Related
I installed the CLEANrom tapped edition rom after wiping everything as instructed. It boots and initially I had issues with wifi working, but that seems to be working after flashing a stock kernel. Now if I try to play anything with sound or change the volume using rockers or in the phone itself it forces a reboot.
Any ideas?
Thanks
You are probably on old firmware and need to flash the patch
http://www.myandroidfiles.com/Downloads/Rezound/3.14.605.5/GB%20Firmware%20Patch.zip
Sent from my Rezound
Still having issues
Thanks for the reply. I actually ended up flashing it back to the rom that I had. I also made sure I flashed it to the original recovery as well which is amon ra. The rom I flashed it back to was the clean rom standard 4.4.
Unfortunately, I'm having the same problem no. If I go into the dialer and hit a number it freezes and force reboots. If I hit the volume rocker, it freezes and force reboots. It just force reboots for almost everything except for texting and going into apps.
any thoughts? The 4.4 worked fine on the firmware that's on here, and I did do the wipe and reset before I installed back. Maybe I bricked it?
Definitely not bricked. You wouldn't be able to even boot if bricked. What firmware are you on?
Here is some information
CleanROM standard 4.4
htc sense version 3.6
android version 4.0.3
kernel 3.0.16
I think the hboot was 2.11 or something like that.
Yeah, I figured it's not totally bricked. It should be on ICS. The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Mr. Lando said:
CleanROM standard 4.4
htc sense version 3.6
android version 4.0.3
kernel 3.0.16
I think the hboot was 2.11 or something like that.
Yeah, I figured it's not totally bricked. It should be on ICS. The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Click to expand...
Click to collapse
Even though your on ics, it looks like your on gb firmware. Search for the gb patch for ics and flash in recovery and problem solved
2.11 hboot is gb firmware, 2.21 or up is ics firmware
Mr. Lando said:
The issues started when I removed my old rom and put on this tapped edition clean rom which was listed as a good rom to use in the rezounds rom options. Kinda stupid that it would create this whole mess if it actually was a working rom. Maybe it shouldn't be listed... lol
Click to expand...
Click to collapse
It runs just great on the correct firmware lulz
Correct Process for Updating firmware
Hello,
You stated that 2.11 in the hboot indicates gb firmware. Do you know a link to the correct thread that would give me the appropriate process for updating the FW one that will work with the CLEANrom 1.4 dev version? I got the wifi working again after flashing the "old firmware patch" and then reloading CLEANrom 4.4 everything went back to normal. However, I hate sense and I would like something without it which is what the dev version provides, but if I cannot get wifi working then it's kind of useless. When I say "if I cannot get wifi working" what I am indicating is that when I try to run the cleanrom dev version 1.4 WIFI gets stuck on "turning on" but never turns on and eventually just says "error" with no further details. I searched through forum feeds and found a few forums that hinted on steps, but many people have seemed to be confused by this issue in the past and perhaps it is related to firmware as you said.
Thanks
i would wipe everything again, reflash the rom, and then immediately the patch. that should fix everything. key thing is flash the patch before booting the rom. ive flashed the patch after rebooting before and had things go haywire. not a promise that it will work, just letting you know what ive run into
Scosler has everything listed in the op for the rom, and all files are there as well. There's a bunch of different instructions for however your phone is set up.
Sent from my Rezound
Continuing...
Hi,
Not to sound like a total idiot here, and I probably do, but you had mentioned I should update the firmware so that hboot indicates 2.21 or higher. Is there an easy process for this or a thread I can turn to so that I can be sure it's updated. I believe I already did the step you mentioned.
I wiped/reset ----> flashed the 1.4 rom ----> ran the PH98IMG.zip----> then boot ----> then no PROFIT. wifi will not work. Maybe it's firmware after all. I don't know how I ended up on gb, I had a friend walk me through this the first time and I'm pretty technical. I used the automated tool by that one guy to flash the amonra recovery and I thought that was 2.21 or higher, but maybe I'm wrong.
If s on and on 2.11 hboot Method 4:
-Copy ROM to SD Card AND PH98IMG.zip AND GB Firmware Patch to ROOT of SD Card
-Reboot to recovery
-wipe data / Factory Reset
-Flash ROM
-Flash GB Fimrware Patch
-Use Developer Menu to reboot to bootloader and flash the boot.img file in the PH98IMG.zip
-Reboot
-Profit!
Based on what you typed you didn't flash the firmware fix...
Mr. Lando said:
Hi,
Not to sound like a total idiot here, and I probably do, but you had mentioned I should update the firmware so that hboot indicates 2.21 or higher. Is there an easy process for this or a thread I can turn to so that I can be sure it's updated. I believe I already did the step you mentioned.
I wiped/reset ----> flashed the 1.4 rom ----> ran the PH98IMG.zip----> then boot ----> then no PROFIT. wifi will not work. Maybe it's firmware after all. I don't know how I ended up on gb, I had a friend walk me through this the first time and I'm pretty technical. I used the automated tool by that one guy to flash the amonra recovery and I thought that was 2.21 or higher, but maybe I'm wrong.
Click to expand...
Click to collapse
If i were you i would either s-off or flash one of the ics leak ruu's. that will help. there are many ways to solve your problem but those are your best bets
My issue is resolved. Thanks for all of your help and insight.
Sent from my ADR6425LVW using XDA
Care to share what you did? I am having exact same issue . . .
nvm - resolved: applied GB Patch right after ICS ROM flash (who would have known - I was kind of ignoring those GB patch instructions, since they did not apply to ICS).
I just rooted my new HTC EVO LTE phone recently because I had to get a new one. Any way, after rooting it, I imminently made a nandroid back up. Then I flashed a few different roms and recoverys. However, what I found out is after I flash a new rom, my wifi says error and won't turn on. I'm not sure what the problem is. And yes, I cleared everything out before flashing a new rom. However, what is even more interesting is I can use my recovery that I made after rooting my phone to go back to the stock rom and it has no trouble with the wifi. I'm not sure why I'm getting this error or how to fix it.
I've thought about flashing some new radios, but I've had issues in the past with this phone trying to make it S-Off, so as a result it is currently S-On. I would like it to be S-off, but after having a lot of experience with it, I've learned it is very time consuming to do and it is a pain to get it to work, it almost always bricks my phone and then I have to go unbrick it in Linux.
I'm planning on running through the rooting method again to see if that does anything, but I'm doubtful. I've also tried updating the prl, profile, firmware and HTC software with no luck. Let me know if anyone has any suggestions. Thanks.
NoClemency said:
I just rooted my new HTC EVO LTE phone recently because I had to get a new one. Any way, after rooting it, I imminently made a nandroid back up. Then I flashed a few different roms and recoverys. However, what I found out is after I flash a new rom, my wifi says error and won't turn on. I'm not sure what the problem is. And yes, I cleared everything out before flashing a new rom. However, what is even more interesting is I can use my recovery that I made after rooting my phone to go back to the stock rom and it has no trouble with the wifi. I'm not sure why I'm getting this error or how to fix it.
I've thought about flashing some new radios, but I've had issues in the past with this phone trying to make it S-Off, so as a result it is currently S-On. I would like it to be S-off, but after having a lot of experience with it, I've learned it is very time consuming to do and it is a pain to get it to work, it almost always bricks my phone and then I have to go unbrick it in Linux.
I'm planning on running through the rooting method again to see if that does anything, but I'm doubtful. I've also tried updating the prl, profile, firmware and HTC software with no luck. Let me know if anyone has any suggestions. Thanks.
Click to expand...
Click to collapse
S-OFF is really the way to go if it's still an option for you it's the only way to get the new firmware without relocking and taking the OTA then unlocking and rooting again read post 2 in the lazypanda thread found here http://forum.xda-developers.com/showthread.php?t=1737123 just go down the list and verify everything works before running lazypanda there are plenty of members that subscribe to that thread so there is plenty of help availiable
Also, rerooting won't do anything. You're already rooted? Think the problem is in the rom u installed. Possibly a bad download. Try downloading from a good connection and install it again. If it is close to stock like flex's stock w goodies just clear cache and dalvik in recovery.
And what do u mean u tried a few recoveries? Cwm doesnt work well with the evo LTE. Try twrp 2.2 and leave it alone until its updated again.
What is your hboot? What rom did you try flashing?
Sent from my lair.
Im also getting this issue and i know its not anything to do with rooting and all that since ive been rooted since i picked this up from best buy on preorder release day and ive been flashing and running the same rom and mods forever now also i was using wifi yesterday soooo yea lol
Recognized Hooker Killer
First, I don't believe I can make my phone S-off, because it has software version 2.13.651.1 710Rd on it and even though I do have a nandroid back on 1.13 hboot, for the default rom from a long time ago with my old HTC EVO LTE, I can't flash back a hboot to 1.13 so I believe I'm stuck S-On for now. Let me know if I'm wrong.
I've attempted several different roms including fresh rom 5.1.1, viper4G_1.0.0, and a jelly bean rom (cm-cfX-20120904-OFFICIAL-jewel all with the same problem. As for recoverys, I should have said I've tried restoring back to several different nandroid backups that I created in the past that were working just find with my old HTC EVO LTE.
Right now my phone is unlocked and rooted. I am running H Boot-1.19.000, I am S-On, and Radio-1.12.11.0809.
I know this problem has something to do with flashing new roms, because when I do a nandroid back up to the default rom, I don't have this problem, and the wifi is working great, I only have this problem if I try to flash any custom rom or use a nandroid backup that I made with my old HTC EVO LTE.
Again, this is not my first time around the track with an HTC EVO LTE, this just happens to be a new phone that I recently got from Sprint when they were thinking my dropped calls were caused by my phone when in fact they figured out they had a tower down. Since then, the tower is back up, so that is why I just rooted this new phone they gave me.
Let me know if you have any suggestions or if you need anymore information.
It's been while now, and I haven't gotten a real response back yet, and I was wondering if anyone knows anything that will help me out? Thanks.
Edit: Found out that I simply needed to flash the boot.img manually of what ever custom rom that I want to switch to in order to get around being S-On.
Please Help
NoClemency said:
It's been while now, and I haven't gotten a real response back yet, and I was wondering if anyone knows anything that will help me out? Thanks.
Edit: Found out that I simply needed to flash the boot.img manually of what ever custom rom that I want to switch to in order to get around being S-On.
Click to expand...
Click to collapse
Hey im having the same exact issue I however went back to my stock backup from right after I rooted. The issue I had was I flashed a CMX nightly. I had been running them fine and suddenly everything went haywire i was bootlooping but only after about 30 seconds after the rom would load up. I'd have just under a minute to fish around and the it would reboot again. it was in this short window that I saw the wifi error and that it would not connect to the sprint network at all for voice or data. Im S-On Hboot 1.15 Evo LTE. I used Flash GUI to go from Stock sense to CMX as im sure youve figured out you have to do. Since i had backups of previous CMX nightlies I tried to just restore But none of my nandroids would fix the looping issue I managed to flash the boot img from the CMX rom i was previously on through adb/fastboot and it took but still my device kept looping. Finally i found this http://forum.xda-developers.com/showthread.php?t=1917106 but I didn't have any Sense Based Roms only my Stock Nandroid back up. So i used the Boot Image Flasher Tool, it took, then Instead of rebooting the system I went straight to my custom recovery and restored my Stock Sense BackUp since the tool flashes the stock sense kernel. To my relief the phone booted right up no problem connected to the network and all but to my dissmay the wifi is STILL broken somehow it says error and will not switch on. Everything else seems to be working fine though. This is crucial there is no way I can go without wifi on my phone. I don't want to ruin anything further or permanitely but i do plan to move forward. My plan is to download a sense rom (MeanRom) which im doing now but it's taking forever on 3G. Wipe everything (using TWRP 2.2) Data Dav rom and use super wipe, and try to install MeanRom. If anyone has any other suggestions Im all ears. Also im alittle confused on the Hboot kernel limitations I know I have to use Flash GUI if Im going from a sense Rom to Aosp and vise versa but do I have to use it when say Going to a nandroid backup of a sense rom while currently on a Aosp rom because I couldnt find a boot.img file in my backup file when i used the tool to extract it. I hate S-On HTC really screwed us with this. And I hate my original evo which had S-Off for dying on me on the 15th day and me having to get this replacement with 1.15 im sorry guys I love this phone but it has become a nightmare and the Evo 3D was no walk in the park either. I apprectiate any comment from anyone this is the first time in almost 8 years of hacking I've been truely worried I may not be able to fix something.
Try this....had the same problem during one of my flashing sessions from rom to rom...this fixed it for me.
You also might want to try a different rom with its corresponding boot img. I'm currently running Venom rom with its boot img file and its working great. Right now, it sounds like your kernel is what is giving you problems like mine, so flashing the correct boot img should fix it.
vel7wil said:
Try this....had the same problem during one of my flashing sessions from rom to rom...this fixed it for me.
Click to expand...
Click to collapse
Thank you I'll be sure to try this out quick update, in TWRP recovery I had (force MD5 check on all zips?) checked now I don't remember checking it or if it came checked by default but as soon as I unchecked it I was able to run superwipe and flash MeanRom which both failed multiple times when it was checked on. Not sure if this was the cause of my problem but I agree I think I got a bad kernel in the CMX nightly. Either that or the Flash GUI app didnt exract the boot image properly. Either way I haven't been brave enough to try another AOSP rom man I hate having S-On my first Evo was perfect then I get stuck with this locked down replacement. One question though is that boot image for a stock/sense rom just wanna be sure.
vel7wil's advice worked for me I was having the same issue. Download the zip he recommends. Use flash image gui to flash the kernel and clear dalvik and cache. I just did a standard reboot after that and it said "android updating... apps x of xx" then everything was back to working.
I used Hansoons all in 1 toolkit to root my rezound, I unlocked the bootloader, loaded the twrp recovery and flashed supersu. Now when my phone boots all I get is the bar across the top with the signal strength, battery level, and time. What can I do to get my phone to function again??
I had previously unlocked with the toolkit and ran a few root apps and removed some blotware. I then relocked and everything was working fine until I tried to root it again.
Are you s-on then?
Did you RUU first? Might want to do that since you had made changes before. That will bring you back to nice and fresh stock.
The latest one is here:
http://www.androidpolice.com/2012/0...ull-ruu-build-4-03-605-2-for-the-htc-rezound/
IF YOU ARE S-ON... you can relock, RUU and then flash the recovery again and get root and see if that helps.
If you are s-off then await someone else's answer, but I think you run the RUU without relocking.
Ya, s-on. That looks like what I need to do, just wasn't sure what to call the process and search for... Unfortunately with my 4g internet via my phone gone, I gotta sit here and wait on the download to complete on my slower internet. Greatly appreciate the fast response!!!!
disdard said:
Ya, s-on. That looks like what I need to do, just wasn't sure what to call the process and search for... Unfortunately with my 4g internet via my phone gone, I gotta sit here and wait on the download to complete on my slower internet. Greatly appreciate the fast response!!!!
Click to expand...
Click to collapse
The answer isn't always RUU. Running an RUU will reverse everything that you just did. You will lose root. You're phone will be wiped. And you'll have to relock. What I recommend trying first is rebooting into recovery. Twrp in this case for you. You can do this by getting into bootloader (power and volume down on boot up) and hitting recovery. Once in recovery try wiping cache and dalvik. Reboot. If that fixes it... Cool. If not.. reboot into recovery again and wipe data. This time it should almost certainly work. You won't have root. But you will be stock.
Flashing a custom ROM will fix your problem as well.
There is almost nothing that you can screw up to the point of HAVING to RUU. Most people only use an RUU to update firmware and radios when new versions are released
Sent from my ADR6425LVW using Tapatalk 2
GetRipped said:
The answer isn't always RUU. Running an RUU will reverse everything that you just did. You will lose root. You're phone will be wiped. And you'll have to relock. What I recommend trying first is rebooting into recovery. Twrp in this case for you. You can do this by getting into bootloader (power and volume down on boot up) and hitting recovery. Once in recovery try wiping cache and dalvik. Reboot. If that fixes it... Cool. If not.. reboot into recovery again and wipe data. This time it should almost certainly work. You won't have root. But you will be stock.
Flashing a custom ROM will fix your problem as well.
There is almost nothing that you can screw up to the point of HAVING to RUU. Most people only use an RUU to update firmware and radios when new versions are released
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Well it's not like one should avoid RUU like the plague, geez.
As to wiping your phone, flashing a custom ROM can/will do that as well. Relocking and unlocking again are really no big deal, just a couple commands. Rerooting is simple. It's really not as bad as you make it out to be, imo. And in fact, there's a ton of threads suggesting running an RUU to solve issues and get a fresh start.
I like to run an RUU since it brings you back to a nice fresh stock install, and yes, it will update if the phone is not up to date. In this case to global, which is a bonus.
feralicious said:
Well it's not like one should avoid RUU like the plague, geez.
As to wiping your phone, flashing a custom ROM can/will do that as well. Relocking and unlocking again are really no big deal, just a couple commands. Rerooting is simple. It's really not as bad as you make it out to be, imo. And in fact, there's a ton of threads suggesting running an RUU to solve issues and get a fresh start.
I like to run an RUU since it brings you back to a nice fresh stock install, and yes, it will update if the phone is not up to date. In this case to global, which is a bonus.
Click to expand...
Click to collapse
Oh hai there.:angel:
disdard said:
I used Hansoons all in 1 toolkit to root my rezound, I unlocked the bootloader, loaded the twrp recovery and flashed supersu. Now when my phone boots all I get is the bar across the top with the signal strength, battery level, and time. What can I do to get my phone to function again??
I had previously unlocked with the toolkit and ran a few root apps and removed some blotware. I then relocked and everything was working fine until I tried to root it again.
Click to expand...
Click to collapse
It sounds like you just need a new launcher. If you're getting to that point are you able to pull it down and see the notification area?
If yes then you could use Droid Explorer to push another launcher to the phone.
If not, yeah you maybe looking at starting over. Have you tried using a different recovery? I know personally I've had issues with every launcher except for Amon Ra.
I ran RUU, and once reset to stock breezed through the process of rerooting. Unfortunately had that done before any of the other replies, because it would have been easier to just do the resetting. But I got into the mess while trying to straighten out the issue of my dialer and people app disappearing so just fully going back to stock ensured I got the entire mission accomplished. And at the point it would boot to, you couldn't pull up the notification window so a new launcher wouldn't have fixed it.
Atleast I learned a bunch through the process!!! Just getting into rooting and customization, took the first step and rooted and kinda figured out how things work. Once I figure out a little more and decide which ROM I want to try, I'd like to try a custom ROM. All stuff I'm familiar doing with computers just gotta figure out exactly how it all works on phones....
Glad you are back up and running! Sorry if my method was more involved/time consuming.
I would suggest that before you flash a custom ROM you make a nandroid of your stock set up. Then you can always flash back to that if you don't like the ROM or run into issues and avoid troubleshooting or RUUing just to fix something.
It's a good safety net and a good habit to always have a nandroid to go back to in case of issues. I usually keep one handy of stock and of any ROMs I like, and always make one before flashing a new ROM or even a theme for a ROM.
As the title says, I'd like to flash Ditto Note 3 ROM v5.2. I am currently running Alliance ROM build 26 with TWRP 2.7.2.0.
What I'm looking for is a basic step-by-step (I feel pretty confident about finding detailed breakdowns of each step so please don't put yourself out too much--I'll follow up if there's anything I don't understand) so that there's nothing I miss, leaving me with a bricked phone, a locked bootloader that I can't revert, or non-functional radio/modem/anything.
I'm fine with ODIN, flashing, recovery, and other basics. I'm really just looking for each step that is ABSOLUTELY REQUIRED in order to not run into the problems mentioned above. I'd like to be able to get back to where I'm at now in case I decide I don't care for DN3. Thank you in advance.
I've attached a screenshot of "About Phone" in case the info helps.
I've also never taken an OTA or used an OFFICIAL stock ROM except for the one it came with, I rooted and unlocked as soon as it was possible after day one of release with no updates/upgrades prior (pre-ordered from Verizon, first ROM was BeansTown build 1 ).
Is what I'm asking possible? Can this be done without relocking the bootloader?
Applejackson said:
As the title says, I'd like to flash Ditto Note 3 ROM v5.2. I am currently running Alliance ROM build 26 with TWRP 2.7.2.0.
What I'm looking for is a basic step-by-step (I feel pretty confident about finding detailed breakdowns of each step so please don't put yourself out too much--I'll follow up if there's anything I don't understand) so that there's nothing I miss, leaving me with a bricked phone, a locked bootloader that I can't revert, or non-functional radio/modem/anything.
I'm fine with ODIN, flashing, recovery, and other basics. I'm really just looking for each step that is ABSOLUTELY REQUIRED in order to not run into the problems mentioned above. I'd like to be able to get back to where I'm at now in case I decide I don't care for DN3. Thank you in advance.
I've attached a screenshot of "About Phone" in case the info helps.
I've also never taken an OTA or used an OFFICIAL stock ROM except for the one it came with, I rooted and unlocked as soon as it was possible after day one of release with no updates/upgrades prior (pre-ordered from Verizon, first ROM was BeansTown build 1 ).
Is what I'm asking possible? Can this be done without relocking the bootloader?
Click to expand...
Click to collapse
Since you are already using Alliance B26 (an MJ9 based ROM), you shouldn't need to use ODIN for anything.
I simply followed the instructions in the DN3 post, and I was up and running w/o issues.
I'm not sure about TWRP, bc I used the latest version of Philz myself, and had no issues. I've heard of some people not having issues with TWRP, and others who did. Seems like YMMV, based on all the posts I've gone through in that thread (you should go through it yourself and get an idea).
Also, I am having the odd lockup every so often with this ROM (I believe it is deep sleep based), which a few others are also experiencing. Outside of that, I love the ROM too.
Thanks for the reply.
devious_z said:
Since you are already using Alliance B26 (an MJ9 based ROM), you shouldn't need to use ODIN for anything.
I simply followed the instructions in the DN3 post, and I was up and running w/o issues.
I'm not sure about TWRP, bc I used the latest version of Philz myself, and had no issues. I've heard of some people not having issues with TWRP, and others who did. Seems like YMMV, based on all the posts I've gone through in that thread (you should go through it yourself and get an idea).
Also, I am having the odd lockup every so often with this ROM (I believe it is deep sleep based), which a few others are also experiencing. Outside of that, I love the ROM too.
Click to expand...
Click to collapse
Thanks for taking the time. I guess my main concern was with the bootloader and whether or not I had to upgrade it and possibly lock it accidentally, or if I could just stay with the bootloader I have now, which is actually VRUEMJB. Used the method outlined in the AllianceRom thread for flashing the ROM. Since I still have a virgin bootloader I didn't want to lock it. I think I'll just try flashing the ROM as I have it, after a wipe of course, and I can always flash a recovery backup if need be.
I did try looking through the info in the threads for the ROM, but there are thousands of pages on the original and 90+ in the [**UPDATED] Verizon DN3 thread. The ones that I have read through have some conflicting information, so this query is really just to eliminate any confusion on my part before changing anything I can't change back.
Update: Tried and failed.
Just an update, I tried with my current configuration as I said I would above. Factory Reset, Data Format, the whole nine yards, and everything seems to go smoothly until the final reboot after everything is installed. The phone just hangs on the Samsung boot image and never goes any further. Tried reinstalling twice after but always the same problem. I was able to flash my previous backup no problem, so no damage, but no joy either. Any ideas?
Applejackson said:
Just an update, I tried with my current configuration as I said I would above. Factory Reset, Data Format, the whole nine yards, and everything seems to go smoothly until the final reboot after everything is installed. The phone just hangs on the Samsung boot image and never goes any further. Tried reinstalling twice after but always the same problem. I was able to flash my previous backup no problem, so no damage, but no joy either. Any ideas?
Click to expand...
Click to collapse
I guess I would start with reinstalling the MJ9 firmware through odin, and then try the rom again. You mentioned you were actually on MJB earlier which doesn't sound right.
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
You should get it. But if any system files are changed by root, the OTA will not install. Otherwise, you should be good to go.
BTW, the Dev Edition 4.4.3 ROM is already posted in Development.
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
noobsquared said:
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
Click to expand...
Click to collapse
He probably made a nandroid backup of his stock rom so that he could always go back to stock in cases like this.
You could technically use someone else stock nandroid as well just as long as all the numbers match up. I believe there was a thread here on that.
---------- Post added at 02:13 AM ---------- Previous post was at 02:08 AM ----------
iArtisan said:
Some news sites are saying AT&T will push it mid August.
In preparation, I've already returned to the stock 4.4.2 ROM and have flashed stock recovery. I'm still rooted, however. Will I still get the OTA update when it is released?
Click to expand...
Click to collapse
Make sure you restore all the bloatware as well or it won't update. I found this out with the last update. I would hold off on the update until you know it's safe to proceed without losing root unless you want to confirm it first for us. [emoji16]
noobsquared said:
What ROM were you running and how did you get back to stock? I'm stuck on ARHD 10.1 and can't get back to stock
Click to expand...
Click to collapse
What do you mean when you say you "can't get back to stock". What did you try and what was the result?
You can just flash a stock rooted ROM, a stock nandroid (as previously suggested) or run the 1.58 RUU.
volcalstone said:
He probably made a nandroid backup of his stock rom so that he could always go back to stock in cases like this.
You could technically use someone else stock nandroid as well just as long as all the numbers match up. I believe there was a thread here on that.
Click to expand...
Click to collapse
redpoint73 said:
What do you mean when you say you "can't get back to stock". What did you try and what was the result?
You can just flash a stock rooted ROM, a stock nandroid (as previously suggested) or run the 1.58 RUU.
Click to expand...
Click to collapse
I got this nandroid (1.12.502.18 - TWRP 2.6.3.3 Thanks to Wonders_Never_Cease) from http://forum.xda-developers.com/showthread.php?t=2701376 and tried to restore, it ends abruptly leaving wifi and boot screen broken. Phone still boots in ARHD 10.1 but doesn' work perfectly. I put the folder from rar file under TWRP Backup folder and it picked up fine but won't restore. Maybe because I have TWRP 2.7.1.0?
I just picked up the phone and it is S-ON with bootloader unlocked/tempered. I'm trying to get back to stock till we have RUU to convert it to DE eventually like the M7.
I was not able to download the RUU EXE file since it keeps ending abruptly like others suggested. I also tried the HBOOT no PC required version of RUU but it would end abruptly at parsing. Maybe because I'm S-ON? I checked the MID and CID, they are both AT&T stock.
Try flashing a stock rooted ROM from my Index (under CUSTOM ROMs): http://forum.xda-developers.com/showthread.php?t=2751432
noobsquared said:
I was not able to download the RUU EXE file since it keeps ending abruptly like others suggested.
Click to expand...
Click to collapse
I know lots of folks have been having this problem. One guy was going to post a mirror of the RUU, so you might see if he got around to that.
But honestly, the OTA isn't rolling out yet, so why bother at this point? I would just reflash Viper and get your phone fully working again and worry about the OTA later.
And why bother with the OTA at all, or wait for it to roll out? There are already 4.4.3 custom ROMs available. And there is also an AT&T version specific ROM based on the 4.4.4 Dev Edition RUU: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The AT&T "official" OTA will probably have little if anything different from the DE ROM, aside from all of AT&T's crappy bloatware apps.
redpoint73 said:
Try flashing a stock rooted ROM from my Index (under CUSTOM ROMs): http://forum.xda-developers.com/showthread.php?t=2751432
I know lots of folks have been having this problem. One guy was going to post a mirror of the RUU, so you might see if he got around to that.
But honestly, the OTA isn't rolling out yet, so why bother at this point? I would just reflash Viper and get your phone fully working again and worry about the OTA later.
And why bother with the OTA at all, or wait for it to roll out? There are already 4.4.3 custom ROMs available. And there is also an AT&T version specific ROM based on the 4.4.4 Dev Edition RUU: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
The AT&T "official" OTA will probably have little if anything different from the DE ROM, aside from all of AT&T's crappy bloatware apps.
Click to expand...
Click to collapse
Thanks for the links and everything man but the whole reason I'm trying to go back to completely stock is that I feel there is something wrong with my phone or maybe this is normal for M8. When I flash ARHD 10.1 and click on finish installation, screen gets back to TWRP but then it goes dark for around 2 minutes. I thought it was dead but it finally lit back up and let me restart the phone. Tap on restart and it took a minute. First boot took well over 5 minutes. Been working fine since but I'm not sure why it sometime just sits there with screen off and pimps on it's own. I may try the full AT&T 4.4.3 ROM since it's very close to stock. If I update firmware, can I not go back to stock nandroid? Which I can't anyways but just wondering.
noobsquared said:
When I flash ARHD 10.1 and click on finish installation, screen gets back to TWRP but then it goes dark for around 2 minutes. I thought it was dead but it finally lit back up and let me restart the phone.
Click to expand...
Click to collapse
So after the ROM fully installs (progress bar fills up) and you click "Finish" in AROMA, the screen goes blank for 2 minutes? I haven't seen that. But it might be a ARDH anomaly (I've never flashed it).
noobsquared said:
First boot took well over 5 minutes.
Click to expand...
Click to collapse
Totally normal on the first boot after any ROM flash.
noobsquared said:
Been working fine since but I'm not sure why it sometime just sits there with screen off and pimps on it's own.
Click to expand...
Click to collapse
Ummm, not sure what is being said here "pimp on it's own". I'm guessing a typo or darned auto correct!
noobsquared said:
If I update firmware, can I not go back to stock nandroid? Which I can't anyways but just wondering.
Click to expand...
Click to collapse
I would highly recommend updating firmware if anything is acting buggy on a 2.22 base ROM.
You should be able to restore a nandroid fine with updated firmware. Only thing, is if the nandroid was based on a 1.XX ROM and doesn't play well with the new firmware, you may need to downgrade the firmware.
But honestly, things tend to be always moving forward firmware-wise. It won't be long until all custom ROMs are based on 2.XX, and the 1.XX base wil become obsolete; with most folks being on the newer firmware and few (if any) reasons to go back or be on old firmware.
redpoint73 said:
So after the ROM fully installs (progress bar fills up) and you click "Finish" in AROMA, the screen goes blank for 2 minutes? I haven't seen that. But it might be a ARDH anomaly (I've never flashed it).
I would highly recommend updating firmware if anything is acting buggy on a 2.22 base ROM.
You should be able to restore a nandroid fine with updated firmware. Only thing, is if the nandroid was based on a 1.XX ROM and doesn't play well with the new firmware, you may need to downgrade the firmware.
But honestly, things tend to be always moving forward firmware-wise. It won't be long until all custom ROMs are based on 2.XX, and the 1.XX base wil become obsolete; with most folks being on the newer firmware and few (if any) reasons to go back or be on old firmware.
Click to expand...
Click to collapse
Yes, once the rom is installed, it exits out to TWRP, I get a flash of TWRP screen and then it goes dark. I press power button and wait for 2 minutes for it to come back on. I'm tempted to just convert it to Dev Edition but with all the issues people are having with phones these days, I want to make sure I can get it fixed under warranty or something if hardware craps out.
I am not even able to restore the nandroid for AT&T at this point. TWRP starts restoring nandroid and then goes back to TWRP main screen and the ARHD rom becomes very buggy (wifi won't turn on, gets super slow, developer warning on boot screen goes away, etc.)
I will try to update the firmware and try to get on that AT&T Rom bandwagon to see how it goes. Thanks for all your help and input. I wish it wasn't so complicated with M8. M7 was so easy to mess with or maybe I got used to that lol
noobsquared said:
I am not even able to restore the nandroid for AT&T at this point. TWRP starts restoring nandroid and then goes back to TWRP main screen and the ARHD rom becomes very buggy (wifi won't turn on, gets super slow, developer warning on boot screen goes away, etc.)
Click to expand...
Click to collapse
After a aborted TWRP restore, I'm actually surprised to see the formerly installed ROM (I think that is what you are saying) to boot at all. Wipe and reflash ARHD.
Broken WiFi is a known issue with the 2.22 based ROMs + outdated firmware. Not sure about the other issues, but updating the firmware and reflashing ARHD might do the trick.
noobsquared said:
Yes, once the rom is installed, it exits out to TWRP, I get a flash of TWRP screen and then it goes dark. I press power button and wait for 2 minutes for it to come back on.
Click to expand...
Click to collapse
That's odd. Did this only happen once, or can your reproduce this bug? Any mention of this on the ARHD thread?
You might also try to wipe cache and re-install TWRP. Could just be a bad TWRP install.
noobsquared said:
I'm tempted to just convert it to Dev Edition but with all the issues people are having with phones these days, I want to make sure I can get it fixed under warranty or something if hardware craps out.
Click to expand...
Click to collapse
FYI, as long as you are a current account holder, AT&T doesn't give a darn what you change in software, they will still honor the warranty if there is a hardware issue.
redpoint73 said:
After a aborted TWRP restore, I'm actually surprised to see the formerly installed ROM (I think that is what you are saying) to boot at all. Wipe and reflash ARHD.
Broken WiFi is a known issue with the 2.22 based ROMs + outdated firmware. Not sure about the other issues, but updating the firmware and reflashing ARHD might do the trick.
That's odd. Did this only happen once, or can your reproduce this bug? Any mention of this on the ARHD thread?
You might also try to wipe cache and re-install TWRP. Could just be a bad TWRP install.
Click to expand...
Click to collapse
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
noobsquared said:
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
Click to expand...
Click to collapse
Just an FYI- the black screen is a common problem with aroma installers and is well known.. All the other issues? I haven't a clue.
Hello!
I'm using 2.22 WWE version stock rom with 4.4.3, but I have long boots of device with old AT&T firmware.
Is there any way to update firmware?
I'm s-on, and firewater doesn't works.
noobsquared said:
Thanks for the information on hardware warranty. I hope it never comes to that.
I actually installed ARHD twice or 3 times last night since every attempt to go back to AT&T stock failed and I had a half working jacked up device. I went in TWRP, re-installed ARHD and everything was good to go. Every time I installed the ROM, I had to wait a couple minutes to hit reboot after ROM installation since TWRP would take a nap. I'm not too worried about it since everything seems to be working fine but it's still kinda bothersome, you know?
At this point in time, everything is running well on ARHD 10.1 so I guess I will take a chill pill.
Thanks once again for all your help
Click to expand...
Click to collapse
OP here.
The black screen you're getting is due to TWRP timing out. You can turn that off in the settings. This is a non-issue though and nothing to worry about.
The long boot times, however, is a problem. This is happening because you're on the old AT&T firmware. Unfortunately, there's no way to flash the latest firmware without S-OFF. Your only option is to return to stock and wait for the official 4.4.3 OTA. Flash a nandroid backup (I'll send you a link to the one I used later, or just search around for the master list here.) through TWRP and then flash stock recovery through fastboot. Let me know if you need detailed instructions on how to do this.
Thanks guys for all the help and support. I messed with the phone quite a bit and tried quite a few things and all the posts here help me learn a lot too. I was able to go all stock after s-off using that RUU method. I tried a couple other roms and finally back to dev edition stock for now. Was able to convert completely to stock with all the info and so far so good.
Once again, thanks a bunch everyone
Sent from my HTC One_M8 using XDA Free mobile app
iArtisan said:
OP here.
The black screen you're getting is due to TWRP timing out. You can turn that off in the settings. This is a non-issue though and nothing to worry about.
The long boot times, however, is a problem. This is happening because you're on the old AT&T firmware. Unfortunately, there's no way to flash the latest firmware without S-OFF. Your only option is to return to stock and wait for the official 4.4.3 OTA. Flash a nandroid backup (I'll send you a link to the one I used later, or just search around for the master list here.) through TWRP and then flash stock recovery through fastboot. Let me know if you need detailed instructions on how to do this.
Click to expand...
Click to collapse
I bit the bullet and just paid $25 for SunShine so I could get S-OFF and update the firmware
http://forum.xda-developers.com/showthread.php?t=2792487
cachookaman said:
I bit the bullet and just paid $25 for SunShine so I could get S-OFF and update the firmware
http://forum.xda-developers.com/showthread.php?t=2792487
Click to expand...
Click to collapse
I had to do the same thing but given that what a pain it is without s-off, I'm not complaining. $25 is a small fee to pay for the peace of mind that you ha e almost full control of the device now.
Sent from my HTC One_M8 using XDA Free mobile app