I just received this from Amazon...
http://www.amazon.com/gp/product/B005PR3IC0/ref=oh_o00_s00_i00_details
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
i thought about getting one for my bike also, but then for some reason i don't think i want my expensive phone getting crushed if i happen to fall over or hit something.
surprisingly that never went through my head with my iphone.
Trident offers a bike mount for their Kraken case, which should be released soon. I've used RAM mounts before, very very sturdy.
one028 said:
not sure if i like it...it seams secure, but i had a problem with it on a bike ride today and i think im going to send it back...anyone have a good one that they recomend?
Click to expand...
Click to collapse
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Plusses are it's waterproof and pretty bomb proof, so if I get caught in the rain or wreck, the phone should be safe. It'd really be nice to be able to interact with it though. I have to stop, pop the latches, open the lid...
The Note actually fits in it if I take off the phone case, but I don't think I'll be riding with it like that.
Anywho, if you want, I'll look up the exact things I got.
I don't think it's a good idea to mount a bike on the Note. It's not that big...
Sent from my SGH-I717R
khaytsus said:
I ride with my wifes old Aria in an Otterbox (REAL Otterbox) + standard 4 hole GPS mount motorcycle mount. It stays in place pretty well, but no way to interact with the phone, so I gotta leave the screen on, and the box isn't that clear, has some amount of frosting to it, although I haven't had any problems reading through it.
Anywho, if you want, I'll look up the exact things I got.
Click to expand...
Click to collapse
Do you have a link for the mount? (and the case)
Thanks
I got the Samsung Car Holder for the Note which holds it very securely . It seems to have the same ball connector. Maybe it would fit together with the handle holder instead of the Window thingy. Just a thought.
Sent from my GT-N7000 using xda premium
If you buy the trident kraken ams case there is a bike clip attatchment accessory you can buy seperately on the website! !
Sent from my SAMSUNG-SGH-I717 using xda premium
Those squeezable mounts suck. Sorry for your loss. I have used these, http://www.ebay.com/itm/Cycling-Bik...962477?pt=PDA_Accessories&hash=item3375756eed. From ebay, and Asia. But they have worked out. You can find different sellers for them.
uztnus said:
Do you have a link for the mount? (and the case)
Thanks
Click to expand...
Click to collapse
The note with a VERY THIN case will fit in this Otterbox. A normal silicon or TPU it wont' fit, or will just barely fit. And remember, you can't interact with the phone in the case! Although with a dremel, you could possibly have a pretty tough case that you could touch though, although it'd obviously be less bomb-proof and you'd have to do something for water resistance. As-is, it's almost bombproof and waterproof.
OtterBox 2000 Series WaterProof Case
http://www.amazon.com/OtterBox-2000-Series-WaterProof-Case/dp/B000EM2O2G
Arkon GN032-AMPS Bicycle and Motorcycle Mount with 4-AMPS Connection Compatible with RAM GPS Holders (Black)
http://www.amazon.com/Arkon-GN032-AMPS-Motorcycle-Connection-Compatible/dp/B003FMUP14
To attach I just templated the holes on the case with the mount, drilled. To maintain water resistance, I put a piece of an old intertube between the mount and the case, just a bit of silicone, and screwed down tight. I've dunked it in in the sink, nothing. The screws on the inside I put duct tape over just in case anything rubs, but I put together a piece of cut-up foam in there to secure the Aria I normally use in the case.
Related
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
nice find. please let us know how it works. i have a vzw tp2 as well and have been searching for a car holder. right now it sets on my passanger seat...
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
YodaJM said:
Just a quick question, why do you think squeeze cradles suck?
I've not had one but was considering a universal mount from Arkon, which is a squeeze cradle.
Click to expand...
Click to collapse
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Techitrucker said:
Its been years since I've seen a phone thick enough that the jaws need to be anywhere near as deep as the vast majority of the squeeze cradles on the market yet they still make them that deep, at least the ones that are big enough to hold a PDA. This would not be much of a problem except they use soft foam in the jaws that is almost invariably also very thick. When you squeeze it tight enough to keep the phone from falling out, it has a tendency to roll the foam right down over the screen making it difficult to use things like the slide tray in Touchflo 3D. It is also difficult to remove the phone as after a short while the teeth of the jaw start wearing down and it sticks closed making the button hard to push. And thats with a good cradle like and Arkon, which is what I have been using. Lesser quality cradles are even worse. There are better squeeze cradles that address these issues but they are all for Iphones. Saw a nice one the other day with nice thin jaws and rubber grips that fit the phone perfectly with a friction lock instead of teeth and a cam but it had and Ipod cable and FM transmitter built in making it very expensive at like $69. Looked real nice too with a nice shiny finish like the phone has but at that price, wasn't going to buy something that I had to cut up to use. To bad the company did not make one with a USB cable instead. Unfortunately most of the good stuff is made by companies that drank large quantities of the Steve Jobs kool-aid years ago.
Click to expand...
Click to collapse
Thanks for the response, very good reasons not to go with a giant squeeze cradle.
I've been looking at this mount http://www.arkon.com/phonemount.php
Curious if anyone else has used it with the TP2.
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
I have an old Treo 650 Pro-clip mount that works perfectly with the TP2. The phone slides in securely and comes out easily. Obviously no active connection but it works great. I put double sided tape in the back of the of the mount and it holds my Fuze perfectly as well.
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
MrGoodCat said:
yo Techitrucker,
you ever get that car cradle. i am really thinkin bout getting one, but would like to hear some first hand experience with it, especially since we both got vzw
Click to expand...
Click to collapse
Just came in the mail on Saturday. The cheap shipping took one week to the day. Quality of the cradle is very good. The clip at the top is actually spring loaded, not just plastic that bends back, like the Seidio holsters. It is removable if you won't need to use the cradle in landscape to make it easier to take in and out. The cut out at the bottom is definitely for the CDMA phones. It should work with the European versions also. THIS CRADLE WILL NOT WORK ON THE T-MOBILE VERSION AT ALL. It is a perfect fit for my Verizon phone. This is not a cradle you want if you need to use the keyboard while it is in. For me that is not and issue and it makes me uncomfortable having plastic wedged between my keyboard and screen anyways. Seems like it would be hard on the slider. The windshield mount is very nice. It has push button friction locks instead of screws for the joints and the rotation is spring loaded so its easy to rotate when needed one handed. The suction cup is very large and has a good positive locking mechanism. It is larger than the average suction cup so if you need a dash disk like I do, you will need the largest one you can find. Unfortunately it does not come with one. Since they are selling this so inexpensively, that probably a place they needed to cut their losses. The quality of the cradle is much higher than the price. The cradle does not use a standard mechanism to join it to the mount so you will either have to use the one it came with or go to the website and see if they have another kind of mounting solution. This is really the only limitation I can find. You will not be able to use it with your Proclip solution if you have one. Any more questions you have, just leave them in this forum.
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
treo...not! said:
My phone works splendidly with a $15 squeeze cradle from Walmart. It's not too thick, secure, and does not obscure the screen.
Click to expand...
Click to collapse
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
cincy1020 said:
Hi:
What department did you find it in? I have searched by where the cell phone cases are, and can't find a thing.
Thanks!
Click to expand...
Click to collapse
check automotive section
MrGoodCat said:
thanks man sounds sweet. yeah i am just lookin for something to just hold my phone in the car, and this sounds great. thanks for takin the time to review. i am only a couple hours from the websites store, hope it doesn't take a week, hah. buyin one right now.
whats this proclip you are talkin about? i am new to the ppc phone genre. are they really that superior? what would you say makes em better than this cradle you just got? just curious, like hearing first hand experiences, thanks
Click to expand...
Click to collapse
I had one for my Touch Pro and it was nice enough but it kind of made the gap between the keyboard and phone wider over time. If you absolutely have to have the keyboard open while driving its probably the best on on the market, though to me that keyboard open is just and invitation to disaster. Its hard enough to keep hands off the phone while closed They are not inexpensive by any means. Depending on how you need to configure it you can easily spend well over a $100 bucks. The powered cradle alone without a car specific mount is $60 which is competitive with other powered solutions, but the non powered ones at $40 bucks seem more than a little like highway robbery to me especially since you will still spend $30+ on the mounting solution for the cradle. Still, if you need that keyboard open its the only decent solution at this time. They have no powered option for Verizon yet, but the non powered one they have listed for the AT&T Tilt 2 will work on Verizon and Sprint. The phones are exactly the same shape as the AT&T phone except for the ports on the bottom. If you want a fitted cradle but don't need the keyboard to open while mounted, this is the posted cradle only real solution I've found, but its inexpensive and good quality.
Now if you want the best of both worlds, I was wrong about the Proclip mounts not working with the cradle. They make absolutely the best mounting solution hands down since there is no damage to the vehicle. They have cradle adapters on the site that will make it work and the price is not to bad.
http://www.proclipusa.com/?sectionp...egoryid=&p_year=&p_countryid=0&p_leftorright=
The suction cup on the cradle is 3.25 inches and this adapter is 3.5 inches so it should work.
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Nice find
RemE said:
I'm not a fan of clamp holders or suction cups, had enough of unintentional flying objects. I usually make my own holders that slip into a vent clip from theclip.com
http://theclip.com/store/Ultra-Clip-with-Vent-Mount-p-16176.html
This time I found a perfect custom made touchpro2 holder for $1.35! It clips right into the vent clip with just a little grinding on the vent clip. It holds the phone solidly and perfectly positioned for easy phone use and GPS mapping.
http://www.cellphoneshop.net/pro2holster.html
Click to expand...
Click to collapse
Nice find on the holster. Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. I find that taping a small vanity mirror to the dash works much better than those little round plastic disks since they where designed to stick to glass. If you have two phones and two holders like I do, the small rectangular one they sell in the automotive department at Walmart will hold both and its only 2 bucks and looks nice. I am not a fan of any kind of vent clip. The two worst enemies of electronics are heat and cold and something as heavy as a PDA is going to break the vent eventually. What I have done in the past is use something like this: http://theclip.com/store/The-Clip-Mount-p-16156.html with a holster or case.
I'm going to get the holster. Been looking for one that faces out like that.
I already have a clip in the car so won't need to take my mount with me when I get off the road.
Techitrucker said:
Never had a problem myself with a good suction cup holder and nothing bounces like a Freightliner. .... If you have two phones and two holders like I do......
Click to expand...
Click to collapse
Driving a semi, using not one cell phone, but two???
You're probably a great driver. But I'm glad there are several states between you and I.
Techitrucker said:
Someone is finally making a car cradle for the Touch Pro 2 that Verizon and Sprint (Not T-Mobile) should be able to use and its cheap. I emailed the U.S. seller and he said it fits though it is really for the GSM Euro versions. No surprise though as it is passive only. Heres a link to their website: http://www.buygpsnow.com/HAiCOM_Car_Mount_HTC_Touch_Pro2.aspx
Anything is better than a squeeze cradle
I have one ordered so will update a review but at $12.95 and $2.50 shipping kinda hard to go wrong even if it only lasts until Proclip gets off their duffs.
I found a coupon code for free shipping. It is hit or miss apparently but worth a try. Code is 430.
Edit: Code did not work
REVIEW IS ON POST #9
Click to expand...
Click to collapse
tons of this stuff on ebay - pick a random one at 10-12 bucks with free shipping and if it doesnt work out too great its no big loss
Anyone know if this will work for the Tilt 2??
http://cgi.ebay.co.uk/ws/eBayISAPI....5&ssPageName=ADME:X:RTQ:GB:1123#ht_4013wt_939
Thats exactly what im looking for but thats the only thing that comes close. I want a sturdy vent mount that can rotate to landscape mode
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
NOT TRUE.
Just spoke with porclip.
The t-mobile version has not been developed and they do not expect it to be manufactured soon.
mpr_ger said:
BRODIT or PROCLIP here in the USA. They have been on the market for about 100 years. at least :-D
They make active, passive, ... versions of their mounts. For almost all available mobile devices. Great quality.
www.brodit.se
www.proclipusa.com
http://www.proclipusa.com/default.a...egory=4&device_brand=16708&device_model=17907
Click to expand...
Click to collapse
I been using my GPS suction mount. It make a great stand and it also work for holding the g tablet with one hand. Oh, and it's cheap.
See this thread for pics:
http://forum.xda-developers.com/showpost.php?p=10099907&postcount=10
Oh, and can be picked up at Best Buy or amazon.
Cheap option: $10
http://www.amazon.com/gp/product/B0..._m=ATVPDKIKX0DER&pf_rd_r=1R0XVJJ2GGEEDQBQD4N3
A little more adjustable option: $12
http://www.amazon.com/GARMIN-010-10823-03-Adjustable-Suction-Cup/dp/B0012MJXXA
Thats an excellent idea!! Thanks for that, I was using a picture frame holder, but I like this better.
[email protected] said:
Thats an excellent idea!! Thanks for that, I was using a picture frame holder, but I like this better.
Click to expand...
Click to collapse
Glad you found it useful. It's made my tablet much more enjoyable.
My dock just arrived, but I like this for when the docks not needed (charging, HDMI out, ethernet). the dock has a fixed angle. I can muve the suction cup up or down and modify the angle as I like or the situation dictates.
$1 wire picture frame holder from walmart. Works great and was really cheap.
jasco13 said:
$1 wire picture frame holder from walmart. Works great and was really cheap.
Click to expand...
Click to collapse
yup, thats exactly what I did, works great.
I have been using one made for the Ipad by Targus. Its a little clear acryllic plastic peice that allows for 45 degree viewing and 80 degree viewing for Portrait mode as a reader. It was only 15 bucks at Micro center.
http://www.google.com/products/catalog?hl=en&biw=1707&bih=787&q=Ipad+Stand+Targus&um=1&ie=UTF-8&cid=5638337552270977208&ei=klsfTffqGo64sQO7_di4Cg&sa=X&oi=product_catalog_result&ct=result&resnum=4&ved=0CEIQ8wIwAw#
Suction Cup Stand
Tried this out for myself and it works great.
Thanks for the idea.
Local Target had the Garmin ones for $12.... wish Ihad picked it up.
I wouldn't want to be around when you're carrying it around with one hand and that suction cup lets go...
festivus said:
I wouldn't want to be around when you're carrying it around with one hand and that suction cup lets go...
Click to expand...
Click to collapse
If you lok at the picture you might notice I don't just grab the holder. My hand is under the tablet with my thumb or fingers around it. I can comfortably hold it with one hand this way.
As a stand, even if the suction cups came loose, it would be a big deal.
If left on for a long time eventually they will come loose. I only put it on when I'm using it and it if fairly sturdy. But yes... due care is in order.
I bought a garmin suction cup holder on e-bay for $ 6 delivered. Works perfectly!
Great idea.
Getting mine from ebay as well, $3, that's crazy.
Been wracking my brain trying to come up with some sort of stand i liked, and this was it, great idea.
I have the carbon covering on the back. I'm suspecting the suction won't work, anyone can confirm? Thanks.
pc2828 said:
I have the carbon covering on the back. I'm suspecting the suction won't work, anyone can confirm? Thanks.
Click to expand...
Click to collapse
I have the same covering and no it will not hold suction.
Do you think that one of these things would be sturdy enough to hold during a car ride? Im contemplating using my old GPS suction mount as an alternative as you recommended.... My idea would be to have the side that is used usually on the GPS to be screwed into existing holes in my car.... I have a fairly comfortable non-bumpy ride (Yukon) so, it's got me thinking....
ssmr2t said:
Do you think that one of these things would be sturdy enough to hold during a car ride? Im contemplating using my old GPS suction mount as an alternative as you recommended.... My idea would be to have the side that is used usually on the GPS to be screwed into existing holes in my car.... I have a fairly comfortable non-bumpy ride (Yukon) so, it's got me thinking....
Click to expand...
Click to collapse
Hummm... It may, at least for a while.
Honestly there is a change it would lose suction at some point and end up falling. So it's up to you.
Ive ordered some of the carbon fiber for the back of the tablet, im just concidering that if im going to stick this carbon fiber on the back, perhaps i could maybe put a hole in it and incert some sort of bracket, or clip, that i could connect a mount or stand too, if the gtab had some sort of connection on the back, even if it was just some sort of sleeve for a mount to slid into, would make it easy to make a stand, and have some sort of car mount, what do you guys think about this idea ?
i don't have anything on the back of my tab, but can't get the suction cup to stay more than a few minutes. are you using something to hold it in place other than suction?
williec30 said:
i don't have anything on the back of my tab, but can't get the suction cup to stay more than a few minutes. are you using something to hold it in place other than suction?
Click to expand...
Click to collapse
Nope... Just the suction cup.
Maybe you have a bad suction cup. Male sure it clean.Wipe both surfaces with a damp cloth.
Another universal stand that works great with tablet
Link: http://cgi.ebay.com/IPAD-ST-Univers...412?pt=LH_DefaultDomain_0&hash=item35af09a474
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Here are pics
Sent from my C6833 using xda app-developers app
So you have to put a plate on front and back of your case?
I don't use a case currently. I'm assuming I could just stick one of these pads to the back of the phone?
Are they really secure going over big bumps and stuff like that?
Yeah I put plates on the case because I didn't want to stick anything to the phone. It would obviously be lighter without a case, and thus hold better if you stuck it to the phone. It's been really secure over bumps and at high speeds. Held perfectly during a 7 hr drive last week.
I am using this one.
http://www.ebay.de/itm/281172219396?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2648
It's the only customfit car holder for the Ultra I could find. When in the car I remove my Ultra from the Nillkin case and put it in the holder. I use it for navigation quite a lot and I hate it when the phone is loose in the car holder which is the case with most universal clamp style holders.
I have the InfiniApps Slyde CD Slot Mount also. Best phone mount ever. CD players are usually in the best location for viewing. I had cup, dash mounts, they were terrible. I used the sticky metal plate and attached it to the back of a case. Also magnetic attachment makes for quick removal of the phone when you want to check a message etc...
omniphil said:
I have a nice dvd slot mount that grabs the sides of the phone with foam covered retractable arms, but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
Hi can you post some pics of it...???
This is the one I got. Worked pretty good until the Z Ultra..
http://www.mountek.com/dp/B004G1L52Q
Cool these look good. Just found another one which is cheaper than the others $12.99 + $2.99 delivery. Looks like it does the same thing and will also fit the Z Ultra (checked the dimensions). Link
Is there any risk that the CD slot ones will damage the CD player? Is the slot strong enough to handle the weight of the Xperia Z Ultra?
I've been using PuGoo sticky pads for a good year or two now to mount whatever smartphone I'm using. It's very handy.
http://www.amazon.com/gp/product/B00F68G58M/ref=olp_product_details?ie=UTF8&me=&seller=
You do need a good spot for it though, which luckily my xB has.
omniphil said:
...., but the Z Ultra with its power/volume in the center is a little hard to use. I use waze and google navigation a bunch and would be nice to find something that holds this in the car somehow.
Have you guys found any creative solutions?
Click to expand...
Click to collapse
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
abuihsan said:
I had same problem with those centered power/volume button and I found this -epay #251340401428-, look at seller's other items there are few kinds of mounting type for X ZU. I bought one and still waiting for the parcel so cannot review yet.
Click to expand...
Click to collapse
I already have this car holder and it works fine. It keeps the phone firmly in place and it is easy to put in and take out.
cholepuree1 said:
I am using the infiniapps magnetic mount. It works great! Ofcourse, it depends on if your phone is naked, in a bumper, or in a case. I'm currently using the incipio feather case and have stuck the metal plates to the case itself (not my phone). and It holds really well. With the infiniapps mount, you'll only get one adhesive plate so I bought an additional one as well. See pictures for how I've attached the plates. I'll upload a picture of the phone mounted tomorrow.
infiniapps mount - i bought it on sale for $19.99
http://www.amazon.com/InfiniApps-Sm...TF8&qid=1381339071&sr=8-1&keywords=infiniapps
Additional metal plates
http://www.amazon.com/iMagnet-Rectangular-Metal-Adhesive-Mount/dp/B00BSAD7ZQ/ref=pd_sim_cps_1
Click to expand...
Click to collapse
Does it stay in place while driving and when hitting potholes or bumps?
It does hold very strong, I just got one of these. I hate cases on my phone but I put one on so I could attach the metal plate to the inside of the case. It has never fallen off on even the biggest bumps.
I am still deciding if I want to just stick the plate to the back of my phone... I wonder how easy it is to get the adhesive off the back glass if I ever wanted to remove it...
Yes is holds really well. Just had a 6hr drive this morning!
Edit: Here is a picture of how it looks while driving.
Sent from my C6833 using xda app-developers app
Just wanted to say that I just bought this:
Scosche stuckUP
Its early to tell but the quality feels solid compared to the many ebay cheapo one that end up breaking in no time.
The whole things just feel quality..and for the price it better! lol
Several ways to use it...I went with Windshield for now. Holds the phone very tightly and during the trip its very stable.
Also, I did not even have to remove the flip case I have which makes it seem a lot bulkier so I feel it will do great with either the CP12 or any of those battery/case combinations.
Happy to finally have my phone up there even if it blocks most of my view! LOL
I have come to the conclusion that a universal mount for a small tablet is the ideal car mount, so I have been looking at ebay for ones designed for the Nexus 7, Memopad 7 and Samsung Tab 7, and then checking that they can be adjusted small enough for the XZU.
this one in particular looks appropriate:
http://www.ebay.co.uk/itm/160672229905?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649
it's a little bit more expensive than I'd expect for a simple product, but I've not seen a similar unit.
The one I bought above works excellent, it is for phones but depends on what you like.
I am very happy with the quality compared to all the crap I bought before lol
I have one of the Imagnet mounts in my F350 I used with another phone. I checked the Z Ultra and it sticks to it without needing the metal plate attached to the back of the phone. Right under the camera area inside the phone is enough metal that the magnet works fine. I have driven with it in that bouncy old truck and it does not come off or move around at all. The only bad thing is the metal is not centered so the phone only sits in portrait orientation. But it beats having to stick a metal plate to the back of the phone.
I like it because I am in and out a lot through the day and it is quick and easy to just toss the phone onto the magnet then just grab it off there when I need it. I have not tried it with a power cable attached but most likely it will just make it tilt over a bit depending on how much the power cable hangs down I guess. With the battery life of this phone it has not been something I have needed compared to the Mega 6.3 that would go dead much quicker streaming slacker radio over bluetooth than this beast of a phone. Most likely the charger cable would have to be supported in some way to keep it from making the phone lean to one side.
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
Looks okay but I prefer the imagnet...
I love ProClip's holders. You select the custom mount for your car, and then the custom mount for you phone. I've owned several brands of custom clips throughout the years, and I've never been happier.
https://www.proclipusa.com/
Doug
After having tried several car mounts, I have come to a point where I do not want any snake-type car mount - the ones with extensible, adjustable arm ... with time, and car vibrations, they do not really stick in place, and dangle around a little bit.
Lately I happened to pick a glass screen cover from xtreme guard where they offered promotional Flozu car mount + a 90% discount coupon ... at the end, it was really a deal for the both of them..
I have been using the flozu mount since around 1 month now, very solid, top notch. secure suction locking mechanism, seems to hold much stronger to the windshield than my previous ones. The absense of the extensible arm made it VERY stable in terms of vibration and permanent "dangle" . It holds my note 3 firmly (not strongly) between its pliers, and manipulating the plier to open it is very easy - not complicated spring-loaded buttons to press - which get worse with time - which you see on other models. Seriously recommend.
Here is the link to the Flozu mount:
http://www.xtremeguard.com/product-p/car-mount-flozu.htm
mine came today (Flozu mount), fairly quick standard shipping delivery. I expect it'll do a very good job. At first I thought it was rather pricey ($49.99 USD) but then the 75% off discount code appeared -- can't find anything decent in the stores for $12.75! easy to mount to the windshield, nice firm grip of my unprotected S3 (countdown to upgrade: 3days). I'll update after having used it awhile.
Rick
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Airframe+
I use the Kenu Airframe+. Mounts in the vent and holds really well. Also works as a kick stand since it's small and you can carry it around with you with you're not in the car.
Best mounting system I've ever owned, but it's not cheap.
https://www.proclipusa.com/
Doug
I use this holder for my Note 3. Its been good for a year now and cheap.
Can twist it for landscape or portrait and can hold any phone as most of us use cases on our phones it will fit any phone... One problem is your car will need to have strong vents and not too deep directors inside as the back will need to grip onto those.
EBay number item number 311275702025 check can't post link as I'm a new member.
Masik v6.0 lollipop Note 3 N9005
I just bought my second one of these. Super sturdy and the suction cup has a gooey material on it that literally will stick to just about anything!
second this!
ickensai said:
I use mountek products. one of the most stable products to use by locking it in your cd slot or between the dash crevices. Great as some states may not allow suction cup mount on glass.
http://www.mountek.com/shop/
Click to expand...
Click to collapse
I've had this mount for around 2 years and I love it! 2 of my friends got it after they saw mine.
I hardly ever use my CD changer but it still functions normally if you do.
In my car it puts the phone in the perfect place. Here's a few pictures of it in my car so you know how it looks.
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
joebongo said:
I've struggled to find a phone holder that works well with the size of my note 3 in a Trident Kraken AMS case.
This one however is inexpensive and works well http://www.wilko.com/car-accessories/rockland-mp3sat-nav-holder/invt/0345172?VBMST=car phone holder
I thought I'd post it up in case it helps anyone.
Joe
Click to expand...
Click to collapse
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
ProClip
I've used ProClip mounts in two different trucks with three different phones. I wouldn't use anything else. You buy the mount in two pieces - one piece for the vehicle, that's specific to the vehicle, and where in the vehicle you want to mount the phone. It has tabs that insert into the existing seams of your car's interior. No drilling, no bolts to unscrew, a very clean installation. The other piece you buy for the phone (or tablet, or GPS unit). They have many phone mounts each designed to fit a specific phone - as long as you don't have a case on it. They also have phone mounts that are more universal in nature for those that use a case. Any of the phone mounts will attach to any of the vehicle mounts.
It's expensive - each piece has cost me between $35 and $40, so around $75 when you first buy the system. But if you get a new phone, you only have to replace the phone mount. If you get a new car, you only have to replace the vehicle mount.
It's a premium mount. It holds your phone firmly in place, and it's a clean , professional looking installation. I think it's worth the cost.
For my Note 3, I've been using the Exogear ExoMount Touch -http://www.exogear.com/products-exomount-touch-one-touch-car-mount-holder.html . The reusable adhesive pad works surprisingly well and it is a cinch putting in and taking out my Note 3, even in my Urban Armor Gear case. Simply put the phone into the mount and the arms snap close around the device, and to remove I just press the release buttons. Easy in, easy out.
The one issue I had was one one occasion the tightening nut cracking, but I think that was as a result of me carelessly over-tightening on one occasion. The company quickly sent me a free replacement, however.
Journyman16 said:
I got a simple silicon mat on ebay - sticks like glue to the dash and you can just slap the phone on it (gently) and it sticks even on bumpy roads. And if it gets dusty you can just wash it in water - works brilliantly and cost me about $5
Looks a little like these but the 'bumps' aren't so noticeable on mine.
Click to expand...
Click to collapse
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Ps2004 said:
Had this kind of things, but last summer, they melted, and left mark on dashboard :/ couldn't clean, now you can see it, so beware of the heat/sun
Click to expand...
Click to collapse
Not sure where you are, but mine's been through some pretty hot days with the car parked in the sun and no problems. Silicon shouldn't melt - it melts around 1400ºC - if your car is getting that hot you'd have to be approaching the Sun I think. Maybe yours was plastic?
Just check my history on dx.com, and yes, it seems you were right, it was PVC, must say I didn't check that as it said made for car dashboard.
Anyway, just be careful what you buy.
Oeps said:
Hello
In the past I used only phone specific holders like proclip. Works fine but expensive. Now the kids want to use the car too so I changed to an universal holder.
Now I use http://www.rammount.com/part/RAM-HOL-UN7BU
Fits the s4 mini and my Note 3 too.
Besides the holder you'l need:
Ball base http://www.rammount.com/part/RAM-B-202U
Arm: http://www.rammount.com/part/RAM-B-201U-A (various lengths available).
Not cheap but you by it once.
Click to expand...
Click to collapse
I second the RAM mounts. I use the cupholder version, then the ball arm, and the X clip. I can even swap out the attachment with my medium/large RAM holder that fits a nexus 7, or my large holder that fits an ipad air. Ram mounts aren't cheap, but they're versatile and built to last. I'll never need to buy another mount system again, unless I find a really oddball device in the future and need a new attachment for the Ram.
I finally found the perfect mount for my taste. Universal + with charge function.
http://www.1a-pc-shop.de/shop/hr-30417-universal-smartphone-charging-dock.html
You cand adjust the x and the z axis of the power connector holder at the bottom. There are 5 adapters included for different cables. Works very well with my usb 3.0 car charger. Silicon case no problem.
Now I just slide in the Note 3 and it charges. And this should work for many devices to come.
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
For the life of me I can't find the brand name but it expands in the cup holder has a flexible gooseneck and a holder that tilts at different angles. It is adjustable for most phones width. I found it on eBay a long time ago
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
With my Note 4, I very happily used iMagnet. With my S7, it didn't occur to me that it doesn't go so well aesthetically with a clear-backed case like the Otterbox Symmetry Clear. I'll probably get an inexpensive case to keep and use in the car.
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Corwinder said:
I use the I Magnet mount. Been using it for a few years in a few different vehicles. The only time I ever had a phone come off the mount was the day I hit a deer doing 65 and totaled my car. Thankfully the phone wasn't damaged. The biggest downside is if you use the adhesive to stick the metal plate to either your phone or a case then it's more or less not reusable on another phone or case. Glad I saw this thread as I just realized I needed to order more steel plates. These steel plates will interfere with NFC and wireless charging. So I end up either just putting a steel plate loosely between the phone and case and then take it out when I'm done. Another option is to have two cases. Mount a steel plate inside your second case and just switch cases as needed.
Click to expand...
Click to collapse
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
RebDovid said:
I tried just putting a plate between the S7 and my Otterbox Symmetry case. It wouldn't stay in place, making too scared to try driving with it.
Click to expand...
Click to collapse
That's when you bite the bullet and remove the paper backing covering the adhesive and make it stick in place. To tell you the truth, I've never done that either. I've always used the adhesive thus my need to order more steel plates today.
YesEvil said:
As the title suggests, can anyone recommend a decent in car cradle/holder for the S7?
Thanks in advance
Sent from my SM-G930F using Tapatalk
Click to expand...
Click to collapse
It would help if you would specify what function would you like it to serve....ie (wireless charging, magnetic, windshield mount, CD mount, vent mount (etc), one handed operation....
I use mine as a phone holder and dash cam. Wireless charging in the car is not important to me right now. Here is the combo that I currently use and it works well...
http://www.amazon.com/Mobie-Grips-M...&redirect=true&ref_=oh_aui_detailpage_o08_s00
http://www.amazon.com/Universal-Qun...&redirect=true&ref_=oh_aui_detailpage_o07_s00
http://www.amazon.com/TomTom-GPS-Da...&redirect=true&ref_=oh_aui_detailpage_o09_s00
I use the base from the second link with the actual phone holder from the first link (universal ball joint) and have it suction cupped to to the item in the third link. It sits perfectly on my dash and works very well in my vehicle. It is secure, easy to put the phone in and out of, and provides me with easy access to the phone as well as all of the functions I wanted to accomplish with it.
Of course, you can just keep it simple and use the item in the first link and just suction cup it to the windshield...that's up to your needs and vehicle.