Related
I have one right now... but it's a cheap one from Ebay. When I first bought it, it fit real nice and tight but now over a month or two it's getting loose and slides around a bit.
Anyone have any suggestions? I'm looking for the following:
1. It doesn't expose the metal part of the camera on the back cover.
2. Fits snug on the phone indefinitely (is this possible?).
... and if possible one that isn't really sticky.
Thanks!
Silicon case!
I was bought one silicon case on HTC STORE http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=176956 and is great. Cost 20$.
hi, i have a clear one of these, think i would buy the grey next time. its also a cheap ebay item. its very snug, not as flexible (which makes removal a bit of an effort) and nowhere near as sticky as some silicon cases.
http://cgi.ebay.co.uk/Soft-Silicone...h=item110357833639&_trksid=p4634.c0.m14.l1262
hope this helps
Yeah i bought one of those that bl1nky recommended. The only thing i can say is that the fit around the bezel edge is not as good as other 'softer' silicon covers.
In my case particularly, the right hand edge is badly formed and seems to pull away from the HD bezel.
In addition i find that locating and using the power switch to be troublesome and it's this that i find most annoying.
My personal quest for the perfect case continues....
Thanks for the suggestions... I'm also in the search of a perfect case. You wouldn't think it would be this hard!
I am using this from boxwave. The fit is nice and not sticky. I went with the clear one.
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
900SS said:
I am using this from boxwave. The fit is nice and not sticky. I went with the clear one.
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
Click to expand...
Click to collapse
Looks pretty good, I just ordered one. Thanks!
cRaCKwHoRe said:
Looks pretty good, I just ordered one. Thanks!
Click to expand...
Click to collapse
Let us know how you get on, this looks like a good little case.
dashfield said:
Let us know how you get on, this looks like a good little case.
Click to expand...
Click to collapse
Will follow up when I get it then
cRaCKwHoRe said:
Looks pretty good, I just ordered one. Thanks!
Click to expand...
Click to collapse
good choice. its the best case IMO. the grey one is almoste invisible. really thin and it protect greatly the phone.
Looks great... may consider one!
http://cgi.ebay.co.uk/Soft-Silicone-Skin-Case-For-HTC-Touch-HD-Gray_W0QQitemZ110357833639QQcmdZViewItemQQptZPDA_Accessories?hash=item110357833639&_trksid=p4634.c0.m14.l1262
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
What is the difference between these 2?
dnbcat said:
http://cgi.ebay.co.uk/Soft-Silicone...h=item110357833639&_trksid=p4634.c0.m14.l1262
http://www.boxwave.com/products/crystalslip/htc-touch-hd-crystalslip-case_3387.htm
What is the difference between these 2?
Click to expand...
Click to collapse
They look the same from what I can tell in the pictures... but you never know on Ebay it could be a cheaper knock-off of the original. I don't know because I haven't purchased the one from Ebay. I will be getting mine today or tomorrow from Boxwave and I'll take some pics of it and stuff and update here.
Is it the non-transparent one with small camera hole? (I'm in the boarding shcool where ebay is locked) If so, it's good, but rather thick, good for protection, but will make your HD thicker (around 16mm). If not, just remove this post.
cRaCKwHoRe said:
Will follow up when I get it then
Click to expand...
Click to collapse
Ok so I got the case and have been using it for two days now. It is pretty damn nice actually. It fits well, not too tight and not too loose either. It's not sticky like the cheap Ebay one I have so I can easily slide it in and out of my pocket. I got the smoke color. It's clear and shiny so it suits the HD well. I like being able to see the phone through the case as well.
can try this silicon case from Capdase
CW any pics mate ??
i got the silicon case from ebay and its not a tight fit.come off very easily. am now on the hunt for another case. there is a case for the iphone which is a plastic case but a rubberised finish.
laidbackfreak said:
CW any pics mate ??
Click to expand...
Click to collapse
I have a crappy digicam but here are some. Sorry for the blur It doesn't like to focus up close...
cheers CW looks good, next question, do you use a car holder of any sorts ?
If so hows the fit ?
So I finally got the holster in today and here's a short video I made for it.
Just showing the holster with the phone in it and the d3o case.
Hope it helps you guys decided if you want to order one too.
http://www.youtube.com/watch?v=WdkXPyxUWB4&context=C3db245dADOEgsToPDskKMpJ9bMpvBE8o7t2s_KPaJ
And in case you do want to order one here's the link for that:
http://www.amazon.com/gp/product/B0050LW42Q/ref=oh_o03_s00_i00_details
I ordered mine from BluMall.
Yes that is the exact case I have it has been great so far, also if you turn the phone facing the other way the audio jack is mostly uncovered. I think you would still need to cut it out just a little but not near as much.
PhantomWraith said:
Yes that is the exact case I have it has been great so far, also if you turn the phone facing the other way the audio jack is mostly uncovered. I think you would still need to cut it out just a little but not near as much.
Click to expand...
Click to collapse
I've actually found that with this holster if I push the phone up a little bit from the bottom I can use the headphone jack.
The phone would be in the holster WITH the cover closed and basically just not touching the bottom of the holster.
But I don't know if the only reason that works is because I have a bulky (d3o) case.
Other cases or just the bare phone might cause the phone to slide down and sit on the bottom anyway.
Also was just on T-mobiles site and I noticed a D3o pouch as well
PhantomWraith said:
Also was just on T-mobiles site and I noticed a D3o pouch as well
Click to expand...
Click to collapse
Just checked it out after you mentioned it, looks like that holster has d3o technology built in.
However I don't think it would hold the phone with a case on it.
Looks pretty slim.
And definitely does not cost 4.57 with free shipping lol.
Duracell makes one that's large enough for the amaze with the tmobile case on it. Sorry, don't know the model number. Bought mine at Frys electronics...
Sent from my HTC Amaze 4G using XDA App
curtisue said:
Duracell makes one that's large enough for the amaze with the tmobile case on it. Sorry, don't know the model number. Bought mine at Frys electronics...
Sent from my HTC Amaze 4G using XDA App
Click to expand...
Click to collapse
Is it this one?
http://www.frys.com/product/6878676?site=sr:SEARCH:MAIN_RSLT_PG
hasoon2000 said:
Is it this one?
http://www.frys.com/product/6878676?site=sr:SEARCH:MAIN_RSLT_PG
Click to expand...
Click to collapse
Wow that's like 20 bucks. I got mine for 4.57 with free shipping.
I kinda like that deal better, lol.
nguyendqh said:
Wow that's like 20 bucks. I got mine for 4.57 with free shipping.
I kinda like that deal better, lol.
Click to expand...
Click to collapse
Haha. I bought a velcro one for $1.99. It does the job but I HATE velcro! lol
hasoon2000 said:
Haha. I bought a velcro one for $1.99. It does the job but I HATE velcro! lol
Click to expand...
Click to collapse
Yeah I wasn't too fond of the idea of velcro either.
nguyendqh said:
Yeah I wasn't too fond of the idea of velcro either.
Click to expand...
Click to collapse
I don't like the case you got. I was thinking of buying this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=320821986189
That style is the way I like. I don't like the flap covering up the whole phone.
http://www.google.com/search?q=TPU+...s=org.mozilla:en-US:official&client=firefox-a
Im gonna get me one of these.
Ive got one on my GNote & like it alot cause it's so thin.
I think it will work out great for our 6800.s
Now.. just got to decide on a site to buy from.......
jimmbomb said:
http://www.google.com/search?q=TPU+...s=org.mozilla:en-US:official&client=firefox-a
Im gonna get me one of these.
Ive got one on my GNote & like it alot cause it's so thin.
I think it will work out great for our 6800.s
Now.. just got to decide on a site to buy from.......
Click to expand...
Click to collapse
They were available on eBay before the P6800 were even officially released. I got one and it fits very well, but using the Samsung book case now.
There is lot of them there for very cheap:
www.ebay.com/sch/i.html?_from=R40&_trksid=p5197.m570.l1313&_nkw=P6800+tpu&_sacat=See-All-Categories
Morkli,
Where did you pick up your Samsung book case? Got the email that my 7.7 has been dispatched and am gearing up on the accessories....
Aspi
Aspi914 said:
Morkli,
Where did you pick up your Samsung book case? Got the email that my 7.7 has been dispatched and am gearing up on the accessories....
Aspi
Click to expand...
Click to collapse
At the time I got my tab, there weren't many cases available. I ordered my case from:
http://www.daydeal.com/product.php?productid=64197
Can probably find it cheaper now. Maybe check eBay too.
still waiting nice looking and high quality case，hope some good design coming soon
Has anyone found a tpu case without the weird X on the back? Like just a smooth unmarked back.
neenski said:
Has anyone found a tpu case without the weird X on the back? Like just a smooth unmarked back.
Click to expand...
Click to collapse
I found one today while looking for the same thing myself. Can't post links due to be a new site member, but if you look up on ebay the user 'freebitsuk' you'll be able to get to their store.
They also have it bundled with a screen protector too. Three colors available black, pink & purple.
daf22 said:
I found one today while looking for the same thing myself. Can't post links due to be a new site member, but if you look up on ebay the user 'freebitsuk' you'll be able to get to their store.
They also have it bundled with a screen protector too. Three colors available black, pink & purple.
Click to expand...
Click to collapse
Thanks! I'll have to check that out.
daf22 said:
I found one today while looking for the same thing myself. Can't post links due to be a new site member, but if you look up on ebay the user 'freebitsuk' you'll be able to get to their store.
They also have it bundled with a screen protector too. Three colors available black, pink & purple.
Click to expand...
Click to collapse
Those are silicone, not TPU.
morkli said:
Those are silicone, not TPU.
Click to expand...
Click to collapse
Ah is too, my bad. Didn't even notice that, thanks.
morkli said:
Those are silicone, not TPU.
Click to expand...
Click to collapse
Hmm, what's the difference between TPU and silicone? Is it just floppier than TPU?
how about this one? i am using right now, very fit!
Where did you get that case from cyuet? Looks nice!
jonamafun said:
Where did you get that case from cyuet? Looks nice!
Click to expand...
Click to collapse
Saw that one on eBay:
www.ebay.com.au/itm/160731760537?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
And something similar for much cheaper:
www.ebay.com.au/itm/280821487182?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Yes，agree.Just Got following one，quality great surface was finished，ultra thin and perfect touch
http://www.ebay.com/itm/16073524661...46616&_sacat=See-All-Categories&_fvi=1&_rdc=1
qw_haoyun said:
Yes，agree.Just Got following one，quality great surface was finished，ultra thin and perfect touch
Click to expand...
Click to collapse
How flexible would you say this case is? I'm deciding between this one and a silicon case myself. I'd like something more flexible than a plastic hard case, but not as floppy as silicone.
morkli,
Thanks!
I've ordered the cheaper one
Don't know how long they will take to deliver, though.
neenski said:
How flexible would you say this case is? I'm deciding between this one and a silicon case myself. I'd like something more flexible than a plastic hard case, but not as floppy as silicone.
Click to expand...
Click to collapse
dont worry about that，quality really good. cant be break easy，and feel nice when you hold it，smooth put on face.
I have the Smasung OEM case and it works beautifully....for me I think covering the screen is more important than covering the aluminium back. The first perceived issue with the OEM case "flap" is really not an issue at all as mine has never flapped open becuase of the way it is carried. In edition, it can be positioned in either landscape or portrait mode. It is a good idea to keep the rubber grip edge on the case clean so it continues to grip any surface. This device is such a beautiful design that I find the Samsung case compliments it very well.
neenski said:
Hmm, what's the difference between TPU and silicone? Is it just floppier than TPU?
Click to expand...
Click to collapse
TPU stands for Thermoplastic Polyurethane, it's a different material from silicone.
Generally firmer and has a more rigid structure.
Anyone have this case yet? They sold out until this coming Wednesday. If someone does could you please make a review with pictures and possibly a video please? As well as to would you rather have this than otterbox? Especially since the silicone is inside the hard case. As well as about the quality of the clip. Thanks in advance
Sent from my SM-N900T using XDA Premium 4 mobile app
I just wrote up a review on it over here: http://www.note2forum.com/forum/showthread.php?t=4335
YankInDaSouth said:
I just wrote up a review on it over here: http://www.note2forum.com/forum/showthread.php?t=4335
Click to expand...
Click to collapse
Nice detailed review me! Thanks!
Thanks ... hopefully it helped you a bit ...
YankInDaSouth said:
Thanks ... hopefully it helped you a bit ...
Click to expand...
Click to collapse
It's a little bulky for me but I always appreciate people reviewing things. Makes us more knowledgeable on things that we don't have physical access to
ukic said:
It's a little bulky for me but I always appreciate people reviewing things. Makes us more knowledgeable on things that we don't have physical access to
Click to expand...
Click to collapse
Yeah, it's definitely not a daily driver case for me either ... but for situations when things may get rough, it's worth having something like this handy.
YankInDaSouth said:
I just wrote up a review on it over here: http://www.note2forum.com/forum/showthread.php?t=4335
Click to expand...
Click to collapse
I have had a ballistic Shell Gel on 3 of my last phones and have been waiting on this case to be back in stock. I like this case because it has port plugs, however, I dont see myself using the SP part since I am already happy with my current SP.
What is your opinion on the fitment of this case without the SP part? Does it feel too loose without it, or does it fit better?
icky2g said:
What is your opinion on the fitment of this case without the SP part? Does it feel too loose without it, or does it fit better?
Click to expand...
Click to collapse
Honesty, I haven't tried the case without the included screen protector. I'd imagine it'd be OK ... I'm out and about and don't have that case with me. When I get back to it I'll try it without the screen protector and let you know ...
@icky2g ... just threw the case on without the included screen protector and do not see any fitment issues.
Now bear in mind I don't have any screen protector on my device ...
Anyone seen one? Want something relatively thin just to protect the edges. All the cases you seem to find are folio style or OTT protection.
There isn't much available for this tablet. Unfortunately, It's mostly cheap folio cases. The only others I've seen were the Poetic cases.
Yeah pretty slim pickings Even looked at 3D printing a case.
Ive been looking for one forever and haven't found any. I thought sit getting a custom made 3D printed bumper but it wasn't worth the cost. If you find anything let us know!
Pilz said:
Ive been looking for one forever and haven't found any. I thought sit getting a custom made 3D printed bumper but it wasn't worth the cost. If you find anything let us know!
Click to expand...
Click to collapse
I did find this:
https://3dwarehouse.sketchup.com/model.html?id=u4fc8976a-c14e-4006-8c89-7621330f59ca
Which I thought I might be able to modify and send off to a 3D print service like Shapeways.
Really after something thin just to protect the edges to be honest. Apple bumper style.
Chris_c81 said:
I did find this:
https://3dwarehouse.sketchup.com/model.html?id=u4fc8976a-c14e-4006-8c89-7621330f59ca
Which I thought I might be able to modify and send off to a 3D print service like Shapeways.
Really after something thin just to protect the edges to be honest. Apple bumper style.
Click to expand...
Click to collapse
If you do I would be willing to buy one. I don't know if ordering more would cut down on the cost of not, but I thought I would mention it.
Pilz said:
Ive been looking for one forever and haven't found any. I thought sit getting a custom made 3D printed bumper but it wasn't worth the cost. If you find anything let us know!
Click to expand...
Click to collapse
Yes, yes, we are waiting for news! As soon will be available to buy 2 pieces!
If anyone decides to do this, I'd be in for 4!
I'll take one if they're good! I would love for there to be more options like hybrid phone cases. I have a poetic and hate it. I cut the rubber off the button area because the power button just wasn't registering when I pushed it. And the usb port cover kept popping out so I cut that off too lol.. And the screen protector is so wavy and distracting that I took that out. I've got a tempered glass protector, which is so much better. I tried a cheap flip case but when it's folded behind its so annoying. Why don't they make them with magnets to hold them in place?
Sent from my SHIELD Tablet using Tapatalk
If you guys are serious, I have a 3d printer. I have the tablet drawn up too.
Sent from my XT1060 using Tapatalk
T-Keith said:
If you guys are serious, I have a 3d printer. I have the tablet drawn up too.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
what country are you from?
igeigeige said:
what country are you from?
Click to expand...
Click to collapse
US
Sent from my SHIELD Tablet using Tapatalk
I see, would you mind to print a sample , there was a template posted in the previous post.
igeigeige said:
I see, would you mind to print a sample , there was a template posted in the previous post.
Click to expand...
Click to collapse
Can anyone covert it to a stl file?
Sent from my XT1060 using Tapatalk
How about a Cooper Trooper, or Caseen case? Or a generic 8" tablet case?
I also saw this ridiculous looking case, but cant find it now. It appeared to be 4 big, black, slotted foam balls attached together in the form of a rectangle, with small bungie cords,
Sent from my LG-E980 using XDA Free mobile app