[Q] Help a poor soft bricked S2 out? - Galaxy S II Q&A, Help & Troubleshooting

So a few days ago my galaxy s2 shut it self off and wouldn't start again. Wouldn't charge the battery, just sat there with the empty battery symbol. I by passed the battery and directly wired a cut usb cord onto the battery terminals. It worked! But now wont boot past the "Samsung Galaxy s2" white on black logo screen. I have reflashed the PDF, PHONE, and CSC though odin with 10 different files I found around these forms and across the internet. Nothing made any difference and it still sticks on the logo screen. Anything else I could try before sending it away? :/

---

Also I never installed any custom ROM or firmware on it, it was totally stock. I am also with Bell in Canada if that helps.

---

If you've already tried flashing stock firmware via Odin, probably not. Does it successfully flash in Odin, I.E do you get the green pass box & the phone auto reboot ? If not, copy/paste (or type) the details from the 'message' section in Odin when it's doing the flash here.

---

Yep every time I have done it it has said passed and my phone has restarted.
I followed this thread,
http://forum.xda-developers.com/showthread.php?t=1457458,
And did everything including flashing the bootloader, except using the .pit and re-partitioning because I'm afraid I will hard brick it, but it still had the same result. Won't boot past logo and wont go into recovery only download.

---

Why did you flash the bootloader ? You don't normally do that save for very specific situations.
OK. So you followed that guide using files from Samfirmware. I have absolutely no idea about files from that site or how they work/what to do with them as I've flashed anything from that site & doubt I would.
Given you can still get into download mode, only thing I can suggest is to download a stock rom from Intratech's thread from here & flash in PDA section of Odin if links work, if not, download stock firmware for your carrier/country with the PC version of Checkfus & flash that in the PDA section of Odin. In both cases, only one file and no mucking around.

---

I flashed the bootloader because that very official looking guide told me to lol
"Have you done everything correctly until now? Then...
Congratulations on recovering your phone!
You deserve some cake afterwards, and some rest
Now, if your problem is the NAND rw coruption, and wasn't fixed by the above fix, then follow these steps :
5) Download the Kernel. Flash it in PDA. Without ticking Re-Partitioning
6) Successful? Nice, hope is still present.
7) Flash the recovery package, following steps 1-4 This should fix your issue. If it does not, then :
WARNING : FLASHING A BOOTLOADER IS DANGEROUS. FLASH WITH EXTREME CAUTION.
8) Download the Bootloader. Flash it as PDA or Bootloader in ODIN. Without ticking Re-Partitioning
9) Flash the Kernel, as in step 5
10) Flash the recovery package, like in steps 1-4 And that will fix any of your issues
I hope that this guide was helpful, and if it was, hit the thanks button! "
Because my phone did not get bricked by trying to use custom ROM I feel its different then everyone else's problems here. Maybe its a bad app, is there a way to hard wipe my phone from where I am? Thanks very much for responding btw.

---

Guides don't necessarily work the way they're supposed to is all I'll say.
No, your problem is not different to every other case like this we see here maybe 20 times a week. A bad flash/not being able to get into recovery/can get into download mode is a bad flash/not being able to get into recovery/can get into download mod.
You're not going to wipe it without getting into recovery. You could try and flash a rooted kernel that has recovery (CFRoot ?), but frankly best advice I can give you is to do what I suggested in my last post.
You're welcome

---

Ok I got check fus and found the firmware for my phone. I'l try using it to flash in ODIN but it does't seem like it will be any different then the other 10 firmwares I have tried

---

When you flash it, make sure you're plugged into a powered/mainboard USB port on your PC, make sure Kies/it's processes aren't running in Windoze Task Manager (if they are, kill them. You need the drivers that come with Kies to use Odin, but they mess with each other if they're running @ the same time), ensure you're running Odin as admin, and use the USB cable which came with the phone if you have it.

---

I did exactly what you said, still stuck in bootloop.

---

OptifishPrime said:
I did exactly what you said, still stuck in bootloop.
Click to expand...
Click to collapse
And still can't get into recovery? Usually a full wipe will alleviate a boot loop.

---

If you're now in boot loop, the ROM is corrupted, think of it as a Windows loading forver. Just push a new ROM compatible to your device, I recommend stock for now, and see if it will boot normally.
I only experience boot loop once during my CM 7 installation, I reinstalled the ROM and everything works perfectly.

---

OptifishPrime said:
I did exactly what you said, still stuck in bootloop.
Click to expand...
Click to collapse
You obviously did not do what I said.
I said "If you did everything and it didn't work, proceed to flash the Kernel and/or the bl".
You did 't use the .PIT and re-partition. If you use it, it'll fix the phone.
Have you flashed the kernel?
Plus, you have a soft bricked phone, period. The only different thing from others is how it happened
Flash the kernel. And then the recovery package. Without the .PIT. If that doesn't work, use the .PIT.
Just a FYI : I once soft bricked my phone when flashing a stock ROM. So yeah, soft bricks happen with almost all ROMs that are messy.

---

I did flash the kernel and the recovery package. At this point I haven't voided the warranty and I'm scared the flashing the .pit will do so. But I guess if that's the only thing I haven't done and you say it will fix it I will. I should use the one from the recovery package right? It will work on my Bell Canada I9100M?

---

Are you able to enter recovery by pressing volume up + home + power?

---

Have a read of my Helper Post...

---

Happened to me yesterday. Follow this:
1. Get Siyah kernel in .tar and flash it through odin.
2. Enter recovery and go to mount. In there format /data, /system, /cache, format all. Reboot recovery.
3. Search for a wipe script in xda forum ex: sgs2 rom wipe or something like that. Put it in your phone and go to recovery and install it.
4. Boot in download mode and flash latest version of stock rom downloaded from sammobile.com
Thats how I soved mine. Good luck.
Sent from my GT-I9100 using xda app-developers app

---

Phistachio said:
You obviously did not do what I said.
I said "If you did everything and it didn't work, proceed to flash the Kernel and/or the bl".
You did 't use the .PIT and re-partition. If you use it, it'll fix the phone.
Have you flashed the kernel?
Plus, you have a soft bricked phone, period. The only different thing from others is how it happened
Flash the kernel. And then the recovery package. Without the .PIT. If that doesn't work, use the .PIT.
Just a FYI : I once soft bricked my phone when flashing a stock ROM. So yeah, soft bricks happen with almost all ROMs that are messy.
Click to expand...
Click to collapse
Let's save the pit file flash for last.
People see "PIT" and go like "oh, I gotta flash this".
They must think it's a magic file, or something.

---

gastonw said:
Let's save the pit file flash for last.
People see "PIT" and go like "oh, I gotta flash this".
They must think it's a magic file, or something.
Click to expand...
Click to collapse
Forgive me for barging in, but if am correct, flashing PIT files is needed only when u have messed up the partitions on ur device, right?
Would that happen if I flash another phone's firmware, like say an i9300?
"To err is human, to forgive is divine"
Sent from my SGS II

---

immortalneo said:
Forgive me for barging in, but if am correct, flashing PIT files is needed only when u have messed up the partitions on ur device, right?
Would that happen if I flash another phone's firmware, like say an i9300?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Yeah, corrupted nand and all.
The thing is that people just love flashing pit files, my guess is they think "new ROM, maybe it needs more room, besides I've unzipped the .rar and the pit file is there. Gotta flash that in order for the ROM to work".
And then.....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}