So, quick backstory. I have two PC's at home. A brand new win 7 64 bit laptop, and an older XP desktop. Neither will recognize my vibrant, and never have. At work, I have a win XP desktop, and I can connect the phone to that and use mass USB storage and move stuff around just fine, so I've gotten by in that regard in these 6 long months.
Then comes this #$%%^$#$ Froyo update. Who thought it would be easy?
I have downloaded kies on each machine. (As well as ODIN, but same issues.....computer/phone wont communicate). I cannot get my two home computers to connect to the phone, no matter what settings. BTW, I have rooted my phone with OCLF and subsequently un-rooted before trying any of the following. I have not flashed or updated the phone otherwise with any other software, other than what apps are available in the market.
I've tried
-USB Debugging on/off
-all 10 USB ports between the three PC's in all configurations
-deleted all USB drivers and restarted on both computers
-installed the appropriate drivers from samsung for each pc
-wasted 7 hours with samsung support troubleshooting to no avail
The USB cable is fine. The most promising progress is on my work PC, where I got Mini Kies going, connected and started the update, it finished decompressing the binary files, but then a USB not recognized warning pop up and kies kicked out the update.
I have installed, reinstalled the drivers for each system several times with samsung support. Nothing is working.
I don't know what else to do. This is the most frustrating experience in my life. Any suggestions or similar experiences that have been remedied?
I was having promblems also but eventually got it to work for me on an xp machine on stock jfd. It updated me to ji6 then I did the ka6 update when it was released. I gave up on my win7 system lol. Is your xp system 32bit or 64?
Sent from my SGH-T959 using XDA App
same here i have a win7 64 bit machine, i can connect to normal kies 1.51. i tried to update, it downloaded the files and just got stuck when it started putting it on the phone (luckily, it did not start the installation so i was okay).
mini kies shows that it recognizes my phone but crashes immediately after that.
i do not think the vibrant is supported by newer versions of kies, like 2.0.
I solved my problem by using my 32bit xp system.
edit: just FYI, i can connect to normal kies 1.51, sync my data and all that stuff. i also updated to ji6 thru normal kies, and I can transfer files and whatnot thru usb. I do not even think i needed to install the drivers manually
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
http://71.228.63.153/download/usb_drivers_GalaxyS_x64.zip
Click to expand...
Click to collapse
I did the Same thing it worked for me as well
The only luck I've had is on a winXP 32 bit machine, but then it cuts off the installation when it suddenly says "USB Not Recognized" (despite, um, the fact that it recognized it at the beginning, otherwise I wouldn't have been able to initiate the update!)
I'll give those Win7 64 drivers a try at home, although I'm pretty sure I have downloaded the same ones in my quest for a solution.
Do you suggest plugging in the phone, then installing the drivers, or leaving the phone unconnected and restarting the computer then trying to connect, or ???? The biggest issue on the Win7 machine is the phone not communicating with it AT ALL. Not even showing up in device manager as unknown or anything.
Moved of: Samsung Vibrant > Vibrant General
To: Samsung Vibrant > Vibrant Q&A
Please put your questions to: Vibrant Q&A
SOLVED
I finally got it to work, after about 15 attempts! (on a win XP machine)
Here's what I did in case it will help someone else:
When I plugged in my phone, I saw two items in the USB list in device manager. One said "Samsung Android USB Composite Device" (internal SD?), and the other said "USB Mass Storage Device" (external SD?). In this configuration, I got kicked out of the install each time after it "decompressed the binary files".
So what I did on a hunch was go to the device manager and "update" the driver for the USB Mass storage device to the "ssadadb2.inf" file included in the Vibrant USB drivers available directly from Samsung's Vibrant page.
Selected "Samsung Kies" on the USB settings on the phone, turned on USB Debugging, opened Kies on the computer, plugged in the phone, and it did it's thing.
Only took 3 days to figure it out!
Yeah its been a hit or miss. I have win7 x64 on two laptops and my desktop. It works in the desktop and only one of the laptop and I installed the same drivers for all 3
Sent from my SGH-T959 using XDA App
toeshot said:
I downloaded Mini Kies 2.0 onto my windows 7 64bit machine and installed the Samsung drivers I have everything worked smoothly. I upgraded 3 phones to Froyo with no issues. here are the drivers I have
yeah it works for me too, i just installed these drivers and put usb debugging mode. upgrading just now. thanx
Click to expand...
Click to collapse
W/ WIN 7 64 Bit I upgraded my phone to Froyo.
I'm running win 7 SP1 64 bit.
Samsung told me that Kies mini and the driver is not compatible to 64 bit.
After some research this is what I have done and able to upgrad my phone to Froyo.
1. check the USB debugging.
- Samsung says to uncheck it. but if you do, you probably have MTP USB device error. So make sure your USB debugging is on.
2. After the you connect your phone, Samsung Kies Mini keeps crashing??
-Uninstall IE 9.
Solution is...
*Check the USB Debugging and Uninstall IE 9.
**Make your the battery is fully charged.
Connect phone
Start Kies Mini
I got so sick of Windows I switched to Ubuntu Linux. It's free and just as easy to use as windows. No crashes, no viruses, and it sets up as a dual boot so I can use windows when necessary.
So I've installed Kies 2.0 on my desktop running Win7 64bit and ran it fine, but I'm currently traveling and I only have a netbook running Win7 32bit Starter edition, and Kies REFUSES to install. Every time, it comes up with 'Error 1618: another installation is in progress.' Which is absolutely untrue, since I've tried installing it immediately following a restart, and other programs have installed fine since then. I've tried giving it admin permissions, enabling compatibility modes for WinXP or Vista, and nothing works. I've tried stopping and restarting the Windows Installer Service as well. Has anyone experienced this problem?
The only reason I need Kies is for the SGS2 drivers, so I can flash with Odin. If there's another way for me to get those drivers on my computer, that would be great too
Search for Samsung USB drivers .
jje
basically I can't seem too root my gs2, coming from a nexus one i thought it'd be easy
Looks like a driver problem, kies is installed (and not running) but odin connects to a port and then when start is clicked it doesn't progress any further. I presume its a driver problem so was wondering if anyone could link me a set of drivers that are known to work.
might be worth a mention that kies doesn't connect to my phone either,
I found some, but they wouldn't install over what I had, and then when i uninstalled everything and started fresh, they installed and then windows updated over them.
Any help would be greatfull!
Hi all. So I just picked up a Verizon Note 2 today and happily looked forward to rooting it. I'm on 4.1.2 Jellybean VRAMC3, model number SCH-I605. I'm afraid I may have messed something up.
I had downloaded Odin and installed the Samsung USB drivers and all that good stuff. Odin picked up the phone and all that, but a bit more looking around seemed to indicate that the usual Odin method of rooting wouldn't work on the latest version that I had.
So I downloaded the CASUAL installer and got that to run. It ran through the install, rebooted the phone, and then said it was waiting for Windows to recognize the device again so that it could continue with the install.
At that point, Windows informed me that a driver install had failed and the CASUAL install did not proceed any further, despite waiting a good 5-10 minutes.
Since doing this, the phone has had bizarre USB connection issues. Odin and Kies do not read the phone at all. Plugging the phone in brings up an additional drive for about two minutes with a Verizon Assistant Manager EXE, a USB Drivers EXE, and a couple other things, then it disappears.
The phone will often display a message informing me "Unable to find software on your PC that can recognize your device." This happens regardless of being in USB Debugging mode or not.
I've tried uninstalling and reinstalling several versions of Samsung's drivers as well as Kies. I also tried a factory reset on the phone itself, but these connectivity issues (and accompanying warning messages) persist.
Not sure how to proceed from here and would love a bit of help. Thanks!
Additional notes: All normal functions of the phone are working fine, and the computer DOES detect the phone as a "Samsung Android Device", but as stated Odin and Kies are not able to detect/connect with it.
Update: Messed with drivers a bit more and Odin will now pick up the phone again. When the phone disappears as a "drive" with install helper stuff, it reappears as a portable device, and I can browse the innards of the phone to put music and other stuff on it. CASUAL however still does not pick up the phone.
Hi,
I have litterally looked everywhere before asking and none seem to awnser my issue that I'm having.
I have in the past managed to get my phone to connect on a Win 8.1 Machine, and I managed to root it. I also noticed today that my IMEI is Null/Void. However, when I've come to repair the efs my Phone will not connect anymore. No Drivers are actually installing, when I first plug the phone in I get no automatic driver install from Windows. I have installed the Samsung Mobile Driver V1.5.14.0, and also Kies Version 2. None of this seems to make a difference, I have tried pulling the battery, changed different cables and USB ports but doesn't matter if I reset or anything it won't pick the phone up all it will do is charge the phone.
I checked on USBDeView for the Drivers and even though I have run the Driver install's they do not appear to be installed on the list of drivers I have installed either under "Android,Google or Samsung".
Any help would be fantastic, and then after that I need to fix the Not Registered on Network Error! But one thing at a time!