dear all
i hope you can help me.
it is my samsung s5830, when i flash a recovery for it, it seems to be dead.
i use a command to flash the recovery,
Code:
flash_image recovery recovery.img
it seem to be OK,but when i reboot ,i found it was dead...
no matter i push and hold any key, it doesn't gave any reply...
when i connect to pc and hold all key, the Odin can be identification，but when i flash a rom ,it stop at "setup connection..."
Code:
Download Start...
<0> Create File...
<1> StartThread Detected : 1
<2> StartThread Detected : 0
<3> StartThread Detected : 0
<4> StartThread Detected : 0
<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection...
then i push all key again, i get this
Code:
<1> e - dll cannot setup connection with the target.
<0> Destroy instant..
<0> Killed timer
<1> Disconnected!!!
anyone know how to do ?
very thanks, and so sorry to my poor english...
what recovery are you trying to install?
when there are easy ways to do things why you choose difficult ways ??
that flash_image and recovery image might be correct but as i see in update-script you need to mention partition / "recovery" when flashing through recovery itself..
you might give a try to adb shell commands to get into download mode and flash through odin.. [last hope]
Try pulling phone battery. Press appropriate buttons for recovery or d/l. While holding those buttons slide battery into place. This method has got me out of trouble once or twice. G L.
SnowPluralism said:
what recovery are you trying to install?
Click to expand...
Click to collapse
I think the problem is not at recovery.img
well, and i can't get the phone wake now, how can i do ?
thanks very much.
madman_amit said:
when there are easy ways to do things why you choose difficult ways ??
that flash_image and recovery image might be correct but as i see in update-script you need to mention partition / "recovery" when flashing through recovery itself..
you might give a try to adb shell commands to get into download mode and flash through odin.. [last hope]
Click to expand...
Click to collapse
yeah, i didn't mount the partition before flash the recovery.img
why i use the difficult way is i want to try a different way to do a flash .
i am very sorry , now i can't turn on the power ,whether i push any key, so the adb can't connection. i try to use a jig too, but it didn't work...
any help ?
themountig said:
Try pulling phone battery. Press appropriate buttons for recovery or d/l. While holding those buttons slide battery into place. This method has got me out of trouble once or twice. G L.
Click to expand...
Click to collapse
thank you very much , i try it many time , but it didn't work...
PJ.C said:
I think the problem is not at recovery.img
well, and i can't get the phone wake now, how can i do ?
thanks very much.
Click to expand...
Click to collapse
first remove battery for 10 seconds then hold power down (or power up+ down not sure..but try both) + menu button and power button for few seconds and insert the battery while holding all the keys mentioned above. it seems complicated so u can ask for help from other person to insert the battery or u can do it yourself. even my galaxy ace was bricked several days back, these steps helped me to revive it back. i hope it helps u too.
abhiatreyas said:
first remove battery for 10 seconds then hold power down (or power up+ down not sure..but try both) + menu button and power button for few seconds and insert the battery while holding all the keys mentioned above. it seems complicated so u can ask for help from other person to insert the battery or u can do it yourself. even my galaxy ace was bricked several days back, these steps helped me to revive it back. i hope it helps u too.
Click to expand...
Click to collapse
is the HOME button or MENU button ? the MENU button is a virtual keys.
i try it too ,but didn't work.
keep hold volume up + HOME + POWER ,then insert the battery, not work.
keep hold volume up + MENU + POWER ,then insert the battery, not work too.
PJ.C said:
is the HOME button or MENU button ? the MENU button is a virtual keys.
i try it too ,but didn't work.
keep hold volume up + HOME + POWER ,then insert the battery, not work.
keep hold volume up + MENU + POWER ,then insert the battery, not work too.
Click to expand...
Click to collapse
its vol down+home+power
an0nym0us_ said:
its vol down+home+power
Click to expand...
Click to collapse
oh i am sorry ,but it not work too ...
then your ace is done for. sorry for your lost.
download mode and flashing via odin is sort of last resort, but even if it can go into download mode and can be flashed via odin, it doesnt mean it can be recovered.
earlier my ace got hardbricked too, can go into download mode, can be flashed via odin, but still stuck on booting. in the end i just send it for repair.
your case is even worse, cannot even go into download mode.
Flashing recovery....u mean ROM Manager?
Sent from my GT-S5830 using XDA
ROMFlasherAce said:
Flashing recovery....u mean ROM Manager?
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
NONONONONONONONONONONO.
Herpderp Defy.
ROMFlasherAce said:
Flashing recovery....u mean ROM Manager?
Sent from my GT-S5830 using XDA
Click to expand...
Click to collapse
yes , the way flash recovery like that .
All sellers of Galaxy Ace should be required to attach a health warning - DO NOT USE ROM MANAGER.
aha, good idea！
PJ.C said:
yeah, i didn't mount the partition before flash the recovery.img
why i use the difficult way is i want to try a different way to do a flash .
Click to expand...
Click to collapse
then you have been paid what you invested
don't do such R&D from next time
any help ?
Click to expand...
Click to collapse
only service center can help
madman_amit said:
then you have been paid what you invested
don't do such R&D from next time
only service center can help
Click to expand...
Click to collapse
i think so , thank you.
Related
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen after flashing froyo heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery and connect your galaxy ace to the computer;
Step 3 -- Insert battery holding Volume down + Power + Home
Step 4 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 5 – Click Start button in Odin and wait about 5 min.
If all goes well it should come back to life.
Get the roms from sammobile site.
Be sure that you download de correct firmware for your device version.
Good mannnnnn ֱ
SuperMini said:
How to unbrick Samsung Galaxy Ace
If your phone doesn’t boot into download mode and you have a black screen heres how you unbrick it, it worked for me .
Step 1 – Prepare odin with the firmware u want to flash (in my case was gingerbread 2.3.3) and get it ready to go;
Step 2 – Remove battery, SIM and SD card, next connect your galaxy ace to the computer;
Step 3 – Hold Volume down + Power + Home button at the same time;
Step 4 – Insert the battery and wait a bit;
Step 5 – At this point Odin should have detected your SG Ace ( Yellow rectangle should appear);
Step 6 – Click Start button in Odin and wait about 5 min.
If all goes well it shoul come back to life.
Click to expand...
Click to collapse
Don't work for me...
you saved my day
I was about to send my phone to support centre!
Cool, brought back to life.
I wish we had a thread listing all these tricks.
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution for that. Did you try making usb test jig?
Sent from my GT-S5830 using Tapatalk
isnwinyetra said:
my phone brick after flashing CWM from ROM manager and I've wrong choose phone type and then go to the phone shutdown (try to go to recovery mode). and the phone won't be turn on. I try this thread but did not work, my phone is won't show the download screen but it was detected by ODIN v4.38 and the yellow bar shown. But it was stuck on
<1> setup connection..
I try 3 file tar and 1 file Tar (one package) firmware just the same stuck on it.
please somebody help for the solution....
Thanks,
Click to expand...
Click to collapse
There is no solution, I know several cases where people destroyed their Ace this way.
Why do people even bother to pamper with their phones when they have no clue...
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
isnwinyetra said:
Not yet, ok i'll try using usb test jig, but there is any tutorial video to do this thread??
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Did it working???
Thanq... Thanq...
works fine for me.. great job.
what is the password on .rar files?
korbin3103 said:
what is the password on .rar files?
Click to expand...
Click to collapse
samfirmware.com
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
big thanks dude, this small help, really a big help
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
How did that happen? Did you try to install Clockworkmod recovery?
davebyone said:
My download mode do not appear..
Odin recognize the phone but stops on "setup connection..."
can you help me please???
Click to expand...
Click to collapse
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
forall.sri said:
Same here!!! download screen does not appear.
Tried downgrading from KPH(Code rom) to Froyo IN
Click to expand...
Click to collapse
Firstly close the KIES. If closed and Still nothing, try to change the connected PC USB port. Hope it helps!
CHEERS!
Hello everyone I have the Galaxy ace brick and download mode but does not exit by pressing the volume up + power + home connects to the PC but remains in connection with odin you can 'do something or should I send him to assist with
or tried to do a backup with Rom manager and is' off my rom 2.3.4 root
I remain blocked setup connection
Tanks
did u try to remove battery ?
if not try remove and enter download mode again, this should help u .
yes remove the battery and put it as a guide, I will connect if I press the volume up
tomorrow the port to help center
Thank you
how to exit from download mode? need to remove battery???
coolnand said:
how to exit from download mode? need to remove battery???
Click to expand...
Click to collapse
Yup pull battery out
Sent from my omega jellybean powered sgs 3
Don't remove your battery! Just press your power button and hold until phone reboot itself.
i9.0.1.3k galaxy imperator
coolnand said:
how to exit from download mode? need to remove battery???
Click to expand...
Click to collapse
If you flashed something via Odin from your computer, and if you did the correct steps (with default odin settings), then your device should reboot automatically by itself at the end of the process.
If not, you have two choices :
Let power off button pushed for some seconds until device turns off
Remove your battery
coolnand said:
how to exit from download mode? need to remove battery???
Click to expand...
Click to collapse
In the same way you entered it.. Press and hold power + home + volume down buttons
By the way I am typing from my phone.. So expect typos!!
simply keep on pressing the power button until your mobile restarts. job done. dont forget u should not do this when some file is being written in download mode.
bala_gamer said:
simply keep on pressing the power button until your mobile restarts. job done. dont forget u should not do this when some file is being written in download mode.
Click to expand...
Click to collapse
None of these methods work for me. All that seems to do it for me is a battery pull. Is there no other way? Holding power doesn't exit, nor any of the other things that people have said "work".
Ryezen said:
None of these methods work for me. All that seems to do it for me is a battery pull. Is there no other way? Holding power doesn't exit, nor any of the other things that people have said "work".
Click to expand...
Click to collapse
Maybe the rom wasnt flashed correctly
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi
not working
Ryezen said:
None of these methods work for me. All that seems to do it for me is a battery pull. Is there no other way? Holding power doesn't exit, nor any of the other things that people have said "work".
Click to expand...
Click to collapse
i cannot exit download mode.. i tried to power off,i took out the battery, but when i power on it is still in download mode ...help
is it a genuine I9300 ??
try one recovery mode
two flash a stock rom via Odin see if it recovers whats wrong
three service centre repair
zoot1 said:
In the same way you entered it.. Press and hold power + home + volume down buttons
By the way I am typing from my phone.. So expect typos!!
Click to expand...
Click to collapse
I just did it on S6. Thank you.
I wanted to install a new rom,I reboot my phone and I installed something what I found on my micro SD,I confused something with the file of new rom,and now it doesn't start, only what I see after 1 hour is the image of boot (Samsung Galaxy S II, like that image http://www.gophoto.it/view.php?i=htt...ootingsgs5.jpg)
What can I do to start my android ?
Sorry for my little english
it's pity....it's pity that you post your noob question in general forum.
about your "problem": do a wipe/factory reset from recovery, first of all. if your problem won't be solved then reflash any other firmware through odin
take your battery out, put it back
hold:
volume up + home + power, when GSII logo shows up release them, it will enter recovery mode
reflash your rom, kernel and stuff
if nothing works download odin (http://forum.xda-developers.com/showthread.php?t=1075278)
hold volume down + home + power, will enter download mode
from there you can flash stock ROM using odin. Take a look at the guide above.
post with more details next time.
Gustavo_s said:
take your battery out, put it back
hold:
volume up + home + power, when GSII logo shows up release them, it will enter recovery mode
reflash your rom, kernel and stuff
if nothing works download odin (http://forum.xda-developers.com/showthread.php?t=1075278)
hold volume down + home + power, will enter download mode
from there you can flash stock ROM using odin. Take a look at the guide above.
Click to expand...
Click to collapse
I tryed that before to post here,nothing work,I can't acces down + home + power or up + home + power .
Only what I see is the logo GSII,and when I try to connect on the recharger,the logo of buterry freezes.
Waith to restart 2 times with all 3 butons!!
Inviato dal mio GT-N7000 con Tapatalk 2
sakipis said:
I tryed that before to post here,nothing work,I can't acces down + home + power or up + home + power .
Only what I see is the logo GSII,and when I try to connect on the recharger,the logo of buterry freezes.
Click to expand...
Click to collapse
afaik if it the screen turns on, even only for SII logo, you can enter download mode.
with the phone turned off hold vol down + home + power it will show a warning screen.
if you can't do that then take to samsung repair center, they know how to do it.
Gustavo_s said:
afaik if it the screen turns on, even only for SII logo, you can enter download mode.
with the phone turned off hold vol down + home + power it will show a warning screen.
if you can't do that then take to samsung repair center, they know how to do it.
Click to expand...
Click to collapse
do you know to read? I sad: I can't acces up or down+power+home , can you see that?
sakipis they are trying to help you. Don't be offensive. What do u mean you cannot access up/down+home+power? Maybe you should press the power button after you have pressed the other two...
Sent from my GT-I9100 using xda app-developers app
I am also very curious what he installed to make his phone behave like this.
sakipis said:
do you know to read? I sad: I can't acces up or down+power+home , can you see that?
Click to expand...
Click to collapse
Man...U'd be kind as people tried to help u
Be sure u press buttons at phone off : power+home+vol down (together at same time & release just pow button while i9100 splash screen appears) >>>> it'll enter to download mode then u can advance to flash with Odin3 1.85 (this is the most compatible Odin w/ i9100).
if u couldn't access d/l mode by as per above make sure u've adb in ur PC, connect them by USB then type in adb terminal "adb reboot download" (without quotes) to enter d/l mode.
Neither means u've hardbricked ur phone..
Sent from my GT-I9100 using xda app-developers app
Cenobite_ said:
I am also very curious what he installed to make his phone behave like this.
Click to expand...
Click to collapse
Maybe it was the forum rules in pdf format........lol
Hm my bad,now it work,I was worng,I pressed other button.
Sorry for all because I was bad guy.
sakipis said:
Hm my bad,now it work,I was worng,I pressed other button.
Sorry for all because I was bad guy.
Click to expand...
Click to collapse
Nevermind... that's the most event happened if we're facing a softbrick for 1st time.. & don't panics.. there's always anyone will help u in xda.. be a kind & press thanks to anyone helped u..
Sent from my GT-I9100 using xda app-developers app
Hello Folks,
My brother ask me some help to restore his motorola Razor that dont startup anymore.
When we turn it on, we have this error message :
CustomerID error,Contact Dealer
Boot to Suspend/TCMD mode:dead:0007:00000000:000000cc
Click to expand...
Click to collapse
This is how it happens :
1. he install ICS succefully.
2. then he tryed to install JB thru Boot manager with a custom rom unsuccefuly
3. then phone stop to work.
4. i install him cyanogenmod and it works back.
5. then he tell me that he made some test and turn the phone off, and then the phone never starts up again and show this error message.
I've tryed to launch the factory mode with power + volume down, and power + volume up and down but it didn't change anything, it always launch with this error message.
Do you have any idea to get this problem solved ? i wish to set it back on the original updated rom if possible.
Do you think this "dead" message in the error message is critical ?
Thanks a lot for you help, if you have any question don't hesitate to ask.
Best regards
ps : i already read/try this answear on a related topic : http://forum.xda-developers.com/showpost.php?p=25382757&postcount=30 but as i say previously it didn't work.
Um !! This is first tread I'm seeing having this kind of problem but still If ya getting customer id error it means he has error the cid early to install different region fastboot files . I do not know if it is gonna work but power off ya RAZR
Press both vol down and vol up at a time and press power button that ll take ya to the stock recovery. Now go down and and select bptools and press vol up to select it . I hope that may on ya phone
Sent from my XT910 using Tapatalk 2
I have the same error after I unbrick my phone.
If you want boot your phone, try to hold power + vol up + vol down, choose BP tools.
after that you need to install BMM to bypass CID
Further more, I'm looking for how to get back CID to remove this error
teen9xpro said:
I have the same error after I unbrick my phone.
If you want boot your phone, try to hold power + vol up + vol down, choose BP tools.
after that you need to install BMM to bypass CID
Further more, I'm looking for how to get back CID to remove this error
Click to expand...
Click to collapse
Do ya have backup of ya cid . If yes ya can restore it easily with some commands . If not then then always ya need to power on ya phone using bptools
Please hit the thanks :thumbup: if i evet helped ya !!
Thanks guys for your help,
perhaps, as i say further :
I've already tryed to launch the factory mode with power + volume down, and power + volume up and down but it didn't change anything, it always launch with this error message and dont show the factory mode.
Hello guys, sorry to insist but dont you have any other ideas ?
i would really apreciate your help.
best regards
Do ya have backup of ya cid . If yes ya can restore it easily with some commands . If not then then always ya need to power on ya phone using bptools
Click to expand...
Click to collapse
wich command ? i can try i think he has a backup of cid
himselfprod said:
wich command ? i can try i think he has a backup of cid
Click to expand...
Click to collapse
You cannot restore you CID right now.
However can you ask your brother what tests did he do.?
The error isn't critical itself but the thing that you can't boot to recovery is strange.
Also,you sure the vol+ key is working right?
Sent from my XT912 using Tapatalk 2
i have a problem here my ace not boot right
its recovery plays crazy
cant boot in download modus
The correct combination is Volume Up + Volume Down + Power.
Even if it appears as just a black screen, it is Download Mode
Flash stock ROM through Odin
Flash it!
1.Pull out the battery!
2.Now keep pressing Vol down+vol up+Power
3.Insert the battery after the second step! (Use another person's help if needed)
4.COnnect to system!
5.Flash Stock firmware
iamareebjamal said:
The correct combination is Volume Up + Volume Down + Power.
Even if it appears as just a black screen, it is Download Mode
Flash stock ROM through Odin
Click to expand...
Click to collapse
okay thanks
but tried 2 pc not reconized my ace all driver on fresh installed
wwhat can be fault
abumaha said:
okay thanks
but tried 2 pc not reconized my ace all driver on fresh installed
wwhat can be fault
Click to expand...
Click to collapse
Try rebooting your PC
Sometimes it takes 2-3 attempts to install the drivers for making Odin recognize the phone