Hello,
I have sony Xperia S and I installed Different FIRMWARE.
now i dont know how to Install the Default FIRMWARE that come with the phone.
plus i can't update Through the Sony PC Companion.
where can i download the Official FIRMWARE and how can i Install her on my phone?
thanks
you can.
Just turn off the phone, open Pc Companion, go to Support Zone,
click Start on "update phone" then click at "repair phone" then follow on screen instruction in how to "repair" the phone... this will flash original firmware for your locale, and erease any data on the phone...
when i do this its write that the FIRMWARE has Changed and cant be update.
what am i doing worng?
maor44 said:
when i do this its write that the FIRMWARE has Changed and cant be update.
what am i doing worng?
Click to expand...
Click to collapse
Can you give me your customization Number? it's an 8-digit number when you open the back cover, (xxxx-xxxx) I can see if i can retrieve a firmware for you.
12575189
Thanks
Need help Offical frimware Xperia S
I had a same problem Where can I find offical frimware Xperia S
Here is SI:1262-5361
thanks for your helping..
http://forum.xda-developers.com/showthread.php?t=1599303
Have you ever unlocked bootloader? If so, please try relock it first and then repair your phone in PCC as NightSky256 suggested.
NightSky256 said:
you can.
Just turn off the phone, open Pc Companion, go to Support Zone,
click Start on "update phone" then click at "repair phone" then follow on screen instruction in how to "repair" the phone... this will flash original firmware for your locale, and erease any data on the phone...
Click to expand...
Click to collapse
Does this actually work ?
Related
my x10i reflash stock firmware ... but after the part to key in sim card pin code... den inside get nth... hw to recover it.. anyone help =]
deathnature said:
my x10i reflash stock firmware ... but after the part to key in sim card pin code... den inside get nth... hw to recover it.. anyone help =]
Click to expand...
Click to collapse
Please type your words out or in an understandable form.
i flash the stock firmware.... but when first boot.... after i key in the pin code... i juz get nth in my screen... no setting up o wat... its juz blank...
deathnature said:
i flash the stock firmware.... but when first boot.... after i key in the pin code... i juz get nth in my screen... no setting up o wat... its juz blank...
Click to expand...
Click to collapse
Heard this before somewhere, did you upgrade it from a lower firmware? Which firmware were you on and which did you flash specifically? Best option is to reflash a stock firmware via flashtool or do a repair via SEUS if you're still on your phone's original firmware version. See if that helps.
seus also cant =[
i flash many new rom... but y my sim card cant functionable?
deathnature said:
i flash many new rom... but y my sim card cant functionable?
Click to expand...
Click to collapse
Is your sim card a different network to the phone's original network?
huh.... before it stil can use... bt since i flash new rom it cant use edi
seus even also cant help -.- i duno wat happen.... all sim card is unfunctionable
deathnature said:
seus even also cant help -.- i duno wat happen.... all sim card is unfunctionable
Click to expand...
Click to collapse
The phone may be network locked, but you said it worked before, therefore, kindly tell how you go about flashing the firmwares and which firmware files you flashed to your device?
X10i_2.0.A.0.504_MSTAR-ES+GENERIC+1234-7515
X10i_3.0.1.G.0.75_CUST-AE+GENERIC+1238-8010
X10i_3.0.1.G.0.75_CUST-MY+GENERIC+1237-0695
tis 3 .... i flash bak to 2.0 to unlock bootloader... but failed... so i flash bak... but everything cant use....
Turn your phone off, take the battery out and open up flash tool.
Choose flash and pick the firmware you want to flash to your phone, advisably a world generic version would be a good option.
Click ok to flash, plug the usb cable into your phone, when it says to connect device on flash tool, hold the back button and put the battery in, should go directly to flash mode, wait for it complete, once completed. Try turning it on again, but one quick question, did you try unlocking the bootloader?
ya... i am try to unlocking it... but failed try many time...
deathnature said:
ya... i am try to unlocking it... but failed try many time...
Click to expand...
Click to collapse
That sir may be your problem, which of the batch files did you use? the semc_qd8250 or setool_qd8250? Did you unlock your phone by chance? Because if you did with any other tool than the setool or you used the incorrect batch file, then you will lose radio signal as warned in the dev thread of unlocking the bootloader.
first i use the mayazcherquoi bootloader unlock... but cant...
den ltr i use the qsd8250_semc .... how to solve it
deathnature said:
first i use the mayazcherquoi bootloader unlock... but cant...
den ltr i use the qsd8250_semc .... how to solve it
Click to expand...
Click to collapse
Did you have debug mode on before you tried to do it?
Use this tool here: http://forum.xda-developers.com/attachment.php?attachmentid=713763&d=1315496032
and tell me what it says at the end of the log. Whether it is "SEMC SIMLOCK CERTIFICATE RECOGNIZED" or "SIMLOCK CERTIFICATE NOT RECOGNIZED".
Run the tool, click do job, put the phone into flash mode, choose x10 where is says S1 and click do job once more.
Hi, hi have unlock my phone with the ground point method so i think that i have the bootloader unlocked. I have updated two times my phone first with fota and than with wotan both of them bricked my phone, i was able to restore it.
Hoe i have to do for update my phone without have a brick every time?
How can i check if i have the bootloader unlock?there is any app in the market to check it?
Thanks
Go to dialer and press *#*#service#*#* (service being the numbers 7378423)
Then there a option you can look at which tells you if bootloader is unlocked
Although by the sounds of it, it is
Hit thanks if I helped!
Best regards
Sent from my MT15i using xda premium
atk25 said:
Hi, hi have unlock my phone with the ground point method so i think that i have the bootloader unlocked. I have updated two times my phone first with fota and than with wotan both of them bricked my phone, i was able to restore it.
Hoe i have to do for update my phone without have a brick every time?
How can i check if i have the bootloader unlock?there is any app in the market to check it?
Click to expand...
Click to collapse
You can try flashing custom kernel via fastboot, and start phone.
About wotan server, you must be doing something wrong, because if you unlocked BL by test point, you can use SEUS, PC companion or wotan server.
waynekirby said:
Go to dialer and press *#*#service#*#* (service being the numbers 7378423)
Then there a option you can look at which tells you if bootloader is unlocked
Click to expand...
Click to collapse
If you mean on Service info->Configuration
No it wont
It just say if your BL is unlockable.
Hey,
im using x10 mini pro Nordic phone, and since my very first root and CMW install i cannot get back to the right firwmare, i always end up getting via pc companion or seus UK or any other with different key layouts (wich i solved but still not the same as it was originaly)
so i found a solution by changing region number in build.prop
I had changed the region to nordic one (the region code was written on the package box) 1238-9136
and now when i try to update via Seus or PC companion i get these, 1st it says software is up to date, then when i try to repair it says downloading and then "there is no software available for your phone, please try again"
Can anyone help me? or at least upload the NORDIC tft or zip (to install CWrecovery or flashtool) ?
thanks!
I had the same issue, but when returning from custom nAa kernel back to stock... SEUS/PCC gave me the same error message... the way I got it to work was to relock the bootloader... than PCC was able to complete the repair phone process...
Please press 'Thanks' if it helped!
unfortunetly my bootloader isnt unlocked, i kept stock kernel
guys I just wanna ask if its possible to unlock the bootloader on my xperia ray using testpoint method in bricked state?
my phone is stuck on sony logo and wont boot. I've tried everything from flashing official stock .42 and .62 rom, s1 restore, update using SEUS and repaired using PC Companion but it's still stuck on sony logo. I'm running out of options here. Please share your thoughts and opinions I'd appreciate it, thanks
Are you flashing the right ftfs?
I KNOW that u can unlock via official method in bicked state. Don't know about testpoint though
Btw are you sure your flashing is right
Regards
-N
XperienceD said:
Are you flashing the right ftfs?
Click to expand...
Click to collapse
I think so.. I DLed the .42 and .62 firmwares from this link http://talk.sonymobile.com/thread/35239
I also tried the stock ICS 4.1.B.0.587 the logo changed from Sony Ericsson to Sony, still stuck on the logo though
Then I noticed something http://prntscr.com/11msuv
I flashed the stock ICS 4.1.B.0.587 and reflashed it again but the version did not changed
INFO - Current device : ST18i - BX902WWWDP - 1252-5335_R5D - 1248-9545_4.0.2.A.0.42 - WORLD-i_4.0.2.A.0.42
is this normal?
mnishamk said:
I KNOW that u can unlock via official method in bicked state. Don't know about testpoint though
Btw are you sure your flashing is right
Regards
-N
Click to expand...
Click to collapse
I followed flashing procedure carefully and downloaded official firmwares but still stuck on the sony logo
I might just try that official method and reasearch more first, btw is there some way to identify my IMEI or MEID w/o opening the dialler? I think the official method requires it and I can't get past the boot screen to open my dialler
Jake_boo said:
I followed flashing procedure carefully and downloaded official firmwares but still stuck on the sony logo
I might just try that official method and reasearch more first, btw is there some way to identify my IMEI or MEID w/o opening the dialler? I think the official method requires it and I can't get past the boot screen to open my dialler
Click to expand...
Click to collapse
Most probably your imei is stored in your google account you can access it from a pc (somewhere in gmail)
If it doesn't work, there an adb command to get imei from the device just connect device and run the command (google for it)
Regards
-N
mnishamk said:
Most probably your imei is stored in your google account you can access it from a pc (somewhere in gmail)
If it doesn't work, there an adb command to get imei from the device just connect device and run the command (google for it)
Regards
-N
Click to expand...
Click to collapse
thanks for the info :good: