Hey guys....
Appreciate any advise any one can give me or share
I flashed my GS2 a while ago with a beta version of ICS however found numerous bugs with it that started annoying me so decided to put the latest gingerbread firmware back on.
I found the latest firmware version from my service provider on sams firmware.
Downloaded the firmware
Used ODIN3 v1.85
Left default options (Auto Reboot and F. Reset Time)
Loaded the firmware .tar file as PDA
Booted device into download mode
Started the firmware flash from ODIN
Everything went through fine, received "PASS" and device rebooted.
When the device comes back on the android wizard comes up but as soon as I try to start the setup wizard i start receiving the follow error messages:
"Sorry!"
"The application Software update (process com.wssynccmldm) has stopped unexpectedly. Please try again"
"FORCE CLOSE"
If i select Force Close
The next message is the same but says Google Services Framework stopped..
Each time i select "Force Close"
These messages keep appearing not allowing me to complete the setup wizard.
I have also tried a different firmware GB 4.3.6 which has exactly the same issue.
Any ideas guys?
I am desperate and lacking sleep now....
Get to recovery .factory reset .data wipe . Advanced >dalvik cashe wipe. Flash the from again.
Sent from my GT-I9100 using XDA
Turn off the phone .. n press volume up+home+ power u ll go to recovery and format data cache and reboot.
There was no need to create a thread for this.
Sent from my GT-I9100 using Tapatalk 2 Beta-5
you guys are awsome thankyou so much!!!
worked a treat!
Related
Hi ,
I tried to install as stated in the thread
http://forum.xda-developers.com/showthread.php?t=947613
i followed all the steps as said and i rebooted after installing from SDcard through xRecovery.
the system booted with SE logo and with CM 6 logo after a while i got error "The process com.google.process.gapps has stopped unexpectedly. Please try again" with force close button. if i click force close the same error msg repeats again and again and end up with this error "Process.system is not responding".
I am not able to user SEUS.
Kindly help on this. Not able to turn off the mobile using power button. i turn it off by removing battery. the phone restarts if i insert the battery and end up with same error.
Did u wipe phone, all caches and battery stats before flashing the ROM? if not, that could b ur issue. U should that what i said and try reflashing the phone. U could of also had a bad flash. Try that or if that doesnt work, use flashtool from x10 android development section. Post what ur plan is.
Whats the baseband number u have currently on phone?
Sent from XDA Premium from my X10a rooted running 2.2.1 CM Rom from Rendeiro2005
Thankyou so much i fixed the same issue
i had the same issue when restore a backup after test another custom firmware. but in my case i lost GMS network , so i tried to restore my backup a lot of times but nothing. Until i saw unknow on bb info and i reinstalled bb .54 with Flashtool .. .and it worked ... so if you dont tried this, maybe it can resolve it
bad english sorry... google
"the process com.android.phone has stopped unexpectedly" loop after installing CM7
Hey.
CM7 doesn't work for me... I keep getting this error message in loop every like 2-3 seconds.
I came across that page: http://code.google.com/p/cyanogenmod/issues/detail?id=2928. Tried to do as comment 97 says (i'm on another rom right now), so i downloaded sqlite and put my phone on airplane mod, but when I get into settings.db all I find is a line of "null" and I get stuck.
any suggestions? I really want CM7 to work on my phone!
Did you wipe before flashing?
Note, you should ask this question in the Q&A from Cyanogenmod.
Yes, full wipe (the all three).
And you mean to ask this in cyanogenmod forum also?
Help someone...?
Ask in the relevant rom thread makes sense .
Or factory reset .
jje
try "fix permissions" (rom manager)??
i was having the same problem-'com.android.phone has stopped unexpectedly'
i opened ROM Manager in CM7 and clicked on 'Fix Permissions"..............
it worked for me..!!
Just received this error
I had the same problem after restoring data from titanium back up. I installed CM9 on defy+ and on rebooting after the data restore. The phone started showing this error and kept rebooting.
What I've done:
> Kept the mobile in flight mode
> Opened app settings of "Phone" and cleared data and turned off airplane mode
No success! The phone kept rebooting
Then I opened titanium backup and wiped data of that app and turned off flight mode.
I din receive the error again
defypls said:
I installed CM9 on defy+ and on rebooting after the data restore. The phone started showing this error and kept rebooting.
Click to expand...
Click to collapse
This forum is for the I9100, and this irrelevant thread you bumped hasn't had a post in six months.
Oops! Sorry about that. I din even notice its galaxy forum.. I was having same prob and kinda solved it myself while looking for solution. So posted it.
Sent from my MB526 using XDA
usually the prblm comes frm titanium bck wen restored wiv sys apps.the best way to avoid such prblm is install apps one by one.or do a clean wipe
Error Message S3
"the application phone process com.android.phone has stopped unexpectedly please try again.
What does this mean and how to solve it . i do not know any programming or other stuff.. please guide me step by step.
or post a usefull link for me .. Thankss
Hi Al,
Yesterday after update (Settings\About\Check for update) I'm not able to access settings screen, I have done factory reset twice already but it is still the same.
I'm not able to connect to the Kies, because I believe USB debugging is on, and I cannot turn it off because I can't get to settings. So my PC not recognizing phone now, so any update is impossible. Phone have never been rooted and it is Vodafone UK.
The fault: The application com.android.settings (process com.android.settings) has stopped unexpectedly. Please try again
Any ideas how to resolved without sending to service?
Thanks for any help
whistlerek said:
Hi Al,
Yesterday after update (Settings\About\Check for update) I'm not able to access settings screen, I have done factory reset twice already but it is still the same.
I'm not able to connect to the Kies, because I believe USB debugging is on, and I cannot turn it off because I can't get to settings. So my PC not recognizing phone now, so any update is impossible. Phone have never been rooted and it is Vodafone UK.
The fault: The application com.android.settings (process com.android.settings) has stopped unexpectedly. Please try again
Any ideas how to resolved without sending to service?
Thanks for any help
Click to expand...
Click to collapse
So, you can start recovery mode, as you said that you have done factory reset twice.
I think that download mode (Volume DOWN + Home + Power, then Volume UP for proceeding) will work too.
I suggest to flash stock ROM (as you want to connect to KIES) to your phone.
If you have not done it so far, please have a look at Intratech's Official Firmware thread => http://forum.xda-developers.com/showthread.php?t=1075278
In the first post, he described the procedure very detailed and understandable IMO.
You can download latest official ROM from the second post or a Frankenstein ROM (is nearly the same as the official / stock ROM, but prepared for combining with any Modem and/or CSC files) from the third post.
I prefer Frankenstein ROMs.
Nearly every ROM in Intratech's thread is non-wipe.
Download and install Odin.
Put the downloaded ROM (extract it with 7zip will result in a tar or md5 file) into PDA section of Odin connect your phone started in download mode to the PC.
Wait for all phone drivers to become active (make sure that KIES is no longer running), and a yellow box will be shown in Odin.
Then just Start flashing the new ROM to your phone.
Once you have done it this way, you won't use KIES any more.
Good luck !
I did exactly as you said and Is working perfectly. I like it some much, so I decided to rooted and flashed with CyanogenMod, also went smothly, without any problmes.
Thanks again!
settings stopped working
I also have had the same problem after the latest update. I discovered yesterday , that if I disabled the blue tooth function, the settings stated working. I have repeatedly tried this, and it so far works everytime. When I turn the bluetooth back on, I again get the error message.
Hello, I rooted my Note 4 about 2 years ago and never installed any custom ROM nor have I installed a custom recovery. It had been android 5.0.1. Recently, I decided to unroot and finally update it to 6.0.1. I then used ODIN and flashed the official firmware on sammobile. Everything went well with ODIN and the flash was complete. However, once my device rebooted, there was an error where it says "Device does not have DRK, please install DRK first..." and then there was an "error" in the middle of the screen. After 10 min, I removed the battery and manually reset the phone. Once my Note 4 booted back up, everything seemed fine, but i had this constant "unfortunately cloud agent has stopped" msg. Also, I noticed each time I opened the Gallery app, it would crash and the same "unfortunately cloud agent has stopped" would pop up. I tried to force stop the CloudAgent and gallery in my application manager but the issue continued to persist. When I would go into the settings under application settings, simply by clicking the gallery option will crash the settings app. Even my camera app would crash and have the same msg when I click the gallery preview on the bottom right. I read online that it was an issue with dropbox, but nothing changed. Finally, I decided to factory reset and wipe the cache partition my phone through recovery. I then noticed both DRK and Dm-Verity Verification Failed msg in red on the bottm of the recovery menu. Restarted the phone and everything seemed fine until I noticed the "unfortunately cloud agent has stopped" msg again. Not only that, when I try to turn NFC down in the setting, the setting app itself would crash. Tried factory resetting the phone a couple of time but the issues were still there. I also noticed that each time that I would reset my phone, there was the "Android is starting..." green screen that appears as if I was doing updating my phone. I tried re-installing the firmware with ODIN again, but I still had the same issues. I tried using smart switch to re-install the firmware but once i get my phone in download mode, Smart Swtich cant recognize my phone. Here we are now, I can use my phone, but I cant open the gallery app to see my photos, I cant turn off nfc in the settings, I have both DRK and Dm-Verity Verification Failed msg in recovery and I get the green Android is starting screen every time I restart the phone. Any help would be a miracle xD
I forgot to mention this, but before flashing the firmware, I forgot to reinstall some bloatware/Samsung apps that came with the, it might be related. I did back them up with titanium backup tho.
Some specs:
SM-N910W8 (Bell), I unlocked it and use it with Fido
Android 6.1.1
I'm having a strange issue after flashing latest firmware on my Tab S7 (SM-T870)...
When I try to flash an update with odin I'm using "HOME_CSC" as I want to keep the data on the device. However it results in a boot loop to recovery where I have 3 options
1. Restart the phone
2. Factory reset
3. Check logs
Restarting the phone just restarts it and boots to the same menu.
I've checked the logs and saw an error saying:
Unable to set property "ro.boottime.init.mount.cache"
I've tried wiping cache in recovery as well, but that didn't help.
Anyone here who can help me out?
Thanks!
Lif3mau5 said:
I'm having a strange issue after flashing latest firmware on my Tab S7 (SM-T870)...
When I try to flash an update with odin I'm using "HOME_CSC" as I want to keep the data on the device. However it results in a boot loop to recovery where I have 3 options
1. Restart the phone
2. Factory reset
3. Check logs
Restarting the phone just restarts it and boots to the same menu.
I've checked the logs and saw an error saying:
Unable to set property "ro.boottime.init.mount.cache"
I've tried wiping cache in recovery as well, but that didn't help.
Anyone here who can help me out?
Thanks!
Click to expand...
Click to collapse
Maybe try to reflash previous firmware version.
There is no need to run after the lastest update.
Vntnox said:
Maybe try to reflash previous firmware version.
There is no need to run after the lastest update.
Click to expand...
Click to collapse
No I tried it but only factory reset does help -.-
This is why I hate Samsung for Security reasons after a f***ing Update ...
I have the same problem, but i didn't update from Odin.
Just OTA september update, and the phone randomly goes in bootloop like once in a week.
Same here. Does anyone have any news?
same here. im in a bootloop and not even factory reset helps. i can access recovery and download mode and have flashed newest firmware three times via Odin with "pass," wiped cache, name it i've done it. I'm despondent. Does
Samsung not have the equivalent of Oneplus's MSM tool? four days have i worked furiously to save my phone.
sorry to revive, but I'm having this issue as well on my z fold 4.
Factory reset helped for about a week, and back to bootloops every 3 min or so.
PASS received in Odin, had to use micro usb cable with C-adapter as c->c did not allow Odin to complete flash (stuck at ~95% on "Super").
Not sure which error in the logs apply, but the "unable to set property "ro.boottime.init.mount.cache" to "0": error code: 0xb, try count 1-3" seem to be cause for alarm.
Has anyone fixed this?