Related
No need for a long explanation, just a link or two, and/or some terms I can google for.
And, yes, I have been reading/searching the forum, and only find old posts mentioning Odin as a technique. Is there anything like SuperOneClick out?
Thanks!
Hi, Rooting through odin currently seems to be the most reliable and safest option.
There is other methods however can cause problems with the phone.
Head over to http://forum.xda-developers.com/showthread.php?t=1103399
Based on the current firmware download the cf root that matches it, extract it and flash using odin.
Hope this helps.
I literally just received my SGS2 about 2 hours ago and read a bit of the thread, not all considering how large it is.
I know this roots but does this unlock the BL at the same time since its installing CWM?
Sent from my SAMSUNG-SGH-I777 using xda premium
Up until recently, SGS2 bootloaders have been 'unlocked'. The easiest way to test this would be to try and use a jig to reset the flash counter on the phone after you've rooted it.
If you can't reset the counter, then the firmware that came with your phone has the locked bootloader (I'm sure someone will be along any second now & tell us exactly which version the bootloader started to be locked in . The details are somewhere on the forum).
Easy fix to this is to flash firmware that has the bootloader unlocked. Alternatively, you simply flash the old bootloader over whatever firmware you're running. This is also available on the forum *somewhere* (I don't have a link handy).
Edit to add - About halfway down the page in this thread , there's a section in bold red type which has a link to a tar of the old bootloader you can flash in Odin should you need to.
Auxilium said:
I literally just received my SGS2 about 2 hours ago and read a bit of the thread, not all considering how large it is.
I know this roots but does this unlock the BL at the same time since its installing CWM?
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
MistahBungle said:
Up until recently, SGS2 bootloaders have been 'unlocked'. The easiest way to test this would be to try and use a jig to reset the flash counter on the phone after you've rooted it.
If you can't reset the counter, then the firmware that came with your phone has the locked bootloader (I'm sure someone will be along any second now & tell us exactly which version the bootloader started to be locked in . The details are somewhere on the forum).
Easy fix to this is to flash firmware that has the bootloader unlocked. Alternatively, you simply flash the old bootloader over whatever firmware you're running. This is also available on the forum *somewhere* (I don't have a link handy).
Edit to add - About halfway down the page in this thread , there's a section in bold red type which has a link to a tar of the old bootloader you can flash in Odin should you need to.
Click to expand...
Click to collapse
Hi,
I've rooted my sgs2 using CF-Root, i found it better than OneClickRoot, reason for that is when i used oneclickroot the phone rooted then went back after i rebooted, which is weird. So i flashed CF-Root using ODIN and its perfect.
What I want to ask if you could help me please, is how can i see my flash counter? (if there is any)
and what is a jig, does it mean usb connection or is it a device i need to buy?
Thanks
Go into download mode (switch phone off - then do 3 finger reboot - hold home, volume down & power button at the same time), if you've flashed a non-stock rom/kernel in Odin it will show Custom binary download: x, where x is the number of times you've flashed a rom or kernel in Odin.
The jig is a usb plug with a certain amount of resistance over some of the pins of the plug (301k Ω or thereabouts I believe). To use it, you switch the phone off, plug the jig into the usb port on the phone, it reboots the phone into download mode and you'll get a message saying "Erasing download information successful". It will now show Custom Binary Download as no & Custom Binary as Samsung Official.
This will also get rid of the yellow warning triangle that appears at boot as long as you're using an "old" bootloader. Samsung recently started including "locked" bootloaders with their newer firmware in the last few months that don't allow a jig to reset the flash counter.
These cost a few dollars on eBay, do a search for "Samsung Galaxy S2 jig" or similar.
ab.riyami said:
Hi,
I've rooted my sgs2 using CF-Root, i found it better than OneClickRoot, reason for that is when i used oneclickroot the phone rooted then went back after i rebooted, which is weird. So i flashed CF-Root using ODIN and its perfect.
What I want to ask if you could help me please, is how can i see my flash counter? (if there is any)
and what is a jig, does it mean usb connection or is it a device i need to buy?
Thanks
Click to expand...
Click to collapse
Search for the zergRush method. Its the easiest one so far. I personally used odin to flash a rooted cf-kernel but used zergRush to root a friens sgs2 and its really easy. You must have the adb drivers installed for sgs3.
Sent from my GT-I9100 using Tapatalk
bobkoure said:
And, yes, I have been reading/searching the forum, and only find old posts mentioning Odin as a technique. Is there anything like SuperOneClick out?
Thanks!
Click to expand...
Click to collapse
Wanna bet 100$ that you didn't? Paypal only.
There's a ****ing sticky with one non-Odin method, which you just missed, because you were too busy furiously searching for other methods, which were also described many times in the same forums.
Hi kinda off topic, i already rooted my SGS2 by flashing insecure kernel from Odia for DXKL3 and rooting it then flashing back the original kernel. now i want to install CWM, I see a lot of guides and searched, all looks like that need to install a CWM enabled rom or use a kernel that is compatible with CWM, thats where the part i get confused since most of the guide points you to a diffrent kernel from the insecure kernel, cant you use the insecure kernel tha odia posted specific for my DXKL3? and i dont want to install a custom ROM just for CWM it would defeat the purpose since i want to back up my stock firmware.
MistahBungle said:
Go into download mode (switch phone off - then do 3 finger reboot - hold home, volume down & power button at the same time), if you've flashed a non-stock rom/kernel in Odin it will show Custom binary download: x, where x is the number of times you've flashed a rom or kernel in Odin.
The jig is a usb plug with a certain amount of resistance over some of the pins of the plug (301k Ω or thereabouts I believe). To use it, you switch the phone off, plug the jig into the usb port on the phone, it reboots the phone into download mode and you'll get a message saying "Erasing download information successful". It will now show Custom Binary Download as no & Custom Binary as Samsung Official.
This will also get rid of the yellow warning triangle that appears at boot as long as you're using an "old" bootloader. Samsung recently started including "locked" bootloaders with their newer firmware in the last few months that don't allow a jig to reset the flash counter.
These cost a few dollars on eBay, do a search for "Samsung Galaxy S2 jig" or similar.
Click to expand...
Click to collapse
Thanks for the explanation mate, so then the jig is a device to buy not just the normal usb wire.
I'm thinking of getting it but now that its useless if firmware wont allow counter resets using jig......
quick Q, is there another method of resetting the counter and removing the yellow triangle? (it doesnt matter to me but incase i need to take it back for warrantee id need to do that i reckon)
There's no other way to reset the counter that I'm aware of. There's another method you can use to get rid of the triangle tho. 2nd post of the CFRoot thread details how to do this.
I suggest you get a jig. For less than $5 the peace of mind having one gives you is priceless.
ab.riyami said:
Thanks for the explanation mate, so then the jig is a device to buy not just the normal usb wire.
I'm thinking of getting it but now that its useless if firmware wont allow counter resets using jig......
quick Q, is there another method of resetting the counter and removing the yellow triangle? (it doesnt matter to me but incase i need to take it back for warrantee id need to do that i reckon)
Click to expand...
Click to collapse
i used the zergrush exploit, worked fine
http://forum.xda-developers.com/showthread.php?t=1319653
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Bump I really, really need this. I won't be able to update for weeks or a month if not.
also, when Kies recognizes it (1 in 1000 times) it says "Your device does not support software upgrading via Kies". I am unrooted and on stock rom.
http://forum.xda-developers.com/showthread.php?t=1763634 first link in post #5 unzip and place in pda slot in odin
or you could just root your phone and flash an ICS rom
XDA is no longer worth my time.
TimOster said:
OK, try Kies one more time. FIRST uninstall and reinstall the Samsung Mobile Device Driver. Just to be sure since you seem to be having connection problems.
Then...
Put Note into Download mode with no USB connected.
Start Kies (must be latest version ....12064_9...)
Plug in the USB (Note and PC)
Select > Tools > Firmware Upgrade and Initialization
THIS WIPES YOUR PHONE! But when it completes you are at the latest FW, currently ICS. It WILL do it even if Kies never says it connected first. I did this with my soft bricked Note that wouldn't boot completely.
Click to expand...
Click to collapse
Fixed, had tried that 10 times, but tried on another computer and it worked.
Also, now how to root and keep stock? Pref. A stock kernel. Or rerouted kernel. Or the easiest way
Is there a light at the end of the tunnel for me?
Buddy39914 said:
After a day and a half of trouble and stress using Kies, I wonder if there is anyway of getting the stock AT&T ICS ROM (the one that I would get if I upgrade using Kies) without using Kies, like downloading and flashing in ODIN or some other method. Because using Kies is impossible.
Click to expand...
Click to collapse
I have been trying to outsmart Samsung Kies since the update came out. I could not wait, like many of you guys, and decided to try out some custom ROMs, so I was not allowed to download the update because of the firmware message. I've downgraded to stock Gingerbread ROM, reset the binary flash counter, and wiped all the data on my phone, yet it is not enough.
When i did the *#1234# thing, I got PDA: I717UCLA1 (which was the same code as my CSC before I reset the flash counter), Phone: I717UCLC5 (the last ROM I was on), and CSC: I717ATTLA1 (what I think I need them all to be).
Since there has only been one official firmware version, 2.3.6, aside from the ICS I want, I can't make my phone think I have only been on stock firmware for the past two flashes. I'm totally screwed unless someone makes the Kies version flash-able through ODIN or tells me I'm an idiot and hands me the solution to cracking Kies on a silver platter!
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
You guys know how much easier it would have been to just to flash clockwork recovery mod right? You could download and flash roms without a computer or USB cord all day.
Sent from my SAMSUNG-SGH-I717 using xda premium
Buddy39914 said:
Do the method that If you open Kies then go to Tools then Firmware upgrade & initialization, it asks for two pieces of info about the phone. The S/N & model number. Enter them exactly as is (back of the phone behind the battery) use SGH-I717 as model (capital letters). Worked for me. If it doesn't, try on another pc.
Also, now signal seems a lot weaker, fix?
Click to expand...
Click to collapse
I'm on a Mac and when i click on Tools, i get this: Emergency firmware recovery, Firmware upgrade settings, and Install driver
When i go to Firmware upgrade settings, i see a blank box. I feel like the Kies update itself didn't work properly because it goes to 100%, asks for my computer password, then just freezes there until i click cancel at the bottom.
Help.
Hello, I just got a Samsung Galaxy S2 from a friend (Stock firmware GB 2.3.3)
For some reason I am not able to establish a connection between the phone and the PC.
I tried to install and reinstall Kies and/or the drivers multiple times (and everyone of the other suggestions i found with google) but with no success. The phone recognizes that it's been charged when the cable is plugged in and sometimes the phone even indicates that it's establishing a connection to kies (but this appears randomly, not always). On the PC there's no sign of any connection to the phone, neither Kies connects to it nor the phone is shown as any kind of device in the device-manager or in explorer ("adb devices" and Odin also don't recognize the phone).
Since my fathers S2 (2.3.6 Stock Firmware) connects fine with the same drivers and cable i finally gave up searching for any any other possible reason than a damaged connector on the phone.
So i tried to search for ways to root the phone, put CWM on it and a custom ROM without any PC connection.
I encountered some things like signed custom kernels that should grant you root access, an exploitation, ...
The exploitation didn't work out for my phone, and the kernels I've found are for Jellybean or ICS, so not suitable for my Gingerbread-Firmware,
I've found some older threads on various websites that promised such kernels for Gingerbread, but there were either dead links or nothing suitable for my phone.
So now I'd like to ask the community if anyone knows any signed kernel to gain root access for my phone, or any other way to accomplish my task of upgrading to a custom firmware, or if there's no possible way to do this and I should stop wasting m time on this...
(btw, for some reason the update of the firmware via WiFi doesn't work either, so I would be glad if anyone just knows a way to upgrade to a newer stock-firmware)
My phone:
model: GT-I9100
Android: 2.3.3
Baseband: I9100NEKD5
Kernel: 2.6.35.7-I9100XWKE1-CL181974
Buildnr.: GINGERBREAD.XWKE1
thank you all in advance
Can you download and install the latest version of Odin and check if it recognises that your phone is connected?
Let me know
Sent from my GT-I9100 using Tapatalk 2
You can try ExynosAbuse ( http://forum.xda-developers.com/showthread.php?t=2050297) for rooting; not sure if it works for gingerbread though.
Once you're rooted you should be able to flash cwm with MobileOdinPro (costs 5 bucks; https://play.google.com/store/apps/details?id=eu.chainfire.mobileodin.pro)
Sent from my GT-I9100 using xda app-developers app
MarkyG82 said:
Disi01
Try these:
Boot to recovery and factory reset (backup any pics etc if required)
Set debugging in usb access
Try other usb ports on the pc.
I wanted the same thing untill it took me 2 weeks to decide I wanted to flash in odin. Swapping to a different port gave me access.
Good luck.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
This is what I tried too and for me it didn't work. I got the same problem as TO. I'm going to try some more stuff and if it would work i'll let you know and will follow this.
ps. I even have switched the board inside with the micro usb connector. Didn't work. I am on 4.0.4.
I already tried if Odin recognizes my phone -> no success...
I also tried ExynosAbuse before, it tells me when I start the app made by chainfire, that my device is unable to be rooted via this method.
And I've already tried to connect through every single port on every single computer that's available to me, still no success...
The only chance a can see right now might be to find a signed kernel that gives me root-access via the "install update from SD card" function, I've already found a few, but none of them was suitable for my device...
The problem is that this firmware apparently is that "old", that most of the results when searching for this topic are JB or ICS-related.
disi01 said:
I already tried if Odin recognizes my phone -> no success...
I also tried ExynosAbuse before, it tells me when I start the app made by chainfire, that my device is unable to be rooted via this method.
And I've already tried to connect through every single port on every single computer that's available to me, still no success...
The only chance a can see right now might be to find a signed kernel that gives me root-access via the "install update from SD card" function, I've already found a few, but none of them was suitable for my device...
The problem is that this firmware apparently is that "old", that most of the results when searching for this topic are JB or ICS-related.
Click to expand...
Click to collapse
You really gotta get your device rooted and flashed (mobile odin pro might is a good choice)
Don't you have an External SD card? if not, I'm sure you know someone who does.
Once you get it, you can get your device rooted & flash whatever you want via recovery.
And remember, you can always say to your dad "hey old man, how about this: I give you my phone, and you give me yours".
gastonw said:
You really gotta get your device rooted and flashed (mobile odin pro might is a good choice)
Don't you have an External SD card? if not, I'm sure you know someone who does.
Once you get it, you can get your device rooted & flash whatever you want via recovery.
And remember, you can always say to your dad "hey old man, how about this: I give you my phone, and you give me yours".
Click to expand...
Click to collapse
Yes, I do have an external SD card, but as far as I know, to flash your phone via MobileOdin it needs root access, and I still haven't figured out how to grant my applications root access on this device without any PC connection... I haven't found any useable kernel/update yet that helps me with my problem and can be installed without the phone being rooted already... If you know one, I would be glad if you could tell me
I already tried to negotiate with my dad but he doesnt seem very cooperative. He didn't like the fact that my phone has an older firmware than his and that I haven't found a way to update it... (Somehow the firmware-update via WiFi doesn't work too, it tells me everytime that the phone failed to connect to the server)
disi01 said:
Yes, I do have an external SD card, but as far as I know, to flash your phone via MobileOdin it needs root access, and I still haven't figured out how to grant my applications root access on this device without any PC connection... I haven't found any useable kernel/update yet that helps me with my problem and can be installed without the phone being rooted already... If you know one, I would be glad if you could tell me
I already tried to negotiate with my dad but he doesnt seem very cooperative. He didn't like the fact that my phone has an older firmware than his and that I haven't found a way to update it... (Somehow the firmware-update via WiFi doesn't work too, it tells me everytime that the phone failed to connect to the server)
Click to expand...
Click to collapse
lol, okay, stop and read for a min.
You can root your device with that SD card.
Read this guy's method.
After you root it, you're up for some flashing.
But take it one step at the time.
If we get you to flash a nice looking ROM, your dad's gonna say something like this "hey, that's a nice looking OS you got there, how about I give you mine + 100 bucks"
About the OTA (over the air) update, I recall reading something about it. I'ma see if I can find a thread about that.
Also, you might like to try removing kies from your system (every last trace of it) and reinstalling the latest version. Then try connecting the phone again.
Sent from my GT-I9100 using Tapatalk 2
gastonw said:
lol, okay, stop and read for a min.
You can root your device with that SD card.
Read this guy's method.
After you root it, you're up for some flashing.
But take it one step at the time.
If we get you to flash a nice looking ROM, your dad's gonna say something like this "hey, that's a nice looking OS you got there, how about I give you mine + 100 bucks"
About the OTA (over the air) update, I recall reading something about it. I'ma see if I can find a thread about that.
Click to expand...
Click to collapse
Dude. That method (Rachmat3's) only works for ICS. He's on GB.
ctomgee said:
Dude. That method (Rachmat3's) only works for ICS. He's on GB.
Click to expand...
Click to collapse
Quantity rather than quality lol.
Yes, this method doesn't work on GB, I've tried this before with a huge load of different CWM-bootloaders from a lot of different sources and it always throws an "signature verification failed" or "failed to verify whole-file signature" error or both...
Isn't there any similar way to do this on GB? I've been an iPhone user for a few years now and didn't check the android hacking/modding community very often and because of this I'm not aware of any rooting methods that may have been available back then...
All you need to do is use the exynos exploit to gain root. You can do this via a simple apk.
Once you have root install Mobile Odin and flash Siyah kernel (.tar) to get custom kernel, cwm recovery etc.
Then you're off! Just reboot into recovery and wipe/flash away :good:
ctomgee said:
Dude. That method (Rachmat3's) only works for ICS. He's on GB.
Click to expand...
Click to collapse
ooops.
disi01 said:
I also tried ExynosAbuse before, it tells me when I start the app made by chainfire, that my device is unable to be rooted via this method.
Click to expand...
Click to collapse
Unfortunately the ExynosAbuse-method isn't an option for me neither...
EDIT:
found this in the changelog of ExynosAbuse (added in v1.20):
- Gingerbread-related fixes - note that not all Gingerbread firmwares of affected devices are vulnerable (for example, I know several SGS2 GB firmwares are not exploitable)
I think that unfortunately I have one of those firmwares...
What about changing the usb board.
If nothing else works this will be my last option in the end i guess, but I'd rather prefer a software-based solution because I assume it might be a bit cheaper
Looks like your only option to me.
try this
open the phone dialer
enter *#7284#
then make sure your phone is set to usb mode
you can try switching it to modem or the other option then reboot phone
then enter code again and pick usb option
you might need to reboot again
I had a problem in the past where USB would not connect and when I did the above it worked.
droiduzr2 said:
try this
open the phone dialer
enter *#7284#
then make sure your phone is set to usb mode
you can try switching it to modem or the other option then reboot phone
then enter code again and pick usb option
you might need to reboot again
I had a problem in the past where USB would not connect and when I did the above it worked.
Click to expand...
Click to collapse
You, Sir, are my personal hero from now on I couldn't really try by now if this solved the problem with the USB-connection, but somehow it solved the problem with the firmware-update per WiFi, and now I was able to update to the newest ICS-firmware available to my device. And hopefully I will be able to root it now with one of the signed kernels available for ICS-firmware
Hi All Below I occidentally posted in the Galxy SI900 instead of here< I got the usual replies but was grateful all the same. Maybe someone might help before I revert to stock...
Hi all, I know this has been done and dusted but I am having problems with connecting to kies after rooting. I am running standard jelly bean 4.1.2 and is an Australian GT-I9100. I installed the siyah kernal root system and now all I get on kies is "connecting" Windows 7 recognises and I can access the phone via explorer on the PC. The phone after a while comes up with a message that there is no compatible software on the PC, install kies...
I have tried all the so called fixes including formatting the internal SD and memory. The only thing I did before it stopped connecting was the root and running Triangle away (paid version). I have enabled / disabled USB debugging. The only things I haven't tried is a factory reset which I don't really want to do as I am always sceptical that the backup apps will work after to restore everything.
Any help appreciated
Click to expand...
Click to collapse
The thread is here: http://forum.xda-developers.com/showthread.php?p=45907982#post45907982
Hope someone can help...
Regards Ismael
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
jiseuo said:
Did you try another PC or reinstall Kies? To know if the problem is in the phone or in PC?
Click to expand...
Click to collapse
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
IsmaelJones said:
Yes, Kies definitely sees the phone as it comes up with GTI9100 loading on the left top and in the centre it just sits saying connecting. I think the phone is not seeing kies as the message on my phone always comes up only when trying to connect to kies.
I have tried 3 computers/laptops same result. Different USB cables original plus other really high end ones also. No Joy. Looks like if I want to connect to kies I must revert back to stock kernal as the firmware I never changed it is the OTA from samsung 4.1.2 and rooted the S2 only...
Also Not knowing Samsung but in the about on my Motorola Tablet/phone even when rooted when you try to check for updates they say none available, the samsung actually says "Your device has been modified, no updates available"...
Click to expand...
Click to collapse
Now I am not using KIES, because I use AOSP ROM (4.3 Slimbean), but in past, when i was using STOCK ROM (XWLSN, XWLSS) I used "PhilZ-cwm6 - Safe Stock Based Kernel" http://forum.xda-developers.com/showthread.php?t=1877270 to root my phone.
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
jiseuo said:
If I remember correctly, KIES was working with PhillZ, but it is few months ago ...
So you can try PhillZ and see If it will work.(If do not need any special feature from syiah kernel of course)
Click to expand...
Click to collapse
Okay had a look at this, thanks. I do have a question though, my Kernel (PDA) is XWLSH, I have downloaded the 2 files but I am wondering how to install? Do I use my CW recovery or do I have to revert back to stock? A little confusing as he dowsn't really give instructions and I am pretty much an amateur when it comes to some of these things? Also I am running JB 4.1.2 he only mentions ICS 4.0.4? Help appreciated here...
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
IsmaelJones said:
Actually just re-read the post and I think I know now what to do. Correct me if I am wrong but the 2 files I downloaded are for 2 different methods of installing, the Zip file via SD card and the MD5 file by odin. Is this correct?
Click to expand...
Click to collapse
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
jiseuo said:
Yes. ZIP is for flashing from recovery and tar.md5 is for flashing from ODIN.
Maybe the best way will be to reflash your whole stock firmware to get correct previous state before you started flashing syiah. You can get it on Sammobile.com - (simple registration needed) and then use PhilZ recomended method - flash ZIP from stock recovery
What is your Country / operator, Try this http://www.sammobile.com/firmwares/2/ to find right and latest oficial firmware for your country / operator version for your phone.
edit: For XWLSH it may be GT-I9100LKJXSA - unbranded australia version, or GT-I9100LKJOPS - Australia OPTUS operator customized version.
Click to expand...
Click to collapse
Hi Again, solved the problem... definitely the siyah root was the culprit. I used mobile Odin to install the stock kernel, once done checked and could connect in kies and was still rooted missing busybox only. After that I again used mobile odin to install philZ, again no problems and all seems fine now. Everything working.
Thanks a million for helping and also many thanks to mobile odin developers as this is a far better tool than most and saves connecting to the PC Odin. Also seems a lot safer...
:good:
I have to upgrade my My Samsung Galaxy S-II from Gingerbread to Jellybean
my but mobile does not connect with PC as USB connector is broken.
So, up-gradation with Odin or Kii does not support.
Alternatively, I have to update over OTA but mobile says that the latest updates have already been installed.
So i found an option in Boot Menu which says "Update from SD Card"
Now my question is that:
If I place official jellybean file in Phone Memory or Memory Card
Will it be update from there?
if Yes, kindly guide me.
If not then kindly also guide me how to update my Galaxy-S2.
Regards.
The very first thing you have to do is get the USB port fixed.
Modifying the software on a phone will *ALWAYS* carry an element of risk......
Sometimes, if things go wrong, the only way to put them right is to flash a firmware with odin.......
How do you use odin?
You install it on your PC and connect your phone to your PC via a cable and the USB port.....If your USB port is broken, you have a device you can't fix.
I personally would advise you NOT to modify your device until you have the port repaired.....
If you want to try it yourself, I wrote a guide which explains exactly how to do it.....
http://forum.xda-developers.com/showthread.php?t=2335961
Read the first post IN FULL before attempting to do it and pay particular attention to the section concerning 'REV VERSIONS'.....it is critical to successfully repairing your phone.
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
The very first thing you have to do is get the USB port fixed.
Modifying the software on a phone will *ALWAYS* carry an element of risk......
Sometimes, if things go wrong, the only way to put them right is to flash a firmware with odin.......
How do you use odin?
You install it on your PC and connect your phone to your PC via a cable and the USB port.....If your USB port is broken, you have a device you can't fix.
I personally would advise you NOT to modify your device until you have the port repaired.....
If you want to try it yourself, I wrote a guide which explains exactly how to do it.....
http://forum.xda-developers.com/showthread.php?t=2335961
Read the first post IN FULL before attempting to do it and pay particular attention to the section concerning 'REV VERSIONS'.....it is critical to successfully repairing your phone.
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
Ok thanks, brother, i will do as you advised. but only tell me one thing.
What will happen if I place official jellybean file into Sdcard and then from boot menu i choose "Update from SD Card"???
Will it be updated ?
Afaik it won't work.......
I think you use the stock recovery to flash only zip files.......
Firmwares come as .tar files which recovery can't deal with......
http://i.imgur.com/rVnFwJM.jpg
You can try using mobile ODIN: http://forum.xda-developers.com/showthread.php?t=1347899
I think you are not receiving OTA updates because probably your phone carrier stopped shipping updates ages ago.
Of course you will need a rooted phone to do this. You will need to download the latest firmware onto your phone (you can download from sammobile.com), unzip it with es file explorer or alternative file manager, then select the files according to the corresponding categories.
Alternatively (and I think this is a much safer option, but can be tedious for new users), root your phone with a custom gingerbread kernel or cf-auto-root, install a jellybean compatible recovery or jelly bean kernel such as apolo kernel, then install a stock based rom such as neatrom (I will give instructions if you decide to do this way). This way, you still have a newer version of android minus all of the bloatware from samsung.
In other words, without root and OTA updates from phone carrier, you pretty much left with no option but to fix the usb port on your phone.
regards, gsstudios.