Introduction:
This is a thread to organize information on the CM7.2 port made by hPa.
It also includes files that are directly relevent to the CM7.2 port.
Requirements:
A custom recovery installed
Stock 407 firmware installed
Installation:
Download: update CM7.2 RC0 zip
update-cm-7.2.0-RC0-DS-KANG-HPA-signed.zip
update-cm-7.2.0-RC0-DS-KANG-HPA-HDPI-signed.zip
Copy to sdcard
Reboot to recovery
Flash
Factory reset - inside custom recovery
Fix permissions(?) - inside custom recovery
Reboot
Factory reset - main menu [BOTH ARE REQUIRED!]
Reboot
Finished
Optional: Flash optional mods in next post
Credits:
hPa for porting CM7.2 RC0
DJ_Steve for providing hosting
FAQ:
I cant boot CM7.2 after installing / I get boot loops after installing / Why do I need to do two different factory resets?
Each factory reset clears different sets of data, the stock one only clears what's normally needed to be cleared.
An analogy would be that: stock clears: ABCD, recovery clears: CDEF.
My battery life is bad / My wifi does not automatically turn off at sleep
The rom currently has a bug in that it ignores the current wifi sleep setting and always leaves it on, a workaround is to manually turn it on and off via the notification bar
Does the rom really support overclocking to 2.5 GHZ?
No, it was mistakenly added, it only really supports OCing up to 1.190 GHZ, anything higher does nothing.
There is a patch in the files section to set it back to the stock defaults
Google Market is missing
You must also flash the GApps package, it is not included by default in CM roms
What is the difference between the normal (MDPI) and HDPI zips?
Each rom only includes assets (icons/bitmaps/etc) for their respective DPIs, you should pick MDPI if you prefer 160 DPI and HDPI if you prefer 240 DPI
What does the RC0 in the title stand for?
Cyanogen 7.2 itself is not released yet, this rom is based off 7.2-RC0 (ie when it was still in beta), the latest build is RC1
Does this mean there will eventually be a CM9/ICS port?
No, as this rom uses the stock 407 drivers. The drivers would need to be ported to ICS before you can have a working ICS rom.
Are there any themes for this rom?
Not directly, but there are hundreds of compatable themes for CM7/Tmobile theme engine enabled roms.
Any theme made for CM7 should work on CM7.2
How do I install the apks in the Optional Mods section?
If they are update.zips: Flash them though a custom recovery
If they are apks: Sideload them though your preferred method (Browser, Root explorer, adb, etc)
Optional Mods:
Gapps Support
Gapps frameworks: (See [GApps]Gapps package for GB/ICS)
Adds gapps core frameworks back in to rom
CarHome.apk: CarHome.apk 2.2.1.5
Car mode launcher
GenieWidget.apk: GenieWidget.apk 1.3.04
News and weather app
Talk2.apk: update-talk2-GRJ90.zip (from Android 2.3.5/GRJ90)
Talk with Voice/Video chat
CPU 'Fix': [LINK TBA]
Sets CPU governer and clocks back to stock default
Dell Stage 1.6 fix: [LINK TBA]
Fixes to make Dell Stage 1.6 work on rom
DSC Phoenix kernel: Link
Will be directly integrated into CM7 in a future release
USSD Fix: update USSDfix 2.zip
Allows you to use USSD codes from the dialer
hPa said:
수정 사항입니다.
1. 기본 오버클럭 테이블 2.4GHz
2. 사진 촬영 장면 모드 강제 종료 픽스
3. libOmxVdec.so 파일 순정 교체
이전의 프리징 현상의 원인은 거버너 문제로 판별되었습니다. 오버클럭 테이블의 문제가 아니었네요. 흐;;;
내장 카메라 어플에서 사진 촬영 시 장면 모드 설정을 하면 강제 종료가 되던 문제를 수정하였습니다.
libOmxVdec.so 파일을 순정으로 교체하였습니다. 720p 하나 때문에 다른 방식의 동영상을 버리는 건 비효율적이라는 판단 때문입니다.
기존의 160dpi(mdpi) 기준의 설치 파일과 함께 240dpi를 사용하시는 분을 위해 hdpi용으로도 설치 파일을 만들었습니다.
mdpi와 hdpi는 빌드될 때부터 달라지기 때문에 hdpi와 240dpi로 조정한 mdpi는 조금 다릅니다. (설치 파일 용량부터 다릅니다. ㅋ.
240dpi 전용 설치 파일은 dpi를 내릴 수록 이런저런 문제가 생기므로 240 이하로는 내리시면 안 됩니다.
대신에 hdpi 전용 어플이나 테마 등을 제대로 즐길 수 있는 장점이 있습니다. (보급형이 mdpi고 왠만한 폰들은 다 hdpi지요.)
최초 설치 방법입니다.
1. 우선 리커버리 모드에서 백업을 해둡니다.
2. 다음의 파일을 다운 받고 SD카드에 넣습니다.
http://www.mediafire.com/?ldlniz7wm6ha7s1 <- update-cm-7.2.0-RC0-DS-KANG-HPA-signed.zip
http://www.mediafire.com/?yin9oog0au7k2mj <- update-cm-7.2.0-RC0-DS-KANG-HPA-HDPI-signed.zip
http://www.mediafire.com/?vprpvsarlcic7m6 <- gapps-gb-20110828-signed.zip
클럭워크모드 리커버리를 쓰시는 분들은 http://cmw.22aaf3.com/gapps/gapps-gb-20110828-signed.zip 이걸 설치하시면 됩니다.
3. 리커버리로 진입하셔서 update-cm-7.2.0-RC0-DS-KANG-HPA-signed.zip를 먼저 설치하시고
그 다음에 gapps-gb-20110828-signed.zip를 설치합니다.
4. wipe data/factory reset을 꼭 하신 다음 재부팅합니다.
기존 사용자 분들은 통파일 설치 후 Wipe Dalvik Cache 정도만 해주시면 됩니다.
Q. 인터넷에서 플래시 재생이 안 됩니다! (레고 모양으로 보임)
마켓에서 flash를 검색하셔서 Adobe Flash Player 11을 받으시면 됩니다.
Q. 올레마켓이 없습니다!
올레마켓이 필요하신 분은 여기로 가셔서 설치하시면 됩니다. (http://cafe.naver.com/dellboom/12253)
Q. 720p 동영상 재생이 안 됩니다!
720p 동영상 패치를 하시고 Dice Player로 보시면 됩니다, (http://cafe.naver.com/dellboom/8696)
참고로 720p 동영상 패치를 하게 되면 720p 동영상은 잘 돌아가는데 다른 동영상들이 Dice Player에서도 끊기는 현상이 발생합니다.
이는 패치 파일이 720p 동영상에 특화된 파일이라서 그렇지 않나 생각됩니다.
Q. 순정롬(혹은 기타 커스텀롬)보다 동영상이 끊깁니다!
720p 패치를 하신 상태라면 720p 패치 파일이 720p 동영상 외에 다른 형태의 동영상들에 취약하기 때문에 그렇습니다.
따라서 순정 파일로 다시 돌아가셔야 합니다. (http://www.mediafire.com/?pxieuzucpjcdapx)
만약에 720p 패치를 안 하셨는데도 끊기신다면 Dice Player를 사용해보시기 바랍니다.
MX Player 등의 일반적인 동영상 어플들은 주로 하드웨어 가속을 사용할 때 자체 기능이 아닌 내장 동영상 어플을 사용하게 됩니다. 하지만 CM7은 내장된 동영상 어플이 성능이 상당히 떨어집니다. 따라서 끊기는 현상이 발생합니다.
Dice Player는 자체적으로 개발한 플레이어를 사용하므로 잘 돌아가는 것을 확인하실 수 있을 겁니다.
Q. 음악 소리가 작아졌습니다!
음악 소리 같은 것들이 작은 경우, 사용하시는 어플이 문제일 수도 있습니다.
예로 파워앰프의 경우. 기존 상태에서는 상당히 작은데 이게 자체적인 오디오 볼륨 조절 기능 때문에 그렇습니다.
Settings -> Audio Engine -> Advanced Tweaks -> Direct Volume Control의 체크를 해제하시면 크게 들리실 겁니다.
(볼륨 크게 하려고 만들어놓은 설정인데, CM7에서는 외려 작아지네요;;
기본 위젯등으로 소리를 들어보시면 크게 잘 들린다는 걸 알 수 있을 겁니다.
Q. GPS가 잘 안 잡힙니다!
위치 및 보안 -> GPS Source에 Use Internal GPS를 체크한 다음 잡아보시기 바랍니다.
Q. 갑자기 알림창이 먹통이 되었습니다!
알림창에 쌓이는 알림들은 CM7에서 오른쪽이나 왼쪽으로 드래그해 보냄으로써 지울 수가 있습니다.
그런데 이 기능이 가끔 알림창 먹통을 일으키는 현상이 있습니다.
이 때에는 Theme Chooser라는 어플을 열어서 다른 테마를 적용하고 다시 돌려놓으시면 됩니다. (기본으로 있는 어플입니다.)
네코님 감사합니다 +_+!
Q. 배터리가 광탈을 합니다!
프레임 패치 1.0이 적용된 커널을 적용해보시고 그래도 그러시다면 프레임 패치가 안 된 파일을 적용해보시고
그래도 안 된다면 ... ㅠㅠㅠㅠ
프레임 패치 1.0 커널
프레임 패치 제거 커널
(원본 복구용 프레임 패치 2.0 커널 )
Q. 어플이 강제 종료됩니다!
혹시 어플 및 데이터 백업 어플을 사용하여 복구를 하였다면 이런 문제가 발생할 확률이 높습니다.
죄송하지만 어쩔 수 없이 다시 받으셔야 합니다.. ㅠㅠ;;
Q. 와이파이 절전모드에서 배터리가 많이 닳습니다!
이거는 원래 스트릭 순정롬이 이상했던 겁니다. 와이파이 절전모드인데 와이파이가 꺼져서 배터리가 오래간 거지요.
현재 CM7에는 와이파이 슬립데스 패치가 되어 있어 절전모드에서도 와이파이가 꺼지지 않습니다.
따라서 이제 정상적(??)으로 배터리가 닳게 되는 겁니다.
으어.... 이제 베타를 때네요. 헤헤;;;; 기쁩니다 ㅠㅠㅠ;;;
후면 카메라 사진 촬영 뒤 리뷰 사진이 안 뜨는 건 순정에서 특별한 처리를 하기 때문에 그렇습니다.
정확히는 찍은 사진 JPEG로 압축·저장한 다음 다시 불러와서 압축 풀고 화면에 뿌려주기입니다... 이건 무슨!?
어쨌든 이 기능을 살릴려고 해보았으나 이건 뭐 코 앞까지 갔다가 거대한 벽을 만나서 GG쳤습니다... ㅠㅠㅠ;;
영상 통화 문제도 전에 설명드렸던 그대로이고.. 사실상 크게 바뀐 건 없습니다 ' ';;;
최근에 제가 커스텀롬 게시판을 정말 점령하고 있지 않나 싶어서 무섭습니다 ㅠㅠㅠ;
그래서 이전 버전들을 지울지 말지 아직도 고민 중입니다... 음....
좋은 커널과 트윅을 제공해준 DSC Team에 감사드리며 (도둑질이나 마찬가지라서 아직은 찔리는 부분이 많아요.. ㅠㅠ)
테스트 버전1때부터 피드백을 마구마구 올려주신 여러분께 진심으로 감사드립니다 (_ _)
P.S CM9를 가지고 협박을 하시다니 ㅠㅠㅠㅠㅠ 그건 저도 사실 자신 없는 녀석인데 ㅠㅠㅠㅠㅠㅠ
따라서 기대는 하지 마세요 ㅠㅠㅠ; 괜히 사진 올렸나 ㅠㅠㅠㅠ;;; 으어엉어어어어유ㅠㅠ
Click to expand...
Click to collapse
(Original release notes by hPa)
For Official Use Only / Do not write in this space / This space for rent
Thread at XDA: http://forum.xda-developers.com/showthread.php?t=1528412
basic procedure:
* Start with 407 (or any ROM based off of that like GingerStreak) (as long as you already have some 407 based ROM you have the correct baseband)
* copy https://www.cx.com/mycx/share/uKQjp2b5EeG2XRICOARY_Q/CM-7.2.0-RC0-DS-KANG-HPA.zip to SDcard (from here) this version has the google apps installed.
* backup apps data/config (use each app's backup routine, not titanium)
* reboot into streakmod recovery
* wipe dalvik, cache, data (all 3 from the streakmod menu)
* apply the CM7.zip from above
* (apply superuser.zip)
* (apply ussd.zip fix)
* fix permissions (from streakmod)
* reboot and go back into recovery
* factory reset from the Dell recovery menu (not the one in streakmod menu)
* Reboot, wait
* desktop loads, wait more... just let it sit and figure things out for about 15 minutes
* reboot
* enjoy
I was having superuser issues and wound up having to reapply superuser.zip before my root apps would work. http://forum.xda-developers.com/showthread.php?t=997581
Some people are reporting issues of wifi not allowing the streak to sleep properly, but JuiceDefender or GreenPower solves that issue.
https://play.google.com/store/apps/details?id=com.latedroid.juicedefender
https://play.google.com/store/apps/details?id=org.gpo.greenpower
GPS works fast (GPS Status and toolbox, Google Maps)
Camera works (front and rear), but I didn't see a setting that specified "720"
I installed the swype beta as the default kbd sucks https://beta.swype.com/android/welcome/detailed/
also launcherpro, friendcaster, handcent, enhanced email, JuiceDefender, root explorer, tasker (all of which I paid for)
EDIT:
Things that I like with this ROM over others, like Honeystreak, etc:
* Cyanogen provides a whole list of tweaks in settings like: disabling boot animation for faster startup time. Built in CPU control, like setCPU.
* Power control in the notification panel like Samsung ROMs.
* Built in LED lights for notifications, like http://forum.xda-developers.com/showthread.php?t=773742
Things I dislike
* Photos taken do not stay displayed in the main window, so you could see how it came out.
*
EDIT2:
USSD codes working if fix is applied: http://forum.xda-developers.com/showthread.php?t=1558089
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Using JuiceDefender to manage the CPU and Data
Radimus,
Is there any advantage to using Juice Defender to turn off the wifi as opposed to Tasker? I see you use both. I don't think I would take advantage of the other features of Juice Defender (I like my data always connected). I could set up a profile in Tasker to turn off wifi when the screen is off and that should take care of the "bug", right?
There shouldn't be any real issue. The problem has something to do with wifi always searching. Anything that manages the disabling of wifi should do the trick.
There's also the obvious: manually enable and disable wifi from the notification bar.
Wifi still has to reconnect, so sometimes it's equally just as fast to not turn it on at all if you're doing something like checking your email (or anything else equally brief)
When I go into Settings -> Cyanogenmod Settings -> Display -> Automatic backlight, under Light levels I check use custom then click on Edit other levels and CyanogenMod settings (process.com.cyangoenmod.cmparts) crashes. I'll see what I can find as far as a fix goes.
I can reproduce it too, I'll try investiating too, but I wont have free time for a couple days or so
thats strange because my wifi actually turns off a couple of minutes after i turn the screen off
Wby would you call that wifi feature a bug?
WiFi driver specifically patched to set wake lock when it's on.
Wifi not turning off drains a lot of battery on this, it makes up nearly half the drain if it doesnt sleep when the screen is off.
I'm having to resort to only enabling it when it's worth enabling due to the drain.
_n0p_, we could really use some of your magic with a phoenix kernel for this
Shane, is CM7 stable enough for everyday usage? Including calls and using camera sometimes?
_n0p_ said:
Shane, is CM7 stable enough for everyday usage? Including calls and using camera sometimes?
Click to expand...
Click to collapse
It seems to be, I've used it several days here and there. I've had a problem sticking with one ROM for very long since MIUI and CM7 came out...
My biggest problem with it is battery drain, although it obviously drains slower if you keep wifi off. I've been hoping someone (wink) would create a kernel for CM7 to help with battery life. So far the only actual bug I've found is the one I mentioned before with the custom auto brightness levels. I've had zero problems with calls and I can tell you that the camera works, but just that. I don't actually use my camera as much as I could, or should for that matter.
Thank you.
I'll try to migrate to CM7 soon.
thanks _nop_
I thought it was very interesting
and I've tried rom miui 2.3.23 very smooth in 5 days.
only problem with the batteries only hold 12 hours of normal usage
advant1985 said:
thanks _nop_
I thought it was very interesting
and I've tried rom miui 2.3.23 very smooth in 5 days.
only problem with the batteries only hold 12 hours of normal usage
Click to expand...
Click to collapse
That is very strange because i installed miui 2.3.23 and i charge the phone sunday at 8 and now is tuesday and i still have 25% left and i thinc i used the phone around 40 min of video watching internet, 20 min of angry birds space, 40 min of phone chat and around 10 msg. and i thinc is going to hold until tonight.
well... finally
sergei, please touch it, and please make it patchable flash as dsc
thanks
Related
*************************
PureFroyo v1.1 Beta AOSP
*************************
Introduction
==================================================
- PureFroyo is an Android 2.2 Froyo FRF91 ROM built from AOSP (last repo sync: 2010-08-18)
- Pure, clean and fast without using any compiled MODs from others
- Self MODs of trackball wake; battery percentage and reboot/recovery options
- Bundle with IntersectRaven UV kernel for great battery life
- For Nexus One Only
Features
==================================================
- Android 2.2 Froyo FRF91 ROM built from AOSP (self compiled)
- Rooted with su + Superuser 2.3.4 (thanks ChainsDD) + Deodexed
- Busy box and Toolbox (sym link)
- Trackball wake only (self MOD)
- Reboot / Recovery menu when pressing power button
- Battery percentage (shows "F" when 100% full battery) (thanks CyanogenMod)
- Latest google apps (gapps-hdpi-20100817)
- Lock & Unlock sound
- Default black theme status bar with white text (thanks Geo411m)
- More notification sounds
- Froyo default a2sd
- Froyo default boot animation (that means no special boot animation)
- Kernel: IntersectRaven's 2.6.35_AVS-925mV_CFS_20100802_1056
- Wifi / Wifi portable hotspot / Camera all working
Something removed / not included
==================================================
- Camera click sound
- Amazon MP3
- CarHome related
- Twitter
- Voice Search
- ChromeToPhone
- Google Voice
- Google Talk
- A2SDEXT (not tested)
Instructions
==================================================
Install this ROM through recovery:
1. Nandroid backup first!
2. WIPE cache + dalvik-cache
3. Flash PureFroyo from SD
4. Reboot
Notes
==================================================
1. You MUST be using the Froyo radio, see the first post.
2. You MUST make a nandroid backup, I will not be held accountable.
3. Wipe cache and dalvik-cache, no need to wipe data in most cases
4. Remember that if you use this ROM, you do so entirely at your own risk
Special thanks to
==================================================
Paul , Pershoot , Cyanogen , Leo , Geo411m , IntersectR , Wildmonks , coolbho3000 , paratox , vnbuddy2002 , djmcnz , evild , MicroMod777 , JupIterdroid , 928Droid , crimsondr , Eliotstocker, Google search engine, github, updater-scripts from all ROM gurus for reference, all kernel gurus, and others that I cannot remember the name...
The purpose of this ROM is to share a completely AOSP built ROM that used by me daily. I may/may not continue to update this ROM but is welcome for opinions and pinpoint of any errors or in which line of code that I can improve. Some of the features such as trackball unlock, hangup, alert are not implemented because I am not using these features, thanks for accepting these.
I am trying different kernels everyday and let's try out which one is best to you. Of course, this ROM is compatible with most of the kernels including stock / pershoot / wildmonk's etc...
Thanks all for accepting a junior member here posting with poor English and wish all of you enjoy this ROM.
Let's try out the ROM here:
Main site: >> http://www.mediafire.com/PureFroyo <<
Change in 1.1 Beta:
- Fix Setup Wizard bug
- More complete build.prop
- More complete apns-conf.xml APN list
- Revised hosts file
- Default kernel changed to Wildmonk's 2.6.35_SVS-950mV_CFS_AXI_NoAB_No720p_1113MHz_081910
- Replacement of stock icons for: Browser, Calculator, Clock, Calendar and Messaging.
- Misc. bug fix
PureFroyo 1.1 Beta (2010-08-26)
MD5 Sum: 1e152d42a31d15fae2ba3c2b92e3a34c
Mirror: PureFroyo1.1Beta_signed_082610_201156_rel_.zip - 63.51MB
PureFroyo 1.0 Beta - 1st beta (2010-08-24)
MD5 Sum: 0da6748c75365adb886cfb1141c34a19
Mirror: PureFroyo1.0Beta_signed_082410_233410.zip - 63.39MB
Screenshots (2nd screen's icons are not included in the ROM )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
New icons for 1.1 beta
Always nice to see new people building from source! Good job!
Sounds good. BTW, thanks for the mention
Mmmmhh.. No Flash Player in the market :/
Trackball alert support please
Ok, I tried out your rom. Multiple attempts to install.
I get - first off a choice of if I want to use the wizard or not, and that seems wrong.
Then I use the wizard once, it crashes to the beginning, I use it again and it FC's.
After that I cannot get on my network, I do a network search, find ATT and select it but never connect.
I have tried every way I can think of to make it connect to ATT but it will not.
Thanks for the attempt at the ROM, but I had to uninstall it.
snlu178 said:
Ok, I tried out your rom. Multiple attempts to install.
I get - first off a choice of if I want to use the wizard or not, and that seems wrong.
Then I use the wizard once, it crashes to the beginning, I use it again and it FC's.
After that I cannot get on my network, I do a network search, find ATT and select it but never connect.
I have tried every way I can think of to make it connect to ATT but it will not.
Thanks for the attempt at the ROM, but I had to uninstall it.
Click to expand...
Click to collapse
Well, I have tried myself to wipe data (all) when installing the ROM and it is OK.
But most of the case, you do not need to wipe data. Just wipe cache + dalvik-cache, you should not be seeing the wizard.
BTW, can you PM me the logcat and which radio version you are using? Thanks.
**Update: I have just wipe data + cache + dalvik-cache and re-install the ROM -> can go through the wizard without any FC. For network problem, is that you do not type in a correct APN?
great rom thanks
we need more roms like this one, thanx and hope you keep up the work....
Where did you get icons from second pic?
noonerealy said:
we need more roms like this one, thanx and hope you keep up the work....
Where did you get icons from second pic?
Click to expand...
Click to collapse
thanks, icons are come from crystal project, more icons are still under modifications
Sent from my Nexus One using XDA App
I will release version 1.1 Beta within few hours later.
It would include:
- A more complete build.prop
- A more complete apns-conf.xml APN list
- A revised hosts file
- Default kernel changed to Wildmonk's 2.6.35_SVS-950mV_CFS_AXI_NoAB_No720p_1113MHz_081910.zip
I am thinking of whether to include a few ICON replacements for the stock browser, calculator, calendar, clock and messaging. Icons are from crystal project in which they are under GNU public license.
Any ideas?
uhm....self MOD br0!....srsly...srsly?!!!one!one!11!1one!?//?/?slash?.....*sigh*.....
ardatdat said:
Well, I have tried myself to wipe data (all) when installing the ROM and it is OK.
But most of the case, you do not need to wipe data. Just wipe cache + dalvik-cache, you should not be seeing the wizard.
BTW, can you PM me the logcat and which radio version you are using? Thanks.
**Update: I have just wipe data + cache + dalvik-cache and re-install the ROM -> can go through the wizard without any FC. For network problem, is that you do not type in a correct APN?
Click to expand...
Click to collapse
Apologies I did not log in till just now. I have installed InnovationOS so I don't have my log cat. However if you find it critical I can go through the install again and get it for you.
As far as APN. I have to admit not editing it. I did search for the network, it found ATT and I told it to select it. It would register but never get edge or 3G.
I do commend you. It's a great build idea. Check out Liquid Froyo on the droid. They are making slim lean and mean droid builds. I would love for that on my N1
Let me know if you want that log cat. It may take a day.
snlu178 said:
Apologies I did not log in till just now. I have installed InnovationOS so I don't have my log cat. However if you find it critical I can go through the install again and get it for you.
As far as APN. I have to admit not editing it. I did search for the network, it found ATT and I told it to select it. It would register but never get edge or 3G.
I do commend you. It's a great build idea. Check out Liquid Froyo on the droid. They are making slim lean and mean droid builds. I would love for that on my N1
Let me know if you want that log cat. It may take a day.
Click to expand...
Click to collapse
No worry, I am improving the APN list so that you will find a more complete APN list in the next build. Thanks for your support.
The new 1.1 Beta is released!
Please try it out! Especially those who have experienced setup wizard bug, this version should have fixed it
hi ............
your screen shut doesnt show up in my browser .........
please attached theme in the site
B.E.H.N.A.M said:
hi ............
your screen shut doesnt show up in my browser .........
please attached theme in the site
Click to expand...
Click to collapse
OK, attached.
a little tip:
When building, you can use:
Code:
TARGET_NO_RADIOIMAGE=true make otapackage
It will automatically create an update zip with updater-script and sign it for you. Saves a TON of time
great rom
thanks , great rom.keep it up.
Hi could you add Gtalk and trackball colors? that would make it great!
THanks..
LeoGingerBread v0.9.7 built from sources (AOSP and CyanogenMod 7) with LeoParts v8
STABLE -- Wipe only requiered the first time.
[Mainline]
I build GingerBread from AOSP (android 2.3.1/GRH55).
Then I came to an end because I don't have hardware skills in Android (Camera, WiFi, FM Radio)...
So I build what my ROM was missing from CyanogenMod, which includes: cm-kernel, some libs, Camera, large part of the framework etc.
I then kept my LeoParts to setup everything easily from an Interface similar to Settings.
So this ROM is android 2.3.2/GRH78.
Do note that my implementation of OldApp2SD is still work in progress.
I also spent too much time compiling/cooking and now want to spend more of my free time on LeoParts, Mods and Apps.
Thanks to CyanogenMod project!
Thanks to Elegos for his RomUpdater!Thanks to: CyanogenMod team (Cyanogen, Wysie, ctso, jeagoss, kmobs...), Enomther, chainsdd, paulobrien, clarksonator, Jr33, fitsnugly, lilHermit, britoso, Zaraki...
And thanks to all XDA Community!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Features]
Build from AOSP: Android 2.3.2 / GingerBread / GRH78
Stim toolkit + Terminal
Additional languages (system + keyboard)
cm-kernel 2.6.37
Stock Launcher2
busybox 1.18.0 (linked)
Rooted (su + Superuser 2.3.6.1)
Reboot options on power button (from eddieringle)
LeoParts v8
Video recording HQ
FM radio
ROM infos
Quick commands
Tweaks
User Interface
Apps & Addons (built-in kitchen)
Advanced
Data storage (a2sd)
About
Phone Mod: Trackball answer/hangup etc. from CyanogenMod
Browser Mod: download any file type etc.
Contacts Mod: with the dial button etc. from CyanogenMod
DeskClock Mod: from CyanogenMod
Lockscreen Mod: MusicControls, etc.
Status bar Mod: battery percentage, H icon, headset icon etc.
Messaging Mod: black background, back to all threads etc.
Browser Mod: incognito, user agent etc.
Network: supports adhoc, added OpenVPN (not tested yet)
Old App2sd method (not DT's but mine)
180 rotation added (optional)
Screen ON/OFF animations (both on by default)
Clear notifications one-by-one by swiping (on by default)
Custom number of recent apps (8 by default)
Custom app by long pressing home
App killer by long pressing back
Trackball Wake (on by default)
Trackball Unlock (off by default)
Trackball Alert support (OpenSource framework)
Quiet hours
Disable or change Battery warning level
GalaS power widget in status bar (and configurable)
Custom hostname
SIP not only over WiFi
FileManager
Overscroll effects
FLAC support
nano, bash, libncurses, htop etc.
Battery percent on LockScreen
Transparent notif. bar
Album art on LockScreen
...
Check the FAQ in POST #2
http://forum.xda-developers.com/showpost.php?p=10518706&postcount=2
[Downloads]
Although I'm testing my rom, let's it be clear: Remember that if you use this ROM, you do so entirely at your own risk !!!
Do NOT download if you haven't read this post entirely.
You need HBOOT 0.35.0017 [only requiered once]
You need FroYo's radio: 4.06 or above [only requiered once]
LeoGingerBread v0.9.7 AOSP/CM7 (no GApps)
LeoGingerBread_0.9.7-noradio-signed.zip
[Instructions]
nanbackup [recommended]
WIPE ALL (data + dalvik) + EXT
update HBOOT [if not done yet] (flash in recovery as usual)
update radio [if not done yet] (flash in recovery as usual)
flash LeoGingerBread
flash GingerBread Google Apps
fix uid_missmatch in recovery
Thank you so much for donating !
FAQ
Q: How to flash the HBOOT update?
A: Just as a regular update.zip: throught recovery
Q: How do I get TrackBall Alert to work?
A: Simply use Menu / Patch / Smali / Android 2.3 GingerBread (non-sense) and you're good to go!
Verified with TrackBall Alert Pro.
Q: Some GApps are missing?
A: Depending on the version of GApps, it might not include some packages. Go to the Market and download them.
Btw, this saves /system space.
Q: My Gmail is not syncing?
A: Go to Phone Settings / Accounts & Sync and activate Gmail sync on your Google account.
Q: How can I activate OldApp2SD?
A: OldApp2SD is automaticaly restored at boot if it was activated before.
This has been done to be easier for everyone, especialy for end-users.
Anyway, to activate it, just run 'a2sd on' in a terminal / adb shell. Requiered only once.
Q: What about dalvik2sd etc?
A: Same as OldApp2SD. Restored automatically on ext part presence if activated before.
To activate advanced 2sd methods, use dalvik2sd / data2sd / media2sd commands.
Q: How to disable OldApp2SD methods?
A: Instead of running, for example, 'a2sd on', just run 'a2sd off'.
Q: How can I easly upgrade to a newer version?
A: Check the new versions with RomUpdater (by elegos) and install the incremental update.
If you had OldApp2SD activated, run 'fix uid_mismatch' from recovery right after the flash to prevent any problem.
Then reboot and OldApp2SD will be activated automaticaly.
Q: I found a bug...
A: http://code.google.com/p/android-leonextlevel/issues/list -- thanks
Q: Can I port this ROM to another device?
A: Long story short: no. But I can, if I have the device IRL.
Q: ETAs?
A: I'm updating my twitter account @leonnib4 often enought for you to know when a new version will be out.
Don't ask for ETAs.
Q: Why are you formatting SYSTEM: during the flash?
A: I can't do otherwise.
Q: But it removes GApps (that are on /system/), so you have to flash them again, right?
A: Right, but this won't happen if you're using an incremental update from RomUpdater, so it should never happen
Q: How to get and post a "logcat"?
A: From a terminal, run 'adb logcat > file.txt' (it puts the output of the logcat in a file named "file.txt".
Then upload this file to pastebin.com or similar.
[Mainlines]
0.9.x / 07-feb-2011 / AOSP/CM7 release - RC - LeoParts v8
0.8.x / 11-jan-2011 / First XDA release - Beta - LeoParts v8
[ChangeLog]
0.9.7
- Improved scripts
0.9.6
- Improved scripts
- Fixed updater-script
- Added OTA killer
- Updated help in LeoParts / Data Storage
0.9.5
- Improved scripts
0.9.4
- Fixed OldApp2SD
- Fixed RomUpdater auto-conf
- Fixed Terminal auto-conf
- Restored AOSP Phone.apk
- Phone: SIP: Allow per-account User-Agent string configuration
- Phone: Add an option to disable voicemail notifications
- New LeoParts/DataStorage
- Updated busybox to 1.18.0
- Updated LockScreen AlbumArt
- Replaced Stock Music app with Music^3 "Cube"
Welcome back m8!!
welcome back king...
downloading.....
now i can stop my work on ginger
thank's
thank you leo! Never thought id see u again! Love your work. You honestly made my day! Thank you, thank you, thank you!!
welcome back Leo!
Sent from my Nexus One using XDA App
Data storage option in LeoParts causing fc.
steeler2003 said:
Data storage option in LeoParts causing fc.
Click to expand...
Click to collapse
Damned.
Bad copy/paste.
Uploading fixed update.zip
Also I'm noticing some reboots when LockscreenMusicControls is not on...
I'm working on a fix.
Thx everyone for the kind words.
EDIT:
I repacked the ROM.
For those who only want the fixed LeoParts: http://www.multiupload.com/RUW015YEDS
Went to Tweaks in LeoParts, then set stock App2Sd to external and that worked.
Welcome back and thanks for your work Im gonna try this !
Kissesssss
hello, i have ext3 on sd cad, app2ext not work for my.
Excellent to see you back Leo. Look forward to testing this out when I get home.
Sent from my NOOKcolor using the XDA app.
@steller this is the stock a2sd by Google. It stores on fat32 not ext3
@roxtedy the a2sd button is not enabled yet in leoparts/data storage.
But a2sd works.
Could you describe a little bit more your problem?
Sent from my Nexus One using XDA App
how to activate a2ext? I have full internall memmory..Thanks
welcome back.
and thank you for not using DT a2sd, cuz i hate it.
The previous few comments regarding apps2sd had me a bit confused. If you are trying to move your apps to your ext partition as opposed to the Google method which moves them to the fat partition on your sd into the sd/androidsecure folder then do the following as this is the way I find it works in this rom as of this moment.....in leoparts when you click on "data options" the "Old App2sd" check box is greyed out and currently not an option that can be chosen. To get around this issue until Leo has time to deal with it you can try this which worked for me---open terminal emulator app and type this:
su (hit enter)
a2sd on (hit enter, wait a bit for process to finish)
reboot (hit enter)
That should enable "old app2sd" moving your apps to your ext partition. You will see the checkmark is now in the "old app2sd" box in leoparts data options tab. The apps are moved to system/sd which root explorer is showing me as being on my ext3 partition. So far I've had no problems. Hope this helps if you're like me and suffer from too many apps and too little patience
Does this have the notification powerbar like CM? I just use it too much to lose it.
What is the name of that clock widget please.
included in this Rom:
fully working Video Recording [No Zoom&LED in stock App]
fully working Camera [No Zoom&LED in stock App]
Zoom&LED is only working with Vignette App [Market]
MIUI Keyboard
MIUI Animations
latest Xperia ARC Style
Xperia ARC Dialer
Xperia ARC Launcher
Hardware Led working
LED Flashlight working [for Camera Flashlight use Vignette]
Gapps already included
Build.prop Tweaks
Automatic CPU Profile Switcher
VM/Sysctl Tweaks
Kernel Tweaks
Minfree/Autokiller Tweaks
I/O Scheduler Tweaks
Reduced Lags
Better Memory Management
Undervolted CPU
alot more so Test it now
Instructions for fresh Install:
1. Go to Xrecovery and make a Backup of your current ROM (optional but i suggest it)
2. make following in Xrecovery
- do a Factory Reset
- Wipe Cache Partition
- Format Cache
- Wipe Dalvik Cache
3. Install Custom Zip and choose Xperia_TW_V007.zip
4. Go to CyanogenMod Settings/User Interface/Tweaks extras and Select a theme and choose Xperia TW [For Custom Kernel you need to do this Method maybe]
5. Reboot
6. Enjoy
Troubleshooting, Addons, Optional Downloads, Themes & Donate:
CLICK HERE for DATA RESTORE
Please uninstall Autokiller or SetCPU becouse my new Tweaks offers own values so you dont need them they would only couse Conflict.
1. Dont restore Data [only APK with a 3rd Party Market App but never Data] [use Tutorial above]
2. Make a fresh install of 2.1 and then my ROM if you have weird/battery issues
3. When Baseband is Unknown you need to Crash System Server with Development App [Bad Behaviour] or reflash Baseband/ROM
Answers to Questions & Troubleshooting
Optional Downloads & Extras
Themes
Optional Updates for ROM:
Full Transparent Addon for V007
[Phone,MMS,InfiniteView and Dialer Transparent too]
http://Wolfbreak.sylvester20007.com/V007TransparentAddon.zip
Game Compatibility & Bootanimation Fix
[Brings back Bootanimation and fixes Compatibility issues with Apps/Games but remove FuguTweaks]
http://www.mediafire.com/?oeo5a0ue5m8uc5x
ROM Download:
Xperia_TW_V007.zip for Baseband 54/55/58/61/65/67
V007 Changelog here
http://Wolfbreak.sylvester20007.com/Xperia_TW_V007.zip
Xperia_TW_V007.zip with Custom Kernel for Baseband 49/52
Changelog & Info here
http://Wolfbreak.sylvester20007.com/XTW_V007_CustKernel.zip
Patch to use 4x-52 Baseband
[If you dont want V007 with Custom Kernel use this to Patch the 54+ ROM to 4x-52 BB]
http://www.multiupload.com/U020F08R3N
Credits:
Credits go to zdzihu,jerpelea,TripNraver,akila87,myth999,kifno,28spawn and all others, there are too much People that do much for X10.
Donate:
If you like to buy me a cold beer feel free to do it here .
Screenshots&Videos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks great, already downloading! Improvements sound very promising, too. Good possibility that this is a longtime ROM for me
Just a little suggestion: Perhaps you can mirror your theme somewhere else because free users cannot download two files simultaneosly from Hotfile and I think there's also a download limit after the first file. I'd suggest megaupload or mediafire
Answers to Questions:
If you want to restore Contacts in the new Phonebook you need to connect to your Google Account first before it doesnt work but if you are connected vcf import is working fine!
----------------------------------------
Sysctl is included in v05, you dont need the App anymore with v05
----------------------------------------
Older Timescape wont work on v05 no TimescapeV1,V2 or v2 fixed you need v02 and you need to flash it right after ROM without rebooting.
----------------------------------------
BB Patch includes old 4.1 Settings so i dont recommend it and excluded it from first Post becouse there are alot important Steps for Battery and Performance in build.prop since v05
----------------------------------------
CM Update and Stats Settings FC is normal becouse i deleted this crap Update and Stats App we have no cracked Bootloader and no official Cyanogenmod its like you install 2 Applications you never use in your life and cannot even use when you want it becouse no off. CM for X10 its just Battery Hog and wastes Internal Memory Space
----------------------------------------
InfiniteView is to View Contacts in SE Phonebook
----------------------------------------
Evenstream is from Timescape so you probably did installed Timescape wrong not like i described in 1 Post if you get FC
----------------------------------------
For Facebook Contact Sync look here.
1. Flash v05 rom
2. Flash Timescape v02 and other Arc stuff if you want
3. reboot into phone, setup Google sync, log into Market
(and flash new market if you want)
4. reboot into xrecovery, flash v053 update
5. Flash fb.zip and Contacts_ProSE_FIXED.zip provided by akila87
It seems like the fb contact sync will be broken if you flash any v05 update
after flashing Contacts_ProSE_FIXED.zip.. and reflashing the fix again won't help,
as I lost the profile pics in the phonebook after installing v052.1 while it was working before.
Do not flash v05 main rom, then v053 update and FB contact fix all in one go.
it will give you a series FC and phonebook wont work.
http://forum.xda-developers.com/showpost.php?p=12422358&postcount=4369
Troubleshooting:
Battery drain:
Make sure none of your Apps is draining and you installed all properly.
If nothing works reflash latest 2.1 ROM completly new and then my ROM
Restore Data:
Restore Data in Xrecovery can couse Battery drain or force closes
Use Titanium Backup/MyBackup or use this Method
Vpn not working:
1. use root explorer
2. change to /system/etc/app
3. check all Permissions of < ip-up-vpn > file
4. done!
No Signal:
1. Go to Development App
2. Bad Behaviour
3. Crash System Server
4. Wait for Reboot
If that not works try this
Application not installed:
for those who have problem regarding 'application not installed' try this
use root explorer and delete the smdl2tmp1.asex
hope this helps
/mnt/secure/asec/smdl2tmp1.asec
Bluetooth issues:
1. Try this App [ http://www.foogod.com/android/ ]
2. Download APK and put on your SD Card
3. Install with a File Manager
Wifi issues:
1. Go to Settings
2. Wireless&Network Settings
3. Wifi Settings
4. Press left Hardware Button to get more Options
5. Select Adcanced there and click Wifi Sleep policy and set to never
6. If still not working properly download Blade Wifi Fix from Market
Posted by a Users
For those who have wifi connection problem. please try this method. it works for me, but i am not sure if its will works for u.
go to setting, wireless and network setting, wifi setting, press option keys, select advance, tick use static IP and then key in the require field.
the require fields are different for every one
if u din know how to key in try this,
on ur comp (win7), click start and search for "Network and Sharing Center"
then click on Local Area Connection
then click on Details
there will be a pop showing all the requirement required
remember dun use the same ip add for ur rom
and no spacing. like 192.168.1.1
ps: i would recommend to use google dns ( DNS 1 : 8.8.4.4 , DNS 2 : 8.8.8.8)
-------------------------------
This is what I do to connect to my schools WPA network. thanks from posters in the thread.
1.Download and install wifi advanced configurator.
2.Go to your wifi settings and add a network with the same name BUT leave the network security to open.
3.Go to wifi advanced configurator ( if the new saved network does not appear wait a while or reboot) and edit the new network
4. You need to change security from Open to WPA
5. go to protocol and make it PEAP
6. go to credentials and add username and password
7. try connecting at the settings menu now. it should be saved.
a.monteiro said:
Hey Wolf, just noticed something: i un-checked "battery percentage" on CM settings and it was saying i had 58 percent battery left, then i checked it back and it showed me 95 percent! i plugged it and it was "charging (95%)"
perhaps a glitch on the icon could be leading to erroneous battery drain issues?
Click to expand...
Click to collapse
Video jumps every few Seconds?
diimaan said:
try changing the focus from continuous to infinite!
Click to expand...
Click to collapse
Well I could only mirror the ROM itself if you want me to. I cannot download the theme right now because of the mentioned download limit at Hotfile I'll post a mirror for the ROM then and you'll include it to the first post, alright.
Uploading...
Trying it out now!!!
qwer23 said:
Well I could only mirror the ROM itself if you want me to. I cannot download the theme right now because of the mentioned download limit at Hotfile I'll post a mirror for the ROM then and you'll include it to the first post, alright.
Uploading...
Click to expand...
Click to collapse
Thanks...everyone knows hotfile has a long wait ha!
Addons, Optional Downloads & Extras:
----------------------------------------------------
Addons:
----------------------------------------------------
Full Transparent Addon V007
[Phone,MMS,InfiniteView and Dialer Transparent too]
http://Wolfbreak.sylvester20007.com/V007TransparentAddon.zip
Full Arabic Language Support Addon
http://forum.xda-developers.com/showthread.php?t=1049936
Undervolt Addon
http://forum.xda-developers.com/showthread.php?t=1061691
Xrecovery 1.0
http://www.mediafire.com/?pnnco4hem7a5pcp
Xrecovery 0.3 compatible zip to 1.0 Converter
Use this to convert old Xrecovery 0.3 zip files to 1.0 compatible one
http://forum.xda-developers.com/showthread.php?p=14341259#post14341259
----------------------------------------------------
Optional Downloads
----------------------------------------------------
Un-restrict Facebook Contact Data
http://forum.xda-developers.com/showthread.php?t=1061521
Newest Market for older ROMs then V007:
[Login once into included then you can flash the new Market in XRecovery]
https://sites.google.com/site/xandrotest/file-cabinet/NewMarket.zip?attredirects=0
Extras:
If you want to restore Ringtones press HERE
If you want to restore Notifications press HERE
If you want to restore Live Wallpapers press HERE
If you want Sony Ericsson ARC sound files press HERE
If you want ARC Retail Timescape press HERE
[Dont use InfiniteView included in this Package, delete it or replace with the one from my ROM otherwise it will FC]
If you want News and Weather Widget press HERE
If you want Sony Ericsson Backup & Restore press HERE
If you want DSP Manager press HERE
If you want Data2SD press HERE
If you want your Bootanimation back instead of Fugu Tweaks press HERE
If you want to test the new Maxthon Browser press HERE
Data2SD is experimental it will give you great Benchmark scores but its not
recommend as its not 100% stable and you need a better SD Card then the
stock Class 2 one. Data2SD is not App2SD. Data2SD puts your ROM on SD Card
to run from SD Card instead of internal Memory and App2SD puts your Apps on
SD Card and is already integrated in Android 2.2 and above.
Sry for Double post, please delete this post!
I have a slide keyboard open to continue? and the kyeboard doesnt show on-screen....any help there!
ok you can delete i figured it out thanks!!!!
Vindicated777 said:
I have a slide keyboard open to continue? and the kyeboard doesnt show on-screen....any help there!
Click to expand...
Click to collapse
It happens sometimes to me too its in SetupWizard right? Skip the Login on first SetupWizard and then open Market then it should asks you to log in then the Keyboard should show when you press something.
Yes...thats what i did too! Its really smooth as of now...on to installing apps back!!! Great job!! And thanks!!!
Mirror for ROM:
http://www.megaupload.com/?d=TEKTOVM1
Wolf, please include to first post. And pleeeease mirror the theme
edit: ROM is already running, and it's freakin' smooth and stable until now (it's not that long though ). Only bugs are the known bugs plus (don't know if it's already known) camcorder shows preview on low quality, but crashes when trying to record.
Well, i am testing It
Hello friend,
So it says here that camera works, video works, etc...
But does that means that everything works?
Bt, GPs, localization, Usb connection, etc..??
Thanks,
Nice job
LOVE the rom i restored my data from my beta4 and all is good
AGAIN LOVE THE ROM
edit: camera app cant control the flash
Does anybody know if the camera flash work? I just got a new Xperia X10. I lost my old one. So I'm catching back up on the progress.
Trying this out now! Thanks!
look at my sig
Vindicated777 said:
Thanks...everyone knows hotfile has a long wait ha!
Click to expand...
Click to collapse
this FW looks promising. however I'll stick with 2.1 cuz of HD video recording
wifi won't connect
my wifi keeps disabling itself, I've down a crash system in dev tools but still the same. Other than this a very good rom.
It works good, I restore data from cm Tamra and fine too, thanks
Sent from my X10i using XDA App
Page Last Updated: 06/11/11
Hello again everybody!
This is a Hybrid rom Based off of my Ideos S7 Froyo v1.2.1 /system/ with...
the /system/framework/ & /system/app/ of the S7 Slim firmware.
Everything works for me, others mileage may vary.
Also again, thank tri_zet for providing the firmware & check out his rom as well!
I'm not responsible for whatever happens to you
or your phone when you flash this...
Features:
- Apps2SD & No Apps2sd
- Rooted
- Framework-MOD
- Themed Launcher
- Fly-in Animations
- DSP Manager
- Default English Language
- Stable
- Task killer tweak for speed
- VM Heap 32mb (testing, let me know if you have problems)
Add-ons:
HWime.apk - Huawei Stock Keyboard
Button Savior (Software keys) d/l from market
Original Framework/Remove MTN Shutdown
Xoom Bootanimation - Flash with CWM
Honeycomb Wallpaper Pack - d/l from market
-------------------------
06/11/11
Framework-Mod! - MORE BLUE! - THEMED LAUNCHER!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(zxhian & joenilan mixed framework-mod)
- Honeycomb Icons
- Launcher Themed
- New Font (Comfortaa)
let me know if you see something missing!
-------------------------
Screenshots:
------------------------------------------------------------
Current
FroyoFusion Release 2 - Apps2sd
FroyoFusion Release 2 - No Apps2sd
------------------------------------------------------------
Old Versions
FroyoFusion - Apps2sd - Re-Released so re-download!
FroyoFusion - No Apps2sd
------------------------------------------------------------
Installation Instructions:
Flash First! ONLY IF YOU'RE ON 2.1 ECLAIR
Located here: Froyo Android 2.2.2 Indonesian Updata
then you flash this!
New Recovery: CWM 2.5.1.8 by goodoane
--------------
1. Copy FroyoFusion.zip to INTERNAL sd card
2. Wipe/Data Factory Reset
3. flash with Clockworkmod
ROM REBOOTS AFTER FIRST BOOT
Apps2sd Instructions
- Ext Partition MUST be on the internal SD card formatted as ext2 as a primary partition after your fat32 partition. Use easeus partition manager.
- Note: It's reported that reflashing this rom over it's self after installing apps frees up more space, so if your data partition is getting filled, reflash this without wiping and you should have a lot more space free, some apps may force close, just re-install them
- Some apps & games like Angry Birds or Pocket Legends install to the sd card right from the market,
this bypasses the roms a2sd and uses froyo's which we all know eventually fills up space.
So what you have to do is:
Menu>Settings>Applications>Manage Applications>SD card
Move all listed back to tablet. Reboot.
------------------------------------------------------------
Not Working/Bugs:
Skype outgoing call turns off speaker, still works with headphones though.
Soon to come:
not sure...
------------------------------------------------------------
Changelog
06/06/11
- Xoom Bootanimation
- Ideos Shutdown (Removed MTN Shutdown thanks zxhian)
- zxhian's framemod (a dirty port from my 1.2.1, some graphic glitches, nothing bad)
- 3d Gallery (original still included)
- Removed:
****- EmotionVideoWidget
****- EmotionClockWidget (not weather)
****- EmotionBookmarksWidget
- Added Disk Usage Analyzer
- Added Darktremor's A2SDGui (good for a2sd - Not Included in no_a2sd)
- Added Gingerbread Keyboard (original still included)
- Optipng'd the Launcher.apk so far (i'll optimize other things soon! Still huge 19mb though)
05/27/11
- Apps2sd & No Apps2sd Versions
- Re-Release
- DSP Manager
- Task Killer Tweak
- Pretty much stock
- Removed Gmail, Youtube, Maps, Facebook, Twitter, Street Maps
- Fly-in Animations
- Dalvik VM Heap - 32mb (Testing, let me know of any problems)
------------------------------------------------------------
This is really awesome. Thanks for this.
It works fast and fine.
After the first installation I had a strange faillure: Whatever app I installed, it DID install, but the Tablet rebooted immediately after.
I then installed again without wipe and all is OK now!
Thanks for another good work!
Where did u get the wallpaper ?
macfreaker said:
Where did u get the wallpaper ?
Click to expand...
Click to collapse
comes with the stock launcher
Looks amazing! I was waiting for a nice semi-stock looking rom. Will try it out later today.
Your download link for the App2SD version is broken. Here's the working one from androidtablets:
http://adf.ly/1esbm
rkarsk said:
Looks amazing! I was waiting for a nice semi-stock looking rom. Will try it out later today.
Your download link for the App2SD version is broken. Here's the working one from androidtablets:
http://adf.ly/1esbm
Click to expand...
Click to collapse
thanks for that, i fixed everything in first post now.
some add-ons too
This will work on ideos s7 dual camera bestbuy verison right?
How do i get the Huawei keyboard installed?
yes will work on bestbuy version, and installing the keyboard you should be able to install it by putting on your sd card use file manager locate it and install if not, try root explorer and move to /system/app
@joenilan first of all i love your roms. But i got a small problem with your new one (froyofusion R2). The battery indicator in the status bar stucks while charging.
The battery-Status in the lockscreen works well.
Magixo said:
@joenilan first of all i love your roms. But i got a small problem with your new one (froyofusion R2). The battery indicator in the status bar stucks while charging.
The battery-Status in the lockscreen works well.
Click to expand...
Click to collapse
thanks man, download the new framework-mod from the first post, fixes that, and mostly everything else, also themed the launcher a little bit, and changed the fonts
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
robetheria said:
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
Click to expand...
Click to collapse
If you are using the Best Buy S7 then no, multi touch will not work. The resistive touch screen can not support multi touch gestures.
robetheria said:
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showpost.php?p=13839083&postcount=32
Thank you man, you're the best
aolander said:
If you are using the Best Buy S7 then no, multi touch will not work. The resistive touch screen can not support multi touch gestures.
Click to expand...
Click to collapse
I use capacitive one....
Can some one please mod the framework-res.apk for making the status bar and the font smaller like in the Samsung Galaxy tab? Thank you...
This rom is to install S7 Slim?
UMTS gone
I have installed this ROM, it's running like a charm.
But... Somewhere in the process I have lost the ability to connect to UMTS.
Only options are GSM and WDCMA.
Any method how I can get UMTS back??
DO THIS AT YOUR OWN RISK.
I AM NOT RESPONSIBLE IF YOU BRICKED YOUR DEVICE.
Do research and reading if you are uncertain about this rom.
WHAT IS IT?
There are many great ROMs out there, with the more popular ones being AOSPA (ParanoidAndroid), CM10.1, and AOKP. Being all great ROMs, it is sometimes difficult to choose which one you want to run. Why choose when you can have all three? P.A.C.-Man ROM is combination of all three ROMs, so you don't need to keep switching or deciding between which one to flash. Get all of the features in one ROM!
If you like the default wallpaper
FEATURES:
Tablet UI
Customized Trebuchet Launcher
A lot of customizations (PIE nav, hybrid settings, per-app color)
Based on ParanoidAndroid, AOKP, and CyanogenMod
Kernel 3.0.70+
CWM 6.0.3.0
QUESTIONS AND ANSWERS
CHANGELOGS:
Look at PAC source history for further changes, I will not post them.
03/22 – Repo synced, Initial build so there could be many bugs.
03/29 – Repo synced, kernel updated to 3.0.71, fixed: calendar crashing in portrait mode, boot animation, high battery drainage in deep sleep, some heat issues when device is in high load (maxed frequency) for long period, removed phone and phablet ui from Hybrid Properties (Default Tablet UI) , default boot orientation is landscape (Don’t ask why).
04/10 – Repo synced, kernel updated to 3.0.72, NO MORE DEEP SLEEP (deep sleep does not help reduce battery drainage when device sleep but causes problems with our current kernel), improved battery drainage in sleep, the device will wake and get charged when you plugged in power cable, changed default governor to Wheatley for lower battery usage, added back 1.2GHz, removed faked battery data (you will need to do a full charge, green light, to get accurate battery stats), used Wi-Fi codes from BN, Wi-Fi is set to turn off when the device sleep, added back default dual-pane preferences, latest CWM 6.0.3.0 recovery, make use of sdcard0 (EMMC) as default storage for those without SDCard, added back Phablet UI to Hybrid properties (Navigation bar buttons and Battery bar options only work in Phablet UI currently).
Removed for now, rotation bug.
(Recommended factory reset for internal rom, clear data1/cache for sdcard rom)
GooManager: Rom ending in *SDC is for SDCARD boot, don’t get it mixed up with internal rom.
TO DO LIST:
Lots of things
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You need to do a full wipe (factory reset and wipe cache) if you are on a different ROM.
You need to wipe data1 and cache if you are SD booting.
You need to reinstall GAPPS after each ROM installation.
In the case you booted and all you see is black screen for a couple minutes, reboot to see if it's fix.
Initial booting can take several minutes.
INSTRUCTIONS:
Copy ROM/GAPPS into your Internal Storage on the device.
Reboot into recovery and install ROM from Internal Storage.
Full wipe can be done before or after installing ROM/GAPPS.
For SD booting, you need to make bootable SDCard first.
There are plenty of guides around.
INTERNAL ROM:
3553a264ba91539bf28b8c8a85cde57e *pac_acclaim_22.1.0_10APR2013_20_HD.zip
92a8c4c110c7af8687d31e53446a4470 *pac_acclaim_22.0.1_29MAR2013_12_HD.zip
eca68285b80b0fa509eaf2415a3f0090 *pac_acclaim_22.0.0_22MAR2013_12_HD.zip
SDCARD ROM: (Single boot) BOOT partition contents, boot.zip
82ba7cf586e1c92d72c7fc4a6414a9da *pac_acclaim_22.1.0_10APR2013_HD_SDC.zip
954bf02638b941d2a82119169dca9bd4 *pac_acclaim_22.0.1_29MAR2013_HD_SDC.zip
6475a3570c55bd863abeab724887ac73 *pac_acclaim_22.0.0_22MAR2013_HD_SDC.zip
INTERNAL GAPPS: *Might need to go to advance > fix permission in CWM before flashing GAPPS
4493696a11733e4e2a15d0026211963e *gapps-jb-20130301-signed.zip
c4a07a24e11448824b84e314600cd357 *gapps-jb-20121212-signed.zip
EXTERNAL GAPPS:
e2a80b77153a6bacd3df785742487ea3 *gapps-jb-20130301-signed-SDC.zip
36e9081e0dd29b67193d2db9441683c3 *cm-10.1-20121212-gapps-SDC.zip
THANKS TO (CREDITS):
bauwks - Bootloader exploits
CYANOGENMOD
Source - https://github.com/CyanogenMod
Web - http://CyanogenMod.org
CM G+ - https://plus.google.com/+CyanogenMod
PAC-man
Source - https://github.com/PAC-man
https://github.com/ParanoidAndroid
https://github.com/CyanogenMod
https://github.com/aokp
Web - ? (let me know)
PAC G+ - ? (let me know)
Members:
Alexander Pohl - OldDroid
AOKP Team
Arnav Gupta - championswimmer
berni987654321
bluefa1con
bulook
Chad Barlan - Papa-Smurf151
Chris Baughman - cmartinbaughman
CyanogenMod Team
Damandeep Singh - singhdd93
dman3285
ExPeacer
Faradis - Druboo666
garwedgess
Giorgio Andronico - BytecodeX
gs2usr
InfinityFTW
inyourface09 Blake
Jamie Gowans - jamieg71
Jeremy Mullins - shrike1978
kamarush
klin1344
Mark - Sniper-
metaiiica
n1kolaa
Nick0703 Nick
ParanoidAndroid Team
Rakesh Kumar - blindndumb
szlkiev - szl.kiev
vertigo2012
whirleyes - whirleyes
xLaMbChOpSx
NOOK TABLET
Source - https://github.com/CMNookTablet, https://github.com/Kuzma30
Members:
Brandon Bennett (nemith)
Chris (chrmhoffmann)
fat-tire
Hashcode
Kuzemko Alexsandr (Kuzma30)
Kyrylo Mikos (mik9)
Rebell
KINDLE FIRE
Source - https://github.com/loosethisskin, https://github.com/KFire-Android
Members:
Aaron Davis (icemank121)
Andrew Dodd (Entropy512)
Hashcode
IngCr3at1on
JackpotClavin
Jacob (drkhd)
John Craig (x0xhellx0x)
Loosethisskin (twa_priv)
Markus Cisler (bl1nk)
Raymond Jay Golo (intersectRaven)
Scott Brady (sbradymobile)
Shujun
SGT7
Source - https://github.com/sgt7/android_packages_apps_Trebuchet
Members:
Angel666
Chirayu Desai (chirayudesai)
eaut
Humberto Borba (humberos)
jt1134
Koudai Aono (koxudaxi)
pulser
redrebel696
Scott Brady (sbradymobile)
techomancer
COMPILER
Source - https://github.com/succulent
Web - http://iamafanof.wordpress.com
HD (Succulent)
Questions and Answers
Want to clear cache manually?
Delete the dalvik-cache folder inside cache folder with root access & restart.
Is Jellybean running slow on your NT? It might be your SDCard.
microSD Card Benchmark Comparison — CrystalDiskMark
Why do I have to wipe data/factory reset?
Dirty installation can slow the OS and causes side effects due to residue files still on system.
Want to swap your internal storage (EMMC) to SDCARD?
Edit /system/build.prop, persist.sys.vold.switchexternal=0 to 1
My converted MP4/M4v isn’t working?
Use Handbrake 9.4. The current ducati firmware is outdated and doesn’t support newer MP4 codec.
How do I edit system files?
Use FileManager, settings>change access to root access, & click on lock icon, change to RO>RW
How do I take screenshot?
Hold power button + volume down
Where’s Developer options & Performance?
Click Build number several times.
Want to save battery?
Rename system/apps/phone.apk to phone.apk.bk
Change CPU performance to 800 MHz max feq. and use conservative, click set on boot
For better standby battery, go to Wifi Advanced settings > Keep Wi-Fi on during sleep > Only when plugged in
Where’s bluetooth/OTG/USB Host?
…
Do I need to install GAPPS?
Only when updating as the image comes with GAPPS
Yes, you do need to reinstall GAPPS after each update.
Don’t like Media Transfer Protocol (MTP) and want USB Mass Storage (UMS)?
Edit /system/build.prop, change persist.sys.usb.config=mtp,adb to mass_storage,adb
Older Mac might need http://www.android.com/filetransfer/
How to I view sdcard1 (SD card) with FileManager?
Go to Settings and change Access Mode to Prompt or Root.
Google Voice crashes?
Update Google Search
Don’t see folders or files when clicked on Internal Storage or SD card?
Refresh
Do I need to root the device for CM ROM?
Rooting is the ability to use superuser for root permission on a system.
Mainly for stock Android with no superuser.
All CM ROM come with superuser access.
How do I block OTA updates from BN?
You don’t need to. You are running CM software not BN.
How do I wipe data on sdcard?
The latest recovery (Orange theme) has an option “Wipe data1 on sdcard”, that is wipe P3 on sdcard.
It’s similar to factory reset, only that wipe data partition on the internal memory.
Boot animation is messed up?
Yes, for now.
What about tethering?
It’s removed since CM7, I couldn’t get to work with all the outdated patches.
[REF][TWEAKS] Kernel Governors, Modules, I/O Schedulers, CPU Tweaks, AIO App Configs
http://forum.xda-developers.com/showthread.php?t=1369817
I am stuck in a recovery boot loop?
Flash this, flashable_fix_bootloop.zip, File>Download
GAPPS, stuck at Wi-Fi Connecting…?
Patient. Just wait up to a couple minutes.
Hulu Plus not working?
You need a cracked Hulu APK so search for it on XDA. Hulu works on stock ROM.
How do I increase animation speed?
In the developer options, change animation scale to none or 0.5x.
How do I change Trebuchet icon size?
Open drawer>menu>Trebuchet settings>Drawer/Homescreen>Icon scale
This rom is boring?
Isn't it?
I keep on clicking the download link and nothing happen?
The hosting site is down
When I play MP4, the video freezes?
It's the ducati acting up. You need to restart your device.
Blah blah blah gapps?
Try a different one, goo.im/gapps
What is the button with 3 dots inside the box?
That's the recent button and menu button merged together. Short press is recent and long press is menu.
Nook charger not charging, regular usb cable does charge.
Something is wrong with your adapter.
Get to know your NT for latest build.
In the storage settings, there are two internal storages. The top one is where your apps gets installed.
The space is 1GB/~5GB (if formatted) for a 16GB NT. This is data1 for SD boot.
The second internal storage is EMMC; it doesn’t reside on your SDCard. The default EMMC space is 11GB/7.5GB (if formatted) for a 16GB NT.
The EMMC isn’t get used so now it is. Your downloaded app data goes there. This is how most android devices are set up.
Now if you want your downloaded app data to go your SDCard, Settings>Apps>Select downloaded app>Move to SD Card.
Great work
Thanks for keeping the nook alive succulent....
In running PAC on my sg3 and cant wait to put it on the nook!
Keep up the great work and thx again
running fantastic. thanks so much.
Re: [ROM] Unofficial PAC-man Acclaim 22.+ [JB 4.2.2] [Nook Tablet][22MAR2013]
Will be flashing this tomorrow and will report back. Great work here, succulent.
Re: [ROM] Unofficial PAC-man Acclaim 22.+ [JB 4.2.2] [Nook Tablet][22MAR2013]
I'm not getting any sound on Netflix
Sent from my NookTablet using xda premium
Installed yesterday evening, looks great and seems to be running OK. Will update later, after I've had time to play with it.
Saludos,
SPC
sound in Netflix
ekennes said:
I'm not getting any sound on Netflix
Sent from my NookTablet using xda premium
Click to expand...
Click to collapse
Mine is working correctly. It might be simplest to clear the data and cache in Netflix (using Manage Apps) and starting fresh.
Calender not working ?
Calender says "unfortunately has stopped". Any ideas Thanks
sailerph said:
Calender says "unfortunately has stopped". Any ideas Thanks
Click to expand...
Click to collapse
Try reflashing gapps, usually does the trick
sailerph said:
Calender says "unfortunately has stopped". Any ideas Thanks
Click to expand...
Click to collapse
Download Google Calender from Google Play and Delete the original Calender by going to system/ app and Delete Calender.apk and CalenderProvider.apk
I love the rom and the extra ram that it gives me .
Dolphin HD?
I did a clean install of this ROM a few days ago. I haven't had time to really push it through its paces yet, but yesterday I found that I couldn't get Dolphin HD to run under this ROM. Tried rebooting, wiping cache and Dalvik cache, and uninstalling/reinstalling Dolphin HD, and am still getting the same result -- I launch Dolphin, get a complete white screen for about 2 seconds, and then return to the homescreen.
Tried reverting to my prior ROM (Demetrius' most recent SG7 Cherry Picks) via nandroid backup, and everything worked OK there. Reinstalled PAC-man and GAPPS last night, but haven't seen if that fixed the problem yet.
Anyone else see anything similar?
Saludos,
SPC
I noticed a few quirks:
In TabletUI modes, the navigation bar does not display the "3 vertical dot" Setting button for at least some apps such as ES File Explorer.
The home-screen's personalized wallpaper selection sometimes gets reset to the default (blue/violet) wallpaper when switching between UI modes.
The digital clock on the lock-screen (mine is "Fixed Clock" app) does not always get updated when the NT gets woken up from a prolonged sleep state.
The battery consumption is noticeably higher than that of Succulent's other CM10.1 builds.
On the new 03/29 build, following boot completion, is there a way to lock into portrait mode?
Will this work on an 8GB Nook Tablet?
ROM control > Navigation Bar > adding more button or changing existing one doesn't do anything. I'm trying to add a menu button.
Couple more issues
1. Wifi on while sleep does not stay on.
2. Nook charger not charging, regular usb cable does charge.
deboyz1014 said:
Couple more issues
1. Wifi on while sleep does not stay on.
2. Nook charger not charging, regular usb cable does charge.
Click to expand...
Click to collapse
My nook charger works and I think Wifi is like that to help save battery.
My nook tablet is not charging through a regular wall outlet in this rom. It only charges through computer USB.