I would like to test this build, but the estimated download time is 2-4 days.
Azargardius said:
Can You tell how to install other wariant on D802 ?
Click to expand...
Click to collapse
Instruction in the OP. Just delete the highlighted files from the zip file. Use either winrar or 7zip
vandieutot said:
works well if you know how.
Click to expand...
Click to collapse
It takes forever to download from fshare so here what i did; downloaded the stock 30E kdz, extracted and got the system.img from 30E. It supposed to work right? If its, can some uploaded the template. Thanks.
Edit: I figured it out, it is the same system.img.
Guys I will share a mirror from mega of the stock once done. I hope this will not be respectful to @vandieutot
Deleted the files and flashed the rom over cloudy g3 2.1, didnt boot just kept loading . Then tried flashing after complete wipe(including system) then the recovery says no os installed.
Using D802. Is it obligatory to flash it over stock kitkat?
how can this work? when only applying system.img the handy won´t have network.. without modem it can´t use data or is the kitkat modem compatible?
ebautista said:
Guys I will share a mirror from mega of the stock once done. I hope this will not be respectful to @vandieutot
Click to expand...
Click to collapse
That will be just great.
We are waiting for this.
This is bull**** guys dont listen to this guy, lollipop cant boot on other model if it dosnt have aproparate kernel, so dont waste you time here and wait for lg to relese the firmware. Or you can try to wait for guys on vietnamies forum to relese 1.1 with moded kernels. And 1 more thread of the same **** mods pls close this.
Has anyone got it to boot on the D802 i have tried multiple times but i cant get it to boot after deleting all the files.
Please write the first topic in a understandable English....!
Work on D802?....
Well here it is... Android 5.1 build LMY47M in all its stock glory!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Preface
Stock Rooted... Busybox and init.d support already built for you!
This is based 100% on the stock Google image!
You can get the flashable radio and bootloader from HERE!
Features
Stock
De-Odex
Powered by SuperSU by @Chainfire
Busybox with init.d support
No added features or mods
Persistant ADB
Decrypted boot.img
Install
Copy ROM to storage
Reboot to TWRP recovery
Factory reset
Install zip.
Reboot
Profit!
MOD EDIT: Link removed as domain has expired. Thread closed until new links can be installed
Hit Thanks! It cost nothing and you will feel good!
[/CENTER][/SIZE]
Thanks to @mrjaydee82 for the odex base that I de-odexed
This is the same ROM has his but just de-odex'ed for easier modifications.
Please hit Thanks and rate the thread 5 stars!
Sharing Policy
You are free to use this ROM or any part of this ROM any way you like as long as you give proper credit! We know our work so don't try to cheat!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
The boot loader and radio the same as "E"? Or should we update this as well if were on e? Thanks for keeping is up to date on all these versions lol
Edit : nm clicking on the link answered my question
flyinj54 said:
The boot loader and radio the same as "E"? Or should we update this as well if were on e? Thanks for keeping is up to date on all these versions lol
Edit : nm clicking on the link answered my question
Click to expand...
Click to collapse
Sorry, I actually had the wrong link in the OP.
I updated it with the proper link.
However you may want to experiment with Radios as everyone gets something different out of them.
@scrosler
thanks for your hard work. for me I wait LMY47I Odex ?
Sent from my Nexus 6 using Tapatalk
can you get me a alternate download link i am always gettin the error 552 website is offline sorry scotts and thanks
davemlinux said:
can you get me a alternate download link i am always gettin the error 552 website is offline sorry scotts and thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934548264
Cant seem to download it... Anyone else or is it just me?
Working for me right now...
Seems fine to me.
Is that firmware/radio zip flashable through Twrp?
Also, is force encryption disabled?
Which gapps do you recommend?
Do you think I could ask more questions in one reply? ☺
Thanks for the great work.
Sent from my Nexus 6 using XDA Free mobile app
machostallion said:
Is that firmware/radio zip flashable through Twrp?
Also, is force encryption disabled?
Which gapps do you recommend?
Do you think I could ask more questions in one reply? ☺
Thanks for the great work.
Sent from my Nexus 6 using XDA Free mobile app
Click to expand...
Click to collapse
Yes force encryption is disabled. Gapps are not required as this is a stock Google rom not a aosp. The firmware radio zip is not flash able through twrp it is a Windows executable fastboot file (unless this has changed since I flashed it awhile ago). Somewhere it explains how to use the firmware zip file I'll see if I can find it for you.
Ok so looking at the zip file for the firmware I believe it has changed from what it was when I flashed the e version of firmware and radio. It appears now that you do not have to use windows/fastboot to flash this file anymore. It looks like to me u should be able to flash through twrp. Can someone else confirm?
I'm 99.999% positive looking at the zip file it can be flashed via twrp.
Anyone dirty flash this over the E build? Also, will having Franco kernel be an issue or can I just flash away?
squattingdonkey said:
Anyone dirty flash this over the E build? Also, will having Franco kernel be an issue or can I just flash away?
Click to expand...
Click to collapse
Are you on stock e rom? I don't see any issue flashing from E. Its really pretty minor changes so you shouldn't have any issues. But of course always make a backup and clean flash if you have issues.. Also Franco kernel will work fine with any 5.1 build. I don't believe the boot images have changed throughout all these new images
Yep, I'm actually on his E rom, odex, with Franco. I went from D to E dirty. Let's try it again, eh?
squattingdonkey said:
Yep, I'm actually on his E rom, odex, with Franco. I went from D to E dirty. Let's try it again, eh?
Click to expand...
Click to collapse
Oh yeah you'll be fine
Is there an Odex version of this? I've been on your odex e build for a while and wanted to try the latest. Thanks!
i am trying to install some script in the init.d
but i cant find that folder. This does have init.d correct?
Would it be possible for the original poster to make a Stock 47M ROM that is NOT rooted (but DOES disable forced encryption!)?
I'm having a serious problem with Real Racing 3 on this build. It won't start. EA's support says 3.2.2 fixes issues with nexus 6 and 5.1. I think they are full of crap, but as I'm rooted, I know any crash reports or stuff I send them will likely be tossed as they don't 'support' rooted devices. So I'm hoping to get a T-Mobile build that's not encrypted but also not rooted just to see if the RR3 crash occurs and send them a crash dump.
Thanks in advance, or if you know who DOES have a 47M unrooted/decrypted flashable ROM I'd appreciate it.
Randy