Hi,
I have been updated my G9 device firmware to 4.05. During update everything was ok. After update, a message appears that say "Starting applications". After 15 minutes nothing happened and mistakenly I have restarted my device. After restarting, archos welcome screen appear but nothing occur!
Also I try to fix it by recovery options like:
1- Repair System>Check Disk : No problem found!
2- Upgrade firmware: Downgrade firmware show me error 221 and trying to install 4.05 is successful but after installation my problem exist yet!
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
I'm so upset! Please help me to fix this problem...
is your device fully charged
Shano56 said:
is your device fully charged
Click to expand...
Click to collapse
Before update, it was 88% charged!
Did you try to flash the new official non-rootet rom?
SE-X1 said:
Did you try to flash the new official non-rootet rom?
Click to expand...
Click to collapse
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
do a re-format device, not an upgrade...it should solve the problem
Masih60 said:
Yes! I try to flash new official by recovery options, "Upgrade firmware" but it show me error 221 and don't flash!
Click to expand...
Click to collapse
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
what is the name of the file you are using?
pbarbosa said:
do a re-format device, not an upgrade...it should solve the problem
Click to expand...
Click to collapse
Dear friend, I told that...
3- Format Disk> Reformat Device...: Even I try to reformat it but after reformat and updating firmware, my problem exist.
Anyway... Thanks for trying to help!
pbarbosa said:
what is the name of the file you are using?
Click to expand...
Click to collapse
It's: "firmware_archos_it4.aos"
TjaXanK said:
That means that the fw is corrup or that tne filename is wrong, all you have to do is re-download the firmware and make shure that the filename is correct (without a "2" or any other number at the end that indicates it was the second firmware file in the donload folder)... so reformat your device and retry.
Hope I helped,
Tom
Click to expand...
Click to collapse
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Masih60 said:
mmmm... I'm noob at handhelds but it seems that a part of my device that boot it has been damaged and I don't know how to fix it...
Click to expand...
Click to collapse
Try what i told you to do... that error means there is a prblem with the update file, so either it's corrupt or the file name is wrong
HI !
Please ..can you try also ? - press 10 sec. on power ( until the green light closed).... now .. while pres volume down ...press power ( and don't release ) until you will entry in recovery (SDE) ! Now try to do Format System-> Reformat Device-> I Understand -> OK! and wait a while until a new driver appear - > now copy Stock Archos ICS 4.0.5 .aos file into it and flash ! I hope will work this method ! Good luck.
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
svennimann said:
Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
But I have still have a question: Why this happened?
Whats that for a link?
Seems for me that MIGHT be a firmware NOT for our devices ????
Click to expand...
Click to collapse
use this instead
http://update.archos.com/9/gen9/gen9_4.0.5/firmware_archos_it4.aos
Masih60 said:
I hope so man! Now I'm going to download new firmware from: update.archos.com/9/gen9/gen9_3.2.80-2/firmware_archos_it4.aos
Click to expand...
Click to collapse
Which tools do you use for download? I had the same error 221 and then I read somewhere (maybe in this forum) that Mozilla actually recognizes the archive format, unpacks the file for virus check (or whatever else), and then re-packs it. But the original file is digitally sighed by Archos, and the repacked one is not. That is why the updater rejects it. Since that, I did a couple of successful upgrades using the most basic tool, wget, to download the file to my PC first. Try this.
The following seems to be the result of the bad update script. Which version did you start from? Not too old? It looks like the script deleted the existing software first, then checked the new file, and rejected it - and what to do next?
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
use
RECOVEY (ON OFF/ VOL -),
RESET ANDROID via REPAIR SYSTEM and FORMAT SYSTEM.
Install the firmware
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Masih60 said:
Thanks everyone! Thanks so much. I solved my problem and my device go on! And now we can go to second step...
Please check this topic and help me again:
http://forum.xda-developers.com/showthread.php?p=24035091#post24035091
Thanks so much again!
Click to expand...
Click to collapse
Glad to have helped
iourine said:
ps. If someone definitely knows that the above reasoning about download is wrong, please let us know this - not to spread this rumour any longer.
Click to expand...
Click to collapse
Ok, I had time to experiment todaya nd now I do know definitely that I was wrong - at least, for the current version. Downloaded the file a few times by both Mozilla and wget, calculated the checksums - it is identical and successfully recognized by the updater. So the above error is nothing but a spontaneous download error, once it occures - just reload the file. On the other hand, wget is very resilent to transmission errors, so file corruption is less likely while using it.
Related
OK, I wanted to format the internal storage so I Task 29 it.
It told me to hold the volume down button when it reach 99%
Well it stopped at 96% for a while, so I held the volume button down
Now when I turn on the screen, it just shows the loading screen towards that CleanEx rom and nothing else!!!
Bootloader mode only supports disk drive connection to pc so I don't think that's appropriate.
I need help because I am about to give this phone as a gift
THANK YOU IN ADVANCE
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
A new hacker said:
Its um SPL 2.08
HSPLd
CotullaHSPL
for more info
Click to expand...
Click to collapse
have you flash a correct radio FIRST??
geppo1975 said:
have you flash a correct radio FIRST??
Click to expand...
Click to collapse
It was flashed before, the correct one IDk.
A new hacker said:
It was flashed before, the correct one IDk.
Click to expand...
Click to collapse
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
geppo1975 said:
if you're sure to have flashed all properly,than i suggest a new dwld:maybe your file is bad or corrupt?!
Click to expand...
Click to collapse
Can you provide assistance with that? That is a new term to me
A new hacker said:
Can you provide assistance with that? That is a new term to me
Click to expand...
Click to collapse
that's mean your file(rom or radio)in download or upload has lost some parts or file!!You can try to dwld from other server or try again from same...sometimes happens
you task29d, do you even know what that means? it means you formatted your phone there is no rom on it, how can it boot with no rom?
enter bootloader, connect usb, (yes bootloader is fine),, flash a rom.
OK, sorry for the fuss. Now it seems that usb is working but when I try to upgrade the Rom (official) the percentage just stays at 0% and gives some error messages. Please help
A new hacker said:
and gives some error messages.
Click to expand...
Click to collapse
aww c'mon, at LEAST tell us the error
It says [connection] cannot establish (I've done all the things listed)
Error [262] thanks for the assistance
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
- Are you well connected over Active Sync?
- Did you test it on a other USB port?
- Did you temporary deactivated your AntiVirus?
- Try to reset device and pc
- On Windows vista and window 7 don't forget to run RUU_Leo_S_HTC_... as administrator
This are some suggestions that can solved connection problems.
A new hacker said:
Error [262] thanks for the assistance
Click to expand...
Click to collapse
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
timmymarsh said:
Why not extract the nbh file from the downloaded rom, rename it as required (leoimg.nbh but please check on the site, I'm on my phone so you'll have to do that ) place it on the root of ur SD card, go into bootloader and if you take your fingers off the keys at the right time, the rom will flash directly from there.
I have a MAC and flash via SD card all the time
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Sorry for the bad news but can you visit this forum? It has more details and updated news. and i like to emphasize that the usb doesn't work, disk drive or activesync
http://forum.xda-developers.com/showthread.php?t=891115
thread closed now redundant, linked thread continues.
Hello. I'm annoyed
I rooted to get rid of problems... So
I followed these tasks: http://forum.xda-developers.com/showthread.php?t=1653566 and the root worked for a few days - then moved into a boot loop.... how/why... I don't know.
Ive tried many of the different .aos files to find a correct one for my 101g9 250gb, but I still can't get it out of the loop.
This is where I've been getting the different Aos files: http://forum.xda-developers.com/showthread.php?t=1468925
I get 2 different results 1)error 207 (update failed) or 2) boot loop.
One stange thing did happen once - It's managed to reload the android installer, I selected a language, then it crashed again. Of course I tried the same thing again, but it never got past the boot loop again.
After 2 weeks of trying, I'd like some help.
I always have it plugged in. It's not the battery. It's the HDD model and I don't know exactly which version came with the device. I think 4.0.25.. not 100% sure
Please help
I don't have the HDD model so don't know what to tell you exactly..
What I would do on my flash model is boot into recovery. completely reformat the system and use recovery to update the firmware with an Archos firmware (aos file) onto it.
Reformating it from recovery would bring the filesystem back to stock so it should fix anything wierd any of the other roms might have done. So dropping an Archos firmware on it should in theory fix it. Though you WILL lose your root and anything else you have on the drive.
Djirin said:
I don't have the HDD model so don't know what to tell you exactly..
What I would do on my flash model is boot into recovery. completely reformat the system and use recovery to update the firmware with an Archos firmware (aos file) onto it.
Reformating it from recovery would bring the filesystem back to stock so it should fix anything wierd any of the other roms might have done. So dropping an Archos firmware on it should in theory fix it. Though you WILL lose your root and anything else you have on the drive.
Click to expand...
Click to collapse
Thanks for your help, but no luck- that didn't work. I'm sure I lost all my data a long time ago with the amount of reformats I've done. What I'm curious about is, can the tablet actually become a brick just by using these rooted firmwares? I'm assuming that it's fine and that I just have to 'crack to code' to installing the right firmware in the right order.....
I'm still curious if anyone else has had this problem..
Hmm.. Try going back into recovery and try the Reset Android option?
Maybe do Reset Android. Reformat Device. Upgrade Firmware?
The device boots.. so it has to be something causing it.. Have you tried to see if you can use ADB to get into the device and look at any log entries?
Djirin said:
Hmm.. Try going back into recovery and try the Reset Android option?
Maybe do Reset Android. Reformat Device. Upgrade Firmware?
The device boots.. so it has to be something causing it.. Have you tried to see if you can use ADB to get into the device and look at any log entries?
Click to expand...
Click to collapse
ADB? ok, I didn't know what it was. But it's now installed and I followed a random setup on youtube, but when I type ADB devices, nothing comes up.
So now I have it installed, but I so far I can't get win7 to detect the tablet in device manager
Regarless, can the ADB detect problems on the tablet when the archos is only connected waiting for the AOS file (A101H-REC - 299MB)?
Btw, you've already got me waaaaay over my head on this stuff - but still, I'm learning.
pwnami said:
ADB? ok, I didn't know what it was. But it's now installed and I followed a random setup on youtube, but when I type ADB devices, nothing comes up.
So now I have it installed, but I so far I can't get win7 to detect the tablet in device manager
Regarless, can the ADB detect problems on the tablet when the archos is only connected waiting for the AOS file (A101H-REC - 299MB)?
Btw, you've already got me waaaaay over my head on this stuff - but still, I'm learning.
Click to expand...
Click to collapse
Let me join the conversation
Adb works only is it is enabled in developer settings.
What kind of system do you have in use?
In your case i would probably try exporting hdd in sde. This allows you to browse files inside your hdd in linux operating system through usb.
If it is empty, i would export data partition through sde. This allows you to see if there are any files in your data partition.
You said that the device bootloops, yes? That means that the reformat device is not working. It would remove the system, so you shouldnt even see the bootanimation.
Sent from my ME301T using xda app-developers app
julle131 said:
Let me join the conversation
Adb works only is it is enabled in developer settings.
What kind of system do you have in use?
In your case i would probably try exporting hdd in sde. This allows you to browse files inside your hdd in linux operating system through usb.
If it is empty, i would export data partition through sde. This allows you to see if there are any files in your data partition.
You said that the device bootloops, yes? That means that the reformat device is not working. It would remove the system, so you shouldnt even see the bootanimation.
Sent from my ME301T using xda app-developers app
Click to expand...
Click to collapse
Hi, thanks - any advice is welcome. I only have windows7 - Sorry.
As for the bootloop, yes that's the status. I hadn't even considered that the reformatting process wasn't actaully working [but it is] - I reformatted the device and didn't install an AOS. now every restart brings me straight into the Recovery menu [which should happen i assume].
So, with a "clean" but stubborn device, what would you advise to try to isolate the problem? (rather than me simply blindly trying random things)
Thanks
pwnami said:
Hi, thanks - any advice is welcome. I only have windows7 - Sorry.
As for the bootloop, yes that's the status. I hadn't even considered that the reformatting process wasn't actaully working [but it is] - I reformatted the device and didn't install an AOS. now every restart brings me straight into the Recovery menu [which should happen i assume].
So, with a "clean" but stubborn device, what would you advise to try to isolate the problem? (rather than me simply blindly trying random things)
Thanks
Click to expand...
Click to collapse
So reformat works. Have you tried to flash the official 4.0.28(http://update.archos.com/9/gen9/gen9_4.0.28/firmware_archos_it4.aos)?
After searching about your error 207, I found this:http://forum.archosfans.com/viewtopic.php?f=35&t=56037
Code 207 is issued by aosparser when the .aos upgrade file doesn't
pass the signature check.
...
There's more bad news... If the genuine original .aos files are also
giving the same error it means the signing keystore may also have been
damaged.
Click to expand...
Click to collapse
Of course, this is for Archos 5, so hopefully this is not the case.
julle131 said:
So reformat works. Have you tried to flash the official 4.0.28(http://update.archos.com/9/gen9/gen9_4.0.28/firmware_archos_it4.aos)?
After searching about your error 207, I found this:http://forum.archosfans.com/viewtopic.php?f=35&t=56037
Of course, this is for Archos 5, so hopefully this is not the case.
Click to expand...
Click to collapse
Yeah, I've used the aos from the archos site a bunch of times - still no luck. btw, that link to the 4.0.28 didn't work....
by "Flash" I hope you mean install.... not some other random process
pwnami said:
Yeah, I've used the aos from the archos site a bunch of times - still no luck. btw, that link to the 4.0.28 didn't work....
by "Flash" I hope you mean install.... not some other random process
Click to expand...
Click to collapse
Yeah... I just noticed it was broken. And yes, I meant install.
I am sorry, but I'm out of ideas.
Sent from my GT-I9100 using xda app-developers app
julle131 said:
Yeah... I just noticed it was broken. And yes, I meant install.
I am sorry, but I'm out of ideas.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
So, do you know if I can access/use ADB on a win7 pc when the archos doesn't have an aos on it?
http://forum.xda-developers.com/showthread.php?t=2104491&highlight=wlan
You could try this. it's written that it doesn't work on hdd model. but it can't get much worse it think. If I understand things correctly, you don't need to have installed any aos before installing this rom. with other roms you get a archos.ext4.update so you need a running system. yust give it a try but don't blame me if your tablet's completely dead afterwards. i don't know what will happen.
Or you could just follow the steps 1-7 (from link above!) to get cwm, maybe that helps for sth, but i don't know.
sry, but my writing style is bad. and do it on your own risk, I'm not that expirienced but that's what I would do...
Good luck
noaddress said:
http://forum.xda-developers.com/showthread.php?t=2104491&highlight=wlan
You could try this. it's written that it doesn't work on hdd model. but it can't get much worse it think. If I understand things correctly, you don't need to have installed any aos before installing this rom. with other roms you get a archos.ext4.update so you need a running system. yust give it a try but don't blame me if your tablet's completely dead afterwards. i don't know what will happen.
Or you could just follow the steps 1-7 (from link above!) to get cwm, maybe that helps for sth, but i don't know.
sry, but my writing style is bad. and do it on your own risk, I'm not that expirienced but that's what I would do...
Good luck
Click to expand...
Click to collapse
I gave up on this 6 months ago. but I turned it on 2 days ago and it magically worked.... Now, it's back in a bootloop again. Everything was working for two days, except sometimes the HDD wasn't reading the files, or the system wasn't detecting the HDD...
Could the HDD be damaged? If so, is there a way to check if it is (I was thinking about the ssd option)
Hi guys! This thread is for those who want to fix the baseband "XXXX" problem on their Ace 2. You can check your baseband number in "Settings"->"About phone"
If you think it's gonna take too much to do it, just feel free to look for another way to fix your problem, but the way I did it, I didn't have any problems, so it's your decision whether to do it or not.
So let's start:
Charge your battery before this. Use TriangleAway to reset the flashcounter, in case it's increased.
PART 1 (downgrade to GB) (Optional- you could skip to Part 2, but if the problem is still there, then it means the "modemfs" file will work only with this version of GB I uploaded bellow):
1. You have to downgrade to GingerBread, so download this: I8160XXLK6 and extract it.
2. Download Odin: Odin3_v1.83.zip Install your drivers as well, if you don't have them.
3. Turn on USB Debugging mode from "Developer options"
4. Enter "download mode" by long pressing vol down + home + power, then press volume up again when you see the warning screen.
5. Open Odin as admin
6. Connect your phone through the usb cable and wait till the ID:COM section turns yellow.
7. Click on PDA and choose "CODE_GT-I8160XXLK6_CL1211243_REV00_SEC_KEY_LK6_4G.tar.md5" from the extracted archive. For I8160P download this :CODE_GT-I8160P_I8160PXXLK2_CL1211774_REV00_user_SEC_KEY_XLK2_4G and put it at PDA after you extract it.
Click on CSC and choose "CSC_GT-I8160-MULTI-CSC-0XELF1_SEC_KEY_4G.tar.md5". Then click on PIT and choose “GT-I8160_EUR_XX_4G.pit”.
“Re-Partition”, “Auto-Reboot” and “F Reset Time” options have to be selected as well. (tick re-partition if you have a 3 files stock GB; don't tick it if you have a one file stock ROM--- these are the rules)
8. Click "Start" and wait till everything is finished.
9. Configure you device, till you get to the main screen.
10. Download flashable supersu update_su.zip and copy it to the external sdcard.
11. Enter recovery mode (vol up + home + power button), and click on "apply update from sdcard" (or something similar) and choose the "update_su" file
12. Reboot and after that, download "Android terminal emulator" from Google Play Store.
PART 2 (repairing the baseband). The "modemfs.img.md5" file was extracted from a GingerBread ROM so I don't know if would work if you tried to put it on a Jelly Bean. That's why I added "Part 1" above:
13. Download this Ace2modemfs.img.md5.zip and extract it.
14. Copy the extracted file ("modemfs.img.md5") to your sdcard (internal)
15. Now open the "Android terminal emulator"
16. Type in what is between the quotes: "su". Click on Grant (Allow, or whatever)
then "dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2".
17. After that, close the terminal and reboot the phone. Go to settings-> about phone and check to see if you still have baseband "XXXX". if you don't, go to recovery mode and make a "wipe data".
After everything is finished use Samsung Kies to update to JellyBean. This way you'll be sure that you get the correct update.
With the exact same steps from above, I managed to fix my baseband. I'm not 100% that it will work for you too, but I'm 95% sure that it will. So follow the steps carefully and you'll be good.
If someone tried only PART 2 and worked on a Jelly Bean, just tell me and I'll delete the first part, which is basically a tutorial for GB downgrade.
I think that you can just install jb rom and after that from recovery the zip file.
manthes said:
I think that you can just install jb rom and after that from recovery the zip file.
Click to expand...
Click to collapse
What I said above was the method I tried and it worked. I'm sure there are other methods to do that but I haven't tried them cause this one worked for me.
dragos281993 said:
What I said above was the method I tried and it worked. I'm sure there are other methods to do that but I haven't tried them cause this one worked for me.
Click to expand...
Click to collapse
hi i just got your pm i managed to fix this issue after searching for hours using the modemfs files fluffi444/djmaniac posted. id just like to add that going back to stock isn't 100% necessary. i restored a rom backup i recommend copying only the files you dont have in fluffi444 modemfs when i copied the whole modemfs file i kept getting random drops in reception i noticed a certain .cfg file didnt seem to have the correct permissions. hope this maybe useful to people with this annoying issue.
***Big thanks to fluffi444/djmaniac for providing modemfs files***
Thx for your work, dragos..
I think its good to put al this different ways together in one thread, if you don't mind.
For whom, who needs only the MODEM FS via CWM flashable zip you'll find my post on Android-Hilfe here:
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
fluffi444 said:
Thx for your work, dragos..
I think its good to put al this different ways together in one thread, if you don't mind.
For whom, who needs only the MODEM FS via CWM flashable zip you'll find my post on Android-Hilfe here:
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
Click to expand...
Click to collapse
It's better as a "team", of course. This thread was just one way to solve an issue that it's kinda annoying. So, the more solutions, the better.
How do you got this "xxxx" error? Dont wanna to make same mistake. Thanks
nusko_x said:
How do you got this "xxxx" error? Dont wanna to make same mistake. Thanks
Click to expand...
Click to collapse
I think by flashing with Odin a version of Jelly Bean 4.1.2 that wasn't for my phone. I tried to go from MG2 to MF1. I also remember that I managed somehow to format "modemfs" in recovery, so it's one of these two things.
Thanks bro.
nusko_x said:
Thanks bro.
Click to expand...
Click to collapse
No problem, man.
******
dragos281993 said:
Hi guys! This thread is for those who want to fix the baseband "XXXX" ..... GB downgrade.
Click to expand...
Click to collapse
-rom in russian :/
cant continue
update_su.zip ... shows error :/
MODERATORS, PLEASE CLOSE THIS THREAD !!! I've been using a different device for a few months now, so I can't help those who encounter any errors, following my instructions.
before close have find all thet I need
http://www.sammobile.com/firmwares/download/27460/I8160XXNB1_I8160TMSNB1_TMS.zip/
search there are more COMPLETE ZIPS with PDA,CSC,MODEM !!!! not only PDA as common on links in forums like this :/
kjub6 said:
before close have find all thet I need
http://www.sammobile.com/firmwares/download/27460/I8160XXNB1_I8160TMSNB1_TMS.zip/
search there are more COMPLETE ZIPS with PDA,CSC,MODEM !!!! not only PDA as common on links in forums like this :/
Click to expand...
Click to collapse
You spamming many threads with quite confusing remarks, not really readable posts, and more...
Don't expect any help if you writing like this... I suggest that you start to post your questions more structured...
This suggestion is not only for this post - also and mainly for the bunch of post from you during the last few days.
I really tried to help you but refused, after you came up again and again with a changed situation.
Maybe its time to show you what you've done the last days:
http://forum.xda-developers.com/search.php?searchid=322856854
am deeply sorry to whole comunity was not my point to spamm ... but there was no answer and the confusion was big
and when someone can help me I can delete all messages no problem and clean it up ...
imagine how confusing it is when your main phone breaks down .... :/ ... was really hard for me too
once again sorry for this mess
need PHONE md5 to flash my phone to remove baseband :/ xxxxxxx
kjub6 said:
once again sorry for this mess
need PHONE md5 to flash my phone to remove baseband :/ xxxxxxx
Click to expand...
Click to collapse
OK... try this... For CWM...Flashable zip (DJM is me)
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
OR
for ODIN (for PDA) - Ace2Nutzer is a friend
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7902328
OR
Begin from scratch (all data is away) and flash 3-parted GB FW according to your Phone - Do factory reset - After that any JB FW u like.
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
BUT: This is nothing else as the OP said in 1 post actually....
thx a lot the first flashable zip worked excelent ... I made all other recoveries before but no success ... but am not argueing that it was late and I was not concentrates ... so mistakes could had been done ... its possible
thank you for your help
Hey guys i did everything as tutorial says and everything is almost ok. I have baseband name but still no signal
dragos281993 said:
Hi guys! This thread is for those who want to fix the baseband "XXXX" problem on their Ace 2. You can check your baseband number in "Settings"->"About phone"
If you think it's gonna take too much to do it, just feel free to look for another way to fix your problem, but the way I did it, I didn't have any problems, so it's your decision whether to do it or not.
So let's start:
Charge your battery before this. Use TriangleAway to reset the flashcounter, in case it's increased.
PART 1 (downgrade to GB) (Optional- you could skip to Part 2, but if the problem is still there, then it means the "modemfs" file will work only with this version of GB I uploaded bellow):
1. You have to downgrade to GingerBread, so download this: I8160XXLK6 and extract it.
2. Download Odin: Odin3_v1.83.zip Install your drivers as well, if you don't have them.
3. Turn on USB Debugging mode from "Developer options"
4. Enter "download mode" by long pressing vol down + home + power, then press volume up again when you see the warning screen.
5. Open Odin as admin
6. Connect your phone through the usb cable and wait till the ID:COM section turns yellow.
7. Click on PDA and choose "CODE_GT-I8160XXLK6_CL1211243_REV00_SEC_KEY_LK6_4G.tar.md5" from the extracted archive. For I8160P download this :CODE_GT-I8160P_I8160PXXLK2_CL1211774_REV00_user_SEC_KEY_XLK2_4G and put it at PDA after you extract it.
Click on CSC and choose "CSC_GT-I8160-MULTI-CSC-0XELF1_SEC_KEY_4G.tar.md5". Then click on PIT and choose “GT-I8160_EUR_XX_4G.pit”.
“Re-Partition”, “Auto-Reboot” and “F Reset Time” options have to be selected as well. (tick re-partition if you have a 3 files stock GB; don't tick it if you have a one file stock ROM--- these are the rules)
8. Click "Start" and wait till everything is finished.
9. Configure you device, till you get to the main screen.
10. Download flashable supersu update_su.zip and copy it to the external sdcard.
11. Enter recovery mode (vol up + home + power button), and click on "apply update from sdcard" (or something similar) and choose the "update_su" file
12. Reboot and after that, download "Android terminal emulator" from Google Play Store.
PART 2 (repairing the baseband). The "modemfs.img.md5" file was extracted from a GingerBread ROM so I don't know if would work if you tried to put it on a Jelly Bean. That's why I added "Part 1" above:
13. Download this Ace2modemfs.img.md5.zip and extract it.
14. Copy the extracted file ("modemfs.img.md5") to your sdcard (internal)
15. Now open the "Android terminal emulator"
16. Type in what is between the quotes: "su". Click on Grant (Allow, or whatever)
then "dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2".
17. After that, close the terminal and reboot the phone. Go to settings-> about phone and check to see if you still have baseband "XXXX". if you don't, go to recovery mode and make a "wipe data".
After everything is finished use Samsung Kies to update to JellyBean. This way you'll be sure that you get the correct update.
With the exact same steps from above, I managed to fix my baseband. I'm not 100% that it will work for you too, but I'm 95% sure that it will. So follow the steps carefully and you'll be good.
If someone tried only PART 2 and worked on a Jelly Bean, just tell me and I'll delete the first part, which is basically a tutorial for GB downgrade.
Click to expand...
Click to collapse
this was also my problem.but i cannot download the modemfs.img.md5. can you still help me?
royaleperson said:
this was also my problem.but i cannot download the modemfs.img.md5. can you still help me?
Click to expand...
Click to collapse
Sorry buddy, I moved on to a different device a long time ago. Of i remember correctly this guy fluffi had a similar thread. Go check it out.
Sent from my Nexus 4 using Tapatalk
Hey there all fellow XDA members, i have encountered a problem with my p780 8gb, i bought it from Malaysia in the beginning of the year,
this morning i woke up wondering why the alarm didnt go off and saw my phone stuck at the boot screen.
I didnt do anything but update the phone a week ago via the lenovo updater to kit kat, i rooted it in Jelly Bean but didnt do it yet when i updated to Kit Kat, ive tried resetting, clearing cache & it doesnt work, im not too sure what to do but i was thinking of going back to Jelly Bean, if anybody has links to a good rom that will work for me that will be really awesome.
Thank You ! :good:
AndroidLion said:
Hey there all fellow XDA members, i have encountered a problem with my p780 8gb, i bought it from Malaysia in the beginning of the year,
this morning i woke up wondering why the alarm didnt go off and saw my phone stuck at the boot screen.
I didnt do anything but update the phone a week ago via the lenovo updater to kit kat, i rooted it in Jelly Bean but didnt do it yet when i updated to Kit Kat, ive tried resetting, clearing cache & it doesnt work, im not too sure what to do but i was thinking of going back to Jelly Bean, if anybody has links to a good rom that will work for me that will be really awesome.
Thank You ! :good:
Click to expand...
Click to collapse
Here you are. Try this from here: http://forum.xda-developers.com/len...p780-row-s222-140817-flash-flashtool-t2861983
stympy said:
Here you are. Try this from here: http://forum.xda-developers.com/len...p780-row-s222-140817-flash-flashtool-t2861983
Click to expand...
Click to collapse
Thank you Stympy ! is there possibly a guide to do all of this ? So basically you saying i must just reflash it with that rom ? Is that a customised rom with all the unused apps possibly ? Thank You !
AndroidLion said:
Thank you Stympy ! is there possibly a guide to do all of this ? So basically you saying i must just reflash it with that rom ? Is that a customised rom with all the unused apps possibly ? Thank You !
Click to expand...
Click to collapse
Hi there. Flash the ROM for 8 GB. Do not flash that for 4 GB. Usit first. I have 4 GB ROM. Look in Development section.
stympy said:
Hi there. Flash the ROM for 8 GB. Do not flash that for 4 GB. Usit first. I have 4 GB ROM. Look in Development section.
Click to expand...
Click to collapse
Thank you man, im looking at this guide here http://forum.xda-developers.com/lenovo-p780/help/aosp-based-kitkat-rom-lenovo-row-p780-t2850715 , do you think that should do the trick well and proper ? Regards : )
Just a little concerned cause im newb at flashing roms and all on Android, last thing i want to do is brick the phone.
Factory reset and no luck still doing the same thing..... : /
AndroidLion said:
Factory reset and no luck still doing the same thing..... : /
Click to expand...
Click to collapse
there is no way to hard brick this kind of phone.
just try what i show you.
this is trusty.
Here is one example about how to..
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
stympy said:
there is no way to hard brick this kind of phone.
just try what i show you.
this is trusty.
Here is one example about how to..
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Click to expand...
Click to collapse
Thanx Stympy,
So should i flash with the recovery menu or use the sp tool flash ? cause when i plug the phone in it detects but doesnt find the MT driver on windows, appreciate your help man, Regards.
AndroidLion said:
Thanx Stympy,
So should i flash with the recovery menu or use the sp tool flash ? cause when i plug the phone in it detects but doesnt find the MT driver on windows, appreciate your help man, Regards.
Click to expand...
Click to collapse
Use SpflashTool.
Here are the drivers.
stympy said:
Use SpflashTool.
Here are the drivers.
Click to expand...
Click to collapse
Much appreciated once again ! I was looking for a guide to flash and i was wondering if this is a good guideline ? Anything im missing ? Thank you so much man !!!
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
AndroidLion said:
Much appreciated once again ! I was looking for a guide to flash and i was wondering if this is a good guideline ? Anything im missing ? Thank you so much man !!!
Step by step guide to Flash stock rom:
1.If your phone is not already soft bricked, back up whatever you want. External SD card is fine. If your phone is soft-brick then say goodbye to your data and skip this step.
2. Uncompress all the files you downloaded from this thread into a directory where you can remember. Including the ROMs.
3.Shutdown your phone if its not in a bootloop. If it is skip this step.
4.Open "Device Manager" on your Windows PC.
5.Plug in your phone through the micro USB cable. A device will show up for a few seconds in "Device Manager". After that, it will disappear again!
6.Recognize the device tree where it appeared, and wait for it as you unplug and plug in your phone again (if bootloop, its automatic!)
7.Catch it with a right click as it appears! Then choose "Update Drivers" and pick the directory where you uncompressed the drivers you downloaded above. Its ok if after catching it the device disconnects. You only need to install the drivers now.
8.Assuming the drivers are correctly installed, run the Smart Phone Flash Tool.
9.Click on scatter-loading and choose the scatter file "MT6589_Android_scatter_emmc.txt" of the ROM you want to flash.
10.Make sure the checkbox "DL DA All With Check Sum" is CHECKED
11.Click on "Firmware->Upgrade" button.
12.Plug in your powered down phone via the USB cable again. See it flash.
13.When a big green circle appears on the screen, your are done!
Click to expand...
Click to collapse
The tutorial is good.
Good Luck.
stympy said:
The tutorial is good.
Good Luck.
Click to expand...
Click to collapse
Downloading going a little slow but should be done in an hour or so, thanx again stympy, will let you know what happens. Regards
stympy said:
The tutorial is good.
Good Luck.
Click to expand...
Click to collapse
Sorry about the excess of messages stympy, ive downloaded the files but when i enter flash tools it says i must download ? It has also said PMT changed for the rom ?
It works !!! Thank you man !!!
Hey there Stympy, could you possibly tell me, are there different modem drivers for the phone in the file i downloaded ? Cause my 1st sim that works on 3g at 900 mhz doesnt want to work no more. Was thinking of just flashing with the original s124 that you posted a while back http://forum.xda-developers.com/lenovo-p780/general/lenovo-p780-8-gb-stock-rom-s124-140403-t2742170 . Was working more than perfect for me. Regards
AndroidLion said:
Hey there Stympy, could you possibly tell me, are there different modem drivers for the phone in the file i downloaded ? Cause my 1st sim that works on 3g at 900 mhz doesnt want to work no more. Was thinking of just flashing with the original s124 that you posted a while back http://forum.xda-developers.com/lenovo-p780/general/lenovo-p780-8-gb-stock-rom-s124-140403-t2742170 . Was working more than perfect for me. Regards
Click to expand...
Click to collapse
Did you tried all my posted modems in How about some modems post?
Be carrefoul use those modems from folder: Modems for S221 LATEST UPDATE.
Be carrefoul all modems who worked in S123, S124 ar no more working in S214,S221,S222.
You are going to flash them for nothing.
stympy said:
Did you tried all my posted modems in How about some modems post?
Be carrefoul use those modems from folder: Modems for S221 LATEST UPDATE.
Be carrefoul all modems who worked in S123, S124 ar no more working in S214,S221,S222.
You are going to flash them for nothing.
Click to expand...
Click to collapse
Thanx for the reply, i havent seen your post stympy, do you mean if i flash the modems in the folders i downloaded it wont work ?
Is it easy to flash to stock rom ?
Thank You
AndroidLion said:
Thanx for the reply, i havent seen your post stympy, do you mean if i flash the modems in the folders i downloaded it wont work ?
Is it easy to flash to stock rom ?
Thank You
Click to expand...
Click to collapse
This modems are to be flashed from TWRP or CWM.
You cannot flash from stock recovery.
Iff you want to change your stock recovery to custom here are the stock images.
stympy said:
This modems are to be flashed from TWRP or CWM.
You cannot flash from stock recovery.
Iff you want to change your stock recovery to custom here are the stock images.
Click to expand...
Click to collapse
Thanx bud, unfortunately i dont have TWRP or CWM installed or know how to install it.
I see you said if i want to change from stock to custom but you gave me stock images ? Confused
I take it S124 is the ROM before the kit kat update, think i would prefer a stock phone for now, do i just download the stock rom with SP Flash tool, has anything else changed ?
Thank you. Regards
I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
You will be hard pressed as cline devices use a hacked together version of Android and almost never post the files due to copyright lawsuits.
Also xda doesn't deal with knock offs.
ozkanreyes said:
I accidentally used the ROM a rom of the S7 MT6580, to flash my note 7 (Clone) n930f MT6580 with sp flash tool.
Now my phone is stocked at the Android boot logo & sometimes it wont even start. How can I solve this issue or is there a correct ROM for my phone?
Another rom that is suitable is fine to if I can install that without having ADB/download modus on(not possible).
Click to expand...
Click to collapse
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
bricked13 said:
Try to flash it with the stock rom suited for your device. If it does not solve the problem, try to post in a thread related to your device and its problems The thread should have many replies for a higher chance that your question to be noticed by other members.
Click to expand...
Click to collapse
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
ozkanreyes said:
Do you know where I could find the right Rom, I managed to find a "system . img" file. (dont know if it is a right phone, but that one does not have a scatter file in it so don't know how this would work since I don have a working OS to install or use twrp recovery on my phone.
I also discovered a ROM of liniage os that is suitable with my device, but then again I need to have twrp recovery on my device.
ADB and download modus is not possible on my phone unfortunately.
Click to expand...
Click to collapse
I found a here https://mtkfirmware.blogspot.com/2016/11/samsung-note-7-clone-firmware-mt6580.html you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
bricked13 said:
I found a here you should check it out to see if its your rom. Download it then extract. Most of the time the .rar file contains the SCATTER FILE specifically for that rom. But if it doesn't, just google it.
Hit the thanks button if it helped you! :good:
Click to expand...
Click to collapse
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
ozkanreyes said:
This .rar file of this Rom has a password. The password of it is not given.
Do you know it?
Click to expand...
Click to collapse
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
bricked13 said:
Sorry I don't know it. But try these passwords, mtkfirmware.blogspot.com and mtkfirmware. If they don't work. I'll provide you with a new link
Click to expand...
Click to collapse
They don't work. If it is possible to provide me with a new link that would be awesome!
ozkanreyes said:
They don't work. If it is possible to provide me with a new link that would be awesome!
Click to expand...
Click to collapse
Try this. But I dont know if its clone
choose any rom from the site.
https://samsung-firmware.org/model/SM-N930F/
How can I access download modus?
The download modus button is not working anymore. Same applies for adb(both where working before )
I can go to the recovery/fastboot/normal mode, but if I select one of the recovery/fastboot/normal not happens and the phone goes out
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
bricked13 said:
https://drive.google.com/file/d/0B9pNm-PDZG99eFdWUWJUamdtb1U/view
Click to expand...
Click to collapse
This one also has a password!