Morning guys - i'm a sort of noob (go easy.!) that needs help with my HTC desire. I took plunge and decided to try rooting & applying custom ROM, but now have problems with the screen freezing completely at any point, then on restart the phone boots into the home launcher but screen does not respond or will not wake.
So far:
Rooted with unrevoked
HBOOT flashed to Cm7r2
Latest version of clockworkmod recovery via app
Aurora 4.1 (all dalvik caches wiped at correct points).
V6 supercharger applied on setting 5 (balanced).
Tried with kernel built in ROM (0.7) & gingercakes 0.9cfs no2way havs.
SD card partitioned with GParted (fat32 primary, 2gb primary ext4).
I've had the ROM working fine, the only other thing i can place it to is swapping the SD card, which i've changed from 4gb class to, to a samsung 16gb class 6. Does anyone think that this error could be anyway caused by the fact the card readers i've used (tried 2 different readers) both have had trouble recognising the 16gb card?? (Gparted still recognised it however)
Is it possible to be a hardware issue? Please note recovery works perfectly - wiping caches, reinstalling zip files, backups etc.....only problem is now this freezing of home launcher and no response.
Any help be greatly appreciated, give me a nudge if i haven't given enough detail.
Regards, Nick.!
Additional:- Tried unsupercharging & rebooting - no difference.
Only other thing i can think that i've done prior to the fault is attempting to install busybox for V6 supercharger - which failed every time and affected my root access on the phone. I've found that the Aurora ROM has busybox installed already. However, is it possible me trying that install has somehow affected the rooting of the phone?
So many questions, sorry guys!
Bump.....would ADAO file manager (which isn't on google market I notice) affect anything on ext4 perhaps? That was one app that i downloaded from net.
Have you tried reverting your busybox to the default version? Also, are you overclocking and or overclocking? Going to high or to low with CPU speed can cause problems like that. It has also been said that partitioning an SD card can damage them, which may be an issue you have now. You could try formatting the SD card to its default state and run like that for a while. I ran a 16gb SD card in a Droid Eris for months and it never caused a problem like that. Of course, I didn't have a partition set up on it.
Sent from my ADR6350 using Tapatalk
I've literally left the settings for speed in daemon controller alone, although i'm still learning and not sure if they are default overclocked or not?
Possibility with the SD card, i'll give it a try for sure, that'd mean i'd have to revert to an alternate ROM would it, as Aurora specifies an ext4 partition?
Thanks again though, it's a start at least
Do you set profiles in SET CPU?
Accidentally sent from my Google Nexus S using XDA Premium
Excuse noobie brain here, where will i find those CPU settings?
If so, fully wipe and install again. And what rom are you using currently that causes freeze?
Accidentally sent from my Google Nexus S using XDA Premium
Aurora V4.1 ROM i'm using. Don't think it's the ROM itself as i have had it stable for week or so, before swapping SD card from 4gb to 16gb.
I'm thinking this may be the root cause as i've just tried a complete fresh partition with Gparted & fresh install of literally just the ROM itself and on first boot it froze again. Rebooted and now seems to be stable with nothing reloaded back on it but we'll wait and see. If it freezes again i'll try my 4gb card. Didn't want to revert back to that as its only class 2.
[Q] Noob help - Rooted desire keeps freezing.! Update...!
UPDATED - Still getting same problems - have now tried a different SD card & alternative ROM (Cool3d v5).
Is it possible it could be heat related fault? The more i use the phone the more readily it happens - from the occasional freeze (okay after reboot) to complete freeze and no response on every reboot.
Does the CPU therefore have a cut out or could be freezing based on the settings that are initially loaded through daemon controller? What are safe settings for the min/max values?
Only other thing i've noticed is once fault starts to occur - clearing dalvik cache in recovery is quite unresponsive - menu holds before allowing me to clear.
Got to get to the bottom of this - don't want to revert back to original, or throw my phone in the river!!
Save clock is 1ghz. No over clock is the safest.
Do your phone wear case? If yes, it may be the caused of heat.
I'm sure the rom caused you the freeze. You can try to change a more stabler rom, eg aosp
Accidentally sent from my Google Nexus S using XDA Premium
Bit more progress - as my phone literally would freeze on loading home launcher, i connected it to pc and mounted via recovery - and deleted everything i could see for V6 SUPERCHARGER - and hey presto, very slowly, but phone booted up and is now working again.
I see the devs of V6 say about removing hardtokill if any lags occur - i think it's this portion of the script affecting my bravo.
SO, i'm going to run it totally without V6, and may try to just run the memory portion, but the instructions to disable hardtokill are a little unclear to me, could you guys tell me in simple terms how to acheive??
Thanks again for all your responses, a great help
V6 now off and all fresh re-installed with cpu max turned down also, and set to ondemand gov, will see how we go
[Q] Noob help - Rooted desire keeps freezing.! PT3.!
Still no joy with this issue guys - pulling my hair out now - after a few hours use (usually overnight) phone just freezes, then freezes on reboot, before getting worse and now will not pass alpharev's boot screen.
Installing fresh gets me into home launcher, but becomes unresponsive and freezes again.
I've tried different ROM's, different SD's, basic clean install, all without any luck. I'm thinking now it is more a hardware issue with the phone?
nikh667 said:
basic clean install
Click to expand...
Click to collapse
Did you wipe data/cache partitions/dalvik cache before flashing the rom? Did you wipe dalvik cache and cache partitions after flashing the rom?
Yep all wiped before and after.
nikh667 said:
Yep all wiped before and after.
Click to expand...
Click to collapse
Have you tried flashing a new kernel?
Yep fault happens with any kernel I've tried (so far 0.9c no2way havs cfs, also 2way version, 0.8f cfs havs, 0.7c)
nikh667 said:
Yep fault happens with any kernel I've tried (so far 0.9c no2way havs cfs, also 2way version, 0.8f cfs havs, 0.7c)
Click to expand...
Click to collapse
Has your device went through any physical damage (around the time the problem started)?
No physical damage apart from the battery cover being pulled off more than once(!) and a lot of obscenities being flung it's way, lol! But no, not dropped or damaged at all.
I've used the phone now all afternoon, longer than normally, with the same details on same hboot, but left some of the sense widgets off the home launcher, and it hasn't locked up once.
Hi, I was looking forward to install Aura ROM on my Atrix 4G. First of all, I was wondering if I can ask a few questions about how the phone will perform with the upgrade.
a). Mi first question is. ¿Will Aura ROM + 1.3Ghz faux Kernel improve my battery life?. Because my battery is lasting just 12 hs-14hs with only 1 hr of wifi / chatting / media / 3G usage. Will the overclock reduce my battery life? or does Aura come optimized to perform better than the stock phone?. If I set a kernel that uses stock speeds I would get a better battery life?.
b). Is the WebTop hack compatible with Aura ROM?.
c). Can I restore my previous configuration and apps by using titanium backup?.
d). Will my phone recognize ext4 formated sdcard?. And if not, is there a way to do it (I would like to have the possibility to carry files larger than 4GB)
e). Blurred edition comes with all the stock apps Am I right?.
Thanks !!
Regards.
gonzas144 said:
Hi, I was looking forward to install Aura ROM on my Atrix 4G. First of all, I was wondering if I can ask a few questions about how the phone will perform with the upgrade.
Click to expand...
Click to collapse
>a). Mi first question is. ¿Will Aura ROM + 1.3Ghz faux Kernel improve my >battery life?. Because my battery is lasting just 12 hs-14hs with only 1 hr of >wifi / chatting / media / 3G usage. Will the overclock reduce my battery life? >or does Aura come optimized to perform better than the stock phone?. If I >set a kernel that uses stock speeds I would get a better battery life?.
I am running the latest faux 1.3 kernel and have not noticed much difference in battery life. Try it and see what you get. Very easy to flash kernel back if you need to. However be aware that changing the rom to Aura (or any other rom) most likely will affect your battery life- You will need to optimize it for your new rom. Do a search for the procedure.
>b). Is the WebTop hack compatible with Aura ROM?.
What do you mean by Webtop Hack? Standard Webtop, Full Debian Mod, Webtop2sd? If Aura does not come with the Webtop, you can flash it with the Fruitcake Addon. And I believe Aura works with all of the other 2 Webtop "Hacks" I am about to flash Aura because I am running Darkside 4.2 and I cannot get Webtop2sd running with it.
>c). Can I restore my previous configuration and apps by using titanium >backup?.
It should. However this is where you need to spend some time and research if you want to make sure you do it right so that you do not lose all of your stuff. Store to your external Sdcard and you can copy it off to your PC
>d). Will my phone recognize ext4 formated sdcard?. And if not, is there a >way to do it (I would like to have the possibility to carry files larger than >4GB)
I know that the the latest Faux Kernels enable Ext4, but I do not believe android can make use of it yet. I think it is still Ext3. Not too sure about this though. You might need to do a little more research on this.
>e). Blurred edition comes with all the stock apps Am I right?.
Yes it should come with all of the standard Motoblur apps. And if you do change your Rom to Aura, Kernel to Faux, etc get ready to have a few sleepless nights flashing it many times to get it just right. Of course that is the fun of doing it, right?
Hi,
Thanks for the complete reply. Im on vacations now so having sleepless nights trying to flash my phone isn't an issue. .
About ext4 format, if its not compatible with Android, but Android supports ext3 (as you said in your reply), its fine, because ext3 supports files bigger than 4GB (4TB is the maximum size).
Again, thanks for your help, very useful.
CyanogenMod 10.2 for P768
CM 10.2 has reach state. So I update this rom and I'm moving my CM repo to CM 11 now.
This is an unofficial CM 10.2 build from source with original omap kernel (3.0.31-CM+). Please flash at your own risk. I've tested on my P768f so it should work on all L9 P768 phone.
Only for P768 phone with Unlocked bootloader!
Camera & Gallery don't work without sdcard, please flash sdcard emulate patch to fix it
Click to expand...
Click to collapse
Features
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3.1
Swap internal/external sdcard / Disable sdcard emulate / Emulate sdcard via Aroma installer option
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard). <-- Don't add this fix, so don't bother with ICS UMS mount dialog.
How to install
Download rom and put it in sdcard.
Download Google Apps for CM10.2 and put it in sdcard.
Boot into recovery and Clear cache, dalvik cache and format /system. (Full wipe is recommended but not required if you came from CM 10.2)
Flash rom, then flash Google Apps.
Flash sdcard emulate patch at this point if you don't have sdcard (Skip this if you have sdcard)
Reboot.
After reboot if your gps doesn't fix properly please use FasterGPS to change gps config to your region
Download Link
2013/12/07
cm-10.2-20131206-UNOFFICIAL-p768.zip md5:24c54c3cf77f69604d83dd130fd40a6a
Bugs / known issues
CM 10.2 bugs
1080 video recording not work
Camera will not work if no sdcard in phone, please select emulate internal sdcard from installer
Version History
2013/12/07 - Fix sound record volume is too low - Thanks Artas182x
2013/12/05 - Update to CM 10.2
2013/11/28 - Update to CM 10.2 RC1
2013/11/21 - Bug fix
Fix bluetooth audio
Calling volume adjust
GPS config update
Disable Scissor renderer for SGX540
2013/11/17 - Update to CM 10.2 M1
2013/09/28 - Add kernel mod
OC - 300, 600, 800, 1008, 1200 Not OC by default, must select max 1200 in Performance menu
UV - 925, 1075, 1175, 1275, 1350
Add SIO, SIOPLUS, FIFO, ROW and VR I/O scheduler
Add sanjose, lazy, interactiveX, wheatley, ondemandx, pegasusq, adaptive, adaptivex, smartass2, zenx and abyssplug CPU Governor
UMS (external), MTP (internal/external) and PTP all work, default to UMS, you can select MTP/PTP from "System Setting" > "Storage" > "Usb computer connection", I suppress old ICS UMS dialog so don't panic when it open and then suddenly close itself (no better solution for now, I do this because I don't want anyone to open it and press USB connect button. It'll unmount sdcard).
Bugs
Camera will not work if no sdcard in phone
2013/09/16 - Initial release
Original Kernel 30.0.31 CM+ for OMAP board.
Jellybean 4.3
Swap internal/external sdcard + access sdcard via MTP
Home button wake phone (you can disable this in Display setting)
Reduce headset volume and increase speaker volume
Bugs
Camera will not work if no sdcard in phone
Credits
Cyanogenmod for ROM and P760 device tree which I modified it to P768
AntonX for serveral bugs fix.
artas182x for default sound profile values
HOW TO
Flash over last version
You can flash new version over old version
Put rom & gapps for CM10.1 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Flash this ROM over CM10.1
Put rom & gapps for CM10.2 in sdcard
Boot to recovery
Wipe cache & dalvik cache
Flash rom & gapps
Reboot
Enable OC, change I/O scheduler and change CPU governor
You need to enable developer mode on your phone, do it by
Goto "System Setting" > "About phone" > Tap 7 times on "Build number". You're now enable developer mode.
Goto "System Setting" > "Performance"
Enable OC by select "Processor" and set "Maximum CPU frequency" to 1200
You can also change CPU governor in that page, about what is it please refer to http://forum.xda-developers.com/showthread.php?t=1792369 and http://translate.google.com/transla...013/01/governor-scheduler-tcp-bejegyzest.html
You can change IO scheduler in "I/O scheduler", please read about it at https://www.vincentkong.com/wiki/android/android-io-schedulers/
Please test all changes before select "Set on Boot" because if something go wrong you can reboot your phone to revert it.
Cannot connect to wireless access point
This problem mostly occur when you got some error at first boot. The problem is error interrupt startup service to write proper MAC address data to file. Your wifi mac address will be 00:00:00:00:00:00
Use file manager or adb to delete /data/misc/wifi folder from your phone
Reboot (disconnect usb cable to make sure there're no error at startup)
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
My battery life on 10.1.3 is better than stock (3G on) after use it for a while. After flash CM I notice that first day my battery life is not good as I expected. So I install cpu spy and wakelock detector to see what the problem. My phone don't go to deep sleep mode and that because of some apps (Line, Google keep, ...). I try to use it for a few day and the deep sleep problem gone, don't know why. The battery life is good when my phone enter deep sleep when I don't use it.
mato_d007 said:
Great, gonna test and report later.
EDIT: Reporting
Bugs:
1-CyanogenMod account remote wipe does not work, nothing happens. Location works fine btw.
2-When downloading (eg an app from market) under wi-fi, it eats all the connection. I cannot download another thing or visit a web for a couple of seconds. Sometimes it gives a time out error, other times takes a while to start to download. If you dont download many things simultaneously you wont notice this. This could a problem with my router, but i dont recall this happening before with my old Defy.
3-ADB wont work on Windows 8 x64 for me, tried different drivers but LG E2 USB device never gets installed correctly.
4-GPS can only see 2 sat and never locks position.
N°2, 3 and 4 are bugs that i experienced also on the p760 version of CM10.2
Aside from those bugs, everything else seems to work perfectly, great work.
Click to expand...
Click to collapse
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
donk165 said:
So how is 10.2 over 10.1.3? I'm using 10.1.3 and having no issues, I find the battery life to be slightly less than stock, mainly when 3G data is left on. I've disabled location access via 3G and WiFi and that has helped a little, Google Now is off also.
Is the battery life any better on 10.2? I found going from 4.2 to 4.3 on my nexus 7 to gave no benefits.
Also, to prevent posts in this thread of people getting security errors, I think it would be a good idea to link the bootloader unlock guide in the OP.
Sent from my LG-P768 using xda app-developers app
Click to expand...
Click to collapse
In my case is like artit says, better battery life than stock (tough i use mostly wi fi and a bit of 3G), on deep sleep it only eats about 1% per hour, about 10.1.3 i dont see many diferences tbh, both of them works fine on our devices luckily. The battery life with the screen on all the time (playing games, surfing, messaging, etc) its 5 hours approx. Without touching it on deep sleep you can reach 24+ hours. Forgot to mention that i use many accounts (FB,G+, LINE, whatsapp, Skype, Cyano, Twitter) and i have auto sync activated always. Its a very good rom a good daily driver if you dont care much about the gps problems.
artit said:
All that bugs come from CM 10.2, I just build it for those who want to test. I'll rebuild it again in a week or so to add any bug fix from CM (if any).
For GPS there're some people in P760 thread posted that it work with some fix. I don't test it yet.
Click to expand...
Click to collapse
Yeah like i said, i experienced those bugs previously on the p760 version but i reported them here so everyone can see them. Thanks for taking the time to build this version.
I tried the suggested fix for GPS bug (modify the gps.conf file) but sadly, it didnt helped in my case.
Thank you for the replies guys. Ill try what you suggested about wakelock checking and using CPU spy, I'm sure I need to turn off a few Google apps or at least their syncing.
I'll try out this 10.2 version once I have everything fully setup to my liking on 10.1, then I can make a backup and switch back if needs be.
I wasn't aware of a GPS problem, but to be honest, I don't really use GPS.
Sent from my LG-P768 using xda app-developers app
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
aloy99 said:
Hey, how did you get the camera to work in CM10? Thanks
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
artit said:
I replaced /system/vendor/firmware/ducati_m3.bin from P768 ICS stock rom.
Click to expand...
Click to collapse
I thought you said it only work with stock ROMs and not CM based ROMs?
EDIT: I found your patch, thanks a bunch
Sent from my LG-P760 using xda app-developers app
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I don't use this rom recently and build it only for testing so there may be bugs. I'll try to reproduce your issue and update source from CM to see if it's fixed.
IMO, stable version is more suitable for daily use. That's why I focus on stable version because I don't want to build CM nightly every 2-3 days.
donk165 said:
I seem to be haivng a problem keeping 10.2 installed. I have tried a clean install by wiping all directories but external_SD, and then installed 10.2, then gapps, then wiped caches and booted. I can boot up and use the phone fine but as soon as I turn it off, it just gets stuck on the LG logo on the bootup. I have tried fixing permissions and rewiping caches. I have also tried to go from 10.1 to 10.2 without data wiping and I get the same results, great first time round, doesnt boot after switching off. I have also tried full wipes, then install CM + GAPPS, then advanced restore just data from 10.1 then wipe caches then boot. Again with the same results!
Does anyone have any suggestions to keep CM10.2 working for me? (Other than never switching it off )
Thanks, donk165
Click to expand...
Click to collapse
I can't reproduce your issue. Umm... struct at LG logo, it's seem that there're something wrong about kernel or initialization files. What steps you did to get that problem?
I do following
- CWM back my CM 10.1.3 RC2 (I did it last week)
- Reboot to recovery
- Do full wipe, cache, dalvik cache, user data/factory reset then format /system (in mount/unmount menu)
- Install CM 10.2
- Install GApps for CM 10.2, gapps-jb-20130813-signed.zip **** Not the same as for CM 10.1
- Reboot
- Login to CM account & google
- Install some app
- Do 2-3 reboot without problem
Then I test restore data from CM 10.1.3 RC2
- Reboot to recovery
- Advance restore from external sdcard
- Restore /data
- Reboot
- Re-login to CM account
- Phone work fine, but first reboot is longer than normal.
- Try to reboot 1-2 times, no problem.
Did anyone get this problem as donk165?
New build is up. I also include some kernel mod from my CM 10.1.3 for P768 rom and a sdcard re-enable patch for those that has no sdcard.
GPS work but took a long time. I'm not on this rom just test it and flash other one. If you have issue you can post here.
Re-upload latest release because it has minor error for UMS on windows. I fixed it now.
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
bahram360 said:
Do i is Necessary overclock to 1200?But i not want to overclock.i just set to 1008.
speed processor That is 2 dual 1024.
Is there a problem ?
Click to expand...
Click to collapse
You don't need to OC, this rom default max frequency is 1008. If you don't want to OC just leave the value stay at 1008.
for save battery on this rom What I do?
and if overclock for always this will damage?
bahram360 said:
for save battery on this rom What I do?
and if overclock for always this will damage?
Click to expand...
Click to collapse
No need to do anything to rom configuration because it's a little bit Under Volt (UV) as I state in OP. It's should use less battery than official configuration.
If you still have battery drain problem, it almost come from phone not go into deep sleep mode. There're some app in your phone that keep phone awake. To find out what that app is, you can install "WakeLock detector" along with "CPU spy" to see if you phone goto deep sleep while screen off (CPU spy) and if not what is the problem (Wakelock detector).
For OC I don't use it but it shouldn't damage our phone. I also don't OC GPU because there're no preference for user to disable it.
I still can't get this Rom to stay booting. I can boot up after the install but once I reboot, it gets stuck on the LG logo. TWRP still works though so I can save my phone. But 10.2 doesn't like my phone. Its weird because 10.1 is fine.
My nexus also died when I put 4.3 on there, maybe 4.3 just doesn't like me lol.
Sent from my LG-P768 using xda app-developers app
I use Honamify ROM and Link2SD perfectly work.
I've tried everything I found in Development forum for all day but still can't enable ART.
Please help me.
Device: WT19i
ROM: Honamify (Version 2)
a1b2c3901 said:
I use Honamify ROM and Link2SD perfectly work.
I've tried everything I found in Development forum for all day but still can't enable ART.
Please help me.
Device: WT19i
ROM: Honamify (Version 2)
Click to expand...
Click to collapse
bro ART is only experimental. its not usable for normal usgae.
install a clean LX bulid (honamify rom has to many additions) then u can use art for some time
AFTER INSTALLING MORE THAN 3-5 userapps or using app2sd other mods FORGET ABOUT ART!!!!
First you need to enable development option. Go to setting, about phone, tap 7 times on build number (when tapping several times, there will be message notice you need to tap .... time to enable development)
Then you can choose ART instead Davilk in RUntime (in development)
Notice that you have to do that soon when you install your ROM to be sure not confict with much application you setup later.
And when changing to ART require a very long time for first reboot.
Meohamchoi said:
First you need to enable development option. Go to setting, about phone, tap 7 times on build number (when tapping several times, there will be message notice you need to tap .... time to enable development)
Then you can choose ART instead Davilk in RUntime (in development)
Notice that you have to do that soon when you install your ROM to be sure not confict with much application you setup later.
And when changing to ART require a very long time for first reboot.
Click to expand...
Click to collapse
I've tried that already...
I'm using Honimify v2 like you too.
First, do you see Development option. If not try to enable it.
Then try to enable ART in runtime select.
The only problem with ART is it need alot of space. Especially with Facebook
Thanks guys. I enabled ART successfully!!
I just reflash the ROM and enable ART with no other activity.:laugh:
System UI is really smooth!!
to run ART well, you should using mounts2SD to transfer cache and other system apps from internal memory to your SD card.
After using it, no longer worry about low memory to install apps.
First backup your data from SD to your computer (should copy in MSC mode)
Then partition your SD card to 2 part. 1 in FAT 32; 1 in EXT4 (about 2GB is enough). If you don't have a card reader (most laptop help) you can using Aparted (an apps to partition your SD card directly form your phone, searching it on google play). You can also create a SWAP partition (to swap RAM) if your SD card is fast enough.
Second you can using mounts2SD to setup other things. The first reboot will take long time. But later is OK.
You can do all these thing when your phone memory become full due to many apps install . With ART turn on, about 5 apps install will take almost your phone memory.
My phone using honimify v2 (base on Mike rom CM11.0).
does art really makes different in gaming? i installed art last week and titanium backup force close so as other apps.. most of the time it force close..
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app
ART work well, loading faster. switching between game and main screen good.