So I was helping my friend with her China Galaxy S2 GT - I9108 and I foolishly tried to flash "GT-I9100_ClockworkMod-Recovery_5.0.2.3.tar" onto her phone through odin...
Now it's stuck at the yellow triangle everytime when I boot up. I've bricked her 500$ phone...
Please tell me anyone, how do I make it work again?
There are chinese methods apparently but I am not chinese.... I just wish someone could provide reasonably well written instructions and DL links so I can fix her phone! Please!
Since it is apparently a Chinese only model phone, I think you'd be hard pressed to find any English websites that can help you... Maybe some Chinese sites, with Google Translate? Not perfect, but it's something.
Try to find stock firmware and flash it via odin. Google translate can help you for chinese sites.
Sent from my GT-I9100 using XDA
Also, if this isn't obvious now... Don't flash any more i9100 kernels or firmwares. Only flash i9108 kernels or firmwares.
Stock?
I can't seem to find it anywhere! My brain aches from looking for the stock >< Please help? ): What would I need to do IF I found it?
Since I flashed a GT - I9100 tar file can someone link me to a tar file that is compatible with the GT - I9108?
http://forum.xda-developers.com/showthread.php?t=1457458
Will this guide work?
hadrice said:
I can't seem to find it anywhere! My brain aches from looking for the stock >< Please help? ): What would I need to do IF I found it?
Since I flashed a GT - I9000 tar file can someone link me to a tar file that is compatible with the GT - I9108?
Click to expand...
Click to collapse
You meant I9100, above, right?
hadrice said:
http://forum.xda-developers.com/showthread.php?t=1457458
Will this guide work?
Click to expand...
Click to collapse
Possibly, but don't use any of the firmwares linked within, as they are all for i9100 model phones.
Go to samfirmware.com to find stock i9108 firmwares. Download one from there, (you'll have to register but it's free) and flash using that guide. Again, don't use any files linked from the guide as they are not meant for your phone. But the steps should be the same.
EDIT: actually, don't use that guide. Just download an i9108 firmware from samfirmware.com, flash it in Odin in the PDA field, then do a factory reset. Then you should be good.
Yes Sorry, I fixed it haha
GT - i9100 haha
And okay I'll try that right now!
ctomgee said:
You meant I9100, above, right?
Possibly, but don't use any of the firmwares linked within, as they are all for i9100 model phones.
Go to samfirmware.com to find stock i9108 firmwares. Download one from there, (you'll have to register but it's free) and flash using that guide. Again, don't use any files linked from the guide as they are not meant for your phone. But the steps should be the same.
EDIT: actually, don't use that guide. Just download an i9108 firmware from samfirmware.com, flash it in Odin in the PDA field, then do a factory reset. Then you should be good.
Click to expand...
Click to collapse
Enter *#1234# to get the PDA and ???? to get your product code
I can't enter that on my phone since its bricked? What should I do? Also It comes up as blank... I mean no firmwares are listed when I click the link
hadrice said:
Enter *#1234# to get the PDA and ???? to get your product code
I can't enter that on my phone since its bricked? What should I do? Also It comes up as blank... I mean no firmwares are listed when I click the link
Click to expand...
Click to collapse
Don't worry about product code. You know you have an I9108.
The site is a tad confusing. You have to click the Firmwares tab, then click Type: Smartphone, then OS: Android, then Models: GT-I9108, then Region: Asia. That will get you a list of stock firmwares for the i9108.
Edit to add: Also, ignore the box at the bottom that says "LATEST FIRMWARES". If you notice, the models are all for a different model of phone; not the GT-I9108. The PDA for the I9108 should always start with "I9108".
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9108&r=-1#modelsa
I'm there! However theres none under the list O_O is it just my browser not loading the list? It wont show haha
Edit: NVM I forgot to click "asia"
edit 2: You reached your hourly traffic limit.
You can wait download for 13 minutes or upgrade to premium
Oh my goodness hotfile... ugh.
FYI, this may or may not be of interest to you.
I found this page using google that suggests that the i9108 uses the same SoC/chipset that the i9100G uses. Which is why you had issues when you used an i9100 kernel to try to root.
EDIT: well, you never explicitly said you were rooting, but you were flashing a kernel that had CWM Recovery in it, so I assumed you were rooting.
My phone won't enter download mode with
Volume Down home and power! What do I do?
Last thing I did was flash "I9100ZSKG2-kernel-PDA.tar" pda.....
hadrice said:
My phone won't enter download mode with
Volume Down home and power! What do I do?
Last thing I did was flash "I9100ZSKG2-kernel-PDA.tar" pda.....
Click to expand...
Click to collapse
Was that before or after I told you to go to samfirmware.com?
And when you're trying download mode, you're doing it with the phone powered off, right? Then holding Vol Down + home, then pressing power till the screen lights?
Edit: PLEASE tell me you did not flash yet another I9100 kernel, even after I told you not to.
ctomgee said:
Was that before or after I told you to go to samfirmware.com?
And when you're trying download mode, you're doing it with the phone powered off, right? Then holding Vol Down + home, then pressing power till the screen lights?
Click to expand...
Click to collapse
Before ): Yup I am...
Strangely the phone only turns on when I plug it into the USB cable
Apparently the power button is working fine when USB connected.... and it keeps restarting when USB is connected too!
Edit: Restarting seems to be just when plugged into computer... so i guess its driver stuff.
On wall charger its just stuck on the boot screen
hadrice said:
Before ): Yup I am...
Strangely the phone only turns on when I plug it into the USB cable
Apparently the power button is working fine when USB connected.... and it keeps restarting when USB is connected too!
Click to expand...
Click to collapse
Well, during one of the boot cycles while the plug is in, try holding vol down and home. Maybe you'll get lucky. OR take out batt, hold vol down and home, (keep holding) then put battery back, and THEN press power till screen lights.
If that doesn't work, you may need to try obtaining a USB jig. You can order them on eBay or construct your own. There are instructions all over google on how to do it, but they cost like $2-3, so I just bought one.
So since it still powers on and home button works the USB jig should work right?
And flashing to stock firmware using PDA option on Odin should in theory work right?
Can you reccomend a link for a good jig? Don't wanna buy a bad one.
hadrice said:
So since it still powers on and home button works the USB jig should work right?
And flashing to stock firmware using PDA option on Odin should in theory work right?
Click to expand...
Click to collapse
Probably, and yes.
hadrice said:
Can you reccomend a link for a good jig? Don't wanna buy a bad one.
Click to expand...
Click to collapse
I just got one off a reputable eBay seller, and it worked. Maybe I got lucky.
I suggest you a Chinese forum here:http://bbs.gfan.com/forum-712-1.html
The posts there are ALL about GT-9108. Good luck!
Why did you revive several months old thread?
Sent from my Galaxy S2 GT i9100
how u fixed it
how u fixed it??? can teach me thnx!!!
Related
Hi All,
I tried to flash my friends i9100 (it had arabic 2.3.4 firmware, but i didn't write down the exact firmware number), to I9100JPKI1 2.3.5 1 file update. But it gave "FAIL" result in ODIN. After that phone got stuck on Download screen. I removed battery and restarted the phone. And after it got stuck on the following screen (pic at the end of post)
I tried to flash it again by odin but it's not flashing (Attached pic of ODIN after unsuccessful flash below). Any ideas how to restore the phone?
it seems connectivity problem. Have you tried another USB or another USB cable?
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Are you able to access recovery mode? If yes, try to do a full wipe.
EDIT: Try to Kill all process of Kies, and see if Odin recognize your phone
No, it's stuck on this screen. i can't put it in Download mode. Even if i start it: Volume Down+Home+Power this screen is coming.
ODIN can't recognize the phone.
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
limon11 said:
Yes, tried different cables on different computers. The phone is booting with this phone-warning triangle-computer logo immediately. Even samsung logo is not coming before it.
Click to expand...
Click to collapse
Maybe some file are corrupted. Try to follow these steps:
[READ THIS] Got a Boot Loop? Don't post a New Thread!
[ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
On the first flashing (after which it became like this) i didn't do repartitioning and didn't use PIT file. Just selected PDA file.
meranto said:
Ouch, I see repartition and a PIT file, that usually means the phone is really dead; a job for the service centre.
Which guide did you use?
Click to expand...
Click to collapse
I didn't see that...maybe only service center can do this job
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
limon11 said:
I tried to follow following guide: http://forum.xda-developers.com/showthread.php?t=1108499.
Did
1) Turn off your phone. Unplug it from your computer etc
2) Hold down home, power, and volume UP. This will enter recovery mode. If you are using CF-Root, you'll get CWM recovery. If not, you get stock recovery. It doesn't matter which appears.
BUT phone is not going into recovery mode.
Click to expand...
Click to collapse
I think that you need to leave the phone to Service Center.
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
limon11 said:
The thing is that the phone was bought in another country, so there is no warranty in my country for it. That's why i'm searching for solution myself.
Click to expand...
Click to collapse
I had a problem weeks ago with my phone too. Tried a lot of things and nothing fix the problem. But when i was losing hope, i found the solution by myself.
My problem was only IMEI number and i recovered it. I think that your best choice is read a lot before take some decision. And the most recommended choice is leave the phone to Service center.
Good luck!
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
If there is any way to get Odin to recognize your phone there is still hope. Try to get into download mode in all possible ways, sometimes it seems lost but suddenly you get in. Make sure Kies is not running in the background.
If you cannot get into download mode, even with a jig, and Odin never recognizes the phone, it is a job for service centre or JTAG or something, but not yourself.
limon11 said:
Maybe JIG will be useful to put the phone into DOWNLOAD mode?
P.S. : I am keeping going to Service Centre options as a last resort.
Click to expand...
Click to collapse
JIG maybe work
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
limon11 said:
OK. I made very big mistake in the begining. the phone model was i9100g and i flashed it with i9100 firmware. that's seems the cause of the hang.
Click to expand...
Click to collapse
That messed up your phone dude.. Can you still put your phone into download mode?
Sent from my GT-I9100 using xda premium
Finally, Alhamdulillah, i solved my problem of i9100g flashed with i9100 firmware. First to go out from "phone - yellow label - computer" mark i flashed it with i9100g original kernel Kernel_I9100GDZKI1 from http://forum.xda-developers.com/showthread.php?t=1276105&page=3. after that it became possible to put the phone into download mode. after that i flashed it with ODIN USING PIT FILE FOR OMAP4 from the same forum and with i9100G new firmware. and that's all, phone is working again.
While flashing Odin stuck at zImage... I disconnected the phone from PC. Now i cant enter neither the DL mode, nor recovery... Important thing that the PC still see the phone when connected (Odin too (yellow indicates)). i9100g. Can someone help?
If the flash stalled is it possible you were flashing an incompatible firmware for your phone? I9100G has different firmware yo the I9100/T.
Anyway, my suggestion is if uoi definitely can't get into download mode then maybe try using a jig to force it. But I suspect that may also not work.
You say the PC picks up the phone when you connect it. Does that mean it boots up?
Sent from my GT-I9100T
sxi200 said:
If the flash stalled is it possible you were flashing an incompatible firmware for your phone? I9100G has different firmware yo the I9100/T.
Anyway, my suggestion is if uoi definitely can't get into download mode then maybe try using a jig to force it. But I suspect that may also not work.
You say the PC picks up the phone when you connect it. Does that mean it boots up?
Sent from my GT-I9100T
Click to expand...
Click to collapse
No, the phone doesnt boot. Maybe i used bad cable for flash process... because i used different kind of usb-cable (not samsung). Is there any solution without jig?
p.s.: i was trying this) http://forum.xda-developers.com/showthread.php?t=1506954
qn-ram said:
No, the phone doesnt boot. Maybe i used bad cable for flash process... because i used different kind of usb-cable (not samsung). Is there any solution without jig?
Click to expand...
Click to collapse
Cable shouldn't be a problem. I've used many different ones without problem. Were you flashing the correct file for your model?
Edit: just checked the link and it is for i9100G.
Sent from my GT-I9100T
Were you using the tar version? If so where did you put it in Odin and did you tick anything else (eg bootloader)?
Sent from my GT-I9100T
sxi200 said:
Cable shouldn't be a problem. I've used many different ones without problem. Were you flashing the correct file for your model?
Edit: just checked the link and it is for i9100G.
Sent from my GT-I9100T
Click to expand...
Click to collapse
This means i was right. ROM is capable for my i9100G)
sxi200 said:
Were you using the tar version? If so where did you put it in Odin and did you tick anything else (eg bootloader)?
Sent from my GT-I9100T
Click to expand...
Click to collapse
was using tar. in the pda section. didnt touch any checkboxes or something else
Yeah should have been fine then. Can't see why download mode won't work because you haven't touched the bootloader. Maybe try removing then re-inserting the battery, then use the 3 buttons for download mode.
Sent from my GT-I9100T
sxi200 said:
Yeah should have been fine then. Can't see why download mode won't work because you haven't touched the bootloader. Maybe try removing then re-inserting the battery, then use the 3 buttons for download mode.
Sent from my GT-I9100T
Click to expand...
Click to collapse
already tried... no effect. while flashing Odin stucked at zImage. after 30 min waiting i switched off the cable. Odin showed red message (fail)
Well if all else fails, next step may be a jig. It can be a pain if you don't have one but check in the general section. There is a thread about users (including myself) who are willing to help people who urgently need to use a jig. There are heaps of countries listed so if your lucky you may find someone close by who will help.
EDIT: here is the link to the thread. Check the first post for locations.
http://forum.xda-developers.com/showthread.php?t=1495867
Sent from my GT-I9100T
sxi200 said:
Well if all else fails, next step may be a jig. It can be a pain if you don't have one but check in the general section. There is a thread about users (including myself) who are willing to help people who urgently need to use a jig. There are heaps of countries listed so if your lucky you may find someone close by who will help.
Sent from my GT-I9100T
Click to expand...
Click to collapse
thx, i ll wait 4 some time. mb somebody showes another way to solve this sh*t)
OP, are you plugged directly into a USB port on the PC? Not through a keyboard pass-through, or a USB hub, or something similar? I've heard of stalled flashes because the person was not plugged directly into the PC.
The other thing, is to try a different USB cable. Faulty cables can also cause stalled flashes.
ctomgee said:
OP, are you plugged directly into a USB port on the PC? Not through a keyboard pass-through, or a USB hub, or something similar? I've heard of stalled flashes because the person was not plugged directly into the PC.
The other thing, is to try a different USB cable. Faulty cables can also cause stalled flashes.
Click to expand...
Click to collapse
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
qn-ram said:
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
Click to expand...
Click to collapse
When you originally flashed in Odin did you you do so from recovery or download mode?
Sent from my GT-I9100T
sxi200 said:
When you originally flashed in Odin did you you do so from recovery or download mode?
Sent from my GT-I9100T
Click to expand...
Click to collapse
download mode)
qn-ram said:
download mode)
Click to expand...
Click to collapse
**** man! Something is not right. Flashing a kernel in download mode as pda shouldn't fully brick your phone. I've had plenty of bad flashes before but download mode always works. Other than retrying for download mode or jig, I'm out of ideas.
Sent from my GT-I9100T
sxi200 said:
**** man! Something is not right. Flashing a kernel in download mode as pda shouldn't fully brick your phone. I've had plenty of bad flashes before but download mode always works. Other than retrying for download mode or jig, I'm out of ideas.
Sent from my GT-I9100T
Click to expand...
Click to collapse
will sdk tools or something make sense?)
qn-ram said:
no usb hubs or other similiar stuff. tell me how to use another (original) cable if I CANT ENTER THE RECOVERY???
Click to expand...
Click to collapse
WHAT DOES RECOVERY HAVE TO DO WITH FLASHING???
You have other posts in this thread that imply you were able to try flashing again. If that's not the case, than I misinterpreted, and sorry I tried to troubleshoot your problem and suggest a course of action.
I'm sure you're frustrated, but that is no reason to snap at people trying to help you.
ctomgee said:
WHAT DOES RECOVERY HAVE TO DO WITH FLASHING???
You have other posts in this thread that imply you were able to try flashing again. If that's not the case, than I misinterpreted, and sorry I tried to troubleshoot your problem and suggest a course of action.
I'm sure you're frustrated, but that is no reason to snap at people trying to help you.
Click to expand...
Click to collapse
sry. thought that recovery->dl mode. thx 4 ur help
qn-ram said:
sry. thought that recovery->dl mode. thx 4 ur help
Click to expand...
Click to collapse
Recovery mode and Download mode are not the same. Flashing can only happen in Download mode.
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Hi there
Check your usb connections please, one of the most common and unmentioned problems with ODIN is that it doesnt like being connected through hubs or non usb2 ports, i failed with odin quite a few times, until i disconnected my phone from the usb hub and connected it directly to the pc usb2 port, everything was fine after that.
Odin doesnt usually fail, what files are you flashing, is the firmware a 1 file package or multiple files with a .pit file??
If its 1 file, make sure you untick repartition.
Odin is solid, i would ask you to go away and check all the above, use odin 1.83 which is the best version i found, then try again, also check your lead, sometimes cheap usb leads are designed for charging and not syncing.
Good luck
---------- Post added at 12:47 PM ---------- Previous post was at 12:45 PM ----------
also the black screen mode is because the flash failed, you need to re enter download mode, and reflash until you get a pass, if it fails again, check md5 sums or download a generic s2 firmware and try again, its not bricked dont worry, as long as you do it right it will be fine.
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Can u get into clockworkmod recovery?
Press Home+volume up+ power key until you get to cwm recovery.
And yes you probably connected your phone through a hub or usb1 port.
If nothing else works you'll need a jig to restart into download mode. Try and look for the jig thread on general sgs2 forum for free locations.
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Absolutley these guys are right, even if your flash has failed you should still be able to enter download mode, are you sure you cant, VOLUME DOWN, MIDDLE BUTTON AND POWER BUTTON, keep them all held down and it will boot to DL Mode, every time mine got a fail i still got to dl mode no problem.
Failing that yer, get a jig, usually they come from singapore, so if you cant wait that long pop to an electronics store, buy the resistors you need and a micro usb plug and make one, i made one yesterday and it cost me £1.40 to make, although its a makeshift for emergencies, it will do until the one ive ordered arrives.
Keep trying dl mode, no reason to not get into it.
MistahBungle said:
That's forced download mode I.E. it's forcing you to flash something. Get a stock rom from Samfirmware or Checkfus & flash it with Odin.
Click to expand...
Click to collapse
^This.
Also, OP, make sure you are flashing an I9100G firmware, and NOT an I9100 firmware. Likely that was the cause of your predicament in the first place, as that is the common cause of this screen being reached.
That sounds like a brick software, I get some like this time ago
Sent from SGSII//CM9 >>xBlackDroid<<
tried to flash the phone from ODIN and failed, most probably he done it wrong. The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon. Kies is not recognizing the phone although the drivers are installed. When I pluged the phone for the first time in the PC it automatically instaled 2 drivers and that was it. Is it bricked? I haven`t seen this before.
The phone is an SGS 2 model GT-I9100G, ssn I9100GGSMH.
I hav downloaded 2 official firmware, 2.3.6 and 4.0 .. all is Malaysia..
flash so many times and keep failing..
dlan1 said:
The only thing the phone does is displaying an icon in the middle of the screen with a phone and a PC and an exclamation point in between them. I can`t get it to enter in download mode (volume down+home+power) and I can`t start it eather. It just stays at that icon.
Click to expand...
Click to collapse
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
please share firmware SAMSUNG GALAXY S II I9100GGsmh
dlan1 said:
i was trying to flash ICS 4.0 firmware to my samsung s2 I9100G Malaysia just now... but failed..
then i try to unplugged it from my computer and pulling my battery out from my phone..
when i try to reboot my phone it shows up a black screen with a phone connecting to a computer with a yellow triangle warning sign between...
how can i quit this mode!! omg!!!
Click to expand...
Click to collapse
get ur phone in download mode and flash stock firmware it shud be fi9
This is already forced download mode. Read earlier posts.
Did you see this thread: :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=1457458
Why are you people replying to a thread/poster from 6 weeks ago ?
The most recent poster (Ciasing) seems to be after an I9100G stock rom.
That's happened to me too please check this , thank god the link really helped me http://www.youtube.com/watch?v=KPSBXC72rmg
ciasing said:
please share firmware SAMSUNG GALAXY S II I9100GGsmh
Click to expand...
Click to collapse
u can find it here
http://forum.xda-developers.com/showthread.php?t=1754158
or
www.samfirmware.com
or download the firmware using checkfus
oinkylicious said:
Stop ignoring the people in this thread who actually know what they're talking about. Your phone is already in download mode.
Click to expand...
Click to collapse
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
machv5 said:
I have the same problem and if it was actually in download mode properly then why won't ODIN detect the device????????????????????
I am trying to get clockworkmod onto the device. And the phone does nothing else but show that screen no matter how many times I do button combos etc... Maybe you should stop ignoring the guy when he's saying IT ISN'T WORKING AFTER HE HAS TRIED THE STEPS THAT PEOPLE WHO "KNOW WHAT THEY ARE DOING" HAVE PROVIDED.
Click to expand...
Click to collapse
Depends on what you have already tried flashing since you originally got into this mess in the first place.
If you started blindly flashing stuff for any which device, it's possible you have borked your device to the point where your PC will no longer detect it.
Say, if you tried flashing a Fascinate ROM or similar to a Vibrant.
I'm just guessing that's what happened, because you started this thread in the Fascinate forum.
The Fascinate and the Vibrant are two completely different models of phones. The Fascinate is the Verizon variant of the Galaxy S, and is a CDMA phone. You have a Telus version of the Vibrant, which is a GSM phone.
So if you flashed something out of the Fascinate forum to your SGH-T959D Vibrant, you likely caused this issue yourself. And why are you in the I9100 forum trying to solve your problem?
Go to the Vibrant forum for your problem with your Vibrant phone.
Use Odin
dlan1 said:
thank for ur info.
anyway to get the hell out of the black scren??..
i connot re-enter the download mode... keep stuck in the black screen with a phone connecting to a computer with a yellow triangle warning sign!..
Click to expand...
Click to collapse
dont worry.. i also encountered with the same problem.. connect ur phone as it is to the pc and open odin of latest version. and flash its stock rom using PDA.. the phone will come back to normal.:good:
i brick 2 samsung s2 i9100 now help
i have jig but i can't go in downloading mode help
If it was a normal software update with a firmware that was not rooted and you still have warranty left, you should bring the phone to the shop where you bought it. They will fix it.
Reply
Did you try a battery pull then turn on your phone and immediately hold the 3 (button combo vol up + home + power)? Also what caused this problem?
not work
Ryan00101101 said:
Did you try a battery pull then turn on your phone and immediately hold the 3 (button combo vol up + home + power)? Also what caused this problem?
Click to expand...
Click to collapse
not work thanks for quick reply
If Odin recognizes your phone, you should be able to flash from that Phone - /!\ - PC screen.
it there any forum already exist plz tell me
very bad position now two set are brick guys help me out
faizan_950 said:
it there any forum already exist plz tell me
very bad position now two set are brick guys help me out
Click to expand...
Click to collapse
Read my post above yours. Just treat the Phone - /!\ - PC screen like download mode.
ctomgee said:
If Odin recognizes your phone, you should be able to flash from that Phone - /!\ - PC screen.
Click to expand...
Click to collapse
thanks it work bro
now i able to install GT-I9100_ClockworkMod-Recovery_4.0.1.4...
but i am not able to access memory and not able to install boot loader...
faizan_950 said:
thanks it work bro
now i able to install GT-I9100_ClockworkMod-Recovery_4.0.1.4...
but i am not able to access memory and not able to install boot loader...
Click to expand...
Click to collapse
Are you sure you have I9100 phones, and not I9100G phones?
Check the label under your batteries.
I9100 firmwares and kernels do not work on I9100G, and vice versa.
faizan_950 said:
not work thanks for quick reply
Click to expand...
Click to collapse
Get into download mode and flash a stock firmware from www.sammobile.com. Make sure you have the i9100 and not I9100G model.
And make sure you know what you're doing before you do anything. It seems like you don't have a clue if you are missing up two phones.
Sent from my GT-P7510 using xda premium
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Edit: Samsung service has replaced the mother board!!
Doing the pit partition has resulted in my phone getting bricked!!
So people new to the forum, never do it :laugh:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
CashAndPotatoes said:
Hi,
You said you couldn't access download mode, but can you access CWM recovery?
If you can then, you should wipe data/factory set, wipe cache and wipe Dalvik-cahe. after that you should re-flash your ROM.
If that doesn't work, maybe you should restore your CWM/Nandroid backup of your ROM before you flashed the JB leak XXLSJ, which in this case seems to be Stock ROM. (providing that you have backed it up in the first place)
Greetz and Happy new year
Click to expand...
Click to collapse
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Pradeep said:
I am unable to get into recovery mode also.
The phone does not respond to any button-combos or connecting to computer or a power source!!
Click to expand...
Click to collapse
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Pradeep said:
Hello,
I am new to the S2 forum. I have purchased the phone on Dec 04. It came with firmware version 4.0.4.
The PDA was I9100XWLPW and CSC was I9100ODDLPC.
After a week, I flashed the leaked JB firmware XXLSJ and used PhilZ cwm6 kernel to obtain root.
I was not having any problems until today.
I was using the phone normally, it had about 60% battery. Suddenly it was not waking up ( The phone was not used for about 15min ). I tried removing the battery, all button combinations but was not booting normally or into recovery. I could get into the download mode by plugging the phone to the PC. Odin failed to flash the official FW and the JB leak. I followed the thread http://forum.xda-developers.com/showthread.php?t=1457458 and found out it was a corrupted NAND r/w function.
I tried doing all the steps given in the thread. Now my phone does'nt go into the download mode and does'nt show charging when plugged to a power source.
Can I recover my phone?
Please someone help me or guide me to a previous post that solves this problem!!
Click to expand...
Click to collapse
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Gediprime said:
HI,
today I wake up with the same problem.(Bug from the junary 1st???). I'm on Leak 4.1.2 too
Mi Galaxy sII don't charge the batery (loop from charge batery symbol) All the combination button don't wake up the phone.
The only thing seem working is the download mode. Don't try to connect to ODIN for the moment.
Any idea?
Click to expand...
Click to collapse
If you can access download mode, use it. Try re-flashing your kernel.
nikufellow said:
Remove battery for some time re insert it and see .
Or
Try a jig
leap before you think
Click to expand...
Click to collapse
JIG ???
Gediprime said:
JIG ???
Click to expand...
Click to collapse
Use the search button and use keywords "usb jig". Or google.
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
Click to expand...
Click to collapse
I am sorry!! I am new to this forum and the phone being a recent purchase, i was very much desperate!!
I know the answer may not be different and the problem may not be new hence I've asked to guide me to the appropriate thread in my post!! No offence!!
Thanks for your reply. I will be taking the phone to Samsung Service tomorrow.
Gediprime said:
JIG ???
Click to expand...
Click to collapse
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
TheATHEiST said:
We already have plenty of topics about this why do you feel the need to create another? Your symptoms are no different to others and the answers are no different.
If you cant access download or recovery and cant power on then try a USB jig. If that doesnt work then you will need to take/send it for repair which will either be JTAG or complete mobo replacement.
Just because you create your own topic it doesnt mean answer is going to be any different.
If you can access download mode, use it. Try re-flashing your kernel.
Click to expand...
Click to collapse
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Gediprime said:
I try it but when a push up level button my phone loop again to charging symbol (without charging)
Sorry if this post is the same than another. For my part i'm just trying to find a solution. A have plenty of corporative information on my phone. I do my last backup one weeks ago :crying:
Click to expand...
Click to collapse
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Pradeep said:
In some of the posts, I've read that a JIG may not work on ICS based roms!!
Is this true?? Should I try a JIG first before I take the phone to Samsung Service??
I was on XXLSJ before the phone went dead!!
Click to expand...
Click to collapse
You are misinterpreting what you read. What you're referring to is resetting the binary counter, and no it doesn't work on ICS bootloader however it still works for putting device into download mode (unless its bricked).
nikufellow said:
3 100k resistors + 1k resistor in series connected between 4 and 5 pins of a male usb end when plugged will get you into download mode in case of soft bricks .
leap before you think
Click to expand...
Click to collapse
"Soft-brick" has absolutely no meaning, Your device is either "bricked" or it isnt. Its a made up term by n00bs when they cant get system to boot normally. Your devcie is only bricked when it wont power on or go into useable recovery+download modes. If you can simply use a jig or go directly into flashing a rom then your device is not bricked.
The "bricked" term is used far too loosely nowadays.
Pradeep said:
I had the same problem.. I could get into the download mode by:
1. Phone completely OFF state
2. Connect the USB cable to the phone and PC ( The battery charging indication has to come, atleast once )
3. Fire up ODIN
4. Get the phone into download mode ( Vol-down+home+Power ) while the phone is connected
5. The phone is now recognized by ODIN.
I could flash a kernel (tried siyah and Philz) but the phone was not booting.
While trying to flash Stock and XXLSJ, ODIN was getting failed at factoryfs.fs
After a few trys, the phone just went dead!!
Hope you can flash a firmware successfully :good:
Click to expand...
Click to collapse
Your phone died? you kiding ?
I'm using the leak version of Sammobile since 3 weeks... Why do you think the phone make a bad reaction now? why now?
Ok, you try to flash OFW and don't result. and then you flash again the XXLSJ ? and the phone colaspe?
What kind of roms do i flash? OFM or CFW ? ICS or JB ?
Well if a can connect with ODIN of course
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Pradeep said:
A quick question!!
Is it possible that the phone can be revived (put into download mode) using a JIG if it is not starting at all for any key combinations and it is not showing charging animation when plugged into a computer or a power source??
Click to expand...
Click to collapse
Yes its possible which is the reason we already mentioned to try it
It all depends on the actual base issue though as to whether it will work. Its worth a try either way though, They only cost £1-2 or you can make them yourself if you have the spare parts. (Don't ask how, Use search).
I have tried the JIG, but no luck!!
I have given the phone to Samsung Service.
Hope they fix it!!
Will they use JTAG or it has to be done somewhere else in case Samsung people refuse to do it??
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
nikufellow said:
They wouldn't refuse just act dumb tell something like you were updating firmware via kies and all of a sudden power went down and device bribed
leap before you think
Click to expand...
Click to collapse
Thanks!! Well I did act dumb there!! Said I downloaded a game Royal Revolt (~200 MB), the phone got heated, blah blah blah......
Well I did not tell about firmware upgrade via kies and all....
Only thing that I can do now is wait and hope!!:laugh: