I first perform a Unroot and unlocker to the next post http://forum.xda-developers.com/showthread.php?t=1216143, install and probe the CM9, as had some bugs, try to recovery the original version with the next post http://forum.xda-developers.com/showpost.php?p=20331623&postcount=6 , now when I turn the phone is giving the MOTO logo and restarts.
I tried installing with the RSD Lite 154_5 or 198_7 versions but does not work.
I can do in this case.
Goto Android recovery and do a factory reset, that should solve the issue.
rishie said:
Goto Android recovery and do a factory reset, that should solve the issue.
Click to expand...
Click to collapse
Thanks, this worked ..
Related
I recently got a galaxy player 5 international with froyo. I rooted it with no problems, but when I tried to flash a kernel with cwm recovery it would get stuck in a boot loop unless i went into the cwm recovery mode. I noticed that the kernel I used, rumirand's r14, was based off of GB and thought that might be my problem. I tried updating my firmware to GB using WT Ho's custom rom, and now it just hangs on the samsung logo, but I can still get into cwm. I made sure to wipe both caches and wipe data before installing the rom. Is this fixable or have I turned it into an expensive paperweight?
Did you try a factory reset?
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Chris4evernoob said:
Did you try a factory reset?
Click to expand...
Click to collapse
Now or before installing the rom? I did a factory reset before installing, but I haven't done one since.
DZonikg said:
I am not expert but i tried the same with R14 kernel and bricked but done the same with R13 and it worked .
Click to expand...
Click to collapse
I just flashed the R13 kernel, but I'm still in the same situation.
Instead of flashing a new kernel there should be factory reset option on the first set you have or in "mounts and storage"
I had this problem once and I managed to solve it flashing a full rom (like 2.3.5 rooted and with rj kernel). It seems some users are having problems when flashing only the kernel. After you solve the problem, flash back group rom.
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
jnmaster said:
I just tried the rom+kernel. It said it was successful but it must not have been because it was hanging on boot again, and now it won't respond to the power button. If I plug it in to the computer it gets an image of a battery turns off and repeats.
Click to expand...
Click to collapse
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
WT Ho said:
Can you go back to CWM after flashing rom+kernel? If yes, usually it is a matter of wiping the data and Dalvik cache. Which ROM+Kernel did you flashed?
Click to expand...
Click to collapse
No, I'm not able to get a response from the power button.
I used the ROM + kernel you posted http://forum.xda-developers.com/showthread.php?t=1446774
Hi everyone, i show you my problem, yesterday i was installing the ics leak rom from T-mobile, at first time installation proceding fine, but multimedia apps didn't works, i tryed to re-flash by doing a second flash of update.zip by the recovery, but now the razr didn't start, he show only the logo M, after a black screen. I can go to the Flashboot, recovery the boot option.
I tried the Wipe cache, Wipe Data/Factory reset but nothing working.
I think that reflash via RSDlite or FlashlT with a ICS rom, the leak will solve this problem ?
Can everyone help me with this big problem ?
Thanks
There's an Thread in General section about saving a bricked Device after the Leak. I'm to lazy to post the Link now
I think I have messed up, I just flashed to the Cyanogen 7.2 Rom, it flashed ok and the phone works. But so far I have a few problems, I am not unable to answer calls. When it rings, I need to unlock the phone, manually go into the phone app in order to do so.
I am also missing the notification bar.... I can't see it anywhere.
Another problem is I can no longer access the phone when connected to the computer as it does not have the option to allow me to use as usb mass storage any more. When it is plugged in pc will pick it up but the drive is greyed out.
Please help.
Regards
just do a factory reset (in the first menu), than flash again and don't forget to wipe cache partitation and dalvik cache, fix permissions aswell to be sure. If that does not work you can go with the QDL-tool. It almost impossible to completely brick your phone due to software, as only the -w command in fastboot could do that but it would not even boot in that situation...
Vennesch said:
just do a factory reset (in the first menu), than flash again and don't forget to wipe cache partitation and dalvik cache, fix permissions aswell to be sure. If that does not work you can go with the QDL-tool. It almost impossible to completely brick your phone due to software, as only the -w command in fastboot could do that but it would not even boot in that situation...
Click to expand...
Click to collapse
Which of the first menu are you refering to? I am confused....
I have now entered recovery and just done a factory reset, let see what happens
1) Go into StreakMod and do a factory reset.
2) Go into the main recovery menu and do a factory reset.
Sent from my Dell Streak using Tapatalk 2
Edrill said:
1) Go into StreakMod and do a factory reset.
2) Go into the main recovery menu and do a factory reset.
Sent from my Dell Streak using Tapatalk 2
Click to expand...
Click to collapse
I did that by going into recovery then I did a factory reset, after that it will just loop at the boot up screen. I had to take the battery out as it was hung for like 20mins. Now it's bricked and it won't even boot back up....
:crying:
Both should not brick anything. Try to enter the recovery again and do the factory reset (the first one now), and flash again. If it does not work get a fresh install by doing the QDL-tool all the information is on the forum.
Vennesch said:
Both should not brick anything. Try to enter the recovery again and do the factory reset (the first one now), and flash again. If it does not work get a fresh install by doing the QDL-tool all the information is on the forum.
Click to expand...
Click to collapse
in this case you dont need to use qdl tool... just streakmod recovery...
install either dsc 1.0 or longhorn 2.7 and see if it helps... everything should work fine with those two rom...
once it works... install kernel test 3... but be sure to install the correct kernel.... dsc, its own kernel... longhorn, cm7 kernel... and then fastboot 366 baseband for better voice, mic and telco cell reception quality
Not able to boot into system
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
shreyanshbengani92 said:
Hi,
i was using baidu rom from quite some time. today while rebooting mistakenly instead of selecting the reebot i selected the recovery option and now i am not able to boot into my system every timei switch on my phone the cwm recovery is opening. i have tried to reinstall the same rom and the others as well but nothing is helping. ihave even tried the backup of saved past rom but still nothing is happening.
please help me..
Click to expand...
Click to collapse
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
akky26 said:
DO THIS
1. before re flashing the baidu rom do clear cache/ factory reset and wipe partition.
If it still doesn't works then
2. download an official firmware and flash it via odin, then re-root your device and flash baidu rom. It work work 100%
Let me know for any further assistance
Click to expand...
Click to collapse
Thanks a lot for your help
Flashing rom didn't helped but i just flashed cwm again and my problem was solved.
Please help!
The phone is not rooted and is fully stock. It was working just fine last night but in the morning, the phone was stuck in eRecovery.
I tried downloading the latest version and recovery from the given options but it displays the message 'Getting package info failed' (It connects to the home WI-FI)
I have not backed up the phone in a months time so is there any way to recover the data before performing a factory reset?
Any help would be greatly appreciated...
Aren't you able to boot normally now?
Try if it boots to recovery or fastboot
From there try as
Fastboot reboot.
Or in recovery, try clearing cache only and boot.
If all above fails, just dload the current firmware you had.
shashank1320 said:
Aren't you able to boot normally now?
Try if it boots to recovery or fastboot
From there try as
Fastboot reboot.
Or in recovery, try clearing cache only and boot.
If all above fails, just dload the current firmware you had.
Click to expand...
Click to collapse
It doesn't boot up. When the phone is turned on, it goes to recovery...
I'll try to fastboot reboot
I cleared cache, no luck
I'll check how to dload and see if it works
Sorry to hear you that. Another member and I got hit by it as well. Unfortunately a hard reset was the only solution to solve it.
Maybe you'd have better luck that us.
The discussion was here https://forum.xda-developers.com/mate-10/help/mate-10-pro-bootloop-official-update-t3934740
Cheers.
tgmuneer said:
Sorry to hear you that. Another member and I got hit by it as well. Unfortunately a hard reset was the only solution to solve it.
Maybe you'd have better luck that us.
The discussion was here https://forum.xda-developers.com/mate-10/help/mate-10-pro-bootloop-official-update-t3934740
Cheers.
Click to expand...
Click to collapse
Seems like I'd have to do the same...
Thank you for directing me to the post
edirisinghe30 said:
Seems like I'd have to do the same...
Thank you for directing me to the post
Click to expand...
Click to collapse
No worries.
Cheers
hello there , my device Huawei Mate 10 Lite suddenly restarts this morning and now stucks in Recovery Mode. I'e tried every option like downloading the latest version and recovery. It successfully downloads and installs, but still stuck in recovery . I've tried hard reset option and wipe cache partition also but still the issue is same. "Stucks in recovery". Can any one please tell me the solution ???
Immad9555 said:
hello there , my device Huawei Mate 10 Lite suddenly restarts this morning and now stucks in Recovery Mode. I'e tried every option like downloading the latest version and recovery. It successfully downloads and installs, but still stuck in recovery . I've tried hard reset option and wipe cache partition also but still the issue is same. "Stucks in recovery". Can any one please tell me the solution ???
Click to expand...
Click to collapse
What did you do in the first place, for it to be stuck in recovery?
Hayeni said:
What did you do in the first place, for it to be stuck in recovery?
Click to expand...
Click to collapse
i didn't do anything. I was on a whatsapp call and phone suddenly reboots, after rebooting it was in recovery mode directly.
Immad9555 said:
i didn't do anything. I was on a whatsapp call and phone suddenly reboots, after rebooting it was in recovery mode directly.
Click to expand...
Click to collapse
can you suggest any solution ?
---------- Post added at 01:51 PM ---------- Previous post was at 01:49 PM ----------
edirisinghe30 said:
It doesn't boot up. When the phone is turned on, it goes to recovery...
I'll try to fastboot reboot
I cleared cache, no luck
I'll check how to dload and see if it works
Click to expand...
Click to collapse
is your problem solved, regarding mate 10 lite stucks in recovery ? if yes, do tell me the solution you used ....