I am unable to tether with my device. Rooted using RUU that was released a few weeks back. Is there a specific version of the google wifi tether to use? What version is working for ya'll?
Thanks
I use the stock rooted device. Have not updated as of yet. Tethering works well but have not tried google WiFi tether. I just go to settings, enable tethering from the wireless section and it works reply well.
Sent from my HTC PG09410 using XDA
Oh, I didn't try a stock tether. I will try in a few after work and report back.
I don't see the tethering app.
What is it called?
I think it was removed? I Have no hotspot app from att
I enabled tethering and WiFi hot spot in build.prop after which in settings tab under WiFi settings, it appeared as such. Will reconfirmed exact lines to edit.
Edit: line 25 and 26 in build.prop
25 ro.wifi.hotspotUI=1
26 ro.tether.denied=false
These are the 2 lines which I had changed. On doing that, it shows the settings under WiFi settings tab. Unable to upload any pics to show you but I hope you can trust my word for it. Will upload once I am able to.
Sent from my HTC PG09410 using XDA
Here are the screenshots I promised.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTC PG09410 using XDA
Right.
When I edit the build.prop in Root explorer's text editor and save it, it actually doesn't save.
It goes back to 0, true.
arg?
Read only.
how to mount as writable?
got it. thanks
Yes, mount as writable using root explorer, edit the file, save it and then reboot, it should work after that. I am sorry. Had assumed you might have already made the changes to the build.prop and I had forgotten that I had edited it for this functionality.
Edit: to mount as writable, use root explorer, you will find a button on top left side of screen saying r/w or r/o. Click the button till the file opens with text editor.
Sent from my HTC PG09410 using XDA
Did it work?
Sent from my HTC PG09410 using XDA
kailashpchhabria said:
Did it work?
Sent from my HTC PG09410 using XDA
Click to expand...
Click to collapse
Indeed!
thanks,
François
Related
www(dot)swypeinc(dot)com
does this work on legend? it doesnt on mine but may be because needs to be rooted to work, the demo works and ive got it switched on for text input but doesnt actually use swype in texts or anything.
anyone else tried this?
It's working, even without root.
http://forum.xda-developers.com/showthread.php?t=660206
Maybe you have to google for a newer version.
It's working here also nicely. Using the open beta. Just wishing for more language packs, like German and Indonesian.
I s/l it and have it selected as the keyboard, but it won't come up as the keyboard.... am I doing something wrong?
-------------------------------------
Sent via the XDA Tapatalk App
Not working in my legend also
Sent from my HTC Legend using XDA App
The beta works flawlessly for me so far.. Make sure to enable it in your input options. Takes a bit to get used to and I definitely recommend finishing the tutorial (and I'm not a tutorial kinda person) and even reading the tips. It's wicked once you get used to it.
The keyboard will appear as below when properly enabled.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
brad2332 said:
I s/l it and have it selected as the keyboard, but it won't come up as the keyboard.... am I doing something wrong?
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
sorry for the late reply guys, it does work on legend. once you have selected it under keyboard settings. when you go to a text message for example do a long press in the text box and it will say change input method. change this to swype
smartvinu said:
Not working in my legend also
Sent from my HTC Legend using XDA App
Click to expand...
Click to collapse
once youve activated it under settings, go to a text and do a long press and hold in the text box and change input method will come up. select that and change it to swype
Hi all, okay so I had an X10 mini and brought an X10 on ebay, swapped my sim over and immediatly wanted a few apps installed but when it came down to it, I actually have NO option for data traffic in my 'Mobile Networks' section of the phone, surely this isn't right? Anyone experienced the same thing or anyone know of a solution or resolution for this problem?
Sent from my X10i using XDA App
This?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eah that's how mine looks, however I've got no net, ve been on the phone to orange and they don't know why? Should it look like that then?
Sent from my X10i using XDA App
MMS and data!? This is internet connection! !! I don't really get your problem...
Have you run the "Auto internet settings" wizard?
I am unlocked and debranded but I do not get the option to set the auto Internet setting option
any clues?
Your apn settings could.be wrong
Sent from my X10a using XDA App
What network are you on? Data is enabled there, you probably don't have the APN for it is all.
Casianm, correct I didn't have the correct apn settings. Thanks all sorted now.
Sent from my X10i using XDA App
Rockjock007 said:
I am unlocked and debranded but I do not get the option to set the auto Internet setting option
any clues?
Click to expand...
Click to collapse
Are you also on the last update? 026? Some of the option were fixed in later updates.
I don't have any "APN" settings, and the "Auto Internet Settings" is not highlighted as is in the screen shot above. I'm on T-Mobile UK, and was wondering where I'd be able to obtain the "APN" settings, or for some kinda fix for this issue. Thanks
Nimche said:
Are you also on the last update? 026? Some of the option were fixed in later updates.
Click to expand...
Click to collapse
Yes I am. I even tried a sim from europe and no joy.
how do you take screenshots on vibrant?
ShootMe
Sent from my Vibrant using the XDA app.
Or if you have ADB installed, you could run ddms.bat (from the tools folder I believe is where it's at) to capture a screen shot. You must have USB debugging enabled also.
what adb
eweo911 said:
Or if you have ADB installed, you could run ddms.bat (from the tools folder I believe is where it's at) to capture a screen shot. You must have USB debugging enabled also.
Click to expand...
Click to collapse
i am rooted but i dont know what ADB is?
Theres an app for that its called screen shot it download it and it will give you options to keep the app on your tool bar up top on your home screen
The guy on the couch
The guy on the couch
You're probably better off just downloading one of the programs these guys are telling you about then. They will all get the job done for you.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The guy on the couch
The guy on the couch
The first one I had to throw in the xda in the corner cause I love this site!!!!
The guy on the couch
Drocap2 works for me
Sent from my SGH-T959 using XDA App
If you are already rooted, shoot me from the market works really well as a previous poster stated. I have no experience with the other apps.
Sent from my SGH-T959 using XDA App
Shoot me it is ty
Sent from my SGH-T959 using XDA App
Shagman68 said:
ShootMe
Sent from my Vibrant using the XDA app.
Click to expand...
Click to collapse
what he meant was a program called "ShootMe"
and you gotta be rooted.
Confused
My vibrant is taking random screenshots of my phone. I will be doing something random like texting or surfing online and I will hear a click from the camera. The bottom of my screen will say screenshot saved. I dont know what I am doing to cause this. Sure there is times I would like to take a screenshot if I knew how it worked, but these are so random. I am running 2.2 and have not installed any apps for that function
I cleared my wallet and everything and after it says its unsupported it doesn't open .any help would be greatly appreciated
Sent from my EVO using XDA
Dude not for nothing but you need search just a little bit. We only have like 25 threads on google wallet and it not working.
I tried searching but can't find my exact problem . I know after rooting it says unsupported device etc. But mine now says device not certified etc.
Sent from my EVO using XDA
I had this same problem. You need to open your build.prop file and change 3 lines to GT-I9300. I made the changes yesterday, and my Google card is working just fine now.
I'm not rooted - now all of a sudden today wallet says my carrier or device is not supported. No idea what happened.
Sent from my SAMSUNG-SGH-I957 using Tapatalk 2
Google Wallet Team knows about this, a fix is coming.
It'd be nice if Google made people aware but still,
Please search people.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVO LTE
its in just about every google wallet thread.. here is one that is all about it lol
http://forum.xda-developers.com/showthread.php?t=1711204
EarnyBaller said:
I tried searching but can't find my exact problem . I know after rooting it says unsupported device etc. But mine now says device not certified etc.
Sent from my EVO using XDA
Click to expand...
Click to collapse
man im having the same problem. my evo is not rooted or anything. i just came from the Gnex and its rooted but i didnt think you had to clear the settings on that phone for wallet. but now when i try to get into the app its saying that google wallet has not yet been certified in your country or on your device/carrier...sucks
Google disabled it on the LTE. Nothing you can do unless you root and change your build prop
Sent from my EVO using xda premium
Anyone else have this message? I've had my Wallet account set-up, prepaid card and the free $10 added. I went to clear my settings just now and this popped up.
Notes: The phone is completely stock. Not rooted/Not unlocked.
Also, How can I clear the Wallet settings to unlock, if I can't get to the screen to clear them?
Not another thread. This is out of control.
Sent from my EVO using XDA
I am assuming you didn't bother to check any of the other Google Wallet threads.
Like this one or this one.
StormMcCloud said:
I am assuming you didn't bother to check any of the other Google Wallet threads.
Like this one or this one.
Click to expand...
Click to collapse
I searched, And found lots of people with problems not being able to add a card, or rooted users having the "unsupported device" message. This appears to be different?
EDIT: I'm an idiot. Added the word "certified" to my search and came up with results. My bad.
Google Wallet fix:
Use at your own risk... I'm not responsible for any damage to ur phone.
You need a file explorer that can change read/write permissions, I use root explorer.
I cleared Google wallet from settings, apps, all apps, select wallet. I cleared all and cache.
Open your file browser, system and find build.prop
Make sure to set file browser to read/write, on top of screen with root explorer.
Select build.prop with long press, open in text editor.
I've included photos, change lines lines 13 & 64 only. Make ur 2 lines like what my photos show... Read carefully....
ro.product.model=
ro.product.device=
to both equal this: GT-I9300
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Save while exiting out of build.prop, go to super user settings. Turn super user off.
Reboot phone.... Test Google wallet to see if works, better use wifi to register first time, takes time to configure....
I turned super user back on after getting wallet working.
Worked for me, let me know or pm me questions.
I don't claim to be the one who figured this out, worked for me, trying to help others.
I did this and it worked great thanks. I also went back to stock. ro.product.model= htc_jewel then ro.product.device= jewel. So what I did was just changed jewel to htc_jewel saved. Tried it and it worked. Omg I love myself.
Sent from my htc_jewel using xda premium