Related
So, before I start this, Yes I was a noob. I didnt make a nandroid backup from when I first rooted my phone and everything worked 100%. I didnt read, and I guess its now biting me in the ass.
The past few months Ive been having issues with Wifi, it continuously says "Unable to scan for networks". I did a factory reset about a week and a half ago and for the first time my wifi was able to connect, however it was dropping out every couple minutes. Wouldnt even stay connected to install any market updates.
I figured that it was something with my dying router(Which Ive since replaced) so I flashed in BAMF to see if I could keep my wifi connection with another rom. Ive been using VirusROM(Love it even though its out od date). I wiped and flashed in BAMF, and restarted. When I restarted, I had no wifi again. Since then, Ive been trying out different ROMS and kernels in hopes that I would find something that would fix it. Nothing did.
After this I figured that I would just do another factory reset and go from there, however with all of the times Ive done the factory resets it never actually gets reset. Does it wipe my info? Yes, but it boots back up with all of the portions of whatever ROM I had installed last. Not reset. So now Ive ended up with two problems.
1. I still have no wifi
2. I cant factory reset so that I can figure out what is going on with my wifi.
Ive wiped Cache/Batt Stats/Davlick and done a factory reset literally six times in a row to hopefully clean EVERYTHING OUT to no avail. Any help with this would be greatly appreciated. I hope Im just missing something small because Im still new to android.
Edit: I DO NOT use kernel manager and I dont use ROM manager to flash it in, I flash everything in through recovery.
McLabia said:
So, before I start this, Yes I was a noob. I didnt make a nandroid backup from when I first rooted my phone and everything worked 100%. I didnt read, and I guess its now biting me in the ass.
The past few months Ive been having issues with Wifi, it continuously says "Unable to scan for networks". I did a factory reset about a week and a half ago and for the first time my wifi was able to connect, however it was dropping out every couple minutes. Wouldnt even stay connected to install any market updates.
I figured that it was something with my dying router(Which Ive since replaced) so I flashed in BAMF to see if I could keep my wifi connection with another rom. Ive been using VirusROM(Love it even though its out od date). I wiped and flashed in BAMF, and restarted. When I restarted, I had no wifi again. Since then, Ive been trying out different ROMS and kernels in hopes that I would find something that would fix it. Nothing did.
After this I figured that I would just do another factory reset and go from there, however with all of the times Ive done the factory resets it never actually gets reset. Does it wipe my info? Yes, but it boots back up with all of the portions of whatever ROM I had installed last. Not reset. So now Ive ended up with two problems.
1. I still have no wifi
2. I cant factory reset so that I can figure out what is going on with my wifi.
Ive wiped Cache/Batt Stats/Davlick and done a factory reset literally six times in a row to hopefully clean EVERYTHING OUT to no avail. Any help with this would be greatly appreciated. I hope Im just missing something small because Im still new to android.
Edit: I DO NOT use kernel manager and I flash everything in through recovery.
Click to expand...
Click to collapse
I'm sure there's an RUU out there that will take your phone back to stock but I honestly doubt that's the issue here. What radio version are you using? Have you tried flashing different radios to see if that would fix it. You can find a list here http://forum.xda-developers.com/showthread.php?t=1045081. Also what ROM are you currently on?
When you install a ROM, it modifies the /system directory which is responsible for everything, how the rom looks, included apps, drivers etc.
When you do a factory reset, I'm guessing through recovery, it is only clearing the /data and /cache partitions.
You will have to flash a stock RUU to get it to truly go back to the day you got it.
Here are instructions on how to return to stock:
http://forum.xda-developers.com/showthread.php?t=1009423
devindpotts said:
I'm sure there's an RUU out there that will take your phone back to stock but I honestly doubt that's the issue here. What radio version are you using? Have you tried flashing different radios to see if that would fix it. You can find a list here http://forum.xda-developers.com/showthread.php?t=1045081. Also what ROM are you currently on?
Click to expand...
Click to collapse
The ROM Ive been on hasnt mattered. Ive jumped through BAMF, the new Cubed Rom, the Deodexed stock debloat and Virus' Airborne(which is my daily driver). Ive done the different radios. I was on the v2 leaked for a while, then I switched to the new 3g and old 4g to see if its worked but it hasnt. I may have to try out the original one and see if that works, but I havent had wifi since before I flashed in the leaked radio when it came out.
isdnmatt said:
When you install a ROM, it modifies the /system directory which is responsible for everything, how the rom looks, included apps, drivers etc.
When you do a factory reset, I'm guessing through recovery, it is only clearing the /data and /cache partitions.
You will have to flash a stock RUU to get it to truly go back to the day you got it.
Here are instructions on how to return to stock:
http://forum.xda-developers.com/showthread.php?t=1009423
Click to expand...
Click to collapse
Gotcha. Trying this now. I will make sure to make a nandroid this time if it works. lol.
@isdnmatt: Thanks, that got rid of my recovery problem
Still having wifi issue though. 100% out of the box stock and I get the "Unable to scan for networks
**** me, I should have read that before I did it. Now I have to reroot. Goddamnit.
Have had the same problem with WiFi before and after ADB root. It will sometimes forget both my home and work networks. I've found the problem usually occurs when I'm connected then move put of range. A reboot fixes the problem sometimes. Other times I have to re-enter my settings. I'm still on the stock Rom, nothing custom.
Sent from my ADR6400L using XDA Premium App
ILMF said:
Have had the same problem with WiFi before and after ADB root. It will sometimes forget both my home and work networks. I've found the problem usually occurs when I'm connected then move put of range. A reboot fixes the problem sometimes. Other times I have to re-enter my settings. I'm still on the stock Rom, nothing custom.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Thats a separate issue than what Im having. Im not having issues with it forgetting my networks. I cant scan for networks.
I am thinking of downgrading the radio.
EDIT: after LOTS of research here, I upgraded to MR2 and Gingervitis. All of my WiFi issues are gone.
Sent from my TBolt using XDA Premium App
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
vash265 said:
The gist of my problem: Earlier today I successfully installed the latest CM9 from Joker (.0.7.0.0). Unfortunately, all wireless services other than WIFI were down (including SMS and telephone), and on start the phone produced an error about the com.android.phone force closing (or some such). I figured I had screwed something up, so I reflashed the clean stock firmware.
Since then (roughly 12 hours ago), I've been getting the stuck on the boot screen whenever I try flashing CM9. Relevant details follow:
Logcat doesn't help -- it tosses an error about the shell directory or file not being found (the exact error message escapes me, but I can reproduce it if need be).
I've tried formatting cache, data, and system, followed by a wipe (or two) on several occasions.
I've also tried flashing various versions of CM9 -- specifically .0.7.0.0 and .3.1. Both give the same result. I've also tried whatever version is in the KitchenSink v2.11 installer. Same result.
My CMW version is the 5.0.2.8. I installed it through RomManager (as opposed to the command prompt on Windows, which I did the first time when it quasi-worked). I've read that using v2 fixes this issue, but I can't find a live copy anywhere, so I haven't been able to try it.
Rather than going for a completely new install every time I bork something, I made a backup just after I finished unlocking and rooting the phone. I just restore that backup after each attempt, and it goes back to working fine on the stock Android firmware (3.whatever).
Any ideas? I think I'll try starting completely from scratch again and not using RomManager tomorrow, but if anyone can point out my error before then and save me a lot of -- hopefully not wasted -- effort, it would be fantastic.
Cheers,
Vash
Click to expand...
Click to collapse
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Well, I got .3.1 working. Then tried to install .7 and it crapped itself again. Should I have cleared all the data/caches/etc. between the two?
Edit - I tried it again but this time cleared all the data between installs. It booted, but I got the same 'android.phone failed to start' message.
Edit 2 - Alright, I think I got it. I didn't clear anything between the two installs, but I installed each firmware twice without exiting recovery mode either time. It seems to be working (phone works, at least), although I'm not sure my 3G is working...
na7q said:
Use this recovery. http://forum.xda-developers.com/showthread.php?t=1218417
Or jokers at http://forum.jokersax.com/discussion/25/joker-recovery-for-the-photon-v3
I use the first link. Works perfect. Once you install the recovery. Wipe everything. Install 0.3.1. Boot into the system. Go back and flash the newest 0.7.0 update with gapps.
Should fix all the issues.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Joker's recovery is a zip file you can flash from 5.0.2.8 if you don't feel like hooking up to the computer and using fastboot. But 5.0.2.8 doesn't work right to flash roms.
Sent from my MB855 using xda app-developers app
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
vash265 said:
Aside from not being able to connect to any 3G networks (which is a problem...), it looks like it's working. Any ideas why 3G doesn't work now?
Thanks for the help thus far =)
Click to expand...
Click to collapse
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Acvice said:
Install 3.1, boot, reboot to recovery, wipe cache and dalvik, install 7.0, install gapps, boot.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
vash265 said:
Yep...already did that and got it to boot just fine. Now I'm struggling with poor reception. I've seen other users (different phones) mention radio upgrades, but I was extremely unfamiliar with the terminology. The phone seems to work okay, but I only get 1x reception for data.
Or were you actually suggesting to repeat the entire process?
Edit - Tried again, still no luck with 3G.
Click to expand...
Click to collapse
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Acvice said:
Before doing what i stated did you wipe everything (system, data, cache, dalvik)? Also, you still getting a forceclose upon boot or just crap signal? And are you on sprint or electrify?
Click to expand...
Click to collapse
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
vash265 said:
I wiped everything. I can boot into the OS and my phone works fine, but my data rate is stuck on 1x (so crap signal). I'm on sprint.
Click to expand...
Click to collapse
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
na7q said:
well did you have 3g on stock? there's no reason it would go to 1x unless 3g is unavailable. the rom shouldn't cause it to go into 1x.
Click to expand...
Click to collapse
Yep. Despite popular belief, I'm not a moron =) I'm in the dead center of 3G availability for Sprint in my area, and with stock android I get perfect 3G reception. I've read reports of the same things happening to other people, but haven't found a solution yet. I restored to stock after making a backup to try updating the PRL. I'll update again when I find out if it worked or not.
Edit - Sprint just sucks, apparently. http://www.sprintusers.com/forum/showthread.php?t=225908
When I rebooted to stock I checked the radio status and sure enough, 1xRTT. Evidently I am a moron =p
There was something wrong with the phone afterall. To fix it, I did the following:
Dial *#*#4636#*#*
You'll be presented with a menu. Go to Phone Information.
About halfway down the page, there will be a menu with a dropdown. Mine was set to CDMA. To fix the issue, I changed it to CDMA auto (PRL). I'm now receiving excellent 3G reception.
*READ BELOW FOR A GUIDE TO FIX*
I've had my note for over a year now and i have had it rooted pretty much the entire time. Never any problems with it up until recently it started doing this thing where it would keep restarting. It would boot up and less than a minute later just restart. Off and on for a few days it was doing this. I was still running 2.3.6 at that point. So i decided to push 4.0.4 via odin since kies didnt support the firmware. Everything was working fine for a few hours then all of the sudden "the ring of death" showing me no service. Went through the phone and noticed it was saying there is no sim inserted. Tested sim on another phone. Works fine. Since then ive figured out via kies i can recovery and update firmware. Tried that. No Bueno. Now im to the point where im on 4.0.4 with no service. I've scoured through forums trying all kinds of different things, pushing different roms and modems via odin and cwm. Still no bueno.
Baseband version
Unknown
Kernel Version
3.0.8
Build Number
IMM76D.UCLF6
If anyone can give me ideas im willing to try them out.
Thanks.
I got it working so heres a direction for anyone else who has this issue!
Replaced Sim&SD card reader-No fix
After flashing all kinds of roms & modems still same issue saying no sim inserted.
Do a hard reset through your settings.
Flash cwm and put the radio from this link on your sd card. Use cwm to flash the radio.
Flash rom http://forum.xda-developers.com/showthread.php?t=2261598 via odin.
The first try i got an error during flash and got stuck on the software download error screen.
Reflashed the JB rom.
After its flashed flash clockwork recovery.
Enter cwm and do a factory reset. Clear cache. Clear dalvik cache. Reboot system.
If you get service, turn off phone. enter cwm and do a backup.
Reboot system.
It should be working.
If not restart and make sure to do a factory reset through your settings in the phone before reflashing rom.
Got the Phone up and running for about 30 mins.
After battery removed it reverted back to no sim card inserted.
Kept reflashing rom until it worked again.
Flashed cwm.(ClockworK recovery mod)
Deleted cache, dalvik cache
Backed up via cwm
If it reverts back to no sim after that restore using the cwm backup.-it worked for me
Now for the tricky part, my phone was getting crappy service...
So heres what i did to fix it.
Settings-more settings-mobile networks-access point names-click on the apn.
Name-
ATT Phone
APN-
Phone
Proxy-
Not set
Port
Not set
User Name-
Not set
Password-
Not set
Server-
Not set
MMSC-
http://mmsc.mobile.att.net
MMS Proxy-
proxy.mobile.att.net
MMS Port-
80
MCC-
310
MNC-
410
Authentication type-
None
APN type-
default,admin,fota,mms,supl,hipri,internet
APN protocol-
IPv4
Enable/disable APN-
(check mark)
Bearer-
Unspecified
Hope this helps anyone else having this issue.
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
440bro said:
I believe I've read something like this before. I think they fixed it by starting over from scratch. Try returning to stock thru Odin. Then root and flash rom of choice.
Click to expand...
Click to collapse
I Started from scratch via "kies emergency recovery".
No luck.
dweeezy said:
I Started from scratch via "kies emergency recovery".
No luck.
Click to expand...
Click to collapse
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Stuck power button. Your pants are too tight.
Theoriginalgiga said:
did you try rolling back to GB? it could be a bad port on your phone. that was my problem.
Click to expand...
Click to collapse
i ordered a new sim port to see if that works. what is gb?
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
dweeezy said:
i ordered a new sim port to see if that works. what is gb?
Click to expand...
Click to collapse
GB stands for Gingerbread which was the first version of the OS that came with the phone. I believe the number was 2.3.6 (you can take a look in the about section in the settings and it'll tell you what you're currently running). ICS is Ice Cream Sandwhich which for our phone was 4.0.4 i believe. Jelly bean just came out today which you can use Kies to upgrade to and that I believe is 4.1.2. The numbers don't really mean a think, just the classification of what the OS is so if your phone reads something else (say 2.3.4) assume your phone is right and I'm wrong. I can't remember OS versions to save my life haha.
But you can use Kies to do an emergency recovery and I THINK it'll install Gingerbread. that's where I'd start, then test it, and then move to ICS and test, and then move to JB and test. I know long tedious process, but sometimes it's necessary. Imagine how fun I am to talk to on the phone while troubleshooting a computer :laugh:
redman9 said:
Same situation...finally went to ATT and had a "new" phone sent under warranty. Of course NOW I'm pulling my hair out trying to migrate everything over to the new phone. I rooted and every ROM I try and install aborts. **** me. I don't even know where to start anymore
Click to expand...
Click to collapse
what I use to migrate, and I between roms at least once a week with a full wipe because I rely on my phone being stable.
SMS and call logs: SMS Backup + (saves your call logs and sms to your gmail account. Makes a label for it and everything, pretty sweet. You can also restore from it. it takes about an hour for me to restore at 7000+ text messages).
pictures/media: stored on SD card
apps: if rooted and rommed I use titanium backup and run 2 sets. those which I want to keep my data like sms backup + to make restore easier and those I don't care about the data like google voice. If you're stock, just remember to check the little box in the beginning saying backup this phone to google (or something like that) and the next time you have to restore tick the box that says restore from google (or something like that) and it'll reinstall your apps. Mind you not the info, but it'll give you a head start.
As with your issue with installing roms. If you're using CWM i highly recommend switching to TWRP, not saying it's better in fact I like CWM better, but TWRP is the best for our roms and phone. If you have no clue what I mean by CWM or TWRP, read the all info sticky about how to rom thy phone.
I hope that helps.
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
redman9 said:
Thanks OG. Yes, I know CMW and TWRP. I used to switch ROMs a lot. Finally stuck with Collective's latest (the orange one) pretty happy with it except that it's major glitch seems to be reboots whenever an app updates. So I figured unchecking auto update in Gstore should handle that.
You're saying I should try rooting w Odin again, install Superuser, then use TWRP to flash with? I'll be happy to read another 4 hrs of posts/stickies if that'll get me sorted out. I don't expect people like yourself to spend your day helping me. I'm very thankful for your tips here.
I've poured thru the "All things Gnote" threads and Noob Guides. They can be confusing as they always link out to many different threads. There is hardly ever a "Here are the steps 1. 2. 3. 4. 5.
Thanks again OG.
Click to expand...
Click to collapse
No problem always happy to help. since you're used to this sorta thing you don't need to use odin again and reroot. What you can do is either install TWRP through CWM using this file here:
http://goo.im/devs/OpenRecovery/sgh-i717/openrecovery-twrp-2.5.0.0-quincyatt.zip
Or you can install Goo manager, click settings and select Install OpenRecoveryScript (though that's only 2.4.4.0 the link above is 2.5.0.0)
That should change you over to TWRP. and like always do a nandroid backup and then flash to your heart's content!
fixed!
dweeezy said:
fixed!
Click to expand...
Click to collapse
How ?
galinha said:
How ?
Click to expand...
Click to collapse
i have the same issue.....i kn0w its n0t an hardware issue....my ph0ne is fairly new never dr0pped and this started happening 3 days after i p0rted black star jb alpha
I have this same issues ive tried flashing everything ive tried a new sim and replaced the card reader.
What works consistently for me if to flash the latest modem everytime i have to reboot or boot the note. Its my daughters phone now and she drains the battery regularly if it boots after charging or it needs to be rebooted for whatever reason it will come up with the no sim card error. If i flash the modem thru recovery it will work for that boot but only as long as I dont reboot or shut the phone off, then i will have to flash the modem again.
Not fixed
All. This is not fixed. I am having the same issue and if you follow the guide, it works for a day maybe regardless of what rom is loaded or what modems. Has anyone found a real solution to this yet??
i717 running stock GB or ICS or JB roms...
Thanks!
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Kraize said:
I have the exact same issue. Replaced the sim/sd card slot and still no dice ): Flashed to stock and back. Nope. Still won't work
Click to expand...
Click to collapse
I'm having the same problem. There seems to be no set way to get it back to working. Basically any reboot of the phone produces a no sim card error. I have tried flashing the modem through recovery as it was mentioned that will fix the problem. That did not work for me. What does work, sometimes, is one of the following:
1. Full wipe and reinstall
2. Restore backup from Recovery
3. Fix permissions
I just keep doing one of the above listed and eventually it works. However if the phone reboots then it's back to the carousel of trying these options to get it back to working.
I'm running Padawan JB V2
I honestly have no idea what's causing it. I haven't tried to fix permissions before to fix this issue, but if I go into recovery and install the modem again and reboot, it works fine for a while (and by a while, I mean like a few hours at max).
Just started having this issue, myself...after flashing Tmo_SGH-T989_VKL1_radio_ATTNOTE.zip modem on my phone...restoring from a prior backup...
Restoring a backup will not change your modem.
I purchased an AT&T SGH-i717 and was told everything worked. When I checked it out, everything seemed fine too. After using it for a couple hours I realized it just seemed to reboot at random. I rebooted into recovery and did a factory reset and wiped the cache. After rebooting it...it would get stuck at the AT&T screen. I then installed the latest stock rom 4.4.2 using Odin and it booted up fine but I got the no sim card error. I put in an AT&T sim card and rebooted but got a sim not provisioned error. I then tried a T-Mobile card and I didn't get the error and it showed signal bars but when I tried to dial it said emergency calls only. I tried a Verizon sim card just to see what kind of error I would get but it was just the same as the T-Mobile sim. I thought it might a corrupted rom so I tried installing the latest nightly CyanogenMod using CWM but got error status 7. I then tried various custom and stock roms including AOKP, BeanStalk, and several different versions of CyanogenMod but always got the same error status 7 msg. I then came across a forum posts stating that CWM no longer works for the SGH-i717. I downloaded the latest TWRP touch recovery and was able install the latest stable CyanogenMod but it would not boot past the animated CyanogenMod logo even after sitting for over an hour. At that point I gave up and decided to just go back to the stock rom. I rebooted into TWRP and the slide to unlock would not work anymore. I had to install CWM using Odin which allowed me to flash back to the stock 4.4.2 rom. After doing another factory reset and wiping the cache then rebooting...the touch screen stopped working. I then flashed it back to the stock 4.0.4 rom but the touch screen still does not work. While trying to figure out what happened I realized the pen still works and touch screen buttons on the bottom but thats it. Also the pen only works on the screen and not on the touch screen buttons. I've been messing with this for 3 days and will probably just sell it for parts but wanted to post this problem so if anyone else had this problem they would know what I've already tried. I did also take apart the phone and clean the connections but that didn't help either.
If anyone has a suggestion for something I haven't tried...please let me know. My last attempt will be install the Padawan JB rom from this post:
http://forum.xda-developers.com/showthread.php?t=1907203
Thanks
Right out of tge gate, there is no stock 4.4.2 for this device. Not official anyway. 4.1.2 is official OS.
Status 7 means your recovery needs updating.
CWM does work and the newest CWM touch is just dandy.
I would try going all the way back. You need to be totally clean.
Factory
Cache
Davlik
Format
Go to Kies and go with emergency firmware recovery.
Get back to stock and see what is working.
Clean clean clean, the best way for anyone to help you. You would be at the best starting point.
Maybe do a little reading as many of your issues have been documented and solved. None of them are major.
Start from scratch and folks can get you running again.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
Right out of tge gate, there is no stock 4.4.2 for this device. Not official anyway. 4.1.2 is official OS.
Status 7 means your recovery needs updating.
CWM does work and the newest CWM touch is just dandy.
I would try going all the way back. You need to be totally clean.
Factory
Cache
Davlik
Format
Go to Kies and go with emergency firmware recovery.
Get back to stock and see what is working.
Clean clean clean, the best way for anyone to help you. You would be at the best starting point.
Maybe do a little reading as many of your issues have been documented and solved. None of them are major.
Start from scratch and folks can get you running again.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
cycloneus said:
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
Click to expand...
Click to collapse
well my friend, you had the phone apart once already, I am no expert, but my guess is this is no software issue. maybe some connections came loose. in my time here, I have not come across this issue. I do not have the brain pan nor the courage to take my phone apart.
good luck to you.
maybe someone else will mosey on by.
cycloneus said:
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
Click to expand...
Click to collapse
My guess is the digitizer has gone bad if odin &/or kies can't fix the issue at hand.
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Noypi14 said:
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Click to expand...
Click to collapse
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
es0tericcha0s said:
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
Click to expand...
Click to collapse
Thanks for your reply.
The current cyanogenmod is fine although i prefer the virgin rom. but i can go back to virgin once the problems have been rectified.
I agree that the signal issue has something to do with the modem so i tried different modems using odin but the XXUBMEA wouldnt change despite trying several modems and several times.
The phone is on three network (uk) with its current baseband 19505XXUBMEA.
The official rom i tried was on 4.3 and kies said it was the latest
Thanks again
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
es0tericcha0s said:
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
Click to expand...
Click to collapse
Thanks again for replying.
What i havent actually tried (which i'm reading at the moment) is the formatting of data under the advanced options on twrp. I dunno if it will make a difference say i try a new rom. I don't mind trying and starting from scratch. Like format data then install a new rom. Do u think this will make a difference? (will this be similar to formatting a dard drive on a pc before installing windows?)
What i suspect is there is nothing wrong with the roms i've tried but something in the installation got messed up and remains there even after wiping the data.
I think i have tried doing it twice only to find out that it didnt change the modem despite odin saying pass.
Should i format data then install a fresh rom?
Hard
but challeng refused
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
es0tericcha0s said:
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
Click to expand...
Click to collapse
Noypi14 said:
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
Click to expand...
Click to collapse
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
es0tericcha0s said:
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
Click to expand...
Click to collapse
thanks again for your interest.
the issue about the modem is somehow clear. thanks for clearing that up.
i think it is better to tackle the problems i have in my current setup rather than the previous problems. so, as previously mentioned, i am on cyanogenmod 11 (on 4.4.2). here are some of the problems i am aware of or rather, those that i have experienced:
1. calls - whenever i dial a number, the screen goes black as if the phone is next to my ear (could there be something wrong with the proximity sensor? i haven't done anything to rectify this yet though. when this happens, i can't do anything as the seems to hang although i could see the call timer working. during that call however, i can't hear a sound nor the person i just rang. same thing happens when someone calls me. my phone vibrates (because there is another problem with the sound which i will discuss next) and when i answer it, i hear no sound and the screen goes black and i couldn't do anything with the phone. i have to wait till the caller disconnects before the phone becomes useable again.
i tried calling using viber and the same thing happens.
2. sound - phone is muted even though all the volume controls are midway or almost 100%. i tried changing the ringing tone but i don't hear any sound at all. normally, when i switch to a different ringtone, it should give me a preview of what the chosen sound is like.
3. videos - it doesn't work. when i go to youtube, it opens up the site, opens the selected youtube clip, tries to play it but pauses then tries to play again then pauses until i get a message saying "there was a problem while playing. touch to retry."
so far these are the problems i have faced.
sorry for the long post again.
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
es0tericcha0s said:
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
Click to expand...
Click to collapse
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Noypi14 said:
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Click to expand...
Click to collapse
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
es0tericcha0s said:
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
Click to expand...
Click to collapse
I put the screen protector when i got the phone and i don't see any visible dirt so i wouldn't want to blame it either. Although i did read about the screen protectors causing problems. But the thing is, even youtube or any videos do not play. Even any sound.
I've tried the slimkat rom by following the developers' instructions and still no youtube, no sound, can't make a call as i can't hear the person i'm calling nor can that person hear me.
Any other suggestions on what to do? I don't mind going back to stock as long as i get all the features back. I went to official 4.3 before but had more severe issues. Or perhaps i did it wrong?
Thanks..
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
es0tericcha0s said:
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
Click to expand...
Click to collapse
Thanks.
Got hold of the official 4.4.2 and flashed it via odin. Failed. But tried again and now working fine. Sound is back, video is back as well as calls. Just the annoying google search failing all the time.
The baseband it has is I9505XXUFNC9. i didn't install any modem in odin though. Just flashed in the pda section the tar file
Now i don't know whether to root this again and try custom roms or leave it as it is. I saw knox by the way but haven't installed it. Or is it pre installed? I have little knowledge about knox