Received my XPS white last week. Love it so far - the overall useability, design, camera, and its screen.
But there is one thing that fall short, in my view sub par, and that is the choice of material used for the phone body. It is plasticky especially the back cover, and easily stained (for the white one).
The reason I post this is to share with you that the anti stain coating of the XPS white is far from perfect.
My 3-day old XPS white had been stained/ dyed to light blue due to a handphone pouch I used; the same pouch I used for my past 3 phones. I learnt from the web that the anti stain coating allow you to remove the stain by rubbing the surface using your finger or eraser. As my situation was really bad, I used an eraser and rubbed it for a full hour. The stain eventually rubbed off, but so do the whole top coating... now instead of matte white, my phone now look flat and a little shiny, like those plastic material you find in kid's toy.
Conclusion:
1) dont rely on the anti stain coating, while it does work somewhat, it will wear off.
2) be careful with the case, or pouch (or maybe even your jeans!) you use for your phone, they might stain your XPS white.
Related
Hello,
Have any one noticed that the Droid RAZR surrounding plastic border, at the back, color gets dim from putting it on your desk or table. It's not very obvious, you wont see it except in strong light, but it's obvious enough to bother me every time I look at my RAZR
I have attached a pic I found online which has the same problem as mine and I highlighted the scratched or the dim parts on the plastic border.
Is there a fix for these scratches?
What were you thinking in, Motorola. Why didn't you choose a stronger material around the phone, I mean you did a great job by choosing gorilla glass to protect the display and Kelvar fabrics on the back, and the coating which protects the internal body parts. Yet you made the material which gets the most damages and is highly vulnerable out of plastic...
If you ever owned an iPod with a stainless steel back you'd know that being plastic or metal won't change the eventual appearance of fine scratches. Glass stays shiny and doesn't scratch as easily, but we all saw the crap people gave Apple for making the back of their phone out of that.
I doubt that the scratches can be removed even if they could be you're just going to get them back by putting the phone on your desk again. If you have to go out of your way to look for it under a strong light, it sounds like you either need a case, a hobby, or both.
There actually is a method for removing scratches:
1. Fine grain abrasive paper
2. Abrasive paste
But that will eliminate the paint on your backplate and you should re-paint it with an acrylic paint (like spray paint).
If you're so brave to do that...well..do it...but consider the idea of taking your RAZR as it is and to not put it directly on your desk but like me, put it on its pouch.
The fact that it's going to be scratched is absolutely normal... it's a phone..!
The coolest thing you can do would be to take out the back plate and sent it to a powdercoater. That's what I would do but I think it will mess up the warranty. it would be so cool though.
Isn't it an excess to powdercoat it?
Hey probably in 1 year you won't have it anymore xD
....But I have to admit it would be cool.
Can't polish and compound fix it?
The ones I use for my car =D
mzaza said:
Hello,
Have any one noticed that the Droid RAZR surrounding plastic border, at the back, color gets dim from putting it on your desk or table. It's not very obvious, you wont see it except in strong light, but it's obvious enough to bother me every time I look at my RAZR
I have attached a pic I found online which has the same problem as mine and I highlighted the scratched or the dim parts on the plastic border.
Is there a fix for these scratches?
What were you thinking in, Motorola. Why didn't you choose a stronger material around the phone, I mean you did a great job by choosing gorilla glass to protect the display and Kelvar fabrics on the back, and the coating which protects the internal body parts. Yet you made the material which gets the most damages and is highly vulnerable out of plastic...
Click to expand...
Click to collapse
I have the same problem with my first Droid Razr. Then returned it to Verizon Wireless because I got the deal from Amazon.
And on second one, I put more care over that plastic bezel and put carefully a slice of transparent tape to cover it.
Though running at the risk of scratching the plastic bezel, I still let it run nakedly because it is the thinnest phone in the world and any cover will blow that title.
Mine scratched in the same places. I used car polish (Meguires Scratch X) to remove them. Just be gentle. I keep mine in my Casemate case now to prevent more.
That! One of the reason I moved from sgs2 because the plasticky body also collect the scratch at the same area (top and bottom). But it turned out razr metal body also can collect scratch... Geezz, i always put in my left pocket together with handkerchief, never ever put any coins or metallic substances near my phone....
And now, while i look closer to my screen, it too has collect two fine scratch line. Small, but i can see it. I think gorilla glass is way overhyped... As i wander around i also found this:
http://forum.xda-developers.com/showthread.php?t=1358493
p.s: can we sue corning? or those guys who hammered their gorilla-glassed phone on you tube with knife?
The title of your thread implies that you already have a fix. You should have it edited.
Otherwise just buy a dang cover/case for the phone or buy little soft towels for every spot you put it down...
I bought this case for its really unique look. The picture I saw was for the black note but I knew it would look really awesome on my white note. The case is very thin hard plastic (not flexible at all even though the website states it is) with design of rain drops imbedded into the plastic, the water drops are actually raised up making the back have a strange texture and causing it to be super slippery. I was afraid to keep it on too long as I feared dropping it. It does not provide very much protection at all its more for show and scratch protection for the back, the gradient color from blue to clear makes it very nice looking. I found this one ebay but ended up buying from obostore for $7.99 with free shipping. It was shipped very fast too. I have provided pictures and link to store I bought it from. I would use it for scratch resistance only, I ended up not using it because of the above issues but it did look great! I still use my TPU case for better protection for the sides and screen of the device. There is no lip to protect the screen on this case and top and bottom sides are open. Buy it for the looks not the protection. I bought the blue one but it also available in black, yellow, pink and white. Also note that it comes with a screen protector but it is for the international version with the home button.
http://www.obostore.com/imak-colorf...ase-for-samsung-galaxy-note-p-3805-c-299.html
Amanda (Pimms)
Usually I turn to Spigen for glass screen protectors. Unfortunately, they didn't create any products for this device. So I turned to eBay and found the Nillkin available for $16 shipped.
Glass screen protectors have pros and cons. It acts like a second skin. You can barely see the protector on the screen. It does add a little thickness and can interfere with certain cases. It will protect your screen, but it can break as well. Better for it to absorb some of the impact than your screen. It can scratch as well. Finding these locally is difficult.
The ZAGG invisibleSHIELD will protect your screen, but it is known for the orange peel effect (sometimes looks like the surface of an orange). Others note rainbowing can occur (you see red green and blue if you look closely depending on the type of invisibleSHIELD). It is highly resistant to scratching and cutting. The material kind of has a memory to it. With the Note 3, it held the marks from the stylus for a LONG time. Readily available at Best Buy and other outlets.
Plastic screen protectors are usually pretty clear. They will protect your screen, but sometimes I have a hard time making sure all of the bubbles get out when applying. I guess all are not created equally because the one I purchased from the Verizon store actually worked pretty well. You'll see me removing it in the video. There was a little bit of a color distortion if you looked at it from the right angles. Appeared that the adhesive material was causing it. Available almost everywhere.
With a beautiful 5.9" screen, I do encourage you to try a glass screen protector. If you're going naked. You are much more brave than me. I tried this once with a Note 3 and the scratches eventually came. Gorilla glass is resistant to scratches,but is no match to a little time in a pocket with keys, change, etc.
chrisngrod said:
Usually I turn to Spigen for glass screen protectors. Unfortunately, they didn't create any products for this device. So I turned to eBay and found the Nillkin available for $16 shipped.
Glass screen protectors have pros and cons. It acts like a second skin. You can barely see the protector on the screen. It does add a little thickness and can interfere with certain cases. It will protect your screen, but it can break as well. Better for it to absorb some of the impact than your screen. It can scratch as well. Finding these locally is difficult.
The ZAGG invisibleSHIELD will protect your screen, but it is known for the orange peel effect (sometimes looks like the surface of an orange). Others note rainbowing can occur (you see red green and blue if you look closely depending on the type of invisibleSHIELD). It is highly resistant to scratching and cutting. The material kind of has a memory to it. With the Note 3, it held the marks from the stylus for a LONG time. Readily available at Best Buy and other outlets.
Plastic screen protectors are usually pretty clear. They will protect your screen, but sometimes I have a hard time making sure all of the bubbles get out when applying. I guess all are not created equally because the one I purchased from the Verizon store actually worked pretty well. You'll see me removing it in the video. There was a little bit of a color distortion if you looked at it from the right angles. Appeared that the adhesive material was causing it. Available almost everywhere.
With a beautiful 5.9" screen, I do encourage you to try a glass screen protector. If you're going naked. You are much more brave than me. I tried this once with a Note 3 and the scratches eventually came. Gorilla glass is resistant to scratches,but is no match to a little time in a pocket with keys, change, etc.
Click to expand...
Click to collapse
Had this one for a couple of weeks now and it is fantastic! Clear as a bell, smoother than the original glass, and hides, fingerprints, smudges, and makes the screen even more vivid than stock!! Get one of these, you will thank me later!!
I was just curious that how many of you use your phone without any protection? I just started using like that and it feels really nice. The hyper-cut diamond finish gives a good grip to the hand.
I really like the feel of the phone in the hand, nicest I've had to hold, and is the only phone I ever use a case with...I just know if I leave it out the case there will be an expensive accident.
I use it without cover but with a glass screen protector
I don't use any glass or cover. I buy nice designed phones to feel the nice full metal unibody with a slim design.
If i would like to feel any cheap, fat plastic body i can buy a phone with a cheap plastic body.
I use xtremeskins UK sticker on top of back of my phone and plastic film screen protector as the one preinstalled has worn out. I have black carbon fibre version of the sticker with red accent on camera lens (which actually matches power button colour ) it looks cool and gives that extra grip.
Here is a link to website:
https://www.xtremeskins.co.uk/products/huawei-p10-skins?variant=36513341329
You can see for yourself how will your phone look like before you buy the actuall skin. The quality of a skin is amazing ,it's hardly add any bulk to the device and it does make it feel better in hand as well as add that extra wow factor when you pull out your phone from pocket.
I received my P10 on Thurs 07/12 and wanted to get a few opinions on whether i should remove the factory fitted screen protector prior to applying a glass screen protector or if i should just clean the factory fitted protector with the alcohol pads/swabs provided and stick the new glass screen protector on top?
Does the factory fitted protector reduce the clarity/sharpness of the screen in any way?
Would this be adequate:
https://www.amazon.co.uk/SUFUS-Prot...-4&keywords=huawei+p10+screen+protector+glass
Kind Regards
I'm using the original Huawei Flip cover and a full glass screen protector. As an electrician my hands aren't clean Everytime I grab my phone and sometimes I need to put some tools in the same pocket as the P10 is in.
But I hate the glass protector even it works very well. There's a black border around the whole protector and after a few month the protector doesn't fit perfectly anymore, it moved a bit to the left. The transparent part of the protector is a bit smaller than the screen and this is kind of annoying especially know it's moved.
I don't want to use a protector, but I think I need one. I don't want an ugly scratch on the screen.
Hi,
I removed the factory installed film in the screen and replaced it with a matte IQ Shield protector. It's great. It's not glass, but it has no reflections. Like most laptops.
Anyone suffered any of the paint coming off their s9? Despite being in a Spigen Rugged Armour case abs and not dropped a tiny bit of the black paint has come off the left hand bottom corner
No issue on my device...still looks brand new
I have a similar thing happening to me my phone has always been in a case and the paint is coming off from the fingerprint sensor, I took it to ubreakifixit and they said is not covered under warranty
https://www.the***********.com/samsung-galaxy-s9-fingerprint-scanner-chipping-off/
Same thing same phone. But it works.
Actually you have to clean the case time to time,As dust gets stuck which can scratch the paint easily
Mine has a little chipped paint around the band very small but it shows silver. Not a big deal just irritating could take back since only had five days but not worth the hassle.