In the name of AllahHi
I have installed new gtalk app with voice and video.
I tested on cyangenmod version 128 nightly.
1)download the flashable package form attachment
2)You can download unflashable archive package on attachments.
how to install:
1-restart your HTC Wildfire to Recovery Mod
2-Connect your USB cable
3-Run CMD and go to adb folder
4-Go to 'partion menu' and mount system partion
5-type this commands:
Code:
adb push [type_address_of_extracted_archive_folder]\Talk2.apk /system/app/Talk2.apk
Code:
adb push [type_address_of_extracted_archive_folder]\libtalk_jni.so /system/lib/libtalk_jni.so
Code:
adb shell mv /system/app/Talk.apk /system/app/Talk1.apk
Code:
adb shell mv /system/app/Talk2.apk /system/app/Talk.apk
6-Reboot your phone
7-Dont forge click on THANKS button!
Finished!
Ok, it will work for chat, but did you try with voice or video chat?
Hi guys .. i am using htc hero(t-mobile g2 touch)..i tried flashing clockworkmod recovery using adb,rom manager and terminal emulator..here is what i got
adb--cannot stat 'recovery-clockwork-2.5.0.7-hero.img': no such file or directory
for terminal emulator--error no such file or directory
for rom manager--unable to contact server
please help ..is there other way or did i make mistake??
thanks in advance
I'm a noob but did you by chance forget to Root your device?
Is it a .zip or .img file?
I'll give you a simple tutorial
1. Right-Click platform-tools and click Open CMD from here.
2. To be sure the device is detected do
adb devices
Click to expand...
Click to collapse
2.1 (optional) If no device is detected follow this tutorial.
3. extract the zip file to platform-tools and put the .img file in the same folder.
4. type the following commands:
adb push recovery-clockwork-2.5.0.7-hero.img /data/local/
adb push flash_image /data/local/
adb shell chmod 777 /data/local/recovery-clockwork-2.5.0.7-hero.img
adb shell chmod 777 /data/local/flash_image
adb shell rm /data/local/rights/mid.txt
adb shell ln -s /dev/mtd/mtd1 /data/local/rights/mid.txt
adb reboot
Click to expand...
Click to collapse
5. the device will reboot wait until it is on the homescreen again.
6. then type the following command:
adb shell /data/local/flash_image recovery /data/local/recovery-clockwork-2.5.0.7-hero.img
Click to expand...
Click to collapse
7. and you are done
Hi guys
I've imported the SH-06D from Japan and the phone is running great, however I'd like to remove some system apps etc to help speed up the phone (it's still on 2.3.5) and obviously tweak it as well.
I know there is an existing thread on the SH-01D (predecessor to the SH-06D) but I'm wondering if anyone has successfully rooted the SH-06D and if so, is there an (easy) process to do this?
Another reason I want to root, is to install the UI from the upcoming Evangelion Nerv edition of the SH-06D that is due to be released in a few days.
ICS for the SH-06D is just around the corner (due to be released in July) but I'd realy appreciate any help, assistance or tips in rooting the phone as it is now.
Cheers! :fingers-crossed:
Anyone?
:-(
here is a link to root the sh-06d :
http://itsuki.ddo.jp/gadget/index.php?SH-06D
THANK YOU!
Have you tried this method and does it work? Can you assist me in following those directions?
Cheers
interfreak said:
THANK YOU!
Have you tried this method and does it work? Can you assist me in following those directions?
Cheers
Click to expand...
Click to collapse
i haven't tried since i don't have this phone.
i can try to help you if you want.
testnumero said:
i haven't tried since i don't have this phone.
i can try to help you if you want.
Click to expand...
Click to collapse
Thanks mate!
I'm fumbling through the process now - it's a little hard when you are using google translate lol!
OK, I've run through all the steps but..
When I get to the end of the process:
C:\Users\interfreak\Desktop
$ su
su
su: permission denied
:-(
interfreak said:
OK, I've run through all the steps but..
When I get to the end of the process:
C:\Users\interfreak\Desktop
$ su
su
su: permission denied
:-(
Click to expand...
Click to collapse
i don't know what is the problem, try to do steps again.
Tried, same result. :-(
interfreak said:
Tried, same result. :-(
Click to expand...
Click to collapse
i'll ask to translate it
Thanks mate!!! :highfive:
I want to know untill now has SH-06D been rooted?
I wish someone could dump ROM or launcher from SH-06 NERV version:fingers-crossed:
I'm working on the translation for root on Sharp Aquos SH-06D.
Please give me one or two more days!
That is highly impossible, having full root in J Phone are hard enough. Unlocking the bootloader is a wet dream for almost everyone who likes J phone
lightout said:
I want to know untill now has SH-06D been rooted?
I wish someone could dump ROM or launcher from SH-06 NERV version:fingers-crossed:
Click to expand...
Click to collapse
I'm trying to hard reset my SH-06D, but I can't do it via settings-privacy. I can select to wipe, but nothing happens.
Any suggestions?
I got the Nerv edition
Hey man, how did the rooting go? I ordered the Nerv edition of this phone, and I want to root it (mainly to pair my sixaxis controller for psx emulation) but wanted to consult with you first as a precaution.
Here is the a rough translation of the root guide found here:
http://itsuki.ddo.jp/gadget/index.php?SH-06D
Big thanks to testnumero for the help!
Please don't ask me directly for help. I don't own this phone.
A quick look at root
• With root you can freeze preinstalled bloatware and backup application settings and game save data.
• 3D content from /system can be played on other devices and 3DTVs.
Unresponsive apps can be frozen which will help the device run smoother and have a longer battery life.
Applications which are frozen disappear from your drawer making the device look cleaner and keeping your mind at ease.
• The process is similar to the one used for SH-01D.
• If an update patch is released or the Android 4.0 summer update is released then this guide will no longer be of help.
(Make sure your device is the following: Android Ver. 2.3.5 Build No. 01.00.03)
• If your device becomes a paperweight I won’t be held responsible.
• Follow this guide at your own risk.
↑
Preparations – Before you begin
• Install Android SDK and SHARP ADB USB drivers and make to use ADB.
• 「Settings」→「Applications」→「Development」→「USB Debugging」 checked.
• SH-06D and micro USB cable to connect to your PC
↑
Required Files
• Download "shdisphook" from the following link and extract.
http://goo.gl/Bs6Iq
• Download shsdgetroot-omap4.zip from the following link and extract.
http://www1.axfc.net/uploader/File/so/78144
• Download shbootgetroot-su.lzh from the following link and extract.
http://www.mediafire.com/?6i0n32jlwbxe8cp
• Keep all extracted files in the same folder.
↑
Creating files
• Create a file named "shdisphook.bat" in the folder with the extracted files.
Copy and paste the following and save.
adb push onload.sh /data/local/
adb push libsdservice_jni.so /data/local/
adb push shdisphook /data/local/
adb shell chmod 755 /data/local/onload.sh
adb shell chmod 755 /data/local/shdisphook
adb reboot
adb wait-for-device shell /data/local/shdisphook
pause
• Create a file named "oncmd.sh" and put the following in the description.
(Save the line break as LF)
chmod 777 /cache
chmod 666 /cache/recovery
• Replace the contents of the file "installfile.cmd" with the following and save.
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/mount -o rw,remount -t rootfs rootfs /"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 777 /sbin"
adb push su /sbin
adb push busybox /sbin
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chown 0.0 /sbin/su"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chown 0.0 /sbin/busybox"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 6755 /sbin/su"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 755 /sbin/busybox"
adb shell /data/local/shsdgetroot-omap4 -c "/sbin/busybox --install -s /sbin"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/chmod 755 /sbin"
adb shell /data/local/shsdgetroot-omap4 -c "/system/bin/mount -o ro,remount -t rootfs rootfs /"
adb push Superuser.apk /data/local/
adb shell /system/bin/pm install -t -f -r /data/local/Superuser.apk
adb shell /system/bin/rm /data/local/Superuser.apk
exit /b
↑
Step 1
• Open command prompt to the folder with the extracted files and navigate to "shdisphook".
Execute "shdisphook.bat". (You can also just double click on the .bat file)
• The device will reboot so just wait for the [Press any key to continue] message to appear.
If more than a few minutes have passed and nothing has appeared then, force close and execute "shdisphook.bat" again.
(When you fail your PC will reboot or your SH-06D WiFi will start. There is a high rate of success when you immediately unlock the lock screen for your device when it goes to sleep.)
↑
Step 2
• Open command prompt and send oncmd.sh to SH-06D to change permissions
adb push oncmd.sh /data/local/oncmd.sh
adb shell chmod 755 /data/local/oncmd.sh
• 「Settings」→「microSD and device storage」→「Unmount microSD」 This will execute the file "oncmd.sh" , which was sent to the device earlier.
(Cancel the message for 「Unmount microSD」)
• Enter the following commands.
adb shell mv /cache/recovery /cache/recovery_
adb shell ln -s /dev/shsd /cache/recovery
• Execute the following adb shell ls -l /cache and if you see the following message you have succeed.
drwxrwx--- root root 2011-11-11 03:39 lost+found
drw-rw-rw- system cache 2012-01-24 10:48 recovery_
lrwxrwxrwx shell shell 2012-03-02 13:24 recovery -> /dev/shsd
• Next execute adb shell ls -l /dev/shsd you should get the following message if you were successful.
crw-rw-rw- system cache 231, 0 2012-04-23 02:01 shsd
↑
Step 3
• Execute adb push shsdgetroot-omap4 /data/local
• Execute adb shell /system/bin/chmod 755 /data/local/shsdgetroot-omap4
• Execute adb shell /data/local/shsdgetroot-omap4 -v -m -u
• The “# “mark will appear there will be no response. Close command prompt for now.
• Execute installfile.cmd
• Check if you have root with the following adb shell→su
↑
After you reboot
• After you reboot you will lose root rights so execute shdisphook.bat→Cancel Unmount microSD →execute installfile.cmd and you should have root again.
The reason why you cannot do a clean wipe or nothing happen is because the recovery section has been move out into another location, causing it to not loading the recovery correctly.
Check with SH-01d part, I have asked similar question there and I revert the recovery in order to wipe the phone..
You need to rearrange the following section like on the sh-01d when you hit this part:
(Following is Original command that you relocated the recovery for root)
adb shell mv /cache/recovery /cache/recovery_
adb shell ln -s /dev/shsd /cache/recovery
And replace with the revert command found on sh-01d thread. You will need to redo all the steps from step 1 to step 2 and STOP AFTER YOU REVERT the RECOVERY.
You should be able to do a full wipe with no issue then. DO NOT POWER DOWN or RESET!!! You will have to REDO it again as it REQUIRES SHDSIHOOK to input shell command.
Hope it helps
waiting！！！！！！！！！！
For all Dev's,
After days of searching for a way to deodex my stock XMP stock ics to flash the nice MOD's
didn't find any way easyer and better than this one aimd to galaxy samsungs
so i've download the attached file and checked it and found nothing says its for galaxy only so i ask the great Dev's here to take alook at it and find or even
test it so if it worked for us would be an easy pr to do this long lines and commands for us new users
and in the tut its like this
"For ICS Roms, the process is quite easy. (Thanks and Credits to jaydvn.)
Download the attached zip file.
Extract it on your windows PC.
Copy your /system/app to _app folder
Copy your /system/framework to _framework folder.
Run AutoDEOToolMain.bat
Follow the instructions.
deodexed jars and apks will be found in deodexed_APK and deodexed_JAR.
Push deodexed app and framework to device:
Connect your device to PC in USB debugging mode.
Copy deodexed_APK and deodexed_JAR folders to root of sdcard (/sdcard).
Open Windows command prompt and type the below commands.
Code:
adb shell
su
stop
mount -o remount,rw /dev/block/mmcblk0p9 /system
rm /system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/deodexed_APK/* /system/app/
busybox cp /sdcard/deodexed_JAR/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/mmcblk0p9 /system
sync
reboot recovery
In Recovery, Wipe Cache and Wipe Data/Factory reset.
Reboot.
Done. "
endof"ing.
caution
: the above tut, is for some galaxy it might not work on our devices
and took from the fowloing linked thread by: superatmos thanks for Him
http://forum.xda-developers.com/showthread.php?t=1587482
again our dev's PLZ make it work for us
and I'm willing to try it my self on my phone
just waiting for the green light
big thanks in advance for all of you.
and the credit goes to the creater of this great MOD.
Forgive my lame inglish and be easy on me this is my 1st real thread.
and if the post doesn't look good that is because I'm blind and using a screen reader and can't realy look at it..
chears.
dark4m said:
and I'm willing to try it my self on my phone
Click to expand...
Click to collapse
Great, let us know how you get on. deodex stock rom
dark4m said:
For all Dev's,
After days of searching for a way to deodex my stock XMP stock ics to flash the nice MOD's
didn't find any way easyer and better than this one aimd to galaxy samsungs
so i've download the attached file and checked it and found nothing says its for galaxy only so i ask the great Dev's here to take alook at it and find or even
test it so if it worked for us would be an easy pr to do this long lines and commands for us new users
and in the tut its like this
"For ICS Roms, the process is quite easy. (Thanks and Credits to jaydvn.)
Download the attached zip file.
Extract it on your windows PC.
Copy your /system/app to _app folder
Copy your /system/framework to _framework folder.
Run AutoDEOToolMain.bat
Follow the instructions.
deodexed jars and apks will be found in deodexed_APK and deodexed_JAR.
Push deodexed app and framework to device:
Connect your device to PC in USB debugging mode.
Copy deodexed_APK and deodexed_JAR folders to root of sdcard (/sdcard).
Open Windows command prompt and type the below commands.
Code:
adb shell
su
stop
mount -o remount,rw /dev/block/mmcblk0p9 /system
rm /system/app/*.odex
rm /system/framework/*.odex
busybox cp /sdcard/deodexed_APK/* /system/app/
busybox cp /sdcard/deodexed_JAR/* /system/framework/
chmod 644 /system/app/*
chmod 644 /system/framework/*
mount -o remount,ro /dev/block/mmcblk0p9 /system
sync
reboot recovery
In Recovery, Wipe Cache and Wipe Data/Factory reset.
Reboot.
Done. "
endof"ing.
caution
: the above tut, is for some galaxy it might not work on our devices
and took from the fowloing linked thread by: superatmos thanks for Him
http://forum.xda-developers.com/showthread.php?t=1587482
again our dev's PLZ make it work for us
and I'm willing to try it my self on my phone
just waiting for the green light
big thanks in advance for all of you.
and the credit goes to the creater of this great MOD.
Forgive my lame inglish and be easy on me this is my 1st real thread.
and if the post doesn't look good that is because I'm blind and using a screen reader and can't realy look at it..
chears.
Click to expand...
Click to collapse
This is actually not that bad looking a post. Well done!
Wouldn't you still need to delete the odex files from your rom?
Sent from my SK17i using xda premium
1st,
Thanks alot for replying
& yes I'll see how to delete them odex files in other tut or thread or if did'nt find it will ask how to
but the way the galaxy devs did it looks good and easy to use for me
since it needs sited help and i like to do such things my self if possible.
Hi Y6 users. This is for Y6 only.
This tutorial will show you how to change the boot splash logo of Huawei Y6.
Risk of bricking is unknown so assume high, this will modify your oeminfo partition.
Tested on:
SCL-L01
SCL-L02
SCC-U21
Download the zip i provided. Includes 15 images.
Here is how to change your splash logo via terminal. (You may install Termux or other app if you don't have terminal)
Code:
su
mount -o rw,remount /system
mkdir /sdcard/oem
(Now paste the zip i provided into /sdcard oem)
[Sdcard is actually internal storage if you didn't know]
cd sdcard/oem
unzip oemlogo.zip
cp ./oemlogo /system/bin/
chmod 755 /system/bin/oemlogo
oemlogo
oemlogo -d
oemlogo -e
oemlogo -c 1.bmp
oemlogo -e
oemlogo -p
reboot
(That's it! 1.bmp stands for the first splash logo and i have included 10 splash images, if you want to use another image then type the number of that image .bmp)
How to change it via adb:
Connect your phone to the pc, and in Minimal Adb&Fastboot console, or whatever you are using type:
Code:
adb root
adb remount
adb shell mkdir /sdcard/oem
adb push oemlogo.zip /sdcard/oem/ (For this to work you need to have Oemlogo.zip in the folder you installed Minimal Adb&Fastboot)
adb shell
cd sdcard/oem
unzip oemlogo.zip
cp ./oemlogo /system/bin/
chmod 755 /system/bin/oemlogo
oemlogo
oemlogo -d
oemlogo -e
oemlogo -c 1.bmp
oemlogo -e
oemlogo -p
reboot
(That's it! 1.bmp stands for the first splash logo and i have included 10 splash images, if you want to use another image then type the number of that image .bmp)
All credits to @DestructoSphere who made the script and made this possible
Also thanks to @EzeMaxtor for the Huawei splash images.
DOWNLOAD: https://mega.nz/#!mZwghRoA!2l-4QkDwrmvCoqrNITDreIXnKUgbcW-YliYPJLJN29s (LATEST v4)
Older releases:
Release 3[v3]: https://mega.nz/#!HZBnjbSb!hw0Xw1LaEqT8o9w00u9jx2bpYQHiTQAYVKLsv0hpoMQ
Release 2[v2]: https://mega.nz/#!LMp0GZqB!0l1k7rtdojNoApMJMqvGQc01QGHQibNBroHQY3xOxW0
First release [v1]( 8 images are broken): https://mega.nz/#!vNhmXaAL!xfLMGUIeH-Sr2QFGsGMjCJ3_1WQqYvc5EwrjojlVHfQ
Images included:
https://imgur.com/a/8Jmw7tw - 1.bmp
https://imgur.com/a/aO2ZGrq - 2.bmp
https://imgur.com/a/RrHUA1q - 3.bmp
https://imgur.com/a/vmzE9C7 - 4.bmp
https://imgur.com/a/mPELj2h - 5.bmp
https://imgur.com/a/fD1bQGB - 6.bmp
https://imgur.com/a/9bqJkDD - 7.bmp
https://imgur.com/a/hVQ3hxm - 8.bmp
https://imgur.com/a/zlIXNCe - 9.bmp
https://imgur.com/a/19TYaaT - 10.bmp
https://imgur.com/a/bhs1Cxe - 11.bmp
https://imgur.com/a/nvy3Jon - 12.bmp
https://imgur.com/a/MXlW17c - 13.bmp
https://imgur.com/a/GhsD8se - 14.bmp
https://imgur.com/a/j8KBiaA - 15.bmp
https://imgur.com/a/RANJwWH - 16.bmp
https://imgur.com/a/6c1YdIt - 17.bmp
https://imgur.com/a/XhWUnm6 - 18.bmp
https://imgur.com/a/LIb7un8 - 19.bmp
https://imgur.com/a/odfET0v - 20.bmp
If you want other images than these you may PM me on Xda/Telegram (@Thespartann) so i can convert the image so it works as an splash logo.
Also an tutorial is coming soon so you can convert it yourself.
!These images are not made by me, i only made them work as the splash logo!
If i helped press the thanks button
works like charm ! . for anyone who faced any issues with running adb Root . use adbd Insecure
great, finally after 3 years i delete tim static logo from my Y6
works under termux really fine.
my favourite image was n3.thanks a lot.
Thank god! Finally I also removed the terrible oem splash screen, I have ATU-L11 version of Y6.
I also used 3.bmp, through adb.
Multumesc mult!
EDIT: too fast... after a couple of restarts the old logo came back What does Huawei have that's so hard to modify?!
:good: