I've a Samsung Galaxy S II GT-I9100G. Now, I want to replace it.
I've unrooted it.
I've bought the USB JIG for GT-19100.
Now, I used that jig to reset that counters (3 for me) but it doesn't work - It does proceed to the Download Mode but doesn't do anything.
Now, my doubts are:
WHAT THE HELL SHOULD I DO TO REPLACE IT?
Is the USB JIG is different for the G variant?
Do I need to root first?
Is there anyone with the I9100G who has successfully reset the binary counters?
AND THE MOST IMPORTANT
What to do now!
Information about my Indian I9100G:
Model Number: GT-I9100G
Android Version: 2.3.6
Phone Code: GT-I9100GLKGINU
Firmware Versions:
PDA: I9100GXWLA1
Phone: I9100DDKL1
CSC: I9100GODDKL1
Kernel Version: 2.6.35.7
[email protected]#2
Its weird that the jig doesn't work. My best bet is that you should flash an ics rom and then use chainfires triangle away app to clear the binary.
Sent from my GT-I9100 using Tapatalk 2 Beta-4
I've found the solution
Thanks for trying to help me.
But for guys who are experiencing problems in resetting binary counters, here is the SOLUTION
Removing Binary Counter using USB Jig
Binary can only be removed using USB Jig which can be bought from online shop or local shop if applicable
So far only old bootloader (KJ2 and lower) can be used for removing binary binary counter
If running newer than KJ2, for example KL3 and above, you need to flash back the old bootloader for the USB Jig to work again
Normally, to use USB Jig, just turn off the phone and plug the USB jig. Done
Download the attached i9100g-reset-binary-counter.zip and extract to get tar file. Password : mahadirlab-reset-b001 (Credit to Mahadir Ahmad)
Using Odin, just replace the PDA file with this provided tar file
Do not use PIT file and start the flashing
Now you can use the USB Jig just like mentioned above
-----------------
Thank Me If You Liked My Work
Thanks
This worked for me, thanks
Triangle away question
Has anyone tried triangle away on i9100G?
abcdjdj said:
Has anyone tried triangle away on i9100G?
Click to expand...
Click to collapse
Ya, a lot...but it seems that it doesnt work on it
Sent from my GT-I9100 using Tapatalk 2
Triangle away app works only with exynos+ICS
Sent from my GT-I9100G using Tapatalk 2
hi a question
Paras Lehana said:
I've a Samsung Galaxy S II GT-I9100G. Now, I want to replace it.
I've unrooted it.
I've bought the USB JIG for GT-19100.
Now, I used that jig to reset that counters (3 for me) but it doesn't work - It do proceeds to the Download Mode but doesn't do anything.
Now, my doubts are:
WHAT THE HELL SHOULD I DO TO REPLACE IT?
Does the USB JIG is different for the G variant?
Do I need to root first?
Is there anyone with the I9100G who has reset the binary counters?
AND THE MOST IMPORTANT
What to do now!
Information about my Indian I9100G:
Model Number: GT-I9100G
Android Version: 2.3.6
Phone Code: GT-I9100GLKGINU
Firmware Versions:
PDA: I9100GXWLA1
Phone: I9100DDKL1
CSC: I9100GODDKL1
Kernel Version: 2.6.35.7
[email protected]#2
Click to expand...
Click to collapse
Do you need to reset Custom binary download to fix an issue with the firmware i kinda messed up mine trying to root it-
I just managed to reset my binary without using usb jig or any aditional bootloader.
Stock rom 4.1.2 +Root+Triangle away=sucess
Note :
I hv tried previously same method on ics &cus rom but fail
Sent from my GT-I9100G using xda app-developers app
Solution 100% working for Reseting the counter .
nainaabd said:
I just managed to reset my binary without using usb jig or any aditional bootloader.
Stock rom 4.1.2 +Root+Triangle away=sucess
Note :
I hv tried previously same method on ics &cus rom but fail
Sent from my GT-I9100G using xda app-developers app
Click to expand...
Click to collapse
Thanks Mate > Your advice did worked successfully Without using USB JIG .
Method : i9100GXXLSR Rom ( Sammobile ) 4.1.2 Stock
: Rooted with SU-BB-Installer.zip ( rooting process follow asper instructions available )
Updated trangle away .apk (Ver. 2.90) download and install
Run Trangle away > Done
We can revert back 4.1.2 stock binary once again to make it factory default handset , There no More Custom binary count !
Thanks
Related
I've a GT-I9100G with 3e recovery. Tried the old bootloader from Intratech's thread. But Odin failed (see image). I got it working by flashing the stock bootloader.
So here I assume old bootloader isn't compatible with I9100G, right? I've searched but everyone is pointing to the same bootloader used for I9100. While none of the G's owners reported back their success (or failure).
Any other ideas on how downgrade to be able to reset counter with a jig?
phone details
PDA: I9100GJPKH8
PHONE: I9100GDZKH5
CSC: I9100GOJPKG7
An i9100 is not a i9100G and they have different firmwares so the bootloader is also different.You could try and reflash an older firmware until there is and older flashable bootloader.Although once the new bootloader is set i dont know if its changable.If you know what older firmware you need I could look for it.
yea figured that pretty much. However the phone came loaded with the mentioned firmware. I tried to figure which firmware was compatible with it but no luck.
Any idea, resource or list one could look into? and how much old of firmware should one try to get the 2e recovery? I read somewhere that 3e was introduced on Android v2.2
Thanks cooza. I hope someone could point me to the right direction on this one.
redhams said:
yea figured that pretty much. However the phone came loaded with the mentioned firmware. I tried to figure which firmware was compatible with it but no luck.
Any idea, resource or list one could look into? and how much old of firmware should one try to get the 2e recovery? I read somewhere that 3e was introduced on Android v2.2
Thanks cooza. I hope someone could point me to the right direction on this one.
Click to expand...
Click to collapse
its quite possible that the G-series being released after the i9100 international came with the new bootloader pre-installed from the factory and that will be why its so hard to find a solution.I can only guess that in time with new firmwares someone will be able to find a way to make the old i9100 bootloader compatable with the newer series phones like the G,M and T galaxies and hopefully it will be Odin flashable to help other owners out.
Pls help
cooza said:
An i9100 is not a i9100G and they have different firmwares so the bootloader is also different.You could try and reflash an older firmware until there is and older flashable bootloader.Although once the new bootloader is set i dont know if its changable.If you know what older firmware you need I could look for it.
Click to expand...
Click to collapse
Hi Mate,
If you could help i will be greatful?
I am trying to get my jig to work and reste my binary but no luck.
What you would segest to use as old firmware to get the USB Jig work?
I am back to XWKE7 and nothing is happening? it does somehow work on the Si9000 which i beleive they are the same Jig?
Please help or direct as i've tried everything.
Cheers,
sorry to bumping old thread..
i reset my counter with flash back with ODIN.
just flash PDA with stock DZKI1
no need pit and no need repartition..
after that just flash any rom and i can use USB Jig to reset the counter..
Here is a patch for the i9100g.
It is the bootloader from firmware DZKJ2.
View attachment i9100g_jig-patch.tar
Use ODIN and flash this file with checked bootloader option.
Then you can use JIG to reset the binary counter.
I've a GT-I9100G with 3e recovery. Tried the old bootloader from Intratech's thread. But Odin failed (see image). I got it working by flashing the stock bootloader.
So here I assume old bootloader isn't compatible with I9100G, right? I've searched but everyone is pointing to the same bootloader used for I9100. While none of the G's owners reported back their success (or failure).
Any other ideas on how downgrade to be able to reset counter with a jig?
phone details
PDA: I9100GJPKH8
PHONE: I9100GDZKH5
CSC: I9100GOJPKG7
Click to expand...
Click to collapse
Check whether 'triangle away' app by chainfire is compatible with i9100G
Sent from my GT-I9100 using Tapatalk
Resetting Binary Counters GT-19100G INDIAN
Thanks!
Thanks a lot buddy..
mdtxoom said:
Here is a patch for the i9100g.
It is the bootloader from firmware DZKJ2.
View attachment 916637
Use ODIN and flash this file with checked bootloader option.
Then you can use JIG to reset the binary counter.
Click to expand...
Click to collapse
Thanks a lot buddy. this worked surprisingly well for me and Bingo! the binary counter is reset and yellow triangle is gone. BTW, i have a I9100G with SuperROM v3.1 running on it.
asraf8 said:
sorry to bumping old thread..
i reset my counter with flash back with ODIN.
just flash PDA with stock DZKI1
no need pit and no need repartition..
after that just flash any rom and i can use USB Jig to reset the counter..
Click to expand...
Click to collapse
Thanks a lot! It worked perfect for me.
mdtxoom said:
Here is a patch for the i9100g.
It is the bootloader from firmware DZKJ2.
View attachment 916637
Use ODIN and flash this file with checked bootloader option.
Then you can use JIG to reset the binary counter.
Click to expand...
Click to collapse
Hello. I am using CM9 right now. I found that I couldn't reset binary counter with my USBjig. Will this patch still works for me? Since I am using ICS right now with CM9. Hope to get answer and sorry for pumping question to this old thread. Thank you guys.
walauu said:
Hello. I am using CM9 right now. I found that I couldn't reset binary counter with my USBjig. Will this patch still works for me? Since I am using ICS right now with CM9. Hope to get answer and sorry for pumping question to this old thread. Thank you guys.
Click to expand...
Click to collapse
Definitely!
Sent from my GT-I9100 using Tapatalk 2
Paras Lehana said:
Definitely!
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
I read somewhere that flashing a gb bootloader on ics rom will brick the phone!!!
Sent from my GT-I9100G using xda premium
Kingspp said:
I read somewhere that flashing a gb bootloader on ics rom will brick the phone!!!
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Hi, yes i confirm to you if you flash an GB bootloader over an ICS bootloader that will brick your device, that happened two times for me...
Somebody can tell me if this patched bootloader works with an ICS bootloader, please ? Because i don't want to brick it again. Thanks.
Envoyé depuis mon GT-I9100G avec Tapatalk
Oijkn said:
Hi, yes i confirm to you if you flash an GB bootloader over an ICS bootloader that will brick your device, that happened two times for me...
Somebody can tell me if this patched bootloader works with an ICS bootloader, please ? Because i don't want to brick it again. Thanks.
Envoyé depuis mon GT-I9100G avec Tapatalk
Click to expand...
Click to collapse
No...ics and gb bootloaders are different...you cant boot up windows on a mac bootloader....remember for any software it will have backward compatibility not forward...so gb bootloader cant run ics..
Sent from my GT-I9100G using xda premium
If you guys really want to clear the binary counter.... Its simple...worked for me....
Flash the gb of your country using odin and then the bootloader patch and then jig procedure....thanks to street79 for his procedure
Sent from my GT-I9100G using xda premium
shirdisanthosh said:
Thanks a lot buddy. this worked surprisingly well for me and Bingo! the binary counter is reset and yellow triangle is gone. BTW, i have a I9100G with SuperROM v3.1 running on it.
Click to expand...
Click to collapse
Any answer...
so can i or not flash this patch over ics bootloader to reset the counter with a jig afterwards?
question:
does TriangleAway works on i9100G ?
Hi,
I used the patch in ICS rom but it fails in Odin,
What is the solution?
Hi there,
I am using ICS 4.0.3, i have a USB JIG and i want to use it to reset the flash counter and get rid of the pesky triangle.
From what i found on the website i understand that i will have to flash the ‘old’ gingerbread bootloader to get the JIG working with ICS.
I am using this ICS rom I9100XWLP7_I9100XXLPS_I9100XENLP3.
I have two questions
1) Will the ‘old’ gingerbread bootloader work with the above mentioned rom?
2) Were can i find the original ICS bootloader to bring my phone to its initial state in case i need to claim guarantee.
Thanks in advance for your answer
Greetz Henk
Just use triangle away app to get rid of counter and triangle on ics.
Sent from my GT-I9100 using Tapatalk 2
Usb jig is working with this rom GT-I9100_FOP_I9100XWLP7_I9100OXXLPH_I9100XXLPS. I want to update to dxlp9 and root with CF-Root but i can't reset the counter. On that xwlp7 the jig is working (personally tested).
davidsgs23 said:
Usb jig is working with this rom GT-I9100_FOP_I9100XWLP7_I9100OXXLPH_I9100XXLPS. I want to update to dxlp9 and root with CF-Root but i can't reset the counter. On that xwlp7 the jig is working (personally tested).
Click to expand...
Click to collapse
You need to flash the old bootloader from odin.
http://db.tt/Jq43Qpgf
Sent from my GT-I9100 using Tapatalk 2r
Hello ,
How can I reset flash counter on I9100G ?
well there are two ways
A.use triangle away to reset counter(not tested highly dangerous)
B.get usb jig and follow this
1.if your on ics flash back to gb and flash gb old bootloader
2.connect usb jig and your device will go download mode and you will see the counter reset
3.flash ics(if you want it) and to root it without increasing the counter follow method 2 from here: http://forum.xda-developers.com/showthread.php?t=1679778
tips:when you get the ics make sure you get dont get lp7(because of hardbrick bug) but ics.and i got it form here: http://forum.xda-developers.com/showthread.php?t=1565715
darkshadow1997 said:
well there are two ways
A.use triangle away to reset counter(not tested highly dangerous)
B.get usb jig and follow this
1.if your on ics flash back to gb and flash gb old bootloader
2.connect usb jig and your device will go download mode and you will see the counter reset
3.flash ics(if you want it) and to root it without increasing the counter follow method 2 from here: http://forum.xda-developers.com/showthread.php?t=1679778
tips:when you get the ics make sure you get dont get lp7(because of hardbrick bug) but ics.and i got it form here: http://forum.xda-developers.com/showthread.php?t=1565715
Click to expand...
Click to collapse
Thank you but I haven't got Usb Jig.
TriangleAway is very easy , Do you have tried ?
Arnadel said:
Thank you but I haven't got Usb Jig.
TriangleAway is very easy , Do you have tried ?
Click to expand...
Click to collapse
triangle away works
neerajganga said:
triangle away works
Click to expand...
Click to collapse
Dose it work on i9100G too?
And that too on ics??
Sent from my GT-I9100G using Tapatalk 2
incarnation95 said:
Dose it work on i9100G too?
And that too on ics??
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
yes it works on i9100g
and it only works on ics
I try it now and tell me
Magic header not found unsupported device
Sent from my GT-I9100G using Tapatalk 2
eng.mohamed851 said:
I try it now and tell me
Magic header not found unsupported device
Sent from my GT-I9100G using Tapatalk 2
Click to expand...
Click to collapse
which kernel are u on
Lastest codeworkx kernal
Sent from my GT-I9100G using Tapatalk 2
hey neerajganga
you said triangle away worked, the reason i said it was not tested and highly dangerous was because no one even tried on i9100g so thats why.my question is this will it work with i9100g with rootbox ics with cm based kernel?
also eng.mohamed851
are you in ics or gb because triangle away works only for ics.
Triangle Away does not work on I9100g.. It says MAGIC HEADER NOT FOUND.
May be we need to request its developer to make it compatible with I9100G also..
+1
Sent from my SAMSUNG-SGH-I727 using xda premium
get a jig or google how to create your own usb jig. this is the only way
Why do people continue to post offtopic crap in development sections?
This forum is for developments, not questions or general discussion or the "I cant use search button" forum
Questions go in Q&A.
Discussions go in General.
Developments, ie ROMS, Kernels, Mods, Reference etc goes in appropriate device dev forum.
How hard is that to comprehend???
Stock German 2.3.6 and stock German 4.0.4 DIDN'T WORK with usb jig.
I tried this but no success.
panosfx said:
Stock German 2.3.6 and stock German 4.0.4 DIDN'T WORK with usb jig.
I tried this but no success.
Click to expand...
Click to collapse
u need to flash the old bootloader after flashing 2.3.6
ten only u can clear with a jig
And where can i find old bootloader?
panosfx said:
And where can i find old bootloader?
Click to expand...
Click to collapse
for i9100g here : http://forum.xda-developers.com/showpost.php?p=28343633&postcount=3
How to install old bootloader and reset counter?
I have a Galaxy s2 GT-I9100 and unsuccessfully attempted to root the phone and the counter is on 5.
Current state of the phone is that it can only access download mode.
Tried a jig, that didn't work. Next tried to install old bootloader using Odin this also failed.
Initially the phone was running ICS and I believe I must have attempted to install an incompatible root kernel.
My intention was to reset the binary counter and then use Kies to restore the original firmware.
Any assistance would be appreciated.
RobFin said:
I have a Galaxy s2 GT-I9100 and unsuccessfully attempted to root the phone and the counter is on 5.
Current state of the phone is that it can only access download mode.
Tried a jig, that didn't work. Next tried to install old bootloader using Odin this also failed.
Initially the phone was running ICS and I believe I must have attempted to install an incompatible root kernel.
My intention was to reset the binary counter and then use Kies to restore the original firmware.
Any assistance would be appreciated.
Click to expand...
Click to collapse
flash stock rom
Hey Guys!
I just bought the mighty S2 and am loving it.
Baseband version: I9100DDLPA
Build Number: IML74K.XWLP7
I tried rooting my phone with ODIN and CF_ROOT method. This is the file version i used.
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
Now after rooting, my phone booted automatically. When i tried restarting, it was getting stuck on the yellow triangle.
I then downloaded the other kernel and tried flashing that too with ODIN.
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
But alas..
Then i downloaded the official ROM for my country and flashed it with ODIN. Fixed my phone. Below is the firmware i used.
GT-I9100_INU_I9100XWLP7_I9100ODDLP9_I9100DDLPA
This runs on ICS 4.0.3. I see that there's one more ROM of my country thats 4.0.4 on samsung-updates.
So my questions are as below
1) Which CF_ROOT version do i use to get my stock firmware rooted?
2) Is 4.0.4 any better than 4.0.3? Where do i find the changelog?
3) Can I flash a firmware of ANY country? Does it matter if I flash the firmware of my neighboring country?
4) Where do i find the stock kernel for my Firmware?
5) Does flashing the official firmware flash the stock kernel along with it? Meaning will it remove the Siyah-s2-v4.1.5 i am currently running :cyclops: ?
6) If 5 is yes, and if i need to by chance send my phone to the service center for warranty, and also if I am running a custom rom, will flashing the original firmware of my country + removing the yellow triangle + resetting the counter bring it back to warranty? ;P
7) Is there a way to try a ROM from the SD card without actually flashing it?
I seriously gotta parcel a crate of beer for the one who answers my questions.. One all set, I am in for trying out a custom ROM!
androiderb89 said:
Hey Guys!
I just bought the mighty S2 and am loving it.
Baseband version: I9100DDLPA
Build Number: IML74K.XWLP7
I tried rooting my phone with ODIN and CF_ROOT method. This is the file version i used.
CF-Root-SGS2_XW_XEN_LP7-v5.4-CWM5.zip
Now after rooting, my phone booted automatically. When i tried restarting, it was getting stuck on the yellow triangle.
I then downloaded the other kernel and tried flashing that too with ODIN.
CF-Root-SGS2_DX_XTC_LP7-v5.4-CWM5.zip
But alas..
Then i downloaded the official ROM for my country and flashed it with ODIN. Fixed my phone. Below is the firmware i used.
GT-I9100_INU_I9100XWLP7_I9100ODDLP9_I9100DDLPA
This runs on ICS 4.0.3. I see that there's one more ROM of my country thats 4.0.4 on samsung-updates.
So my questions are as below
1) Which CF_ROOT version do i use to get my stock firmware rooted?
2) Is 4.0.4 any better than 4.0.3? Where do i find the changelog?
3) Can I flash a firmware of ANY country? Does it matter if I flash the firmware of my neighboring country?
4) Where do i find the stock kernel for my Firmware?
5) Does flashing the official firmware flash the stock kernel along with it? Meaning will it remove the Siyah-s2-v4.1.5 i am currently running :cyclops: ?
6) If 5 is yes, and if i need to by chance send my phone to the service center for warranty, and also if I am running a custom rom, will flashing the original firmware of my country + removing the yellow triangle + resetting the counter bring it back to warranty? ;P
7) Is there a way to try a ROM from the SD card without actually flashing it?
I seriously gotta parcel a crate of beer for the one who answers my questions.. One all set, I am in for trying out a custom ROM!
Click to expand...
Click to collapse
1 I don't know I use siyah kernel to root although there are full instructions in chainfires thread.
2 4.0.4 is better than 4.0.3 as it's an upgrade , use Google for change log.
3 yes you can flash any countries rom for your device.
4 in Stock rom. Just reflash the ROM to stock kernel, but this will loose root access.
5 yes. Correct.
6. It will remove triangle but you need triangle away app to reset counter. Credits to chainfire
7 no not that I know of.
Sir can I suggest you read the sticky threads in this forum. There are many excellent guides, advice, tips and information. You would do well to read them to save bricking your new device.
All the best
Sent from my GT-I9100 using xda premium
HANDSY said:
1 I don't know I use siyah kernel to root although there are full instructions in chainfires thread.
2 4.0.4 is better than 4.0.3 as it's an upgrade , use Google for change log.
3 yes you can flash any countries rom for your device.
4 in Stock rom. Just reflash the ROM to stock kernel, but this will loose root access.
5 yes. Correct.
6. It will remove triangle but you need triangle away app to reset counter. Credits to chainfire
7 no not that I know of.
Sir can I suggest you read the sticky threads in this forum. There are many excellent guides, advice, tips and information. You would do well to read them to save bricking your new device.
All the best
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hi Handsy. I am doing that. Thats were i learnt how to root n stuff but it failed. Hence used Siyah kernel and automagically got Root access
Anyway regarding point number 4, i didnt understand what you meant. DO I reflash the entire 350MB firmware just to get the stock kernel??
androiderb89 said:
Hi Handsy. I am doing that. Thats were i learnt how to root n stuff but it failed. Hence used Siyah kernel and automagically got Root access
Anyway regarding point number 4, i didnt understand what you meant. DO I reflash the entire 350MB firmware just to get the stock kernel??
Click to expand...
Click to collapse
Yes to get stock kernel re-flash the whole stock rom. There is a method of extracting the kernel from the zip file but I've never tried it. Easy and safe to re flash whole rom package.
Sent from my GT-I9100 using xda premium
HANDSY said:
Yes to get stock kernel re-flash the whole stock rom. There is a method of extracting the kernel from the zip file but I've never tried it. Easy and safe to re flash whole rom package.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Thanks for the great help! +1 for ya
I noticed that flashing the firmware didnt make a single change to my phone. The apps and settings were totally intact. Will installing 4.0.4 too be the same? Also i heard about this brick bug on our phone. Does that happen while only wiping data/cahche using CWM? Is there an anther way of wiping data/cache/dalvik etc? other than factory reset for the bug
androiderb89 said:
Thanks for the great help! +1 for ya
I noticed that flashing the firmware didnt make a single change to my phone. The apps and settings were totally intact. Will installing 4.0.4 too be the same? Also i heard about this brick bug on our phone. Does that happen while only wiping data/cahche using CWM? Is there an anther way of wiping data/cache/dalvik etc? other than factory reset for the bug
Click to expand...
Click to collapse
When moving between like firmwares (same number) you often do this without wiping data however when upgrading or down grading a full wipe is necessary. To avoid brick bug only wipe with a custom kernel eg siyah etc
Sent from my GT-I9100 using xda premium
Dont forget to backup your efs folder and make a nand backup before you get going.
Help
Hardware : MT6577
Model : GT-I93000
Build number : IMM76D.I93000ZSALED.9P017.6628
Build date UTC : 20121016-085327
Android v : 4.1.1
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Tue Oct 16 16:50:37 CST 2012
Got softbricked. Bootloop. Need help to unbrick.
Welcome to the GT-I9100 forum.....
Android: 4.0.4
Build Number: IMM76D.XXLPZ
Baseband Version: I9100GDDLP7
I want to remove Custom binary count from my phone
I cannot find root for XXLPZ, to use Triangle Away to remove the count. I haven't tried the USB Jig method, does it work with GT-i9100G?
PLEASE I BEG SOMEONE WHO HAS GT-I9100G HELP ME OUT!!!
I wanna reset my custom binary counter...
PLEASE HELP^^^^
Triangle away...
Happy new year
Paulius
monishfj said:
Android: 4.0.4
Build Number: IMM76D.XXLPZ
Baseband Version: I9100GDDLP7
I want to remove Custom binary count from my phone
I cannot find root for XXLPZ, to use Triangle Away to remove the count. I haven't tried the USB Jig method, does it work with GT-i9100G?
PLEASE I BEG SOMEONE WHO HAS GT-I9100G HELP ME OUT!!!
I wanna reset my custom binary counter...
PLEASE HELP^^^^
Click to expand...
Click to collapse
flash back to gb and use a usb jig to reset the counter
the usb jig will only work in old boot loader
Paulius7 said:
Triangle away...
Happy new year
Paulius
Click to expand...
Click to collapse
triangle away does not wrk in i9100g
Hi
find 'triangle away' app it will be the only solution for s2
monishfj said:
Android: 4.0.4
Build Number: IMM76D.XXLPZ
Baseband Version: I9100GDDLP7
I want to remove Custom binary count from my phone
I cannot find root for XXLPZ, to use Triangle Away to remove the count. I haven't tried the USB Jig method, does it work with GT-i9100G?
PLEASE I BEG SOMEONE WHO HAS GT-I9100G HELP ME OUT!!!
I wanna reset my custom binary counter...
PLEASE HELP^^^^
Click to expand...
Click to collapse
Well you cant have looked far for how to root LPZ there is plenty of topics on it so your just lazy.
To root LPZ you simply need to flash Philz or Jeboo custom kernel. Once you have flashed kernel install/use Triangle Away.
niks23 said:
find 'triangle away' app it will be the only solution for s2
Click to expand...
Click to collapse
No it isnt the only solution and it will also not work unless he roots his device.
neerajganga said:
flash back to gb and use a usb jig to reset the counter
the usb jig will only work in old boot loader
triangle away does not wrk in i9100g
Click to expand...
Click to collapse
No need to flash back to GB, all he needs to do is flash the GB bootloader on its own and then use jig and then can flash ICS/JB bootloader back.