Related
http://www.androidpolice.com/2012/0...id-4-0-build-3-11-605-22-for-the-htc-rezound/
Not the final but another leak with a new radio. Hopefully this means the OTA is close and im praying we finally get some custom kernels. Wish we could flash the radio seperatly though.
mighty_markus12 said:
Not the final but another leak with a new radio. Hopefully this means the OTA is close and im praying we finally get some custom kernels. Wish we could flash the radio seperatly though.
Click to expand...
Click to collapse
You CAN flash the radio separately... but I believe you still need to lock the phone first and flash the firmware.img file inside a PH98IMG.zip at HBOOT.
a.mcdear said:
You CAN flash the radio separately... but I believe you still need to lock the phone first and flash the firmware.img file inside a PH98IMG.zip at HBOOT.
Click to expand...
Click to collapse
I thought we needed s-off to do that? When the OTA comes i will relock and update then flash a rooted custom rom lol.t
a.mcdear said:
You CAN flash the radio separately... but I believe you still need to lock the phone first and flash the firmware.img file inside a PH98IMG.zip at HBOOT.
Click to expand...
Click to collapse
no point since the radio hasn't changed only a newer build.
mighty_markus12 said:
I thought we needed s-off to do that? When the OTA comes i will relock and update then flash a rooted custom rom lol.t
Click to expand...
Click to collapse
No.. I believe you need S-OFF to flash it from recovery, or to flash it without first re-locking your phone and doing it from HBOOT.
Can we RUU back if there are issues with this build?
Im not updating until this goes final but how do we relock the device? I assume after we upgrade we can unlock again?
dyetheskin said:
no point since the radio hasn't changed only a newer build.
Click to expand...
Click to collapse
You appear to be correct... Even though it does say it includes new radios in the original post, the screenshot clearly shows the same radio versions that I currently have on my phone after updating the radio with con's PH98IMG.zip from the last OTA..
mighty_markus12 said:
Im not updating until this goes final but how do we relock the device? I assume after we upgrade we can unlock again?
Click to expand...
Click to collapse
Yes, you would just have to go through the procedure at HTC dev again to unlock.
to relock in fast boot at a command prompt fastboot oem lock.
and that will relock it .
Sense 3.6? GTFO! I was hoping for 4.0 =[
Sent from my ADR6425LVW using Tapatalk
jimbo.levy said:
Sense 3.6? GTFO! I was hoping for 4.0 =[
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
yep I figured they wouldn't release ever since they announced the one series of phones.
we will not see sense 4.0 because of the HTC One Series phones.
Once those are released, we have a ten fold better chance at seeing sense 4.0..Officially..
we will be getting sense 4.0 as a ROM that's stable and nice, IMO, soon.
So the phone has to be stock, not unlocked..and I can install ics that easy? Any riskz?
Sent from my ADR6425LVW using Tapatalk
a.mcdear said:
No.. I believe you need S-OFF to flash it from recovery, or to flash it without first re-locking your phone and doing it from HBOOT.
Click to expand...
Click to collapse
This is my understanding as well. S-Off is just a "bonus". All other stuff can be done through Fastboot is my belief.
jimbo.levy said:
Sense 3.6? GTFO! I was hoping for 4.0 =[
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
That's what htc said all current phones that get ics will have. Only one series gets 4.0.
Sent from my Kindle Fire using Tapatalk
a.mcdear said:
You appear to be correct... Even though it does say it includes new radios in the original post, the screenshot clearly shows the same radio versions that I currently have on my phone after updating the radio with con's PH98IMG.zip from the last OTA..
Click to expand...
Click to collapse
Just to let u guys know the screenshot is incorrect for whatever reason. I updated to the new leak and it does have new radios. I don't know how to post a screenshot but the baseband version now shows 1.22.10.0310r, 1.22.10.0308r. Also, new PRI version is 1.16_002, 2.07_002.
Land Master said:
This is my understanding as well. S-Off is just a "bonus". All other stuff can be done through Fastboot is my belief.
Click to expand...
Click to collapse
I completely dissagree.
as unlocked is great, as we have root.
s-off is desirebale, and this is why,
with s-off, you can flash radio's in hboot, you can't do that with s-on, you must install the OTA, RUU.
but I do agree that unlocking us is a very good thing, but s-off does have many more benefits.
with s-off we could flash the new ICS firmware, and if you didn't like it flash back to GB OTA.
withs-on, if you flash that "leak" firmware, (or any other firmware, radio,hboot) you are now stuck on them.
The main things I miss from having an s-off phone was these,
1) flashing anything and everything I wanted, I could accept OTA, flash hboots, flash radios, whatever I wanted.
this was thanks to the XTC clip and having s-off.
i miss s-off.
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
rellomar said:
Just to let u guys know the screenshot is incorrect for whatever reason. I updated to the new leak and it does have new radios. I don't know how to post a screenshot but the baseband version now shows 1.22.10.0310r, 1.22.10.0308r. Also, new PRI version is 1.16_002, 2.07_002.
Click to expand...
Click to collapse
hold home + power to take a screen shot, then attach the pic. in a post, by pressing "manage attachments" down below in "additional options"
Has there been any issues with this update? I heard that apps to sd card wasn't working and MMS was having issues sending. Anybody know for sure?
Sent from my HTC Rezound 4G using Tapatalk
andybones said:
I completely dissagree.
as unlocked is great, as we have root.
s-off is desirebale, and this is why,
with s-off, you can flash radio's in hboot, you can't do that with s-on, you must install the OTA, RUU.
but I do agree that unlocking us is a very good thing, but s-off does have many more benefits.
with s-off we could flash the new ICS firmware, and if you didn't like it flash back to GB OTA.
withs-on, if you flash that "leak" firmware, (or any other firmware, radio,hboot) you are now stuck on them.
The main things I miss from having an s-off phone was these,
1) flashing anything and everything I wanted, I could accept OTA, flash hboots, flash radios, whatever I wanted.
this was thanks to the XTC clip and having s-off.
i miss s-off.
Click to expand...
Click to collapse
Thanks for clarifying this. So what you are saying is even with the MainVer "fix" (setting to low) we can't flash a GB RUU after we flash an ICS RUU?
If so then I was misinformed or interpreted my research improperly. I was under the impression that we could still do whatever we wanted even though doing so might require additional steps.
TIA
Edit: Apparently this is looking bleak. Doesn't appear as if you can downgrade the RUU. This was apparently tried unsuccessfully as discussed in the Scott's Rom thread. Really sucks and is a great reason why S-off is needed. Not that you would want to downgrade but this is MY phone dammit'.
Edit 2: Good News. Scrosler just flashed back to a GB Rom and had no issues other then the "SD Card" issue which he stated was an "easy" fix. This still doesn't allow for a radio downgrade but apparently the new radios are still compatible with the GB ROM's. LINK
So my ReZound is getting way too hot and there are so many different threads with different opinions.
I just want a straight and bold answer...
Verizon care or not if the phone says Re-Locked?
Will I get in trouble or what?
Why take the chance ? Run the release update , then relock and no way in hell would they know . I returned four phones already and not once have they said any thing
Sent from my ADR6425LVW using xda app-developers app
Kratz17 said:
So my ReZound is getting way too hot and there are so many different threads with different opinions.
I just want a straight and bold answer...
Verizon care or not if the phone says Re-Locked?
Will I get in trouble or what?
Click to expand...
Click to collapse
They do not care. I've returned one no issues.
jmichaels1982 said:
Why take the chance ? Run the release update , then relock and no way in hell would they know . I returned four phones already and not once have they said any thing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm S-Off too. So just run the latest gb ota. Then s-on and relock.
In that particular order or...?
do Not not not not lock with jumper hboot. Run the ruu twice , the official gb one , that will restore your hboot , then relock , easy process will save you potential headaches
ask not what your developer can do for you, ask what you can do for your developer.
Yea all you gotta do is RUU back to GB then your fine you don't need to relock because the RUU does that. You can also leave it S-OFF because some are like that anyways I left the one I sent back S-OFF.
Also you only need to run the RUU once as long as when it's done all the items say "ok" next to them.
Sent from my Sense 4 ICS Rezound
Ok thank you guys I'm gonna do that
Let's say your on the latest leak and need to send in for warranty will the s- off process work on that leak?
Sent from my ADR6425LVW using xda premium
so far all of the hboots and ruu are exploited so yes, even with the lates ics leak ( not sure about .13 though , but mine was on the .10 leak ). so s-off , ruu to gb then s-on , I CAN NOT EMPHASIZE HOW IMPORTANT IT IS TO ONLY S-ON AFTER YOU PUT BACK THE STOCK H-NOOT
jmichaels1982 said:
so far all of the hboots and ruu are exploited so yes, even with the lates ics leak ( not sure about .13 though , but mine was on the .10 leak ). so s-off , ruu to gb then s-on , I CAN NOT EMPHASIZE HOW IMPORTANT IT IS TO ONLY S-ON AFTER YOU PUT BACK THE STOCK H-NOOT
Click to expand...
Click to collapse
+1 but you really don't need to S-ON to return it.
Sent from my Sense 4 ICS Rezound
How are we supposed to s-on after running an ruu? Is there another way to do it besides the write secureflag command; I thought stock, locked hboot's don't accept fastboot commands?
Sent from my ADR6425LVW using Tapatalk 2
yes it does
DbZ Gokuu said:
How are we supposed to s-on after running an ruu? Is there another way to do it besides the write secureflag command; I thought stock, locked hboot's don't accept fastboot commands?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
it does accept commands, just not all of them, this one does accept the write secure, try it, it never failed me.
If I'm S-On and on the latest ICS RUU, I can't RUU to gingerbread without S-Off, right? Is the safest thing to do to just install a stock gingerbread rom with some sort of patch?
Edited to add: I'm also on the 2.25 Hboot, which I can't S-Off from, right?
As long as your just returning it to Verizon just flash a stock rom or ruu and they won't notice/care. If you ever had to warranty it with htc though I would lock it down and return the whole phone to normal.
Man, this is good news. I have a hardware issue but I thought that being unlocked meant I'm screwed. I'll run the GB RUU to clear any evidence of being unlocked and request my warranty replacement.
hello guys i am s-on...have unlocked the bootloader(i know how to re-lock) and running buisness sense 4 rom....in juopunutbear guide said that i have to be fully stock...can i revert so i can proceed with s-off!
i have used awesomerecoverytoolv2 and have created and PH98IMG of latest official global ruu..if i relock bootloader and flash this will work?i am not doing it as i will wait some proper answer..the phone is new and don't want to damage it
Run a 3.14.605.12 RUU. You will then be on the OTA firmware and rom. The Global isn't official btw. Shouldn't had to unlock your bootloader in the first place.
i am downloading now...i just have to put the PH98IMG.zip and run it on the hboot...and then i will revert to stock?
Djmk4 said:
i am downloading now...i just have to put the PH98IMG.zip and run it on the hboot...and then i will revert to stock?
Click to expand...
Click to collapse
Pretty much
Sent from my ADR6425LVW using xda app-developers app
jon7701 said:
Pretty much
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
hmm to make it clear..as i have to be sure...i am running sense 4 custom rom now...only update the img on hboot..and all gone?
Djmk4 said:
hmm to make it clear..as i have to be sure...i am running sense 4 custom rom now...only update the img on hboot..and all gone?
Click to expand...
Click to collapse
Yup. If you need your full hboot commands back reflash the 2.25.2525 JB hboot after the RUU. If you want COMPLETELY BONE STOCK keep the stock hboot and s-on. Keep in mind you will want to backup your internal sd as I am pretty sure it will be wiped.
Snuzzo said:
Yup. If you need your full hboot commands back reflash the 2.25.2525 JB hboot after the RUU. If you want COMPLETELY BONE STOCK keep the stock hboot and s-on. Keep in mind you will want to backup your internal sd as I am pretty sure it will be wiped.
Click to expand...
Click to collapse
if i only use the img of the 3.14.605.12 ruu..then i can proceed with s-off?
Djmk4 said:
if i only use the img of the 3.14.605.12 ruu..then i can proceed with s-off?
Click to expand...
Click to collapse
Misread your OP a touch, thought you were already s-off. .Since you have already obtained and flashed the Global leak all you need is a deodexed & rooted 3.14.605.1x rom & the JB S-off 2.25 installer. PM Izzaeroth for a download link for the rom.
Snuzzo said:
Misread your OP a touch, thought you were already s-off. .Since you have already obtained and flashed the Global leak all you need is a deodexed & rooted 3.14.605.1x rom & the JB S-off 2.25 installer. PM Izzaeroth for a download link for the rom.
Click to expand...
Click to collapse
hey mate give me some info.... the jb s-off 2.25 installer what it is?still need to do the wire trick?please help!
http://www.unlimited.io/juopunutbear.htm
Would still have to use the wire trick.
PS: I used CleanRom about 6months ago.
Have you looked at the instructions from the s-off thread?
Edit: didn't see 2nd page.
Sent from my ADR6425LVW using xda app-developers app
Any updates dj?
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
In some strange way flashed the stock global ruu..I'm stock only rooted and the phone works..in lockscreen says that I have unknown sim but It works with my networks I can make calls..etc...now is the problem!!!!!!!!!..going for s off when i run programm for s-off(don't remember name something with bear) it starts and says adv reboot bootloader, the phone boots into bootloader and then the programm writes rebooting boatloader in the next line fastboot and count until 60 when the count stops it says rebooting bootloader failed...any help?I have uncheck the fastboot from settings and Check USB debugging!!!
Sent from my ADR6425LVW using xda app-developers app
UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound
Support thread for the community
Note: This is the official support thread for my ROM UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound. If you are having trouble and need a little help, this is the place to ask questions. DO NOT post your question in my ROM's thread in the development section. Post them here.
Please consider checking the Frequently Asked Questions section for my ROM first to see if there is an answer for your question. If there is not, then by all means feel free to post your question!
Click to expand...
Click to collapse
Thanks in advance to the users of my ROM who may also help out answering questions that get posted in this thread
Original question
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing.
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Reply
I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot. Don't try that until we can get a better answer though. Lets move this question over to the support thread.
Sent from my ADR6425LVW using xda app-developers app
zkrp5108 said:
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
darkghost568 said:
Yep. That's the newest HBOOT.
Click to expand...
Click to collapse
zkrp5108 said:
So how do I go about updating the baseband versions
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
wildstang83 said:
Q6
Click to expand...
Click to collapse
zkrp5108 said:
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Like I was saying, I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot.
So if you download the RUU and open it up with an archive manger like 7Zip you can see a bunch of files:
adsp.img
android-info.txt
boot_signed.img
dzdata_16g.hdr
dzdata_16g.img
hboot_8x60-lte_2.27.0000_120803_MR2_signedbyaa.nb0
mdm9k.img
mdmrcdata_3.01_002.img
pg2fs_spcustom.img
radio.img
ramdisk.img
rcdata_1.16.002.img
recovery_signed.img
rpm.img
sbl1.img
sbl2.img
sbl3.img
splash1.nb0
system.img
tp_atmel224e_1101.img
tz.img
I think your supposed to remove everything but android-info.txt and radio.img and just close the zip, rename it to PH98IMG.zip and flash in HBOOT. I'd rather you not do this though until someone gives us a better answer as I rarely mess with radios and such. Things are quite a bit different than what they were on the Incredible.
Right on
Sent from my ADR6425LVW using xda app-developers app
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
rghart09 said:
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
Click to expand...
Click to collapse
Hmm, yea that is definitely not normal and isn't a known bug, with this Rom at least. I'm assuming your Rezound is on the very latest firmware and you have followed the install instructions perfectly right? Are you using other kernels with this rom and thats what causing the problem, or does it do it on the stock kernel as well?
EDIT: Also does the bug continue if a different launcher is used like Apex, Nova, Launcher Pro or ADW EX?
I am s-off I am going to do an ruu and see if it is fixed. I have tried multiple Roms including yours ,shrike's, and Neo's, each with the kernel the ROM comes with. I had shrike's pacman for a while and it never had this issue.
Hboot-2.27.00 I'm sorry but where do I find the firmware info? Or does the hboot suffice?
Settings / About phone / Baseband version. Also I asked about the launcher. Does using a different one fix the problem?
Sent from my SCH-I605 using Tapatalk 2
The baseband version is 2.22.10.0801r, 2.22.10.0803r
I installed apex and it acts the same.
Sent from my Nexus 7 using Tapatalk 2
The only other reports I can find related to your issue were caused by defected screens on certain devices. The cause is slight screen lift at the top. The effect would be the Status bar could not be dropped down, could only sometimes be dropped down, or could be dropped down most of the time with a minor issue getting the shade to pull down ever so often. I'd suggest RUUing back to stock and if the issue is still there, send the phone in for repair or replacement.
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
hollisjamison said:
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
Click to expand...
Click to collapse
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
KnightDavid said:
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
Click to expand...
Click to collapse
Figured it out, you have to relock your bootloader to install RUUs. Just installed the RUU... S-OFF next, then install CM 10.1
zkrp5108 said:
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Hoping someone will know...
Sent from my SCH-I605 using Tapatalk 2
What are the benefits of the newer radios?
Battery life better signal strength global calling
Sent from my ADR6425LVW using xda app-developers app
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
rghart09 said:
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah that is good to see. Very happy it worked for you
okay, i can't seem to get the RUU to actually update and install for some reason, i dloaded it, checked the MD5 and renamed it. all it will do is recognize it, check it. and then stops there anyone able to point me to an instruction set (already tried and Dloaded Wildstang's)
Do I need to update radios? What is the benefit of updating radios, RUU's, etc.
Sent from my Infected Rezound using xda app-developers app
gleggie said:
Do I need to update radios? What is the benefit of updating radios, RUU's, etc.
Sent from my Infected Rezound using xda app-developers app
Click to expand...
Click to collapse
latest RUU is 4.03.605.2 which i think has 2.22.10.0801r, 2.22.10.0803r
with 2.27 Hboot which you can check by going into bootloader
im not a radio genius. So someone correct me if I'm wrong
but check the rest of your "about phone section" for RUU information
4.03.605.2 is the newest radio just google i and you will find it. I use this one and I think it has more stable 4G signal,
Be advised that 4.03.605.2 is a Leak. Since you are s-on if you flash the global leak you will not be able to take any official OTAs.
I would use the official RUU which will update you and then take the OTA that just came out a couple weeks ago. Find the RUU here:
http://androidfiles.org/ruu/?dir=Vigor
It's the top one, 3.14.605.12
Then if you are not happy with your reception you can always go up to the global leak if you want, you just can't go back down to a lower version without s-off.
Before you do this back up everything you need as this will wipe your phone and put it to factory stock.
You need to relock your phone to run it:
fastboot oem lock
And then you'll need to unlock again and flash Amon Ra before flashing a custom ROM again.
Question about "build"
feralicious said:
Be advised that 4.03.605.2 is a Leak. Since you are s-on if you flash the global leak you will not be able to take any official OTAs.
I would use the official RUU which will update you and then take the OTA that just came out a couple weeks ago. Find the RUU here:
http://androidfiles.org/ruu/?dir=Vigor
It's the top one, 3.14.605.12
Then if you are not happy with your reception you can always go up to the global leak if you want, you just can't go back down to a lower version without s-off.
Before you do this back up everything you need as this will wipe your phone and put it to factory stock.
You need to relock your phone to run it:
fastboot oem lock
And then you'll need to unlock again and flash Amon Ra before flashing a custom ROM again.
Click to expand...
Click to collapse
So, this build number is confusing me. This is what I presently have and I'm not sure how I got here
Baseband 2.22.10.0801 /....803
Hboot 2027
Build 1.11.401.110
Seems like everyone else with this radio combo is on build 4.03 or something like that.
Is there any advantage to me upgrading to that build? I am S-Off and hate the prospect of relocking or having my internal SD wiped if I don't have to go through that.
Build number has nothing to do with firmware. It's set by the ROM. You're already on the global firmware.
shrike1978 said:
Build number has nothing to do with firmware. It's set by the ROM. You're already on the global firmware.
Click to expand...
Click to collapse
Thanks. I can sleep now.
Is there a rooted version of the RUU? I'm relatively new to locking and unlocking my device so I'm not sure if I'm ready to do all that by myself. (a friend helped me root my device in the past)
gleggie said:
Is there a rooted version of the RUU? I'm relatively new to locking and unlocking my device so I'm not sure if I'm ready to do all that by myself. (a friend helped me root my device in the past)
Click to expand...
Click to collapse
Ruu takes away root when you flash it. But you can re root in custom recovery
Sent from my ADR6425LVW using xda app-developers app
bunchies said:
Ruu takes away root when you flash it. But you can re root in custom recovery
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I thought i read somewhere that there are custom RUU's that are built specifically for root users but i guess not.
Oh I've never heard of that befor. You may be thinking of the option of downgrading hboot for s-off users
Those are flashed the same way like ruu's
Sent from my ADR6425LVW using xda app-developers app